* Do not discard query parameters that form a hash with the same root key as
the `wrapper_key` for a request using `wrap_parameters`.
*Josh Jordan*
* Add `:serializer` option for `config.session_store :cookie_store`. This
changes default serializer when using `:cookie_store`.
It is possible to pass:
* `:json` which is a secure wrapper on JSON using `JSON.parse` and
`JSON.generate` methods with quirks mode;
* `:marshal` which is a wrapper on Marshal;
* serializer class with `load` and `dump` methods defined.
For new apps `:json` option is added by default and :marshal is used
when no option is specified.
*Łukasz Sarnacki*, *Matt Aimonetti*
* Ensure that `request.filtered_parameters` is reset between calls to `process`
in `ActionController::TestCase`.
Fixes #13803.
*Andrew White*
* Fix `rake routes` error when `Rails::Engine` with empty routes is mounted.
Fixes #13810.
*Maurizio De Santis*
* Log which keys were affected by deep munge.
Deep munge solves CVE-2013-0155 security vulnerability, but its
behaviour is definately confusing, so now at least information
about for which keys values were set to nil is visible in logs.
*Łukasz Sarnacki*
* Automatically convert dashes to underscores for shorthand routes, e.g:
get '/our-work/latest'
When running `rake routes` you will get the following output:
Prefix Verb URI Pattern Controller#Action
our_work_latest GET /our-work/latest(.:format) our_work#latest
*Mikko Johansson*
* Automatically convert dashes to underscores for url helpers, e.g:
get '/contact-us' => 'pages#contact'
get '/about-us' => 'pages#about_us'
When running `rake routes` you will get the following output:
Prefix Verb URI Pattern Controller#Action
contact_us GET /contact-us(.:format) pages#contact
about_us GET /about-us(.:format) pages#about_us
*Amr Tamimi*
* Fix stream closing when sending file with `ActionController::Live` included.
Fixes #12381
*Alessandro Diaferia*
* Allow an absolute controller path inside a module scope. Fixes #12777.
Example:
namespace :foo do
# will route to BarController without the namespace.
get '/special', to: '/bar#index'
end
* Unique the segment keys array for non-optimized url helpers
In Rails 3.2 you only needed pass an argument for dynamic segment once so
unique the segment keys array to match the number of args. Since the number
of args is less than required parts the non-optimized code path is selected.
This means to benefit from optimized url generation the arg needs to be
specified as many times as it appears in the path.
Fixes #12808.
*Andrew White*
* Show full route constraints in error message.
When an optimized helper fails to generate, show the full route constraints
in the error message. Previously it would only show the contraints that were
required as part of the path.
Fixes #13592.
*Andrew White*
* Use a custom route visitor for optimized url generation. Fixes #13349.
*Andrew White*
* Allow engine root relative redirects using an empty string.
Example:
# application routes.rb
mount BlogEngine => '/blog'
# engine routes.rb
get '/welcome' => redirect('')
This now redirects to the path `/blog`, whereas before it would redirect
to the application root path. In the case of a path redirect or a custom
redirect if the path returned contains a host then the path is treated as
absolute. Similarly for option redirects, if the options hash returned
contains a `:host` or `:domain` key then the path is treated as absolute.
Fixes #7977.
*Andrew White*
* Fix `Encoding::CompatibilityError` when public path is UTF-8
In #5337 we forced the path encoding to ASCII-8BIT to prevent static file handling
from blowing up before an application has had chance to deal with possibly invalid
urls. However this has a negative side effect of making it an incompatible encoding
if the application's public path has UTF-8 characters in it.
To work around the problem we check to see if the path has a valid encoding once
it has been unescaped. If it is not valid then we can return early since it will
not match any file anyway.
Fixes #13518.
*Andrew White*
* `ActionController::Parameters#permit!` permits hashes in array values.
*Xavier Noria*
* Converts hashes in arrays of unfiltered params to unpermitted params.
Fixes #13382.
*Xavier Noria*
* New config option to opt out of params "deep munging" that was used to
address security vulnerability CVE-2013-0155. In your app config:
config.action_dispatch.perform_deep_munge = false
Take care to understand the security risk involved before disabling this.
[Read more.](https://groups.google.com/forum/#!topic/rubyonrails-security/t1WFuuQyavI)
*Bernard Potocki*
* `rake routes` shows routes defined under assets prefix.
*Ryunosuke SATO*
* Extend cross-site request forgery (CSRF) protection to GET requests with
JavaScript responses, protecting apps from cross-origin `<script>` tags.
*Jeremy Kemper*
* Fix generating a path for engine inside a resources block.
Fixes #8533.
*Piotr Sarnacki*
* Add `Mime::Type.register "text/vcard", :vcf` to the default list of mime types.
*DHH*
* Remove deprecated `ActionController::RecordIdentifier`, use
`ActionView::RecordIdentifier` instead.
*kennyj*
* Fix regression when using `ActionView::Helpers::TranslationHelper#translate` with
`options[:raise]`.
This regression was introduced at ec16ba75a5493b9da972eea08bae630eba35b62f.
*Shota Fukumori (sora_h)*
* Introducing Variants
We often want to render different html/json/xml templates for phones,
tablets, and desktop browsers. Variants make it easy.
The request variant is a specialization of the request format, like `:tablet`,
`:phone`, or `:desktop`.
You can set the variant in a `before_action`:
request.variant = :tablet if request.user_agent =~ /iPad/
Respond to variants in the action just like you respond to formats:
respond_to do |format|
format.html do |html|
html.tablet # renders app/views/projects/show.html+tablet.erb
html.phone { extra_setup; render ... }
end
end
Provide separate templates for each format and variant:
app/views/projects/show.html.erb
app/views/projects/show.html+tablet.erb
app/views/projects/show.html+phone.erb
You can also simplify the variants definition using the inline syntax:
respond_to do |format|
format.js { render "trash" }
format.html.phone { redirect_to progress_path }
format.html.none { render "trash" }
end
Variants also support common `any`/`all` block that formats have.
It works for both inline:
respond_to do |format|
format.html.any { render text: "any" }
format.html.phone { render text: "phone" }
end
and block syntax:
respond_to do |format|
format.html do |variant|
variant.any(:tablet, :phablet){ render text: "any" }
variant.phone { render text: "phone" }
end
end
*Łukasz Strzałkowski*
* Fix render of localized templates without an explicit format using wrong
content header and not passing correct formats to template due to the
introduction of the `NullType` for mimes.
Templates like `hello.it.erb` were subject to this issue.
Fixes #13064.
*Angelo Capilleri*, *Carlos Antonio da Silva*
* Try to escape each part of a url correctly when using a redirect route.
Fixes #13110.
*Andrew White*
* Better error message for typos in assert_response argument.
When the response type argument to `assert_response` is not a known
response type, `assert_response` now throws an ArgumentError with a clear
message. This is intended to help debug typos in the response type.
*Victor Costan*
* Fix formatting for `rake routes` when a section is shorter than a header.
*Sıtkı Bağdat*
* Take a hash with options inside array in `#url_for`.
Example:
url_for [:new, :admin, :post, { param: 'value' }]
# => http://example.com/admin/posts/new?param=value
*Andrey Ognevsky*
* Add `session#fetch` method
fetch behaves like [Hash#fetch](http://www.ruby-doc.org/core-1.9.3/Hash.html#method-i-fetch).
It returns a value from the hash for the given key.
If the key can’t be found, there are several options:
* With no other arguments, it will raise an KeyError exception.
* If a default value is given, then that will be returned.
* If the optional code block is specified, then that will be run and its result returned.
*Damien Mathieu*
* Don't let strong parameters mutate the given hash via `fetch`
Create a new instance if the given parameter is a `Hash` instead of
passing it to the `convert_hashes_to_parameters` method since it is
overriding its default value.
*Brendon Murphy*, *Doug Cole*
* Add `params` option to `button_to` form helper, which renders the given hash
as hidden form fields.
*Andy Waite*
* Make assets helpers work in the controllers like it works in the views.
Example:
# config/application.rb
config.asset_host = 'http://mycdn.com'
ActionController::Base.helpers.asset_path('fallback.png')
# => http://mycdn.com/assets/fallback.png
Fixes #10051.
*Tima Maslyuchenko*
* Respect `SCRIPT_NAME` when using `redirect` with a relative path
Example:
# application routes.rb
mount BlogEngine => '/blog'
# engine routes.rb
get '/admin' => redirect('admin/dashboard')
This now redirects to the path `/blog/admin/dashboard`, whereas before it would've
generated an invalid url because there would be no slash between the host name and
the path. It also allows redirects to work where the application is deployed to a
subdirectory of a website.
Fixes #7977.
*Andrew White*
* Fixing repond_with working directly on the options hash
This fixes an issue where the respond_with worked directly with the given
options hash, so that if a user relied on it after calling respond_with,
the hash wouldn't be the same.
Fixes #12029.
*bluehotdog*
* Fix `ActionDispatch::RemoteIp::GetIp#calculate_ip` to only check for spoofing
attacks if both `HTTP_CLIENT_IP` and `HTTP_X_FORWARDED_FOR` are set.
Fixes #10844.
*Tamir Duberstein*
* Strong parameters should permit nested number as key.
Fixes #12293.
*kennyj*
* Fix regex used to detect URI schemes in `redirect_to` to be consistent with
RFC 3986.
*Derek Prior*
* Fix incorrect `assert_redirected_to` failure message for protocol-relative
URLs.
*Derek Prior*
* Fix an issue where router can't recognize downcased url encoding path.
Fixes #12269.
*kennyj*
* Fix custom flash type definition. Misusage of the `_flash_types` class variable
caused an error when reloading controllers with custom flash types.
Fixes #12057.
*Ricardo de Cillo*
* Do not break params filtering on `nil` values.
Fixes #12149.
*Vasiliy Ermolovich*
* Development mode exceptions are rendered in text format in case of XHR request.
*Kir Shatrov*
* Fix an issue where :if and :unless controller action procs were being run
before checking for the correct action in the :only and :unless options.
Fixes #11799.
*Nicholas Jakobsen*
* Fix an issue where `assert_dom_equal` and `assert_dom_not_equal` were
ignoring the passed failure message argument.
Fixes #11751.
*Ryan McGeary*
* Allow REMOTE_ADDR, HTTP_HOST and HTTP_USER_AGENT to be overridden from
the environment passed into `ActionDispatch::TestRequest.new`.
Fixes #11590.
*Andrew White*
* Fix an issue where Journey was failing to clear the named routes hash when the
routes were reloaded and since it doesn't overwrite existing routes then if a
route changed but wasn't renamed it kept the old definition. This was being
masked by the optimised url helpers so it only became apparent when passing an
options hash to the url helper.
*Andrew White*
* Skip routes pointing to a redirect or mounted application when generating urls
using an options hash as they aren't relevant and generate incorrect urls.
Fixes #8018.
*Andrew White*
* Move `MissingHelperError` out of the `ClassMethods` module.
*Yves Senn*
* Fix an issue where rails raise exception about missing helper where it
should throw `LoadError`. When helper file exists and only loaded file from
this helper does not exist rails should throw LoadError instead of
`MissingHelperError`.
*Piotr Niełacny*
* Fix `ActionDispatch::ParamsParser#parse_formatted_parameters` to rewind body input stream on
parsing json params.
Fixes #11345.
*Yuri Bol*, *Paul Nikitochkin*
* Ignore spaces around delimiter in Set-Cookie header.
*Yamagishi Kazutoshi*
* Remove deprecated Rails application fallback for integration testing, set
`ActionDispatch.test_app` instead.
*Carlos Antonio da Silva*
* Remove deprecated `page_cache_extension` config.
*Francesco Rodriguez*
* Remove deprecated constants from Action Controller:
ActionController::AbstractRequest => ActionDispatch::Request
ActionController::Request => ActionDispatch::Request
ActionController::AbstractResponse => ActionDispatch::Response
ActionController::Response => ActionDispatch::Response
ActionController::Routing => ActionDispatch::Routing
ActionController::Integration => ActionDispatch::Integration
ActionController::IntegrationTest => ActionDispatch::IntegrationTest
*Carlos Antonio da Silva*
* Fix `Mime::Type.parse` when bad accepts header is looked up. Previously it
was setting `request.formats` with an array containing a `nil` value, which
raised an error when setting the controller formats.
Fixes #10965.
*Becker*
* Merge `:action` from routing scope and assign endpoint if both `:controller`
and `:action` are present. The endpoint assignment only occurs if there is
no `:to` present in the options hash so should only affect routes using the
shorthand syntax (i.e. endpoint is inferred from the path).
Fixes #9856.
*Yves Senn*, *Andrew White*
* Action View extracted from Action Pack.
*Piotr Sarnacki*, *Łukasz Strzałkowski*
Please check [4-0-stable](https://github.com/rails/rails/blob/4-0-stable/actionpack/CHANGELOG.md) for previous changes.