|
|
/* ========================================
* Monitoring - Monitoring.h
* Copyright (c) 2016 airwindows, All rights reserved
* ======================================== */
#ifndef __Monitoring_H
#include "Monitoring.h"
#endif
void Monitoring::processReplacing(float **inputs, float **outputs, VstInt32 sampleFrames)
{
float* in1 = inputs[0];
float* in2 = inputs[1];
float* out1 = outputs[0];
float* out2 = outputs[1];
double overallscale = 1.0;
overallscale /= 44100.0;
overallscale *= getSampleRate();
int processing = (VstInt32)( A * 16.999 );
int am = (int)149.0 * overallscale;
int bm = (int)179.0 * overallscale;
int cm = (int)191.0 * overallscale;
int dm = (int)223.0 * overallscale; //these are 'good' primes, spacing out the allpasses
int allpasstemp;
//for PeaksOnly
biquadL[0] = 0.0375/overallscale; biquadL[1] = 0.1575; //define as AURAT, MONORAT, MONOLAT unless overridden
if (processing == 7) {biquadL[0] = 0.0385/overallscale; biquadL[1] = 0.0825;}
if (processing == 11) {biquadL[0] = 0.1245/overallscale; biquadL[1] = 0.46;}
double K = tan(M_PI * biquadL[0]);
double norm = 1.0 / (1.0 + K / biquadL[1] + K * K);
biquadL[2] = K / biquadL[1] * norm;
biquadL[4] = -biquadL[2]; //for bandpass, ignore [3] = 0.0
biquadL[5] = 2.0 * (K * K - 1.0) * norm;
biquadL[6] = (1.0 - K / biquadL[1] + K * K) * norm;
//for Bandpasses
biquadR[0] = 0.0375/overallscale; biquadR[1] = 0.1575; //define as AURAT, MONORAT, MONOLAT unless overridden
if (processing == 7) {biquadR[0] = 0.0385/overallscale; biquadR[1] = 0.0825;}
if (processing == 11) {biquadR[0] = 0.1245/overallscale; biquadR[1] = 0.46;}
K = tan(M_PI * biquadR[0]);
norm = 1.0 / (1.0 + K / biquadR[1] + K * K);
biquadR[2] = K / biquadR[1] * norm;
biquadR[4] = -biquadR[2]; //for bandpass, ignore [3] = 0.0
biquadR[5] = 2.0 * (K * K - 1.0) * norm;
biquadR[6] = (1.0 - K / biquadR[1] + K * K) * norm;
//for Bandpasses
while (--sampleFrames >= 0)
{
long double inputSampleL = *in1;
long double inputSampleR = *in2;
if (fabs(inputSampleL)<1.18e-37) inputSampleL = fpd * 1.18e-37;
if (fabs(inputSampleR)<1.18e-37) inputSampleR = fpd * 1.18e-37;
switch (processing)
{
case 0:
case 1:
break;
case 2:
if (inputSampleL > 1.0) inputSampleL = 1.0; if (inputSampleL < -1.0) inputSampleL = -1.0; inputSampleL = asin(inputSampleL);
if (inputSampleR > 1.0) inputSampleR = 1.0; if (inputSampleR < -1.0) inputSampleR = -1.0; inputSampleR = asin(inputSampleR);
//amplitude aspect
allpasstemp = ax - 1; if (allpasstemp < 0 || allpasstemp > am) allpasstemp = am;
inputSampleL -= aL[allpasstemp]*0.5; aL[ax] = inputSampleL; inputSampleL *= 0.5;
inputSampleR -= aR[allpasstemp]*0.5; aR[ax] = inputSampleR; inputSampleR *= 0.5;
ax--; if (ax < 0 || ax > am) {ax = am;}
inputSampleL += (aL[ax]);
inputSampleR += (aR[ax]);
//a single Midiverb-style allpass
if (inputSampleL > 1.0) inputSampleL = 1.0; if (inputSampleL < -1.0) inputSampleL = -1.0; inputSampleL = asin(inputSampleL);
if (inputSampleR > 1.0) inputSampleR = 1.0; if (inputSampleR < -1.0) inputSampleR = -1.0; inputSampleR = asin(inputSampleR);
//amplitude aspect
allpasstemp = bx - 1; if (allpasstemp < 0 || allpasstemp > bm) allpasstemp = bm;
inputSampleL -= bL[allpasstemp]*0.5; bL[bx] = inputSampleL; inputSampleL *= 0.5;
inputSampleR -= bR[allpasstemp]*0.5; bR[bx] = inputSampleR; inputSampleR *= 0.5;
bx--; if (bx < 0 || bx > bm) {bx = bm;}
inputSampleL += (bL[bx]);
inputSampleR += (bR[bx]);
//a single Midiverb-style allpass
if (inputSampleL > 1.0) inputSampleL = 1.0; if (inputSampleL < -1.0) inputSampleL = -1.0; inputSampleL = asin(inputSampleL);
if (inputSampleR > 1.0) inputSampleR = 1.0; if (inputSampleR < -1.0) inputSampleR = -1.0; inputSampleR = asin(inputSampleR);
//amplitude aspect
allpasstemp = cx - 1; if (allpasstemp < 0 || allpasstemp > cm) allpasstemp = cm;
inputSampleL -= cL[allpasstemp]*0.5; cL[cx] = inputSampleL; inputSampleL *= 0.5;
inputSampleR -= cR[allpasstemp]*0.5; cR[cx] = inputSampleR; inputSampleR *= 0.5;
cx--; if (cx < 0 || cx > cm) {cx = cm;}
inputSampleL += (cL[cx]);
inputSampleR += (cR[cx]);
//a single Midiverb-style allpass
if (inputSampleL > 1.0) inputSampleL = 1.0; if (inputSampleL < -1.0) inputSampleL = -1.0; inputSampleL = asin(inputSampleL);
if (inputSampleR > 1.0) inputSampleR = 1.0; if (inputSampleR < -1.0) inputSampleR = -1.0; inputSampleR = asin(inputSampleR);
//amplitude aspect
allpasstemp = dx - 1; if (allpasstemp < 0 || allpasstemp > dm) allpasstemp = dm;
inputSampleL -= dL[allpasstemp]*0.5; dL[dx] = inputSampleL; inputSampleL *= 0.5;
inputSampleR -= dR[allpasstemp]*0.5; dR[dx] = inputSampleR; inputSampleR *= 0.5;
dx--; if (dx < 0 || dx > dm) {dx = dm;}
inputSampleL += (dL[dx]);
inputSampleR += (dR[dx]);
//a single Midiverb-style allpass
if (inputSampleL > 1.0) inputSampleL = 1.0; if (inputSampleL < -1.0) inputSampleL = -1.0; inputSampleL = asin(inputSampleL);
if (inputSampleR > 1.0) inputSampleR = 1.0; if (inputSampleR < -1.0) inputSampleR = -1.0; inputSampleR = asin(inputSampleR);
//amplitude aspect
inputSampleL *= 0.63679; inputSampleR *= 0.63679; //scale it to 0dB output at full blast
//PeaksOnly
break;
case 3:
double trim;
trim = 2.302585092994045684017991; //natural logarithm of 10
long double slewSample; slewSample = (inputSampleL - lastSampleL)*trim;
lastSampleL = inputSampleL;
if (slewSample > 1.0) slewSample = 1.0; if (slewSample < -1.0) slewSample = -1.0;
inputSampleL = slewSample;
slewSample = (inputSampleR - lastSampleR)*trim;
lastSampleR = inputSampleR;
if (slewSample > 1.0) slewSample = 1.0; if (slewSample < -1.0) slewSample = -1.0;
inputSampleR = slewSample;
//SlewOnly
break;
case 4:
double iirAmount; iirAmount = (2250/44100.0) / overallscale;
double gain; gain = 1.42;
inputSampleL *= gain; inputSampleR *= gain; gain = ((gain-1)*0.75)+1;
iirSampleAL = (iirSampleAL * (1.0-iirAmount)) + (inputSampleL * iirAmount); inputSampleL = iirSampleAL;
iirSampleAR = (iirSampleAR * (1.0-iirAmount)) + (inputSampleR * iirAmount); inputSampleR = iirSampleAR;
inputSampleL *= gain; inputSampleR *= gain; gain = ((gain-1)*0.75)+1;
if (inputSampleL > 1.0) inputSampleL = 1.0; if (inputSampleL < -1.0) inputSampleL = -1.0;
if (inputSampleR > 1.0) inputSampleR = 1.0; if (inputSampleR < -1.0) inputSampleR = -1.0;
iirSampleBL = (iirSampleBL * (1.0-iirAmount)) + (inputSampleL * iirAmount); inputSampleL = iirSampleBL;
iirSampleBR = (iirSampleBR * (1.0-iirAmount)) + (inputSampleR * iirAmount); inputSampleR = iirSampleBR;
inputSampleL *= gain; inputSampleR *= gain; gain = ((gain-1)*0.75)+1;
if (inputSampleL > 1.0) inputSampleL = 1.0; if (inputSampleL < -1.0) inputSampleL = -1.0;
if (inputSampleR > 1.0) inputSampleR = 1.0; if (inputSampleR < -1.0) inputSampleR = -1.0;
iirSampleCL = (iirSampleCL * (1.0-iirAmount)) + (inputSampleL * iirAmount); inputSampleL = iirSampleCL;
iirSampleCR = (iirSampleCR * (1.0-iirAmount)) + (inputSampleR * iirAmount); inputSampleR = iirSampleCR;
inputSampleL *= gain; inputSampleR *= gain; gain = ((gain-1)*0.75)+1;
if (inputSampleL > 1.0) inputSampleL = 1.0; if (inputSampleL < -1.0) inputSampleL = -1.0;
if (inputSampleR > 1.0) inputSampleR = 1.0; if (inputSampleR < -1.0) inputSampleR = -1.0;
iirSampleDL = (iirSampleDL * (1.0-iirAmount)) + (inputSampleL * iirAmount); inputSampleL = iirSampleDL;
iirSampleDR = (iirSampleDR * (1.0-iirAmount)) + (inputSampleR * iirAmount); inputSampleR = iirSampleDR;
inputSampleL *= gain; inputSampleR *= gain; gain = ((gain-1)*0.75)+1;
if (inputSampleL > 1.0) inputSampleL = 1.0; if (inputSampleL < -1.0) inputSampleL = -1.0;
if (inputSampleR > 1.0) inputSampleR = 1.0; if (inputSampleR < -1.0) inputSampleR = -1.0;
iirSampleEL = (iirSampleEL * (1.0-iirAmount)) + (inputSampleL * iirAmount); inputSampleL = iirSampleEL;
iirSampleER = (iirSampleER * (1.0-iirAmount)) + (inputSampleR * iirAmount); inputSampleR = iirSampleER;
inputSampleL *= gain; inputSampleR *= gain; gain = ((gain-1)*0.75)+1;
if (inputSampleL > 1.0) inputSampleL = 1.0; if (inputSampleL < -1.0) inputSampleL = -1.0;
if (inputSampleR > 1.0) inputSampleR = 1.0; if (inputSampleR < -1.0) inputSampleR = -1.0;
iirSampleFL = (iirSampleFL * (1.0-iirAmount)) + (inputSampleL * iirAmount); inputSampleL = iirSampleFL;
iirSampleFR = (iirSampleFR * (1.0-iirAmount)) + (inputSampleR * iirAmount); inputSampleR = iirSampleFR;
inputSampleL *= gain; inputSampleR *= gain; gain = ((gain-1)*0.75)+1;
if (inputSampleL > 1.0) inputSampleL = 1.0; if (inputSampleL < -1.0) inputSampleL = -1.0;
if (inputSampleR > 1.0) inputSampleR = 1.0; if (inputSampleR < -1.0) inputSampleR = -1.0;
iirSampleGL = (iirSampleGL * (1.0-iirAmount)) + (inputSampleL * iirAmount); inputSampleL = iirSampleGL;
iirSampleGR = (iirSampleGR * (1.0-iirAmount)) + (inputSampleR * iirAmount); inputSampleR = iirSampleGR;
inputSampleL *= gain; inputSampleR *= gain; gain = ((gain-1)*0.75)+1;
if (inputSampleL > 1.0) inputSampleL = 1.0; if (inputSampleL < -1.0) inputSampleL = -1.0;
if (inputSampleR > 1.0) inputSampleR = 1.0; if (inputSampleR < -1.0) inputSampleR = -1.0;
iirSampleHL = (iirSampleHL * (1.0-iirAmount)) + (inputSampleL * iirAmount); inputSampleL = iirSampleHL;
iirSampleHR = (iirSampleHR * (1.0-iirAmount)) + (inputSampleR * iirAmount); inputSampleR = iirSampleHR;
inputSampleL *= gain; inputSampleR *= gain; gain = ((gain-1)*0.75)+1;
if (inputSampleL > 1.0) inputSampleL = 1.0; if (inputSampleL < -1.0) inputSampleL = -1.0;
if (inputSampleR > 1.0) inputSampleR = 1.0; if (inputSampleR < -1.0) inputSampleR = -1.0;
iirSampleIL = (iirSampleIL * (1.0-iirAmount)) + (inputSampleL * iirAmount); inputSampleL = iirSampleIL;
iirSampleIR = (iirSampleIR * (1.0-iirAmount)) + (inputSampleR * iirAmount); inputSampleR = iirSampleIR;
inputSampleL *= gain; inputSampleR *= gain; gain = ((gain-1)*0.75)+1;
if (inputSampleL > 1.0) inputSampleL = 1.0; if (inputSampleL < -1.0) inputSampleL = -1.0;
if (inputSampleR > 1.0) inputSampleR = 1.0; if (inputSampleR < -1.0) inputSampleR = -1.0;
iirSampleJL = (iirSampleJL * (1.0-iirAmount)) + (inputSampleL * iirAmount); inputSampleL = iirSampleJL;
iirSampleJR = (iirSampleJR * (1.0-iirAmount)) + (inputSampleR * iirAmount); inputSampleR = iirSampleJR;
inputSampleL *= gain; inputSampleR *= gain; gain = ((gain-1)*0.75)+1;
if (inputSampleL > 1.0) inputSampleL = 1.0; if (inputSampleL < -1.0) inputSampleL = -1.0;
if (inputSampleR > 1.0) inputSampleR = 1.0; if (inputSampleR < -1.0) inputSampleR = -1.0;
iirSampleKL = (iirSampleKL * (1.0-iirAmount)) + (inputSampleL * iirAmount); inputSampleL = iirSampleKL;
iirSampleKR = (iirSampleKR * (1.0-iirAmount)) + (inputSampleR * iirAmount); inputSampleR = iirSampleKR;
inputSampleL *= gain; inputSampleR *= gain; gain = ((gain-1)*0.75)+1;
if (inputSampleL > 1.0) inputSampleL = 1.0; if (inputSampleL < -1.0) inputSampleL = -1.0;
if (inputSampleR > 1.0) inputSampleR = 1.0; if (inputSampleR < -1.0) inputSampleR = -1.0;
iirSampleLL = (iirSampleLL * (1.0-iirAmount)) + (inputSampleL * iirAmount); inputSampleL = iirSampleLL;
iirSampleLR = (iirSampleLR * (1.0-iirAmount)) + (inputSampleR * iirAmount); inputSampleR = iirSampleLR;
inputSampleL *= gain; inputSampleR *= gain; gain = ((gain-1)*0.75)+1;
if (inputSampleL > 1.0) inputSampleL = 1.0; if (inputSampleL < -1.0) inputSampleL = -1.0;
if (inputSampleR > 1.0) inputSampleR = 1.0; if (inputSampleR < -1.0) inputSampleR = -1.0;
iirSampleML = (iirSampleML * (1.0-iirAmount)) + (inputSampleL * iirAmount); inputSampleL = iirSampleML;
iirSampleMR = (iirSampleMR * (1.0-iirAmount)) + (inputSampleR * iirAmount); inputSampleR = iirSampleMR;
inputSampleL *= gain; inputSampleR *= gain; gain = ((gain-1)*0.75)+1;
if (inputSampleL > 1.0) inputSampleL = 1.0; if (inputSampleL < -1.0) inputSampleL = -1.0;
if (inputSampleR > 1.0) inputSampleR = 1.0; if (inputSampleR < -1.0) inputSampleR = -1.0;
iirSampleNL = (iirSampleNL * (1.0-iirAmount)) + (inputSampleL * iirAmount); inputSampleL = iirSampleNL;
iirSampleNR = (iirSampleNR * (1.0-iirAmount)) + (inputSampleR * iirAmount); inputSampleR = iirSampleNR;
inputSampleL *= gain; inputSampleR *= gain; gain = ((gain-1)*0.75)+1;
if (inputSampleL > 1.0) inputSampleL = 1.0; if (inputSampleL < -1.0) inputSampleL = -1.0;
if (inputSampleR > 1.0) inputSampleR = 1.0; if (inputSampleR < -1.0) inputSampleR = -1.0;
iirSampleOL = (iirSampleOL * (1.0-iirAmount)) + (inputSampleL * iirAmount); inputSampleL = iirSampleOL;
iirSampleOR = (iirSampleOR * (1.0-iirAmount)) + (inputSampleR * iirAmount); inputSampleR = iirSampleOR;
inputSampleL *= gain; inputSampleR *= gain; gain = ((gain-1)*0.75)+1;
if (inputSampleL > 1.0) inputSampleL = 1.0; if (inputSampleL < -1.0) inputSampleL = -1.0;
if (inputSampleR > 1.0) inputSampleR = 1.0; if (inputSampleR < -1.0) inputSampleR = -1.0;
iirSamplePL = (iirSamplePL * (1.0-iirAmount)) + (inputSampleL * iirAmount); inputSampleL = iirSamplePL;
iirSamplePR = (iirSamplePR * (1.0-iirAmount)) + (inputSampleR * iirAmount); inputSampleR = iirSamplePR;
inputSampleL *= gain; inputSampleR *= gain; gain = ((gain-1)*0.75)+1;
if (inputSampleL > 1.0) inputSampleL = 1.0; if (inputSampleL < -1.0) inputSampleL = -1.0;
if (inputSampleR > 1.0) inputSampleR = 1.0; if (inputSampleR < -1.0) inputSampleR = -1.0;
iirSampleQL = (iirSampleQL * (1.0-iirAmount)) + (inputSampleL * iirAmount); inputSampleL = iirSampleQL;
iirSampleQR = (iirSampleQR * (1.0-iirAmount)) + (inputSampleR * iirAmount); inputSampleR = iirSampleQR;
inputSampleL *= gain; inputSampleR *= gain; gain = ((gain-1)*0.75)+1;
if (inputSampleL > 1.0) inputSampleL = 1.0; if (inputSampleL < -1.0) inputSampleL = -1.0;
if (inputSampleR > 1.0) inputSampleR = 1.0; if (inputSampleR < -1.0) inputSampleR = -1.0;
iirSampleRL = (iirSampleRL * (1.0-iirAmount)) + (inputSampleL * iirAmount); inputSampleL = iirSampleRL;
iirSampleRR = (iirSampleRR * (1.0-iirAmount)) + (inputSampleR * iirAmount); inputSampleR = iirSampleRR;
inputSampleL *= gain; inputSampleR *= gain; gain = ((gain-1)*0.75)+1;
if (inputSampleL > 1.0) inputSampleL = 1.0; if (inputSampleL < -1.0) inputSampleL = -1.0;
if (inputSampleR > 1.0) inputSampleR = 1.0; if (inputSampleR < -1.0) inputSampleR = -1.0;
iirSampleSL = (iirSampleSL * (1.0-iirAmount)) + (inputSampleL * iirAmount); inputSampleL = iirSampleSL;
iirSampleSR = (iirSampleSR * (1.0-iirAmount)) + (inputSampleR * iirAmount); inputSampleR = iirSampleSR;
inputSampleL *= gain; inputSampleR *= gain; gain = ((gain-1)*0.75)+1;
if (inputSampleL > 1.0) inputSampleL = 1.0; if (inputSampleL < -1.0) inputSampleL = -1.0;
if (inputSampleR > 1.0) inputSampleR = 1.0; if (inputSampleR < -1.0) inputSampleR = -1.0;
iirSampleTL = (iirSampleTL * (1.0-iirAmount)) + (inputSampleL * iirAmount); inputSampleL = iirSampleTL;
iirSampleTR = (iirSampleTR * (1.0-iirAmount)) + (inputSampleR * iirAmount); inputSampleR = iirSampleTR;
inputSampleL *= gain; inputSampleR *= gain; gain = ((gain-1)*0.75)+1;
if (inputSampleL > 1.0) inputSampleL = 1.0; if (inputSampleL < -1.0) inputSampleL = -1.0;
if (inputSampleR > 1.0) inputSampleR = 1.0; if (inputSampleR < -1.0) inputSampleR = -1.0;
iirSampleUL = (iirSampleUL * (1.0-iirAmount)) + (inputSampleL * iirAmount); inputSampleL = iirSampleUL;
iirSampleUR = (iirSampleUR * (1.0-iirAmount)) + (inputSampleR * iirAmount); inputSampleR = iirSampleUR;
inputSampleL *= gain; inputSampleR *= gain; gain = ((gain-1)*0.75)+1;
if (inputSampleL > 1.0) inputSampleL = 1.0; if (inputSampleL < -1.0) inputSampleL = -1.0;
if (inputSampleR > 1.0) inputSampleR = 1.0; if (inputSampleR < -1.0) inputSampleR = -1.0;
iirSampleVL = (iirSampleVL * (1.0-iirAmount)) + (inputSampleL * iirAmount); inputSampleL = iirSampleVL;
iirSampleVR = (iirSampleVR * (1.0-iirAmount)) + (inputSampleR * iirAmount); inputSampleR = iirSampleVR;
inputSampleL *= gain; inputSampleR *= gain; gain = ((gain-1)*0.75)+1;
if (inputSampleL > 1.0) inputSampleL = 1.0; if (inputSampleL < -1.0) inputSampleL = -1.0;
if (inputSampleR > 1.0) inputSampleR = 1.0; if (inputSampleR < -1.0) inputSampleR = -1.0;
iirSampleWL = (iirSampleWL * (1.0-iirAmount)) + (inputSampleL * iirAmount); inputSampleL = iirSampleWL;
iirSampleWR = (iirSampleWR * (1.0-iirAmount)) + (inputSampleR * iirAmount); inputSampleR = iirSampleWR;
inputSampleL *= gain; inputSampleR *= gain; gain = ((gain-1)*0.75)+1;
if (inputSampleL > 1.0) inputSampleL = 1.0; if (inputSampleL < -1.0) inputSampleL = -1.0;
if (inputSampleR > 1.0) inputSampleR = 1.0; if (inputSampleR < -1.0) inputSampleR = -1.0;
iirSampleXL = (iirSampleXL * (1.0-iirAmount)) + (inputSampleL * iirAmount); inputSampleL = iirSampleXL;
iirSampleXR = (iirSampleXR * (1.0-iirAmount)) + (inputSampleR * iirAmount); inputSampleR = iirSampleXR;
inputSampleL *= gain; inputSampleR *= gain; gain = ((gain-1)*0.75)+1;
if (inputSampleL > 1.0) inputSampleL = 1.0; if (inputSampleL < -1.0) inputSampleL = -1.0;
if (inputSampleR > 1.0) inputSampleR = 1.0; if (inputSampleR < -1.0) inputSampleR = -1.0;
iirSampleYL = (iirSampleYL * (1.0-iirAmount)) + (inputSampleL * iirAmount); inputSampleL = iirSampleYL;
iirSampleYR = (iirSampleYR * (1.0-iirAmount)) + (inputSampleR * iirAmount); inputSampleR = iirSampleYR;
inputSampleL *= gain; inputSampleR *= gain; gain = ((gain-1)*0.75)+1;
if (inputSampleL > 1.0) inputSampleL = 1.0; if (inputSampleL < -1.0) inputSampleL = -1.0;
if (inputSampleR > 1.0) inputSampleR = 1.0; if (inputSampleR < -1.0) inputSampleR = -1.0;
iirSampleZL = (iirSampleZL * (1.0-iirAmount)) + (inputSampleL * iirAmount); inputSampleL = iirSampleZL;
iirSampleZR = (iirSampleZR * (1.0-iirAmount)) + (inputSampleR * iirAmount); inputSampleR = iirSampleZR;
if (inputSampleL > 1.0) inputSampleL = 1.0; if (inputSampleL < -1.0) inputSampleL = -1.0;
if (inputSampleR > 1.0) inputSampleR = 1.0; if (inputSampleR < -1.0) inputSampleR = -1.0;
//SubsOnly
break;
case 5:
case 6:
long double mid; mid = inputSampleL + inputSampleR;
long double side; side = inputSampleL - inputSampleR;
if (processing < 6) side = 0.0;
else mid = 0.0; //mono monitoring, or side-only monitoring
inputSampleL = (mid+side)/2.0;
inputSampleR = (mid-side)/2.0;
break;
case 7:
case 8:
case 9:
case 10:
case 11:
//Bandpass: changes in EQ are up in the variable defining, not here
//7 Vinyl, 8 9 10 Aurat, 11 Phone
if (processing == 9) {inputSampleR = (inputSampleL + inputSampleR)*0.5;inputSampleL = 0.0;}
if (processing == 10) {inputSampleL = (inputSampleL + inputSampleR)*0.5;inputSampleR = 0.0;}
if (processing == 11) {long double M; M = (inputSampleL + inputSampleR)*0.5; inputSampleL = M;inputSampleR = M;}
inputSampleL = sin(inputSampleL); inputSampleR = sin(inputSampleR);
//encode Console5: good cleanness
long double tempSampleL; tempSampleL = (inputSampleL * biquadL[2]) + biquadL[7];
biquadL[7] = (-tempSampleL * biquadL[5]) + biquadL[8];
biquadL[8] = (inputSampleL * biquadL[4]) - (tempSampleL * biquadL[6]);
inputSampleL = tempSampleL; //like mono AU, 7 and 8 store L channel
long double tempSampleR; tempSampleR = (inputSampleR * biquadR[2]) + biquadR[7];
biquadR[7] = (-tempSampleR * biquadR[5]) + biquadR[8];
biquadR[8] = (inputSampleR * biquadR[4]) - (tempSampleR * biquadR[6]);
inputSampleR = tempSampleR; // we are using the mono configuration
if (inputSampleL > 1.0) inputSampleL = 1.0; if (inputSampleL < -1.0) inputSampleL = -1.0;
if (inputSampleR > 1.0) inputSampleR = 1.0; if (inputSampleR < -1.0) inputSampleR = -1.0;
//without this, you can get a NaN condition where it spits out DC offset at full blast!
inputSampleL = asin(inputSampleL); inputSampleR = asin(inputSampleR);
//amplitude aspect
break;
case 12:
case 13:
case 14:
case 15:
if (processing == 12) {inputSampleL *= 0.855; inputSampleR *= 0.855;}
if (processing == 13) {inputSampleL *= 0.748; inputSampleR *= 0.748;}
if (processing == 14) {inputSampleL *= 0.713; inputSampleR *= 0.713;}
if (processing == 15) {inputSampleL *= 0.680; inputSampleR *= 0.680;}
//we do a volume compensation immediately to gain stage stuff cleanly
inputSampleL = sin(inputSampleL);
inputSampleR = sin(inputSampleR);
long double drySampleL; drySampleL = inputSampleL;
long double drySampleR; drySampleR = inputSampleR; //everything runs 'inside' Console
long double bass; bass = (processing * processing * 0.00001) / overallscale;
//we are using the iir filters from out of SubsOnly
mid = inputSampleL + inputSampleR; side = inputSampleL - inputSampleR;
iirSampleAL = (iirSampleAL * (1.0 - (bass*0.618))) + (side * bass * 0.618); side = side - iirSampleAL;
inputSampleL = (mid+side)/2.0; inputSampleR = (mid-side)/2.0;
//bass narrowing filter
allpasstemp = ax - 1; if (allpasstemp < 0 || allpasstemp > am) allpasstemp = am;
inputSampleL -= aL[allpasstemp]*0.5; aL[ax] = inputSampleL; inputSampleL *= 0.5;
inputSampleR -= aR[allpasstemp]*0.5; aR[ax] = inputSampleR; inputSampleR *= 0.5;
ax--; if (ax < 0 || ax > am) {ax = am;}
inputSampleL += (aL[ax])*0.5; inputSampleR += (aR[ax])*0.5;
if (ax == am) {inputSampleL += (aL[0])*0.5; inputSampleR += (aR[0])*0.5;}
else {inputSampleL += (aL[ax+1])*0.5; inputSampleR += (aR[ax+1])*0.5;}
//a darkened Midiverb-style allpass
if (processing == 12) {inputSampleL *= 0.125; inputSampleR *= 0.125;}
if (processing == 13) {inputSampleL *= 0.25; inputSampleR *= 0.25;}
if (processing == 14) {inputSampleL *= 0.30; inputSampleR *= 0.30;}
if (processing == 15) {inputSampleL *= 0.35; inputSampleR *= 0.35;}
//Cans A suppresses the crossfeed more, Cans B makes it louder
drySampleL += inputSampleR;
drySampleR += inputSampleL; //the crossfeed
allpasstemp = dx - 1; if (allpasstemp < 0 || allpasstemp > dm) allpasstemp = dm;
inputSampleL -= dL[allpasstemp]*0.5; dL[dx] = inputSampleL; inputSampleL *= 0.5;
inputSampleR -= dR[allpasstemp]*0.5; dR[dx] = inputSampleR; inputSampleR *= 0.5;
dx--; if (dx < 0 || dx > dm) {dx = dm;}
inputSampleL += (dL[dx])*0.5; inputSampleR += (dR[dx])*0.5;
if (dx == dm) {inputSampleL += (dL[0])*0.5; inputSampleR += (dR[0])*0.5;}
else {inputSampleL += (dL[dx+1])*0.5; inputSampleR += (dR[dx+1])*0.5;}
//a darkened Midiverb-style allpass, which is stretching the previous one even more
inputSampleL *= 0.25; inputSampleR *= 0.25;
//for all versions of Cans the second level of bloom is this far down
//and, remains on the opposite speaker rather than crossing again to the original side
drySampleL += inputSampleR;
drySampleR += inputSampleL; //add the crossfeed and very faint extra verbyness
inputSampleL = drySampleL;
inputSampleR = drySampleR; //and output our can-opened headphone feed
mid = inputSampleL + inputSampleR; side = inputSampleL - inputSampleR;
iirSampleAR = (iirSampleAR * (1.0 - bass)) + (side * bass); side = side - iirSampleAR;
inputSampleL = (mid+side)/2.0; inputSampleR = (mid-side)/2.0;
//bass narrowing filter
if (inputSampleL > 1.0) inputSampleL = 1.0; if (inputSampleL < -1.0) inputSampleL = -1.0; inputSampleL = asin(inputSampleL);
if (inputSampleR > 1.0) inputSampleR = 1.0; if (inputSampleR < -1.0) inputSampleR = -1.0; inputSampleR = asin(inputSampleR);
//ConsoleBuss processing
break;
case 16:
long double inputSample = (inputSampleL + inputSampleR) * 0.5;
inputSampleL = -inputSample;
inputSampleR = inputSample;
break;
}
//begin Not Just Another Dither
if (processing == 1) {
inputSampleL = inputSampleL * 32768.0; //or 16 bit option
inputSampleR = inputSampleR * 32768.0; //or 16 bit option
} else {
inputSampleL = inputSampleL * 8388608.0; //for literally everything else
inputSampleR = inputSampleR * 8388608.0; //we will apply the 24 bit NJAD
} //on the not unreasonable assumption that we are very likely playing back on 24 bit DAC
//if we're not, then all we did was apply a Benford Realness function at 24 bits down.
bool cutbinsL; cutbinsL = false;
bool cutbinsR; cutbinsR = false;
long double drySampleL; drySampleL = inputSampleL;
long double drySampleR; drySampleR = inputSampleR;
inputSampleL -= noiseShapingL;
inputSampleR -= noiseShapingR;
//NJAD L
long double benfordize; benfordize = floor(inputSampleL);
while (benfordize >= 1.0) benfordize /= 10;
while (benfordize < 1.0 && benfordize > 0.0000001) benfordize *= 10;
int hotbinA; hotbinA = floor(benfordize);
//hotbin becomes the Benford bin value for this number floored
long double totalA; totalA = 0;
if ((hotbinA > 0) && (hotbinA < 10))
{
bynL[hotbinA] += 1; if (bynL[hotbinA] > 982) cutbinsL = true;
totalA += (301-bynL[1]); totalA += (176-bynL[2]); totalA += (125-bynL[3]);
totalA += (97-bynL[4]); totalA += (79-bynL[5]); totalA += (67-bynL[6]);
totalA += (58-bynL[7]); totalA += (51-bynL[8]); totalA += (46-bynL[9]); bynL[hotbinA] -= 1;
} else hotbinA = 10;
//produce total number- smaller is closer to Benford real
benfordize = ceil(inputSampleL);
while (benfordize >= 1.0) benfordize /= 10;
while (benfordize < 1.0 && benfordize > 0.0000001) benfordize *= 10;
int hotbinB; hotbinB = floor(benfordize);
//hotbin becomes the Benford bin value for this number ceiled
long double totalB; totalB = 0;
if ((hotbinB > 0) && (hotbinB < 10))
{
bynL[hotbinB] += 1; if (bynL[hotbinB] > 982) cutbinsL = true;
totalB += (301-bynL[1]); totalB += (176-bynL[2]); totalB += (125-bynL[3]);
totalB += (97-bynL[4]); totalB += (79-bynL[5]); totalB += (67-bynL[6]);
totalB += (58-bynL[7]); totalB += (51-bynL[8]); totalB += (46-bynL[9]); bynL[hotbinB] -= 1;
} else hotbinB = 10;
//produce total number- smaller is closer to Benford real
long double outputSample;
if (totalA < totalB) {bynL[hotbinA] += 1; outputSample = floor(inputSampleL);}
else {bynL[hotbinB] += 1; outputSample = floor(inputSampleL+1);}
//assign the relevant one to the delay line
//and floor/ceil signal accordingly
if (cutbinsL) {
bynL[1] *= 0.99; bynL[2] *= 0.99; bynL[3] *= 0.99; bynL[4] *= 0.99; bynL[5] *= 0.99;
bynL[6] *= 0.99; bynL[7] *= 0.99; bynL[8] *= 0.99; bynL[9] *= 0.99; bynL[10] *= 0.99;
}
noiseShapingL += outputSample - drySampleL;
if (noiseShapingL > fabs(inputSampleL)) noiseShapingL = fabs(inputSampleL);
if (noiseShapingL < -fabs(inputSampleL)) noiseShapingL = -fabs(inputSampleL);
if (processing == 1) inputSampleL = outputSample / 32768.0;
else inputSampleL = outputSample / 8388608.0;
if (inputSampleL > 1.0) inputSampleL = 1.0;
if (inputSampleL < -1.0) inputSampleL = -1.0;
//finished NJAD L
//NJAD R
benfordize = floor(inputSampleR);
while (benfordize >= 1.0) benfordize /= 10;
while (benfordize < 1.0 && benfordize > 0.0000001) benfordize *= 10;
hotbinA = floor(benfordize);
//hotbin becomes the Benford bin value for this number floored
totalA = 0;
if ((hotbinA > 0) && (hotbinA < 10))
{
bynR[hotbinA] += 1; if (bynR[hotbinA] > 982) cutbinsR = true;
totalA += (301-bynR[1]); totalA += (176-bynR[2]); totalA += (125-bynR[3]);
totalA += (97-bynR[4]); totalA += (79-bynR[5]); totalA += (67-bynR[6]);
totalA += (58-bynR[7]); totalA += (51-bynR[8]); totalA += (46-bynR[9]); bynR[hotbinA] -= 1;
} else hotbinA = 10;
//produce total number- smaller is closer to Benford real
benfordize = ceil(inputSampleR);
while (benfordize >= 1.0) benfordize /= 10;
while (benfordize < 1.0 && benfordize > 0.0000001) benfordize *= 10;
hotbinB = floor(benfordize);
//hotbin becomes the Benford bin value for this number ceiled
totalB = 0;
if ((hotbinB > 0) && (hotbinB < 10))
{
bynR[hotbinB] += 1; if (bynR[hotbinB] > 982) cutbinsR = true;
totalB += (301-bynR[1]); totalB += (176-bynR[2]); totalB += (125-bynR[3]);
totalB += (97-bynR[4]); totalB += (79-bynR[5]); totalB += (67-bynR[6]);
totalB += (58-bynR[7]); totalB += (51-bynR[8]); totalB += (46-bynR[9]); bynR[hotbinB] -= 1;
} else hotbinB = 10;
//produce total number- smaller is closer to Benford real
if (totalA < totalB) {bynR[hotbinA] += 1; outputSample = floor(inputSampleR);}
else {bynR[hotbinB] += 1; outputSample = floor(inputSampleR+1);}
//assign the relevant one to the delay line
//and floor/ceil signal accordingly
if (cutbinsR) {
bynR[1] *= 0.99; bynR[2] *= 0.99; bynR[3] *= 0.99; bynR[4] *= 0.99; bynR[5] *= 0.99;
bynR[6] *= 0.99; bynR[7] *= 0.99; bynR[8] *= 0.99; bynR[9] *= 0.99; bynR[10] *= 0.99;
}
noiseShapingR += outputSample - drySampleR;
if (noiseShapingR > fabs(inputSampleR)) noiseShapingR = fabs(inputSampleR);
if (noiseShapingR < -fabs(inputSampleR)) noiseShapingR = -fabs(inputSampleR);
if (processing == 1) inputSampleR = outputSample / 32768.0;
else inputSampleR = outputSample / 8388608.0;
if (inputSampleR > 1.0) inputSampleR = 1.0;
if (inputSampleR < -1.0) inputSampleR = -1.0;
//finished NJAD R
//does not use 32 bit stereo floating point dither
*out1 = inputSampleL;
*out2 = inputSampleR;
*in1++;
*in2++;
*out1++;
*out2++;
}
}
void Monitoring::processDoubleReplacing(double **inputs, double **outputs, VstInt32 sampleFrames)
{
double* in1 = inputs[0];
double* in2 = inputs[1];
double* out1 = outputs[0];
double* out2 = outputs[1];
double overallscale = 1.0;
overallscale /= 44100.0;
overallscale *= getSampleRate();
int processing = (VstInt32)( A * 16.999 );
int am = (int)149.0 * overallscale;
int bm = (int)179.0 * overallscale;
int cm = (int)191.0 * overallscale;
int dm = (int)223.0 * overallscale; //these are 'good' primes, spacing out the allpasses
int allpasstemp;
//for PeaksOnly
biquadL[0] = 0.0375/overallscale; biquadL[1] = 0.1575; //define as AURAT, MONORAT, MONOLAT unless overridden
if (processing == 7) {biquadL[0] = 0.0385/overallscale; biquadL[1] = 0.0825;}
if (processing == 11) {biquadL[0] = 0.1245/overallscale; biquadL[1] = 0.46;}
double K = tan(M_PI * biquadL[0]);
double norm = 1.0 / (1.0 + K / biquadL[1] + K * K);
biquadL[2] = K / biquadL[1] * norm;
biquadL[4] = -biquadL[2]; //for bandpass, ignore [3] = 0.0
biquadL[5] = 2.0 * (K * K - 1.0) * norm;
biquadL[6] = (1.0 - K / biquadL[1] + K * K) * norm;
//for Bandpasses
biquadR[0] = 0.0375/overallscale; biquadR[1] = 0.1575; //define as AURAT, MONORAT, MONOLAT unless overridden
if (processing == 7) {biquadR[0] = 0.0385/overallscale; biquadR[1] = 0.0825;}
if (processing == 11) {biquadR[0] = 0.1245/overallscale; biquadR[1] = 0.46;}
K = tan(M_PI * biquadR[0]);
norm = 1.0 / (1.0 + K / biquadR[1] + K * K);
biquadR[2] = K / biquadR[1] * norm;
biquadR[4] = -biquadR[2]; //for bandpass, ignore [3] = 0.0
biquadR[5] = 2.0 * (K * K - 1.0) * norm;
biquadR[6] = (1.0 - K / biquadR[1] + K * K) * norm;
//for Bandpasses
while (--sampleFrames >= 0)
{
long double inputSampleL = *in1;
long double inputSampleR = *in2;
if (fabs(inputSampleL)<1.18e-43) inputSampleL = fpd * 1.18e-43;
if (fabs(inputSampleR)<1.18e-43) inputSampleR = fpd * 1.18e-43;
switch (processing)
{
case 0:
case 1:
break;
case 2:
if (inputSampleL > 1.0) inputSampleL = 1.0; if (inputSampleL < -1.0) inputSampleL = -1.0; inputSampleL = asin(inputSampleL);
if (inputSampleR > 1.0) inputSampleR = 1.0; if (inputSampleR < -1.0) inputSampleR = -1.0; inputSampleR = asin(inputSampleR);
//amplitude aspect
allpasstemp = ax - 1; if (allpasstemp < 0 || allpasstemp > am) allpasstemp = am;
inputSampleL -= aL[allpasstemp]*0.5; aL[ax] = inputSampleL; inputSampleL *= 0.5;
inputSampleR -= aR[allpasstemp]*0.5; aR[ax] = inputSampleR; inputSampleR *= 0.5;
ax--; if (ax < 0 || ax > am) {ax = am;}
inputSampleL += (aL[ax]);
inputSampleR += (aR[ax]);
//a single Midiverb-style allpass
if (inputSampleL > 1.0) inputSampleL = 1.0; if (inputSampleL < -1.0) inputSampleL = -1.0; inputSampleL = asin(inputSampleL);
if (inputSampleR > 1.0) inputSampleR = 1.0; if (inputSampleR < -1.0) inputSampleR = -1.0; inputSampleR = asin(inputSampleR);
//amplitude aspect
allpasstemp = bx - 1; if (allpasstemp < 0 || allpasstemp > bm) allpasstemp = bm;
inputSampleL -= bL[allpasstemp]*0.5; bL[bx] = inputSampleL; inputSampleL *= 0.5;
inputSampleR -= bR[allpasstemp]*0.5; bR[bx] = inputSampleR; inputSampleR *= 0.5;
bx--; if (bx < 0 || bx > bm) {bx = bm;}
inputSampleL += (bL[bx]);
inputSampleR += (bR[bx]);
//a single Midiverb-style allpass
if (inputSampleL > 1.0) inputSampleL = 1.0; if (inputSampleL < -1.0) inputSampleL = -1.0; inputSampleL = asin(inputSampleL);
if (inputSampleR > 1.0) inputSampleR = 1.0; if (inputSampleR < -1.0) inputSampleR = -1.0; inputSampleR = asin(inputSampleR);
//amplitude aspect
allpasstemp = cx - 1; if (allpasstemp < 0 || allpasstemp > cm) allpasstemp = cm;
inputSampleL -= cL[allpasstemp]*0.5; cL[cx] = inputSampleL; inputSampleL *= 0.5;
inputSampleR -= cR[allpasstemp]*0.5; cR[cx] = inputSampleR; inputSampleR *= 0.5;
cx--; if (cx < 0 || cx > cm) {cx = cm;}
inputSampleL += (cL[cx]);
inputSampleR += (cR[cx]);
//a single Midiverb-style allpass
if (inputSampleL > 1.0) inputSampleL = 1.0; if (inputSampleL < -1.0) inputSampleL = -1.0; inputSampleL = asin(inputSampleL);
if (inputSampleR > 1.0) inputSampleR = 1.0; if (inputSampleR < -1.0) inputSampleR = -1.0; inputSampleR = asin(inputSampleR);
//amplitude aspect
allpasstemp = dx - 1; if (allpasstemp < 0 || allpasstemp > dm) allpasstemp = dm;
inputSampleL -= dL[allpasstemp]*0.5; dL[dx] = inputSampleL; inputSampleL *= 0.5;
inputSampleR -= dR[allpasstemp]*0.5; dR[dx] = inputSampleR; inputSampleR *= 0.5;
dx--; if (dx < 0 || dx > dm) {dx = dm;}
inputSampleL += (dL[dx]);
inputSampleR += (dR[dx]);
//a single Midiverb-style allpass
if (inputSampleL > 1.0) inputSampleL = 1.0; if (inputSampleL < -1.0) inputSampleL = -1.0; inputSampleL = asin(inputSampleL);
if (inputSampleR > 1.0) inputSampleR = 1.0; if (inputSampleR < -1.0) inputSampleR = -1.0; inputSampleR = asin(inputSampleR);
//amplitude aspect
inputSampleL *= 0.63679; inputSampleR *= 0.63679; //scale it to 0dB output at full blast
//PeaksOnly
break;
case 3:
double trim;
trim = 2.302585092994045684017991; //natural logarithm of 10
long double slewSample; slewSample = (inputSampleL - lastSampleL)*trim;
lastSampleL = inputSampleL;
if (slewSample > 1.0) slewSample = 1.0; if (slewSample < -1.0) slewSample = -1.0;
inputSampleL = slewSample;
slewSample = (inputSampleR - lastSampleR)*trim;
lastSampleR = inputSampleR;
if (slewSample > 1.0) slewSample = 1.0; if (slewSample < -1.0) slewSample = -1.0;
inputSampleR = slewSample;
//SlewOnly
break;
case 4:
double iirAmount; iirAmount = (2250/44100.0) / overallscale;
double gain; gain = 1.42;
inputSampleL *= gain; inputSampleR *= gain; gain = ((gain-1)*0.75)+1;
iirSampleAL = (iirSampleAL * (1.0-iirAmount)) + (inputSampleL * iirAmount); inputSampleL = iirSampleAL;
iirSampleAR = (iirSampleAR * (1.0-iirAmount)) + (inputSampleR * iirAmount); inputSampleR = iirSampleAR;
inputSampleL *= gain; inputSampleR *= gain; gain = ((gain-1)*0.75)+1;
if (inputSampleL > 1.0) inputSampleL = 1.0; if (inputSampleL < -1.0) inputSampleL = -1.0;
if (inputSampleR > 1.0) inputSampleR = 1.0; if (inputSampleR < -1.0) inputSampleR = -1.0;
iirSampleBL = (iirSampleBL * (1.0-iirAmount)) + (inputSampleL * iirAmount); inputSampleL = iirSampleBL;
iirSampleBR = (iirSampleBR * (1.0-iirAmount)) + (inputSampleR * iirAmount); inputSampleR = iirSampleBR;
inputSampleL *= gain; inputSampleR *= gain; gain = ((gain-1)*0.75)+1;
if (inputSampleL > 1.0) inputSampleL = 1.0; if (inputSampleL < -1.0) inputSampleL = -1.0;
if (inputSampleR > 1.0) inputSampleR = 1.0; if (inputSampleR < -1.0) inputSampleR = -1.0;
iirSampleCL = (iirSampleCL * (1.0-iirAmount)) + (inputSampleL * iirAmount); inputSampleL = iirSampleCL;
iirSampleCR = (iirSampleCR * (1.0-iirAmount)) + (inputSampleR * iirAmount); inputSampleR = iirSampleCR;
inputSampleL *= gain; inputSampleR *= gain; gain = ((gain-1)*0.75)+1;
if (inputSampleL > 1.0) inputSampleL = 1.0; if (inputSampleL < -1.0) inputSampleL = -1.0;
if (inputSampleR > 1.0) inputSampleR = 1.0; if (inputSampleR < -1.0) inputSampleR = -1.0;
iirSampleDL = (iirSampleDL * (1.0-iirAmount)) + (inputSampleL * iirAmount); inputSampleL = iirSampleDL;
iirSampleDR = (iirSampleDR * (1.0-iirAmount)) + (inputSampleR * iirAmount); inputSampleR = iirSampleDR;
inputSampleL *= gain; inputSampleR *= gain; gain = ((gain-1)*0.75)+1;
if (inputSampleL > 1.0) inputSampleL = 1.0; if (inputSampleL < -1.0) inputSampleL = -1.0;
if (inputSampleR > 1.0) inputSampleR = 1.0; if (inputSampleR < -1.0) inputSampleR = -1.0;
iirSampleEL = (iirSampleEL * (1.0-iirAmount)) + (inputSampleL * iirAmount); inputSampleL = iirSampleEL;
iirSampleER = (iirSampleER * (1.0-iirAmount)) + (inputSampleR * iirAmount); inputSampleR = iirSampleER;
inputSampleL *= gain; inputSampleR *= gain; gain = ((gain-1)*0.75)+1;
if (inputSampleL > 1.0) inputSampleL = 1.0; if (inputSampleL < -1.0) inputSampleL = -1.0;
if (inputSampleR > 1.0) inputSampleR = 1.0; if (inputSampleR < -1.0) inputSampleR = -1.0;
iirSampleFL = (iirSampleFL * (1.0-iirAmount)) + (inputSampleL * iirAmount); inputSampleL = iirSampleFL;
iirSampleFR = (iirSampleFR * (1.0-iirAmount)) + (inputSampleR * iirAmount); inputSampleR = iirSampleFR;
inputSampleL *= gain; inputSampleR *= gain; gain = ((gain-1)*0.75)+1;
if (inputSampleL > 1.0) inputSampleL = 1.0; if (inputSampleL < -1.0) inputSampleL = -1.0;
if (inputSampleR > 1.0) inputSampleR = 1.0; if (inputSampleR < -1.0) inputSampleR = -1.0;
iirSampleGL = (iirSampleGL * (1.0-iirAmount)) + (inputSampleL * iirAmount); inputSampleL = iirSampleGL;
iirSampleGR = (iirSampleGR * (1.0-iirAmount)) + (inputSampleR * iirAmount); inputSampleR = iirSampleGR;
inputSampleL *= gain; inputSampleR *= gain; gain = ((gain-1)*0.75)+1;
if (inputSampleL > 1.0) inputSampleL = 1.0; if (inputSampleL < -1.0) inputSampleL = -1.0;
if (inputSampleR > 1.0) inputSampleR = 1.0; if (inputSampleR < -1.0) inputSampleR = -1.0;
iirSampleHL = (iirSampleHL * (1.0-iirAmount)) + (inputSampleL * iirAmount); inputSampleL = iirSampleHL;
iirSampleHR = (iirSampleHR * (1.0-iirAmount)) + (inputSampleR * iirAmount); inputSampleR = iirSampleHR;
inputSampleL *= gain; inputSampleR *= gain; gain = ((gain-1)*0.75)+1;
if (inputSampleL > 1.0) inputSampleL = 1.0; if (inputSampleL < -1.0) inputSampleL = -1.0;
if (inputSampleR > 1.0) inputSampleR = 1.0; if (inputSampleR < -1.0) inputSampleR = -1.0;
iirSampleIL = (iirSampleIL * (1.0-iirAmount)) + (inputSampleL * iirAmount); inputSampleL = iirSampleIL;
iirSampleIR = (iirSampleIR * (1.0-iirAmount)) + (inputSampleR * iirAmount); inputSampleR = iirSampleIR;
inputSampleL *= gain; inputSampleR *= gain; gain = ((gain-1)*0.75)+1;
if (inputSampleL > 1.0) inputSampleL = 1.0; if (inputSampleL < -1.0) inputSampleL = -1.0;
if (inputSampleR > 1.0) inputSampleR = 1.0; if (inputSampleR < -1.0) inputSampleR = -1.0;
iirSampleJL = (iirSampleJL * (1.0-iirAmount)) + (inputSampleL * iirAmount); inputSampleL = iirSampleJL;
iirSampleJR = (iirSampleJR * (1.0-iirAmount)) + (inputSampleR * iirAmount); inputSampleR = iirSampleJR;
inputSampleL *= gain; inputSampleR *= gain; gain = ((gain-1)*0.75)+1;
if (inputSampleL > 1.0) inputSampleL = 1.0; if (inputSampleL < -1.0) inputSampleL = -1.0;
if (inputSampleR > 1.0) inputSampleR = 1.0; if (inputSampleR < -1.0) inputSampleR = -1.0;
iirSampleKL = (iirSampleKL * (1.0-iirAmount)) + (inputSampleL * iirAmount); inputSampleL = iirSampleKL;
iirSampleKR = (iirSampleKR * (1.0-iirAmount)) + (inputSampleR * iirAmount); inputSampleR = iirSampleKR;
inputSampleL *= gain; inputSampleR *= gain; gain = ((gain-1)*0.75)+1;
if (inputSampleL > 1.0) inputSampleL = 1.0; if (inputSampleL < -1.0) inputSampleL = -1.0;
if (inputSampleR > 1.0) inputSampleR = 1.0; if (inputSampleR < -1.0) inputSampleR = -1.0;
iirSampleLL = (iirSampleLL * (1.0-iirAmount)) + (inputSampleL * iirAmount); inputSampleL = iirSampleLL;
iirSampleLR = (iirSampleLR * (1.0-iirAmount)) + (inputSampleR * iirAmount); inputSampleR = iirSampleLR;
inputSampleL *= gain; inputSampleR *= gain; gain = ((gain-1)*0.75)+1;
if (inputSampleL > 1.0) inputSampleL = 1.0; if (inputSampleL < -1.0) inputSampleL = -1.0;
if (inputSampleR > 1.0) inputSampleR = 1.0; if (inputSampleR < -1.0) inputSampleR = -1.0;
iirSampleML = (iirSampleML * (1.0-iirAmount)) + (inputSampleL * iirAmount); inputSampleL = iirSampleML;
iirSampleMR = (iirSampleMR * (1.0-iirAmount)) + (inputSampleR * iirAmount); inputSampleR = iirSampleMR;
inputSampleL *= gain; inputSampleR *= gain; gain = ((gain-1)*0.75)+1;
if (inputSampleL > 1.0) inputSampleL = 1.0; if (inputSampleL < -1.0) inputSampleL = -1.0;
if (inputSampleR > 1.0) inputSampleR = 1.0; if (inputSampleR < -1.0) inputSampleR = -1.0;
iirSampleNL = (iirSampleNL * (1.0-iirAmount)) + (inputSampleL * iirAmount); inputSampleL = iirSampleNL;
iirSampleNR = (iirSampleNR * (1.0-iirAmount)) + (inputSampleR * iirAmount); inputSampleR = iirSampleNR;
inputSampleL *= gain; inputSampleR *= gain; gain = ((gain-1)*0.75)+1;
if (inputSampleL > 1.0) inputSampleL = 1.0; if (inputSampleL < -1.0) inputSampleL = -1.0;
if (inputSampleR > 1.0) inputSampleR = 1.0; if (inputSampleR < -1.0) inputSampleR = -1.0;
iirSampleOL = (iirSampleOL * (1.0-iirAmount)) + (inputSampleL * iirAmount); inputSampleL = iirSampleOL;
iirSampleOR = (iirSampleOR * (1.0-iirAmount)) + (inputSampleR * iirAmount); inputSampleR = iirSampleOR;
inputSampleL *= gain; inputSampleR *= gain; gain = ((gain-1)*0.75)+1;
if (inputSampleL > 1.0) inputSampleL = 1.0; if (inputSampleL < -1.0) inputSampleL = -1.0;
if (inputSampleR > 1.0) inputSampleR = 1.0; if (inputSampleR < -1.0) inputSampleR = -1.0;
iirSamplePL = (iirSamplePL * (1.0-iirAmount)) + (inputSampleL * iirAmount); inputSampleL = iirSamplePL;
iirSamplePR = (iirSamplePR * (1.0-iirAmount)) + (inputSampleR * iirAmount); inputSampleR = iirSamplePR;
inputSampleL *= gain; inputSampleR *= gain; gain = ((gain-1)*0.75)+1;
if (inputSampleL > 1.0) inputSampleL = 1.0; if (inputSampleL < -1.0) inputSampleL = -1.0;
if (inputSampleR > 1.0) inputSampleR = 1.0; if (inputSampleR < -1.0) inputSampleR = -1.0;
iirSampleQL = (iirSampleQL * (1.0-iirAmount)) + (inputSampleL * iirAmount); inputSampleL = iirSampleQL;
iirSampleQR = (iirSampleQR * (1.0-iirAmount)) + (inputSampleR * iirAmount); inputSampleR = iirSampleQR;
inputSampleL *= gain; inputSampleR *= gain; gain = ((gain-1)*0.75)+1;
if (inputSampleL > 1.0) inputSampleL = 1.0; if (inputSampleL < -1.0) inputSampleL = -1.0;
if (inputSampleR > 1.0) inputSampleR = 1.0; if (inputSampleR < -1.0) inputSampleR = -1.0;
iirSampleRL = (iirSampleRL * (1.0-iirAmount)) + (inputSampleL * iirAmount); inputSampleL = iirSampleRL;
iirSampleRR = (iirSampleRR * (1.0-iirAmount)) + (inputSampleR * iirAmount); inputSampleR = iirSampleRR;
inputSampleL *= gain; inputSampleR *= gain; gain = ((gain-1)*0.75)+1;
if (inputSampleL > 1.0) inputSampleL = 1.0; if (inputSampleL < -1.0) inputSampleL = -1.0;
if (inputSampleR > 1.0) inputSampleR = 1.0; if (inputSampleR < -1.0) inputSampleR = -1.0;
iirSampleSL = (iirSampleSL * (1.0-iirAmount)) + (inputSampleL * iirAmount); inputSampleL = iirSampleSL;
iirSampleSR = (iirSampleSR * (1.0-iirAmount)) + (inputSampleR * iirAmount); inputSampleR = iirSampleSR;
inputSampleL *= gain; inputSampleR *= gain; gain = ((gain-1)*0.75)+1;
if (inputSampleL > 1.0) inputSampleL = 1.0; if (inputSampleL < -1.0) inputSampleL = -1.0;
if (inputSampleR > 1.0) inputSampleR = 1.0; if (inputSampleR < -1.0) inputSampleR = -1.0;
iirSampleTL = (iirSampleTL * (1.0-iirAmount)) + (inputSampleL * iirAmount); inputSampleL = iirSampleTL;
iirSampleTR = (iirSampleTR * (1.0-iirAmount)) + (inputSampleR * iirAmount); inputSampleR = iirSampleTR;
inputSampleL *= gain; inputSampleR *= gain; gain = ((gain-1)*0.75)+1;
if (inputSampleL > 1.0) inputSampleL = 1.0; if (inputSampleL < -1.0) inputSampleL = -1.0;
if (inputSampleR > 1.0) inputSampleR = 1.0; if (inputSampleR < -1.0) inputSampleR = -1.0;
iirSampleUL = (iirSampleUL * (1.0-iirAmount)) + (inputSampleL * iirAmount); inputSampleL = iirSampleUL;
iirSampleUR = (iirSampleUR * (1.0-iirAmount)) + (inputSampleR * iirAmount); inputSampleR = iirSampleUR;
inputSampleL *= gain; inputSampleR *= gain; gain = ((gain-1)*0.75)+1;
if (inputSampleL > 1.0) inputSampleL = 1.0; if (inputSampleL < -1.0) inputSampleL = -1.0;
if (inputSampleR > 1.0) inputSampleR = 1.0; if (inputSampleR < -1.0) inputSampleR = -1.0;
iirSampleVL = (iirSampleVL * (1.0-iirAmount)) + (inputSampleL * iirAmount); inputSampleL = iirSampleVL;
iirSampleVR = (iirSampleVR * (1.0-iirAmount)) + (inputSampleR * iirAmount); inputSampleR = iirSampleVR;
inputSampleL *= gain; inputSampleR *= gain; gain = ((gain-1)*0.75)+1;
if (inputSampleL > 1.0) inputSampleL = 1.0; if (inputSampleL < -1.0) inputSampleL = -1.0;
if (inputSampleR > 1.0) inputSampleR = 1.0; if (inputSampleR < -1.0) inputSampleR = -1.0;
iirSampleWL = (iirSampleWL * (1.0-iirAmount)) + (inputSampleL * iirAmount); inputSampleL = iirSampleWL;
iirSampleWR = (iirSampleWR * (1.0-iirAmount)) + (inputSampleR * iirAmount); inputSampleR = iirSampleWR;
inputSampleL *= gain; inputSampleR *= gain; gain = ((gain-1)*0.75)+1;
if (inputSampleL > 1.0) inputSampleL = 1.0; if (inputSampleL < -1.0) inputSampleL = -1.0;
if (inputSampleR > 1.0) inputSampleR = 1.0; if (inputSampleR < -1.0) inputSampleR = -1.0;
iirSampleXL = (iirSampleXL * (1.0-iirAmount)) + (inputSampleL * iirAmount); inputSampleL = iirSampleXL;
iirSampleXR = (iirSampleXR * (1.0-iirAmount)) + (inputSampleR * iirAmount); inputSampleR = iirSampleXR;
inputSampleL *= gain; inputSampleR *= gain; gain = ((gain-1)*0.75)+1;
if (inputSampleL > 1.0) inputSampleL = 1.0; if (inputSampleL < -1.0) inputSampleL = -1.0;
if (inputSampleR > 1.0) inputSampleR = 1.0; if (inputSampleR < -1.0) inputSampleR = -1.0;
iirSampleYL = (iirSampleYL * (1.0-iirAmount)) + (inputSampleL * iirAmount); inputSampleL = iirSampleYL;
iirSampleYR = (iirSampleYR * (1.0-iirAmount)) + (inputSampleR * iirAmount); inputSampleR = iirSampleYR;
inputSampleL *= gain; inputSampleR *= gain; gain = ((gain-1)*0.75)+1;
if (inputSampleL > 1.0) inputSampleL = 1.0; if (inputSampleL < -1.0) inputSampleL = -1.0;
if (inputSampleR > 1.0) inputSampleR = 1.0; if (inputSampleR < -1.0) inputSampleR = -1.0;
iirSampleZL = (iirSampleZL * (1.0-iirAmount)) + (inputSampleL * iirAmount); inputSampleL = iirSampleZL;
iirSampleZR = (iirSampleZR * (1.0-iirAmount)) + (inputSampleR * iirAmount); inputSampleR = iirSampleZR;
if (inputSampleL > 1.0) inputSampleL = 1.0; if (inputSampleL < -1.0) inputSampleL = -1.0;
if (inputSampleR > 1.0) inputSampleR = 1.0; if (inputSampleR < -1.0) inputSampleR = -1.0;
//SubsOnly
break;
case 5:
case 6:
long double mid; mid = inputSampleL + inputSampleR;
long double side; side = inputSampleL - inputSampleR;
if (processing < 6) side = 0.0;
else mid = 0.0; //mono monitoring, or side-only monitoring
inputSampleL = (mid+side)/2.0;
inputSampleR = (mid-side)/2.0;
break;
case 7:
case 8:
case 9:
case 10:
case 11:
//Bandpass: changes in EQ are up in the variable defining, not here
//7 Vinyl, 8 9 10 Aurat, 11 Phone
if (processing == 9) {inputSampleR = (inputSampleL + inputSampleR)*0.5;inputSampleL = 0.0;}
if (processing == 10) {inputSampleL = (inputSampleL + inputSampleR)*0.5;inputSampleR = 0.0;}
if (processing == 11) {long double M; M = (inputSampleL + inputSampleR)*0.5; inputSampleL = M;inputSampleR = M;}
inputSampleL = sin(inputSampleL); inputSampleR = sin(inputSampleR);
//encode Console5: good cleanness
long double tempSampleL; tempSampleL = (inputSampleL * biquadL[2]) + biquadL[7];
biquadL[7] = (-tempSampleL * biquadL[5]) + biquadL[8];
biquadL[8] = (inputSampleL * biquadL[4]) - (tempSampleL * biquadL[6]);
inputSampleL = tempSampleL; //like mono AU, 7 and 8 store L channel
long double tempSampleR; tempSampleR = (inputSampleR * biquadR[2]) + biquadR[7];
biquadR[7] = (-tempSampleR * biquadR[5]) + biquadR[8];
biquadR[8] = (inputSampleR * biquadR[4]) - (tempSampleR * biquadR[6]);
inputSampleR = tempSampleR; // we are using the mono configuration
if (inputSampleL > 1.0) inputSampleL = 1.0; if (inputSampleL < -1.0) inputSampleL = -1.0;
if (inputSampleR > 1.0) inputSampleR = 1.0; if (inputSampleR < -1.0) inputSampleR = -1.0;
//without this, you can get a NaN condition where it spits out DC offset at full blast!
inputSampleL = asin(inputSampleL); inputSampleR = asin(inputSampleR);
//amplitude aspect
break;
case 12:
case 13:
case 14:
case 15:
if (processing == 12) {inputSampleL *= 0.855; inputSampleR *= 0.855;}
if (processing == 13) {inputSampleL *= 0.748; inputSampleR *= 0.748;}
if (processing == 14) {inputSampleL *= 0.713; inputSampleR *= 0.713;}
if (processing == 15) {inputSampleL *= 0.680; inputSampleR *= 0.680;}
//we do a volume compensation immediately to gain stage stuff cleanly
inputSampleL = sin(inputSampleL);
inputSampleR = sin(inputSampleR);
long double drySampleL; drySampleL = inputSampleL;
long double drySampleR; drySampleR = inputSampleR; //everything runs 'inside' Console
long double bass; bass = (processing * processing * 0.00001) / overallscale;
//we are using the iir filters from out of SubsOnly
mid = inputSampleL + inputSampleR; side = inputSampleL - inputSampleR;
iirSampleAL = (iirSampleAL * (1.0 - (bass*0.618))) + (side * bass * 0.618); side = side - iirSampleAL;
inputSampleL = (mid+side)/2.0; inputSampleR = (mid-side)/2.0;
//bass narrowing filter
allpasstemp = ax - 1; if (allpasstemp < 0 || allpasstemp > am) allpasstemp = am;
inputSampleL -= aL[allpasstemp]*0.5; aL[ax] = inputSampleL; inputSampleL *= 0.5;
inputSampleR -= aR[allpasstemp]*0.5; aR[ax] = inputSampleR; inputSampleR *= 0.5;
ax--; if (ax < 0 || ax > am) {ax = am;}
inputSampleL += (aL[ax])*0.5; inputSampleR += (aR[ax])*0.5;
if (ax == am) {inputSampleL += (aL[0])*0.5; inputSampleR += (aR[0])*0.5;}
else {inputSampleL += (aL[ax+1])*0.5; inputSampleR += (aR[ax+1])*0.5;}
//a darkened Midiverb-style allpass
if (processing == 12) {inputSampleL *= 0.125; inputSampleR *= 0.125;}
if (processing == 13) {inputSampleL *= 0.25; inputSampleR *= 0.25;}
if (processing == 14) {inputSampleL *= 0.30; inputSampleR *= 0.30;}
if (processing == 15) {inputSampleL *= 0.35; inputSampleR *= 0.35;}
//Cans A suppresses the crossfeed more, Cans B makes it louder
drySampleL += inputSampleR;
drySampleR += inputSampleL; //the crossfeed
allpasstemp = dx - 1; if (allpasstemp < 0 || allpasstemp > dm) allpasstemp = dm;
inputSampleL -= dL[allpasstemp]*0.5; dL[dx] = inputSampleL; inputSampleL *= 0.5;
inputSampleR -= dR[allpasstemp]*0.5; dR[dx] = inputSampleR; inputSampleR *= 0.5;
dx--; if (dx < 0 || dx > dm) {dx = dm;}
inputSampleL += (dL[dx])*0.5; inputSampleR += (dR[dx])*0.5;
if (dx == dm) {inputSampleL += (dL[0])*0.5; inputSampleR += (dR[0])*0.5;}
else {inputSampleL += (dL[dx+1])*0.5; inputSampleR += (dR[dx+1])*0.5;}
//a darkened Midiverb-style allpass, which is stretching the previous one even more
inputSampleL *= 0.25; inputSampleR *= 0.25;
//for all versions of Cans the second level of bloom is this far down
//and, remains on the opposite speaker rather than crossing again to the original side
drySampleL += inputSampleR;
drySampleR += inputSampleL; //add the crossfeed and very faint extra verbyness
inputSampleL = drySampleL;
inputSampleR = drySampleR; //and output our can-opened headphone feed
mid = inputSampleL + inputSampleR; side = inputSampleL - inputSampleR;
iirSampleAR = (iirSampleAR * (1.0 - bass)) + (side * bass); side = side - iirSampleAR;
inputSampleL = (mid+side)/2.0; inputSampleR = (mid-side)/2.0;
//bass narrowing filter
if (inputSampleL > 1.0) inputSampleL = 1.0; if (inputSampleL < -1.0) inputSampleL = -1.0; inputSampleL = asin(inputSampleL);
if (inputSampleR > 1.0) inputSampleR = 1.0; if (inputSampleR < -1.0) inputSampleR = -1.0; inputSampleR = asin(inputSampleR);
//ConsoleBuss processing
break;
case 16:
long double inputSample = (inputSampleL + inputSampleR) * 0.5;
inputSampleL = -inputSample;
inputSampleR = inputSample;
break;
}
//begin Not Just Another Dither
if (processing == 1) {
inputSampleL = inputSampleL * 32768.0; //or 16 bit option
inputSampleR = inputSampleR * 32768.0; //or 16 bit option
} else {
inputSampleL = inputSampleL * 8388608.0; //for literally everything else
inputSampleR = inputSampleR * 8388608.0; //we will apply the 24 bit NJAD
} //on the not unreasonable assumption that we are very likely playing back on 24 bit DAC
//if we're not, then all we did was apply a Benford Realness function at 24 bits down.
bool cutbinsL; cutbinsL = false;
bool cutbinsR; cutbinsR = false;
long double drySampleL; drySampleL = inputSampleL;
long double drySampleR; drySampleR = inputSampleR;
inputSampleL -= noiseShapingL;
inputSampleR -= noiseShapingR;
//NJAD L
long double benfordize; benfordize = floor(inputSampleL);
while (benfordize >= 1.0) benfordize /= 10;
while (benfordize < 1.0 && benfordize > 0.0000001) benfordize *= 10;
int hotbinA; hotbinA = floor(benfordize);
//hotbin becomes the Benford bin value for this number floored
long double totalA; totalA = 0;
if ((hotbinA > 0) && (hotbinA < 10))
{
bynL[hotbinA] += 1; if (bynL[hotbinA] > 982) cutbinsL = true;
totalA += (301-bynL[1]); totalA += (176-bynL[2]); totalA += (125-bynL[3]);
totalA += (97-bynL[4]); totalA += (79-bynL[5]); totalA += (67-bynL[6]);
totalA += (58-bynL[7]); totalA += (51-bynL[8]); totalA += (46-bynL[9]); bynL[hotbinA] -= 1;
} else hotbinA = 10;
//produce total number- smaller is closer to Benford real
benfordize = ceil(inputSampleL);
while (benfordize >= 1.0) benfordize /= 10;
while (benfordize < 1.0 && benfordize > 0.0000001) benfordize *= 10;
int hotbinB; hotbinB = floor(benfordize);
//hotbin becomes the Benford bin value for this number ceiled
long double totalB; totalB = 0;
if ((hotbinB > 0) && (hotbinB < 10))
{
bynL[hotbinB] += 1; if (bynL[hotbinB] > 982) cutbinsL = true;
totalB += (301-bynL[1]); totalB += (176-bynL[2]); totalB += (125-bynL[3]);
totalB += (97-bynL[4]); totalB += (79-bynL[5]); totalB += (67-bynL[6]);
totalB += (58-bynL[7]); totalB += (51-bynL[8]); totalB += (46-bynL[9]); bynL[hotbinB] -= 1;
} else hotbinB = 10;
//produce total number- smaller is closer to Benford real
long double outputSample;
if (totalA < totalB) {bynL[hotbinA] += 1; outputSample = floor(inputSampleL);}
else {bynL[hotbinB] += 1; outputSample = floor(inputSampleL+1);}
//assign the relevant one to the delay line
//and floor/ceil signal accordingly
if (cutbinsL) {
bynL[1] *= 0.99; bynL[2] *= 0.99; bynL[3] *= 0.99; bynL[4] *= 0.99; bynL[5] *= 0.99;
bynL[6] *= 0.99; bynL[7] *= 0.99; bynL[8] *= 0.99; bynL[9] *= 0.99; bynL[10] *= 0.99;
}
noiseShapingL += outputSample - drySampleL;
if (noiseShapingL > fabs(inputSampleL)) noiseShapingL = fabs(inputSampleL);
if (noiseShapingL < -fabs(inputSampleL)) noiseShapingL = -fabs(inputSampleL);
if (processing == 1) inputSampleL = outputSample / 32768.0;
else inputSampleL = outputSample / 8388608.0;
if (inputSampleL > 1.0) inputSampleL = 1.0;
if (inputSampleL < -1.0) inputSampleL = -1.0;
//finished NJAD L
//NJAD R
benfordize = floor(inputSampleR);
while (benfordize >= 1.0) benfordize /= 10;
while (benfordize < 1.0 && benfordize > 0.0000001) benfordize *= 10;
hotbinA = floor(benfordize);
//hotbin becomes the Benford bin value for this number floored
totalA = 0;
if ((hotbinA > 0) && (hotbinA < 10))
{
bynR[hotbinA] += 1; if (bynR[hotbinA] > 982) cutbinsR = true;
totalA += (301-bynR[1]); totalA += (176-bynR[2]); totalA += (125-bynR[3]);
totalA += (97-bynR[4]); totalA += (79-bynR[5]); totalA += (67-bynR[6]);
totalA += (58-bynR[7]); totalA += (51-bynR[8]); totalA += (46-bynR[9]); bynR[hotbinA] -= 1;
} else hotbinA = 10;
//produce total number- smaller is closer to Benford real
benfordize = ceil(inputSampleR);
while (benfordize >= 1.0) benfordize /= 10;
while (benfordize < 1.0 && benfordize > 0.0000001) benfordize *= 10;
hotbinB = floor(benfordize);
//hotbin becomes the Benford bin value for this number ceiled
totalB = 0;
if ((hotbinB > 0) && (hotbinB < 10))
{
bynR[hotbinB] += 1; if (bynR[hotbinB] > 982) cutbinsR = true;
totalB += (301-bynR[1]); totalB += (176-bynR[2]); totalB += (125-bynR[3]);
totalB += (97-bynR[4]); totalB += (79-bynR[5]); totalB += (67-bynR[6]);
totalB += (58-bynR[7]); totalB += (51-bynR[8]); totalB += (46-bynR[9]); bynR[hotbinB] -= 1;
} else hotbinB = 10;
//produce total number- smaller is closer to Benford real
if (totalA < totalB) {bynR[hotbinA] += 1; outputSample = floor(inputSampleR);}
else {bynR[hotbinB] += 1; outputSample = floor(inputSampleR+1);}
//assign the relevant one to the delay line
//and floor/ceil signal accordingly
if (cutbinsR) {
bynR[1] *= 0.99; bynR[2] *= 0.99; bynR[3] *= 0.99; bynR[4] *= 0.99; bynR[5] *= 0.99;
bynR[6] *= 0.99; bynR[7] *= 0.99; bynR[8] *= 0.99; bynR[9] *= 0.99; bynR[10] *= 0.99;
}
noiseShapingR += outputSample - drySampleR;
if (noiseShapingR > fabs(inputSampleR)) noiseShapingR = fabs(inputSampleR);
if (noiseShapingR < -fabs(inputSampleR)) noiseShapingR = -fabs(inputSampleR);
if (processing == 1) inputSampleR = outputSample / 32768.0;
else inputSampleR = outputSample / 8388608.0;
if (inputSampleR > 1.0) inputSampleR = 1.0;
if (inputSampleR < -1.0) inputSampleR = -1.0;
//finished NJAD R
//does not use 64 bit stereo floating point dither
*out1 = inputSampleL;
*out2 = inputSampleR;
*in1++;
*in2++;
*out1++;
*out2++;
}
}
|
