aboutsummaryrefslogtreecommitdiffstats
path: root/railties/test/commands
Commit message (Collapse)AuthorAgeFilesLines
* Fix `rails routes -c` for controller name consists of multiple word.Yoshiyuki Kinjo2018-08-201-22/+64
|
* Move 'rails initializers' command to Rails::CommandAnnie-Claude Côté2018-08-161-0/+32
|
* Adds Rails:Command for `dev:cache` that has the same behaviour as the rake taskAnnie-Claude Côté2018-08-131-0/+65
|
* Merge pull request #32381 from q-centrix/update-codeclimate-configsRichard Schneeman2018-07-251-5/+2
|\ | | | | Turn on performance based cops
| * Turn on performance based copsDillon Welch2018-07-231-5/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use attr_reader/attr_writer instead of methods method is 12% slower Use flat_map over map.flatten(1) flatten is 66% slower Use hash[]= instead of hash.merge! with single arguments merge! is 166% slower See https://github.com/rails/rails/pull/32337 for more conversation
* | Merge pull request #33229 from ↵Matthew Draper2018-07-253-4/+4
|\ \ | |/ |/| | | | | albertoalmagro/albertoalmagro/prefer-rails-command-over-bin-rails Prefer rails command over bin/rails
| * Show rails instead of bin/rails on USAGE instructionsAlberto Almagro2018-07-061-2/+2
| | | | | | | | | | With this commit, rails commands usage instructions display now +rails+ instead of +bin/rails+ within their recommendations.
| * Recommend use of rails over bin/railsAlberto Almagro2018-07-062-2/+2
| | | | | | | | | | | | | | | | | | As discussed in #33203 rails command already looks for, and runs, bin/rails if it is present. We were mixing recommendations within guides and USAGE guidelines, in some files we recommended using rails, in others bin/rails and in some cases we even had both options mixed together.
* | Allow to explicitly specify whether to output Rails' log to stdoutMarkus Doits2018-07-081-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Before Rails' logger output is mirrored to std out if: * environment is development and * the process is not daemonized It was not possible to change that behaviour, e.g. to disable log output in that case or enable it in other cases. Now you can explicitly disable or enable output with the new command line switch `--log-to-stdout`, regardless of any other circumstances. ``` // enable output in production rails server -e production --log-to-stdout // disable output in development rails server -e development --no-log-to-stdout ``` Enabling output when daemonized still makes no sense (since tty is detached), but this is ignored for now. If the command line flag is not specified, old behaviour still applies, so this change is completely backward compatible.
* | Don't show unneeded deprecation warning on server restart.Kasper Timm Hansen2018-07-071-3/+2
|/ | | | | | | | | | | | | | | | | If booting a server via `rails s -u puma`, we'd convert the option to a `using` positional. When using `rails restart` our `restart_command` would the option converted to the using positional and put that in the restart command. Thus we'd show users deprecation warnings for our own code. Fix that by converting a passed positional to an option instead. Also: fix initialize method signature. The local_options are an array, not a hash. But don't even bother assigning defaults as Thor passes them in.
* Make NotesCommand tests more performant by getting rid of unecessary mapAnnie-Claude Côté2018-07-051-12/+12
| | | | | | | * Get rid of map and replace it with a multiplication of "\n" to generate document with multiple line preceding the annotation * Reduce number from 1000 to 100 since it achieves the same goal * Only keep one test for the multiple lines document since it's unecessary to test multiple times * Update some language in tests names to make it clearer what we are testing
* Merge pull request #33220 from anniecodes/notes-commandKasper Timm Hansen2018-07-051-0/+128
|\ | | | | Adds `Rails::Command::NotesCommand` and makes `rake notes` use it under the hood
| * Adds support to register directories and extensions to NotesCommandAnnie-Claude Côté2018-07-041-0/+44
| | | | | | | | | | * Require the application and environnement in the notes command in order to load the config files * Adds tests for both register_directories and register_extensions added to a config file
| * Adds a Rails::Command for NotesAnnie-Claude Côté2018-07-041-0/+84
| | | | | | | | | | | | | | | | * It is called with `rails notes` * It defaults to displaying [OPTIMIZE, FIXME and TODO] annotations * It accepts custom annotations by using `rails notes -a CUSTOM_ANNOTATION OTHER_ANNOTATION` * It defaults to look for annotations in [app config db lib test] as dictated by SourceAnnotationExtractor * It supports ENV["SOURCE_ANNOTATION_DIRECTORIES"] but adds a deprecation warning and recommends using register_directories instead
* | Add an assertion that `credentials:edit` works when `RAILS_MASTER_KEY` env ↵yuuji.yaginuma2018-06-241-1/+1
|/ | | | is specified
* Replace `assert !` with `assert_not`Daniel Colson2018-04-191-12/+12
| | | | | This autocorrects the violations after adding a custom cop in 3305c78dcd.
* Deprecate support for using `HOST` environment to specify server IP (#32540)Yuji Yaginuma2018-04-161-1/+15
| | | | | | | | | | | | At SuSE, `$HOST` is set by default and is equal to `$HOSTNAME`. https://www.suse.com/documentation/sled11/book_sle_admin/data/sec_adm_variables.html Therefore, by default, it binds to hostname instead of `localhost`. This seems not to be appropriate as default behavior. In order to avoid the name of the environment variable being used, I changed the environment variable from `HOST` to `BINDING`. Fixes #29516.
* Use `did_you_mean` spell checker for option suggestionsGenadi Samokovarov2018-03-231-1/+1
| | | | | | | | | | | Now that we require Ruby over `2.3`, we can replace the current suggestion methods we have with tooling from the `did_you_mean` gem. There is a small user visible change and this is that we now offer a single suggestion for misspelled options. We are suggesting fixes during generator invocation and during a mistyped rails server rack handler. In both cases, if we don't make a proper prediction on the first match, we won't do so in the second or third one, so in my mind, this is okay.
* Rely on Rails::Command's help output.Kasper Timm Hansen2018-03-131-57/+58
| | | | | | | | | | | | | | | | | | | | | We end up with: ``` Usage: bin/rails routes [options] Options: -c, [--controller=CONTROLLER] # Filter by a specific controller, e.g. PostsController or Admin::PostsController. -g, [--grep=GREP] # Grep routes by a specific pattern. -E, [--expanded], [--no-expanded] # Print routes expanded vertically with parts explained. ``` which does miss the bit about routes being printed in order. Also: * Renames options to ease help output readability, then clarifies each option. * Fixes a bunch of indentation.
* Merge pull request #32160 from bogdanvlviv/improve-rails-routes-expandedKasper Timm Hansen2018-03-111-38/+47
|\ | | | | Draw line of a route name to the end of row console on `rails routes --expanded`
| * Draw line of a route name to the end of row console on `rails routes --expanded`bogdanvlviv2018-03-051-38/+47
| | | | | | | | | | | | | | In order to get width of console use `IO::console_size`, See https://ruby-doc.org/stdlib-2.4.1/libdoc/io/console/rdoc/IO.html#method-c-console_size Related to #32130
* | Remove extra arg passed to `Rails::Command::RoutesTest#run_routes_command`bogdanvlviv2018-03-051-1/+1
|/ | | | Related to 6bd33d66dde015a55912af20b469788ba20ddb4e
* Fix "NameError: undefined local variable or method `host'"yuuji.yaginuma2018-03-051-0/+6
| | | | The `host` and `port` can't use this context.
* Merge pull request #32058 from gsamokovarov/rails-server-x-optionKasper Timm Hansen2018-03-041-4/+29
|\ | | | | Introduce explicit rails server handler option
| * Introduce explicit rails server handler optionGenadi Samokovarov2018-03-041-4/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I mistype `rails server production` instead of `rails server -e production` expecting to lunch a server in the production environment all the time. However, the signature of `rails server --help` is: ``` Usage: rails server [puma, thin etc] [options] ``` This means that the `production` argument is being interpreted as a Rack server handler like Puma, Thin or Unicorn. Should we argue for the `rails server production`? I'm not sure of the reasons, but the `rails console production` behavior was deprecated in: https://github.com/rails/rails/pull/29358, so parity with the existing `rails console production` usage may not hold anymore. In any case, this PR introduces an explicit option for the Rack servers configuration. The option is called `--using` (or `-u` for short) to avoid the `rails server --server` tantrum. The new interface of `rails server` is: ``` Usage: rails server [using] [options] Options: -p, [--port=port] # Runs Rails on the specified port - defaults to 3000. -b, [--binding=IP] # Binds Rails to the specified IP - defaults to 'localhost' in development and '0.0.0.0' in other environments'. -c, [--config=file] # Uses a custom rackup configuration. # Default: config.ru -d, [--daemon], [--no-daemon] # Runs server as a Daemon. -e, [--environment=name] # Specifies the environment to run this server under (development/test/production). -u, [--using=name] # Specifies the Rack server used to run the application (thin/puma/webrick). -P, [--pid=PID] # Specifies the PID file. # Default: tmp/pids/server.pid -C, [--dev-caching], [--no-dev-caching] # Specifies whether to perform caching in development. [--early-hints], [--no-early-hints] # Enables HTTP/2 early hints. ``` As a bonus, if you mistype the server to use, you'll get an auto-correction message: ``` $ rails s tin Could not find handler "tin". Maybe you meant "thin" or "cgi"? Run `rails server --help` for more options. ```
* | Fix routes command tests broken in e137831726.Kasper Timm Hansen2018-03-041-23/+16
|/
* Clean up `RoutesTest` a bityuuji.yaginuma2018-03-011-8/+6
| | | | | | * Remove unused require * Remove redundant `test` * Change `rake` to `rails`
* Add --expanded option to "rails routes"Benoit Tigeot2018-02-281-0/+47
| | | | | | | | | | | | | | | | | | | | | | | | | When using rails routes with small terminal or complicated routes it can be very difficult to understand where is the element listed in header. psql had the same issue, that's why they created "expanded mode" you can switch using `\x` or by starting psql with ``` -x --expanded Turn on the expanded table formatting mode. This is equivalent to the \x command. ``` The output is similar to one implemented here for rails routes: db_user-# \du List of roles -[ RECORD 1 ]---------------------------------------------- Role name | super Attributes | Superuser, Create role, Create DB Member of | {} -[ RECORD 2 ]---------------------------------------------- Role name | role Attributes | Superuser, Create role, Create DB, Replication Member of | {}
* Move rake routes task to rails commandBenoit Tigeot2018-02-271-0/+127
| | | | | | After a discussion with matthewd. It was mentioned that rake tasks need to be moved to rails command. See: https://github.com/rails/rails/issues/32117
* Do not add master key when `RAILS_MASTER_KEY` env specified (#31922)Yuji Yaginuma2018-02-082-0/+24
| | | Fixes #31917
* Use assert_predicate and assert_not_predicateDaniel Colson2018-01-251-5/+5
|
* Raise an error only when `require_master_key` is specifiedyuuji.yaginuma2017-12-182-8/+36
| | | | | | | | | To prevent errors from being raise in environments where credentials is unnecessary. Context: https://github.com/rails/rails/issues/31283#issuecomment-348801489 Fixes #31283
* Do not overwrite by default if credentials already existsyuuji.yaginuma2017-11-301-0/+8
| | | | Fixes #31286
* Add CLI to manage encrypted files/configs.Wojciech Wnętrzak2017-11-152-1/+84
| | | | | | | | | | | | | | | | | | To edit/show encrypted file: ``` bin/rails encrypted:edit config/staging_tokens.yml.enc bin/rails encrypted:edit config/staging_tokens.yml.enc --key config/staging.key bin/rails encrypted:show config/staging_tokens.yml.enc ``` Also provides a backing Rails.application.encrypted API for Ruby access: ```ruby Rails.application.encrypted("config/staging_tokens.yml.enc").read Rails.application.encrypted("config/staging_tokens.yml.enc").config Rails.application.encrypted("config/staging_tokens.yml.enc", key: "config/staging.key") ```
* Deprecate encrypted secrets in favor of credentials.Kasper Timm Hansen2017-11-121-12/+37
| | | | | | | | Allow edits of existing encrypted secrets generated on Rails 5.1, but refer to credentials when attempting to setup. This also removes the need for any of the setup code, so the generator can be ripped out altogether.
* Fix test name for daemon option testyuuji.yaginuma2017-10-141-2/+2
| | | | | | | In this test file, "server option" refers to the server used to start Rails(e.g. `puma`, `thin`). But this test, "server option" is not specified. Therefore, I think that it is incorrect that `server_option` is included in the test name.
* Added test case for starting rails with daemon option, this should set the ↵Pierre Hedkvist2017-10-131-0/+12
| | | | option[:daemonize] to true, otherwise the option[:daemonize] will be set to false
* Simplify parse arguments in `ConsoleTest`yuuji.yaginuma2017-10-081-16/+3
| | | | | If need a parse result of arguments, can obtain it by creating an instance of the command.
* Implement H2 Early Hints for Railseileencodes2017-10-041-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When puma/puma#1403 is merged Puma will support the Early Hints status code for sending assets before a request has finished. While the Early Hints spec is still in draft, this PR prepares Rails to allowing this status code. If the proxy server supports Early Hints, it will send H2 pushes to the client. This PR adds a method for setting Early Hints Link headers via Rails, and also automatically sends Early Hints if supported from the `stylesheet_link_tag` and the `javascript_include_tag`. Once puma supports Early Hints the `--early-hints` argument can be passed to the server to enable this or set in the puma config with `early_hints(true)`. Note that for Early Hints to work in the browser the requirements are 1) a proxy that can handle H2, and 2) HTTPS. To start the server with Early Hints enabled pass `--early-hints` to `rails s`. This has been verified to work with h2o, Puma, and Rails with Chrome. The commit adds a new option to the rails server to enable early hints for Puma. Early Hints spec: https://tools.ietf.org/html/draft-ietf-httpbis-early-hints-04 [Eileen M. Uchitelle, Aaron Patterson]
* Add tests for credentials commandyuuji.yaginuma2017-09-151-0/+19
|
* Make master key added to gitignore the same value as when creating appplicationyuuji.yaginuma2017-09-141-0/+30
| | | | | | | | | For gitignore generated by `rails new`, key with a leading slash is specified. https://github.com/rails/rails/blob/69f976b859cae7f9d050152103da018b7f5dda6d/railties/lib/rails/generators/rails/app/templates/gitignore#L11 Therefore, when executing `credentials:edit`, also need leading slack. In order to avoid such a difference, fixed to use same method for `rails new` and `credentials:edit`.
* Run in-app rails commands via fork+load where possibleMatthew Draper2017-09-041-4/+7
| | | | | While this avoids shell argument parsing, we still pass through everything in our stack.
* Fix `can't modify frozen String` error in `DBConsole`yuuji.yaginuma2017-08-291-0/+6
| | | | | | | | | Without this, `dbconsole` raises an error as follwing: ``` RuntimeError: can't modify frozen String railties/lib/rails/commands/dbconsole/dbconsole_command.rb:79:in `start' ```
* Make `restart` and `dev:cache` tasks work when customizing pid file pathyuuji.yaginuma2017-08-211-1/+1
| | | | | | | | | | Originally, it hard-coded pid file path. It can not be removed when customizing pid file path. But rake task can not get pid file path. Therefore, do not remove file in rake task, makes it possible to judge whether it is restart from the argument of the command and removes the file in server command. Fixes #29306
* Adding frozen_string_literal pragma to Railties.Pat Allan2017-08-144-0/+8
|
* Properly expand the environment's nameRobin Dupret2017-07-162-0/+11
| | | | | | | | | Running the `console` and `dbconsole` commands with a regular argument as the environment's name automatically expand it to match an existing environment (e.g. dev for development). This feature wasn't available using the `--environment` (a.k.a `-e`) option.
* Deprecate environment as an argument for dbconsole and consoleRobin Dupret2017-07-162-12/+24
| | | | | | People should rather rely on the `-e` or `--environment` options to specify in which environment they want to work. This will allow us to specify the connection to pick as a regular argument in the future.
* Allow to pass a connection to the `dbconsole` commandRobin Dupret2017-07-161-0/+43
| | | | | | | | | | | Since 0a4f6009, it's possible to specify a 3-level database configuration to gather connections by environment. The `dbconsole` command will try to look for a database configuration which points to the current environment but with such flavour, the environment key is flushed out so let's add the ability to specify the connection and pick `primary` by default to be consistent with Active Record.
* Add `rails secrets:show` commandyuuji.yaginuma2017-07-071-0/+13
| | | | | | | | | | | When secrets confirmed with the `secrets:edit` command, `secrets.yml.enc` will change without updating the secrets. Therefore, even if only want to check secrets, the difference will come out. This is a little inconvenient. In order to solve this problem, added the `secrets:show` command. If just want to check secrets, no difference will occur use this command.
* Revert "Merge pull request #29540 from kirs/rubocop-frozen-string"Matthew Draper2017-07-024-4/+0
| | | | | This reverts commit 3420a14590c0e6915d8b6c242887f74adb4120f9, reversing changes made to afb66a5a598ce4ac74ad84b125a5abf046dcf5aa.
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 10:47:37 +0000