aboutsummaryrefslogtreecommitdiffstats
path: root/railties/CHANGELOG.md
Commit message (Collapse)AuthorAgeFilesLines
* Add deprecations related to `rails notes` command to ChangelogAnnie-Claude Côté2018-07-091-0/+19
| | | | | | | * SOURCE_ANNOTATION_DIRECTORIES deprecation * Deprecation of `rake notes`, use `rails notes` instead * Deprecation of `rails notes:custom ANNOTATION=custom`, `rails notes:optimize`, `rails notes:todo`, and `rails notes:fixme` in favor of passing `-annotations` or `-a` to `rails notes` * They have all been deprecrated in https://github.com/rails/rails/pull/33220
* Don't generate yarn's contents in `app:update` task if it's skippedTsukuru Tanimichi2018-05-161-0/+2
|
* Don't generate `config/spring.rb` in `app:update` task when spring isn't loadedTsukuru Tanimichi2018-05-131-1/+5
|
* Don't generate assets' initializer in `app:update` task if sprockets is skippedTsukuru Tanimichi2018-05-051-0/+4
| | | | | | | | | | | | | | | | Execute `rails new myapp -S` and then upgrade the app by using the `app:update` task, `bin/rails c` results in `NoMethodError`. ``` $ bin/rails app:update $ bin/rails c Traceback (most recent call last): 44: from bin/rails:4:in `<main>' (snip) 1: from /Users/tanimichi.tsukuru/ghq/github.com/moneyforward/moneyplus/config/initializers/assets.rb:4:in `<top (required)>' /Users/tanimichi.tsukuru/ghq/github.com/moneyforward/moneyplus/vendor/bundle/ruby/2.5.0/gems/railties-5.2.0/lib/rails/railtie/configuration.rb:97:in `method_missing': undefined method `assets' for #<Rails::Application::Configuration:0x00007fcb8d3697e0> (NoMethodError) Did you mean? asset_host ```
* Make the master.key readable only by the ownerJose Luis Duran2018-04-191-0/+17
| | | | | | | | | | | | | | This change may only apply to POSIX-compliant systems. Previously: $ ls -l config/master.key -rw-r--r-- 1 owner group 32 Jan 1 00:00 master.key Now: $ ls -l config/master.key -rw------- 1 owner group 32 Jan 1 00:00 master.key
* Deprecate support for using `HOST` environment to specify server IP (#32540)Yuji Yaginuma2018-04-161-0/+8
| | | | | | | | | | | | At SuSE, `$HOST` is set by default and is equal to `$HOSTNAME`. https://www.suse.com/documentation/sled11/book_sle_admin/data/sec_adm_variables.html Therefore, by default, it binds to hostname instead of `localhost`. This seems not to be appropriate as default behavior. In order to avoid the name of the environment variable being used, I changed the environment variable from `HOST` to `BINDING`. Fixes #29516.
* Remove changelog header for unreleased versionRafael Mendonça França2018-03-131-2/+0
| | | | | | We only add the header when releasing to avoid some conflicts. [ci skip]
* Introduce explicit rails server handler optionGenadi Samokovarov2018-03-041-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I mistype `rails server production` instead of `rails server -e production` expecting to lunch a server in the production environment all the time. However, the signature of `rails server --help` is: ``` Usage: rails server [puma, thin etc] [options] ``` This means that the `production` argument is being interpreted as a Rack server handler like Puma, Thin or Unicorn. Should we argue for the `rails server production`? I'm not sure of the reasons, but the `rails console production` behavior was deprecated in: https://github.com/rails/rails/pull/29358, so parity with the existing `rails console production` usage may not hold anymore. In any case, this PR introduces an explicit option for the Rack servers configuration. The option is called `--using` (or `-u` for short) to avoid the `rails server --server` tantrum. The new interface of `rails server` is: ``` Usage: rails server [using] [options] Options: -p, [--port=port] # Runs Rails on the specified port - defaults to 3000. -b, [--binding=IP] # Binds Rails to the specified IP - defaults to 'localhost' in development and '0.0.0.0' in other environments'. -c, [--config=file] # Uses a custom rackup configuration. # Default: config.ru -d, [--daemon], [--no-daemon] # Runs server as a Daemon. -e, [--environment=name] # Specifies the environment to run this server under (development/test/production). -u, [--using=name] # Specifies the Rack server used to run the application (thin/puma/webrick). -P, [--pid=PID] # Specifies the PID file. # Default: tmp/pids/server.pid -C, [--dev-caching], [--no-dev-caching] # Specifies whether to perform caching in development. [--early-hints], [--no-early-hints] # Enables HTTP/2 early hints. ``` As a bonus, if you mistype the server to use, you'll get an auto-correction message: ``` $ rails s tin Could not find handler "tin". Maybe you meant "thin" or "cgi"? Run `rails server --help` for more options. ```
* Add --expanded option to "rails routes"Benoit Tigeot2018-02-281-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | When using rails routes with small terminal or complicated routes it can be very difficult to understand where is the element listed in header. psql had the same issue, that's why they created "expanded mode" you can switch using `\x` or by starting psql with ``` -x --expanded Turn on the expanded table formatting mode. This is equivalent to the \x command. ``` The output is similar to one implemented here for rails routes: db_user-# \du List of roles -[ RECORD 1 ]---------------------------------------------- Role name | super Attributes | Superuser, Create role, Create DB Member of | {} -[ RECORD 2 ]---------------------------------------------- Role name | role Attributes | Superuser, Create role, Create DB, Replication Member of | {}
* Remove changelogs for Rails 6.0 since they were backported to `5-2-stable`bogdanvlviv2018-02-261-8/+0
| | | | | | | | | | | | | | | | Remove railties' changelog added by 7340596de45dc4c0f62a287b6acc4e71d8ee6c60 since it was backported to `5-2-stable` via ac99916fcf7bf27bb1519d4f7387c6b4c5f0463d Remove activesupport's changelog added by 1077ae96b34b5a1dfbf10ee0c40b1ceb1eb6b30b since it was backported to `5-2-stable` via a2b97e4ffef971607a1be8fc7909f099b6840f36 Remove activesupport's changelog added by 0d41a76d0c693000005d79456dee7f9299f5e8d4 since it was backported to `5-2-stable` via cdce6a709e1cbc98fff009effc3b1b3ce4c7e8db Remove activestorage's changelog added by d57c52a385eb57c6ce8c6d124ab5e186f931d142 since it was backported to `5-2-stable` via 5292cdf59a2052c453d6016c69b90b790cbf2547 Follow up c113bdc9d0c2cffd535ca97aff85c4bdc46b11f6
* Rails 6 requires Ruby 2.4.1+Jeremy Daer2018-02-171-0/+7
| | | | | | Skipping over 2.4.0 to sidestep the `"symbol_from_string".to_sym.dup` bug. References #32028
* Fix changelog entry [ci skip]Rafael Mendonça França2018-02-161-1/+7
|
* Add SuppressedSummaryReporter and TestUnitReporter only if necessaryKevin Robatel2018-02-151-1/+1
|
* Start Rails 6.0 development!!!Rafael Mendonça França2018-01-301-162/+1
| | | | :tada::tada::tada:
* Improve the deprecation message for using subclass of Rails::Application to ↵Prathamesh Sonpatki2018-01-071-1/+1
| | | | start the Rails server
* Preparing for 5.2.0.beta2 releaseRafael Mendonça França2017-11-281-0/+5
|
* Preparing for 5.2.0.beta1 releaseRafael Mendonça França2017-11-271-0/+2
|
* Deprecate an `after_bundle` callback in Rails plugin templatesyuuji.yaginuma2017-11-181-0/+4
| | | | | | | | | Since fbd1e98cf983572ca9884f17f933ffe92833632a, Rails plugin does not run `bundle install` when generating. Therefore, `after_bundle` callback is not actually executed after `bundle`. Since there is a difference between the name and the actual behavior, I think that should be remove.
* Add --skip-active-storage and do so automatically when --skip-active-record ↵bogdanvlviv2017-11-061-0/+6
| | | | | | | | | | | | is used Closes #30102 Revert part 787fe90dc0a7c5b91bb5af51f2858ea8c4676268 --skip-active-storage pass throughs `rails plugin new` Add changelog entry about default initialization of Active Storage
* redis-rb 4.0 supportJeremy Daer2017-10-081-0/+4
| | | | | | | | * Use `gem 'redis', '~> 4.0'` for new app Gemfiles * Loosen Action Cable redis-rb dep to `>= 3.3, < 5` * Bump redis-namespace for looser Redis version dep * Avoid using the underlying `redis.client` directly * Use `Redis.new` instead of `Redis.connect`
* Add `mini_magick` to default `Gemfile` as commentYoshiyuki Hirano2017-09-171-0/+4
| | | | | | * If we want to transform image on ActiveStorage, we should bundle `mini_magick`. * I've added comment block to default `Gemfile` to be easier to install this.
* Add credentials using a generic EncryptedConfiguration class (#30067)David Heinemeier Hansson2017-09-111-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * WIP: Add credentials using a generic EncryptedConfiguration class This is sketch code so far. * Flesh out EncryptedConfiguration and test it * Better name * Add command and generator for credentials * Use the Pathnames * Extract EncryptedFile from EncryptedConfiguration and add serializers * Test EncryptedFile * Extract serializer validation * Stress the point about losing comments * Allow encrypted configuration to be read without parsing for display * Use credentials by default and base them on the master key * Derive secret_key_base in test/dev, source it from credentials in other envs And document the usage. * Document the new credentials setup * Stop generating the secrets.yml file now that we have credentials * Document what we should have instead Still need to make it happen, tho. * [ci skip] Keep wording to `key base`; prefer defaults. Usually we say we change defaults, not "spec" out a release. Can't use backticks in our sdoc generated documentation either. * Abstract away OpenSSL; prefer MessageEncryptor. * Spare needless new when raising. * Encrypted file test shouldn't depend on subclass. * [ci skip] Some woordings. * Ditch serializer future coding. * I said flip it. Flip it good. * [ci skip] Move require_master_key to the real production.rb. * Add require_master_key to abort the boot process. In case the master key is required in a certain environment we should inspect that the key is there and abort if it isn't. * Print missing key message and exit immediately. Spares us a lengthy backtrace and prevents further execution. I've verified the behavior in a test app, but couldn't figure the test out as loading the app just exits immediately with: ``` /Users/kasperhansen/Documents/code/rails/activesupport/lib/active_support/testing/isolation.rb:23:in `load': marshal data too short (ArgumentError) from /Users/kasperhansen/Documents/code/rails/activesupport/lib/active_support/testing/isolation.rb:23:in `run' from /Users/kasperhansen/.rbenv/versions/2.4.1/lib/ruby/gems/2.4.0/gems/minitest-5.10.2/lib/minitest.rb:830:in `run_one_method' from /Users/kasperhansen/.rbenv/versions/2.4.1/lib/ruby/gems/2.4.0/gems/minitest-5.10.2/lib/minitest/parallel.rb:32:in `block (2 levels) in start' ``` It's likely we need to capture and prevent the exit somehow. Kernel.stub(:exit) didn't work. Leaving it for tomorrow. * Fix require_master_key config test. Loading the app would trigger the `exit 1` per require_master_key's semantics, which then aborted the test. Fork and wait for the child process to finish, then inspect the exit status. Also check we aborted because of a missing master key, so something else didn't just abort the boot. Much <3 to @tenderlove for the tip. * Support reading/writing configs via methods. * Skip needless deep symbolizing. * Remove save; test config reader elsewhere. * Move secret_key_base check to when we're reading it. Otherwise we'll abort too soon since we don't assign the secret_key_base to secrets anymore. * Add missing string literal comments; require unneeded yaml require. * ya ya ya, rubocop. * Add master_key/credentials after bundle. Then we can reuse the existing message on `rails new bc4`. It'll look like: ``` Using web-console 3.5.1 from https://github.com/rails/web-console.git (at master@ce985eb) Using rails 5.2.0.alpha from source at `/Users/kasperhansen/Documents/code/rails` Using sass-rails 5.0.6 Bundle complete! 16 Gemfile dependencies, 72 gems now installed. Use `bundle info [gemname]` to see where a bundled gem is installed. Adding config/master.key to store the master encryption key: 97070158c44b4675b876373a6bc9d5a0 Save this in a password manager your team can access. If you lose the key, no one, including you, can access anything encrypted with it. create config/master.key ``` And that'll be executed even if `--skip-bundle` was passed. * Ensure test app has secret_key_base. * Assign secret_key_base to app or omit. * Merge noise * Split options for dynamic delegation into its own method and use deep symbols to make it work * Update error to point to credentials instead * Appease Rubocop * Validate secret_key_base when reading it. Instead of relying on the validation in key_generator move that into secret_key_base itself. * Fix generator and secrets test. Manually add config.read_encrypted_secrets since it's not there by default anymore. Move mentions of config/secrets.yml to config/credentials.yml.enc. * Remove files I have no idea how they got here. * [ci skip] swap secrets for credentials. * [ci skip] And now, changelogs are coming.
* Support multiple versions arguments for `gem` method of GeneratorsYoshiyuki Hirano2017-08-191-0/+4
|
* Add --skip-yarn option to the plugin generatorbogdanvlviv2017-08-151-0/+4
| | | | | Add SharedGeneratorTests#application_path This method will help to DRY in files app_generator_test.rb, plugin_generator_test.rb
* Formatting CHANGELOGs [ci skip]Ryuta Kamizono2017-08-151-2/+2
| | | | | | Add missing backticks Add missing * Add missing .
* Optimize routes indentationYoshiyuki Hirano2017-08-141-0/+4
|
* Merge pull request #30166 from yhirano55/fix_generator_method_environmentRafael Mendonça França2017-08-111-0/+4
|\ | | | | | | Optimize indentation for generator actions
| * Optimize indentation for generator actionsYoshiyuki Hirano2017-08-111-0/+4
| |
* | Merge pull request #30116 from ↵Rafael Mendonça França2017-08-111-0/+4
|\ \ | | | | | | | | | | | | | | | yhirano55/skip_unused_components_when_running_rails_command_in_plugin Skip unused components when running `bin/rails` in Rails plugin
| * | Skip unused components when running in Rails pluginYoshiyuki Hirano2017-08-091-0/+4
| | |
* | | Merge pull request #30110 from yhirano55/add_git_sourceRafael Mendonça França2017-08-111-0/+4
|\ \ \ | |_|/ |/| | | | | Add git_source to Gemfile for plugin generator
| * | Add git_source to Gemfile for plugin generatorYoshiyuki Hirano2017-08-091-0/+4
| |/
* / `--skip-action-cable` pass throughs `rails plugin new`bogdanvlviv2017-08-101-0/+4
|/
* Merge pull request #30127 from y-yagi/deprecate_support_of_older_config_ruRafael França2017-08-081-0/+4
|\ | | | | Deprecate support of older `config.ru`
| * Deprecate support of older `config.ru`yuuji.yaginuma2017-08-081-0/+4
| | | | | | | | | | | | | | | | Since Rails 4.0, `config.ru` generated by default uses instances of `Rails.application`. Therefore, I think that it is good to deprecate the old behavior. Related: #9669
* | Lint railties/CHANGELOG.mdJon Moss2017-08-061-2/+2
|/ | | | | | Light grammar edits. [ci skip]
* Set Ruby version in Gemfile and .ruby-version by defaultAlberto Almagro2017-07-311-0/+6
|
* Revert "Include rack-mini-profiler by default"Rafael França2017-07-241-5/+0
|
* Include rack-mini-profiler by defaultschneems2017-07-241-0/+5
| | | | | | | | | | | | I've used many development related performance tools, but the single most consistently helpful tool is `rack-mini-profiler`. The tool provides a lightweight UI element for each page, that shows the server response time. When clicked it expands to show more detail: ![](https://www.dropbox.com/s/0aciw4mk8c059n0/Screenshot%202017-07-24%2010.24.24.png?dl=1) This can be used to detect expensive queries, N+1 issues and general performance related problems.
* support `-` as an argument to `rails runner`Cody Cutrer2017-07-171-0/+5
| | | | | | | | | | | | | in Rails 4.0, you could use `/dev/stdin` on both Linux and Mac, but with the switch to Kernel.load in Rails 4.1, this broke on Linux (you get a LoadError). Instead, explicitly detect `-` as meaning stdin, then read from stdin explicitly, instead of performing file gymnastics. This should now work on any platform uniformly. Passing a script via stdin is useful when you're sshing to a server, and the script you want to run is stored locally. You could theoretically pass the entire script on the command line, but in reality you'll run into problems with the command being too long.
* Add bootsnap to default Gemfile:Burke Libbey2017-07-171-0/+4
| | | | | | Bootsnap precomputes load path resolution and caches ruby ISeq and YAML parsing/compilation, reducing application boot time by approximately 50% on supported configurations.
* Properly expand the environment's nameRobin Dupret2017-07-161-0/+5
| | | | | | | | | Running the `console` and `dbconsole` commands with a regular argument as the environment's name automatically expand it to match an existing environment (e.g. dev for development). This feature wasn't available using the `--environment` (a.k.a `-e`) option.
* Deprecate environment as an argument for dbconsole and consoleRobin Dupret2017-07-161-0/+14
| | | | | | People should rather rely on the `-e` or `--environment` options to specify in which environment they want to work. This will allow us to specify the connection to pick as a regular argument in the future.
* Allow to pass a connection to the `dbconsole` commandRobin Dupret2017-07-161-0/+7
| | | | | | | | | | | Since 0a4f6009, it's possible to specify a 3-level database configuration to gather connections by environment. The `dbconsole` command will try to look for a database configuration which points to the current environment but with such flavour, the environment key is flushed out so let's add the ability to specify the connection and pick `primary` by default to be consistent with Active Record.
* Do not generate unused components contents in `app:update` taskyuuji.yaginuma2017-07-161-0/+7
| | | | | | | | | | | | Currently, `app:update` generates all contents regardless of the component using in application. For example, even if not using Action Cable, `app:update` will generate a contents related to Action Cable. This is a little inconvenient. This PR checks the existence of the component and does not generate unnecessary contents. Can not check all options in this way. However, it will be able to prevent the generation of unnecessary files.
* * Don't eagerly require Rails' minitest plugin.Kasper Timm Hansen2017-07-101-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | By making the Rails minitest behave like a standard minitest plugin we're much more likely to not break when people use other minitest plugins. Like minitest-focus and pride. To do this, we need to behave like minitest: require files up front and then perform the plugin behavior via the at_exit hook. This also saves us a fair bit of wrangling with test file loading. Finally, since the environment and warnings options have to be applied as early as possible, and since minitest loads plugins at_exit, they have to be moved to the test command. * Don't expect the root method. It's likely this worked because we eagerly loaded the Rails minitest plugin and that somehow defined a root method on `Rails`. * Assign a backtrace to failed exceptions. Otherwise Minitest pukes when attempting to filter the backtrace (which Rails' backtrace cleaner then removes). Means the exception message test has to be revised too. This is likely caused by the rails minitest plugin now being loaded for these tests and assigning a default backtrace cleaner.
* Load environment file in `dbconsole` commandyuuji.yaginuma2017-07-091-0/+6
| | | | | | | | | Currently the environment file is not loaded in `dbconsole` command. Therefore, for example, if use encrypted secrets values in database.yml, `read_encrypted_secrets` will not be true, so the value can not be used correctly. Fixes #29717
* Add `rails secrets:show` commandyuuji.yaginuma2017-07-071-0/+4
| | | | | | | | | | | When secrets confirmed with the `secrets:edit` command, `secrets.yml.enc` will change without updating the secrets. Therefore, even if only want to check secrets, the difference will come out. This is a little inconvenient. In order to solve this problem, added the `secrets:show` command. If just want to check secrets, no difference will occur use this command.
* Allow mounting same engine under several locationsDavid Rodríguez2017-07-051-0/+6
|
* Add backticks [ci skip]Ryuta Kamizono2017-07-031-1/+1
|
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 13:58:58 +0000