Merge docrails

5 files changed, 142 insertions, 150 deletions

diff --git a/railties/guides/source/2_3_release_notes.textile b/railties/guides/source/2_3_release_notes.textile
index cc2e2dc20c..6a97fd2cd1 100644
--- a/railties/guides/source/2_3_release_notes.textile
+++ b/railties/guides/source/2_3_release_notes.textile
@@ -32,7 +32,7 @@ Here's a summary of the rack-related changes:
 * +CGI::Session::MemCacheStore+ has been replaced by +ActionController::Session::MemCacheStore+.
 * +CGI::Session::ActiveRecordStore+ has been replaced by +ActiveRecord::SessionStore+.
 * You can still change your session store with +ActionController::Base.session_store = :active_record_store+.
-* Default sessions options are still set with +ActionController::Base.session = { :key => "..." }+.
+* Default sessions options are still set with +ActionController::Base.session = { :key => "..." }+. However, the +:session_domain+ option has been renamed to +:domain+.
 * The mutex that normally wraps your entire request has been moved into middleware, +ActionController::Lock+.
 * +ActionController::AbstractRequest+ and +ActionController::Request+ have been unified. The new +ActionController::Request+ inherits from +Rack::Request+. This affects access to +response.headers['type']+ in test requests. Use +response.content_type+ instead.
 * +ActiveRecord::QueryCache+ middleware is automatically inserted onto the middleware stack if +ActiveRecord+ has been loaded. This middleware sets up and flushes the per-request Active Record query cache.
diff --git a/railties/guides/source/caching_with_rails.textile b/railties/guides/source/caching_with_rails.textile
index 5c55538283..f1ad7b820d 100644
--- a/railties/guides/source/caching_with_rails.textile
+++ b/railties/guides/source/caching_with_rails.textile
@@ -18,9 +18,11 @@ h3. Basic Caching
 This is an introduction to the three types of caching techniques that Rails
 provides by default without the use of any third party plugins.
 
-To get started make sure +config.action_controller.perform_caching+ is set
-to +true+ for your environment. This flag is normally set in the
-corresponding config/environments/*.rb. By default, caching is disabled for development and test, and enabled for production.
+To start playing with testing you'll want to ensure that
++config.action_controller.perform_caching+ is set
+to +true+ if you're running in development mode. This flag is normally set in the
+corresponding config/environments/*.rb and caching is disabled by default
+ for development and test, and enabled for production.
 
 <ruby>
 config.action_controller.perform_caching = true
@@ -29,51 +31,56 @@ config.action_controller.perform_caching = true
 h4. Page Caching
 
 Page caching is a Rails mechanism which allows the request for a generated
-page to be fulfilled by the webserver, without ever having to go through the
+page to be fulfilled by the webserver (i.e. apache or nginx), without ever having to go through the
 Rails stack at all. Obviously, this is super-fast. Unfortunately, it can't be
 applied to every situation (such as pages that need authentication) and since
 the webserver is literally just serving a file from the filesystem, cache
 expiration is an issue that needs to be dealt with.
 
-So, how do you enable this super-fast cache behavior? Suppose you
+So, how do you enable this super-fast cache behavior?  Simple, let's say you
 have a controller called +ProductsController+ and an +index+ action that lists all
-the products. You could enable caching for this action like this:
+the products
 
 <ruby>
 class ProductsController < ActionController
 
   caches_page :index
 
-  def index; end
+  def index
+    @products = Products.all
+  end
 
 end
 </ruby>
 
-The first time anyone requests products/index, Rails will generate a file
-called +index.html+. If a web server see this file, it will be served in response to the
-next request for products/index, without your Rails application being called.
+The first time anyone requests +/products+, Rails will generate a file
+called +products.html+ and the webserver will then look for that file before it
+passes the next request for +/products+ to your Rails application.
 
-By default, the page cache directory is set to Rails.public_path (which is
-usually set to +File.join(self.root, "public")+ - that is, the public directory under your Rails application's root). This can be configured by
+By default, the page cache directory is set to +Rails.public_path+ (which is
+usually set to the +public+ folder) and this can be configured by
 changing the configuration setting +config.action_controller.page_cache_directory+.
-Changing the default from /public helps avoid naming conflicts, since you may
-want to put other static html in /public, but changing this will require web
+Changing the default from +public+ helps avoid naming conflicts, since you may
+want to put other static html in +public+, but changing this will require web
 server reconfiguration to let the web server know where to serve the cached
 files from.
 
-The page caching mechanism will automatically add a +.html+ extension to
+The Page Caching mechanism will automatically add a +.html+ extension to
 requests for pages that do not have an extension to make it easy for the
-webserver to find those pages. This can be configured by changing the
+webserver to find those pages and this can be configured by changing the
 configuration setting +config.action_controller.page_cache_extension+.
 
-In order to expire this page when a new product is added you could extend the products controller like this:
+In order to expire this page when a new product is added we could extend our
+example controller like this:
 
 <ruby>
 class ProductsController < ActionController
 
   caches_page :index
 
-  def index; end
+  def index
+    @products = Products.all
+  end
 
   def create
     expire_page :action => :index
@@ -85,45 +92,42 @@ end
 If you want a more complicated expiration scheme, you can use cache sweepers
 to expire cached objects when things change. This is covered in the section on Sweepers.
 
-Note: Page caching ignores all parameters, so /products/list?page=1 will be written out to the filesystem as /products/list.html and if someone requests /products/list?page=2, they will be returned the same result as page=1. Be careful when page caching GET parameters in the URL!
+Note: Page caching ignores all parameters. For example +/products?page=1+ will be written out to the filesystem as +products.html+ with no reference to the +page+ parameter. Thus, if someone requests +/products?page=2+ later, they will get the cached first page. Be careful when page caching GET parameters in the URL!
 
 h4. Action Caching
 
-One of the issues with page caching is that you cannot use it for pages that
-require checking code to determine whether the user should be permitted access. This is where Action Caching comes in.
-action caching works like page caching except for the fact that the incoming
-web request does go from the web server to the Rails stack and Action Pack so
-that before filters can be run on it before the cache is served. This allows you to use
-authentication and other restrictions while still serving the
+One of the issues with Page Caching is that you cannot use it for pages that
+require to restrict access somehow. This is where Action Caching comes in.
+Action Caching works like Page Caching except for the fact that the incoming
+web request does go from the webserver to the Rails stack and Action Pack so
+that before filters can be run on it before the cache is served. This allows
+authentication and other restriction to be run while still serving the
 result of the output from a cached copy.
 
-Clearing the cache works in the exact same way as with page caching.
+Clearing the cache works in the exact same way as with Page Caching.
 
-Let's say you only wanted authenticated users to edit or create a Product
-object, but still cache those pages:
+Let's say you only wanted authenticated users to call actions on +ProductsController+.
 
 <ruby>
 class ProductsController < ActionController
 
-  before_filter :authenticate, :only => [ :edit, :create ]
-  caches_page :index
-  caches_action :edit
+  before_filter :authenticate
+  caches_action :index
 
-  def index; end
+  def index
+    @products = Product.all
+  end
 
   def create
-    expire_page :action => :index
-    expire_action :action => :edit
+    expire_action :action => :index
   end
 
-  def edit; end
-
 end
 </ruby>
 
 You can also use +:if+ (or +:unless+) to pass a Proc that specifies when the
 action should be cached. Also, you can use +:layout => false+ to cache without
-layout so that dynamic information in the layout such as the name of the logged-in user
+layout so that dynamic information in the layout such as logged in user info
 or the number of items in the cart can be left uncached. This feature is
 available as of Rails 2.2.
 
@@ -149,7 +153,7 @@ Fragment Caching allows a fragment of view logic to be wrapped in a cache
 block and served out of the cache store when the next request comes in.
 
 As an example, if you wanted to show all the orders placed on your website
-in real time and didn't want to cache that part  of the page, but did want
+in real time and didn't want to cache that part of the page, but did want
 to cache the part of the page which lists all products available, you
 could use this piece of code:
 
@@ -160,35 +164,33 @@ could use this piece of code:
 
 <% cache do %>
   All available products:
-  <% Product.find(:all).each do |p| %>
+  <% Product.all.each do |p| %>
     <%= link_to p.name, product_url(p) %>
   <% end %>
 <% end %>
 </ruby>
 
 The cache block in our example will bind to the action that called it and is
-written out to the same place as the action cache, which means that if you
+written out to the same place as the Action Cache, which means that if you
 want to cache multiple fragments per action, you should provide an +action_suffix+ to the cache call:
 
 <ruby>
-<% cache(:action => 'recent', :action_suffix => 'all_prods') do %>
+<% cache(:action => 'recent', :action_suffix => 'all_products') do %>
   All available products:
 </ruby>
 
-You can expire the cache using the +expire_fragment+ method, like so:
+and you can expire it using the +expire_fragment+ method, like so:
 
 <ruby>
-expire_fragment(:controller => 'products', :action => 'recent', 
-  :action_suffix => 'all_prods)
+expire_fragment(:controller => 'products', :action => 'recent', :action_suffix => 'all_products')
 </ruby>
 
-If you don't want the cache block to bind to the action that called it, you can
-also use globally keyed fragments. To do this, call the +cache+ method with a key, like
+If you don't want the cache block to bind to the action that called it, You can
+also use globally keyed fragments by calling the +cache+ method with a key, like
 so:
 
 <ruby>
-<% cache(:key => 
-  ['all_available_products', @latest_product.created_at].join(':')) do %>
+<% cache('all_available_products') do %>
   All available products:
 <% end %>
 </ruby>
@@ -197,16 +199,15 @@ This fragment is then available to all actions in the +ProductsController+ using
 the key and can be expired the same way:
 
 <ruby>
-expire_fragment(:key => 
-  ['all_available_products', @latest_product.created_at].join(':'))
+expire_fragment('all_available_products')
 </ruby>
 
 h4. Sweepers
 
 Cache sweeping is a mechanism which allows you to get around having a ton of
-+expire_{page,action,fragment}+ calls in your code. It does this by moving all the work
-required to expire cached content into na +ActionController::Caching::Sweeper+
-class. This class is an Observer that looks for changes to an object via callbacks,
++expire_{page,action,fragment}+ calls in your code.  It does this by moving all the work
+required to expire cached content into a +ActionController::Caching::Sweeper+
+class.  This class is an Observer and looks for changes to an object via callbacks,
 and when a change occurs it expires the caches associated with that object in
 an around or after filter.
 
@@ -214,9 +215,8 @@ Continuing with our Product controller example, we could rewrite it with a
 sweeper like this:
 
 <ruby>
-class StoreSweeper < ActionController::Caching::Sweeper
-  # This sweeper is going to keep an eye on the Product model
-  observe Product
+class ProductSweeper < ActionController::Caching::Sweeper
+  observe Product # This sweeper is going to keep an eye on the Product model
 
   # If our sweeper detects that a Product was created call this
   def after_create(product)
@@ -234,91 +234,82 @@ class StoreSweeper < ActionController::Caching::Sweeper
   end
 
   private
-  def expire_cache_for(record)
-    # Expire the list page now that we added a new product
-    expire_page(:controller => '#{record}', :action => 'list')
+  def expire_cache_for(product)
+    # Expire the index page now that we added a new product
+    expire_page(:controller => 'products', :action => 'index')
 
     # Expire a fragment
-    expire_fragment(:controller => '#{record}', 
-      :action => 'recent', :action_suffix => 'all_products')
+    expire_fragment('all_available_products')
   end
 end
 </ruby>
 
-The sweeper has to be added to the controller that will use it. So, if we wanted to expire the cached content for the
+You may notice that the actual product gets passed to the sweeper, so if we
+were caching the edit action for each product, we could add a expire method
+which specifies the page we want to expire:
+
+<ruby>
+  expire_action(:controller => 'products', :action => 'edit', :id => product)
+</ruby>
+
+Then we add it to our controller to tell it to call the sweeper when certain
+actions are called. So, if we wanted to expire the cached content for the
 list and edit actions when the create action was called, we could do the
 following:
 
 <ruby>
 class ProductsController < ActionController
 
-  before_filter :authenticate, :only => [ :edit, :create ]
-  caches_page :list
-  caches_action :edit
-  cache_sweeper :store_sweeper, :only => [ :create ]
-
-  def list; end
+  before_filter :authenticate
+  caches_action :index
+  cache_sweeper :product_sweeper
 
-  def create
-    expire_page :action => :list
-    expire_action :action => :edit
+  def index
+    @products = Product.all
   end
 
-  def edit; end
-
 end
 </ruby>
 
 h4. SQL Caching
 
 Query caching is a Rails feature that caches the result set returned by each
-query. If Rails encounters the same query again during the current request, it
+query so that if Rails encounters the same query again for that request, it
 will used the cached result set as opposed to running the query against the
-database.
+database again.
 
 For example:
 
 <ruby>
 class ProductsController < ActionController
 
-  before_filter :authenticate, :only => [ :edit, :create ]
-  caches_page :list
-  caches_action :edit
-  cache_sweeper :store_sweeper, :only => [ :create ]
-
-  def list
+  def index
     # Run a find query
-    Product.find(:all)
+    @products = Product.all
 
     ...
 
     # Run the same query again
-    Product.find(:all)
-  end
-
-  def create
-    expire_page :action => :list
-    expire_action :action => :edit
+    @products = Product.all
   end
 
-  def edit; end
-
 end
 </ruby>
 
-In the 'list' action above, the result set returned by the first
-Product.find(:all) will be cached and will be used to avoid querying the
-database again the second time that finder is called.
+The second time the same query is run against the database, it's not actually
+going to hit the database.  The first time the result is returned from the query
+it is stored in the query cache (in memory) and the second time it's pulled from memory.
 
-Query caches are created at the start of an action and destroyed at the end of
-that action and thus persist only for the duration of the action.
+However, it's important to note that query caches are created at the start of an action and destroyed at the end of
+that action and thus persist only for the duration of the action.  If you'd like to store query results in a more
+persistent fashion, you can in Rails by using low level caching.
 
-h4. Cache Stores
+h4. Cache stores
 
 Rails (as of 2.1) provides different stores for the cached data created by action and
 fragment caches. Page caches are always stored on disk.
 
-Rails 2.1 and above provide ActiveSupport::Cache::Store which can be used to
+Rails 2.1 and above provide +ActiveSupport::Cache::Store+ which can be used to
 cache strings. Some cache store implementations, like MemoryStore, are able to
 cache arbitrary Ruby objects, but don't count on every cache store to be able
 to do that.
@@ -344,12 +335,13 @@ need thread-safety.
 ActionController::Base.cache_store = :memory_store
 </ruby>
 
-2) ActiveSupport::Cache::FileStore: Cached data is stored on the disk. This is
+2) ActiveSupport::Cache::FileStore: Cached data is stored on the disk, this is
 the default store and the default path for this store is: /tmp/cache. Works
 well for all types of environments and allows all processes running from the
 same application directory to access the cached content. If /tmp/cache does not
 exist, the default store becomes MemoryStore.
 
+
 <ruby>
 ActionController::Base.cache_store = :file_store, "/path/to/cache/directory"
 </ruby>
@@ -359,6 +351,7 @@ DRb process that all servers communicate with. This works for all environments
 and only keeps one cache around for all processes, but requires that you run
 and manage a separate DRb process.
 
+
 <ruby>
 ActionController::Base.cache_store = :drb_store, "druby://localhost:9192"
 </ruby>
@@ -368,28 +361,26 @@ Rails uses the bundled memcached-client gem by default. This is currently the
 most popular cache store for production websites.
 
 Special features:
-
-* Clustering and load balancing. One can specify multiple memcached servers,
+ * Clustering and load balancing. One can specify multiple memcached servers,
    and MemCacheStore will load balance between all available servers. If a
    server goes down, then MemCacheStore will ignore it until it goes back
    online.
-* Time-based expiry support. See +write+ and the +:expires_in+ option.
-* Per-request in memory cache for all communication with the MemCache server(s).
+ * Time-based expiry support. See +write+ and the +:expires_in+ option.
+ * Per-request in memory cache for all communication with the MemCache server(s).
 
 It also accepts a hash of additional options:
 
-* +:namespace+- specifies a string that will automatically be prepended to keys when accessing the memcached store.
-* +:readonly+- a boolean value that when set to true will make the store read-only, with an error raised on any attempt to write.
-* +:multithread+ - a boolean value that adds thread safety to read/write operations - it is unlikely you'll need to use this option as the Rails threadsafe! method offers the same functionality.
+ * +:namespace+- specifies a string that will automatically be prepended to keys when accessing the memcached store.
+ * +:readonly+- a boolean value that when set to true will make the store read-only, with an error raised on any attempt to write.
+ * +:multithread+ - a boolean value that adds thread safety to read/write operations - it is unlikely you'll need to use this option as the Rails threadsafe! method offers the same functionality.
 
 The read and write methods of the MemCacheStore accept an options hash too.
-When reading you can specify +:raw => true+ to prevent the object being
-marshaled
+When reading you can specify +:raw => true+ to prevent the object being marshaled
 (by default this is false which means the raw value in the cache is passed to
 +Marshal.load+ before being returned to you.)
 
-When writing to the cache it is also possible to specify +:raw => true+. This means
-that the value is not passed to +Marshal.dump+ before being stored in the cache (by
+When writing to the cache it is also possible to specify +:raw => true+ means
+the value is not passed to +Marshal.dump+ before being stored in the cache (by
 default this is false). 
 
 The write method also accepts an +:unless_exist+ flag which determines whether
@@ -424,15 +415,14 @@ ActionController::Base.cache_store = :compressed_mem_cache_store, "localhost"
 ActionController::Base.cache_store = MyOwnStore.new("parameter")
 </ruby>
 
-NOTE: +config.cache_store+ can be used in place of
-+ActionController::Base.cache_store+ in the +Rails::Initializer.run+ block in
-environment.rb.
++Note: +config.cache_store+ can be used in place of
++ActionController::Base.cache_store+ in your +Rails::Initializer.run+ block in
++environment.rb+
 
 In addition to all of this, Rails also adds the +ActiveRecord::Base#cache_key+
-method that generates a key using the class name, id and updated_at timestamp
-(if available).
+method that generates a key using the class name, +id+ and +updated_at+ timestamp (if available).
 
-An example:
+You can access these cache stores at a low level for storing queries and other objects. Here's an example:
 
 <ruby>
 Rails.cache.read("city")   # => nil
@@ -440,18 +430,18 @@ Rails.cache.write("city", "Duckburgh")
 Rails.cache.read("city")   # => "Duckburgh"
 </ruby>
 
-h3. Conditional GET Support
+h3. Conditional GET support
 
 Conditional GETs are a feature of the HTTP specification that provide a way for web
 servers to tell browsers that the response to a GET request hasn't changed
 since the last request and can be safely pulled from the browser cache.
 
-They work by using the HTTP_IF_NONE_MATCH and HTTP_IF_MODIFIED_SINCE headers to
-pass back and forth both a unique content identifier and the timestamp of when
-the content was last changed. If the browser makes a request where the content
-identifier (etag) or last modified since timestamp matches the server’s version
-then the server only needs to send back an empty response with a not modified
-status.
+They work by using the +HTTP_IF_NONE_MATCH+ and +HTTP_IF_MODIFIED_SINCE+ headers
+to pass back and forth both a unique content identifier and the timestamp of
+when the content was last changed. If the browser makes a request where the
+content identifier (etag) or last modified since timestamp matches the server’s
+version then the server only needs to send back an empty response with a not
+modified status.
 
 It is the server's (i.e. our) responsibility to look for a last modified
 timestamp and the if-none-match header and determine whether or not to send
@@ -509,16 +499,18 @@ Also the new "Cache money":http://github.com/nkallen/cache-money/tree/master plu
 
 h3. References
 
+* "Scaling Rails Screencasts":http://railslab.newrelic.com/scaling-rails
 * "RailsEnvy, Rails Caching Tutorial, Part 1":http://www.railsenvy.com/2007/2/28/rails-caching-tutorial
 * "RailsEnvy, Rails Caching Tutorial, Part 1":http://www.railsenvy.com/2007/3/20/ruby-on-rails-caching-tutorial-part-2
 * "ActiveSupport::Cache documentation":http://api.rubyonrails.org/classes/ActiveSupport/Cache.html
 * "Rails 2.1 integrated caching tutorial":http://thewebfellas.com/blog/2008/6/9/rails-2-1-now-with-better-integrated-caching
 
-h3. Changelog
 
+h3. Changelog
 "Lighthouse ticket":http://rails.lighthouseapp.com/projects/16213-rails-guides/tickets/10-guide-to-caching
 
-* February  22, 2009: Beefed up the section on cache_stores
-* December  27, 2008: Typo fixes
-* November  23, 2008: Incremental updates with various suggested changes and formatting cleanup
-* September 15, 2008: Initial version by Aditya Chadha
+April      1, 2009: Made a bunch of small fixes
+February  22, 2009: Beefed up the section on cache_stores
+December  27, 2008: Typo fixes
+November  23, 2008: Incremental updates with various suggested changes and formatting cleanup
+September 15, 2008: Initial version by Aditya Chadha
diff --git a/railties/guides/source/getting_started.textile b/railties/guides/source/getting_started.textile
index 97f141b5e9..a216201490 100644
--- a/railties/guides/source/getting_started.textile
+++ b/railties/guides/source/getting_started.textile
@@ -312,7 +312,7 @@ Now if you navigate to +http://localhost:3000+ in your browser, you'll see the +
 
 NOTE. For more information about routing, refer to "Rails Routing from the Outside In":routing.html.
 
-h3. Getting Up and Running Quickly With Scaffolding
+h3. Getting Up and Running Quickly with Scaffolding
 
 Rails _scaffolding_ is a quick way to generate some of the major pieces of an application. If you want to create the models, views, and controllers for a new resource in a single operation, scaffolding is the tool for the job.
 
@@ -474,7 +474,7 @@ This code sets the +@posts+ instance variable to an array of all posts in the da
 
 TIP: For more information on finding records with Active Record, see "Active Record Query Interface":active_record_querying.html.
 
-The +respond_to+ block handles both HTML and XML calls to this action. If you browse to +http://localhost:3000/posts.xml+, you'll see all of the posts in XML format. The HTML format looks for a view in +app/views/posts/+ with a name that corresponds to the action name. Rails makes all of the instance variables from the action available to the view. Here's +app/view/posts/index.html.erb+:
+The +respond_to+ block handles both HTML and XML calls to this action. If you browse to +http://localhost:3000/posts.xml+, you'll see all of the posts in XML format. The HTML format looks for a view in +app/views/posts/+ with a name that corresponds to the action name. Rails makes all of the instance variables from the action available to the view. Here's +app/views/posts/index.html.erb+:
 
 <erb>
 <h1>Listing posts</h1>
diff --git a/railties/guides/source/rails_on_rack.textile b/railties/guides/source/rails_on_rack.textile
index 07ca1624f4..05581f943f 100644
--- a/railties/guides/source/rails_on_rack.textile
+++ b/railties/guides/source/rails_on_rack.textile
@@ -9,7 +9,7 @@ This guide covers Rails integration with Rack and interfacing with other Rack co
 
 endprologue.
 
-WARNING: This guide assumes a working knowledge of Rack protocol and Rack concepts such as middlewares, url maps and Rack::Builder.
+WARNING: This guide assumes a working knowledge of Rack protocol and Rack concepts such as middlewares, url maps and +Rack::Builder+.
 
 h3. Introduction to Rack
 
@@ -51,9 +51,9 @@ app = Rack::Builder.new {
 Middlewares used in the code above are primarily useful only in the development envrionment. The following table explains their usage:
 
 |_.Middleware|_.Purpose|
-|Rails::Rack::LogTailer|Appends log file output to console|
-|Rails::Rack::Static|Serves static files inside +RAILS_ROOT/public+ directory|
-|Rails::Rack::Debugger|Starts Debugger|
+|+Rails::Rack::LogTailer+|Appends log file output to console|
+|+Rails::Rack::Static+|Serves static files inside +RAILS_ROOT/public+ directory|
+|+Rails::Rack::Debugger+|Starts Debugger|
 
 h4. +rackup+
 
@@ -109,7 +109,7 @@ use ActiveRecord::QueryCache
 run ActionController::Dispatcher.new
 </ruby>
 
-Purpose of each of this middlewares is explained in "Internal Middlewares":#internal-middleware-stack section.
+Purpose of each of this middlewares is explained in the "Internal Middlewares":#internal-middleware-stack section.
 
 h4. Configuring Middleware Stack
 
@@ -128,7 +128,7 @@ You can add a new middleware to the middleware stack using any of the following
 <strong>Example:</strong>
 
 <ruby>
-# environment.rb
+# config/environment.rb
 
 # Push Rack::BounceFavicon at the bottom
 config.middleware.use Rack::BounceFavicon
@@ -145,7 +145,7 @@ You can swap an existing middleware in the middleware stack using +config.middle
 <strong>Example:</strong>
 
 <ruby>
-# environment.rb
+# config/environment.rb
 
 # Replace ActionController::Failsafe with Lifo::Failsafe
 config.middleware.swap ActionController::Failsafe, Lifo::Failsafe
@@ -166,14 +166,14 @@ h4. Internal Middleware Stack
 Much of Action Controller's functionality is implemented as Middlewares. The following table explains the purpose of each of them:
 
 |_.Middleware|_.Purpose|
-|Rack::Lock|Sets +env["rack.multithread"]+ flag to +true+ and wraps the application within a Mutex.|
-|ActionController::Failsafe|Returns HTTP Status +500+ to the client if an exception gets raised while dispatching.|
-|ActiveRecord::QueryCache|Enable the Active Record query cache.|
-|ActionController::Session::CookieStore|Uses the cookie based session store.|
-|ActionController::Session::MemCacheStore|Uses the memcached based session store.|
-|ActiveRecord::SessionStore|Uses the database based session store.|
-|Rack::MethodOverride|Sets HTTP method based on +_method+ parameter or +env["HTTP_X_HTTP_METHOD_OVERRIDE"]+.|
-|Rack::Head|Discards the response body if the client sends a +HEAD+ request.|
+|+Rack::Lock+|Sets +env["rack.multithread"]+ flag to +true+ and wraps the application within a Mutex.|
+|+ActionController::Failsafe+|Returns HTTP Status +500+ to the client if an exception gets raised while dispatching.|
+|+ActiveRecord::QueryCache+|Enable the Active Record query cache.|
+|+ActionController::Session::CookieStore+|Uses the cookie based session store.|
+|+ActionController::Session::MemCacheStore+|Uses the memcached based session store.|
+|+ActiveRecord::SessionStore+|Uses the database based session store.|
+|+Rack::MethodOverride+|Sets HTTP method based on +_method+ parameter or +env["HTTP_X_HTTP_METHOD_OVERRIDE"]+.|
+|+Rack::Head+|Discards the response body if the client sends a +HEAD+ request.|
 
 TIP: It's possible to use any of the above middlewares in your custom Rack stack.
 
@@ -229,7 +229,7 @@ h3. Rails Metal Applications
 
 Rails Metal applications are minimal Rack applications specially designed for integrating with a typical Rails application. As Rails Metal Applications skip all of the Action Controller stack, serving a request has no overhead from the Rails framework itself. This is especially useful for infrequent cases where the performance of the full stack Rails framework is an issue.
 
-Ryan Bates' railscast on the "Rails Metal":http://railscasts.com/episodes/150-rails-metal provides a nice walkthrough generating and using Rails Metal.
+Ryan Bates' "railscast on Rails Metal":http://railscasts.com/episodes/150-rails-metal provides a nice walkthrough generating and using Rails Metal.
 
 h4. Generating a Metal Application
 
@@ -256,7 +256,7 @@ class Poller
 end
 </ruby>
 
-Metal applications within +app/metal+ folders in plugins will also be discovered and added to the list 
+Metal applications within +app/metal+ folders in plugins will also be discovered and added to the list.
 
 Metal applications are an optimization. You should make sure to "understand the related performance implications":http://weblog.rubyonrails.org/2008/12/20/performance-of-rails-metal before using it.
 
diff --git a/railties/guides/source/routing.textile b/railties/guides/source/routing.textile
index a4d9e140d5..e9adb4b308 100644
--- a/railties/guides/source/routing.textile
+++ b/railties/guides/source/routing.textile
@@ -582,7 +582,7 @@ To add a member route, use the +:member+ option:
 map.resources :photos, :member => { :preview => :get }
 </ruby>
 
-This will enable Rails to recognize URLs such as +/photos/1/preview+ using the GET HTTP verb, and route them to the preview action of the Photos controller. It will also create a +preview_photo+ route helper.
+This will enable Rails to recognize URLs such as +/photos/1/preview+ using the GET HTTP verb, and route them to the preview action of the Photos controller. It will also create the +preview_photo_url+ and +preview_photo_path+ route helpers.
 
 Within the hash of member routes, each route name specifies the HTTP verb that it will recognize. You can use +:get+, +:put+, +:post+, +:delete+, or +:any+ here. You can also specify an array of methods, if you need more than one but you don't want to allow just anything:
 
@@ -598,7 +598,7 @@ To add a collection route, use the +:collection+ option:
 map.resources :photos, :collection => { :search => :get }
 </ruby>
 
-This will enable Rails to recognize URLs such as +/photos/search+ using the GET HTTP verb, and route them to the search action of the Photos controller. It will also create a +search_photos+ route helper.
+This will enable Rails to recognize URLs such as +/photos/search+ using the GET HTTP verb, and route them to the search action of the Photos controller. It will also create the +search_photos_url+ and +search_photos_path+ route helpers.
 
 Just as with member routes, you can specify an array of methods for a collection route:
 
@@ -614,7 +614,7 @@ To add a new route (one that creates a new resource), use the +:new+ option:
 map.resources :photos, :new => { :upload => :post }
 </ruby>
 
-This will enable Rails to recognize URLs such as +/photos/upload+ using the POST HTTP verb, and route them to the upload action of the Photos controller. It will also create a +upload_photos+ route helper.
+This will enable Rails to recognize URLs such as +/photos/upload+ using the POST HTTP verb, and route them to the upload action of the Photos controller. It will also create the +upload_photos_path+ and +upload_photos_url+ route helpers.
 
 TIP: If you want to redefine the verbs accepted by one of the standard actions, you can do so by explicitly mapping that action. For example:<br/>+map.resources :photos, :new => { :new => :any }+<br/>This will allow the new action to be invoked by any request to +photos/new+, no matter what HTTP verb you use.