Merge pull request #13181 from fluxusfrequency/patch-4

Clarification, grammar fixes, punctuation, and capitalization [ci skip]

1 files changed, 603 insertions, 221 deletions

diff --git a/guides/source/engines.md b/guides/source/engines.md
index 2266b1fd7f..87b0a1ac16 100644
--- a/guides/source/engines.md
+++ b/guides/source/engines.md
@@ -1,7 +1,9 @@
 Getting Started with Engines
 ============================
 
-In this guide you will learn about engines and how they can be used to provide additional functionality to their host applications through a clean and very easy-to-use interface.
+In this guide you will learn about engines and how they can be used to provide
+additional functionality to their host applications through a clean and very
+easy-to-use interface.
 
 After reading this guide, you will know:
 
@@ -16,26 +18,59 @@ After reading this guide, you will know:
 What are engines?
 -----------------
 
-Engines can be considered miniature applications that provide functionality to their host applications. A Rails application is actually just a "supercharged" engine, with the `Rails::Application` class inheriting a lot of its behavior from `Rails::Engine`.
-
-Therefore, engines and applications can be thought of almost the same thing, just with subtle differences, as you'll see throughout this guide. Engines and applications also share a common structure.
-
-Engines are also closely related to plugins where the two share a common `lib` directory structure and are both generated using the `rails plugin new` generator. The difference being that an engine is considered a "full plugin" by Rails as indicated by the `--full` option that's passed to the generator command, but this guide will refer to them simply as "engines" throughout. An engine **can** be a plugin, and a plugin **can** be an engine.
-
-The engine that will be created in this guide will be called "blorgh". The engine will provide blogging functionality to its host applications, allowing for new posts and comments to be created. At the beginning of this guide, you will be working solely within the engine itself, but in later sections you'll see how to hook it into an application.
-
-Engines can also be isolated from their host applications. This means that an application is able to have a path provided by a routing helper such as `posts_path` and use an engine also that provides a path also called `posts_path`, and the two would not clash. Along with this, controllers, models and table names are also namespaced. You'll see how to do this later in this guide.
-
-It's important to keep in mind at all times that the application should **always** take precedence over its engines. An application is the object that has final say in what goes on in the universe (with the universe being the application's environment) where the engine should only be enhancing it, rather than changing it drastically.
-
-To see demonstrations of other engines, check out [Devise](https://github.com/plataformatec/devise), an engine that provides authentication for its parent applications, or [Forem](https://github.com/radar/forem), an engine that provides forum functionality. There's also [Spree](https://github.com/spree/spree) which provides an e-commerce platform, and [RefineryCMS](https://github.com/refinery/refinerycms), a CMS engine.
-
-Finally, engines would not have been possible without the work of James Adam, Piotr Sarnacki, the Rails Core Team, and a number of other people. If you ever meet them, don't forget to say thanks!
+Engines can be considered miniature applications that provide functionality to
+their host applications. A Rails application is actually just a "supercharged"
+engine, with the `Rails::Application` class inheriting a lot of its behavior
+from `Rails::Engine`.
+
+Therefore, engines and applications can be thought of almost the same thing,
+just with subtle differences, as you'll see throughout this guide. Engines and
+applications also share a common structure.
+
+Engines are also closely related to plugins. The two share a common `lib`
+directory structure, and are both generated using the `rails plugin new`
+generator. The difference is that an engine is considered a "full plugin" by
+Rails (as indicated by the `--full` option that's passed to the generator
+command). This guide will refer to them simply as "engines" throughout. An
+engine **can** be a plugin, and a plugin **can** be an engine.
+
+The engine that will be created in this guide will be called "blorgh". The
+engine will provide blogging functionality to its host applications, allowing
+for new posts and comments to be created. At the beginning of this guide, you
+will be working solely within the engine itself, but in later sections you'll
+see how to hook it into an application.
+
+Engines can also be isolated from their host applications. This means that an
+application is able to have a path provided by a routing helper such as
+`posts_path` and use an engine also that provides a path also called
+`posts_path`, and the two would not clash. Along with this, controllers, models
+and table names are also namespaced. You'll see how to do this later in this
+guide.
+
+It's important to keep in mind at all times that the application should
+**always** take precedence over its engines. An application is the object that
+has final say in what goes on in the universe (with the universe being the
+application's environment) where the engine should only be enhancing it, rather
+than changing it drastically.
+
+To see demonstrations of other engines, check out
+[Devise](https://github.com/plataformatec/devise), an engine that provides
+authentication for its parent applications, or
+[Forem](https://github.com/radar/forem), an engine that provides forum
+functionality. There's also [Spree](https://github.com/spree/spree) which
+provides an e-commerce platform, and
+[RefineryCMS](https://github.com/refinery/refinerycms), a CMS engine.
+
+Finally, engines would not have been possible without the work of James Adam,
+Piotr Sarnacki, the Rails Core Team, and a number of other people. If you ever
+meet them, don't forget to say thanks!
 
 Generating an engine
 --------------------
 
-To generate an engine, you will need to run the plugin generator and pass it options as appropriate to the need. For the "blorgh" example, you will need to create a "mountable" engine, running this command in a terminal:
+To generate an engine, you will need to run the plugin generator and pass it
+options as appropriate to the need. For the "blorgh" example, you will need to
+create a "mountable" engine, running this command in a terminal:
 
 ```bash
 $ rails plugin new blorgh --mountable
@@ -47,7 +82,8 @@ The full list of options for the plugin generator may be seen by typing:
 $ rails plugin --help
 ```
 
-The `--full` option tells the generator that you want to create an engine, including a skeleton structure by providing the following:
+The `--full` option tells the generator that you want to create an engine,
+including a skeleton structure that provides the following:
 
   * An `app` directory tree
   * A `config/routes.rb` file:
@@ -56,7 +92,9 @@ The `--full` option tells the generator that you want to create an engine, inclu
     Rails.application.routes.draw do
     end
     ```
-  * A file at `lib/blorgh/engine.rb` which is identical in function to a standard Rails application's `config/application.rb` file:
+
+  * A file at `lib/blorgh/engine.rb`, which is identical in function to a
+  * standard Rails application's `config/application.rb` file:
 
     ```ruby
     module Blorgh
@@ -65,7 +103,9 @@ The `--full` option tells the generator that you want to create an engine, inclu
     end
     ```
 
-The `--mountable` option tells the generator that you want to create a "mountable" and namespace-isolated engine. This generator will provide the same skeleton structure as would the `--full` option, and will add:
+The `--mountable` option tells the generator that you want to create a
+"mountable" and namespace-isolated engine. This generator will provide the same
+skeleton structure as would the `--full` option, and will add:
 
   * Asset manifest files (`application.js` and `application.css`)
   * A namespaced `ApplicationController` stub
@@ -88,23 +128,32 @@ The `--mountable` option tells the generator that you want to create a "mountabl
     end
     ```
 
-Additionally, the `--mountable` option tells the generator to mount the engine inside the dummy testing application located at `test/dummy` by adding the following to the dummy application's routes file at `test/dummy/config/routes.rb`:
+Additionally, the `--mountable` option tells the generator to mount the engine
+inside the dummy testing application located at `test/dummy` by adding the
+following to the dummy application's routes file at
+`test/dummy/config/routes.rb`:
 
 ```ruby
 mount Blorgh::Engine, at: "blorgh"
 ```
 
-### Inside an engine
+### Inside an Engine
 
-#### Critical files
+#### Critical Files
 
-At the root of this brand new engine's directory lives a `blorgh.gemspec` file. When you include the engine into an application later on, you will do so with this line in the Rails application's `Gemfile`:
+At the root of this brand new engine's directory lives a `blorgh.gemspec` file.
+When you include the engine into an application later on, you will do so with
+this line in the Rails application's `Gemfile`:
 
 ```ruby
 gem 'blorgh', path: "vendor/engines/blorgh"
 ```
 
-Don't forget to run `bundle install` as usual. By specifying it as a gem within the `Gemfile`, Bundler will load it as such, parsing this `blorgh.gemspec` file and requiring a file within the `lib` directory called `lib/blorgh.rb`. This file requires the `blorgh/engine.rb` file (located at `lib/blorgh/engine.rb`) and defines a base module called `Blorgh`.
+Don't forget to run `bundle install` as usual. By specifying it as a gem within
+the `Gemfile`, Bundler will load it as such, parsing this `blorgh.gemspec` file
+and requiring a file within the `lib` directory called `lib/blorgh.rb`. This
+file requires the `blorgh/engine.rb` file (located at `lib/blorgh/engine.rb`)
+and defines a base module called `Blorgh`.
 
 ```ruby
 require "blorgh/engine"
@@ -113,7 +162,10 @@ module Blorgh
 end
 ```
 
-TIP: Some engines choose to use this file to put global configuration options for their engine. It's a relatively good idea, and so if you want to offer configuration options, the file where your engine's `module` is defined is perfect for that. Place the methods inside the module and you'll be good to go.
+TIP: Some engines choose to use this file to put global configuration options
+for their engine. It's a relatively good idea, so if you want to offer
+configuration options, the file where your engine's `module` is defined is
+perfect for that. Place the methods inside the module and you'll be good to go.
 
 Within `lib/blorgh/engine.rb` is the base class for the engine:
 
@@ -125,43 +177,94 @@ module Blorgh
 end
 ```
 
-By inheriting from the `Rails::Engine` class, this gem notifies Rails that there's an engine at the specified path, and will correctly mount the engine inside the application, performing tasks such as adding the `app` directory of the engine to the load path for models, mailers, controllers and views.
-
-The `isolate_namespace` method here deserves special notice. This call is responsible for isolating the controllers, models, routes and other things into their own namespace, away from similar components inside the application. Without this, there is a possibility that the engine's components could "leak" into the application, causing unwanted disruption, or that important engine components could be overridden by similarly named things within the application. One of the examples of such conflicts are helpers. Without calling `isolate_namespace`, engine's helpers would be included in an application's controllers.
-
-NOTE: It is **highly** recommended that the `isolate_namespace` line be left within the `Engine` class definition. Without it, classes generated in an engine **may** conflict with an application.
-
-What this isolation of the namespace means is that a model generated by a call to `rails g model` such as `rails g model post` won't be called `Post`, but instead be namespaced and called `Blorgh::Post`. In addition, the table for the model is namespaced, becoming `blorgh_posts`, rather than simply `posts`. Similar to the model namespacing, a controller called `PostsController` becomes `Blorgh::PostsController` and the views for that controller will not be at `app/views/posts`, but `app/views/blorgh/posts` instead. Mailers are namespaced as well.
-
-Finally, routes will also be isolated within the engine. This is one of the most important parts about namespacing, and is discussed later in the [Routes](#routes) section of this guide.
-
-#### `app` directory
-
-Inside the `app` directory are the standard `assets`, `controllers`, `helpers`, `mailers`, `models` and `views` directories that you should be familiar with from an application. The `helpers`, `mailers` and `models` directories are empty and so aren't described in this section. We'll look more into models in a future section, when we're writing the engine.
-
-Within the `app/assets` directory, there are the `images`, `javascripts` and `stylesheets` directories which, again, you should be familiar with due to their similarity to an application. One difference here however is that each directory contains a sub-directory with the engine name. Because this engine is going to be namespaced, its assets should be too.
-
-Within the `app/controllers` directory there is a `blorgh` directory and inside that a file called `application_controller.rb`. This file will provide any common functionality for the controllers of the engine. The `blorgh` directory is where the other controllers for the engine will go. By placing them within this namespaced directory, you prevent them from possibly clashing with identically-named controllers within other engines or even within the application.
-
-NOTE: The `ApplicationController` class inside an engine is named just like a Rails application in order to make it easier for you to convert your applications into engines.
-
-Lastly, the `app/views` directory contains a `layouts` folder which contains a file at `blorgh/application.html.erb` which allows you to specify a layout for the engine. If this engine is to be used as a stand-alone engine, then you would add any customization to its layout in this file, rather than the application's `app/views/layouts/application.html.erb` file.
-
-If you don't want to force a layout on to users of the engine, then you can delete this file and reference a different layout in the controllers of your engine.
-
-#### `bin` directory
-
-This directory contains one file, `bin/rails`, which enables you to use the `rails` sub-commands and generators just like you would within an application. This means that you will very easily be able to generate new controllers and models for this engine by running commands like this:
+By inheriting from the `Rails::Engine` class, this gem notifies Rails that
+there's an engine at the specified path, and will correctly mount the engine
+inside the application, performing tasks such as adding the `app` directory of
+the engine to the load path for models, mailers, controllers and views.
+
+The `isolate_namespace` method here deserves special notice. This call is
+responsible for isolating the controllers, models, routes and other things into
+their own namespace, away from similar components inside the application.
+Without this, there is a possibility that the engine's components could "leak"
+into the application, causing unwanted disruption, or that important engine
+components could be overridden by similarly named things within the application.
+One of the examples of such conflicts is helpers. Without calling
+`isolate_namespace`, the engine's helpers would be included in an application's
+controllers.
+
+NOTE: It is **highly** recommended that the `isolate_namespace` line be left
+within the `Engine` class definition. Without it, classes generated in an engine
+**may** conflict with an application.
+
+What this isolation of the namespace means is that a model generated by a call
+to `rails g model`, such as `rails g model post`, won't be called `Post`, but
+instead be namespaced and called `Blorgh::Post`. In addition, the table for the
+model is namespaced, becoming `blorgh_posts`, rather than simply `posts`.
+Similar to the model namespacing, a controller called `PostsController` becomes
+`Blorgh::PostsController` and the views for that controller will not be at
+`app/views/posts`, but `app/views/blorgh/posts` instead. Mailers are namespaced
+as well.
+
+Finally, routes will also be isolated within the engine. This is one of the most
+important parts about namespacing, and is discussed later in the
+[Routes](#routes) section of this guide.
+
+#### `app` Directory
+
+Inside the `app` directory are the standard `assets`, `controllers`, `helpers`,
+`mailers`, `models` and `views` directories that you should be familiar with
+from an application. The `helpers`, `mailers` and `models` directories are
+empty, so they aren't described in this section. We'll look more into models in
+a future section, when we're writing the engine.
+
+Within the `app/assets` directory, there are the `images`, `javascripts` and
+`stylesheets` directories which, again, you should be familiar with due to their
+similarity to an application. One difference here, however, is that each
+directory contains a sub-directory with the engine name. Because this engine is
+going to be namespaced, its assets should be too.
+
+Within the `app/controllers` directory there is a `blorgh` directory that
+contains a file called `application_controller.rb`. This file will provide any
+common functionality for the controllers of the engine. The `blorgh` directory
+is where the other controllers for the engine will go. By placing them within
+this namespaced directory, you prevent them from possibly clashing with
+identically-named controllers within other engines or even within the
+application.
+
+NOTE: The `ApplicationController` class inside an engine is named just like a
+Rails application in order to make it easier for you to convert your
+applications into engines.
+
+Lastly, the `app/views` directory contains a `layouts` folder, which contains a
+file at `blorgh/application.html.erb`. This file allows you to specify a layout
+for the engine. If this engine is to be used as a stand-alone engine, then you
+would add any customization to its layout in this file, rather than the
+application's `app/views/layouts/application.html.erb` file.
+
+If you don't want to force a layout on to users of the engine, then you can
+delete this file and reference a different layout in the controllers of your
+engine.
+
+#### `bin` Directory
+
+This directory contains one file, `bin/rails`, which enables you to use the
+`rails` sub-commands and generators just like you would within an application.
+This means that you will be able to generate new controllers and models for this
+engine very easily by running commands like this:
 
 ```bash
 rails g model
 ```
 
-Keeping in mind, of course, that anything generated with these commands inside an engine that has `isolate_namespace` inside the `Engine` class will be namespaced.
+Keep in mind, of course, that anything generated with these commands inside of
+an engine that has `isolate_namespace` in the `Engine` class will be namespaced.
 
-#### `test` directory
+#### `test` Directory
 
-The `test` directory is where tests for the engine will go. To test the engine, there is a cut-down version of a Rails application embedded within it at `test/dummy`. This application will mount the engine in the `test/dummy/config/routes.rb` file:
+The `test` directory is where tests for the engine will go. To test the engine,
+there is a cut-down version of a Rails application embedded within it at
+`test/dummy`. This application will mount the engine in the
+`test/dummy/config/routes.rb` file:
 
 ```ruby
 Rails.application.routes.draw do
@@ -169,18 +272,25 @@ Rails.application.routes.draw do
 end
 ```
 
-This line mounts the engine at the path `/blorgh`, which will make it accessible through the application only at that path.
+This line mounts the engine at the path `/blorgh`, which will make it accessible
+through the application only at that path.
 
-In the test directory there is the `test/integration` directory, where integration tests for the engine should be placed. Other directories can be created in the `test` directory as well. For example, you may wish to create a `test/models` directory for your models tests.
+Inside the test directory there is the `test/integration` directory, where
+integration tests for the engine should be placed. Other directories can be
+created in the `test` directory as well. For example, you may wish to create a
+`test/models` directory for your model tests.
 
 Providing engine functionality
 ------------------------------
 
-The engine that this guide covers provides posting and commenting functionality and follows a similar thread to the [Getting Started Guide](getting_started.html), with some new twists.
+The engine that this guide covers provides posting and commenting functionality
+and follows a similar thread to the [Getting Started
+Guide](getting_started.html), with some new twists.
 
-### Generating a post resource
+### Generating a Post Resource
 
-The first thing to generate for a blog engine is the `Post` model and related controller. To quickly generate this, you can use the Rails scaffold generator.
+The first thing to generate for a blog engine is the `Post` model and related
+controller. To quickly generate this, you can use the Rails scaffold generator.
 
 ```bash
 $ rails generate scaffold post title:string text:text
@@ -195,7 +305,8 @@ create    app/models/blorgh/post.rb
 invoke    test_unit
 create      test/models/blorgh/post_test.rb
 create      test/fixtures/blorgh/posts.yml
- route  resources :posts
+invoke  resource_route
+ route    resources :posts
 invoke  scaffold_controller
 create    app/controllers/blorgh/posts_controller.rb
 invoke    erb
@@ -220,11 +331,22 @@ invoke  css
 create    app/assets/stylesheets/scaffold.css
 ```
 
-The first thing that the scaffold generator does is invoke the `active_record` generator, which generates a migration and a model for the resource. Note here, however, that the migration is called `create_blorgh_posts` rather than the usual `create_posts`. This is due to the `isolate_namespace` method called in the `Blorgh::Engine` class's definition. The model here is also namespaced, being placed at `app/models/blorgh/post.rb` rather than `app/models/post.rb` due to the `isolate_namespace` call within the `Engine` class.
+The first thing that the scaffold generator does is invoke the `active_record`
+generator, which generates a migration and a model for the resource. Note here,
+however, that the migration is called `create_blorgh_posts` rather than the
+usual `create_posts`. This is due to the `isolate_namespace` method called in
+the `Blorgh::Engine` class's definition. The model here is also namespaced,
+being placed at `app/models/blorgh/post.rb` rather than `app/models/post.rb` due
+to the `isolate_namespace` call within the `Engine` class.
 
-Next, the `test_unit` generator is invoked for this model, generating a model test at `test/models/blorgh/post_test.rb` (rather than `test/models/post_test.rb`) and a fixture at `test/fixtures/blorgh/posts.yml` (rather than `test/fixtures/posts.yml`).
+Next, the `test_unit` generator is invoked for this model, generating a model
+test at `test/models/blorgh/post_test.rb` (rather than
+`test/models/post_test.rb`) and a fixture at `test/fixtures/blorgh/posts.yml`
+(rather than `test/fixtures/posts.yml`).
 
-After that, a line for the resource is inserted into the `config/routes.rb` file for the engine. This line is simply `resources :posts`, turning the `config/routes.rb` file for the engine into this:
+After that, a line for the resource is inserted into the `config/routes.rb` file
+for the engine. This line is simply `resources :posts`, turning the
+`config/routes.rb` file for the engine into this:
 
 ```ruby
 Blorgh::Engine.routes.draw do
@@ -232,12 +354,22 @@ Blorgh::Engine.routes.draw do
 end
 ```
 
-Note here that the routes are drawn upon the `Blorgh::Engine` object rather than the `YourApp::Application` class. This is so that the engine routes are confined to the engine itself and can be mounted at a specific point as shown in the [test directory](#test-directory) section. It also causes the engine's routes to be isolated from those routes that are within the application. The [Routes](#routes) section of
-this guide describes it in details.
+Note here that the routes are drawn upon the `Blorgh::Engine` object rather than
+the `YourApp::Application` class. This is so that the engine routes are confined
+to the engine itself and can be mounted at a specific point as shown in the
+[test directory](#test-directory) section. It also causes the engine's routes to
+be isolated from those routes that are within the application. The
+[Routes](#routes) section of this guide describes it in detail.
 
-Next, the `scaffold_controller` generator is invoked, generating a controller called `Blorgh::PostsController` (at `app/controllers/blorgh/posts_controller.rb`) and its related views at `app/views/blorgh/posts`. This generator also generates a test for the controller (`test/controllers/blorgh/posts_controller_test.rb`) and a helper (`app/helpers/blorgh/posts_controller.rb`).
+Next, the `scaffold_controller` generator is invoked, generating a controller
+called `Blorgh::PostsController` (at
+`app/controllers/blorgh/posts_controller.rb`) and its related views at
+`app/views/blorgh/posts`. This generator also generates a test for the
+controller (`test/controllers/blorgh/posts_controller_test.rb`) and a helper
+(`app/helpers/blorgh/posts_controller.rb`).
 
-Everything this generator has created is neatly namespaced. The controller's class is defined within the `Blorgh` module:
+Everything this generator has created is neatly namespaced. The controller's
+class is defined within the `Blorgh` module:
 
 ```ruby
 module Blorgh
@@ -247,7 +379,8 @@ module Blorgh
 end
 ```
 
-NOTE: The `ApplicationController` class being inherited from here is the `Blorgh::ApplicationController`, not an application's `ApplicationController`.
+NOTE: The `ApplicationController` class being inherited from here is the
+`Blorgh::ApplicationController`, not an application's `ApplicationController`.
 
 The helper inside `app/helpers/blorgh/posts_helper.rb` is also namespaced:
 
@@ -259,38 +392,63 @@ module Blorgh
 end
 ```
 
-This helps prevent conflicts with any other engine or application that may have a post resource as well.
+This helps prevent conflicts with any other engine or application that may have
+a post resource as well.
 
-Finally, two files that are the assets for this resource are generated, `app/assets/javascripts/blorgh/posts.js` and `app/assets/stylesheets/blorgh/posts.css`. You'll see how to use these a little later.
+Finally, the assets for this resource are generated in two files:
+`app/assets/javascripts/blorgh/posts.js` and
+`app/assets/stylesheets/blorgh/posts.css`. You'll see how to use these a little
+later.
 
-By default, the scaffold styling is not applied to the engine as the engine's layout file, `app/views/layouts/blorgh/application.html.erb` doesn't load it. To make this apply, insert this line into the `<head>` tag of this layout:
+By default, the scaffold styling is not applied to the engine because the
+engine's layout file, `app/views/layouts/blorgh/application.html.erb`, doesn't
+load it. To make the scaffold styling apply, insert this line into the `<head>`
+tag of this layout:
 
 ```erb
 <%= stylesheet_link_tag "scaffold" %>
 ```
 
-You can see what the engine has so far by running `rake db:migrate` at the root of our engine to run the migration generated by the scaffold generator, and then running `rails server` in `test/dummy`. When you open `http://localhost:3000/blorgh/posts` you will see the default scaffold that has been generated. Click around! You've just generated your first engine's first functions.
+You can see what the engine has so far by running `rake db:migrate` at the root
+of our engine to run the migration generated by the scaffold generator, and then
+running `rails server` in `test/dummy`. When you open
+`http://localhost:3000/blorgh/posts` you will see the default scaffold that has
+been generated. Click around! You've just generated your first engine's first
+functions.
 
-If you'd rather play around in the console, `rails console` will also work just like a Rails application. Remember: the `Post` model is namespaced, so to reference it you must call it as `Blorgh::Post`.
+If you'd rather play around in the console, `rails console` will also work just
+like a Rails application. Remember: the `Post` model is namespaced, so to
+reference it you must call it as `Blorgh::Post`.
 
 ```ruby
 >> Blorgh::Post.find(1)
 => #<Blorgh::Post id: 1 ...>
 ```
 
-One final thing is that the `posts` resource for this engine should be the root of the engine. Whenever someone goes to the root path where the engine is mounted, they should be shown a list of posts. This can be made to happen if this line is inserted into the `config/routes.rb` file inside the engine:
+One final thing is that the `posts` resource for this engine should be the root
+of the engine. Whenever someone goes to the root path where the engine is
+mounted, they should be shown a list of posts. This can be made to happen if
+this line is inserted into the `config/routes.rb` file inside the engine:
 
 ```ruby
 root to: "posts#index"
 ```
 
-Now people will only need to go to the root of the engine to see all the posts, rather than visiting `/posts`. This means that instead of `http://localhost:3000/blorgh/posts`, you only need to go to `http://localhost:3000/blorgh` now.
+Now people will only need to go to the root of the engine to see all the posts,
+rather than visiting `/posts`. This means that instead of
+`http://localhost:3000/blorgh/posts`, you only need to go to
+`http://localhost:3000/blorgh` now.
 
-### Generating a comments resource
+### Generating a Comments Resource
 
-Now that the engine can create new blog posts, it only makes sense to add commenting functionality as well. To do this, you'll need to generate a comment model, a comment controller and then modify the posts scaffold to display comments and allow people to create new ones.
+Now that the engine can create new blog posts, it only makes sense to add
+commenting functionality as well. To do this, you'll need to generate a comment
+model, a comment controller and then modify the posts scaffold to display
+comments and allow people to create new ones.
 
-Run the model generator and tell it to generate a `Comment` model, with the related table having two columns: a `post_id` integer and `text` text column.
+From the application root, run the model generator. Tell it to generate a
+`Comment` model, with the related table having two columns: a `post_id` integer
+and `text` text column.
 
 ```bash
 $ rails generate model Comment post_id:integer text:text
@@ -307,20 +465,26 @@ create      test/models/blorgh/comment_test.rb
 create      test/fixtures/blorgh/comments.yml
 ```
 
-This generator call will generate just the necessary model files it needs, namespacing the files under a `blorgh` directory and creating a model class called `Blorgh::Comment`. Now run the migration to create our blorgh_comments table:
+This generator call will generate just the necessary model files it needs,
+namespacing the files under a `blorgh` directory and creating a model class
+called `Blorgh::Comment`. Now run the migration to create our blorgh_comments
+table:
 
 ```bash
 $ rake db:migrate
 ```
 
-To show the comments on a post, edit `app/views/blorgh/posts/show.html.erb` and add this line before the "Edit" link:
+To show the comments on a post, edit `app/views/blorgh/posts/show.html.erb` and
+add this line before the "Edit" link:
 
 ```html+erb
 <h3>Comments</h3>
 <%= render @post.comments %>
 ```
 
-This line will require there to be a `has_many` association for comments defined on the `Blorgh::Post` model, which there isn't right now. To define one, open `app/models/blorgh/post.rb` and add this line into the model:
+This line will require there to be a `has_many` association for comments defined
+on the `Blorgh::Post` model, which there isn't right now. To define one, open
+`app/models/blorgh/post.rb` and add this line into the model:
 
 ```ruby
 has_many :comments
@@ -336,15 +500,22 @@ module Blorgh
 end
 ```
 
-NOTE: Because the `has_many` is defined inside a class that is inside the `Blorgh` module, Rails will know that you want to use the `Blorgh::Comment` model for these objects, so there's no need to specify that using the `:class_name` option here.
+NOTE: Because the `has_many` is defined inside a class that is inside the
+`Blorgh` module, Rails will know that you want to use the `Blorgh::Comment`
+model for these objects, so there's no need to specify that using the
+`:class_name` option here.
 
-Next, there needs to be a form so that comments can be created on a post. To add this, put this line underneath the call to `render @post.comments` in `app/views/blorgh/posts/show.html.erb`:
+Next, there needs to be a form so that comments can be created on a post. To add
+this, put this line underneath the call to `render @post.comments` in
+`app/views/blorgh/posts/show.html.erb`:
 
 ```erb
 <%= render "blorgh/comments/form" %>
 ```
 
-Next, the partial that this line will render needs to exist. Create a new directory at `app/views/blorgh/comments` and in it a new file called `_form.html.erb` which has this content to create the required partial:
+Next, the partial that this line will render needs to exist. Create a new
+directory at `app/views/blorgh/comments` and in it a new file called
+`_form.html.erb` which has this content to create the required partial:
 
 ```html+erb
 <h3>New comment</h3>
@@ -357,7 +528,10 @@ Next, the partial that this line will render needs to exist. Create a new direct
 <% end %>
 ```
 
-When this form is submitted, it is going to attempt to perform a `POST` request to a route of `/posts/:post_id/comments` within the engine. This route doesn't exist at the moment, but can be created by changing the `resources :posts` line inside `config/routes.rb` into these lines:
+When this form is submitted, it is going to attempt to perform a `POST` request
+to a route of `/posts/:post_id/comments` within the engine. This route doesn't
+exist at the moment, but can be created by changing the `resources :posts` line
+inside `config/routes.rb` into these lines:
 
 ```ruby
 resources :posts do
@@ -367,7 +541,8 @@ end
 
 This creates a nested route for the comments, which is what the form requires.
 
-The route now exists, but the controller that this route goes to does not. To create it, run this command:
+The route now exists, but the controller that this route goes to does not. To
+create it, run this command from the application root:
 
 ```bash
 $ rails g controller comments
@@ -392,7 +567,10 @@ invoke    css
 create      app/assets/stylesheets/blorgh/comments.css
 ```
 
-The form will be making a `POST` request to `/posts/:post_id/comments`, which will correspond with the `create` action in `Blorgh::CommentsController`. This action needs to be created and can be done by putting the following lines inside the class definition in `app/controllers/blorgh/comments_controller.rb`:
+The form will be making a `POST` request to `/posts/:post_id/comments`, which
+will correspond with the `create` action in `Blorgh::CommentsController`. This
+action needs to be created, which can be done by putting the following lines
+inside the class definition in `app/controllers/blorgh/comments_controller.rb`:
 
 ```ruby
 def create
@@ -408,119 +586,182 @@ private
   end
 ```
 
-This is the final part required to get the new comment form working. Displaying the comments however, is not quite right yet. If you were to create a comment right now you would see this error:
+This is the final step required to get the new comment form working. Displaying
+the comments, however, is not quite right yet. If you were to create a comment
+right now, you would see this error:
 
-```
-Missing partial blorgh/comments/comment with {:handlers=>[:erb, :builder], :formats=>[:html], :locale=>[:en, :en]}. Searched in:
-  * "/Users/ryan/Sites/side_projects/blorgh/test/dummy/app/views"
-  * "/Users/ryan/Sites/side_projects/blorgh/app/views"
+``` 
+Missing partial blorgh/comments/comment with {:handlers=>[:erb, :builder],
+:formats=>[:html], :locale=>[:en, :en]}. Searched in:   *
+"/Users/ryan/Sites/side_projects/blorgh/test/dummy/app/views"   *
+"/Users/ryan/Sites/side_projects/blorgh/app/views" 
 ```
 
-The engine is unable to find the partial required for rendering the comments. Rails looks first in the application's (`test/dummy`) `app/views` directory and then in the engine's `app/views` directory. When it can't find it, it will throw this error. The engine knows to look for `blorgh/comments/comment` because the model object it is receiving is from the `Blorgh::Comment` class.
+The engine is unable to find the partial required for rendering the comments.
+Rails looks first in the application's (`test/dummy`) `app/views` directory and
+then in the engine's `app/views` directory. When it can't find it, it will throw
+this error. The engine knows to look for `blorgh/comments/comment` because the
+model object it is receiving is from the `Blorgh::Comment` class.
 
-This partial will be responsible for rendering just the comment text, for now. Create a new file at `app/views/blorgh/comments/_comment.html.erb` and put this line inside it:
+This partial will be responsible for rendering just the comment text, for now.
+Create a new file at `app/views/blorgh/comments/_comment.html.erb` and put this
+line inside it:
 
 ```erb
 <%= comment_counter + 1 %>. <%= comment.text %>
 ```
 
-The `comment_counter` local variable is given to us by the `<%= render @post.comments %>` call, as it will define this automatically and increment the counter as it iterates through each comment. It's used in this example to display a small number next to each comment when it's created.
+The `comment_counter` local variable is given to us by the `<%= render
+@post.comments %>` call, which will define it automatically and increment the
+counter as it iterates through each comment. It's used in this example to
+display a small number next to each comment when it's created.
 
-That completes the comment function of the blogging engine. Now it's time to use it within an application.
+That completes the comment function of the blogging engine. Now it's time to use
+it within an application.
 
-Hooking into an application
+Hooking Into an Application
 ---------------------------
 
-Using an engine within an application is very easy. This section covers how to mount the engine into an application and the initial setup required, as well as linking the engine to a `User` class provided by the application to provide ownership for posts and comments within the engine.
+Using an engine within an application is very easy. This section covers how to
+mount the engine into an application and the initial setup required, as well as
+linking the engine to a `User` class provided by the application to provide
+ownership for posts and comments within the engine.
 
-### Mounting the engine
+### Mounting the Engine
 
-First, the engine needs to be specified inside the application's `Gemfile`. If there isn't an application handy to test this out in, generate one using the `rails new` command outside of the engine directory like this:
+First, the engine needs to be specified inside the application's `Gemfile`. If
+there isn't an application handy to test this out in, generate one using the
+`rails new` command outside of the engine directory like this:
 
 ```bash
 $ rails new unicorn
 ```
 
-Usually, specifying the engine inside the Gemfile would be done by specifying it as a normal, everyday gem.
+Usually, specifying the engine inside the Gemfile would be done by specifying it
+as a normal, everyday gem.
 
 ```ruby
 gem 'devise'
 ```
 
-However, because you are developing the `blorgh` engine on your local machine, you will need to specify the `:path` option in your `Gemfile`:
+However, because you are developing the `blorgh` engine on your local machine,
+you will need to specify the `:path` option in your `Gemfile`:
 
 ```ruby
 gem 'blorgh', path: "/path/to/blorgh"
 ```
 
-As described earlier, by placing the gem in the `Gemfile` it will be loaded when Rails is loaded, as it will first require `lib/blorgh.rb` in the engine and then `lib/blorgh/engine.rb`, which is the file that defines the major pieces of functionality for the engine.
+Then run `bundle` to install the gem.
 
-To make the engine's functionality accessible from within an application, it needs to be mounted in that application's `config/routes.rb` file:
+As described earlier, by placing the gem in the `Gemfile` it will be loaded when
+Rails is loaded. It will first require `lib/blorgh.rb` from the engine, then
+`lib/blorgh/engine.rb`, which is the file that defines the major pieces of
+functionality for the engine.
+
+To make the engine's functionality accessible from within an application, it
+needs to be mounted in that application's `config/routes.rb` file:
 
 ```ruby
 mount Blorgh::Engine, at: "/blog"
 ```
 
-This line will mount the engine at `/blog` in the application. Making it accessible at `http://localhost:3000/blog` when the application runs with `rails server`.
+This line will mount the engine at `/blog` in the application. Making it
+accessible at `http://localhost:3000/blog` when the application runs with `rails
+server`.
 
-NOTE: Other engines, such as Devise, handle this a little differently by making you specify custom helpers such as `devise_for` in the routes. These helpers do exactly the same thing, mounting pieces of the engines's functionality at a pre-defined path which may be customizable.
+NOTE: Other engines, such as Devise, handle this a little differently by making
+you specify custom helpers (such as `devise_for`) in the routes. These helpers
+do exactly the same thing, mounting pieces of the engines's functionality at a
+pre-defined path which may be customizable.
 
 ### Engine setup
 
-The engine contains migrations for the `blorgh_posts` and `blorgh_comments` table which need to be created in the application's database so that the engine's models can query them correctly. To copy these migrations into the application use this command:
+The engine contains migrations for the `blorgh_posts` and `blorgh_comments`
+table which need to be created in the application's database so that the
+engine's models can query them correctly. To copy these migrations into the
+application use this command:
 
 ```bash
 $ rake blorgh:install:migrations
 ```
 
-If you have multiple engines that need migrations copied over, use `railties:install:migrations` instead:
+If you have multiple engines that need migrations copied over, use
+`railties:install:migrations` instead:
 
 ```bash
 $ rake railties:install:migrations
 ```
 
-This command, when run for the first time, will copy over all the migrations from the engine. When run the next time, it will only copy over migrations that haven't been copied over already. The first run for this command will output something such as this:
+This command, when run for the first time, will copy over all the migrations
+from the engine. When run the next time, it will only copy over migrations that
+haven't been copied over already. The first run for this command will output
+something such as this:
 
 ```bash
 Copied migration [timestamp_1]_create_blorgh_posts.rb from blorgh
 Copied migration [timestamp_2]_create_blorgh_comments.rb from blorgh
 ```
 
-The first timestamp (`[timestamp_1]`) will be the current time and the second timestamp (`[timestamp_2]`) will be the current time plus a second. The reason for this is so that the migrations for the engine are run after any existing migrations in the application.
+The first timestamp (`[timestamp_1]`) will be the current time, and the second
+timestamp (`[timestamp_2]`) will be the current time plus a second. The reason
+for this is so that the migrations for the engine are run after any existing
+migrations in the application.
 
-To run these migrations within the context of the application, simply run `rake db:migrate`. When accessing the engine through `http://localhost:3000/blog`, the posts will be empty. This is because the table created inside the application is different from the one created within the engine. Go ahead, play around with the newly mounted engine. You'll find that it's the same as when it was only an engine.
+To run these migrations within the context of the application, simply run `rake
+db:migrate`. When accessing the engine through `http://localhost:3000/blog`, the
+posts will be empty. This is because the table created inside the application is
+different from the one created within the engine. Go ahead, play around with the
+newly mounted engine. You'll find that it's the same as when it was only an
+engine.
 
-If you would like to run migrations only from one engine, you can do it by specifying `SCOPE`:
+If you would like to run migrations only from one engine, you can do it by
+specifying `SCOPE`:
 
 ```bash
 rake db:migrate SCOPE=blorgh
 ```
 
-This may be useful if you want to revert engine's migrations before removing it. In order to revert all migrations from blorgh engine you can run such code:
+This may be useful if you want to revert engine's migrations before removing it.
+To revert all migrations from blorgh engine you can run code such as:
 
 ```bash
 rake db:migrate SCOPE=blorgh VERSION=0
 ```
 
-### Using a class provided by the application
+### Using a Class Provided by the Application
 
-#### Using a model provided by the application
+#### Using a Model Provided by the Application
 
-When an engine is created, it may want to use specific classes from an application to provide links between the pieces of the engine and the pieces of the application. In the case of the `blorgh` engine, making posts and comments have authors would make a lot of sense.
+When an engine is created, it may want to use specific classes from an
+application to provide links between the pieces of the engine and the pieces of
+the application. In the case of the `blorgh` engine, making posts and comments
+have authors would make a lot of sense.
 
-A typical application might have a `User` class that would be used to represent authors for a post or a comment. But there could be a case where the application calls this class something different, such as `Person`. For this reason, the engine should not hardcode associations specifically for a `User` class.
+A typical application might have a `User` class that would be used to represent
+authors for a post or a comment. But there could be a case where the application
+calls this class something different, such as `Person`. For this reason, the
+engine should not hardcode associations specifically for a `User` class.
 
-To keep it simple in this case, the application will have a class called `User` which will represent the users of the application. It can be generated using this command inside the application:
+To keep it simple in this case, the application will have a class called `User`
+that represents the users of the application. It can be generated using this
+command inside the application:
 
 ```bash
 rails g model user name:string
 ```
 
-The `rake db:migrate` command needs to be run here to ensure that our application has the `users` table for future use.
+The `rake db:migrate` command needs to be run here to ensure that our
+application has the `users` table for future use.
 
-Also, to keep it simple, the posts form will have a new text field called `author_name` where users can elect to put their name. The engine will then take this name and create a new `User` object from it or find one that already has that name, and then associate the post with it.
+Also, to keep it simple, the posts form will have a new text field called
+`author_name`, where users can elect to put their name. The engine will then
+take this name and either create a new `User` object from it, or find one that
+already has that name. The engine will then associate the post with the found or
+created `User` object.
 
-First, the `author_name` text field needs to be added to the `app/views/blorgh/posts/_form.html.erb` partial inside the engine. This can be added above the `title` field with this code:
+First, the `author_name` text field needs to be added to the
+`app/views/blorgh/posts/_form.html.erb` partial inside the engine. This can be
+added above the `title` field with this code:
 
 ```html+erb
 <div class="field">
@@ -529,7 +770,8 @@ First, the `author_name` text field needs to be added to the `app/views/blorgh/p
 </div>
 ```
 
-Next, we need to update our `Blorgh::PostController#post_params` method to permit the new form parameter:
+Next, we need to update our `Blorgh::PostController#post_params` method to
+permit the new form parameter:
 
 ```ruby
 def post_params
@@ -537,9 +779,15 @@ def post_params
 end
 ```
 
-The `Blorgh::Post` model should then have some code to convert the `author_name` field into an actual `User` object and associate it as that post's `author` before the post is saved. It will also need to have an `attr_accessor` setup for this field so that the setter and getter methods are defined for it.
+The `Blorgh::Post` model should then have some code to convert the `author_name`
+field into an actual `User` object and associate it as that post's `author`
+before the post is saved. It will also need to have an `attr_accessor` set up
+for this field, so that the setter and getter methods are defined for it.
 
-To do all this, you'll need to add the `attr_accessor` for `author_name`, the association for the author and the `before_save` call into `app/models/blorgh/post.rb`. The `author` association will be hard-coded to the `User` class for the time being.
+To do all this, you'll need to add the `attr_accessor` for `author_name`, the
+association for the author and the `before_save` call into
+`app/models/blorgh/post.rb`. The `author` association will be hard-coded to the
+`User` class for the time being.
 
 ```ruby
 attr_accessor :author_name
@@ -553,7 +801,11 @@ private
   end
 ```
 
-By defining that the `author` association's object is represented by the `User` class a link is established between the engine and the application. There needs to be a way of associating the records in the `blorgh_posts` table with the records in the `users` table. Because the association is called `author`, there should be an `author_id` column added to the `blorgh_posts` table.
+By representing the `author` association's object with the `User` class, a link
+is established between the engine and the application. There needs to be a way
+of associating the records in the `blorgh_posts` table with the records in the
+`users` table. Because the association is called `author`, there should be an
+`author_id` column added to the `blorgh_posts` table.
 
 To generate this new column, run this command within the engine:
 
@@ -561,31 +813,41 @@ To generate this new column, run this command within the engine:
 $ rails g migration add_author_id_to_blorgh_posts author_id:integer
 ```
 
-NOTE: Due to the migration's name and the column specification after it, Rails will automatically know that you want to add a column to a specific table and write that into the migration for you. You don't need to tell it any more than this.
+NOTE: Due to the migration's name and the column specification after it, Rails
+will automatically know that you want to add a column to a specific table and
+write that into the migration for you. You don't need to tell it any more than
+this.
 
-This migration will need to be run on the application. To do that, it must first be copied using this command:
+This migration will need to be run on the application. To do that, it must first
+be copied using this command:
 
 ```bash
 $ rake blorgh:install:migrations
 ```
 
-Notice here that only _one_ migration was copied over here. This is because the first two migrations were copied over the first time this command was run.
+Notice that only _one_ migration was copied over here. This is because the first
+two migrations were copied over the first time this command was run.
 
-```
-NOTE Migration [timestamp]_create_blorgh_posts.rb from blorgh has been skipped. Migration with the same name already exists.
-NOTE Migration [timestamp]_create_blorgh_comments.rb from blorgh has been skipped. Migration with the same name already exists.
-Copied migration [timestamp]_add_author_id_to_blorgh_posts.rb from blorgh
+``` 
+NOTE Migration [timestamp]_create_blorgh_posts.rb from blorgh has been
+skipped. Migration with the same name already exists. NOTE Migration
+[timestamp]_create_blorgh_comments.rb from blorgh has been skipped. Migration
+with the same name already exists. Copied migration
+[timestamp]_add_author_id_to_blorgh_posts.rb from blorgh 
 ```
 
-Run this migration using this command:
+Run the migration using:
 
 ```bash
 $ rake db:migrate
 ```
 
-Now with all the pieces in place, an action will take place that will associate an author - represented by a record in the `users` table - with a post, represented by the `blorgh_posts` table from the engine.
+Now with all the pieces in place, an action will take place that will associate
+an author - represented by a record in the `users` table - with a post,
+represented by the `blorgh_posts` table from the engine.
 
-Finally, the author's name should be displayed on the post's page. Add this code above the "Title" output inside `app/views/blorgh/posts/show.html.erb`:
+Finally, the author's name should be displayed on the post's page. Add this code
+above the "Title" output inside `app/views/blorgh/posts/show.html.erb`:
 
 ```html+erb
 <p>
@@ -594,13 +856,15 @@ Finally, the author's name should be displayed on the post's page. Add this code
 </p>
 ```
 
-By outputting `@post.author` using the `<%=` tag, the `to_s` method will be called on the object. By default, this will look quite ugly:
+By outputting `@post.author` using the `<%=` tag, the `to_s` method will be
+called on the object. By default, this will look quite ugly:
 
 ```
 #<User:0x00000100ccb3b0>
 ```
 
-This is undesirable and it would be much better to have the user's name there. To do this, add a `to_s` method to the `User` class within the application:
+This is undesirable. It would be much better to have the user's name there. To
+do this, add a `to_s` method to the `User` class within the application:
 
 ```ruby
 def to_s
@@ -608,50 +872,77 @@ def to_s
 end
 ```
 
-Now instead of the ugly Ruby object output the author's name will be displayed.
+Now instead of the ugly Ruby object output, the author's name will be displayed.
 
-#### Using a controller provided by the application
+#### Using a Controller Provided by the Application
 
-Because Rails controllers generally share code for things like authentication and accessing session variables, by default they inherit from `ApplicationController`. Rails engines, however are scoped to run independently from the main application, so each engine gets a scoped `ApplicationController`. This namespace prevents code collisions, but often engine controllers should access methods in the main application's `ApplicationController`. An easy way to provide this access is to change the engine's scoped `ApplicationController` to inherit from the main application's `ApplicationController`. For our Blorgh engine this would be done by changing `app/controllers/blorgh/application_controller.rb` to look like:
+Because Rails controllers generally share code for things like authentication
+and accessing session variables, they inherit from `ApplicationController` by
+default. Rails engines, however are scoped to run independently from the main
+application, so each engine gets a scoped `ApplicationController`. This
+namespace prevents code collisions, but often engine controllers need to access
+methods in the main application's `ApplicationController`. An easy way to
+provide this access is to change the engine's scoped `ApplicationController` to
+inherit from the main application's `ApplicationController`. For our Blorgh
+engine this would be done by changing
+`app/controllers/blorgh/application_controller.rb` to look like:
 
 ```ruby
 class Blorgh::ApplicationController < ApplicationController
 end
 ```
 
-By default, the engine's controllers inherit from `Blorgh::ApplicationController`. So, after making this change they will have access to the main applications `ApplicationController` as though they were part of the main application.
+By default, the engine's controllers inherit from
+`Blorgh::ApplicationController`. So, after making this change they will have
+access to the main application's `ApplicationController`, as though they were
+part of the main application.
 
-This change does require that the engine is run from a Rails application that has an `ApplicationController`.
+This change does require that the engine is run from a Rails application that
+has an `ApplicationController`.
 
-### Configuring an engine
+### Configuring an Engine
 
-This section covers how to make the `User` class configurable, followed by general configuration tips for the engine.
+This section covers how to make the `User` class configurable, followed by
+general configuration tips for the engine.
 
-#### Setting configuration settings in the application
+#### Setting Configuration Settings in the Application
 
-The next step is to make the class that represents a `User` in the application customizable for the engine. This is because, as explained before, that class may not always be `User`. To make this customizable, the engine will have a configuration setting called `author_class` that will be used to specify what the class representing users is inside the application.
+The next step is to make the class that represents a `User` in the application
+customizable for the engine. This is because that class may not always be
+`User`, as previously explained. To make this setting customizable, the engine
+will have a configuration setting called `author_class` that will be used to
+specify which class represents users inside the application.
 
-To define this configuration setting, you should use a `mattr_accessor` inside the `Blorgh` module for the engine, located at `lib/blorgh.rb` inside the engine. Inside this module, put this line:
+To define this configuration setting, you should use a `mattr_accessor` inside
+the `Blorgh` module for the engine. Add this line to `lib/blorgh.rb` inside the
+engine:
 
 ```ruby
 mattr_accessor :author_class
 ```
 
-This method works like its brothers `attr_accessor` and `cattr_accessor`, but provides a setter and getter method on the module with the specified name. To use it, it must be referenced using `Blorgh.author_class`.
+This method works like its brothers, `attr_accessor` and `cattr_accessor`, but
+provides a setter and getter method on the module with the specified name. To
+use it, it must be referenced using `Blorgh.author_class`.
 
-The next step is switching the `Blorgh::Post` model over to this new setting. For the `belongs_to` association inside this model (`app/models/blorgh/post.rb`), it will now become this:
+The next step is to switch the `Blorgh::Post` model over to this new setting.
+Change the `belongs_to` association inside this model
+(`app/models/blorgh/post.rb`) to this:
 
 ```ruby
 belongs_to :author, class_name: Blorgh.author_class
 ```
 
-The `set_author` method also located in this class should also use this class:
+The `set_author` method in the `Blorgh::Post` model should also use this class:
 
 ```ruby
 self.author = Blorgh.author_class.constantize.find_or_create_by(name: author_name)
 ```
 
-To save having to call `constantize` on the `author_class` result all the time, you could instead just override the `author_class` getter method inside the `Blorgh` module in the `lib/blorgh.rb` file to always call `constantize` on the saved value before returning the result:
+To save having to call `constantize` on the `author_class` result all the time,
+you could instead just override the `author_class` getter method inside the
+`Blorgh` module in the `lib/blorgh.rb` file to always call `constantize` on the
+saved value before returning the result:
 
 ```ruby
 def self.author_class
@@ -665,82 +956,123 @@ This would then turn the above code for `set_author` into this:
 self.author = Blorgh.author_class.find_or_create_by(name: author_name)
 ```
 
-Resulting in something a little shorter, and more implicit in its behavior. The `author_class` method should always return a `Class` object.
+Resulting in something a little shorter, and more implicit in its behavior. The
+`author_class` method should always return a `Class` object.
 
-Since we changed the `author_class` method to no longer return a
-`String` but a `Class` we must also modify our `belongs_to` definition
-in the `Blorgh::Post` model:
+Since we changed the `author_class` method to return a `String` instead of a
+`Class`, we must also modify our `belongs_to` definition in the `Blorgh::Post`
+model:
 
 ```ruby
 belongs_to :author, class_name: Blorgh.author_class.to_s
 ```
 
-To set this configuration setting within the application, an initializer should be used. By using an initializer, the configuration will be set up before the application starts and calls the engine's models which may depend on this configuration setting existing.
+To set this configuration setting within the application, an initializer should
+be used. By using an initializer, the configuration will be set up before the
+application starts and calls the engine's models, which may depend on this
+configuration setting existing.
 
-Create a new initializer at `config/initializers/blorgh.rb` inside the application where the `blorgh` engine is installed and put this content in it:
+Create a new initializer at `config/initializers/blorgh.rb` inside the
+application where the `blorgh` engine is installed and put this content in it:
 
 ```ruby
 Blorgh.author_class = "User"
 ```
 
-WARNING: It's very important here to use the `String` version of the class, rather than the class itself. If you were to use the class, Rails would attempt to load that class and then reference the related table, which could lead to problems if the table wasn't already existing. Therefore, a `String` should be used and then converted to a class using `constantize` in the engine later on.
+WARNING: It's very important here to use the `String` version of the class,
+rather than the class itself. If you were to use the class, Rails would attempt
+to load that class and then reference the related table. This could lead to
+problems if the table wasn't already existing. Therefore, a `String` should be
+used and then converted to a class using `constantize` in the engine later on.
 
-Go ahead and try to create a new post. You will see that it works exactly in the same way as before, except this time the engine is using the configuration setting in `config/initializers/blorgh.rb` to learn what the class is.
+Go ahead and try to create a new post. You will see that it works exactly in the
+same way as before, except this time the engine is using the configuration
+setting in `config/initializers/blorgh.rb` to learn what the class is.
 
-There are now no strict dependencies on what the class is, only what the API for the class must be. The engine simply requires this class to define a `find_or_create_by` method which returns an object of that class to be associated with a post when it's created. This object, of course, should have some sort of identifier by which it can be referenced.
+There are now no strict dependencies on what the class is, only what the API for
+the class must be. The engine simply requires this class to define a
+`find_or_create_by` method which returns an object of that class, to be
+associated with a post when it's created. This object, of course, should have
+some sort of identifier by which it can be referenced.
 
-#### General engine configuration
+#### General Engine Configuration
 
-Within an engine, there may come a time where you wish to use things such as initializers, internationalization or other configuration options. The great news is that these things are entirely possible because a Rails engine shares much the same functionality as a Rails application. In fact, a Rails application's functionality is actually a superset of what is provided by engines!
+Within an engine, there may come a time where you wish to use things such as
+initializers, internationalization or other configuration options. The great
+news is that these things are entirely possible, because a Rails engine shares
+much the same functionality as a Rails application. In fact, a Rails
+application's functionality is actually a superset of what is provided by
+engines!
 
 If you wish to use an initializer - code that should run before the engine is
 loaded - the place for it is the `config/initializers` folder. This directory's
-functionality is explained in the
-[Initializers section](configuring.html#initializers) of the Configuring guide,
-and works precisely the same way as the `config/initializers` directory inside
-an application. Same goes for if you want to use a standard initializer.
+functionality is explained in the [Initializers
+section](configuring.html#initializers) of the Configuring guide, and works
+precisely the same way as the `config/initializers` directory inside an
+application. The same thing goes if you want to use a standard initializer.
 
-For locales, simply place the locale files in the `config/locales` directory, just like you would in an application.
+For locales, simply place the locale files in the `config/locales` directory,
+just like you would in an application.
 
-Testing an engine
------------------
+Testing an engine -----------------
 
-When an engine is generated there is a smaller dummy application created inside it at `test/dummy`. This application is used as a mounting point for the engine to make testing the engine extremely simple. You may extend this application by generating controllers, models or views from within the directory, and then use those to test your engine.
+When an engine is generated, there is a smaller dummy application created inside
+it at `test/dummy`. This application is used as a mounting point for the engine,
+to make testing the engine extremely simple. You may extend this application by
+generating controllers, models or views from within the directory, and then use
+those to test your engine.
 
-The `test` directory should be treated like a typical Rails testing environment, allowing for unit, functional and integration tests.
+The `test` directory should be treated like a typical Rails testing environment,
+allowing for unit, functional and integration tests.
 
-### Functional tests
+### Functional Tests
 
-A matter worth taking into consideration when writing functional tests is that the tests are going to be running on an application - the `test/dummy` application - rather than your engine. This is due to the setup of the testing environment; an engine needs an application as a host for testing its main functionality, especially controllers. This means that if you were to make a typical `GET` to a controller in a controller's functional test like this:
+A matter worth taking into consideration when writing functional tests is that
+the tests are going to be running on an application - the `test/dummy`
+application - rather than your engine. This is due to the setup of the testing
+environment; an engine needs an application as a host for testing its main
+functionality, especially controllers. This means that if you were to make a
+typical `GET` to a controller in a controller's functional test like this:
 
 ```ruby
 get :index
 ```
 
-It may not function correctly. This is because the application doesn't know how to route these requests to the engine unless you explicitly tell it **how**. To do this, you must pass the `:use_route` option (as a parameter) on these requests also:
+It may not function correctly. This is because the application doesn't know how
+to route these requests to the engine unless you explicitly tell it **how**. To
+do this, you must also pass the `:use_route` option as a parameter on these
+requests:
 
 ```ruby
 get :index, use_route: :blorgh
 ```
 
-This tells the application that you still want to perform a `GET` request to the `index` action of this controller, just that you want to use the engine's route to get there, rather than the application.
+This tells the application that you still want to perform a `GET` request to the
+`index` action of this controller, but you want to use the engine's route to get
+there, rather than the application's one.
 
 Improving engine functionality
 ------------------------------
 
-This section explains how to add and/or override engine MVC functionality in the main Rails application.
+This section explains how to add and/or override engine MVC functionality in the
+main Rails application.
 
 ### Overriding Models and Controllers
 
-Engine model and controller classes can be extended by open classing them in the main Rails application (since model and controller classes are just Ruby classes that inherit Rails specific functionality). Open classing an Engine class redefines it for use in the main application. This is usually implemented by using the decorator pattern.
+Engine model and controller classes can be extended by open classing them in the
+main Rails application (since model and controller classes are just Ruby classes
+that inherit Rails specific functionality). Open classing an Engine class
+redefines it for use in the main application. This is usually implemented by
+using the decorator pattern.
 
-For simple class modifications use `Class#class_eval`, and for complex class modifications, consider using `ActiveSupport::Concern`.
+For simple class modifications, use `Class#class_eval`. For complex class
+modifications, consider using `ActiveSupport::Concern`.
 
-#### A note on Decorators and loading code
+#### A note on Decorators and Loading Code
 
 Because these decorators are not referenced by your Rails application itself,
-Rails' autoloading system will not kick in and load your decorators. This
-means that you need to require them yourself.
+Rails' autoloading system will not kick in and load your decorators. This means
+that you need to require them yourself.
 
 Here is some sample code to do this:
 
@@ -764,7 +1096,7 @@ that isn't referenced by your main application.
 
 #### Implementing Decorator Pattern Using Class#class_eval
 
-**Adding** `Post#time_since_created`,
+**Adding** `Post#time_since_created`:
 
 ```ruby
 # MyApp/app/decorators/models/blorgh/post_decorator.rb
@@ -785,7 +1117,7 @@ end
 ```
 
 
-**Overriding** `Post#summary`
+**Overriding** `Post#summary`:
 
 ```ruby
 # MyApp/app/decorators/models/blorgh/post_decorator.rb
@@ -810,9 +1142,13 @@ end
 
 #### Implementing Decorator Pattern Using ActiveSupport::Concern
 
-Using `Class#class_eval` is great for simple adjustments, but for more complex class modifications, you might want to consider using [`ActiveSupport::Concern`](http://edgeapi.rubyonrails.org/classes/ActiveSupport/Concern.html). ActiveSupport::Concern manages load order of interlinked dependent modules and classes at run time allowing you to significantly modularize your code.
+Using `Class#class_eval` is great for simple adjustments, but for more complex
+class modifications, you might want to consider using [`ActiveSupport::Concern`]
+(http://edgeapi.rubyonrails.org/classes/ActiveSupport/Concern.html).
+ActiveSupport::Concern manages load order of interlinked dependent modules and
+classes at run time allowing you to significantly modularize your code.
 
-**Adding** `Post#time_since_created` and **Overriding** `Post#summary`
+**Adding** `Post#time_since_created` and **Overriding** `Post#summary`:
 
 ```ruby
 # MyApp/app/models/blorgh/post.rb
@@ -845,7 +1181,7 @@ module Blorgh::Concerns::Models::Post
   extend ActiveSupport::Concern
 
   # 'included do' causes the included code to be evaluated in the
-  # context where it is included (post.rb), rather than be
+  # context where it is included (post.rb), rather than being
   # executed in the module's context (blorgh/concerns/models/post).
   included do
     attr_accessor :author_name
@@ -871,15 +1207,23 @@ module Blorgh::Concerns::Models::Post
 end
 ```
 
-### Overriding views
+### Overriding Views
 
-When Rails looks for a view to render, it will first look in the `app/views` directory of the application. If it cannot find the view there, then it will check in the `app/views` directories of all engines which have this directory.
+When Rails looks for a view to render, it will first look in the `app/views`
+directory of the application. If it cannot find the view there, it will check in
+the `app/views` directories of all engines that have this directory.
 
-When the application is asked to render the view for `Blorgh::PostsController`'s index action, it will look the path `app/views/blorgh/posts/index.html.erb`, first within the application. If it cannot find it, it will look inside the engine.
+When the application is asked to render the view for `Blorgh::PostsController`'s
+index action, it will first look for the path
+`app/views/blorgh/posts/index.html.erb` within the application. If it cannot
+find it, it will look inside the engine.
 
-You can override this view in the application by simply creating a new file at `app/views/blorgh/posts/index.html.erb`. Then you can completely change what this view would normally output.
+You can override this view in the application by simply creating a new file at
+`app/views/blorgh/posts/index.html.erb`. Then you can completely change what
+this view would normally output.
 
-Try this now by creating a new file at `app/views/blorgh/posts/index.html.erb` and put this content in it:
+Try this now by creating a new file at `app/views/blorgh/posts/index.html.erb`
+and put this content in it:
 
 ```html+erb
 <h1>Posts</h1>
@@ -894,9 +1238,13 @@ Try this now by creating a new file at `app/views/blorgh/posts/index.html.erb` a
 
 ### Routes
 
-Routes inside an engine are, by default, isolated from the application. This is done by the `isolate_namespace` call inside the `Engine` class. This essentially means that the application and its engines can have identically named routes and they will not clash.
+Routes inside an engine are isolated from the application by default. This is
+done by the `isolate_namespace` call inside the `Engine` class. This essentially
+means that the application and its engines can have identically named routes and
+they will not clash.
 
-Routes inside an engine are drawn on the `Engine` class within `config/routes.rb`, like this:
+Routes inside an engine are drawn on the `Engine` class within
+`config/routes.rb`, like this:
 
 ```ruby
 Blorgh::Engine.routes.draw do
@@ -904,43 +1252,71 @@ Blorgh::Engine.routes.draw do
 end
 ```
 
-By having isolated routes such as this, if you wish to link to an area of an engine from within an application, you will need to use the engine's routing proxy method. Calls to normal routing methods such as `posts_path` may end up going to undesired locations if both the application and the engine both have such a helper defined.
+By having isolated routes such as this, if you wish to link to an area of an
+engine from within an application, you will need to use the engine's routing
+proxy method. Calls to normal routing methods such as `posts_path` may end up
+going to undesired locations if both the application and the engine have such a
+helper defined.
 
-For instance, the following example would go to the application's `posts_path` if that template was rendered from the application, or the engine's `posts_path` if it was rendered from the engine:
+For instance, the following example would go to the application's `posts_path`
+if that template was rendered from the application, or the engine's `posts_path`
+if it was rendered from the engine:
 
 ```erb
 <%= link_to "Blog posts", posts_path %>
 ```
 
-To make this route always use the engine's `posts_path` routing helper method, we must call the method on the routing proxy method that shares the same name as the engine.
+To make this route always use the engine's `posts_path` routing helper method,
+we must call the method on the routing proxy method that shares the same name as
+the engine.
 
 ```erb
 <%= link_to "Blog posts", blorgh.posts_path %>
 ```
 
-If you wish to reference the application inside the engine in a similar way, use the `main_app` helper:
+If you wish to reference the application inside the engine in a similar way, use
+the `main_app` helper:
 
 ```erb
 <%= link_to "Home", main_app.root_path %>
 ```
 
-If you were to use this inside an engine, it would **always** go to the application's root. If you were to leave off the `main_app` "routing proxy" method call, it could potentially go to the engine's or application's root, depending on where it was called from.
+If you were to use this inside an engine, it would **always** go to the
+application's root. If you were to leave off the `main_app` "routing proxy"
+method call, it could potentially go to the engine's or application's root,
+depending on where it was called from.
 
-If a template is rendered from within an engine and it's attempting to use one of the application's routing helper methods, it may result in an undefined method call. If you encounter such an issue, ensure that you're not attempting to call the application's routing methods without the `main_app` prefix from within the engine.
+If a template rendered from within an engine attempts to use one of the
+application's routing helper methods, it may result in an undefined method call.
+If you encounter such an issue, ensure that you're not attempting to call the
+application's routing methods without the `main_app` prefix from within the
+engine.
 
 ### Assets
 
-Assets within an engine work in an identical way to a full application. Because the engine class inherits from `Rails::Engine`, the application will know to look up in the engine's `app/assets` and `lib/assets` directories for potential assets.
+Assets within an engine work in an identical way to a full application. Because
+the engine class inherits from `Rails::Engine`, the application will know to
+look up assets in the engine's 'app/assets' and 'lib/assets' directories.
 
-Much like all the other components of an engine, the assets should also be namespaced. This means if you have an asset called `style.css`, it should be placed at `app/assets/stylesheets/[engine name]/style.css`, rather than `app/assets/stylesheets/style.css`. If this asset wasn't namespaced, then there is a possibility that the host application could have an asset named identically, in which case the application's asset would take precedence and the engine's one would be all but ignored.
+Like all of the other components of an engine, the assets should be namespaced.
+This means that if you have an asset called `style.css`, it should be placed at
+`app/assets/stylesheets/[engine name]/style.css`, rather than
+`app/assets/stylesheets/style.css`. If this asset isn't namespaced, there is a
+possibility that the host application could have an asset named identically, in
+which case the application's asset would take precedence and the engine's one
+would be ignored.
 
-Imagine that you did have an asset located at `app/assets/stylesheets/blorgh/style.css` To include this asset inside an application, just use `stylesheet_link_tag` and reference the asset as if it were inside the engine:
+Imagine that you did have an asset located at
+`app/assets/stylesheets/blorgh/style.css` To include this asset inside an
+application, just use `stylesheet_link_tag` and reference the asset as if it
+were inside the engine:
 
 ```erb
 <%= stylesheet_link_tag "blorgh/style.css" %>
 ```
 
-You can also specify these assets as dependencies of other assets using the Asset Pipeline require statements in processed files:
+You can also specify these assets as dependencies of other assets using Asset
+Pipeline require statements in processed files:
 
 ```
 /*
@@ -948,16 +1324,21 @@ You can also specify these assets as dependencies of other assets using the Asse
 */
 ```
 
-INFO. Remember that in order to use languages like Sass or CoffeeScript, you should add the relevant library to your engine's `.gemspec`.
+INFO. Remember that in order to use languages like Sass or CoffeeScript, you
+should add the relevant library to your engine's `.gemspec`.
 
 ### Separate Assets & Precompiling
 
-There are some situations where your engine's assets are not required by the host application. For example, say that you've created
-an admin functionality that only exists for your engine. In this case, the host application doesn't need to require `admin.css`
-or `admin.js`. Only the gem's admin layout needs these assets. It doesn't make sense for the host app to include `"blorgh/admin.css"` in it's stylesheets. In this situation, you should explicitly define these assets for precompilation.
-This tells sprockets to add your engine assets when `rake assets:precompile` is ran.
+There are some situations where your engine's assets are not required by the
+host application. For example, say that you've created an admin functionality
+that only exists for your engine. In this case, the host application doesn't
+need to require `admin.css` or `admin.js`. Only the gem's admin layout needs
+these assets. It doesn't make sense for the host app to include
+`"blorgh/admin.css"` in its stylesheets. In this situation, you should
+explicitly define these assets for precompilation.  This tells sprockets to add
+your engine assets when `rake assets:precompile` is triggered.
 
-You can define assets for precompilation in `engine.rb`
+You can define assets for precompilation in `engine.rb`:
 
 ```ruby
 initializer "blorgh.assets.precompile" do |app|
@@ -965,15 +1346,15 @@ initializer "blorgh.assets.precompile" do |app|
 end
 ```
 
-For more information, read the [Asset Pipeline guide](asset_pipeline.html)
+For more information, read the [Asset Pipeline guide](asset_pipeline.html).
 
-### Other gem dependencies
+### Other Gem Dependencies
 
-Gem dependencies inside an engine should be specified inside the
-`.gemspec` file at the root of the engine. The reason is that the engine may
-be installed as a gem. If dependencies were to be specified inside the `Gemfile`,
-these would not be recognized by a traditional gem install and so they would not
-be installed, causing the engine to malfunction.
+Gem dependencies inside an engine should be specified inside the `.gemspec` file
+at the root of the engine. The reason is that the engine may be installed as a
+gem. If dependencies were to be specified inside the `Gemfile`, these would not
+be recognized by a traditional gem install and so they would not be installed,
+causing the engine to malfunction.
 
 To specify a dependency that should be installed with the engine during a
 traditional `gem install`, specify it inside the `Gem::Specification` block
@@ -991,11 +1372,12 @@ s.add_development_dependency "moo"
 ```
 
 Both kinds of dependencies will be installed when `bundle install` is run inside
-the application. The development dependencies for the gem will only be used when
-the tests for the engine are running.
+of the application. The development dependencies for the gem will only be used
+when the tests for the engine are running.
 
 Note that if you want to immediately require dependencies when the engine is
-required, you should require them before the engine's initialization. For example:
+required, you should require them before the engine's initialization. For
+example:
 
 ```ruby
 require 'other_engine/engine'