Debugging Rails applications
============================
You may have heard about debugging:
_Debugging is a methodical process of finding and reducing the number of bugs, or defects, in a computer program or a piece of electronic hardware thus making it behave as expected._
Many times your code may not behave has you expect, sometimes you will try to print in logs or console values to make a diagnostic of the problem.
Unfortunately, you won't find always the answer you are looking for this way. In that case, you will need to know what's happening and adventure into Rails, in this journey the debugger will be your best companion.
== Introducing the debugger
=== Rails debugging history
Rails has built-in support for ruby-debug since April 28, 2007. When the Breakpoint library was removed in favor of ruby-debug, the reason?
The breakpointer, included in the Breakpoint library, and Binding.of_caller were removed in favor of relying on ruby-debug by Kent Sibilev.
The problem was a bug in Ruby 1.8.4, that was fixed in Ruby 1.8.5 but left unusable the breakpointer. The Breakpoint library is also no longer being maintained, so it's effectively dead.
=== Start debugging your rails app
Inside any Rails application you can invoke the debugger by calling the *debugger* method.
Let's take a look at an example:
[source, ruby]
----------------------------------------------------------------------------
class PeopleController < ApplicationController
def new
debugger
@person = Person.new
end
end
----------------------------------------------------------------------------
If you see the message in the console or logs:
[source, shell]
----------------------------------------------------------------------------
***** Debugger requested, but was not available: Start server with --debugger to enable *****
----------------------------------------------------------------------------
Make sure you have started your web server with the option --debugger:
[source, shell]
----------------------------------------------------------------------------
~/PathTo/rails_project$ script/server --debugger
----------------------------------------------------------------------------
In order to use Rails debugging you'll need to be running either *WEBrick* or *Mongrel*. For the moment, no alternative servers are supported.
== The debugger
=== The context
As soon as your application calls the *debugger* method, the debugger will be started and you will be placed in the ruby-debug's prompt (rdb:n) in the console running the server. The n is the thread number.
For example:
[source, shell]
----------------------------------------------------------------------------
@posts = Post.find(:all)
(rdb:7)
----------------------------------------------------------------------------
Now it's time to play and dig into our application. The first we are going to do is ask our debugger for help... so we type: *help* (You didn't see that coming, right?)
[source, shell]
----------------------------------------------------------------------------
(rdb:7) help
ruby-debug help v0.10.2
Type 'help <command-name>' for help on a specific command
Available commands:
backtrace delete enable help next quit show trace
break disable eval info p reload source undisplay
catch display exit irb pp restart step up
condition down finish list ps save thread var
continue edit frame method putl set tmate where
----------------------------------------------------------------------------
The second command before we move on, is one of the most useful command: *list* (or his shorthand *l*)
This command will give us a starting point of where we are by printing 10 lines centered around the current line; the current line here is line 6 and is marked by =>.
[source, shell]
----------------------------------------------------------------------------
(rdb:7) list
[1, 10] in /PathToProject/posts_controller.rb
1 class PostsController < ApplicationController
2 # GET /posts
3 # GET /posts.xml
4 def index
5 debugger
=> 6 @posts = Post.find(:all)
7
8 respond_to do |format|
9 format.html # index.html.erb
10 format.xml { render :xml => @posts }
----------------------------------------------------------------------------
If we do it again, this time using just *l*, the next ten lines of the file will be printed out.
[source, shell]
----------------------------------------------------------------------------
(rdb:7) l
[11, 20] in /Users/miloops/Workspace/rails_edge_app/app/controllers/posts_controller.rb
11 end
12 end
13
14 # GET /posts/1
15 # GET /posts/1.xml
16 def show
17 @post = Post.find(params[:id])
18
19 respond_to do |format|
20 format.html # show.html.erb
----------------------------------------------------------------------------
And so on until the end of the current file, when the end of file is reached, it will start again from the beginning of the file and continue again up to the end, acting as a circular buffer.
=== The context
When we start debugging your application, we will be placed in different contexts as you go through the different parts of the stack.
A context will be created when a stopping point or an event is reached. It has information about the suspended program which enable a debugger to inspect the frame stack, evaluate variables from the perspective of the debugged program, and contains information about the place the debugged program is stopped.
At any time we can call the *backtrace* command to print the backtrace of the application, this is very helpful to know how we got where we are. If you ever wondered about how you got somewhere in your code, then *backtrace* is your answer.
The available variables are the same as if we were running the code line by line, after all, that's what debugging is.
In the following example we will print the instance_variables defined within the current context.
[source, shell]
----------------------------------------------------------------------------
@posts = Post.find(:all)
(rdb:11) instance_variables
["@_response", "@action_name", "@url", "@_session", "@_cookies", "@performed_render", "@_flash", "@template", "@_params", "@before_filter_chain_aborted", "@request_origin", "@_headers", "@performed_redirect", "@_request"]
----------------------------------------------------------------------------
As you may expect, all variables that you can access from a controller are displayed, lets run the next line, we will use *next* (we will get later into this command).
[source, shell]
----------------------------------------------------------------------------
(rdb:11) n
Processing PostsController#index (for 127.0.0.1 at 2008-09-04 19:51:34) [GET]
Session ID: BAh7BiIKZmxhc2hJQzonQWN0aW9uQ29udHJvbGxlcjo6Rmxhc2g6OkZsYXNoSGFzaHsABjoKQHVzZWR7AA==--b16e91b992453a8cc201694d660147bba8b0fd0e
Parameters: {"action"=>"index", "controller"=>"posts"}
/PathToProject/posts_controller.rb:8
respond_to do |format|
-------------------------------------------------------------------------------
And ask again for the instance_variables.
[source, shell]
----------------------------------------------------------------------------
(rdb:11) instance_variables
["@_response", "@action_name", "@url", "@_session", "@_cookies", "@performed_render", "@_flash", "@template", "@_params", "@before_filter_chain_aborted", "@posts", "@request_origin", "@_headers", "@performed_redirect", "@_request"]
----------------------------------------------------------------------------
Now @posts is a included in them, because the line was executed.
Other useful methods to inspect the current context:
* local_variables
* global_variables
* methods
* self, self.class, etc...
=== Everything as an end
To exit ruby-debug, use the *quit* command (abbreviated *q*), or alias *exit*.
A simple quit tries to terminate all threads in effect. Therefore your server will be stopped and you will have to start it again.
== References
* link:http://www.datanoise.com/ruby-debug[ruby-debug Homepage]
* link:http://www.sitepoint.com/article/debug-rails-app-ruby-debug/[Article: Debugging a Rails application with ruby-debug]
* link:http://brian.maybeyoureinsane.net/blog/2007/05/07/ruby-debug-basics-screencast/[ruby-debug Basics screencast]
* link:http://railscasts.com/episodes/54-debugging-with-ruby-debug[Ryan Bate's ruby-debug screencast]
* link:http://bashdb.sourceforge.net/ruby-debug.html[Debugging with ruby-debug]