module ActiveRecord
# Raised by save! and create! when the record is invalid. Use the
# +record+ method to retrieve the record which did not validate.
# begin
# complex_operation_that_calls_save!_internally
# rescue ActiveRecord::RecordInvalid => invalid
# puts invalid.record.errors
# end
class RecordInvalid < ActiveRecordError
attr_reader :record
def initialize(record)
@record = record
super("Validation failed: #{@record.errors.full_messages.join(", ")}")
end
end
# Active Record validation is reported to and from this object, which is used by Base#save to
# determine whether the object is in a valid state to be saved. See usage example in Validations.
class Errors
include Enumerable
def initialize(base) # :nodoc:
@base, @errors = base, {}
end
@@default_error_messages = {
:inclusion => "is not included in the list",
:exclusion => "is reserved",
:invalid => "is invalid",
:confirmation => "doesn't match confirmation",
:accepted => "must be accepted",
:empty => "can't be empty",
:blank => "can't be blank",
:too_long => "is too long (maximum is %d characters)",
:too_short => "is too short (minimum is %d characters)",
:wrong_length => "is the wrong length (should be %d characters)",
:taken => "has already been taken",
:not_a_number => "is not a number",
:greater_than => "must be greater than %d",
:greater_than_or_equal_to => "must be greater than or equal to %d",
:equal_to => "must be equal to %d",
:less_than => "must be less than %d",
:less_than_or_equal_to => "must be less than or equal to %d",
:odd => "must be odd",
:even => "must be even"
}
# Holds a hash with all the default error messages that can be replaced by your own copy or localizations.
cattr_accessor :default_error_messages
# Adds an error to the base object instead of any particular attribute. This is used
# to report errors that don't tie to any specific attribute, but rather to the object
# as a whole. These error messages don't get prepended with any field name when iterating
# with each_full, so they should be complete sentences.
def add_to_base(msg)
add(:base, msg)
end
# Adds an error message (+msg+) to the +attribute+, which will be returned on a call to <tt>on(attribute)</tt>
# for the same attribute and ensure that this error object returns false when asked if <tt>empty?</tt>. More than one
# error can be added to the same +attribute+ in which case an array will be returned on a call to <tt>on(attribute)</tt>.
# If no +msg+ is supplied, "invalid" is assumed.
def add(attribute, msg = @@default_error_messages[:invalid])
@errors[attribute.to_s] = [] if @errors[attribute.to_s].nil?
@errors[attribute.to_s] << msg
end
# Will add an error message to each of the attributes in +attributes+ that is empty.
def add_on_empty(attributes, msg = @@default_error_messages[:empty])
for attr in [attributes].flatten
value = @base.respond_to?(attr.to_s) ? @base.send(attr.to_s) : @base[attr.to_s]
is_empty = value.respond_to?("empty?") ? value.empty? : false
add(attr, msg) unless !value.nil? && !is_empty
end
end
# Will add an error message to each of the attributes in +attributes+ that is blank (using Object#blank?).
def add_on_blank(attributes, msg = @@default_error_messages[:blank])
for attr in [attributes].flatten
value = @base.respond_to?(attr.to_s) ? @base.send(attr.to_s) : @base[attr.to_s]
add(attr, msg) if value.blank?
end
end
# Returns true if the specified +attribute+ has errors associated with it.
#
# class Company < ActiveRecord::Base
# validates_presence_of :name, :address, :email
# validates_length_of :name, :in => 5..30
# end
#
# company = Company.create(:address => '123 First St.')
# company.errors.invalid?(:name) # => true
# company.errors.invalid?(:address) # => false
def invalid?(attribute)
!@errors[attribute.to_s].nil?
end
# Returns nil, if no errors are associated with the specified +attribute+.
# Returns the error message, if one error is associated with the specified +attribute+.
# Returns an array of error messages, if more than one error is associated with the specified +attribute+.
#
# class Company < ActiveRecord::Base
# validates_presence_of :name, :address, :email
# validates_length_of :name, :in => 5..30
# end
#
# company = Company.create(:address => '123 First St.')
# company.errors.on(:name) # => ["is too short (minimum is 5 characters)", "can't be blank"]
# company.errors.on(:email) # => "can't be blank"
# company.errors.on(:address) # => nil
def on(attribute)
errors = @errors[attribute.to_s]
return nil if errors.nil?
errors.size == 1 ? errors.first : errors
end
alias :[] :on
# Returns errors assigned to the base object through add_to_base according to the normal rules of on(attribute).
def on_base
on(:base)
end
# Yields each attribute and associated message per error added.
#
# class Company < ActiveRecord::Base
# validates_presence_of :name, :address, :email
# validates_length_of :name, :in => 5..30
# end
#
# company = Company.create(:address => '123 First St.')
# company.errors.each{|attr,msg| puts "#{attr} - #{msg}" } # =>
# name - is too short (minimum is 5 characters)
# name - can't be blank
# address - can't be blank
def each
@errors.each_key { |attr| @errors[attr].each { |msg| yield attr, msg } }
end
# Yields each full error message added. So Person.errors.add("first_name", "can't be empty") will be returned
# through iteration as "First name can't be empty".
#
# class Company < ActiveRecord::Base
# validates_presence_of :name, :address, :email
# validates_length_of :name, :in => 5..30
# end
#
# company = Company.create(:address => '123 First St.')
# company.errors.each_full{|msg| puts msg } # =>
# Name is too short (minimum is 5 characters)
# Name can't be blank
# Address can't be blank
def each_full
full_messages.each { |msg| yield msg }
end
# Returns all the full error messages in an array.
#
# class Company < ActiveRecord::Base
# validates_presence_of :name, :address, :email
# validates_length_of :name, :in => 5..30
# end
#
# company = Company.create(:address => '123 First St.')
# company.errors.full_messages # =>
# ["Name is too short (minimum is 5 characters)", "Name can't be blank", "Address can't be blank"]
def full_messages
full_messages = []
@errors.each_key do |attr|
@errors[attr].each do |msg|
next if msg.nil?
if attr == "base"
full_messages << msg
else
full_messages << @base.class.human_attribute_name(attr) + " " + msg
end
end
end
full_messages
end
# Returns true if no errors have been added.
def empty?
@errors.empty?
end
# Removes all errors that have been added.
def clear
@errors = {}
end
# Returns the total number of errors added. Two errors added to the same attribute will be counted as such.
def size
@errors.values.inject(0) { |error_count, attribute| error_count + attribute.size }
end
alias_method :count, :size
alias_method :length, :size
# Return an XML representation of this error object.
#
# class Company < ActiveRecord::Base
# validates_presence_of :name, :address, :email
# validates_length_of :name, :in => 5..30
# end
#
# company = Company.create(:address => '123 First St.')
# company.errors.to_xml # =>
# <?xml version="1.0" encoding="UTF-8"?>
# <errors>
# <error>Name is too short (minimum is 5 characters)</error>
# <error>Name can't be blank</error>
# <error>Address can't be blank</error>
# </errors>
def to_xml(options={})
options[:root] ||= "errors"
options[:indent] ||= 2
options[:builder] ||= Builder::XmlMarkup.new(:indent => options[:indent])
options[:builder].instruct! unless options.delete(:skip_instruct)
options[:builder].errors do |e|
full_messages.each { |msg| e.error(msg) }
end
end
end
# Active Records implement validation by overwriting Base#validate (or the variations, +validate_on_create+ and
# +validate_on_update+). Each of these methods can inspect the state of the object, which usually means ensuring
# that a number of attributes have a certain value (such as not empty, within a given range, matching a certain regular expression).
#
# Example:
#
# class Person < ActiveRecord::Base
# protected
# def validate
# errors.add_on_empty %w( first_name last_name )
# errors.add("phone_number", "has invalid format") unless phone_number =~ /[0-9]*/
# end
#
# def validate_on_create # is only run the first time a new object is saved
# unless valid_discount?(membership_discount)
# errors.add("membership_discount", "has expired")
# end
# end
#
# def validate_on_update
# errors.add_to_base("No changes have occurred") if unchanged_attributes?
# end
# end
#
# person = Person.new("first_name" => "David", "phone_number" => "what?")
# person.save # => false (and doesn't do the save)
# person.errors.empty? # => false
# person.errors.count # => 2
# person.errors.on "last_name" # => "can't be empty"
# person.errors.on "phone_number" # => "has invalid format"
# person.errors.each_full { |msg| puts msg }
# # => "Last name can't be empty\n" +
# "Phone number has invalid format"
#
# person.attributes = { "last_name" => "Heinemeier", "phone_number" => "555-555" }
# person.save # => true (and person is now saved in the database)
#
# An +Errors+ object is automatically created for every Active Record.
#
# Please do have a look at ActiveRecord::Validations::ClassMethods for a higher level of validations.
module Validations
VALIDATIONS = %w( validate validate_on_create validate_on_update )
def self.included(base) # :nodoc:
base.extend ClassMethods
base.class_eval do
alias_method_chain :save, :validation
alias_method_chain :save!, :validation
alias_method_chain :update_attribute, :validation_skipping
end
base.send :include, ActiveSupport::Callbacks
# TODO: Use helper ActiveSupport::Callbacks#define_callbacks instead
%w( validate validate_on_create validate_on_update ).each do |validation_method|
base.class_eval <<-"end_eval"
def self.#{validation_method}(*methods, &block)
options = methods.extract_options!
methods << block if block_given?
methods.map! { |method| Callback.new(:#{validation_method}, method, options) }
existing_methods = read_inheritable_attribute(:#{validation_method}) || []
write_inheritable_attribute(:#{validation_method}, existing_methods | methods)
end
def self.#{validation_method}_callback_chain
read_inheritable_attribute(:#{validation_method}) || []
end
end_eval
end
end
# All of the following validations are defined in the class scope of the model that you're interested in validating.
# They offer a more declarative way of specifying when the model is valid and when it is not. It is recommended to use
# these over the low-level calls to validate and validate_on_create when possible.
module ClassMethods
DEFAULT_VALIDATION_OPTIONS = {
:on => :save,
:allow_nil => false,
:allow_blank => false,
:message => nil
}.freeze
ALL_RANGE_OPTIONS = [ :is, :within, :in, :minimum, :maximum ].freeze
ALL_NUMERICALITY_CHECKS = { :greater_than => '>', :greater_than_or_equal_to => '>=',
:equal_to => '==', :less_than => '<', :less_than_or_equal_to => '<=',
:odd => 'odd?', :even => 'even?' }.freeze
# Adds a validation method or block to the class. This is useful when
# overriding the #validate instance method becomes too unwieldly and
# you're looking for more descriptive declaration of your validations.
#
# This can be done with a symbol pointing to a method:
#
# class Comment < ActiveRecord::Base
# validate :must_be_friends
#
# def must_be_friends
# errors.add_to_base("Must be friends to leave a comment") unless commenter.friend_of?(commentee)
# end
# end
#
# Or with a block which is passed the current record to be validated:
#
# class Comment < ActiveRecord::Base
# validate do |comment|
# comment.must_be_friends
# end
#
# def must_be_friends
# errors.add_to_base("Must be friends to leave a comment") unless commenter.friend_of?(commentee)
# end
# end
#
# This usage applies to #validate_on_create and #validate_on_update as well.
# Validates each attribute against a block.
#
# class Person < ActiveRecord::Base
# validates_each :first_name, :last_name do |record, attr, value|
# record.errors.add attr, 'starts with z.' if value[0] == ?z
# end
# end
#
# Options:
# * <tt>on</tt> - Specifies when this validation is active (default is :save, other options :create, :update)
# * <tt>allow_nil</tt> - Skip validation if attribute is nil.
# * <tt>allow_blank</tt> - Skip validation if attribute is blank.
# * <tt>if</tt> - Specifies a method, proc or string to call to determine if the validation should
# occur (e.g. :if => :allow_validation, or :if => Proc.new { |user| user.signup_step > 2 }). The
# method, proc or string should return or evaluate to a true or false value.
# * <tt>unless</tt> - Specifies a method, proc or string to call to determine if the validation should
# not occur (e.g. :unless => :skip_validation, or :unless => Proc.new { |user| user.signup_step <= 2 }). The
# method, proc or string should return or evaluate to a true or false value.
def validates_each(*attrs)
options = attrs.extract_options!.symbolize_keys
attrs = attrs.flatten
# Declare the validation.
send(validation_method(options[:on] || :save), options) do |record|
attrs.each do |attr|
value = record.send(attr)
next if (value.nil? && options[:allow_nil]) || (value.blank? && options[:allow_blank])
yield record, attr, value
end
end
end
# Encapsulates the pattern of wanting to validate a password or email address field with a confirmation. Example:
#
# Model:
# class Person < ActiveRecord::Base
# validates_confirmation_of :user_name, :password
# validates_confirmation_of :email_address, :message => "should match confirmation"
# end
#
# View:
# <%= password_field "person", "password" %>
# <%= password_field "person", "password_confirmation" %>
#
# The added +password_confirmation+ attribute is virtual; it exists only as an in-memory attribute for validating the password.
# To achieve this, the validation adds accessors to the model for the confirmation attribute. NOTE: This check is performed
# only if +password_confirmation+ is not nil, and by default only on save. To require confirmation, make sure to add a presence
# check for the confirmation attribute:
#
# validates_presence_of :password_confirmation, :if => :password_changed?
#
# Configuration options:
# * <tt>message</tt> - A custom error message (default is: "doesn't match confirmation")
# * <tt>on</tt> - Specifies when this validation is active (default is :save, other options :create, :update)
# * <tt>if</tt> - Specifies a method, proc or string to call to determine if the validation should
# occur (e.g. :if => :allow_validation, or :if => Proc.new { |user| user.signup_step > 2 }). The
# method, proc or string should return or evaluate to a true or false value.
# * <tt>unless</tt> - Specifies a method, proc or string to call to determine if the validation should
# not occur (e.g. :unless => :skip_validation, or :unless => Proc.new { |user| user.signup_step <= 2 }). The
# method, proc or string should return or evaluate to a true or false value.
def validates_confirmation_of(*attr_names)
configuration = { :message => ActiveRecord::Errors.default_error_messages[:confirmation], :on => :save }
configuration.update(attr_names.extract_options!)
attr_accessor(*(attr_names.map { |n| "#{n}_confirmation" }))
validates_each(attr_names, configuration) do |record, attr_name, value|
record.errors.add(attr_name, configuration[:message]) unless record.send("#{attr_name}_confirmation").nil? or value == record.send("#{attr_name}_confirmation")
end
end
# Encapsulates the pattern of wanting to validate the acceptance of a terms of service check box (or similar agreement). Example:
#
# class Person < ActiveRecord::Base
# validates_acceptance_of :terms_of_service
# validates_acceptance_of :eula, :message => "must be abided"
# end
#
# If the database column does not exist, the terms_of_service attribute is entirely virtual. This check is
# performed only if terms_of_service is not nil and by default on save.
#
# Configuration options:
# * <tt>message</tt> - A custom error message (default is: "must be accepted")
# * <tt>on</tt> - Specifies when this validation is active (default is :save, other options :create, :update)
# * <tt>allow_nil</tt> - Skip validation if attribute is nil. (default is true)
# * <tt>accept</tt> - Specifies value that is considered accepted. The default value is a string "1", which
# makes it easy to relate to an HTML checkbox. This should be set to 'true' if you are validating a database
# column, since the attribute is typecast from "1" to <tt>true</tt> before validation.
# * <tt>if</tt> - Specifies a method, proc or string to call to determine if the validation should
# occur (e.g. :if => :allow_validation, or :if => Proc.new { |user| user.signup_step > 2 }). The
# method, proc or string should return or evaluate to a true or false value.
# * <tt>unless</tt> - Specifies a method, proc or string to call to determine if the validation should
# not occur (e.g. :unless => :skip_validation, or :unless => Proc.new { |user| user.signup_step <= 2 }). The
# method, proc or string should return or evaluate to a true or false value.
def validates_acceptance_of(*attr_names)
configuration = { :message => ActiveRecord::Errors.default_error_messages[:accepted], :on => :save, :allow_nil => true, :accept => "1" }
configuration.update(attr_names.extract_options!)
db_cols = begin
column_names
rescue ActiveRecord::StatementInvalid
[]
end
names = attr_names.reject { |name| db_cols.include?(name.to_s) }
attr_accessor(*names)
validates_each(attr_names,configuration) do |record, attr_name, value|
record.errors.add(attr_name, configuration[:message]) unless value == configuration[:accept]
end
end
# Validates that the specified attributes are not blank (as defined by Object#blank?). Happens by default on save. Example:
#
# class Person < ActiveRecord::Base
# validates_presence_of :first_name
# end
#
# The first_name attribute must be in the object and it cannot be blank.
#
# If you want to validate the presence of a boolean field (where the real values are true and false),
# you will want to use validates_inclusion_of :field_name, :in => [true, false]
# This is due to the way Object#blank? handles boolean values. false.blank? # => true
#
# Configuration options:
# * <tt>message</tt> - A custom error message (default is: "can't be blank")
# * <tt>on</tt> - Specifies when this validation is active (default is :save, other options :create, :update)
# * <tt>if</tt> - Specifies a method, proc or string to call to determine if the validation should
# occur (e.g. :if => :allow_validation, or :if => Proc.new { |user| user.signup_step > 2 }). The
# method, proc or string should return or evaluate to a true or false value.
# * <tt>unless</tt> - Specifies a method, proc or string to call to determine if the validation should
# not occur (e.g. :unless => :skip_validation, or :unless => Proc.new { |user| user.signup_step <= 2 }). The
# method, proc or string should return or evaluate to a true or false value.
#
def validates_presence_of(*attr_names)
configuration = { :message => ActiveRecord::Errors.default_error_messages[:blank], :on => :save }
configuration.update(attr_names.extract_options!)
# can't use validates_each here, because it cannot cope with nonexistent attributes,
# while errors.add_on_empty can
send(validation_method(configuration[:on]), configuration) do |record|
record.errors.add_on_blank(attr_names, configuration[:message])
end
end
# Validates that the specified attribute matches the length restrictions supplied. Only one option can be used at a time:
#
# class Person < ActiveRecord::Base
# validates_length_of :first_name, :maximum=>30
# validates_length_of :last_name, :maximum=>30, :message=>"less than %d if you don't mind"
# validates_length_of :fax, :in => 7..32, :allow_nil => true
# validates_length_of :phone, :in => 7..32, :allow_blank => true
# validates_length_of :user_name, :within => 6..20, :too_long => "pick a shorter name", :too_short => "pick a longer name"
# validates_length_of :fav_bra_size, :minimum=>1, :too_short=>"please enter at least %d character"
# validates_length_of :smurf_leader, :is=>4, :message=>"papa is spelled with %d characters... don't play me."
# end
#
# Configuration options:
# * <tt>minimum</tt> - The minimum size of the attribute
# * <tt>maximum</tt> - The maximum size of the attribute
# * <tt>is</tt> - The exact size of the attribute
# * <tt>within</tt> - A range specifying the minimum and maximum size of the attribute
# * <tt>in</tt> - A synonym(or alias) for :within
# * <tt>allow_nil</tt> - Attribute may be nil; skip validation.
# * <tt>allow_blank</tt> - Attribute may be blank; skip validation.
#
# * <tt>too_long</tt> - The error message if the attribute goes over the maximum (default is: "is too long (maximum is %d characters)")
# * <tt>too_short</tt> - The error message if the attribute goes under the minimum (default is: "is too short (min is %d characters)")
# * <tt>wrong_length</tt> - The error message if using the :is method and the attribute is the wrong size (default is: "is the wrong length (should be %d characters)")
# * <tt>message</tt> - The error message to use for a :minimum, :maximum, or :is violation. An alias of the appropriate too_long/too_short/wrong_length message
# * <tt>on</tt> - Specifies when this validation is active (default is :save, other options :create, :update)
# * <tt>if</tt> - Specifies a method, proc or string to call to determine if the validation should
# occur (e.g. :if => :allow_validation, or :if => Proc.new { |user| user.signup_step > 2 }). The
# method, proc or string should return or evaluate to a true or false value.
# * <tt>unless</tt> - Specifies a method, proc or string to call to determine if the validation should
# not occur (e.g. :unless => :skip_validation, or :unless => Proc.new { |user| user.signup_step <= 2 }). The
# method, proc or string should return or evaluate to a true or false value.
def validates_length_of(*attrs)
# Merge given options with defaults.
options = {
:too_long => ActiveRecord::Errors.default_error_messages[:too_long],
:too_short => ActiveRecord::Errors.default_error_messages[:too_short],
:wrong_length => ActiveRecord::Errors.default_error_messages[:wrong_length]
}.merge(DEFAULT_VALIDATION_OPTIONS)
options.update(attrs.extract_options!.symbolize_keys)
# Ensure that one and only one range option is specified.
range_options = ALL_RANGE_OPTIONS & options.keys
case range_options.size
when 0
raise ArgumentError, 'Range unspecified. Specify the :within, :maximum, :minimum, or :is option.'
when 1
# Valid number of options; do nothing.
else
raise ArgumentError, 'Too many range options specified. Choose only one.'
end
# Get range option and value.
option = range_options.first
option_value = options[range_options.first]
case option
when :within, :in
raise ArgumentError, ":#{option} must be a Range" unless option_value.is_a?(Range)
too_short = options[:too_short] % option_value.begin
too_long = options[:too_long] % option_value.end
validates_each(attrs, options) do |record, attr, value|
if value.nil? or value.split(//).size < option_value.begin
record.errors.add(attr, too_short)
elsif value.split(//).size > option_value.end
record.errors.add(attr, too_long)
end
end
when :is, :minimum, :maximum
raise ArgumentError, ":#{option} must be a nonnegative Integer" unless option_value.is_a?(Integer) and option_value >= 0
# Declare different validations per option.
validity_checks = { :is => "==", :minimum => ">=", :maximum => "<=" }
message_options = { :is => :wrong_length, :minimum => :too_short, :maximum => :too_long }
message = (options[:message] || options[message_options[option]]) % option_value
validates_each(attrs, options) do |record, attr, value|
if value.kind_of?(String)
record.errors.add(attr, message) unless !value.nil? and value.split(//).size.method(validity_checks[option])[option_value]
else
record.errors.add(attr, message) unless !value.nil? and value.size.method(validity_checks[option])[option_value]
end
end
end
end
alias_method :validates_size_of, :validates_length_of
# Validates whether the value of the specified attributes are unique across the system. Useful for making sure that only one user
# can be named "davidhh".
#
# class Person < ActiveRecord::Base
# validates_uniqueness_of :user_name, :scope => :account_id
# end
#
# It can also validate whether the value of the specified attributes are unique based on multiple scope parameters. For example,
# making sure that a teacher can only be on the schedule once per semester for a particular class.
#
# class TeacherSchedule < ActiveRecord::Base
# validates_uniqueness_of :teacher_id, :scope => [:semester_id, :class_id]
# end
#
# When the record is created, a check is performed to make sure that no record exists in the database with the given value for the specified
# attribute (that maps to a column). When the record is updated, the same check is made but disregarding the record itself.
#
# Because this check is performed outside the database there is still a chance that duplicate values
# will be inserted in two parallel transactions. To guarantee against this you should create a
# unique index on the field. See +add_index+ for more information.
#
# Configuration options:
# * <tt>message</tt> - Specifies a custom error message (default is: "has already been taken")
# * <tt>scope</tt> - One or more columns by which to limit the scope of the uniquness constraint.
# * <tt>case_sensitive</tt> - Looks for an exact match. Ignored by non-text columns (true by default).
# * <tt>allow_nil</tt> - If set to true, skips this validation if the attribute is null (default is: false)
# * <tt>allow_blank</tt> - If set to true, skips this validation if the attribute is blank (default is: false)
# * <tt>if</tt> - Specifies a method, proc or string to call to determine if the validation should
# occur (e.g. :if => :allow_validation, or :if => Proc.new { |user| user.signup_step > 2 }). The
# method, proc or string should return or evaluate to a true or false value.
# * <tt>unless</tt> - Specifies a method, proc or string to call to determine if the validation should
# not occur (e.g. :unless => :skip_validation, or :unless => Proc.new { |user| user.signup_step <= 2 }). The
# method, proc or string should return or evaluate to a true or false value.
def validates_uniqueness_of(*attr_names)
configuration = { :message => ActiveRecord::Errors.default_error_messages[:taken], :case_sensitive => true }
configuration.update(attr_names.extract_options!)
validates_each(attr_names,configuration) do |record, attr_name, value|
if value.nil? || (configuration[:case_sensitive] || !columns_hash[attr_name.to_s].text?)
condition_sql = "#{record.class.quoted_table_name}.#{attr_name} #{attribute_condition(value)}"
condition_params = [value]
else
condition_sql = "LOWER(#{record.class.quoted_table_name}.#{attr_name}) #{attribute_condition(value)}"
condition_params = [value.downcase]
end
if scope = configuration[:scope]
Array(scope).map do |scope_item|
scope_value = record.send(scope_item)
condition_sql << " AND #{record.class.quoted_table_name}.#{scope_item} #{attribute_condition(scope_value)}"
condition_params << scope_value
end
end
unless record.new_record?
condition_sql << " AND #{record.class.quoted_table_name}.#{record.class.primary_key} <> ?"
condition_params << record.send(:id)
end
# The check for an existing value should be run from a class that
# isn't abstract. This means working down from the current class
# (self), to the first non-abstract class. Since classes don't know
# their subclasses, we have to build the hierarchy between self and
# the record's class.
class_hierarchy = [record.class]
while class_hierarchy.first != self
class_hierarchy.insert(0, class_hierarchy.first.superclass)
end
# Now we can work our way down the tree to the first non-abstract
# class (which has a database table to query from).
finder_class = class_hierarchy.detect { |klass| !klass.abstract_class? }
if finder_class.find(:first, :conditions => [condition_sql, *condition_params])
record.errors.add(attr_name, configuration[:message])
end
end
end
# Validates whether the value of the specified attribute is of the correct form by matching it against the regular expression
# provided.
#
# class Person < ActiveRecord::Base
# validates_format_of :email, :with => /\A([^@\s]+)@((?:[-a-z0-9]+\.)+[a-z]{2,})\Z/i, :on => :create
# end
#
# Note: use \A and \Z to match the start and end of the string, ^ and $ match the start/end of a line.
#
# A regular expression must be provided or else an exception will be raised.
#
# Configuration options:
# * <tt>message</tt> - A custom error message (default is: "is invalid")
# * <tt>allow_nil</tt> - If set to true, skips this validation if the attribute is null (default is: false)
# * <tt>allow_blank</tt> - If set to true, skips this validation if the attribute is blank (default is: false)
# * <tt>with</tt> - The regular expression used to validate the format with (note: must be supplied!)
# * <tt>on</tt> Specifies when this validation is active (default is :save, other options :create, :update)
# * <tt>if</tt> - Specifies a method, proc or string to call to determine if the validation should
# occur (e.g. :if => :allow_validation, or :if => Proc.new { |user| user.signup_step > 2 }). The
# method, proc or string should return or evaluate to a true or false value.
# * <tt>unless</tt> - Specifies a method, proc or string to call to determine if the validation should
# not occur (e.g. :unless => :skip_validation, or :unless => Proc.new { |user| user.signup_step <= 2 }). The
# method, proc or string should return or evaluate to a true or false value.
def validates_format_of(*attr_names)
configuration = { :message => ActiveRecord::Errors.default_error_messages[:invalid], :on => :save, :with => nil }
configuration.update(attr_names.extract_options!)
raise(ArgumentError, "A regular expression must be supplied as the :with option of the configuration hash") unless configuration[:with].is_a?(Regexp)
validates_each(attr_names, configuration) do |record, attr_name, value|
record.errors.add(attr_name, configuration[:message]) unless value.to_s =~ configuration[:with]
end
end
# Validates whether the value of the specified attribute is available in a particular enumerable object.
#
# class Person < ActiveRecord::Base
# validates_inclusion_of :gender, :in => %w( m f ), :message => "woah! what are you then!??!!"
# validates_inclusion_of :age, :in => 0..99
# validates_inclusion_of :format, :in => %w( jpg gif png ), :message => "extension %s is not included in the list"
# end
#
# Configuration options:
# * <tt>in</tt> - An enumerable object of available items
# * <tt>message</tt> - Specifies a customer error message (default is: "is not included in the list")
# * <tt>allow_nil</tt> - If set to true, skips this validation if the attribute is null (default is: false)
# * <tt>allow_blank</tt> - If set to true, skips this validation if the attribute is blank (default is: false)
# * <tt>if</tt> - Specifies a method, proc or string to call to determine if the validation should
# occur (e.g. :if => :allow_validation, or :if => Proc.new { |user| user.signup_step > 2 }). The
# method, proc or string should return or evaluate to a true or false value.
# * <tt>unless</tt> - Specifies a method, proc or string to call to determine if the validation should
# not occur (e.g. :unless => :skip_validation, or :unless => Proc.new { |user| user.signup_step <= 2 }). The
# method, proc or string should return or evaluate to a true or false value.
def validates_inclusion_of(*attr_names)
configuration = { :message => ActiveRecord::Errors.default_error_messages[:inclusion], :on => :save }
configuration.update(attr_names.extract_options!)
enum = configuration[:in] || configuration[:within]
raise(ArgumentError, "An object with the method include? is required must be supplied as the :in option of the configuration hash") unless enum.respond_to?("include?")
validates_each(attr_names, configuration) do |record, attr_name, value|
record.errors.add(attr_name, configuration[:message] % value) unless enum.include?(value)
end
end
# Validates that the value of the specified attribute is not in a particular enumerable object.
#
# class Person < ActiveRecord::Base
# validates_exclusion_of :username, :in => %w( admin superuser ), :message => "You don't belong here"
# validates_exclusion_of :age, :in => 30..60, :message => "This site is only for under 30 and over 60"
# validates_exclusion_of :format, :in => %w( mov avi ), :message => "extension %s is not allowed"
# end
#
# Configuration options:
# * <tt>in</tt> - An enumerable object of items that the value shouldn't be part of
# * <tt>message</tt> - Specifies a customer error message (default is: "is reserved")
# * <tt>allow_nil</tt> - If set to true, skips this validation if the attribute is null (default is: false)
# * <tt>allow_blank</tt> - If set to true, skips this validation if the attribute is blank (default is: false)
# * <tt>if</tt> - Specifies a method, proc or string to call to determine if the validation should
# occur (e.g. :if => :allow_validation, or :if => Proc.new { |user| user.signup_step > 2 }). The
# method, proc or string should return or evaluate to a true or false value.
# * <tt>unless</tt> - Specifies a method, proc or string to call to determine if the validation should
# not occur (e.g. :unless => :skip_validation, or :unless => Proc.new { |user| user.signup_step <= 2 }). The
# method, proc or string should return or evaluate to a true or false value.
def validates_exclusion_of(*attr_names)
configuration = { :message => ActiveRecord::Errors.default_error_messages[:exclusion], :on => :save }
configuration.update(attr_names.extract_options!)
enum = configuration[:in] || configuration[:within]
raise(ArgumentError, "An object with the method include? is required must be supplied as the :in option of the configuration hash") unless enum.respond_to?("include?")
validates_each(attr_names, configuration) do |record, attr_name, value|
record.errors.add(attr_name, configuration[:message] % value) if enum.include?(value)
end
end
# Validates whether the associated object or objects are all valid themselves. Works with any kind of association.
#
# class Book < ActiveRecord::Base
# has_many :pages
# belongs_to :library
#
# validates_associated :pages, :library
# end
#
# Warning: If, after the above definition, you then wrote:
#
# class Page < ActiveRecord::Base
# belongs_to :book
#
# validates_associated :book
# end
#
# ...this would specify a circular dependency and cause infinite recursion.
#
# NOTE: This validation will not fail if the association hasn't been assigned. If you want to ensure that the association
# is both present and guaranteed to be valid, you also need to use validates_presence_of.
#
# Configuration options:
# * <tt>message</tt> - A custom error message (default is: "is invalid")
# * <tt>on</tt> Specifies when this validation is active (default is :save, other options :create, :update)
# * <tt>if</tt> - Specifies a method, proc or string to call to determine if the validation should
# occur (e.g. :if => :allow_validation, or :if => Proc.new { |user| user.signup_step > 2 }). The
# method, proc or string should return or evaluate to a true or false value.
# * <tt>unless</tt> - Specifies a method, proc or string to call to determine if the validation should
# not occur (e.g. :unless => :skip_validation, or :unless => Proc.new { |user| user.signup_step <= 2 }). The
# method, proc or string should return or evaluate to a true or false value.
def validates_associated(*attr_names)
configuration = { :message => ActiveRecord::Errors.default_error_messages[:invalid], :on => :save }
configuration.update(attr_names.extract_options!)
validates_each(attr_names, configuration) do |record, attr_name, value|
record.errors.add(attr_name, configuration[:message]) unless
(value.is_a?(Array) ? value : [value]).inject(true) { |v, r| (r.nil? || r.valid?) && v }
end
end
# Validates whether the value of the specified attribute is numeric by trying to convert it to
# a float with Kernel.Float (if <tt>integer</tt> is false) or applying it to the regular expression
# <tt>/\A[\+\-]?\d+\Z/</tt> (if <tt>integer</tt> is set to true).
#
# class Person < ActiveRecord::Base
# validates_numericality_of :value, :on => :create
# end
#
# Configuration options:
# * <tt>message</tt> - A custom error message (default is: "is not a number")
# * <tt>on</tt> Specifies when this validation is active (default is :save, other options :create, :update)
# * <tt>only_integer</tt> Specifies whether the value has to be an integer, e.g. an integral value (default is false)
# * <tt>allow_nil</tt> Skip validation if attribute is nil (default is false). Notice that for fixnum and float columns empty strings are converted to nil
# * <tt>greater_than</tt> Specifies the value must be greater than the supplied value
# * <tt>greater_than_or_equal_to</tt> Specifies the value must be greater than or equal the supplied value
# * <tt>equal_to</tt> Specifies the value must be equal to the supplied value
# * <tt>less_than</tt> Specifies the value must be less than the supplied value
# * <tt>less_than_or_equal_to</tt> Specifies the value must be less than or equal the supplied value
# * <tt>odd</tt> Specifies the value must be an odd number
# * <tt>even</tt> Specifies the value must be an even number
# * <tt>if</tt> - Specifies a method, proc or string to call to determine if the validation should
# occur (e.g. :if => :allow_validation, or :if => Proc.new { |user| user.signup_step > 2 }). The
# method, proc or string should return or evaluate to a true or false value.
# * <tt>unless</tt> - Specifies a method, proc or string to call to determine if the validation should
# not occur (e.g. :unless => :skip_validation, or :unless => Proc.new { |user| user.signup_step <= 2 }). The
# method, proc or string should return or evaluate to a true or false value.
def validates_numericality_of(*attr_names)
configuration = { :on => :save, :only_integer => false, :allow_nil => false }
configuration.update(attr_names.extract_options!)
numericality_options = ALL_NUMERICALITY_CHECKS.keys & configuration.keys
(numericality_options - [ :odd, :even ]).each do |option|
raise ArgumentError, ":#{option} must be a number" unless configuration[option].is_a?(Numeric)
end
validates_each(attr_names,configuration) do |record, attr_name, value|
raw_value = record.send("#{attr_name}_before_type_cast") || value
next if configuration[:allow_nil] and raw_value.nil?
if configuration[:only_integer]
unless raw_value.to_s =~ /\A[+-]?\d+\Z/
record.errors.add(attr_name, configuration[:message] || ActiveRecord::Errors.default_error_messages[:not_a_number])
next
end
raw_value = raw_value.to_i
else
begin
raw_value = Kernel.Float(raw_value.to_s)
rescue ArgumentError, TypeError
record.errors.add(attr_name, configuration[:message] || ActiveRecord::Errors.default_error_messages[:not_a_number])
next
end
end
numericality_options.each do |option|
case option
when :odd, :even
record.errors.add(attr_name, configuration[:message] || ActiveRecord::Errors.default_error_messages[option]) unless raw_value.to_i.method(ALL_NUMERICALITY_CHECKS[option])[]
else
record.errors.add(attr_name, configuration[:message] || (ActiveRecord::Errors.default_error_messages[option] % configuration[option])) unless raw_value.method(ALL_NUMERICALITY_CHECKS[option])[configuration[option]]
end
end
end
end
# Creates an object just like Base.create but calls save! instead of save
# so an exception is raised if the record is invalid.
def create!(attributes = nil)
if attributes.is_a?(Array)
attributes.collect { |attr| create!(attr) }
else
object = new(attributes)
object.save!
object
end
end
private
def validation_method(on)
case on
when :save then :validate
when :create then :validate_on_create
when :update then :validate_on_update
end
end
end
# The validation process on save can be skipped by passing false. The regular Base#save method is
# replaced with this when the validations module is mixed in, which it is by default.
def save_with_validation(perform_validation = true)
if perform_validation && valid? || !perform_validation
save_without_validation
else
false
end
end
# Attempts to save the record just like Base#save but will raise a RecordInvalid exception instead of returning false
# if the record is not valid.
def save_with_validation!
if valid?
save_without_validation!
else
raise RecordInvalid.new(self)
end
end
# Updates a single attribute and saves the record without going through the normal validation procedure.
# This is especially useful for boolean flags on existing records. The regular +update_attribute+ method
# in Base is replaced with this when the validations module is mixed in, which it is by default.
def update_attribute_with_validation_skipping(name, value)
send(name.to_s + '=', value)
save(false)
end
# Runs validate and validate_on_create or validate_on_update and returns true if no errors were added otherwise false.
def valid?
errors.clear
run_callbacks(:validate)
validate
if new_record?
run_callbacks(:validate_on_create)
validate_on_create
else
run_callbacks(:validate_on_update)
validate_on_update
end
errors.empty?
end
# Returns the Errors object that holds all information about attribute error messages.
def errors
@errors ||= Errors.new(self)
end
protected
# Overwrite this method for validation checks on all saves and use Errors.add(field, msg) for invalid attributes.
def validate #:doc:
end
# Overwrite this method for validation checks used only on creation.
def validate_on_create #:doc:
end
# Overwrite this method for validation checks used only on updates.
def validate_on_update # :doc:
end
end
end
