module ActionDispatch
module Routing
# In <tt>config/routes.rb</tt> you define URL-to-controller mappings, but the reverse
# is also possible: a URL can be generated from one of your routing definitions.
# URL generation functionality is centralized in this module.
#
# See ActionDispatch::Routing for general information about routing and routes.rb.
#
# <b>Tip:</b> If you need to generate URLs from your models or some other place,
# then ActionController::UrlFor is what you're looking for. Read on for
# an introduction. In general, this module should not be included on its own,
# as it is usually included by url_helpers (as in Rails.application.routes.url_helpers).
#
# == URL generation from parameters
#
# As you may know, some functions, such as ActionController::Base#url_for
# and ActionView::Helpers::UrlHelper#link_to, can generate URLs given a set
# of parameters. For example, you've probably had the chance to write code
# like this in one of your views:
#
# <%= link_to('Click here', controller: 'users',
# action: 'new', message: 'Welcome!') %>
# # => <a href="/users/new?message=Welcome%21">Click here</a>
#
# link_to, and all other functions that require URL generation functionality,
# actually use ActionController::UrlFor under the hood. And in particular,
# they use the ActionController::UrlFor#url_for method. One can generate
# the same path as the above example by using the following code:
#
# include UrlFor
# url_for(controller: 'users',
# action: 'new',
# message: 'Welcome!',
# only_path: true)
# # => "/users/new?message=Welcome%21"
#
# Notice the <tt>only_path: true</tt> part. This is because UrlFor has no
# information about the website hostname that your Rails app is serving. So if you
# want to include the hostname as well, then you must also pass the <tt>:host</tt>
# argument:
#
# include UrlFor
# url_for(controller: 'users',
# action: 'new',
# message: 'Welcome!',
# host: 'www.example.com')
# # => "http://www.example.com/users/new?message=Welcome%21"
#
# By default, all controllers and views have access to a special version of url_for,
# that already knows what the current hostname is. So if you use url_for in your
# controllers or your views, then you don't need to explicitly pass the <tt>:host</tt>
# argument.
#
# For convenience reasons, mailers provide a shortcut for ActionController::UrlFor#url_for.
# So within mailers, you only have to type +url_for+ instead of 'ActionController::UrlFor#url_for'
# in full. However, mailers don't have hostname information, and you still have to provide
# the +:host+ argument or set the default host that will be used in all mailers using the
# configuration option +config.action_mailer.default_url_options+. For more information on
# url_for in mailers read the ActionMailer#Base documentation.
#
#
# == URL generation for named routes
#
# UrlFor also allows one to access methods that have been auto-generated from
# named routes. For example, suppose that you have a 'users' resource in your
# <tt>config/routes.rb</tt>:
#
# resources :users
#
# This generates, among other things, the method <tt>users_path</tt>. By default,
# this method is accessible from your controllers, views and mailers. If you need
# to access this auto-generated method from other places (such as a model), then
# you can do that by including Rails.application.routes.url_helpers in your class:
#
# class User < ActiveRecord::Base
# include Rails.application.routes.url_helpers
#
# def base_uri
# user_path(self)
# end
# end
#
# User.find(1).base_uri # => "/users/1"
#
module UrlFor
extend ActiveSupport::Concern
include PolymorphicRoutes
included do
unless method_defined?(:default_url_options)
# Including in a class uses an inheritable hash. Modules get a plain hash.
if respond_to?(:class_attribute)
class_attribute :default_url_options
else
mattr_writer :default_url_options
end
self.default_url_options = {}
end
include(*_url_for_modules) if respond_to?(:_url_for_modules)
end
def initialize(*)
@_routes = nil
super
end
# Hook overridden in controller to add request information
# with `default_url_options`. Application logic should not
# go into url_options.
def url_options
default_url_options
end
# Generate a URL based on the options provided, default_url_options and the
# routes defined in routes.rb. The following options are supported:
#
# * <tt>:only_path</tt> - If true, the relative URL is returned. Defaults to +false+.
# * <tt>:protocol</tt> - The protocol to connect to. Defaults to 'http'.
# * <tt>:host</tt> - Specifies the host the link should be targeted at.
# If <tt>:only_path</tt> is false, this option must be
# provided either explicitly, or via +default_url_options+.
# * <tt>:subdomain</tt> - Specifies the subdomain of the link, using the +tld_length+
# to split the subdomain from the host.
# If false, removes all subdomains from the host part of the link.
# * <tt>:domain</tt> - Specifies the domain of the link, using the +tld_length+
# to split the domain from the host.
# * <tt>:tld_length</tt> - Number of labels the TLD id composed of, only used if
# <tt>:subdomain</tt> or <tt>:domain</tt> are supplied. Defaults to
# <tt>ActionDispatch::Http::URL.tld_length</tt>, which in turn defaults to 1.
# * <tt>:port</tt> - Optionally specify the port to connect to.
# * <tt>:anchor</tt> - An anchor name to be appended to the path.
# * <tt>:trailing_slash</tt> - If true, adds a trailing slash, as in "/archive/2009/"
# * <tt>:script_name</tt> - Specifies application path relative to domain root. If provided, prepends application path.
#
# Any other key (<tt>:controller</tt>, <tt>:action</tt>, etc.) given to
# +url_for+ is forwarded to the Routes module.
#
# url_for controller: 'tasks', action: 'testing', host: 'somehost.org', port: '8080'
# # => 'http://somehost.org:8080/tasks/testing'
# url_for controller: 'tasks', action: 'testing', host: 'somehost.org', anchor: 'ok', only_path: true
# # => '/tasks/testing#ok'
# url_for controller: 'tasks', action: 'testing', trailing_slash: true
# # => 'http://somehost.org/tasks/testing/'
# url_for controller: 'tasks', action: 'testing', host: 'somehost.org', number: '33'
# # => 'http://somehost.org/tasks/testing?number=33'
# url_for controller: 'tasks', action: 'testing', host: 'somehost.org', script_name: "/myapp"
# # => 'http://somehost.org/myapp/tasks/testing'
# url_for controller: 'tasks', action: 'testing', host: 'somehost.org', script_name: "/myapp", only_path: true
# # => '/myapp/tasks/testing'
#
# Missing routes keys may be filled in from the current request's parameters
# (e.g. +:controller+, +:action+, +:id+ and any other parameters that are
# placed in the path). Given that the current action has been reached
# through `GET /users/1`:
#
# url_for(only_path: true) # => '/users/1'
# url_for(only_path: true, action: 'edit') # => '/users/1/edit'
# url_for(only_path: true, action: 'edit', id: 2) # => '/users/2/edit'
#
# Notice that no +:id+ parameter was provided to the first +url_for+ call
# and the helper used the one from the route's path. Any path parameter
# implicitly used by +url_for+ can always be overwritten like shown on the
# last +url_for+ calls.
def url_for(options = nil)
full_url_for(options)
end
def full_url_for(options = nil) # :nodoc:
case options
when nil
_routes.url_for(url_options.symbolize_keys)
when Hash, ActionController::Parameters
route_name = options.delete :use_route
merged_url_options = options.to_h.symbolize_keys.reverse_merge!(url_options)
_routes.url_for(merged_url_options, route_name)
when String
options
when Symbol
HelperMethodBuilder.url.handle_string_call self, options
when Array
components = options.dup
polymorphic_url(components, components.extract_options!)
when Class
HelperMethodBuilder.url.handle_class_call self, options
else
HelperMethodBuilder.url.handle_model_call self, options
end
end
def route_for(name, *args) # :nodoc:
public_send(:"#{name}_url", *args)
end
protected
def optimize_routes_generation?
_routes.optimize_routes_generation? && default_url_options.empty?
end
private
def _with_routes(routes) # :doc:
old_routes, @_routes = @_routes, routes
yield
ensure
@_routes = old_routes
end
def _routes_context # :doc:
self
end
end
end
end
