require 'active_support/core_ext/object/to_param'
require 'active_support/core_ext/regexp'
require 'action_controller/polymorphic_routes'
module ActionDispatch
# == Routing
#
# The routing module provides URL rewriting in native Ruby. It's a way to
# redirect incoming requests to controllers and actions. This replaces
# mod_rewrite rules. Best of all, Rails' Routing works with any web server.
# Routes are defined in <tt>config/routes.rb</tt>.
#
# Consider the following route, which you will find commented out at the
# bottom of your generated <tt>config/routes.rb</tt>:
#
# match ':controller(/:action(/:id(.:format)))'
#
# This route states that it expects requests to consist of a
# <tt>:controller</tt> followed optionally by an <tt>:action</tt> that in
# turn is followed optionally by an <tt>:id</tt>, which in turn is followed
# optionally by a <tt>:format</tt>
#
# Suppose you get an incoming request for <tt>/blog/edit/22</tt>, you'll end
# up with:
#
# params = { :controller => 'blog',
# :action => 'edit',
# :id => '22'
# }
#
# Think of creating routes as drawing a map for your requests. The map tells
# them where to go based on some predefined pattern:
#
# AppName::Applications.routes.draw do |map|
# Pattern 1 tells some request to go to one place
# Pattern 2 tell them to go to another
# ...
# end
#
# The following symbols are special:
#
# :controller maps to your controller name
# :action maps to an action with your controllers
#
# Other names simply map to a parameter as in the case of <tt>:id</tt>.
#
# == Named routes
#
# Routes can be named by passing an <tt>:as</tt> option,
# allowing for easy reference within your source as +name_of_route_url+
# for the full URL and +name_of_route_path+ for the URI path.
#
# Example:
#
# # In routes.rb
# match '/login' => 'accounts#login', :as => 'login'
#
# # With render, redirect_to, tests, etc.
# redirect_to login_url
#
# Arguments can be passed as well.
#
# redirect_to show_item_path(:id => 25)
#
# Use <tt>root</tt> as a shorthand to name a route for the root path "".
#
# # In routes.rb
# root :to => 'blogs#index'
#
# # would recognize http://www.example.com/ as
# params = { :controller => 'blogs', :action => 'index' }
#
# # and provide these named routes
# root_url # => 'http://www.example.com/'
# root_path # => ''
#
# Note: when using +controller+, the route is simply named after the
# method you call on the block parameter rather than map.
#
# # In routes.rb
# controller :blog do
# match 'blog/show' => :list
# match 'blog/delete' => :delete
# match 'blog/edit/:id' => :edit
# end
#
# # provides named routes for show, delete, and edit
# link_to @article.title, show_path(:id => @article.id)
#
# == Pretty URLs
#
# Routes can generate pretty URLs. For example:
#
# match '/articles/:year/:month/:day', :constraints => {
# :controller => 'articles',
# :action => 'find_by_date',
# :year => /\d{4}/,
# :month => /\d{1,2}/,
# :day => /\d{1,2}/
# }
#
# Using the route above, the URL "http://localhost:3000/articles/2005/11/06"
# maps to
#
# params = {:year => '2005', :month => '11', :day => '06'}
#
# == Regular Expressions and parameters
# You can specify a regular expression to define a format for a parameter.
#
# controller 'geocode' do
# match 'geocode/:postalcode' => :show', :constraints => {
# :postalcode => /\d{5}(-\d{4})?/
# }
#
# Constraints can include the 'ignorecase' and 'extended syntax' regular
# expression modifiers:
#
# controller 'geocode' do
# match 'geocode/:postalcode' => :show', :constraints => {
# :postalcode => /hx\d\d\s\d[a-z]{2}/i
# }
# end
#
# controller 'geocode' do
# match 'geocode/:postalcode' => :show', :constraints => {
# :postalcode => /# Postcode format
# \d{5} #Prefix
# (-\d{4})? #Suffix
# /x
# }
# end
#
# Using the multiline match modifier will raise an ArgumentError.
# Encoding regular expression modifiers are silently ignored. The
# match will always use the default encoding or ASCII.
#
# == HTTP Methods
#
# Using the <tt>:via</tt> option when specifying a route allows you to restrict it to a specific HTTP method.
# Possible values are <tt>:post</tt>, <tt>:get</tt>, <tt>:put</tt>, <tt>:delete</tt> and <tt>:any</tt>.
# If your route needs to respond to more than one method you can use an array, e.g. <tt>[ :get, :post ]</tt>.
# The default value is <tt>:any</tt> which means that the route will respond to any of the HTTP methods.
#
# Examples:
#
# match 'post/:id' => 'posts#show', :via => :get
# match 'post/:id' => "posts#create_comment', :via => :post
#
# Now, if you POST to <tt>/posts/:id</tt>, it will route to the <tt>create_comment</tt> action. A GET on the same
# URL will route to the <tt>show</tt> action.
#
# === HTTP helper methods
#
# An alternative method of specifying which HTTP method a route should respond to is to use the helper
# methods <tt>get</tt>, <tt>post</tt>, <tt>put</tt> and <tt>delete</tt>.
#
# Examples:
#
# get 'post/:id' => 'posts#show'
# post 'post/:id' => "posts#create_comment'
#
# This syntax is less verbose and the intention is more apparent to someone else reading your code,
# however if your route needs to respond to more than one HTTP method (or all methods) then using the
# <tt>:via</tt> option on <tt>match</tt> is preferable.
#
# == Reloading routes
#
# You can reload routes if you feel you must:
#
# Rails::Application.reload_routes!
#
# This will clear all named routes and reload routes.rb if the file has been modified from
# last load. To absolutely force reloading, use <tt>reload!</tt>.
#
# == Testing Routes
#
# The two main methods for testing your routes:
#
# === +assert_routing+
#
# def test_movie_route_properly_splits
# opts = {:controller => "plugin", :action => "checkout", :id => "2"}
# assert_routing "plugin/checkout/2", opts
# end
#
# +assert_routing+ lets you test whether or not the route properly resolves into options.
#
# === +assert_recognizes+
#
# def test_route_has_options
# opts = {:controller => "plugin", :action => "show", :id => "12"}
# assert_recognizes opts, "/plugins/show/12"
# end
#
# Note the subtle difference between the two: +assert_routing+ tests that
# a URL fits options while +assert_recognizes+ tests that a URL
# breaks into parameters properly.
#
# In tests you can simply pass the URL or named route to +get+ or +post+.
#
# def send_to_jail
# get '/jail'
# assert_response :success
# assert_template "jail/front"
# end
#
# def goes_to_login
# get login_url
# #...
# end
#
# == View a list of all your routes
#
# Run <tt>rake routes</tt>.
#
module Routing
autoload :DeprecatedMapper, 'action_dispatch/routing/deprecated_mapper'
autoload :Mapper, 'action_dispatch/routing/mapper'
autoload :Route, 'action_dispatch/routing/route'
autoload :RouteSet, 'action_dispatch/routing/route_set'
autoload :UrlFor, 'action_dispatch/routing/url_for'
SEPARATORS = %w( / . ? ) #:nodoc:
HTTP_METHODS = [:get, :head, :post, :put, :delete, :options] #:nodoc:
# A helper module to hold URL related helpers.
module Helpers #:nodoc:
include ActionController::PolymorphicRoutes
end
end
end
