Merge pull request #4 from redmatrix/master

Merge master into dev branch

1 files changed, 9 insertions, 935 deletions

diff --git a/mod/post.php b/mod/post.php
index 4c52de44a..6555a16c2 100644
--- a/mod/post.php
+++ b/mod/post.php
@@ -9,952 +9,26 @@
 
 require_once('include/zot.php');
 
-/**
- * @brief HTTP POST entry point for Zot.
- *
- * Most access to this endpoint is via the post method.
- * Here we will pick out the magic auth params which arrive as a get request,
- * and the only communications to arrive this way.
- *
- * Magic Auth
- * ==========
- *
- * So-called "magic auth" takes place by a special exchange. On the site where the "channel to be authenticated" lives (e.g. $mysite), 
- * a redirection is made via $mysite/magic to the zot endpoint of the remote site ($remotesite) with special GET parameters.
- *
- * The endpoint is typically  https://$remotesite/post - or whatever was specified as the callback url in prior communications
- * (we will bootstrap an address and fetch a zot info packet if possible where no prior communications exist)
- *
- * Five GET parameters are supplied:
- * * auth => the urlencoded webbie (channel@host.domain) of the channel requesting access
- * * dest => the desired destination URL (urlencoded)
- * * sec  => a random string which is also stored on $mysite for use during the verification phase. 
- * * version => the zot revision
- * * delegate => optional urlencoded webbie of a local channel to invoke delegation rights for
- *
- * When this packet is received, an "auth-check" zot message is sent to $mysite.
- * (e.g. if $_GET['auth'] is foobar@podunk.edu, a zot packet is sent to the podunk.edu zot endpoint, which is typically /post)
- * If no information has been recorded about the requesting identity a zot information packet will be retrieved before
- * continuing.
- *
- * The sender of this packet is an arbitrary/random site channel. The recipients will be a single recipient corresponding
- * to the guid and guid_sig we have associated with the requesting auth identity
- *
- * \code{.json}
- * {
- *   "type":"auth_check",
- *   "sender":{
- *     "guid":"kgVFf_...",
- *     "guid_sig":"PT9-TApz...",
- *     "url":"http:\/\/podunk.edu",
- *     "url_sig":"T8Bp7j..."
- *   },
- *   "recipients":{
- *     {
- *       "guid":"ZHSqb...",
- *       "guid_sig":"JsAAXi..."
- *     }
- *   }
- *   "callback":"\/post",
- *   "version":1,
- *   "secret":"1eaa661",
- *   "secret_sig":"eKV968b1..."
- * }
- * \endcode
- *
- * auth_check messages MUST use encapsulated encryption. This message is sent to the origination site, which checks the 'secret' to see 
- * if it is the same as the 'sec' which it passed originally. It also checks the secret_sig which is the secret signed by the 
- * destination channel's private key and base64url encoded. If everything checks out, a json packet is returned:
- *
- * \code{.json}
- * {
- *   "success":1,
- *   "confirm":"q0Ysovd1u...",
- *   "service_class":(optional)
- *   "level":(optional)
- * }
- * \endcode
- *
- * 'confirm' in this case is the base64url encoded RSA signature of the concatenation of 'secret' with the
- * base64url encoded whirlpool hash of the requestor's guid and guid_sig; signed with the source channel private key. 
- * This prevents a man-in-the-middle from inserting a rogue success packet. Upon receipt and successful 
- * verification of this packet, the destination site will redirect to the original destination URL and indicate a successful remote login. 
- * Service_class can be used by cooperating sites to provide different access rights based on account rights and subscription plans. It is 
- * a string whose contents are not defined by protocol. Example: "basic" or "gold".
- *
- * @param[in,out] App &$a
- */
 function post_init(&$a) {
 
 	if (array_key_exists('auth', $_REQUEST)) {
-
-		$ret = array('success' => false, 'message' => '');
-
-		logger('mod_zot: auth request received.');
-		$address  = $_REQUEST['auth'];
-		$desturl  = $_REQUEST['dest'];
-		$sec      = $_REQUEST['sec'];
-		$version  = $_REQUEST['version'];
-		$delegate = $_REQUEST['delegate'];
-
-		$test     = ((x($_REQUEST, 'test')) ? intval($_REQUEST['test']) : 0);
-
-		// They are authenticating ultimately to the site and not to a particular channel.
-		// Any channel will do, providing it's currently active. We just need to have an 
-		// identity to attach to the packet we send back. So find one. 
-
-		$c = q("select * from channel where channel_removed = 0 limit 1");
-
-		if (! $c) {
-			// nobody here
-			logger('mod_zot: auth: unable to find a response channel');
-			if ($test) {
-				$ret['message'] .= 'no local channels found.' . EOL;
-				json_return_and_die($ret);
-			}
-
-			goaway($desturl);
-		}
-
-		// Try and find a hubloc for the person attempting to auth
-		$x = q("select * from hubloc left join xchan on xchan_hash = hubloc_hash where hubloc_addr = '%s' order by hubloc_id desc",
-			dbesc($address)
-		);
-
-		if (! $x) {
-			// finger them if they can't be found. 
-			$ret = zot_finger($address, null);
-			if ($ret['success']) {
-				$j = json_decode($ret['body'], true);
-				if ($j)
-					import_xchan($j);
-				$x = q("select * from hubloc left join xchan on xchan_hash = hubloc_hash where hubloc_addr = '%s' order by hubloc_id desc",
-					dbesc($address)
-				);
-			}
-		}
-		if(! $x) {
-			logger('mod_zot: auth: unable to finger ' . $address);
-
-			if($test) {
-				$ret['message'] .= 'no hubloc found for ' . $address . ' and probing failed.' . EOL;
-				json_return_and_die($ret);
-			}
-
-			goaway($desturl);
-		}
-
-
-		foreach($x as $xx) {
-			logger('mod_zot: auth request received from ' . $xx['hubloc_addr'] ); 
-
-			// check credentials and access
-
-			// If they are already authenticated and haven't changed credentials, 
-			// we can save an expensive network round trip and improve performance.
-
-			$remote = remote_channel();
-			$result = null;
-			$remote_service_class = '';
-			$remote_level = 0;
-			$remote_hub = $xx['hubloc_url'];
-			$DNT = 0;
-
-			// Also check that they are coming from the same site as they authenticated with originally.
-
-			$already_authed = ((($remote) && ($xx['hubloc_hash'] == $remote) && ($xx['hubloc_url'] === $_SESSION['remote_hub'])) ? true : false); 
-			if($delegate && $delegate !== $_SESSION['delegate_channel'])
-				$already_authed = false;
-
-			$j = array();
-
-			if (! $already_authed) {
-
-				// Auth packets MUST use ultra top-secret hush-hush mode - e.g. the entire packet is encrypted using the site private key
-				// The actual channel sending the packet ($c[0]) is not important, but this provides a generic zot packet with a sender
-				// which can be verified
- 
-				$p = zot_build_packet($c[0],$type = 'auth_check', array(array('guid' => $xx['hubloc_guid'],'guid_sig' => $xx['hubloc_guid_sig'])), $xx['hubloc_sitekey'], $sec);
-				if ($test) {
-					$ret['message'] .= 'auth check packet created using sitekey ' . $xx['hubloc_sitekey'] . EOL;
-					$ret['message'] .= 'packet contents: ' . $p . EOL;
-				}
-
-				$result = zot_zot($xx['hubloc_callback'],$p);
-
-				if (! $result['success']) {
-					logger('mod_zot: auth_check callback failed.');
-					if ($test) {
-						$ret['message'] .= 'auth check request to your site returned .' . print_r($result, true) . EOL;
-						continue;
-					}
-					continue;
-				}
-				$j = json_decode($result['body'], true);
-				if (! $j) {
-					logger('mod_zot: auth_check json data malformed.');
-					if($test) {
-						$ret['message'] .= 'json malformed: ' . $result['body'] . EOL;
-						continue;
-					}
-				}
-			}
-
-			if ($test) {
-				$ret['message'] .= 'auth check request returned .' . print_r($j, true) . EOL;
-			}
-
-			if ($already_authed || $j['success']) {
-				if ($j['success']) {
-					// legit response, but we do need to check that this wasn't answered by a man-in-middle
-					if (! rsa_verify($sec . $xx['xchan_hash'],base64url_decode($j['confirm']),$xx['xchan_pubkey'])) {
-						logger('mod_zot: auth: final confirmation failed.');
-						if ($test) {
-							$ret['message'] .= 'final confirmation failed. ' . $sec . print_r($j,true) . print_r($xx,true);
-							continue;
-						}
-
-						continue;
-					}
-					if (array_key_exists('service_class',$j))
-						$remote_service_class = $j['service_class'];
-					if (array_key_exists('level',$j))
-						$remote_level = $j['level'];
-					if (array_key_exists('DNT',$j))
-						$DNT = $j['DNT'];
-				}
-				// everything is good... maybe
-				if(local_channel()) {
-
-					// tell them to logout if they're logged in locally as anything but the target remote account
-					// in which case just shut up because they don't need to be doing this at all.
-
-					if ($a->channel['channel_hash'] != $xx['xchan_hash']) {
-						logger('mod_zot: auth: already authenticated locally as somebody else.');
-						notice( t('Remote authentication blocked. You are logged into this site locally. Please logout and retry.') . EOL);
-						if ($test) {
-							$ret['message'] .= 'already logged in locally with a conflicting identity.' . EOL;
-							continue;
-						}
-					}
-					continue;
-				}
-
-				// log them in
-
-				if ($test) {
-					$ret['success'] = true;
-					$ret['message'] .= 'Authentication Success!' . EOL;
-					json_return_and_die($ret);
-				}
-
-				$delegation_success = false;
-				if ($delegate) {
-					$r = q("select * from channel left join xchan on channel_hash = xchan_hash where xchan_addr = '%s' limit 1",
-						dbesc($delegate)
-					);
-					if ($r && intval($r[0]['channel_id'])) {
-						$allowed = perm_is_allowed($r[0]['channel_id'],$xx['xchan_hash'],'delegate');
-						if ($allowed) {
-							$_SESSION['delegate_channel'] = $r[0]['channel_id'];
-							$_SESSION['delegate'] = $xx['xchan_hash'];
-							$_SESSION['account_id'] = intval($r[0]['channel_account_id']);
-							require_once('include/security.php');
-							change_channel($r[0]['channel_id']);
-							$delegation_success = true;
-						}
-					}
-				}
-
-				$_SESSION['authenticated'] = 1;
-				if (! $delegation_success) {
-					$_SESSION['visitor_id'] = $xx['xchan_hash'];
-					$_SESSION['my_url'] = $xx['xchan_url'];
-					$_SESSION['my_address'] = $address;
-					$_SESSION['remote_service_class'] = $remote_service_class;
-					$_SESSION['remote_level'] = $remote_level;
-					$_SESSION['remote_hub'] = $remote_hub;
-					$_SESSION['DNT'] = $DNT;
-				}
-
-				$arr = array('xchan' => $xx, 'url' => $desturl, 'session' => $_SESSION);
-				call_hooks('magic_auth_success',$arr);
-				$a->set_observer($xx);
-				require_once('include/security.php');
-				$a->set_groups(init_groups_visitor($_SESSION['visitor_id']));
-				info(sprintf( t('Welcome %s. Remote authentication successful.'),$xx['xchan_name']));
-				logger('mod_zot: auth success from ' . $xx['xchan_addr']); 
-			} 
-			else {
-				if ($test) {
-					$ret['message'] .= 'auth failure. ' . print_r($_REQUEST,true) . print_r($j,true) . EOL;
-					continue;
-				}
-				logger('mod_zot: magic-auth failure - not authenticated: ' . $xx['xchan_addr']);
-			}
-
-			if ($test) {
-				$ret['message'] .= 'auth failure fallthrough ' . print_r($_REQUEST,true) . print_r($j,true) . EOL;
-				continue;
-			}
-		}
-
-		/**
-		 * @FIXME we really want to save the return_url in the session before we
-		 * visit rmagic. This does however prevent a recursion if you visit
-		 * rmagic directly, as it would otherwise send you back here again.
-		 * But z_root() probably isn't where you really want to go.
-		 */
-
-		if(strstr($desturl,z_root() . '/rmagic'))
-			goaway(z_root());
-
-		if ($test) {
-			json_return_and_die($ret);
-		}
-
-		goaway($desturl);
+		require_once('Zotlabs/Zot/Auth.php');
+		$x = new Zotlabs\Zot\Auth($_REQUEST);
+		exit;
 	}
+
 }
 
 
-/**
- * @brief zot communications and messaging.
- *
- * Sender HTTP posts to this endpoint ($site/post typically) with 'data' parameter set to json zot message packet.
- * This packet is optionally encrypted, which we will discover if the json has an 'iv' element.
- * $contents => array( 'alg' => 'aes256cbc', 'iv' => initialisation vector, 'key' => decryption key, 'data' => encrypted data);
- * $contents->iv and $contents->key are random strings encrypted with this site's RSA public key and then base64url encoded.
- * Currently only 'aes256cbc' is used, but this is extensible should that algorithm prove inadequate.
- *
- * Once decrypted, one will find the normal json_encoded zot message packet.
- * 
- * Defined packet types are: notify, purge, refresh, force_refresh, auth_check, ping, and pickup 
- *
- * Standard packet: (used by notify, purge, refresh, force_refresh, and auth_check)
- * \code{.json}
- * {
- *   "type": "notify",
- *   "sender":{
- *     "guid":"kgVFf_1...",
- *     "guid_sig":"PT9-TApzp...",
- *     "url":"http:\/\/podunk.edu",
- *     "url_sig":"T8Bp7j5...",
- *   },
- *   "recipients": { optional recipient array },
- *   "callback":"\/post",
- *   "version":1,
- *   "secret":"1eaa...",
- *   "secret_sig": "df89025470fac8..."
- * }
- * \endcode
- *
- * Signature fields are all signed with the sender channel private key and base64url encoded.
- * Recipients are arrays of guid and guid_sig, which were previously signed with the recipients private 
- * key and base64url encoded and later obtained via channel discovery. Absence of recipients indicates
- * a public message or visible to all potential listeners on this site.
- *
- * "pickup" packet:
- * The pickup packet is sent in response to a notify packet from another site
- * \code{.json}
- * {
- *   "type":"pickup",
- *   "url":"http:\/\/example.com",
- *   "callback":"http:\/\/example.com\/post",
- *   "callback_sig":"teE1_fLI...",
- *   "secret":"1eaa...",
- *   "secret_sig":"O7nB4_..."
- * }
- * \endcode
- *
- * In the pickup packet, the sig fields correspond to the respective data
- * element signed with this site's system private key and then base64url encoded.
- * The "secret" is the same as the original secret from the notify packet. 
- *
- * If verification is successful, a json structure is returned containing a
- * success indicator and an array of type 'pickup'.
- * Each pickup element contains the original notify request and a message field
- * whose contents are dependent on the message type.
- *
- * This JSON array is AES encapsulated using the site public key of the site
- * that sent the initial zot pickup packet.
- * Using the above example, this would be example.com.
- *
- * \code{.json}
- * {
- *   "success":1,
- *   "pickup":{
- *     "notify":{
- *       "type":"notify",
- *       "sender":{
- *         "guid":"kgVFf_...",
- *         "guid_sig":"PT9-TApz...",
- *         "url":"http:\/\/z.podunk.edu",
- *         "url_sig":"T8Bp7j5D..."
- *       },
- *       "callback":"\/post",
- *       "version":1,
- *       "secret":"1eaa661..."
- *     },
- *     "message":{
- *       "type":"activity",
- *       "message_id":"10b049ce384cbb2da9467319bc98169ab36290b8bbb403aa0c0accd9cb072e76@podunk.edu",
- *       "message_top":"10b049ce384cbb2da9467319bc98169ab36290b8bbb403aa0c0accd9cb072e76@podunk.edu",
- *       "message_parent":"10b049ce384cbb2da9467319bc98169ab36290b8bbb403aa0c0accd9cb072e76@podunk.edu",
- *       "created":"2012-11-20 04:04:16",
- *       "edited":"2012-11-20 04:04:16",
- *       "title":"",
- *       "body":"Hi Nickordo",
- *       "app":"",
- *       "verb":"post",
- *       "object_type":"",
- *       "target_type":"",
- *       "permalink":"",
- *       "location":"",
- *       "longlat":"",
- *       "owner":{
- *         "name":"Indigo",
- *         "address":"indigo@podunk.edu",
- *         "url":"http:\/\/podunk.edu",
- *         "photo":{
- *           "mimetype":"image\/jpeg",
- *           "src":"http:\/\/podunk.edu\/photo\/profile\/m\/5"
- *         },
- *         "guid":"kgVFf_...",
- *         "guid_sig":"PT9-TAp...",
- *       },
- *       "author":{
- *         "name":"Indigo",
- *         "address":"indigo@podunk.edu",
- *         "url":"http:\/\/podunk.edu",
- *         "photo":{
- *           "mimetype":"image\/jpeg",
- *           "src":"http:\/\/podunk.edu\/photo\/profile\/m\/5"
- *         },
- *         "guid":"kgVFf_...",
- *         "guid_sig":"PT9-TAp..."
- *       }
- *     }
- *   }
- * }
- * \endcode
- *
- * Currently defined message types are 'activity', 'mail', 'profile', 'location'
- * and 'channel_sync', which each have different content schemas.
- *
- * Ping packet:
- * A ping packet does not require any parameters except the type. It may or may
- * not be encrypted.
- *
- * \code{.json}
- * {
- *   "type": "ping"
- * }
- * \endcode
- *
- * On receipt of a ping packet a ping response will be returned:
- *
- * \code{.json}
- * {
- *   "success" : 1,
- *   "site" {
- *     "url": "http:\/\/podunk.edu",
- *     "url_sig": "T8Bp7j5...",
- *     "sitekey": "-----BEGIN PUBLIC KEY-----
- *                 MIICIjANBgkqhkiG9w0BAQE..."
- *   }
- * }
- * \endcode
- *
- * The ping packet can be used to verify that a site has not been re-installed, and to 
- * initiate corrective action if it has. The url_sig is signed with the site private key
- * and base64url encoded - and this should verify with the enclosed sitekey. Failure to
- * verify indicates the site is corrupt or otherwise unable to communicate using zot.
- * This return packet is not otherwise verified, so should be compared with other
- * results obtained from this site which were verified prior to taking action. For instance
- * if you have one verified result with this signature and key, and other records for this 
- * url which have different signatures and keys, it indicates that the site was re-installed
- * and corrective action may commence (remove or mark invalid any entries with different
- * signatures).
- * If you have no records which match this url_sig and key - no corrective action should
- * be taken as this packet may have been returned by an imposter.  
- *
- * @param[in,out] App &$a
- */
 function post_post(&$a) {
 
-	$encrypted_packet = false;
-	$ret = array('success' => false);
-
-	$data = json_decode($_REQUEST['data'],true);
-
-	/*
-	 * Many message packets will arrive encrypted. The existence of an 'iv'
-	 * element tells us we need to unencapsulate the AES-256-CBC content using
-	 * the site private key.
-	 */
-
-	if($data && array_key_exists('iv',$data)) {
-		$encrypted_packet = true;
-		$data = crypto_unencapsulate($data,get_config('system','prvkey'));
-		logger('mod_zot: decrypt1: ' . $data, LOGGER_DATA);
-		$data = json_decode($data,true);
-	}
-
-	if(! $data) {
-
-		// possible Bleichenbacher's attack, just treat it as a 
-		// message we have no handler for. It should fail a bit 
-		// further along with "no hub". Our public key is public
-		// knowledge. There's no reason why anybody should get the 
-		// encryption wrong unless they're fishing or hacking. If 
-		// they're developing and made a goof, this can be discovered 
-		// in the logs of the destination site. If they're fishing or 
-		// hacking, the bottom line is we can't verify their hub. 
-		// That's all we're going to tell them.
-
-		$data = array('type' => 'bogus');
-	}
-
-
-	$msgtype = ((array_key_exists('type',$data)) ? $data['type'] : '');
-
-	if($msgtype === 'ping') {
-
-		// Useful to get a health check on a remote site.
-		// This will let us know if any important communication details
-		// that we may have stored are no longer valid, regardless of xchan details.
-		logger('POST: got ping send pong now back: ' . z_root() , LOGGER_DEBUG );
- 
-		$ret['success'] = true;
-		$ret['site'] = array();
-		$ret['site']['url'] = z_root();
-		$ret['site']['url_sig'] = base64url_encode(rsa_sign(z_root(),get_config('system','prvkey')));
-		$ret['site']['sitekey'] = get_config('system','pubkey');
-		json_return_and_die($ret);
-	}
-
-
-	if($msgtype === 'pickup') {
-
-		/*
-		 * The 'pickup' message arrives with a tracking ID which is associated with a particular outq_hash
-		 * First verify that that the returned signatures verify, then check that we have an outbound queue item
-		 * with the correct hash.
-		 * If everything verifies, find any/all outbound messages in the queue for this hubloc and send them back
-		 */
-
-		if((! $data['secret']) || (! $data['secret_sig'])) {
-			$ret['message'] = 'no verification signature';
-			logger('mod_zot: pickup: ' . $ret['message'], LOGGER_DEBUG);
-			json_return_and_die($ret);
-		}
-		$r = q("select distinct hubloc_sitekey from hubloc where hubloc_url = '%s' and hubloc_callback = '%s' and hubloc_sitekey != '' group by hubloc_sitekey ",
-			dbesc($data['url']),
-			dbesc($data['callback'])
-		);
-		if(! $r) {
-			$ret['message'] = 'site not found';
-			logger('mod_zot: pickup: ' . $ret['message']);
-			json_return_and_die($ret);
-		}
-
-		foreach ($r as $hubsite) {
+	require_once('Zotlabs/Zot/Receiver.php');
+	require_once('Zotlabs/Zot/ZotHandler.php');
 
-			// verify the url_sig
-			// If the server was re-installed at some point, there could be multiple hubs with the same url and callback.
-			// Only one will have a valid key.
-
-			$forgery = true;
-			$secret_fail = true;
-
-			$sitekey = $hubsite['hubloc_sitekey'];
-
-			logger('mod_zot: Checking sitekey: ' . $sitekey, LOGGER_DATA);
-
-			if(rsa_verify($data['callback'],base64url_decode($data['callback_sig']),$sitekey)) {
-				$forgery = false;
-			}
-			if(rsa_verify($data['secret'],base64url_decode($data['secret_sig']),$sitekey)) {
-				$secret_fail = false;
-			}
-			if((! $forgery) && (! $secret_fail))
-				break;
-		}
-
-		if($forgery) {
-			$ret['message'] = 'possible site forgery';
-			logger('mod_zot: pickup: ' . $ret['message']);
-			json_return_and_die($ret);
-		}
-
-		if($secret_fail) {
-			$ret['message'] = 'secret validation failed';
-			logger('mod_zot: pickup: ' . $ret['message']);
-			json_return_and_die($ret);
-		}
-
-		/*
-		 * If we made it to here, the signatures verify, but we still don't know if the tracking ID is valid.
-		 * It wouldn't be an error if the tracking ID isn't found, because we may have sent this particular
-		 * queue item with another pickup (after the tracking ID for the other pickup  was verified). 
-		 */
-
-		$r = q("select outq_posturl from outq where outq_hash = '%s' and outq_posturl = '%s' limit 1",
-			dbesc($data['secret']),
-			dbesc($data['callback'])
-		);
-		if(! $r) {
-			$ret['message'] = 'nothing to pick up';
-			logger('mod_zot: pickup: ' . $ret['message']);
-			json_return_and_die($ret);
-		}
-
-		/*
-		 * Everything is good if we made it here, so find all messages that are going to this location
-		 * and send them all.
-		 */
-
-		$r = q("select * from outq where outq_posturl = '%s'",
-			dbesc($data['callback'])
-		);
-		if($r) {
-			logger('mod_zot: successful pickup message received from ' . $data['callback'] . ' ' . count($r) . ' message(s) picked up', LOGGER_DEBUG);
-
-			$ret['success'] = true;
-			$ret['pickup'] = array();
-			foreach($r as $rr) {
-				if($rr['outq_msg']) {
-					$x = json_decode($rr['outq_msg'],true);
-
-					if(! $x)
-						continue;
-
-					if(array_key_exists('message_list',$x)) {
-						foreach($x['message_list'] as $xx) {
-							$ret['pickup'][] = array('notify' => json_decode($rr['outq_notify'],true),'message' => $xx);
-						}
-					}
-					else
-						$ret['pickup'][] = array('notify' => json_decode($rr['outq_notify'],true),'message' => $x);
-
-					$x = q("delete from outq where outq_hash = '%s'",
-						dbesc($rr['outq_hash'])
-					);
-				}
-			}
-		}
-
-		$encrypted = crypto_encapsulate(json_encode($ret),$sitekey);
-		json_return_and_die($encrypted);
-
-		/* pickup: end */
-	}
-
-
-	/*
-	 * All other message types require us to verify the sender. This is a generic check, so we 
-	 * will do it once here and bail if anything goes wrong.
-	 */
-
-	if (array_key_exists('sender',$data)) {
-		$sender = $data['sender'];
-	}
-
-	/* Check if the sender is already verified here */
-
-	$hubs = zot_gethub($sender,true);
-
-	if (! $hubs) {
-
-		/* Have never seen this guid or this guid coming from this location. Check it and register it. */
-
-		// (!!) this will validate the sender
-		$result = zot_register_hub($sender);
-
-		if ((! $result['success']) || (! ($hubs = zot_gethub($sender,true)))) {
-			$ret['message'] = 'Hub not available.';
-			logger('mod_zot: no hub');
-			json_return_and_die($ret);
-		}
-	}
-
-
-	foreach($hubs as $hub) {
-
-		$sitekey = $hub['hubloc_sitekey'];
-
-		if(array_key_exists('sitekey',$sender) && $sender['sitekey']) {
-
-			/*
-			 * This hub has now been proven to be valid.
-			 * Any hub with the same URL and a different sitekey cannot be valid.
-			 * Get rid of them (mark them deleted). There's a good chance they were re-installs.
-			 */
+	$z = new Zotlabs\Zot\Receiver($_REQUEST['data'],get_config('system','prvkey'), new Zotlabs\Zot\ZotHandler());
 	
-			q("update hubloc set hubloc_deleted = 1, hubloc_error = 1 where hubloc_url = '%s' and hubloc_sitekey != '%s' ",
-				dbesc($hub['hubloc_url']),
-				dbesc($sender['sitekey'])
-			);
-
-			$sitekey = $sender['sitekey'];
-		}
-
-		// $sender['sitekey'] is a new addition to the protcol to distinguish 
-		// hublocs coming from re-installed sites. Older sites will not provide
-		// this field and we have to still mark them valid, since we can't tell
-		// if this hubloc has the same sitekey as the packet we received.
-
-
-		// Update our DB to show when we last communicated successfully with this hub
-		// This will allow us to prune dead hubs from using up resources
-
-		$r = q("update hubloc set hubloc_connected = '%s' where hubloc_id = %d and hubloc_sitekey = '%s' ",
-			dbesc(datetime_convert()),
-			intval($hub['hubloc_id']),
-			dbesc($sitekey)
-		);
-
-		// a dead hub came back to life - reset any tombstones we might have
-
-		if(intval($hub['hubloc_error'])) {
-			q("update hubloc set hubloc_error = 0 where hubloc_id = %d and hubloc_sitekey = '%s' ",
-				intval($hub['hubloc_id']),
-				dbesc($sitekey)		
-			);
-			if(intval($r[0]['hubloc_orphancheck'])) {
-				q("update hubloc set hubloc_orhpancheck = 0 where hubloc_id = %d and hubloc_sitekey = '%s' ",
-					intval($hub['hubloc_id']),
-					dbesc($sitekey)
-				);
-			}
-			q("update xchan set xchan_orphan = 0 where xchan_orphan = 1 and xchan_hash = '%s'",
-				dbesc($hub['hubloc_hash'])
-			);
-		}
-		
-		$connecting_url = $hub['hubloc_url'];
-	}
-
-
-	/** @TODO check which hub is primary and take action if mismatched */
-
-	if (array_key_exists('recipients', $data))
-		$recipients = $data['recipients'];
-
+	// notreached;
 
-	if ($msgtype === 'auth_check') {
-
-		/*
-		 * Requestor visits /magic/?dest=somewhere on their own site with a browser
-		 * magic redirects them to $destsite/post [with auth args....]
-		 * $destsite sends an auth_check packet to originator site
-		 * The auth_check packet is handled here by the originator's site 
-		 * - the browser session is still waiting
-		 * inside $destsite/post for everything to verify
-		 * If everything checks out we'll return a token to $destsite
-		 * and then $destsite will verify the token, authenticate the browser
-		 * session and then redirect to the original destination.
-		 * If authentication fails, the redirection to the original destination
-		 * will still take place but without authentication.
-		 */
-		logger('mod_zot: auth_check', LOGGER_DEBUG);
-
-		if (! $encrypted_packet) {
-			logger('mod_zot: auth_check packet was not encrypted.');
-			$ret['message'] .= 'no packet encryption' . EOL;
-			json_return_and_die($ret);
-		}
-
-		$arr = $data['sender'];
-		$sender_hash = make_xchan_hash($arr['guid'],$arr['guid_sig']);
-
-		// garbage collect any old unused notifications
-
-		// This was and should be 10 minutes but my hosting provider has time lag between the DB and 
-		// the web server. We should probably convert this to webserver time rather than DB time so 
-		// that the different clocks won't affect it and allow us to keep the time short. 
-
-		q("delete from verify where type = 'auth' and created < %s - INTERVAL %s",
-			db_utcnow(), db_quoteinterval('30 MINUTE')
-		);
-
-		$y = q("select xchan_pubkey from xchan where xchan_hash = '%s' limit 1",
-			dbesc($sender_hash)
-		);
-
-		// We created a unique hash in mod/magic.php when we invoked remote auth, and stored it in
-		// the verify table. It is now coming back to us as 'secret' and is signed by a channel at the other end.
-		// First verify their signature. We will have obtained a zot-info packet from them as part of the sender
-		// verification. 
-
-		if ((! $y) || (! rsa_verify($data['secret'], base64url_decode($data['secret_sig']),$y[0]['xchan_pubkey']))) {
-			logger('mod_zot: auth_check: sender not found or secret_sig invalid.');
-			$ret['message'] .= 'sender not found or sig invalid ' . print_r($y,true) . EOL;
-			json_return_and_die($ret);
-		}
-
-		// There should be exactly one recipient, the original auth requestor
-
-		$ret['message'] .= 'recipients ' . print_r($recipients,true) . EOL;
-
-		if ($data['recipients']) {
-
-			$arr = $data['recipients'][0];
-			$recip_hash = make_xchan_hash($arr['guid'], $arr['guid_sig']);
-			$c = q("select channel_id, channel_account_id, channel_prvkey from channel where channel_hash = '%s' limit 1",
-				dbesc($recip_hash)
-			);
-			if (! $c) {
-				logger('mod_zot: auth_check: recipient channel not found.');
-				$ret['message'] .= 'recipient not found.' . EOL;
-				json_return_and_die($ret);
-			}
-
-			$confirm = base64url_encode(rsa_sign($data['secret'] . $recip_hash,$c[0]['channel_prvkey']));
-
-			// This additionally checks for forged sites since we already stored the expected result in meta
-			// and we've already verified that this is them via zot_gethub() and that their key signed our token
-
-			$z = q("select id from verify where channel = %d and type = 'auth' and token = '%s' and meta = '%s' limit 1",
-				intval($c[0]['channel_id']),
-				dbesc($data['secret']),
-				dbesc($data['sender']['url'])
-			);
-			if (! $z) {
-				logger('mod_zot: auth_check: verification key not found.');
-				$ret['message'] .= 'verification key not found' . EOL;
-				json_return_and_die($ret);
-			}
-			$r = q("delete from verify where id = %d",
-				intval($z[0]['id'])
-			);
-
-			$u = q("select account_service_class from account where account_id = %d limit 1",
-				intval($c[0]['channel_account_id'])
-			);
-
-			logger('mod_zot: auth_check: success', LOGGER_DEBUG);
-			$ret['success'] = true;
-			$ret['confirm'] = $confirm;
-			if ($u && $u[0]['account_service_class'])
-				$ret['service_class'] = $u[0]['account_service_class'];
-
-			// Set "do not track" flag if this site or this channel's profile is restricted
-			// in some way
-
-			if (intval(get_config('system','block_public')))
-				$ret['DNT'] = true;
-			if (! perm_is_allowed($c[0]['channel_id'],'','view_profile'))
-				$ret['DNT'] = true;
-			if (get_pconfig($c[0]['channel_id'],'system','do_not_track'))
-				$ret['DNT'] = true;
-			if (get_pconfig($c[0]['channel_id'],'system','hide_online_status'))
-				$ret['DNT'] = true;
-
-			json_return_and_die($ret);
-		}
-		json_return_and_die($ret);
-	}
-
-	if ($msgtype === 'request') {
-		// request a particular post/conversation by message_id
-		$x = zot_process_message_request($data);
-		json_return_and_die($x);		
-	}
-
-	if ($msgtype === 'purge') {
-		if ($recipients) {
-			// basically this means "unfriend"
-			foreach ($recipients as $recip) {
-				$r = q("select channel.*,xchan.* from channel 
-					left join xchan on channel_hash = xchan_hash
-					where channel_guid = '%s' and channel_guid_sig = '%s' limit 1",
-					dbesc($recip['guid']),
-					dbesc($recip['guid_sig'])
-				);
-				if ($r) {
-					$r = q("select abook_id from abook where uid = %d and abook_xchan = '%s' limit 1",
-						intval($r[0]['channel_id']),
-						dbesc(make_xchan_hash($sender['guid'],$sender['guid_sig']))
-					);
-					if ($r) {
-						contact_remove($r[0]['channel_id'],$r[0]['abook_id']);
-					}
-				}
-			}
-		} else {
-			// Unfriend everybody - basically this means the channel has committed suicide
-			$arr = $data['sender'];
-			$sender_hash = make_xchan_hash($arr['guid'],$arr['guid_sig']);
-
-			require_once('include/Contact.php');
-			remove_all_xchan_resources($sender_hash);	
-
-			$ret['success'] = true;
-			json_return_and_die($ret);
-		}
-	}
-
-	if (($msgtype === 'refresh') || ($msgtype === 'force_refresh')) {
-
-		// remote channel info (such as permissions or photo or something)
-		// has been updated. Grab a fresh copy and sync it.
-		// The difference between refresh and force_refresh is that 
-		// force_refresh unconditionally creates a directory update record,
-		// even if no changes were detected upon processing.
-
-		if ($recipients) {
-
-			// This would be a permissions update, typically for one connection
-
-			foreach ($recipients as $recip) {
-				$r = q("select channel.*,xchan.* from channel 
-					left join xchan on channel_hash = xchan_hash
-					where channel_guid = '%s' and channel_guid_sig = '%s' limit 1",
-					dbesc($recip['guid']),
-					dbesc($recip['guid_sig'])
-				);
-
-				$x = zot_refresh(array(
-						'xchan_guid'     => $sender['guid'], 
-						'xchan_guid_sig' => $sender['guid_sig'],
-						'hubloc_url'     => $sender['url']
-				), $r[0], (($msgtype === 'force_refresh') ? true : false));
-			}
-		} else {
-
-			// system wide refresh
-
-			$x = zot_refresh(array(
-				'xchan_guid'     => $sender['guid'], 
-				'xchan_guid_sig' => $sender['guid_sig'],
-				'hubloc_url'     => $sender['url']
-			), null, (($msgtype === 'force_refresh') ? true : false));
-		}
-		$ret['success'] = true;
-		json_return_and_die($ret);
-	}
-
-	if ($msgtype === 'notify') {
-
-		logger('notify received from ' . $connecting_url);
-
-
-		$async = get_config('system','queued_fetch');
-
-		if ($async) {
-			// add to receive queue
-			// qreceive_add($data);
-		} else {
-			$x = zot_fetch($data);
-			$ret['delivery_report'] = $x;
-		}
-
-		$ret['success'] = true;
-		json_return_and_die($ret);
-	}
+	exit;
 
-	// catchall
-	json_return_and_die($ret);
 }