2 files changed, 144 insertions, 0 deletions
diff --git a/spec/dummy b/spec/dummy
deleted file mode 160000
-Subproject 36f851b7d5eca685475eb3a232e1d8dabfb1653
diff --git a/spec/dummy/config/initializers/devise.rb b/spec/dummy/config/initializers/devise.rb
new file mode 100644
index 0000000..0d00106
--- /dev/null
+++ b/spec/dummy/config/initializers/devise.rb
@@ -0,0 +1,144 @@
+require 'devise'
+
+# Use this hook to configure devise mailer, warden hooks and so forth. The first
+# four configuration values can also be set straight in your models.
+::Devise.setup do |config|
+  # ==> Mailer Configuration
+  # Configure the e-mail address which will be shown in DeviseMailer.
+  # config.mailer_sender = "please-change-me@config-initializers-devise.com"
+
+  # Configure the class responsible to send e-mails.
+  # config.mailer = "::Devise::Mailer"
+
+  # ==> ORM configuration
+  # Load and configure the ORM. Supports :active_record (default) and
+  # :mongoid (bson_ext recommended) by default. Other ORMs may be
+  # available as additional gems.
+  require 'devise/orm/active_record'
+
+  # ==> Configuration for any authentication mechanism
+  # Configure which keys are used when authenticating an user. By default is
+  # just :email. You can configure it to use [:username, :subdomain], so for
+  # authenticating an user, both parameters are required. Remember that those
+  # parameters are used only when authenticating and not when retrieving from
+  # session. If you need permissions, you should implement that in a before filter.
+  config.authentication_keys = [ :login ]
+
+  # Tell if authentication through request.params is enabled. True by default.
+  # config.params_authenticatable = true
+
+  # Tell if authentication through HTTP Basic Auth is enabled. False by default.
+  # config.http_authenticatable = false
+
+  # Set this to true to use Basic Auth for AJAX requests.  True by default.
+  # config.http_authenticatable_on_xhr = true
+
+  # The realm used in Http Basic Authentication
+  # config.http_authentication_realm = "Application"
+
+  # ==> Configuration for :database_authenticatable
+  # For bcrypt, this is the cost for hashing the password and defaults to 10. If
+  # using other encryptors, it sets how many times you want the password re-encrypted.
+  # config.stretches = 20
+
+  # Define which will be the encryption algorithm. Devise also supports encryptors
+  # from others authentication tools as :clearance_sha1, :authlogic_sha512 (then
+  # you should set stretches above to 20 for default behavior) and :restful_authentication_sha1
+  # (then you should set stretches to 10, and copy REST_AUTH_SITE_KEY to pepper)
+  # config.encryptor = :bcrypt
+
+  # Setup a pepper to generate the encrypted password.
+  # config.pepper = "2e20a8abdd34d729ba6d05f679e513cfea9fbb1e83c81f84b29e9e4fdbd4ee59b56a32200064082a15a72b05a4d4a6a2c3784a09c0554b3a47a67cc8333ccbc7"
+
+  # ==> Configuration for :confirmable
+  # The time you want to give your user to confirm his account. During this time
+  # he will be able to access your application without confirming. Default is nil.
+  # When confirm_within is zero, the user won't be able to sign in without confirming.
+  # You can use this to let your user access some features of your application
+  # without confirming the account, but blocking it after a certain period
+  # (ie 2 days).
+  # config.confirm_within = 2.days
+
+  # ==> Configuration for :rememberable
+  # The time the user will be remembered without asking for credentials again.
+  # config.remember_for = 2.weeks
+
+  # If true, a valid remember token can be re-used between multiple browsers.
+  # config.remember_across_browsers = true
+
+  # If true, extends the user's remember period when remembered via cookie.
+  # config.extend_remember_period = false
+
+  # ==> Configuration for :validatable
+  # Range for password length
+  config.password_length = 4..20
+
+  # Regex to use to validate the email address
+  # config.email_regexp = /^([\w\.%\+\-]+)@([\w\-]+\.)+([\w]{2,})$/i
+
+  # ==> Configuration for :timeoutable
+  # The time you want to timeout the user session without activity. After this
+  # time the user will be asked for credentials again.
+  # config.timeout_in = 10.minutes
+
+  # ==> Configuration for :lockable
+  # Defines which strategy will be used to lock an account.
+  # :failed_attempts = Locks an account after a number of failed attempts to sign in.
+  # :none            = No lock strategy. You should handle locking by yourself.
+  # config.lock_strategy = :failed_attempts
+
+  # Defines which strategy will be used to unlock an account.
+  # :email = Sends an unlock link to the user email
+  # :time  = Re-enables login after a certain amount of time (see :unlock_in below)
+  # :both  = Enables both strategies
+  # :none  = No unlock strategy. You should handle unlocking by yourself.
+  # config.unlock_strategy = :both
+
+  # Number of authentication tries before locking an account if lock_strategy
+  # is failed attempts.
+  # config.maximum_attempts = 20
+
+  # Time interval to unlock the account if :time is enabled as unlock_strategy.
+  # config.unlock_in = 1.hour
+
+  # ==> Configuration for :token_authenticatable
+  # Defines name of the authentication token params key
+  # config.token_authentication_key = :auth_token
+
+  # ==> Scopes configuration
+  # Turn scoped views on. Before rendering "sessions/new", it will first check for
+  # "users/sessions/new". It's turned off by default because it's slower if you
+  # are using only default views.
+  # config.scoped_views = true
+
+  # Configure the default scope given to Warden. By default it's the first
+  # devise role declared in your routes.
+  # config.default_scope = :user
+
+  # Configure sign_out behavior.
+  # By default sign_out is scoped (i.e. /users/sign_out affects only :user scope).
+  # In case of sign_out_all_scopes set to true any logout action will sign out all active scopes.
+  # config.sign_out_all_scopes = false
+
+  # ==> Navigation configuration
+  # Lists the formats that should be treated as navigational. Formats like
+  # :html, should redirect to the sign in page when the user does not have
+  # access, but formats like :xml or :json, should return 401.
+  # If you have any extra navigational formats, like :iphone or :mobile, you
+  # should add them to the navigational formats lists. Default is [:html]
+  # config.navigational_formats = [:html, :iphone]
+
+  # ==> Warden configuration
+  # If you want to use other strategies, that are not (yet) supported by Devise,
+  # you can configure them inside the config.warden block. The example below
+  # allows you to setup OAuth, using http://github.com/roman/warden_oauth
+  #
+  # config.warden do |manager|
+  #   manager.oauth(:twitter) do |twitter|
+  #     twitter.consumer_secret = <YOUR CONSUMER SECRET>
+  #     twitter.consumer_key  = <YOUR CONSUMER KEY>
+  #     twitter.options :site => 'http://twitter.com'
+  #   end
+  #   manager.default_strategies(:scope => :user).unshift :twitter_oauth
+  # end
+end