aboutsummaryrefslogtreecommitdiffstats
path: root/railties
Commit message (Collapse)AuthorAgeFilesLines
* Merge pull request #32271 from eileencodes/fix-three-tier-default-connectionEileen M. Uchitelle2018-03-161-1/+1
|\ | | | | Fix default connection handling with three-tier config
| * Switch dbconsole config loader checkeileencodes2018-03-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | In a three-tier config environment `configurations[environment].presence` will return `{ :primary => { :key => value, :key => value }, :secondary => { :key => value, :key => value} }, which means it's not given a single config to connect to. If we flip these however it will connect to primary because that's the default connection, and on a two tier it will be `nil` so the code will select the connection from the configurations rather than the connection.
* | Pass the skip_pipeline option in image_submit_tagAndrew White2018-03-141-1/+2
| | | | | | | | Fixes #32248.
* | Rely on Rails::Command's help output.Kasper Timm Hansen2018-03-132-72/+63
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We end up with: ``` Usage: bin/rails routes [options] Options: -c, [--controller=CONTROLLER] # Filter by a specific controller, e.g. PostsController or Admin::PostsController. -g, [--grep=GREP] # Grep routes by a specific pattern. -E, [--expanded], [--no-expanded] # Print routes expanded vertically with parts explained. ``` which does miss the bit about routes being printed in order. Also: * Renames options to ease help output readability, then clarifies each option. * Fixes a bunch of indentation.
* | Extract details to methods to clarify command.Kasper Timm Hansen2018-03-131-8/+12
| |
* | Remove changelog header for unreleased versionRafael Mendonça França2018-03-131-2/+0
| | | | | | | | | | | | We only add the header when releasing to avoid some conflicts. [ci skip]
* | Introduce `ActionDispatch::Routing::ConsoleFormatter::Base`bogdanvlviv2018-03-131-7/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | - Create `Base` and inherit `Sheet` and `Expanded` in order to - prevent code duplication. - Remove trailing "\n" for components of `Expanded`. - There is no need for `Expanded#header` to return `@buffer` so return `nil` instead. - Change `no_routes` message "No routes were found for this controller" since if use `-g`, it sounds incorrect. - Display `No routes were found for this controller.` if apply `-c`. - Display `No routes were found for this grep pattern.` if apply `-g`. Related to #32130
* | Remove path option from AzureStorage configYuji Yaginuma2018-03-131-1/+0
| | | | | | | | Follow up of 309bb6c4d068b0d480681cf4ef1b90158527dfe5
* | Merge pull request #32160 from bogdanvlviv/improve-rails-routes-expandedKasper Timm Hansen2018-03-111-38/+47
|\ \ | | | | | | Draw line of a route name to the end of row console on `rails routes --expanded`
| * | Draw line of a route name to the end of row console on `rails routes --expanded`bogdanvlviv2018-03-051-38/+47
| | | | | | | | | | | | | | | | | | | | | In order to get width of console use `IO::console_size`, See https://ruby-doc.org/stdlib-2.4.1/libdoc/io/console/rdoc/IO.html#method-c-console_size Related to #32130
* | | Do not show unnecessary message during server startupyuuji.yaginuma2018-03-101-6/+5
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, `Exiting` is showed during server startup. ``` ./bin/rails s => Booting Puma => Rails 6.0.0.alpha application starting in development => Run `rails server --help` for more startup options Exiting Puma starting in single mode... * Version 3.11.2 (ruby 2.5.0-p0), codename: Love Song ``` This is because processing at server stop is passed as a block, and `Rack::Serve#start` receives a block and executes it during startup processing. https://github.com/rack/rack/blob/50db1ffdf8b98503fb7c6e6648622b5d7d78d58e/lib/rack/server.rb#L258 In order to avoid this, stop processing is passed as argument.
* | Always yield a CSP policy instanceAndrew White2018-03-081-4/+2
| | | | | | | | | | If the app has the CSP disabled globally allow a controller action to enable the policy for that request.
* | Allow using inline style and script in the internal controllersyuuji.yaginuma2018-03-081-0/+13
| | | | | | | | | | | | | | | | | | | | We use inline style and script for the view held inside Rails like welcome page and mailer preview. Therefore, if inline is prohibited by CSP, they will not work properly. I think that this is not as expected.   For that reason, I have made it possible to use inline style and script regardless of application settings.
* | Allow Capybara 3.x (#32151)Thomas Walpole2018-03-051-1/+1
| |
* | Merge pull request #32174 from ↵Ryuta Kamizono2018-03-061-1/+1
|\ \ | | | | | | | | | | | | bogdanvlviv/remove-extra-passing-arg-to-run_routes_command Remove extra arg passed to `Rails::Command::RoutesTest#run_routes_command`
| * | Remove extra arg passed to `Rails::Command::RoutesTest#run_routes_command`bogdanvlviv2018-03-051-1/+1
| |/ | | | | | | Related to 6bd33d66dde015a55912af20b469788ba20ddb4e
* | Merge pull request #32170 from koic/deprecate_safe_level_of_erb_new_in_ruby_2_6Ryuta Kamizono2018-03-051-1/+6
|\ \ | |/ |/| Deprecate safe_level of `ERB.new` in Ruby 2.6
| * Deprecate safe_level of `ERB.new` in Ruby 2.6Koichi ITO2018-03-051-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ### Summary In a Rails application using Ruby 2.6.0-dev, when running `bin/rails g migration` with `RUBYOPT=-w`, an ERB deprecation warnings will be displayed. ```console % ruby -v ruby 2.6.0dev (2018-03-03 trunk 62644) [x86_64-darwin17] % bin/rails -v Rails 6.0.0.alpha % RUBYOPT=-w bin/rails g migration create_foos (snip) /Users/koic/src/github.com/rails/rails/railties/lib/rails/generators/migration.rb:66: warning: Passing safe_level with the 2nd argument of ERB.new is deprecated. Do not use it, and specify other arguments as keyword arguments. /Users/koic/src/github.com/rails/rails/railties/lib/rails/generators/migration.rb:66: warning: Passing trim_mode with the 3rd argument of ERB.new is deprecated. Use keyword argument like ERB.new(str, trim_mode: ...) instead. /Users/koic/src/github.com/rails/rails/railties/lib/rails/generators/migration.rb:66: warning: Passing eoutvar with the 4th argument of ERB.new is deprecated. Use keyword argument like ERB.new(str, eoutvar: ...) instead. create db/migrate/20180304002144_create_foos.rb ``` This PR suppresses the above deprecation warnings in Ruby 2.6.0-dev. This warning is due to the interface of `ERB.new` will change from Ruby 2.6. > Add :trim_mode and :eoutvar keyword arguments to ERB.new. > Now non-keyword arguments other than first one are softly deprecated > and will be removed when Ruby 2.5 becomes EOL. [Feature #14256] https://github.com/ruby/ruby/blob/2311087b685e8dc0f21f4a89875f25c22f5c39a9/NEWS#stdlib-updates-outstanding-ones-only The following addresses are related Ruby's commit. https://github.com/ruby/ruby/commit/cc777d0 Also this PR will change `ERB.new` used in `tasks/release.rb`. ### Other Information This PR uses `ERB.version` to switch `ERB.new` interface. Because Rails 6 supports multiple Ruby versions (Ruby 2.4.1 or higher), it need to use the appropriate interface. Using `ERB.version` instead of `RUBY_VERSON` is based on the following patch. https://github.com/ruby/ruby/pull/1826 This patch is built into Ruby. https://github.com/ruby/ruby/commit/40db89c0934c23d7464d47946bb682b9035411f9
* | Fix "NameError: undefined local variable or method `host'"yuuji.yaginuma2018-03-052-1/+7
| | | | | | | | The `host` and `port` can't use this context.
* | Merge pull request #32058 from gsamokovarov/rails-server-x-optionKasper Timm Hansen2018-03-048-61/+184
|\ \ | | | | | | Introduce explicit rails server handler option
| * | Extract Rails::Command::SpellcheckerGenadi Samokovarov2018-03-045-41/+65
| | |
| * | Introduce explicit rails server handler optionGenadi Samokovarov2018-03-043-20/+119
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I mistype `rails server production` instead of `rails server -e production` expecting to lunch a server in the production environment all the time. However, the signature of `rails server --help` is: ``` Usage: rails server [puma, thin etc] [options] ``` This means that the `production` argument is being interpreted as a Rack server handler like Puma, Thin or Unicorn. Should we argue for the `rails server production`? I'm not sure of the reasons, but the `rails console production` behavior was deprecated in: https://github.com/rails/rails/pull/29358, so parity with the existing `rails console production` usage may not hold anymore. In any case, this PR introduces an explicit option for the Rack servers configuration. The option is called `--using` (or `-u` for short) to avoid the `rails server --server` tantrum. The new interface of `rails server` is: ``` Usage: rails server [using] [options] Options: -p, [--port=port] # Runs Rails on the specified port - defaults to 3000. -b, [--binding=IP] # Binds Rails to the specified IP - defaults to 'localhost' in development and '0.0.0.0' in other environments'. -c, [--config=file] # Uses a custom rackup configuration. # Default: config.ru -d, [--daemon], [--no-daemon] # Runs server as a Daemon. -e, [--environment=name] # Specifies the environment to run this server under (development/test/production). -u, [--using=name] # Specifies the Rack server used to run the application (thin/puma/webrick). -P, [--pid=PID] # Specifies the PID file. # Default: tmp/pids/server.pid -C, [--dev-caching], [--no-dev-caching] # Specifies whether to perform caching in development. [--early-hints], [--no-early-hints] # Enables HTTP/2 early hints. ``` As a bonus, if you mistype the server to use, you'll get an auto-correction message: ``` $ rails s tin Could not find handler "tin". Maybe you meant "thin" or "cgi"? Run `rails server --help` for more options. ```
* / Fix routes command tests broken in e137831726.Kasper Timm Hansen2018-03-041-23/+16
|/
* Clean up `RoutesTest` a bityuuji.yaginuma2018-03-011-8/+6
| | | | | | * Remove unused require * Remove redundant `test` * Change `rake` to `rails`
* Merge pull request #32130 from benoittgt/rake-routes-compact-modeRafael França2018-02-284-41/+73
|\ | | | | Add "rails routes --expanded" mode
| * Add --expanded option to "rails routes"Benoit Tigeot2018-02-284-41/+73
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When using rails routes with small terminal or complicated routes it can be very difficult to understand where is the element listed in header. psql had the same issue, that's why they created "expanded mode" you can switch using `\x` or by starting psql with ``` -x --expanded Turn on the expanded table formatting mode. This is equivalent to the \x command. ``` The output is similar to one implemented here for rails routes: db_user-# \du List of roles -[ RECORD 1 ]---------------------------------------------- Role name | super Attributes | Superuser, Create role, Create DB Member of | {} -[ RECORD 2 ]---------------------------------------------- Role name | role Attributes | Superuser, Create role, Create DB, Replication Member of | {}
* | Fix `new_framework_defaults_6_0.rb`bogdanvlviv2018-02-271-1/+1
|/ | | | | | | | | `default_enforce_utf8` belongs to `config.action_view` Update info about `:skip_enforcing_utf8` since we can change default behavior via `config.action_controller.default_enforce_utf8` Related to #32125
* Merge pull request #32121 from benoittgt/move-rails-routes-to-rails-commandRafael França2018-02-275-143/+170
|\ | | | | Move rake routes task to rails command
| * Move rake routes task to rails commandBenoit Tigeot2018-02-275-143/+170
| | | | | | | | | | | | After a discussion with matthewd. It was mentioned that rake tasks need to be moved to rails command. See: https://github.com/rails/rails/issues/32117
* | Don't enforce UTF-8 by defaultAndrew White2018-02-276-39/+48
|/ | | | | | With the disabling of TLS 1.0 by most major websites, continuing to run IE8 or lower becomes increasingly difficult so default to not enforcing UTF-8 encoding as it's not relevant to other browsers.
* Remove changelogs for Rails 6.0 since they were backported to `5-2-stable`bogdanvlviv2018-02-261-8/+0
| | | | | | | | | | | | | | | | Remove railties' changelog added by 7340596de45dc4c0f62a287b6acc4e71d8ee6c60 since it was backported to `5-2-stable` via ac99916fcf7bf27bb1519d4f7387c6b4c5f0463d Remove activesupport's changelog added by 1077ae96b34b5a1dfbf10ee0c40b1ceb1eb6b30b since it was backported to `5-2-stable` via a2b97e4ffef971607a1be8fc7909f099b6840f36 Remove activesupport's changelog added by 0d41a76d0c693000005d79456dee7f9299f5e8d4 since it was backported to `5-2-stable` via cdce6a709e1cbc98fff009effc3b1b3ce4c7e8db Remove activestorage's changelog added by d57c52a385eb57c6ce8c6d124ab5e186f931d142 since it was backported to `5-2-stable` via 5292cdf59a2052c453d6016c69b90b790cbf2547 Follow up c113bdc9d0c2cffd535ca97aff85c4bdc46b11f6
* Use lazy load hook to configure ActiveStorage::BlobEugene Kenny2018-02-251-0/+12
| | | | | | | | | `to_prepare` callbacks are run during initialization; using one here meant that `ActiveStorage::Blob` would be loaded when the app boots, which would in turn load `ActiveRecord::Base`. By using a lazy load hook to configure `ActiveStorage::Blob` instead, we can avoid loading `ActiveRecord::Base` unnecessarily.
* [ci skip] Spell out the full variable in generated code.Kasper Timm Hansen2018-02-241-1/+1
|
* Correctly set `content_security_policy_nonce_generator`yuuji.yaginuma2018-02-241-1/+1
| | | | | | | `content_security_policy_nonce_generator` specifies request as an argument when calling. https://github.com/rails/rails/blob/ddb7da8535b07f51b7a8f5e3062cc8ffbd4ff23b/actionpack/lib/action_dispatch/http/content_security_policy.rb#L100 So without this fix, will raise `ArgumentError` when start server.
* Improve generated file `app/assets/javascripts/application.js` of pluginbogdanvlviv2018-02-232-1/+6
| | | | | | Add `//= require rails-ujs` Closes #32094
* Merge pull request #32089 from bogdanvlviv/fix-plugin-generated-filesRafael França2018-02-223-3/+17
|\ | | | | Fix plugin generated files
| * Improve generated file `app/views/application.html.erb` of pluginbogdanvlviv2018-02-232-1/+14
| | | | | | | | | | - Do not generate `javascript_include_tag` if `--skip-javascript` - Generate `<%= csp_meta_tag %>`. Related to #32018.
| * Comment `require "active_storage/engine"` in `bin/rails` of plugin if ↵bogdanvlviv2018-02-232-2/+3
| | | | | | | | `--skip-active-storage`
* | Revert "Merge pull request #32075 from eileencodes/delete-default-configuration"eileencodes2018-02-221-1/+0
| | | | | | | | | | | | | | | | | | | | This reverts commit 16f279ebd474626577ced858e3626ac4535a33df, reversing changes made to 6c6a30a7c357ce1eafa093d77d2b08684fe50887. The config can be named anything, not just default (although all generated apps will be named default). We can't just delete configs that don't have a database because that will break three-tier configs. Oh well.
* | Revert "Reject empty database yamls"eileencodes2018-02-221-1/+1
|/ | | | | | | | | | | | This reverts commit 0979713abe2e22083e1beca01a1d113408c9ab36. I originally wanted to delete the default config but found out it can be called anything which means the code would blow up in unexpected ways. I thought "cool ill just delete the configs without dbs" and realized that totally 100% breaks the three-tier config. So I'm reverting this and the other commit.
* Merge pull request #32018 from rails/add-nonce-support-to-cspAndrew White2018-02-224-39/+45
|\ | | | | Add support for automatic nonce generation for Rails UJS
| * Add support for automatic nonce generation for Rails UJSAndrew White2018-02-194-39/+45
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Because the UJS library creates a script tag to process responses it normally requires the script-src attribute of the content security policy to include 'unsafe-inline'. To work around this we generate a per-request nonce value that is embedded in a meta tag in a similar fashion to how CSRF protection embeds its token in a meta tag. The UJS library can then read the nonce value and set it on the dynamically generated script tag to enable it to execute without needing 'unsafe-inline' enabled. Nonce generation isn't 100% safe - if your script tag is including user generated content in someway then it may be possible to exploit an XSS vulnerability which can take advantage of the nonce. It is however an improvement on a blanket permission for inline scripts. It is also possible to use the nonce within your own script tags by using `nonce: true` to set the nonce value on the tag, e.g <%= javascript_tag nonce: true do %> alert('Hello, World!'); <% end %> Fixes #31689.
* | Reject empty database yamlseileencodes2018-02-221-1/+1
| | | | | | | | | | | | | | | | In #32075 I deleted the default configuration since that's what's generated with the Rails app. Since someone could change the default name instead delete any config that doesn't have a database so we can avoid peppering our Rails tasks with conditionals to deal with invalid database configs.
* | Add cop for preferring 'Foo.method' over 'Foo::method'Andrew White2018-02-222-2/+2
| |
* | Do not add routes when actions are not specifiedYuji Yaginuma2018-02-222-0/+8
| | | | | | | | | | | | | | | | | | | | Since #30241, if namepsace is specified, routes will be generated even if there is no actions. However, it seems that this behavior is not intentionally added behavior. As with 5.1, routes should not be generated if actions are not specified. Fixes #32072.
* | Merge pull request #32075 from eileencodes/delete-default-configurationEileen M. Uchitelle2018-02-211-0/+1
|\ \ | | | | | | Delete default configuration
| * | Delete default configurationeileencodes2018-02-211-0/+1
| | | | | | | | | | | | | | | | | | | | | Because of this default configuration we're constantly checking if the database exists when looping through configurations. This is unnecessary and we should just delete it before we need to loop through configurations.
* | | Ensure that `mini_magick` is absent after `rails new` with ↵bogdanvlviv2018-02-201-8/+9
| |/ |/| | | | | | | | | | | | | | | | | `--skip-active-storage` Remove redundant assertions of an absence of `mini_magick` in `Gemfile` since `bin/rails app:update` does not update Gemfile. This assertions was added by 4a835aa3236eedb135ccf8b59ed3c03e040b8b01, after reviewing of https://github.com/rails/rails/pull/32049 i realized that assertions are redundant.
* | Remove trailing semi-colon from CSPAndrew White2018-02-191-6/+6
| | | | | | | | | | | | | | | | | | Although the spec[1] is defined in such a way that a trailing semi-colon is valid it also doesn't allow a semi-colon by itself to indicate an empty policy. Therefore it's easier (and valid) just to omit it rather than to detect whether the policy is empty or not. [1]: https://www.w3.org/TR/CSP2/#policy-syntax
* | Don't accidentally create an empty CSPAndrew White2018-02-192-3/+33
| | | | | | | | | | | | Setting up the request environment was accidentally creating a CSP as a consequence of accessing the option - only set the instance variable if a block is passed.