aboutsummaryrefslogtreecommitdiffstats
path: root/railties/test/application/rake/dbs_test.rb
Commit message (Collapse)AuthorAgeFilesLines
* applies new string literal convention in railties/testXavier Noria2016-08-061-32/+32
| | | | | The current code base is not uniform. After some discussion, we have chosen to go with double quotes by default.
* Remove unused boot_rails method and it's usagePrathamesh Sonpatki2016-07-041-1/+0
| | | | | - The `boot_rails` method from abstract_unit.rb is empty after 2abcdfd978fdcd491576a237e8c6b. - So let's remove it and its usage.
* Fixed assertions with regex used in dbs testsVipul A M2016-04-191-2/+2
|
* Added notice when a database is successfully created or dropped.bogdanvlviv2016-04-171-2/+2
|
* Shorten ActiveRecord::InternalMetadata.table_name to ar_internal_metadataYasuo Honda2016-02-011-2/+2
| | | | to support Oracle database which only supports 30 byte identifier length
* Be consistent in testing outputs from railties test and use /bin/rails ↵Vipul A M2016-01-241-21/+21
| | | | | | everywhere(the default behaviour now) instead of mix of /bin/rake /bin/rails everywhere [Ryo Hashimoto & Vipul A M]
* Fixing tests and re-locating error checking.schneems2016-01-081-2/+2
|
* Prevent destructive action on production databaseschneems2016-01-071-3/+3
| | | | | | | This PR introduces a key/value type store to Active Record that can be used for storing internal values. It is an alternative implementation to #21237 cc @sgrif @matthewd. It is possible to run your tests against your production database by accident right now. While infrequently, but as an anecdotal data point, Heroku receives a non-trivial number of requests for a database restore due to this happening. In these cases the loss can be large. To prevent against running tests against production we can store the "environment" version that was used when migrating the database in a new internal table. Before executing tests we can see if the database is a listed in `protected_environments` and abort. There is a manual escape valve to force this check from happening with environment variable `DISABLE_DATABASE_ENVIRONMENT_CHECK=1`.
* Remove warningsRafael Mendonça França2015-12-041-4/+4
|
* Exit with non-zero status when db:drop failsJay Hayes2015-10-201-0/+10
| | | | | | | | | | | * If the drop task fails for a reason other than the database not existing, processing should end. This is indicated by a non-zero exit status. * Since the backtrace is already printed to screen, we forgo printing it again by using an explicit call to `exit`. * :warning: This modifies the behavior of the db:create task slightly in that the stack trace is no longer printed by default. If the `--trace` option is used, it will print the trace _after_ the error message.
* Exit with non-zero status when db:create failsJay Hayes2015-10-201-0/+17
| | | | | | | | | | | * If the create task fails for a reason other than the database already existing, processing should end. This is indicated by a non-zero exit status. * Since the backtrace is already printed to screen, we forgo printing it again by using an explicit call to `exit`. * :warning: This modifies the behavior of the db:create task slightly in that the stack trace is no longer printed by default. If the `--trace` option is used, it will print the trace _after_ the error message.
* Fix test of drop failureJay Hayes2015-10-201-4/+1
| | | | | | | * Previously the sqlite3 adapter could not "fail" on drop. Now an error is raised when no file exists. * Also updates purge to be resilient of drop failures. This is how purge is expected to behave.
* Add tests to verify exit status for create/drop failuresJay Hayes2015-10-201-0/+28
| | | | | | | | | | * Running the db:create task when the database already exists isn't really an error case. That is processing may proceed in this case because the database exists as requested. So let's validate that behavior with a test. * Likewise, if the database doesn't exist when running the db:drop task processing may continue as the requested condition is already met. Thus a test.
* tests, railties tests should use `bin/` executables when possible.Yves Senn2015-06-301-19/+19
| | | | | We recommend using the `bin/` executables in our docs and guides. Let's make sure that our tests execute the same code path.
* Revert "Merge pull request #17920 from ↵Yves Senn2015-04-271-0/+28
| | | | | | | | | | | | | | | calebthompson/dont-rely-on-environment-task-for-schema-load" This reverts commit 08ff4ccbbb3fb143a02e6752efb974a4bcfcd3bb, reversing changes made to 6c9ed6dbc62450cdb87559afd15798305e069146. Caused by #17920. Closes #19545. This patch introduced regressions because initializers were no longer loaded. Specifically missing inflections result in broken restores of the database.
* Revert "Merge pull request #19404 from dmathieu/remove_rack_env"Jeremy Kemper2015-03-201-0/+3
| | | | | | | Preserving RACK_ENV behavior. This reverts commit 7bdc7635b885e473f6a577264fd8efad1c02174f, reversing changes made to 45786be516e13d55a1fca9a4abaddd5781209103.
* don't fallback to RACK_ENV when RAILS_ENV is not presentDamien Mathieu2015-03-191-3/+0
|
* `db:structure:load` and `db:schema:load` no longer purge the database.Yves Senn2014-12-181-0/+25
| | | | | | | | | | | | | | | | | Closes #17945 `db:test:prepare` still purges the database to always keep the test database in a consistent state. This patch introduces new problems with `db:schema:load`. Prior to the introduction of foreign-keys, we could run this file against a non-empty database. Since every `create_table` containted the `force: true` option, this would recreate tables when loading the schema. However with foreign-keys in place, `force: true` wont work anymore and the task will crash. /cc @schneems
* bring back `db:test:prepare`.Yves Senn2014-11-251-9/+0
| | | | | | | | | | | | | | | This reverts deprecations added in #13528. The task is brought back for two reasons: 1. Give plugins a way to hook into the test database initialization process 2. Give the user a way to force a test database synchronization While `test:prepare` is still a dependency of every test task, `db:test:prepare` no longer hooks into it. This means that `test:prepare` runs before the schema is synchronized. Plugins, which insert data can now hook into `db:test:prepare`. The automatic schema maintenance can't detect when a migration is rolled-back, modified and reapplied. In this case the user has to fall back to `db:test:prepare` to force the synchronization to happen.
* Revert "Replace String index juggling with Pathname goodness in ↵yuuji.yaginuma2014-11-021-0/+10
| | | | | | | | db:fixtures:load" This reverts commit 482fdad5ef8a73688b50bba3991dd4ef6f286edd. Fixes #17237.
* build fix, we have to reset the RACK_ENV as well.Yves Senn2014-09-041-2/+5
| | | | | This is a follow-up to ded17a4 to get the build passing on Travis. As Travis has `ENV["RACK_ENV"]` set to `test` we need to reset that as well.
* schema loading rake tasks maintain database connection for current env.Yves Senn2014-09-031-0/+26
| | | | | | | | | | [Joshua Cody & Yves Senn] Closes #16757. Prior to this patch schema loading rake tasks had the potential to leak a connection to a different database. This had side-effects when rake tasks operating on the current connection (like `db:seed`) were chained.
* Revise 'sqlite3:' URL handling for smoother upgradesMatthew Draper2014-04-031-2/+2
| | | | | | | | | | | | | | | | Restore the 4.0 behaviour for 'sqlite3:///', but deprecate it. We'll change to the absolute-path interpretation in 4.2. The current "correct" spellings for in-memory, relative, and absolute URLs, respectively, are: sqlite3::memory: sqlite3:relative/path sqlite3:/full/path Substantially reverses/defers fbb79b517f3127ba620fedd01849f9628b78d6ce. Uncovered by @guilleiguaran while investigating #14495, though that sounds like a different issue.
* test for structure:dump without schema information table. refs eafec46Yves Senn2014-03-201-0/+12
| | | | This is a test case for the fix provided in eafec4694c5b37eff9d83b1188b8e331fa6027fa
* Remove some indirection in rake dbs testCarlos Antonio da Silva2014-03-201-34/+20
| | | | | Just pass in the expected database as argument rather than "caching" it in a hash and using the hash in the helper methods.
* Check if the output is empty rather than asserting for equalityCarlos Antonio da Silva2014-03-201-5/+4
| | | | Also fix indent of test block.
* Fix assertionsCarlos Antonio da Silva2014-03-161-2/+2
|
* Use DATABASE_URL by defaultschneems2014-01-021-8/+1
| | | See https://github.com/rails/rails/pull/13463#issuecomment-31480799 for full conversation.
* Automatically maintain test database schemaJon Leighton2014-01-021-0/+9
| | | | | | | | | | | | | | * Move check from generated helper to test_help.rb, so that all applications can benefit * Rather than just raising when the test schema has pending migrations, try to load in the schema and only raise if there are pending migrations afterwards * Opt out of the check by setting config.active_record.maintain_test_schema = false * Deprecate db:test:* tasks. The test helper is now fully responsible for maintaining the test schema, so we don't need rake tasks for this. This is also a speed improvement since we're no longer reloading the test database on every call to "rake test".
* Adding missing requireRafael Mendonça França2014-01-021-0/+1
|
* Move default production database to URL sub keyschneems2014-01-011-1/+5
| | | | By using the URL sub key in the `database.yml` by default we are exposing the ability to set other attributes such as `pool` or `reap_frequency` without need of modifying the URL to contain non-connection specific information.
* fix 2.1.0 bug :(schneems2013-12-251-1/+1
|
* ensure environment is run before db:structure:loadschneems2013-12-251-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Right now `db:drop` depends on `load_config` since so when `db:drop` gets executed `load_config` gets run. `db:structure:load` depends on `[:environment, :load_config]`. So before it runs, it executes `environment` but because `load_config` has already executed it is skipped. Note `db:load_config` is "invoke"-d twice, but only "execute"-d once: ``` ** Invoke db:drop (first_time) ** Invoke db:load_config (first_time) ** Execute db:load_config ** Execute db:drop ** Invoke db:structure:load (first_time) ** Invoke environment (first_time) ** Execute environment ** Invoke db:load_config ** Execute db:structure:load ``` The fix for this is making sure that the environment is run before any `load_config`: ``` ** Invoke environment (first_time) ** Execute environment ** Invoke db:drop (first_time) ** Invoke db:load_config (first_time) ** Execute db:load_config ** Execute db:drop ** Invoke db:structure:load (first_time) ** Invoke environment ** Invoke db:load_config ** Execute db:structure:load ```
* Partial fix of database url testsschneems2013-12-251-1/+4
| | | | | | | | Prior to #13463 when `DATABASE_URL` was set, Rails automagically used that value instead of the database.yml. There are tests in dbs_test that expect this to still be true. After that PR, `RAILS_DATABASE_URL` is expected to be read into the YAML file via ERB, this PR fixes that behavior. Note: this does not entirely fix the tests. It seems that `ActiveRecord::Tasks::DatabaseTasks.current_config` does not process the url string correctly (convert it into a hash), and ` ActiveRecord::Tasks::DatabaseTasks.structure_load(current_config, filename)` as well as other methods in `DatabaseTasks` expect a hash. It seems like we should involve the resolver somewhere in this process to correctly convert the database url, I do not know the best place for that /cc @josevalim
* using symbol instead of string in establish_connectionKuldeep Aggarwal2013-12-251-1/+1
|
* Use Full path to sqlite database in testsschneems2013-12-221-3/+3
|
* More Warnings removed for ruby trunkArun Agrawal2013-11-011-2/+2
| | | | Same as 4d4ff531b8807ee88a3fc46875c7e76f613956fb
* Remove hard coded references to Active Record in railtiesJosé Valim2013-03-021-13/+0
|
* run the load_structure test in the test environmentTerence Lee2013-02-211-3/+10
|
* test DATABASE_URL without database.yml aroundTerence Lee2013-02-211-0/+2
|
* Stop shelling out more than necessaryCarlos Antonio da Silva2012-12-071-10/+10
|
* Run rake tasks all at once in rake dbs test for a speed upCarlos Antonio da Silva2012-12-061-12/+6
| | | | | | | | | | | Before: Finished tests in 56.245787s, 0.2133 tests/s, 0.0000 assertions/s. 12 tests, 0 assertions, 0 failures, 0 errors, 0 skips After: Finished tests in 42.401416s, 0.2830 tests/s, 0.0000 assertions/s. 12 tests, 0 assertions, 0 failures, 0 errors, 0 skips
* Fix syntax error in assert_matchRafael Mendonça França2012-09-151-6/+6
|
* Few more warnings removed.Arun Agrawal2012-09-151-3/+3
| | | | | | | I found them when I was running warning mode on with railties See https://github.com/rails/rails/pull/3782
* fixed support for DATABASE_URL for rake db tasksGrace Liu2012-09-111-0/+181
- added tests to confirm establish_connection uses DATABASE_URL and Rails.env correctly even when no arguments are passed in. - updated rake db tasks to support DATABASE_URL, and added tests to confirm correct behavior for these rake tasks. (Removed establish_connection call from some tasks since in those cases the :environment task already made sure the function would be called) - updated Resolver so that when it resolves the database url, it removes hash values with empty strings from the config spec (e.g. to support connection to postgresql when no username is specified).