aboutsummaryrefslogtreecommitdiffstats
path: root/railties/lib/rails/commands
Commit message (Collapse)AuthorAgeFilesLines
* Use `did_you_mean` spell checker for option suggestionsGenadi Samokovarov2018-03-231-2/+2
| | | | | | | | | | | Now that we require Ruby over `2.3`, we can replace the current suggestion methods we have with tooling from the `did_you_mean` gem. There is a small user visible change and this is that we now offer a single suggestion for misspelled options. We are suggesting fixes during generator invocation and during a mistyped rails server rack handler. In both cases, if we don't make a proper prediction on the first match, we won't do so in the second or third one, so in my mind, this is okay.
* Merge pull request #32271 from eileencodes/fix-three-tier-default-connectionEileen M. Uchitelle2018-03-161-1/+1
|\ | | | | Fix default connection handling with three-tier config
| * Switch dbconsole config loader checkeileencodes2018-03-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | In a three-tier config environment `configurations[environment].presence` will return `{ :primary => { :key => value, :key => value }, :secondary => { :key => value, :key => value} }, which means it's not given a single config to connect to. If we flip these however it will connect to primary because that's the default connection, and on a two tier it will be `nil` so the code will select the connection from the configurations rather than the connection.
* | Rely on Rails::Command's help output.Kasper Timm Hansen2018-03-131-15/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We end up with: ``` Usage: bin/rails routes [options] Options: -c, [--controller=CONTROLLER] # Filter by a specific controller, e.g. PostsController or Admin::PostsController. -g, [--grep=GREP] # Grep routes by a specific pattern. -E, [--expanded], [--no-expanded] # Print routes expanded vertically with parts explained. ``` which does miss the bit about routes being printed in order. Also: * Renames options to ease help output readability, then clarifies each option. * Fixes a bunch of indentation.
* | Extract details to methods to clarify command.Kasper Timm Hansen2018-03-131-8/+12
| |
* | Introduce `ActionDispatch::Routing::ConsoleFormatter::Base`bogdanvlviv2018-03-131-7/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | - Create `Base` and inherit `Sheet` and `Expanded` in order to - prevent code duplication. - Remove trailing "\n" for components of `Expanded`. - There is no need for `Expanded#header` to return `@buffer` so return `nil` instead. - Change `no_routes` message "No routes were found for this controller" since if use `-g`, it sounds incorrect. - Display `No routes were found for this controller.` if apply `-c`. - Display `No routes were found for this grep pattern.` if apply `-g`. Related to #32130
* | Do not show unnecessary message during server startupyuuji.yaginuma2018-03-101-6/+5
|/ | | | | | | | | | | | | | | | | | | | Currently, `Exiting` is showed during server startup. ``` ./bin/rails s => Booting Puma => Rails 6.0.0.alpha application starting in development => Run `rails server --help` for more startup options Exiting Puma starting in single mode... * Version 3.11.2 (ruby 2.5.0-p0), codename: Love Song ``` This is because processing at server stop is passed as a block, and `Rack::Serve#start` receives a block and executes it during startup processing. https://github.com/rack/rack/blob/50db1ffdf8b98503fb7c6e6648622b5d7d78d58e/lib/rack/server.rb#L258 In order to avoid this, stop processing is passed as argument.
* Fix "NameError: undefined local variable or method `host'"yuuji.yaginuma2018-03-051-1/+1
| | | | The `host` and `port` can't use this context.
* Introduce explicit rails server handler optionGenadi Samokovarov2018-03-041-16/+72
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I mistype `rails server production` instead of `rails server -e production` expecting to lunch a server in the production environment all the time. However, the signature of `rails server --help` is: ``` Usage: rails server [puma, thin etc] [options] ``` This means that the `production` argument is being interpreted as a Rack server handler like Puma, Thin or Unicorn. Should we argue for the `rails server production`? I'm not sure of the reasons, but the `rails console production` behavior was deprecated in: https://github.com/rails/rails/pull/29358, so parity with the existing `rails console production` usage may not hold anymore. In any case, this PR introduces an explicit option for the Rack servers configuration. The option is called `--using` (or `-u` for short) to avoid the `rails server --server` tantrum. The new interface of `rails server` is: ``` Usage: rails server [using] [options] Options: -p, [--port=port] # Runs Rails on the specified port - defaults to 3000. -b, [--binding=IP] # Binds Rails to the specified IP - defaults to 'localhost' in development and '0.0.0.0' in other environments'. -c, [--config=file] # Uses a custom rackup configuration. # Default: config.ru -d, [--daemon], [--no-daemon] # Runs server as a Daemon. -e, [--environment=name] # Specifies the environment to run this server under (development/test/production). -u, [--using=name] # Specifies the Rack server used to run the application (thin/puma/webrick). -P, [--pid=PID] # Specifies the PID file. # Default: tmp/pids/server.pid -C, [--dev-caching], [--no-dev-caching] # Specifies whether to perform caching in development. [--early-hints], [--no-early-hints] # Enables HTTP/2 early hints. ``` As a bonus, if you mistype the server to use, you'll get an auto-correction message: ``` $ rails s tin Could not find handler "tin". Maybe you meant "thin" or "cgi"? Run `rails server --help` for more options. ```
* Add --expanded option to "rails routes"Benoit Tigeot2018-02-281-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | When using rails routes with small terminal or complicated routes it can be very difficult to understand where is the element listed in header. psql had the same issue, that's why they created "expanded mode" you can switch using `\x` or by starting psql with ``` -x --expanded Turn on the expanded table formatting mode. This is equivalent to the \x command. ``` The output is similar to one implemented here for rails routes: db_user-# \du List of roles -[ RECORD 1 ]---------------------------------------------- Role name | super Attributes | Superuser, Create role, Create DB Member of | {} -[ RECORD 2 ]---------------------------------------------- Role name | role Attributes | Superuser, Create role, Create DB, Replication Member of | {}
* Move rake routes task to rails commandBenoit Tigeot2018-02-271-0/+43
| | | | | | After a discussion with matthewd. It was mentioned that rake tasks need to be moved to rails command. See: https://github.com/rails/rails/issues/32117
* Do not add master key when `RAILS_MASTER_KEY` env specified (#31922)Yuji Yaginuma2018-02-082-2/+3
| | | Fixes #31917
* Improve the deprecation message for using subclass of Rails::Application to ↵Prathamesh Sonpatki2018-01-071-1/+1
| | | | start the Rails server
* Raise an error only when `require_master_key` is specifiedyuuji.yaginuma2017-12-182-4/+19
| | | | | | | | | To prevent errors from being raise in environments where credentials is unnecessary. Context: https://github.com/rails/rails/issues/31283#issuecomment-348801489 Fixes #31283
* Fix secrets command deprecation messageStefan Wrobel2017-12-111-1/+1
|
* Add CLI to manage encrypted files/configs.Wojciech Wnętrzak2017-11-152-21/+85
| | | | | | | | | | | | | | | | | | To edit/show encrypted file: ``` bin/rails encrypted:edit config/staging_tokens.yml.enc bin/rails encrypted:edit config/staging_tokens.yml.enc --key config/staging.key bin/rails encrypted:show config/staging_tokens.yml.enc ``` Also provides a backing Rails.application.encrypted API for Ruby access: ```ruby Rails.application.encrypted("config/staging_tokens.yml.enc").read Rails.application.encrypted("config/staging_tokens.yml.enc").config Rails.application.encrypted("config/staging_tokens.yml.enc", key: "config/staging.key") ```
* Revert displaying master key generation info on `rails new`.Kasper Timm Hansen2017-11-121-0/+1
| | | | | It's already a default for new apps, like so many others, so no need to flaunt it.
* Deprecate encrypted secrets in favor of credentials.Kasper Timm Hansen2017-11-121-10/+9
| | | | | | | | Allow edits of existing encrypted secrets generated on Rails 5.1, but refer to credentials when attempting to setup. This also removes the need for any of the setup code, so the generator can be ripped out altogether.
* [Railties] require_relative => requireAkira Matsuda2017-10-2110-19/+19
| | | | This basically reverts 618268b4b9382f4bcf004a945fe2d85c0bd03e32
* Implement H2 Early Hints for Railseileencodes2017-10-041-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When puma/puma#1403 is merged Puma will support the Early Hints status code for sending assets before a request has finished. While the Early Hints spec is still in draft, this PR prepares Rails to allowing this status code. If the proxy server supports Early Hints, it will send H2 pushes to the client. This PR adds a method for setting Early Hints Link headers via Rails, and also automatically sends Early Hints if supported from the `stylesheet_link_tag` and the `javascript_include_tag`. Once puma supports Early Hints the `--early-hints` argument can be passed to the server to enable this or set in the puma config with `early_hints(true)`. Note that for Early Hints to work in the browser the requirements are 1) a proxy that can handle H2, and 2) HTTPS. To start the server with Early Hints enabled pass `--early-hints` to `rails s`. This has been verified to work with h2o, Puma, and Rails with Chrome. The commit adds a new option to the rails server to enable early hints for Puma. Early Hints spec: https://tools.ietf.org/html/draft-ietf-httpbis-early-hints-04 [Eileen M. Uchitelle, Aaron Patterson]
* Use `TOPLEVEL_BINDING` in rails runner commandyuuji.yaginuma2017-09-221-2/+2
| | | | | | | | | Binding to capture the local scope. This means that if a constant with same name as constant specified by the user exists in local scope, constant defined in local will use. This is different from what the user expects. Therefore, fixed to use top-level binding instead of local scope. Fixes #30644
* Merge pull request #30581 from y-yagi/do_not_add_master_key_twice_to_gitignoreKasper Timm Hansen2017-09-141-1/+0
|\ | | | | Make master key added to gitignore the same value as when creating appplication
| * Make master key added to gitignore the same value as when creating appplicationyuuji.yaginuma2017-09-141-1/+0
| | | | | | | | | | | | | | | | | | For gitignore generated by `rails new`, key with a leading slash is specified. https://github.com/rails/rails/blob/69f976b859cae7f9d050152103da018b7f5dda6d/railties/lib/rails/generators/rails/app/templates/gitignore#L11 Therefore, when executing `credentials:edit`, also need leading slack. In order to avoid such a difference, fixed to use same method for `rails new` and `credentials:edit`.
* | [ci skip] Prefer credentials to secrets in docs.Kasper Timm Hansen2017-09-131-1/+1
|/ | | | | | | Removes most mentions of secrets.secret_key_base and explains credentials instead. Also removes some very stale upgrade notices about Rails 3/4.
* Add credentials using a generic EncryptedConfiguration class (#30067)David Heinemeier Hansson2017-09-112-0/+125
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * WIP: Add credentials using a generic EncryptedConfiguration class This is sketch code so far. * Flesh out EncryptedConfiguration and test it * Better name * Add command and generator for credentials * Use the Pathnames * Extract EncryptedFile from EncryptedConfiguration and add serializers * Test EncryptedFile * Extract serializer validation * Stress the point about losing comments * Allow encrypted configuration to be read without parsing for display * Use credentials by default and base them on the master key * Derive secret_key_base in test/dev, source it from credentials in other envs And document the usage. * Document the new credentials setup * Stop generating the secrets.yml file now that we have credentials * Document what we should have instead Still need to make it happen, tho. * [ci skip] Keep wording to `key base`; prefer defaults. Usually we say we change defaults, not "spec" out a release. Can't use backticks in our sdoc generated documentation either. * Abstract away OpenSSL; prefer MessageEncryptor. * Spare needless new when raising. * Encrypted file test shouldn't depend on subclass. * [ci skip] Some woordings. * Ditch serializer future coding. * I said flip it. Flip it good. * [ci skip] Move require_master_key to the real production.rb. * Add require_master_key to abort the boot process. In case the master key is required in a certain environment we should inspect that the key is there and abort if it isn't. * Print missing key message and exit immediately. Spares us a lengthy backtrace and prevents further execution. I've verified the behavior in a test app, but couldn't figure the test out as loading the app just exits immediately with: ``` /Users/kasperhansen/Documents/code/rails/activesupport/lib/active_support/testing/isolation.rb:23:in `load': marshal data too short (ArgumentError) from /Users/kasperhansen/Documents/code/rails/activesupport/lib/active_support/testing/isolation.rb:23:in `run' from /Users/kasperhansen/.rbenv/versions/2.4.1/lib/ruby/gems/2.4.0/gems/minitest-5.10.2/lib/minitest.rb:830:in `run_one_method' from /Users/kasperhansen/.rbenv/versions/2.4.1/lib/ruby/gems/2.4.0/gems/minitest-5.10.2/lib/minitest/parallel.rb:32:in `block (2 levels) in start' ``` It's likely we need to capture and prevent the exit somehow. Kernel.stub(:exit) didn't work. Leaving it for tomorrow. * Fix require_master_key config test. Loading the app would trigger the `exit 1` per require_master_key's semantics, which then aborted the test. Fork and wait for the child process to finish, then inspect the exit status. Also check we aborted because of a missing master key, so something else didn't just abort the boot. Much <3 to @tenderlove for the tip. * Support reading/writing configs via methods. * Skip needless deep symbolizing. * Remove save; test config reader elsewhere. * Move secret_key_base check to when we're reading it. Otherwise we'll abort too soon since we don't assign the secret_key_base to secrets anymore. * Add missing string literal comments; require unneeded yaml require. * ya ya ya, rubocop. * Add master_key/credentials after bundle. Then we can reuse the existing message on `rails new bc4`. It'll look like: ``` Using web-console 3.5.1 from https://github.com/rails/web-console.git (at master@ce985eb) Using rails 5.2.0.alpha from source at `/Users/kasperhansen/Documents/code/rails` Using sass-rails 5.0.6 Bundle complete! 16 Gemfile dependencies, 72 gems now installed. Use `bundle info [gemname]` to see where a bundled gem is installed. Adding config/master.key to store the master encryption key: 97070158c44b4675b876373a6bc9d5a0 Save this in a password manager your team can access. If you lose the key, no one, including you, can access anything encrypted with it. create config/master.key ``` And that'll be executed even if `--skip-bundle` was passed. * Ensure test app has secret_key_base. * Assign secret_key_base to app or omit. * Merge noise * Split options for dynamic delegation into its own method and use deep symbols to make it work * Update error to point to credentials instead * Appease Rubocop * Validate secret_key_base when reading it. Instead of relying on the validation in key_generator move that into secret_key_base itself. * Fix generator and secrets test. Manually add config.read_encrypted_secrets since it's not there by default anymore. Move mentions of config/secrets.yml to config/credentials.yml.enc. * Remove files I have no idea how they got here. * [ci skip] swap secrets for credentials. * [ci skip] And now, changelogs are coming.
* Fix `can't modify frozen String` error in `DBConsole`yuuji.yaginuma2017-08-291-1/+1
| | | | | | | | | Without this, `dbconsole` raises an error as follwing: ``` RuntimeError: can't modify frozen String railties/lib/rails/commands/dbconsole/dbconsole_command.rb:79:in `start' ```
* Make `restart` and `dev:cache` tasks work when customizing pid file pathyuuji.yaginuma2017-08-211-1/+7
| | | | | | | | | | Originally, it hard-coded pid file path. It can not be removed when customizing pid file path. But rake task can not get pid file path. Therefore, do not remove file in rake task, makes it possible to judge whether it is restart from the argument of the command and removes the file in server command. Fixes #29306
* Merge pull request #29891 from pat/frozen-string-literals-railtiesRafael França2017-08-1414-1/+29
|\ | | | | Railties updates for frozen string literals.
| * Adding frozen_string_literal pragma to Railties.Pat Allan2017-08-1414-0/+28
| |
| * Railties updates for frozen string literals.Pat Allan2017-08-141-1/+1
| |
* | Merge pull request #29994 from y-yagi/fix_test_runner_helpKasper Timm Hansen2017-08-141-21/+14
|\ \ | |/ |/| Show minitest options in test runner help
| * Show minitest options in test runner helpyuuji.yaginuma2017-07-311-21/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since #29572, minitest options are available but are no longer showed in help. This fixed to show minitest option in help as with Rails 5.1.2. **before** ``` ./bin/rails t --help You can run a single test by appending a line number to a filename: bin/rails test test/models/user_test.rb:27 You can run multiple files and directories at the same time: bin/rails test test/controllers test/integration/login_test.rb By default test failures and errors are reported inline during a run. Rails options: -w, --warnings Run with Ruby warnings enabled -e, --environment Run tests in the ENV environment -b, --backtrace Show the complete backtrace -d, --defer-output Output test failures and errors after the test run -f, --fail-fast Abort test run on first failure or error -c, --[no-]color Enable color in the output ``` **after** ``` ./bin/rails t --help You can run a single test by appending a line number to a filename: bin/rails test test/models/user_test.rb:27 You can run multiple files and directories at the same time: bin/rails test test/controllers test/integration/login_test.rb By default test failures and errors are reported inline during a run. minitest options: -h, --help Display this help. -s, --seed SEED Sets random seed. Also via env. Eg: SEED=n rake -v, --verbose Verbose. Show progress processing files. -n, --name PATTERN Filter run on /regexp/ or string. --exclude PATTERN Exclude /regexp/ or string from run. Known extensions: rails, pride -w, --warnings Run with Ruby warnings enabled -e, --environment Run tests in the ENV environment -b, --backtrace Show the complete backtrace -d, --defer-output Output test failures and errors after the test run -f, --fail-fast Abort test run on first failure or error -c, --[no-]color Enable color in the output -p, --pride Pride. Show your testing pride! ```
* | Deprecate support of older `config.ru`yuuji.yaginuma2017-08-081-1/+8
|/ | | | | | | | Since Rails 4.0, `config.ru` generated by default uses instances of `Rails.application`. Therefore, I think that it is good to deprecate the old behavior. Related: #9669
* Do not show URL in boot info when using Pumayuuji.yaginuma2017-07-241-2/+6
| | | | | | | | | | | Puma has its own configuration file(e.g. `config/puma.rb`). Can define a port and a URL to bind in the configuration file. Therefore, on Rails side, can not grasp which URI to bind finally. Because of that, it may show a URL different from the actually bound URL, so I think that it is better not to show it. Fixes #29880
* support `-` as an argument to `rails runner`Cody Cutrer2017-07-172-2/+7
| | | | | | | | | | | | | in Rails 4.0, you could use `/dev/stdin` on both Linux and Mac, but with the switch to Kernel.load in Rails 4.1, this broke on Linux (you get a LoadError). Instead, explicitly detect `-` as meaning stdin, then read from stdin explicitly, instead of performing file gymnastics. This should now work on any platform uniformly. Passing a script via stdin is useful when you're sshing to a server, and the script you want to run is stored locally. You could theoretically pass the entire script on the command line, but in reality you'll run into problems with the command being too long.
* Set `RAILS_ENV` before load application fileyuuji.yaginuma2017-07-171-1/+4
| | | | | | | Since #29725, load application file when `dbconsole` command is executed. However, if do not set `RAILS_ENV` before reading the application file, can not connect to the env specified in option, so added the setting of `RAILS_ENV`.
* Properly expand the environment's nameRobin Dupret2017-07-162-6/+0
| | | | | | | | | Running the `console` and `dbconsole` commands with a regular argument as the environment's name automatically expand it to match an existing environment (e.g. dev for development). This feature wasn't available using the `--environment` (a.k.a `-e`) option.
* Allow to pass a connection to the `dbconsole` commandRobin Dupret2017-07-161-2/+14
| | | | | | | | | | | Since 0a4f6009, it's possible to specify a 3-level database configuration to gather connections by environment. The `dbconsole` command will try to look for a database configuration which points to the current environment but with such flavour, the environment key is flushed out so let's add the ability to specify the connection and pick `primary` by default to be consistent with Active Record.
* * Don't eagerly require Rails' minitest plugin.Kasper Timm Hansen2017-07-101-5/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | By making the Rails minitest behave like a standard minitest plugin we're much more likely to not break when people use other minitest plugins. Like minitest-focus and pride. To do this, we need to behave like minitest: require files up front and then perform the plugin behavior via the at_exit hook. This also saves us a fair bit of wrangling with test file loading. Finally, since the environment and warnings options have to be applied as early as possible, and since minitest loads plugins at_exit, they have to be moved to the test command. * Don't expect the root method. It's likely this worked because we eagerly loaded the Rails minitest plugin and that somehow defined a root method on `Rails`. * Assign a backtrace to failed exceptions. Otherwise Minitest pukes when attempting to filter the backtrace (which Rails' backtrace cleaner then removes). Means the exception message test has to be revised too. This is likely caused by the rails minitest plugin now being loaded for these tests and assigning a default backtrace cleaner.
* Load environment file in `dbconsole` commandyuuji.yaginuma2017-07-091-0/+1
| | | | | | | | | Currently the environment file is not loaded in `dbconsole` command. Therefore, for example, if use encrypted secrets values in database.yml, `read_encrypted_secrets` will not be true, so the value can not be used correctly. Fixes #29717
* Add `rails secrets:show` commandyuuji.yaginuma2017-07-071-0/+4
| | | | | | | | | | | When secrets confirmed with the `secrets:edit` command, `secrets.yml.enc` will change without updating the secrets. Therefore, even if only want to check secrets, the difference will come out. This is a little inconvenient. In order to solve this problem, added the `secrets:show` command. If just want to check secrets, no difference will occur use this command.
* [Railties] require => require_relativeAkira Matsuda2017-07-019-14/+14
|
* Add the `<app_root>/test` dir to the `$LOAD_PATH` as a string:Edouard CHIN2017-06-161-1/+1
| | | | - [Rails <= 5.0](https://github.com/rails/rails/blob/5-0-stable/railties/lib/rails/commands/test.rb#L6) used to add the `<app_root>/test` as a string; this behaviour changed in rails 5.1, it's appending a `Pathname` object
* Access EDITOR through Ruby's cross-platform ENV.Kasper Timm Hansen2017-06-111-2/+2
| | | | | Fix the mistake of not using Ruby's ENV hash from the get go and get windows support.
* Merge pull request #29146 from y-yagi/fix_29138Kasper Timm Hansen2017-05-281-2/+9
|\ | | | | Correctly set user_supplied_options when there is no whitespace in option specification
| * Correctly set user_supplied_options when there is no whitespace in option ↵yuuji.yaginuma2017-05-241-2/+9
| | | | | | | | | | | | | | | | | | | | specification Current `user_supplied_options` method can not set the value correctly if there is no space between option and value (e.g., `-p9000`). This makes it possible to set the value correctly in the case like the above. Fixes #29138
* | Reorder first secrets edit flow.Kasper Timm Hansen2017-05-251-4/+16
| | | | | | | | | | | | Setup config/secrets.yml.enc with template contents for people to edit. Then generate encryption key and encrypt the initial secrets.
* | Remove needless waiting message.Kasper Timm Hansen2017-05-231-1/+0
|/ | | | | Needed back when we attempted to wait for editors, but now we expect users to pass a -w flag to their $EDITOR.
* Update system test runner docseileencodes2017-05-141-8/+9
| | | | | | | | | It wasn't clear that system tests don't run with the rest of the test suite and are part of a separate command. This documents the `test:system` command as well as update the Rails runner help documentation to make it clearer that system tests are run via their own command by default.
* Allow irb options to be passed from `rails console` commandyuuji.yaginuma2017-05-081-2/+14
| | | | Fixes #28988
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-17 02:02:48 +0000