aboutsummaryrefslogtreecommitdiffstats
path: root/activerecord/test/cases/adapters/mysql2
Commit message (Collapse)AuthorAgeFilesLines
* These limits are now implicitMatthew Draper2015-12-182-2/+2
|
* Allow users to pass flags from database.ymlStephen Blackstone2015-12-151-0/+7
| | | | | | Fix white-space Add test case demonstrating flags are received by the adapter
* Fix test failure in `adapters/mysql/active_schema_test.rb`Ryuta Kamizono2015-11-201-1/+1
| | | | Follow up to #21601.
* Rename 'key' to 'lock_id' or 'lock_name' for advisory lockingSam Davies2015-11-181-9/+9
| | | | | | | | | - key was a poor choice of name. A key implies something that will unlock a lock. The concept is actually more like a 'lock identifier' - mysql documentation calls this a 'lock name' - postgres documentation calls it a 'lock_id' - Updated variable names to reflect the preferred terminology for the database in question
* Deprecate `#table_exists?`, `#tables` and passing arguments to `#talbes`yui-knk2015-11-092-8/+8
| | | | | | | | | | Reported on #21509, how views is treated by `#tables` are differ by each adapters. To fix this different behavior, after Rails 5.0 is released, deprecate `#tables`. And `#table_exists?` would check both tables and views. To make their behavior consistent with `#tables`, after Rails 5.0 is released, deprecate `#table_exists?`.
* No need `MysqlDouble` and `MysqlDouble.reset_column_information`Ryuta Kamizono2015-11-051-12/+6
|
* Add test_float_limits to mysql2yui-knk2015-11-031-0/+37
| | | | | | This test case was definded by 51de8cee82d61541725ff4c2462b083f37e64017. `float` and `double` is registered in abstract_mysql_adapter.rb, we should test not only for mysql adapter, but mysql2 adapter.
* Merge pull request #22122 from ↵Sean Griffin2015-10-301-0/+28
|\ | | | | | | | | samphilipd/sam/manual_locking_on_schema_migrations Make migrations concurrent safe (using advisory locks)
| * Use advisory locks to prevent concurrent migrationsSam Davies2015-10-301-0/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Addresses issue #22092 - Works on Postgres and MySQL - Uses advisory locks because of two important properties: 1. The can be obtained outside of the context of a transaction 2. They are automatically released when the session ends, so if a migration process crashed for whatever reason the lock is not left open perpetually - Adds get_advisory_lock and release_advisory_lock methods to database adapters - Attempting to run a migration while another one is in process will raise a ConcurrentMigrationError instead of attempting to run in parallel with undefined behavior. This could be rescued and the migration could exit cleanly instead. Perhaps as a configuration option? Technical Notes ============== The Migrator uses generate_migrator_advisory_lock_key to build the key for the lock. In order to be compatible across multiple adapters there are some constraints on this key. - Postgres limits us to 64 bit signed integers - MySQL advisory locks are server-wide so we have to scope to the database - To fulfil these requirements we use a Migrator salt (a randomly chosen signed integer with max length of 31 bits) that identifies the Rails migration process as the owner of the lock. We multiply this salt with a CRC32 unsigned integer hash of the database name to get a signed 64 bit integer that can also be converted to a string to act as a lock key in MySQL databases. - It is important for subsequent versions of the Migrator to use the same salt, otherwise different versions of the Migrator will not see each other's locks.
* | Fix test failures caused by #19501Sean Griffin2015-10-291-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The first one is quite straightforward. We want to give the proper error message in the case where a top level constant exists, but we're looking for a nested one. We just need to port over the change to use `subclass.name` into these changes. The second set of failures, which are only present in the mysql adapter tests, are stranger to me. The failure occurs because we were previously comparing `subclass.name == self.name` instead of `subclass == self`. However, I don't think that we need to support creating anonymous classes which share a table with a class that uses STI, overrides `name` to return the same name as athe class that we have no other relationship with, when not assigned to a constant so it could never be used anyway... The commits around why that exist give no context, and I think they're just poorly written tests (WTF does `test_schema` mean anyway, and why does calling `.first` on some anonymous class test it?). We'll just disable STI on that class.
* | tests, no every adapter supports "connection.version"Yves Senn2015-10-291-11/+12
|/ | | | | | | | | | | | | | | | | | | | | | | | This solves the following issue: ``` $ bin/test Using sqlite3 /Users/senny/Projects/rails/activerecord/test/cases/adapters/mysql2/sp_test.rb:16:in `<class:Mysql2StoredProcedureTest>': undefined method `version' for #<ActiveRecord::ConnectionAdapters::SQLite3Adapter:0x007f8bab4b5b70> (NoMethodError) from /Users/senny/Projects/rails/activerecord/test/cases/adapters/mysql2/sp_test.rb:5:in `<top (required)>' from /Users/senny/Projects/rails/activesupport/lib/active_support/dependencies.rb:302:in `require' from /Users/senny/Projects/rails/activesupport/lib/active_support/dependencies.rb:302:in `block in require' from /Users/senny/Projects/rails/activesupport/lib/active_support/dependencies.rb:268:in `load_dependency' from /Users/senny/Projects/rails/activesupport/lib/active_support/dependencies.rb:302:in `require' from /Users/senny/Projects/rails/railties/lib/rails/test_unit/test_requirer.rb:11:in `block in require_files' from /Users/senny/Projects/rails/railties/lib/rails/test_unit/test_requirer.rb:10:in `each' from /Users/senny/Projects/rails/railties/lib/rails/test_unit/test_requirer.rb:10:in `require_files' from /Users/senny/Projects/rails/railties/lib/rails/test_unit/minitest_plugin.rb:69:in `plugin_rails_init' from /Users/senny/.rbenv/versions/2.2.3/lib/ruby/gems/2.2.0/gems/minitest-5.3.3/lib/minitest.rb:73:in `block in init_plugins' from /Users/senny/.rbenv/versions/2.2.3/lib/ruby/gems/2.2.0/gems/minitest-5.3.3/lib/minitest.rb:71:in `each' from /Users/senny/.rbenv/versions/2.2.3/lib/ruby/gems/2.2.0/gems/minitest-5.3.3/lib/minitest.rb:71:in `init_plugins' from /Users/senny/.rbenv/versions/2.2.3/lib/ruby/gems/2.2.0/gems/minitest-5.3.3/lib/minitest.rb:122:in `run' from bin/test:19:in `<main>' ```
* Merge pull request #21932 from kamipo/add_stored_procedure_test_in_mysql2Sean Griffin2015-10-201-0/+29
|\ | | | | Add stored procedure test in mysql2
| * Add stored procedure test in mysql2Ryuta Kamizono2015-10-151-0/+29
| |
* | Fix to correctly schema dump the `tinyblob`Ryuta Kamizono2015-10-151-1/+1
|/ | | | | | Currently `tinyblob` is dumped to `t.binary "tiny_blob", limit: 255`. But `t.binary ... limit: 255` is generating SQL to `varchar(255)`. It is incorrect. This commit fixes this problem.
* Refactor `table_exists?` in AbstractMysqlAdapterRyuta Kamizono2015-09-201-8/+0
| | | | | | `table_exists?` calls `tables` twice when passed `'dbname.tblname'` arg. This change is that `table_exists?` execute only once query always and extra args of `tables` is removed.
* Merge pull request #17696 from kamipo/unsigned_integer_supportJeremy Daer2015-09-191-2/+37
|\ | | | | | | Add `unsigned` support for numeric data types in MySQL
| * Add `unsigned` types for numeric data types in MySQLRyuta Kamizono2015-09-181-0/+13
| | | | | | | | | | | | | | | | | | | | | | In the case of using `unsigned` as the type: create_table :foos do |t| t.unsigned_integer :unsigned_integer t.unsigned_bigint :unsigned_bigint t.unsigned_float :unsigned_float t.unsigned_decimal :unsigned_decimal, precision: 10, scale: 2 end
| * Add `unsigned` support for numeric data types in MySQLRyuta Kamizono2015-09-181-2/+24
| | | | | | | | | | | | | | | | | | | | | | Example: create_table :foos do |t| t.integer :unsigned_integer, unsigned: true t.bigint :unsigned_bigint, unsigned: true t.float :unsigned_float, unsigned: true t.decimal :unsigned_decimal, unsigned: true, precision: 10, scale: 2 end
* | Should test both mysql adaptersRyuta Kamizono2015-09-201-10/+8
|/ | | | | Some test cases are testing only mysql adapter. We should test mysql2 adapter also.
* Add a native JSON data type support in MySQLRyuta Kamizono2015-08-181-0/+172
| | | | | | | | | | As of MySQL 5.7.8, MySQL supports a native JSON data type. Example: create_table :json_data_type do |t| t.json :settings end
* use `assert_not` instead of `refute` as mentioned in our guides.Yves Senn2015-08-131-1/+1
| | | | | | | | | | | As described in the "Follow Coding Conventions" section in our contribution guide (http://edgeguides.rubyonrails.org/contributing_to_ruby_on_rails.html#follow-the-coding-conventions) we favor `assert_not` over `refute`. While we don't usually make stylistic changes on it's own I opted to do it in this case. The reason being that test cases are usually copied as a starting point for new tests. This results in a spread of `refute` in files that have been using it already.
* Remove @connection instance variable only when definedYasuo Honda2015-07-261-2/+2
|
* Ensure that microsecond precision is only used for version of mysql that ↵Jori Hardman2015-07-201-0/+21
| | | | support it. Fixes #19711
* make it possible to run AR tests with bin/testYves Senn2015-06-1114-75/+70
|
* If specify `strict: :default` explicitly, do not set sql_mode.Ryuta Kamizono2015-05-261-0/+9
| | | | Related with #17370.
* More exercise the create index sql testsRyuta Kamizono2015-05-041-0/+37
|
* Merge pull request #17569 from kamipo/dump_table_optionsRafael Mendonça França2015-05-031-0/+42
|\ | | | | | | Correctly dump `:options` on `create_table` for MySQL
| * Correctly dump `:options` on `create_table` for MySQLRyuta Kamizono2015-05-031-0/+42
| |
* | Remove unused requireRyuta Kamizono2015-05-031-1/+0
|/
* Use `use_transactional_tests` in Active RecordPrem Sichanugrist2015-04-101-1/+1
| | | | | | `use_transactional_fixtures` was deprecated in favor of `use_transactional_tests` in Rails 5.0. This removes one warning while running test suite.
* Merge pull request #17574 from kamipo/charset_collation_optionsJeremy Kemper2015-04-071-0/+54
|\ | | | | | | Add charset and collation options support for MySQL string and text columns.
| * Add `:charset` and `:collation` options support for MySQL string and text ↵Ryuta Kamizono2015-03-061-0/+54
| | | | | | | | | | | | | | | | | | | | | | columns Example: create_table :foos do |t| t.string :string_utf8_bin, charset: 'utf8', collation: 'utf8_bin' t.text :text_ascii, charset: 'ascii' end
* | Closes rails/rails#18864: Renaming transactional fixtures to transactional testsBrandon Weiss2015-03-163-3/+3
|/ | | | | | | | | | | | | | | | | | | | | | | | | I’m renaming all instances of `use_transcational_fixtures` to `use_transactional_tests` and “transactional fixtures” to “transactional tests”. I’m deprecating `use_transactional_fixtures=`. So anyone who is explicitly setting this will get a warning telling them to use `use_transactional_tests=` instead. I’m maintaining backwards compatibility—both forms will work. `use_transactional_tests` will check to see if `use_transactional_fixtures` is set and use that, otherwise it will use itself. But because `use_transactional_tests` is a class attribute (created with `class_attribute`) this requires a little bit of hoop jumping. The writer method that `class_attribute` generates defines a new reader method that return the value being set. Which means we can’t set the default of `true` using `use_transactional_tests=` as was done previously because that won’t take into account anyone using `use_transactional_fixtures`. Instead I defined the reader method manually and it checks `use_transactional_fixtures`. If it was set then it should be used, otherwise it should return the default, which is `true`. If someone uses `use_transactional_tests=` then it will overwrite the backwards-compatible method with whatever they set.
* Add `SchemaMigration.create_table` support any unicode charsets for MySQL.Ryuta Kamizono2015-02-261-2/+2
| | | | | | | | | | | | | | | | | MySQL unicode support is not only `utf8mb4`. Then, The index length problem is not only `utf8mb4`. http://dev.mysql.com/doc/refman/5.6/en/charset-unicode.html SELECT * FROM information_schema.character_sets WHERE maxlen > 3; +--------------------+----------------------+------------------+--------+ | CHARACTER_SET_NAME | DEFAULT_COLLATE_NAME | DESCRIPTION | MAXLEN | +--------------------+----------------------+------------------+--------+ | utf8mb4 | utf8mb4_general_ci | UTF-8 Unicode | 4 | | utf16 | utf16_general_ci | UTF-16 Unicode | 4 | | utf16le | utf16le_general_ci | UTF-16LE Unicode | 4 | | utf32 | utf32_general_ci | UTF-32 Unicode | 4 | +--------------------+----------------------+------------------+--------+
* Prefer `drop_table if_exists: true` over raw SQLRyuta Kamizono2015-02-181-1/+1
| | | | | Lowercase raw SQL has been replaced by 07b659c already. This commit replaces everything else of raw SQL.
* prefer `drop_table if_exists: true` over raw SQL.Yves Senn2015-02-181-1/+1
| | | | | | | /cc @yahonda This makes it easier for third party adapters to run our tests, even if that database does not support IF EXISTS.
* Extract `DateTimePrecisionTest`Ryuta Kamizono2015-02-131-84/+0
| | | | The datetime precision tests for any adapters is duplicated.
* Refactor microsecond precision to be database agnosticSean Griffin2015-02-102-14/+4
| | | | | | | | | | The various databases don't actually need significantly different handling for this behavior, and they can achieve it without knowing about the type of the object. The old implementation was returning a string, which will cause problems such as breaking TZ aware attributes, and making it impossible for the adapters to supply their logic for time objects.
* Respect the database default charset for `schema_migrations` table.Ryuta Kamizono2015-02-081-4/+12
| | | | | | The charset of `version` column in `schema_migrations` table is depend on the database default charset and collation rather than the encoding of the connection.
* tests, use `drop_table if_exists: true` in our test suite.Yves Senn2015-01-201-1/+1
|
* Merge pull request #18067 from ↵Rafael Mendonça França2015-01-021-0/+87
|\ | | | | | | | | | | | | | | | | kamipo/format_datetime_string_according_to_precision Format the datetime string according to the precision of the datetime field. Conflicts: activerecord/CHANGELOG.md
| * Format the datetime string according to the precision of the datetime field.Ryuta Kamizono2015-01-021-0/+17
| | | | | | | | | | | | | | | | | | Incompatible to rounding behavior between MySQL 5.6 and earlier. In 5.5, when you insert `2014-08-17 12:30:00.999999` the fractional part is ignored. In 5.6, it's rounded to `2014-08-17 12:30:01`: http://bugs.mysql.com/bug.php?id=68760
| * Allow precision option for MySQL datetimes.Ryuta Kamizono2015-01-021-0/+70
|/
* Stop relying on columns for type information in mysql2 casting testsSean Griffin2015-01-011-4/+2
| | | | | | The column itself has no actual impact on the return value. These were actually testing the behavior of the type object, which is sufficiently covered elsewhere.
* Go through normal `where` logic when preloading associationsSean Griffin2014-12-261-1/+1
| | | | | | | | | | This will allow eager type casting to take place as needed. There doesn't seem to be any particular reason that the `in` statement was forced for single values, and the commit message where it was introduced gives no context. See https://github.com/rails/rails/commit/d90b4e2615e8048fdeffc6dffe3246704adee01f
* Fix undesirable RangeError by Type::Integer. Add Type::UnsignedInteger.Ryuta Kamizono2014-12-121-0/+30
|
* Failure to rollback t.timestamps when within a change_table migrationnoam2014-12-031-1/+1
| | | | | | | | | | | | | When running the following migration: change_table(:table_name) { |t| t/timestamps } The following error was produced: wrong number of arguments (2 for 1) .... /connection_adapters/abstract/schema_statements.rb:851:in `remove_timestamps' This is due to `arguments` containing an empty hash as its second argument.
* Pass symbol as an argument instead of a blockErik Michaels-Ober2014-11-293-6/+4
|
* synchronize code and docs for `timestamps` and `add_timestamps`.Yves Senn2014-11-201-1/+1
| | | | | | | | This makes the following changes: * warn if `:null` is not passed to `add_timestamps` * `timestamps` method docs link to `add_timestamps` docs * explain where additional options go * adjust examples to include `null: false` (to prevent deprecation warnings)
* Build fix when running in isolationArun Agrawal2014-11-141-0/+1
| | | | | `Computer` class needs to be require See #17217 for more details
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 07:41:47 +0000