aboutsummaryrefslogtreecommitdiffstats
path: root/activemodel/test
Commit message (Collapse)AuthorAgeFilesLines
...
* ensure activemodel lib is setup correctlyJoshua Peek2010-02-281-0/+3
|
* Accept array of attributes as arg also, like 2.3Jeremy Kemper2010-02-251-10/+16
|
* Revert "Fix test load paths for those not using bundler"Carlhuda2010-02-232-9/+2
| | | | | | This reverts commit eec2d301d4ce9df9c71c1a5aa63053eb970b6818. This commit broke tests. You cannot have a file called "bundler" on the load path.
* Fix AMo isolated tests.José Valim2010-02-221-1/+1
|
* Add validators reflection so you can do 'Person.validators' and ↵Prem Sichanugrist2010-02-212-0/+28
| | | | | | 'Person.validators_on(:name)'. Signed-off-by: José Valim <jose.valim@gmail.com>
* Require persisted? in ActiveModel::Lint and remove new_record? and ↵José Valim2010-02-213-7/+6
| | | | destroyed? methods. ActionPack does not care if the resource is new or if it was destroyed, it cares only if it's persisted somewhere or not.
* Add to_key and to_param methods to ActiveModel::Conversion.José Valim2010-02-213-16/+34
|
* AMo #key is now #to_key and CI is probably happysnusnu2010-02-201-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Obviously #key is a too common name to be included in the AMo interface, #to_key fits better and also relates nicely to #to_param. Thx wycats, koz and josevalim for the suggestion. AR's #to_key implementation now takes customized primary keys into account and there's a testcase for that too. The #to_param AMo lint makes no assumptions on how the method behaves in the presence of composite primary keys. It leaves the decision wether to provide a default, or to raise and thus signal to the user that implementing this method will need his special attention, up to the implementers. All AMo cares about is that #to_param is implemented and returns nil in case of a new_record?. The default CompliantObject used in lint_test provides a naive default implementation that just joins all key attributes with '-'. The #to_key default implementation in lint_test's CompliantObject now returns [id] instead of [1]. This was previously causing the (wrong) tests I added for AR's #to_key implementation to pass. The #to_key tests added with this patch should be better. The CI failure was caused by my lack of knowledge about the test:isolated task. The tests for the record_identifier code in action_controller are using fake non AR models and I forgot to stub the #to_key method over there. This issue didn't come up when running the test task, only test:isolated revealed it. This patch fixes that. All tests pass isolated or not, well, apart from one previously unpended test in action_controller that is unrelated to my patch.
* Adds #key and #to_param to the AMo interfacesnusnu2010-02-191-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit introduces two new methods that every AMo compliant object must implement. Below are the default implementations along with the implied interface contract. # Returns an Enumerable of all (primary) key # attributes or nil if new_record? is true def key new_record? ? nil : [1] end # Returns a string representing the object's key # suitable for use in URLs, or nil if new_record? # is true def to_param key ? key.first.to_s : nil end 1) The #key method Previously rails' record_identifier code, which is used in the #dom_id helper, relied on calling #id on the record to provide a reasonable DOM id. Now with rails3 being all ORM agnostic, it's not safe anymore to assume that every record ever will have an #id as its primary key attribute. Having a #key method available on every AMo object means that #dom_id can be implemented using record.to_model.key # instead of record.id Using this we're able to take composite primary keys into account (e.g. available in datamapper) by implementing #dom_id using a newly added record_key_for_dom_id(record) method. The user can overwrite this method to provide customized versions of the object's key used in #dom_id. Also, dealing with more complex keys that can contain arbitrary strings, means that we need to make sure that we only provide DOM ids that are valid according to the spec. For this reason, this patch sends the key provided through a newly added sanitize_dom_id(candidate_id) method, that makes sure we only produce valid HTML The reason to not just add #dom_id to the AMo interface was that it feels like providing a DOM id should not be a model concern. Adding #dom_id to the AMo interface would force these concern on the model, while it's better left to be implemented in a helper. Now one could say the same is true for #to_param, and actually I think that it doesn't really fit into the model either, but it's used in AR and it's a main part of integrating into the rails router. This is different from #dom_id which is only used in view helpers and can be implemented on top of a semantically more meaningful method like #key. 2) The #to_param method Since the rails router relies on #to_param to be present, AR::Base implements it and returns the id by default, allowing the user to overwrite the method if desired. Now with different ORMs integrating into rails, every ORM railtie needs to implement it's own #to_param implementation while already providing code to be AMo compliant. Since the whole point of AMo compliance seems to be to integrate any ORM seamlessly into rails, it seems fair that all we really need to do as another ORM, is to be AMo compliant. By including #to_param into the official interface, we can make sure that this code can be centralized in the various AMo compliance layers, and not be added separately by every ORM railtie. 3) All specs pass
* Fix test load paths for those not using bundlerJoshua Peek2010-02-152-2/+9
|
* Get rails tests running on bundler 0.9Carl Lerche2010-01-311-7/+1
|
* Axe AM state machineJoshua Peek2010-01-305-560/+0
| | | | We're going do it eventually, get it done before 3.0 is final.
* Drop AR I18n deprecation and simple use errors.messages as fallback.José Valim2010-01-301-14/+14
|
* Adding Proc support to validation messages so that they can become a little ↵Samuel Elliott2010-01-171-0/+8
| | | | | | more dynamic, allowing for customisations during the request [#3514 status:resolved]. Signed-off-by: José Valim <jose.valim@gmail.com>
* Fix typos and add tests to ensure they will be caught the next time.José Valim2010-01-111-0/+8
|
* Fix typo by renaming :genre to :gender.José Valim2010-01-092-7/+7
|
* Allow validates to map some types to specific options. So now you can do:José Valim2010-01-082-12/+38
| | | | | | validates :email, :presence => true, :format => /@/ validates :genre, :inclusion => %w(m f) validates :password, :length => 6..20
* Compile length validator options still at the class level, so whenever the ↵José Valim2010-01-081-4/+2
| | | | validator is called, it just needs to check for :maximum, :minimum and :is values.
* Allow :if, :unless, :on, :allow_nil and :allow_blank as shared options in ↵José Valim2010-01-072-3/+42
| | | | validates.
* Add validates method as shortcut to setup validators for a given set of ↵jamie2010-01-075-2/+92
| | | | | | | | | | | | | | | attributes: class Person < ActiveRecord::Base include MyValidators validates :name, :presence => true, :uniqueness => true, :length => { :maximum => 100 } validates :email, :presence => true, :email => true end [#3058 status:resolved] Signed-off-by: José Valim <jose.valim@gmail.com>
* Allow to specify default attributes names translation in I18n yml files.José Valim2010-01-071-0/+5
| | | | | | | | | | | | For example, you could easily specify :created_at and :updated_at translations as: en: attributes: created_at: "Created at" updated_at: "Updated at" This configuration is built on ActiveModel, so it means those translations are shared between different ORMs as well (but always as a fallback).
* Be sure to dup load paths before clearing the array.José Valim2010-01-071-1/+1
|
* Errors messages are now moved from :activerecord.errors to simply :errors on ↵José Valim2010-01-072-80/+44
| | | | I18n yml files.
* Autoload AR test caseJoshua Peek2010-01-041-2/+0
|
* Autoload AMo test caseJoshua Peek2010-01-041-1/+0
|
* Add missing tests to Validators.José Valim2010-01-031-0/+47
|
* Remove deprecated ActiveModel tests (%d and %s is no longer supported in ↵José Valim2010-01-021-14/+0
| | | | error messages a couple months already)
* Add naming to AMo::LintJosé Valim2010-01-021-0/+2
|
* Use activerecord.errors.format as in Rails 2.3.5.José Valim2010-01-021-0/+6
|
* Be sure to convert namespaced names to we have 'Parrots name' instead of ↵José Valim2010-01-022-1/+7
| | | | 'Parrots.name' in error messages.
* Move ActiveRecord callbacks implementation to ActiveModel and make use of it.José Valim2009-12-281-0/+70
| | | | Signed-off-by: Yehuda Katz <wycats@Yehuda-Katz.local>
* No need to use ValidationsRepairHelper hack on ActiveModel anymore, ↵José Valim2009-12-2313-202/+120
| | | | Model.reset_callbacks(:validate) is enough. However, tests in ActiveRecord are still coupled, so moved ValidationsRepairHelper back there.
* Small clean up in Naming and TTranslation tests.José Valim2009-12-234-22/+25
|
* Move validations in ActiveModel to validators, however all validatity checks ↵José Valim2009-12-231-2/+2
| | | | are still in the class method.
* Validator is simply sent to validate method. However, the API needs to ↵José Valim2009-12-221-6/+6
| | | | change, so validate accepts a record.
* Fully expand relative rails framework paths and make sure we aren'tJoshua Peek2009-12-161-4/+2
| | | | adding any to the load path more than once.
* Reorganize autoloads:Carlhuda2009-12-022-0/+2
| | | | | | | | | | | | | | | | | | | | | * A new module (ActiveSupport::Autoload) is provide that extends autoloading with new behavior. * All autoloads in modules that have extended ActiveSupport::Autoload will be eagerly required in threadsafe environments * Autoloads can optionally leave off the path if the path is the same as full_constant_name.underscore * It is possible to specify that a group of autoloads live under an additional path. For instance, all of ActionDispatch's middlewares are ActionDispatch::MiddlewareName, but they live under "action_dispatch/middlewares/middleware_name" * It is possible to specify that a group of autoloads are all found at the same path. For instance, a number of exceptions might all be declared there. * One consequence of this is that testing-related constants are not autoloaded. To get the testing helpers for a given component, require "component_name/test_case". For instance, "action_controller/test_case". * test_help.rb, which is automatically required by a Rails application's test helper, requires the test_case.rb for all active components, so this change will not be disruptive in existing or new applications.
* Avoid adding component lib/ to load path multiple timesJoshua Peek2009-11-091-1/+3
|
* Move validator, human_name and human_attribute_name to ActiveModel, remove ↵José Valim2009-10-205-6/+64
| | | | | | deprecated error messages and add i18n_scope and lookup_ancestors. Signed-off-by: Carl Lerche <carllerche@mac.com>
* Have all the tests running off a single GemfileYehuda Katz + Carl Lerche2009-10-201-7/+6
|
* Bundle AMoYehuda Katz2009-10-151-2/+7
|
* Rewrite ActiveModel::Lint as a simple TU mixinJoshua Peek2009-10-071-32/+8
|
* Fixed behavior of attribute_methods_generated? [#3220 state:resolved]Sam Pohlenz2009-10-071-0/+26
| | | | Signed-off-by: Joshua Peek <josh@joshpeek.com>
* Don't share attribute matchers between classes [#3216 state:resolved]Sam Pohlenz2009-10-071-0/+20
| | | | | | | Allows separate models that include ActiveModel::AttributeMethods to use different sets of attribute matchers. Signed-off-by: Joshua Peek <josh@joshpeek.com>
* Use ActiveModel::TestCase base classJeremy Kemper2009-09-243-4/+4
|
* Ensure validation errors to be ordered in declared orderAkira Matsuda2009-09-111-0/+16
| | | | | | [#2301 state:committed milestone:2.3.5] Signed-off-by: Jeremy Kemper <jeremy@bitsweat.net>
* Changed ActiveRecord to use new callbacks and speed up observers by only ↵José Valim2009-09-084-23/+10
| | | | | | notifying events that are actually being consumed. Signed-off-by: Joshua Peek <josh@joshpeek.com>
* Fix warnings in AMoJoshua Peek2009-09-054-47/+4
|
* Fix failing AMo isolated testsJoshua Peek2009-09-054-0/+7
|
* added proc and symbol support to validates_numericality_of [#3049 ↵Kane2009-08-311-0/+18
| | | | | | state:resolved] Signed-off-by: Joshua Peek <josh@joshpeek.com>