aboutsummaryrefslogtreecommitdiffstats
path: root/activemodel/test
Commit message (Collapse)AuthorAgeFilesLines
* Really make include_root_in_json default to true [#3770 state:resolved]José Valim2010-06-081-15/+21
|
* Fix xml serialization test [#4650 state:resolved]Anil Wadghule2010-05-191-2/+5
| | | | Signed-off-by: José Valim <jose.valim@gmail.com>
* Use better assertion methods for testingNeeraj Singh2010-05-194-5/+5
| | | | | | [#4645 state:resolved] Signed-off-by: José Valim <jose.valim@gmail.com>
* Add a valid hex that shouldn't be valid to ActiveModel numericality tests ↵rohit2010-05-181-1/+1
| | | | | | [#4622 state:commited] Signed-off-by: José Valim <jose.valim@gmail.com>
* Valid hex strings aren't valid float column values, to match the integer ↵Jeremy Kemper2010-05-171-1/+1
| | | | restriction. [#4622 state:resolved]
* Make use of assert_equal to test equallity between object assert expects and ↵Santiago Pastorino2010-05-162-3/+3
| | | | | | | | object and a message of error [#4611 state:committed] Signed-off-by: José Valim <jose.valim@gmail.com>
* Revert "Make ActiveModel::Errors#add_on_blank and #add_on_empty accept an ↵José Valim2010-05-152-73/+73
| | | | | | | | options hash and make various Validators pass their (filtered) options." Having a huge array to whitelist options is not the proper way to handle this case. This means that the ActiveModel::Errors object should know about the options given in *all* validators and break the extensibility added by the validators itself. If the intent is to whitelist options before sending them to I18n, each validator should clean its respective options instead of throwing the responsibility to the Errors object. This reverts commit bc1c8d58ec45593acba614d1d0fecb49adef08ff.
* Make ActiveModel::Errors#add_on_blank and #add_on_empty accept an options ↵Jeroen van Dijk2010-05-152-73/+73
| | | | | | | | | | | | | | | | | | | | hash and make various Validators pass their (filtered) options. This makes it possible to pass additional options through Validators to message generation. E.g. plugin authors want to add validates_presence_of :foo, :format => "some format". Also, cleanup the :default vs :message options confusion in ActiveModel validation message generation. Also, deprecate ActiveModel::Errors#add_on_blank(attributes, custom_message) in favor of ActiveModel::Errors#add_on_blank(attributes, options). Original patch by Sven Fuchs, some minor changes and has been changed to be applicable to master again [#4057 state:committed] Signed-off-by: Jeremy Kemper <jeremy@bitsweat.net>
* validation macros can now be used within an instanceJosh Kalderimis2010-05-132-0/+25
|
* Revert "Refactor of active_model/naming.rb and allow collection and element ↵Santiago Pastorino2010-05-121-30/+0
| | | | | | | | to be writable" This reverts commit f7862b2c34b5b298bf7b937c55f0637ebfe43a25. Signed-off-by: José Valim <jose.valim@gmail.com>
* Make ActiveResource serialize XML correctly when element_name is set.Santiago Pastorino2010-05-121-2/+2
| | | | | | [#4529] Signed-off-by: Jeremy Kemper <jeremy@bitsweat.net>
* Refactor of active_model/naming.rb and allow collection and element to be ↵Santiago Pastorino2010-05-121-0/+30
| | | | | | writable Signed-off-by: Jeremy Kemper <jeremy@bitsweat.net>
* removed AR from all AMo tests, including any unneeded files (schema, ↵Josh Kalderimis2010-05-0918-128/+12
| | | | fixtures and test helper)
* removed an old unused model in the AMo tests which also removes another AR ↵Josh Kalderimis2010-05-099-14/+0
| | | | dependency
* removed use of AR in AMo tests and removed testing of scopes (:on) in ↵Josh Kalderimis2010-05-0814-289/+240
| | | | individual validation tests and moved them to their own test file
* Active Model JSON serializer now supports custom root optionJatinder Singh2010-05-041-0/+16
| | | | | | [#4515 state:committed] Signed-off-by: Jeremy Kemper <jeremy@bitsweat.net>
* Favor %{} in all code instead of (deprecated) {{}} as interpolation syntax ↵Lawrence Pit2010-05-038-37/+37
| | | | | | for I18n Signed-off-by: José Valim <jose.valim@gmail.com>
* test cases for record.to_xml [#458 state:resolved]Neeraj Singh2010-04-302-0/+16
| | | | Signed-off-by: José Valim <jose.valim@gmail.com>
* array.to_xml should be able to handle all types of data elements [#4490 ↵Neeraj Singh2010-04-291-2/+5
| | | | | | state:resolved] Signed-off-by: José Valim <jose.valim@gmail.com>
* Fix validates_numericaly_of only integer error message [#4406 state:resolved]reu2010-04-251-9/+9
| | | | Signed-off-by: José Valim <jose.valim@gmail.com>
* Fix Active Model observer testsJeremy Kemper2010-04-161-2/+0
|
* Re-define empty? for errors to check if the values inside the OrderedHash ↵Ryan Bigg2010-04-101-0/+6
| | | | | | are empty rather than the OrderedHash itself. [#4356 state:resolved] Signed-off-by: José Valim <jose.valim@gmail.com>
* errors.rb needs to be declared as UTF-8 [#3941 state:resolved]Aaron Patterson2010-04-021-0/+10
| | | | Signed-off-by: wycats <wycats@gmail.com>
* Restore changed_attributes method in ActiveModel::Dirty and loosen ↵Sam Pohlenz2010-04-011-1/+0
| | | | | | | | expectation on including class' initialize method. [#4308 state:committed] Signed-off-by: Jeremy Kemper <jeremy@bitsweat.net>
* Fix tests added in previous commit.José Valim2010-03-271-0/+1
|
* ActiveModel::Dirty#changes should return a HashWithIndifferentAccess [#4157 ↵Jacob Atzen2010-03-271-0/+29
| | | | | | | | state:resolved] Keep the Rails style of inject Signed-off-by: José Valim <jose.valim@gmail.com>
* ensure activemodel lib is setup correctlyJoshua Peek2010-02-281-0/+3
|
* Accept array of attributes as arg also, like 2.3Jeremy Kemper2010-02-251-10/+16
|
* Revert "Fix test load paths for those not using bundler"Carlhuda2010-02-232-9/+2
| | | | | | This reverts commit eec2d301d4ce9df9c71c1a5aa63053eb970b6818. This commit broke tests. You cannot have a file called "bundler" on the load path.
* Fix AMo isolated tests.José Valim2010-02-221-1/+1
|
* Add validators reflection so you can do 'Person.validators' and ↵Prem Sichanugrist2010-02-212-0/+28
| | | | | | 'Person.validators_on(:name)'. Signed-off-by: José Valim <jose.valim@gmail.com>
* Require persisted? in ActiveModel::Lint and remove new_record? and ↵José Valim2010-02-213-7/+6
| | | | destroyed? methods. ActionPack does not care if the resource is new or if it was destroyed, it cares only if it's persisted somewhere or not.
* Add to_key and to_param methods to ActiveModel::Conversion.José Valim2010-02-213-16/+34
|
* AMo #key is now #to_key and CI is probably happysnusnu2010-02-201-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Obviously #key is a too common name to be included in the AMo interface, #to_key fits better and also relates nicely to #to_param. Thx wycats, koz and josevalim for the suggestion. AR's #to_key implementation now takes customized primary keys into account and there's a testcase for that too. The #to_param AMo lint makes no assumptions on how the method behaves in the presence of composite primary keys. It leaves the decision wether to provide a default, or to raise and thus signal to the user that implementing this method will need his special attention, up to the implementers. All AMo cares about is that #to_param is implemented and returns nil in case of a new_record?. The default CompliantObject used in lint_test provides a naive default implementation that just joins all key attributes with '-'. The #to_key default implementation in lint_test's CompliantObject now returns [id] instead of [1]. This was previously causing the (wrong) tests I added for AR's #to_key implementation to pass. The #to_key tests added with this patch should be better. The CI failure was caused by my lack of knowledge about the test:isolated task. The tests for the record_identifier code in action_controller are using fake non AR models and I forgot to stub the #to_key method over there. This issue didn't come up when running the test task, only test:isolated revealed it. This patch fixes that. All tests pass isolated or not, well, apart from one previously unpended test in action_controller that is unrelated to my patch.
* Adds #key and #to_param to the AMo interfacesnusnu2010-02-191-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit introduces two new methods that every AMo compliant object must implement. Below are the default implementations along with the implied interface contract. # Returns an Enumerable of all (primary) key # attributes or nil if new_record? is true def key new_record? ? nil : [1] end # Returns a string representing the object's key # suitable for use in URLs, or nil if new_record? # is true def to_param key ? key.first.to_s : nil end 1) The #key method Previously rails' record_identifier code, which is used in the #dom_id helper, relied on calling #id on the record to provide a reasonable DOM id. Now with rails3 being all ORM agnostic, it's not safe anymore to assume that every record ever will have an #id as its primary key attribute. Having a #key method available on every AMo object means that #dom_id can be implemented using record.to_model.key # instead of record.id Using this we're able to take composite primary keys into account (e.g. available in datamapper) by implementing #dom_id using a newly added record_key_for_dom_id(record) method. The user can overwrite this method to provide customized versions of the object's key used in #dom_id. Also, dealing with more complex keys that can contain arbitrary strings, means that we need to make sure that we only provide DOM ids that are valid according to the spec. For this reason, this patch sends the key provided through a newly added sanitize_dom_id(candidate_id) method, that makes sure we only produce valid HTML The reason to not just add #dom_id to the AMo interface was that it feels like providing a DOM id should not be a model concern. Adding #dom_id to the AMo interface would force these concern on the model, while it's better left to be implemented in a helper. Now one could say the same is true for #to_param, and actually I think that it doesn't really fit into the model either, but it's used in AR and it's a main part of integrating into the rails router. This is different from #dom_id which is only used in view helpers and can be implemented on top of a semantically more meaningful method like #key. 2) The #to_param method Since the rails router relies on #to_param to be present, AR::Base implements it and returns the id by default, allowing the user to overwrite the method if desired. Now with different ORMs integrating into rails, every ORM railtie needs to implement it's own #to_param implementation while already providing code to be AMo compliant. Since the whole point of AMo compliance seems to be to integrate any ORM seamlessly into rails, it seems fair that all we really need to do as another ORM, is to be AMo compliant. By including #to_param into the official interface, we can make sure that this code can be centralized in the various AMo compliance layers, and not be added separately by every ORM railtie. 3) All specs pass
* Fix test load paths for those not using bundlerJoshua Peek2010-02-152-2/+9
|
* Get rails tests running on bundler 0.9Carl Lerche2010-01-311-7/+1
|
* Axe AM state machineJoshua Peek2010-01-305-560/+0
| | | | We're going do it eventually, get it done before 3.0 is final.
* Drop AR I18n deprecation and simple use errors.messages as fallback.José Valim2010-01-301-14/+14
|
* Adding Proc support to validation messages so that they can become a little ↵Samuel Elliott2010-01-171-0/+8
| | | | | | more dynamic, allowing for customisations during the request [#3514 status:resolved]. Signed-off-by: José Valim <jose.valim@gmail.com>
* Fix typos and add tests to ensure they will be caught the next time.José Valim2010-01-111-0/+8
|
* Fix typo by renaming :genre to :gender.José Valim2010-01-092-7/+7
|
* Allow validates to map some types to specific options. So now you can do:José Valim2010-01-082-12/+38
| | | | | | validates :email, :presence => true, :format => /@/ validates :genre, :inclusion => %w(m f) validates :password, :length => 6..20
* Compile length validator options still at the class level, so whenever the ↵José Valim2010-01-081-4/+2
| | | | validator is called, it just needs to check for :maximum, :minimum and :is values.
* Allow :if, :unless, :on, :allow_nil and :allow_blank as shared options in ↵José Valim2010-01-072-3/+42
| | | | validates.
* Add validates method as shortcut to setup validators for a given set of ↵jamie2010-01-075-2/+92
| | | | | | | | | | | | | | | attributes: class Person < ActiveRecord::Base include MyValidators validates :name, :presence => true, :uniqueness => true, :length => { :maximum => 100 } validates :email, :presence => true, :email => true end [#3058 status:resolved] Signed-off-by: José Valim <jose.valim@gmail.com>
* Allow to specify default attributes names translation in I18n yml files.José Valim2010-01-071-0/+5
| | | | | | | | | | | | For example, you could easily specify :created_at and :updated_at translations as: en: attributes: created_at: "Created at" updated_at: "Updated at" This configuration is built on ActiveModel, so it means those translations are shared between different ORMs as well (but always as a fallback).
* Be sure to dup load paths before clearing the array.José Valim2010-01-071-1/+1
|
* Errors messages are now moved from :activerecord.errors to simply :errors on ↵José Valim2010-01-072-80/+44
| | | | I18n yml files.
* Autoload AR test caseJoshua Peek2010-01-041-2/+0
|