aboutsummaryrefslogtreecommitdiffstats
path: root/actionpack/test/controller
Commit message (Collapse)AuthorAgeFilesLines
...
* Fix Rubocop violations and fix documentation visibilityRafael Mendonça França2016-12-281-1/+1
| | | | | | Some methods were added to public API in 5b14129d8d4ad302b4e11df6bd5c7891b75f393c and they should be not part of the public API.
* assert_equal takes expectation firstAkira Matsuda2016-12-262-3/+3
|
* "Use assert_nil if expecting nil from ...:in `...'. This will fail in ↵Akira Matsuda2016-12-251-2/+1
| | | | minitest 6."
* "Use assert_nil if expecting nil from ...:in `...'. This will fail in MT6."Akira Matsuda2016-12-251-4/+4
|
* "Use assert_nil if expecting nil. This will fail in minitest 6."Akira Matsuda2016-12-255-10/+10
|
* Privatize unneededly protected methods in Action Pack testsAkira Matsuda2016-12-239-21/+19
|
* Document and update API for `skip_parameter_encoding`Aaron Patterson2016-12-211-31/+8
| | | | | | | | This commit changes `parameter_encoding` to `skip_parameter_encoding`. `skip_parameter_encoding` will set encoding on all parameters to ASCII-8BIT for a given action on a particular controller. This allows the controller to handle data when the encoding of that data is unknown, for example file systems or truly binary parameters.
* Merge pull request #27414 from matthewd/fix-xml-vs-html-assertionMatthew Draper2016-12-211-12/+12
|\ | | | | Revise the "XML is not HTML" test
| * Revise the "XML is not HTML" testMatthew Draper2016-12-201-12/+12
| | | | | | | | | | | | It was depending on a side-effect of the old html-scanner, so was no longer proving what it intended to. Instead, assert more directly about the resulting observable difference.
* | Only default the response charset when it is first setMatthew Draper2016-12-201-1/+8
|/ | | | | If it is explicitly cleared (e.g., response.sending_file = true), then we should not try to set it again.
* use public Module#include instead of send :includeyuuji.yaginuma2016-11-271-1/+1
| | | | Follow up to #18767
* Use accept header instead of mangling request path.Kasper Timm Hansen2016-11-231-2/+25
| | | | | | | | | | | | | | Instead of appending a format to the request, it's much better to just pass a more appropriate accept header. Rails will figure out the format from that instead. This allows devs to use `:as` on routes that don't have a format. Introduce an `IdentityEncoder` to avoid `if request_encoder`, essentially a better version of the purpose of the `WWWFormEncoder`. One that makes conceptual sense on GET requests too. Fixes #27144.
* Fix `ActionDispatch::IntegrationTest#open_session`Tawan Sierek2016-11-181-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reset a new session directly after its creation in `ActionDispatch::IntegrationTest#open_session`. Reset the session to a clean state before making it available to the client's test code. Issue #22742 reports unexpected behavior of integration tests that run multiple sessions. For example an `ActionDispatch::Flash` instance is shared across multiple sessions, though a client code will rightfully assume that each new session has its own flash hash. The following test failed due to this behavior: class Issue22742Test < ActionDispatch::IntegrationTest test 'issue #22742' do integration_session # initialize first session a = open_session b = open_session refute_same(a.integration_session, b.integration_session) end end Instead of creating a new `ActionDispatch::Integration::Session` instance, the same instance is shared across all newly opened test sessions. This is due to the way how new test sessions are created in `ActionDispatch::IntegrationTest#open_session`. The already existing `ActionDispatch::IntegrationTest` instance is duplicated with `Object#dup`, This approach was introduced in commit 15c31c7639b. `Object#dup` copies the instance variables, but not the objects they reference. Therefore this issue only occurred when the current test instance had been tapped in such a way that the instance variable `@integration_session` was initialized before creating the new test session. Close #22742 [Tawan Sierek + Sina Sadeghian]
* Fixed CONTENT_LENGTH header in ActionController::TestRequestArtem Rashev2016-11-151-0/+10
| | | | | | | | | | | | | CONENT_LENGTH setted by string length, which is equal to number of characters in string but StringIO.length is byte sequence and when payload contains non-ASCII characters, stream's length will be different. That's why real byte length should be used for CONTENT_LENGTH header. Add unit test for CONTENT_LENGTH header fix It just passes non-ascii symbols as parameters and verifies that "CONTENT_LENGTH" header has content bytes count as value.
* Fix style violationsRafael Mendonça França2016-11-141-1/+1
|
* Merge pull request #27007 from maclover7/jm-fix-26912Rafael Mendonça França2016-11-131-0/+10
|\ | | | | | | Don't error on an empty CONTENT_TYPE
| * Don't error on an empty CONTENT_TYPEJon Moss2016-11-101-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit prevents a possible issue wherein an empty CONTENT_TYPE header is sent in a request to a Rails application, and then `request.content_mime_type` would return `nil`. This is because the `has_content_type?` guard method was not properly checking the validity of a request's content type; it was only checking to see whether or not the header existed, not whether it had a value stored inside. Relatedly, after an internal discussion, it was determined that the `has_content_type?` method is not meant to be part of the public API, and is therefore changed to a `:nodoc:` method in this commit. The test for this behavior is a little bit ugly, for two reasons. One is that it was difficult to determine where to place the test... I figured the best place would be with the rest of the ParamsWrapper stuff, since that's where the original issue was. Also, we have to do some fancy footwork in calling `dispatch` on the test's controller manually... this is because `ActionController::TestCase` will throw an error if you try and pass in a nil content type, which is exactly what we are trying to test here... Because of that, we have to manually call in to the controller, and bypass the `post` request helper. Fixes #26912. This is a regression in behavior between Rails versions 4.2.x and 5.0.x, which was introduced via [this commit](https://github.com/rails/rails/commit/a9f28600e901b11a9222e34bfae8642bfb753186).
* | significant speedup of AC::Parameters#permitXavier Noria2016-11-121-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current implementation of AC::Parameters#permit builds permitted hashes and then calls permit! on them. This filtering is recursive, so we call permit! on terminal branches, but then ascendants call permit! on themselves when the recursion goes up the stack, which recurses all the way down again because permit! is recursive itself. Repeat this for every parent node and you get some scary O-something going on that I don't even want to compute. Instead, since the whole point of the permit recursion is to build permitted hashes along the way and at that point you know you've just come up with a valid filtered version, you can already switch the toggle on the spot. I have seen 2x speedups in casual benchmarks with small structures. As the previous description shows, the difference in performance is going to be a function of the nesting. Note that that the involved methods are private and used only by permit.
* | adds support for arbitrary hashes in strong parametersXavier Noria2016-11-111-0/+33
| |
* | Merge pull request #26820 from y-yagi/add_bang_merge_to_parametersRafael França2016-11-101-0/+17
|\ \ | |/ |/| add `ActionController::Parameters#merge!`
| * add `ActionController::Parameters#merge!`yuuji.yaginuma2016-10-181-0/+17
| | | | | | | | | | This method has the same behavior as `Hash#merge!`, returns current `ActionController::Parameters`.
* | Show what was the error when assertion has failedAkira Matsuda2016-11-051-1/+1
| | | | | | | | this test case fails with ruby 2.4, so we want to see what's actually happening
* | Add more rubocop rules about whitespacesRafael Mendonça França2016-10-2917-158/+158
| |
* | Remove mona lisa image from the testsRafael Mendonça França2016-10-252-18/+18
| | | | | | | | | | This image has copyright that we are not giving so it is better to use one image that we own the copyright.
* | Soften this test since YAML.dump may produce keys in other orders.Charles Oliver Nutter2016-10-211-6/+4
| |
* | Revert "Undefine assings in IntegrationTest"Rafael Mendonça França2016-10-211-8/+0
|/ | | | | | This reverts commit 5dde413e1d14c42eb87071db20d075a7b962cb01. Reason: The gem defines it so we don't need to remove
* Allow any key in Renderer environment hashSammy Larbi2016-10-151-0/+8
| | | | | | When rendering arbitrary templates, it is helpful to not overwrite `env` keys with nil if they don't match any found in the `RACK_KEY_TRANSLATION` This allows the developer to set the environment to exactly what is needed for rendering.
* ActionController::Parameters#deep_dup (#26567)Pavel Evstigneev2016-10-111-0/+22
| | | | | | | | | | | * ActionController::Parameters#deep_dup * Tests for ActionController::Parameters#deep_dup * Fix test for ActionController::Parameters#deep_dup * More tests for ActionController::Parameters#deep_dup [Rafael Mendonça França + Pavel Evstigneev]
* Remove deprecated support to non-keyword arguments in ↵Rafael Mendonça França2016-10-101-55/+0
| | | | | | `ActionDispatch::IntegrationTest`, `#process`, `#get`, `#post`, `#patch`, `#put`, `#delete`, and `#head`.
* Remove deprecated `ActionDispatch::IntegrationTest#*_via_redirect`.Rafael Mendonça França2016-10-101-89/+0
|
* Remove deprecated `ActionDispatch::IntegrationTest#xml_http_request`Rafael Mendonça França2016-10-101-102/+4
|
* Remove deprecated support to non-keyword arguments #processRafael Mendonça França2016-10-101-111/+0
|
* Remove deprecated `xml_http_request` and `xhr` methodsRafael Mendonça França2016-10-101-15/+0
|
* Remove deprecated methods in ActionController::ParametersRafael Mendonça França2016-10-101-7/+1
|
* Remove deprecated comparing support with `ActionController::Parameters`Rafael Mendonça França2016-10-101-8/+0
|
* Remove deprecated support to :text in renderRafael Mendonça França2016-10-102-200/+0
|
* Remove deprecated support to :nothing in renderRafael Mendonça França2016-10-091-10/+0
|
* Remove deprecated support to `:back` in `redirect_to`Rafael Mendonça França2016-10-091-42/+0
|
* Remove deprecated support for status option in headRafael Mendonça França2016-10-091-21/+0
|
* Remove deprecated methods related to controller filtersRafael Mendonça França2016-10-091-29/+1
| | | | | | | | | | `skip_action_callback`, `skip_filter`, `before_filter`, `prepend_before_filter`, `skip_before_filter`, `append_before_filter`, `around_filter` `prepend_around_filter`, `skip_around_filter`, `append_around_filter`, `after_filter`, `prepend_after_filter`, `skip_after_filter` and `append_after_filter`.
* Silence a warningRafael Mendonça França2016-10-071-1/+3
|
* Undefine assings in IntegrationTestRafael Mendonça França2016-10-071-0/+8
| | | | | assigns assert the state of a controller instance what should not be done in an integration test.
* Merge pull request #26573 from kirs/action-controller-as-formatRafael França2016-09-271-0/+5
|\ | | | | Make :as option also set request format (AC::TestCase)
| * Make :as option also set request format (AC::TestCase)Kir Shatrov2016-09-211-0/+5
| | | | | | | | | | | | | | | | right now you'd have to specify both :as and :format: ``` post :create, params: { foo: "bar" } as: :json, format: :json ```
* | Only search fixture_path for files that can't be found directlyMatthew Draper2016-09-241-0/+7
| | | | | | | | | | | | | | | | | | | | When passed an already-valid file name, prepending the path is likely to create problems. This is particularly relevant for #26384, which adds fixture_path handling to test classes that previously didn't have it: any existing caller must have been manually locating the file, and we don't want to break them.
* | improve error message when include assertions failMichael Grosser2016-09-165-16/+16
| | | | | | | | | | | | assert [1, 3].includes?(2) fails with unhelpful "Asserting failed" message assert_includes [1, 3], 2 fails with "Expected [1, 3] to include 2" which makes it easier to debug and more obvious what went wrong
* | Fix broken comments indentation caused by rubocop auto-correct [ci skip]Ryuta Kamizono2016-09-141-1/+1
| | | | | | | | | | | | All indentation was normalized by rubocop auto-correct at 80e66cc4d90bf8c15d1a5f6e3152e90147f00772. But comments was still kept absolute position. This commit aligns comments with method definitions for consistency.
* | Do not mutate AC::TestRequest::DEFAULT_OPTIONSKir Shatrov2016-09-101-0/+5
|/
* call `.to_h` to avoid using deprecated methodyuuji.yaginuma2016-09-071-0/+7
| | | | | | | | | | | `ActionController::Parameters#merge` call `HashWithIndifferentAccess#merge`. In addition, it calls `HashWithIndifferentAccess#update` from `HashWithIndifferentAccess#merge`, where it is called the `#to_hash` of argument. But `ActionController::Parameters#to_hash` is deprecated, warning message is displayed. To avoid this, modify to convert object to `Hash`. Fixes #26415
* make `fixture_file_upload` work in integration testsyuuji.yaginuma2016-09-041-0/+36
| | | | | | | | | Currently, `fixture_file_upload` does not work in integration test. Because, `TestProcess` module has been include in `Session` class, but `fixture_path` can not get from `Session` class. Modify to include `TestProcess` in `IntegrationTest` class in order to get correct value of `fixture_path`.