aboutsummaryrefslogtreecommitdiffstats
path: root/actionpack/lib/action_controller/metal
Commit message (Collapse)AuthorAgeFilesLines
* Make sure the flash method is defined even if helpers are not presentRafael Mendonça França2018-09-131-5/+3
|
* Merge pull request #33569 from eric-hemasystems/conditional-flash-helperRafael França2018-09-131-3/+5
|\ | | | | Conditionally use `helper_method` in Flash concern
| * Conditionally use `helper_method` in Flash concernEric Anderson2018-08-091-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I was attempting to use the `flash` functionality in a `Metal` controller. When including the `flash` concern I received the following error: NoMethodError: undefined method `helper_method'.... Either: - `AbstractController::Helpers` should be a dependency of `ActionController::Flash` - `ActionController::Flash` should not require the existence of `AbstractController::Helpers`. Since my use case (set a flash and redirect) has no need for the helper method and that is a common use case, making the dependency conditional seemed the better option. NOTE: This is similar to issue #21067 only the error is within Rails itself while that issue had the error within Devise.
* | Update documentation to ActionController::ConditionalGetAnatoly Mikhaylov2018-09-031-0/+6
| | | | | | | | Two implemented but undocumented features are to help indicate that cache is fresh for 3 hours, and it may continue to be served stale for up to an additional 60 seconds to parallel requests for the same resource or up to 5 minutes while errors are being returned back while the initial synchronous revalidation is attempted.
* | Faster permitted_scalar_filterschneems2018-08-311-8/+20
| | | | | | | | | | | | | | | | | | | | | | When running with code triage and derailed benchmarks and focusing on this file: Before 16199 /Users/rschneeman/Documents/projects/rails/actionpack/lib/action_controller/metal/strong_parameters.r After 2280 /Users/rschneeman/Documents/projects/rails/actionpack/lib/action_controller/metal/strong_parameters.rb
* | [ci skip] Document permitted_scalar_filterschneems2018-08-301-0/+10
| |
* | Merge pull request #33718 from kddeisz/permit-listMatthew Draper2018-08-295-12/+12
|\ \ | | | | | | Finish converting whitelist and blacklist references
| * | Permit list usage cleanup and clearer documentationKevin Deisz2018-08-272-4/+4
| | |
| * | Convert remaining usage of whitelist and blacklistKevin Deisz2018-08-241-2/+2
| | |
| * | Convert over the rest of the whitelist referencesKevin Deisz2018-08-244-8/+8
| | |
* | | Call block to #redirect_to in controller context (#33735)speckins2018-08-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Call block to #redirect_to in controller context The documentation for ActionController::Redirecting states that a Proc argument "will be executed in the controller's context." However, unless #instance_eval is used (removed in 6b3ad0ca), that statement is false for procs defined outside of the controller instance. This commit restores the documented behavior. Fixes #33731. * Move test proc into a constant in another class Per @rafaelfranca's suggestion. [Steven Peckins + Rafael Mendonça França]
* | | Format respond_to method as code in doc [ci skip]Rob Zolkos2018-08-251-1/+1
|/ / | | | | | | | | This updates the `respond_to` method to be code formatted rather than plain text (as it refers to the method)
* | Use string lengths instead of regexp to extract pathMatthew Draper2018-08-231-2/+1
| | | | | | | | | | | | | | | | | | | | The regexp was introduced in 186ac4cdaa911a9af659a29f2179a19b99dea13b, and looks cosmetic. While they should be functionally identical in theory, in practice, case insensitive (but preserving) filesystems can give results that are differently-cased from the pattern we supplied. I don't know how to force the filesystem to do the surprising thing, even when running in an environment that _could_, so no new test.
* | Fix rubocop offensesbogdanvlviv2018-08-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Layout/TrailingWhitespace ``` actionpack/lib/action_controller/metal/request_forgery_protection.rb:49:4: C: Layout/TrailingWhitespace: Trailing whitespace detected. # ^ ``` Related to c3787494eda - Performance/StartWith ``` tasks/release.rb:108:44: C: Performance/StartWith: Use String#start_with? instead of a regex match anchored to the beginning of the string. header += "* No changes.\n\n\n" if current_contents =~ /\A##/ ```
* | Merge pull request #31640 from gingerlime/patch-1Richard Schneeman2018-08-101-4/+11
|\ \ | |/ |/| fixes #27157 CSRF protection documentation
| * fixes #27157 CSRF protection documentationgingerlime2018-01-051-4/+11
| | | | | | | | | | * removed reference to GET requests where it applies also to other HTTP verbs * updated documentation to try and better explain how CSRF protection works with XHR, and the potential exposure with CORS
* | Merge pull request #28937 from maclover7/jm-fix-28927Rafael França2018-07-311-1/+1
|\ \ | | | | | | Default content type for `head` is `text/html`
| * | Default content type for `head` is `text/html`Jon Moss2017-04-301-1/+1
| | | | | | | | | | | | Otherwise Mime::NullType will be returned as the `Content-Type` header.
* | | Raises exception when respond_to called multiple times in incompatible wayPatrick Toomey2018-07-302-0/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Nesting respond_to calls can lead to unexpected behavior, so it should be avoided. Currently, the first respond_to format match sets the content-type for the resulting response. But, if a nested respond_to occurs, it is possible to match on a different format. For example: respond_to do |outer_type| outer_type.js do respond_to do |inner_type| inner_type.html { render body: "HTML" } end end end Browsers will often include */* in their Accept headers. In the above example, such a request would result in the outer_type.js match setting the content- type of the response to text/javascript, while the inner_type.html match will cause the actual response to return "HTML". This change tries to minimize potential breakage by only raising an exception if the nested respond_to calls are in conflict with each other. So, something like the following example would not raise an exception: respond_to do |outer_type| outer_type.js do respond_to do |inner_type| inner_type.js { render body: "JS" } end end end While the above is nested, it doesn't affect the content-type of the response.
* | | Merge pull request #32381 from q-centrix/update-codeclimate-configsRichard Schneeman2018-07-251-3/+1
|\ \ \ | | | | | | | | Turn on performance based cops
| * | | Turn on performance based copsDillon Welch2018-07-231-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use attr_reader/attr_writer instead of methods method is 12% slower Use flat_map over map.flatten(1) flatten is 66% slower Use hash[]= instead of hash.merge! with single arguments merge! is 166% slower See https://github.com/rails/rails/pull/32337 for more conversation
* | | | Rails guides are now served over httpsPaul McMahon2018-07-241-1/+1
|/ / / | | | | | | | | | | | | http links will be redirected to the https version, but still better to just directly link to the https version.
* | | Clarify example of the test `ActionController::HttpAuthentication::Token` ↵bogdanvlviv2018-07-211-4/+3
| | | | | | | | | | | | | | | | | | [ci skip] Follow up #33401, 5491f8115711d8b34d52f8ba5e52ba39a49b08fe.
* | | [ci skip] Fix syntax error + make example easier to follow.Kasper Timm Hansen2018-07-201-2/+3
| | | | | | | | | | | | Follow up to 9f152a606
* | | Fix basic auth problem in ActionController::HttpAuthentication::Basic doc黄松2018-07-201-2/+2
| | |
* | | Convert hashes into parameters (#33076)Kevin Sjöberg2018-06-191-10/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Convert hashes into parameters Ensure `ActionController::Parameters#transform_values` and `ActionController::Parameters#transform_values!` converts hashes into parameters. * fixup! Convert hashes into parameters [Rafael Mendonça França + Kevin Sjöberg]
* | | Add support for more HTTP cache controlsDaniel Schierbeck2018-06-131-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | From <https://tools.ietf.org/html/rfc5861>: > The stale-if-error HTTP Cache-Control extension allows a cache to > return a stale response when an error -- e.g., a 500 Internal Server > Error, a network segment, or DNS failure -- is encountered, rather > than returning a "hard" error. This improves availability. > > The stale-while-revalidate HTTP Cache-Control extension allows a > cache to immediately return a stale response while it revalidates it > in the background, thereby hiding latency (both in the network and on > the server) from clients. These are useful, fully standardized parts of the HTTP protocol with widespread support among CDN vendors. Supporting them will make it easier to utilize reverse proxies and CDNs from Rails.
* | | Avoid unused capture in `non_xhr_javascript_response?`Ryuta Kamizono2018-05-311-1/+1
| | |
* | | Include application/javascript when checking content_typeGabriel Jaldon2018-05-271-1/+1
| | |
* | | Speed up xor_byte_strings by 70%Jeremy Evans2018-05-181-3/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Benchmark: ```ruby require 'benchmark' require 'benchmark/ips' require 'securerandom' def xor_byte_strings(s1, s2) # :doc: s2_bytes = s2.bytes s1.each_byte.with_index { |c1, i| s2_bytes[i] ^= c1 } s2_bytes.pack("C*") end def xor_byte_strings_new(s1, s2) # :doc: s2 = s2.dup size = s1.bytesize i = 0 while i < size s2.setbyte(i, s1.getbyte(i) ^ s2.getbyte(i)) i += 1 end s2 end s1 = SecureRandom.random_bytes(32) s2 = SecureRandom.random_bytes(32) Benchmark.ips do |x| x.report("current"){xor_byte_strings(s1, s2)} x.report("new"){xor_byte_strings_new(s1, s2)} x.compare! end 100000.times do |i| s3 = SecureRandom.random_bytes(32) s4 = SecureRandom.random_bytes(32) raise unless xor_byte_strings(s3, s4) == xor_byte_strings_new(s3, s4) end ``` Results on ruby 2.5.1: ``` Warming up -------------------------------------- current 6.519k i/100ms new 10.508k i/100ms Calculating ------------------------------------- current 84.723k (_ 0.4%) i/s - 423.735k in 5.001456s new 145.871k (_ 0.3%) i/s - 735.560k in 5.042606s Comparison: new: 145870.6 i/s current: 84723.4 i/s - 1.72x slower ```
* | | Fix documentation for ActionController::Params#fetchLinus Marton2018-05-181-1/+3
| | | | | | | | | | | | | | | Make it clear that the return value is converted to an instance of ActionController::Parameters if possible
* | | Merge pull request #29286 from vinistock/create_missing_exact_template_exceptionRafael Mendonça França2018-04-202-12/+5
|\ \ \ | | | | | | | | | | | | Create MissingExactTemplate exception with separate template
| * | | Create MissingExactTemplate exception with separate templateVinicius Stock2018-04-202-12/+5
| | | |
* | | | Fixes StrongParameters permit! to work with nested arraysSteve Hull2018-04-161-1/+1
| | | | | | | | | | | | | | | | | | | | `permit!` is intended to mark all instances of `ActionController::Parameters` as permitted, however nested arrays of params were not being marked permitted because the method did shallow iteration. This fixes that by flattening the array before calling `permit!` on all each item.
* | | | Merge pull request #32484 from kddeisz/default-headersRafael França2018-04-101-0/+17
|\ \ \ \ | | | | | | | | | | Include default headers by default in API mode
| * | | | Include default headers by default in API modeKevin Deisz2018-04-061-0/+17
| | | | | | | | | | | | | | | | | | | | ActionDispatch's default headers are now moved into their own module that are by default included in both Base and API. This allows API-mode applications to take advantage of the default security headers, as well as providing an easy way to add more.
* | | | | Improve the null origin error messagePatrik Bóna2018-04-091-1/+1
|/ / / /
* | | | Remove superfluous `ActionController::`Francois Chagnon2018-04-041-1/+1
| | | |
* | | | Merge pull request #32336 from vincedevendra/allow_mutating_dig_return_valueAaron Patterson2018-04-021-1/+2
|\ \ \ \ | | | | | | | | | | Make mutating params#dig return value mutate underlying params
| * | | | Make mutating params#dig mutate underlying paramsVince DeVendra2018-03-241-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When #dig was called on a params object and return either a Hash or an Array, and that value was subsquently mutated, it would not modify the containing params object. That means that the behavior of `params.dig(:a, :b)[:c] = 1` did not match either `params[:a][:b][:c] = 1` nor `hash.dig(:a, :b)[:c] = 1`. Similarly to `ActionController::Parameters#[]`, use `#convert_hashes_to_parameters` to pre-convert values and insert them in the receiving params object prior to returning them.
* | | | | Deprecate controller level force_sslDerek Prior2018-03-301-55/+14
|/ / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Today there are two common ways for Rails developers to force their applications to communicate over HTTPS: * `config.force_ssl` is a setting in environment configurations that enables the `ActionDispatch::SSL` middleware. With this middleware enabled, all HTTP communication to your application will be redirected to HTTPS. The middleware also takes care of other best practices by setting HSTS headers, upgrading all cookies to secure only, etc. * The `force_ssl` controller method redirects HTTP requests to certain controllers to HTTPS. As a consultant, I've seen many applications with misconfigured HTTPS setups due to developers adding `force_ssl` to `ApplicationController` and not enabling `config.force_ssl`. With this configuration, many application requests can be served over HTTP such as assets, requests that hit mounted engines, etc. In addition, because cookies are not upgraded to secure only in this configuration and HSTS headers are not set, it's possible for cookies that are meant to be secure to be sent over HTTP. The confusion between these two methods of forcing HTTPS is compounded by the fact that they share an identical name. This makes finding documentation on the "right" method confusing. HTTPS throughout is quickly becomming table stakes for all web sites. Sites are expected to operate over HTTPS for all communication, sensitive or otherwise. Let's encourage use of the broader-reaching `ActionDispatch::SSL` middleware and elminate this source of user confusion. If, for some reason, applications need to expose certain endpoints over HTTP they can do so by properly configuring `config.ssl_options`.
* | | | Remove unnecessary `Hash.method_defined?(:dig)` checkingyuuji.yaginuma2018-03-111-13/+11
| | | | | | | | | | | | | | | | Since Rails 6 requires Ruby 2.4.1+.
* | | | Always yield a CSP policy instanceAndrew White2018-03-081-1/+5
| | | | | | | | | | | | | | | | | | | | If the app has the CSP disabled globally allow a controller action to enable the policy for that request.
* | | | Add the ability to disable the global CSP in a controllerAndrew White2018-03-081-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | e.g: class LegacyPagesController < ApplicationController content_security_policy false, only: :index end
* | | | Add support for automatic nonce generation for Rails UJSAndrew White2018-02-191-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Because the UJS library creates a script tag to process responses it normally requires the script-src attribute of the content security policy to include 'unsafe-inline'. To work around this we generate a per-request nonce value that is embedded in a meta tag in a similar fashion to how CSRF protection embeds its token in a meta tag. The UJS library can then read the nonce value and set it on the dynamically generated script tag to enable it to execute without needing 'unsafe-inline' enabled. Nonce generation isn't 100% safe - if your script tag is including user generated content in someway then it may be possible to exploit an XSS vulnerability which can take advantage of the nonce. It is however an improvement on a blanket permission for inline scripts. It is also possible to use the nonce within your own script tags by using `nonce: true` to set the nonce value on the tag, e.g <%= javascript_tag nonce: true do %> alert('Hello, World!'); <% end %> Fixes #31689.
* | | | Rails 6 requires Ruby 2.4.1+Jeremy Daer2018-02-171-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | Skipping over 2.4.0 to sidestep the `"symbol_from_string".to_sym.dup` bug. References #32028
* | | | Remove usage of strip_heredoc in the framework in favor of <<~Rafael Mendonça França2018-02-161-2/+1
|/ / / | | | | | | | | | | | | Some places we can't remove because Ruby still don't have a method equivalent to strip_heredoc to be called in an already existent string.
* | / Fix typos, update documentationJames Lovejoy2018-01-111-2/+2
| |/ |/| | | | | [ci skip]
* | Add missing require for `strip_heredoc`Peter Wagenet2018-01-041-0/+1
| |
* | Added reference to default value of `allow_other_host` [ci skip]Prathamesh Sonpatki2017-12-171-1/+1
| |
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 03:26:49 +0000