diff options
Diffstat (limited to 'railties')
| -rw-r--r-- | railties/CHANGELOG.md | 2 | ||||
| -rw-r--r-- | railties/guides/source/active_record_querying.textile | 36 | ||||
| -rw-r--r-- | railties/guides/source/active_support_core_extensions.textile | 2 | ||||
| -rw-r--r-- | railties/guides/source/layouts_and_rendering.textile | 47 | ||||
| -rw-r--r-- | railties/guides/source/migrations.textile | 533 | ||||
| -rw-r--r-- | railties/test/generators/app_generator_test.rb | 6 |
6 files changed, 463 insertions, 163 deletions
diff --git a/railties/CHANGELOG.md b/railties/CHANGELOG.md index 64abff6cb3..2841996b56 100644 --- a/railties/CHANGELOG.md +++ b/railties/CHANGELOG.md @@ -1,7 +1,7 @@ ## Rails 3.2.0 (unreleased) ## * New applications get a flag - `config.active_record.auto_explain_threshold_in_seconds` in the evironments + `config.active_record.auto_explain_threshold_in_seconds` in the environments configuration files. With a value of 0.5 in development.rb, and commented out in production.rb. No mention in test.rb. *fxn* diff --git a/railties/guides/source/active_record_querying.textile b/railties/guides/source/active_record_querying.textile index 352f23dc01..0cbabd71a1 100644 --- a/railties/guides/source/active_record_querying.textile +++ b/railties/guides/source/active_record_querying.textile @@ -1369,6 +1369,42 @@ EXPLAIN for: SELECT `posts`.* FROM `posts` WHERE `posts`.`user_id` IN (1) under MySQL. +h4. Automatic EXPLAIN + +Active Record is able to run EXPLAIN automatically on slow queries and log its +output. This feature is controlled by the configuration parameter + +<ruby> +config.active_record.auto_explain_threshold_in_seconds +</ruby> + +If set to a number, any query exceeding those many seconds will have its EXPLAIN +automatically triggered and logged. In the case of relations, the threshold is +compared to the total time needed to fetch records. So, a relation is seen as a +unit of work, no matter whether the implementation of eager loading involves +several queries under the hood. + +A threshold of +nil+ disables automatic EXPLAINs. + +The default threshold in development mode is 0.5 seconds, and +nil+ in test and +production modes. + +h5. Disabling Automatic EXPLAIN + +Automatic EXPLAIN can be selectively silenced with +ActiveRecord::Base.silence_auto_explain+: + +<ruby> +ActiveRecord::Base.silence_auto_explain do + # no automatic EXPLAIN is triggered here +end +</ruby> + +That may be useful for queries you know are slow but fine, like a heavyweight +report of an admin interface. + +As its name suggests, +silence_auto_explain+ only silences automatic EXPLAINs. +Explicit calls to +ActiveRecord::Relation#explain+ run. + h4. Interpreting EXPLAIN Interpretation of the output of EXPLAIN is beyond the scope of this guide. The diff --git a/railties/guides/source/active_support_core_extensions.textile b/railties/guides/source/active_support_core_extensions.textile index 76d757f6a7..6646e9cd05 100644 --- a/railties/guides/source/active_support_core_extensions.textile +++ b/railties/guides/source/active_support_core_extensions.textile @@ -2055,7 +2055,7 @@ NOTE: Defined in +active_support/core_ext/enumerable.rb+. h4. +pluck+ -Plucks the value of the passed method for each element and returns the result as an array +The +pluck+ method collects the value of the passed method for each element and returns the result as an array. <ruby> people.pluck(:name) # => [ "David Heinemeier Hansson", "Jamie Heinemeier Hansson" ] diff --git a/railties/guides/source/layouts_and_rendering.textile b/railties/guides/source/layouts_and_rendering.textile index df7b9b364c..6c050e27d6 100644 --- a/railties/guides/source/layouts_and_rendering.textile +++ b/railties/guides/source/layouts_and_rendering.textile @@ -671,19 +671,33 @@ There are three tag options available for the +auto_discovery_link_tag+: h5. Linking to JavaScript Files with the +javascript_include_tag+ -The +javascript_include_tag+ helper returns an HTML +script+ tag for each source provided. Rails looks in +public/javascripts+ for these files by default, but you can specify a full path relative to the document root, or a URL, if you prefer. For example, to include +public/javascripts/main.js+: +The +javascript_include_tag+ helper returns an HTML +script+ tag for each source provided. + +If you are using Rails with the "Asset Pipeline":http://guides.rubyonrails.org/asset_pipeline.html enabled, this helper will generate a link to +/assets/javascripts/+ rather than +public/javascripts+ which was used in earlier versions of Rails. This link is then served by the Sprockets gem, which was introduced in Rails 3.1. + +A JavaScript file within a Rails application or Rails engine goes in one of three locations: +app/assets+, +lib/assets+ or +vendor/assets+. These locations are explained in detail in the "Asset Organisation section in the Asset Pipeline Guide":http://guides.rubyonrails.org/asset_pipeline.html#asset-organization + +You can specify a full path relative to the document root, or a URL, if you prefer. For example, to link to a JavaScript file that is inside a directory called +javascripts+ inside of one of +app/assets+, +lib/assets+ or +vendor/assets+, you would do this: <erb> <%= javascript_include_tag "main" %> </erb> -To include +public/javascripts/main.js+ and +public/javascripts/columns.js+: +Rails will then output a +script+ tag such as this: + +<html> +<script src='/assets/main.js' type="text/javascript"></script> +</html> + +The request to this asset is then served by the Sprockets gem. + +To include multiple files such as +app/assets/javascripts/main.js+ and +app/assets/javascripts/columns.js+ at the same time: <erb> <%= javascript_include_tag "main", "columns" %> </erb> -To include +public/javascripts/main.js+ and +public/photos/columns.js+: +To include +app/assets/javascripts/main.js+ and +app/assets/javascripts/photos/columns.js+: <erb> <%= javascript_include_tag "main", "/photos/columns" %> @@ -701,15 +715,38 @@ If the application does not use the asset pipeline, the +:defaults+ option loads <%= javascript_include_tag :defaults %> </erb> -And you can in any case override the expansion in <tt>config/application.rb</tt>: +Outputting +script+ tags such as this: + +<html> +<script src="/javascripts/jquery.js" type="text/javascript"></script> +<script src="/javascripts/jquery_ujs.js" type="text/javascript"></script> +</html> + +These two files for jQuery, +jquery.js+ and +jquery_ujs.js+ must be placed inside +public/javascripts+ if the application doesn't use the asset pipeline. These files can be downloaded from the "jquery-rails repository on GitHub":https://github.com/indirect/jquery-rails/tree/master/vendor/assets/javascripts + +WARNING: If you are using the Asset Pipeline, this tag will render a +script+ tag for an asset called +defaults.js+, which would not exist in your application unless you've explicitly defined it to be. + +And you can in any case override the +:defaults+ expansion in <tt>config/application.rb</tt>: <ruby> config.action_view.javascript_expansions[:defaults] = %w(foo.js bar.js) </ruby> +You can also define new defaults: + +<ruby> +config.action_view.javascript_expansions[:projects] = %w(projects.js tickets.js) +</ruby> + +And use them by referencing them exactly like +:defaults+: + +<erb> +<%= javascript_include_tag :projects %> +</erb> + When using <tt>:defaults</tt>, if an <tt>application.js</tt> file exists in <tt>public/javascripts</tt> it will be included as well at then end. -Also, the +:all+ option loads every JavaScript file in +public/javascripts+: +Also, if the Asset Pipeline is disabled, the +:all+ expansion loads every JavaScript file in +public/javascripts+: <erb> <%= javascript_include_tag :all %> diff --git a/railties/guides/source/migrations.textile b/railties/guides/source/migrations.textile index c63f2aa119..e67be0ae9f 100644 --- a/railties/guides/source/migrations.textile +++ b/railties/guides/source/migrations.textile @@ -1,12 +1,24 @@ h2. Migrations -Migrations are a convenient way for you to alter your database in a structured and organized manner. You could edit fragments of SQL by hand but you would then be responsible for telling other developers that they need to go and run them. You'd also have to keep track of which changes need to be run against the production machines next time you deploy. - -Active Record tracks which migrations have already been run so all you have to do is update your source and run +rake db:migrate+. Active Record will work out which migrations should be run. It will also update your +db/schema.rb+ file to match the structure of your database. - -Migrations also allow you to describe these transformations using Ruby. The great thing about this is that (like most of Active Record's functionality) it is database independent: you don't need to worry about the precise syntax of +CREATE TABLE+ any more than you worry about variations on +SELECT *+ (you can drop down to raw SQL for database specific features). For example you could use SQLite3 in development, but MySQL in production. - -You'll learn all about migrations including: +Migrations are a convenient way for you to alter your database in a structured +and organized manner. You could edit fragments of SQL by hand but you would then +be responsible for telling other developers that they need to go and run them. +You'd also have to keep track of which changes need to be run against the +production machines next time you deploy. + +Active Record tracks which migrations have already been run so all you have to +do is update your source and run +rake db:migrate+. Active Record will work out +which migrations should be run. It will also update your +db/schema.rb+ file to +match the structure of your database. + +Migrations also allow you to describe these transformations using Ruby. The +great thing about this is that (like most of Active Record's functionality) it +is database independent: you don't need to worry about the precise syntax of ++CREATE TABLE+ any more than you worry about variations on +SELECT *+ (you can +drop down to raw SQL for database specific features). For example you could use +SQLite3 in development, but MySQL in production. + +In this guide, you'll learn all about migrations including: * The generators you can use to create them * The methods Active Record provides to manipulate your database @@ -17,7 +29,8 @@ endprologue. h3. Anatomy of a Migration -Before we dive into the details of a migration, here are a few examples of the sorts of things you can do: +Before we dive into the details of a migration, here are a few examples of the +sorts of things you can do: <ruby> class CreateProducts < ActiveRecord::Migration @@ -36,9 +49,15 @@ class CreateProducts < ActiveRecord::Migration end </ruby> -This migration adds a table called +products+ with a string column called +name+ and a text column called +description+. A primary key column called +id+ will also be added, however since this is the default we do not need to ask for this. The timestamp columns +created_at+ and +updated_at+ which Active Record populates automatically will also be added. Reversing this migration is as simple as dropping the table. +This migration adds a table called +products+ with a string column called +name+ +and a text column called +description+. A primary key column called +id+ will +also be added, however since this is the default we do not need to ask for this. +The timestamp columns +created_at+ and +updated_at+ which Active Record +populates automatically will also be added. Reversing this migration is as +simple as dropping the table. -Migrations are not limited to changing the schema. You can also use them to fix bad data in the database or populate new fields: +Migrations are not limited to changing the schema. You can also use them to fix +bad data in the database or populate new fields: <ruby> class AddReceiveNewsletterToUsers < ActiveRecord::Migration @@ -55,12 +74,18 @@ class AddReceiveNewsletterToUsers < ActiveRecord::Migration end </ruby> -NOTE: Some "caveats":#using-models-in-your-migrations apply to using models in your migrations. +NOTE: Some "caveats":#using-models-in-your-migrations apply to using models in +your migrations. -This migration adds a +receive_newsletter+ column to the +users+ table. We want it to default to +false+ for new users, but existing users are considered -to have already opted in, so we use the User model to set the flag to +true+ for existing users. +This migration adds a +receive_newsletter+ column to the +users+ table. We want +it to default to +false+ for new users, but existing users are considered to +have already opted in, so we use the User model to set the flag to +true+ for +existing users. -Rails 3.1 makes migrations smarter by providing a new <tt>change</tt> method. This method is preferred for writing constructive migrations (adding columns or tables). The migration knows how to migrate your database and reverse it when the migration is rolled back without the need to write a separate +down+ method. +Rails 3.1 makes migrations smarter by providing a new <tt>change</tt> method. +This method is preferred for writing constructive migrations (adding columns or +tables). The migration knows how to migrate your database and reverse it when +the migration is rolled back without the need to write a separate +down+ method. <ruby> class CreateProducts < ActiveRecord::Migration @@ -77,64 +102,111 @@ end h4. Migrations are Classes -A migration is a subclass of <tt>ActiveRecord::Migration</tt> that implements two methods: +up+ (perform the required transformations) and +down+ (revert them). +A migration is a subclass of <tt>ActiveRecord::Migration</tt> that implements +two methods: +up+ (perform the required transformations) and +down+ (revert +them). -Active Record provides methods that perform common data definition tasks in a database independent way (you'll read about them in detail later): +Active Record provides methods that perform common data definition tasks in a +database independent way (you'll read about them in detail later): -* +create_table+ -* +change_table+ -* +drop_table+ * +add_column+ +* +add_index+ * +change_column+ -* +rename_column+ +* +change_table+ +* +create_table+ +* +drop_table+ * +remove_column+ -* +add_index+ * +remove_index+ +* +rename_column+ -If you need to perform tasks specific to your database (for example create a "foreign key":#active-record-and-referential-integrity constraint) then the +execute+ method allows you to execute arbitrary SQL. A migration is just a regular Ruby class so you're not limited to these functions. For example after adding a column you could write code to set the value of that column for existing records (if necessary using your models). +If you need to perform tasks specific to your database (for example create a +"foreign key":#active-record-and-referential-integrity constraint) then the ++execute+ method allows you to execute arbitrary SQL. A migration is just a +regular Ruby class so you're not limited to these functions. For example after +adding a column you could write code to set the value of that column for +existing records (if necessary using your models). -On databases that support transactions with statements that change the schema (such as PostgreSQL or SQLite3), migrations are wrapped in a transaction. If the database does not support this (for example MySQL) then when a migration fails the parts of it that succeeded will not be rolled back. You will have to unpick the changes that were made by hand. +On databases that support transactions with statements that change the schema +(such as PostgreSQL or SQLite3), migrations are wrapped in a transaction. If the +database does not support this (for example MySQL) then when a migration fails +the parts of it that succeeded will not be rolled back. You will have to rollback +the changes that were made by hand. h4. What's in a Name -Migrations are stored in files in +db/migrate+, one for each migration class. The name of the file is of the form +YYYYMMDDHHMMSS_create_products.rb+, that is to say a UTC timestamp identifying the migration followed by an underscore followed by the name of the migration. The name of the migration class (CamelCased version) should match the latter part of the file name. For example +20080906120000_create_products.rb+ should define class +CreateProducts+ and +20080906120001_add_details_to_products.rb+ should define +AddDetailsToProducts+. If you do feel the need to change the file name then you <em>have to</em> update the name of the class inside or Rails will complain about a missing class. - -Internally Rails only uses the migration's number (the timestamp) to identify them. Prior to Rails 2.1 the migration number started at 1 and was incremented each time a migration was generated. With multiple developers it was easy for these to clash requiring you to rollback migrations and renumber them. With Rails 2.1 this is largely avoided by using the creation time of the migration to identify them. You can revert to the old numbering scheme by adding the following line to +config/application.rb+. +Migrations are stored as files in the +db/migrate+ directory, one for each +migration class. The name of the file is of the form ++YYYYMMDDHHMMSS_create_products.rb+, that is to say a UTC timestamp +identifying the migration followed by an underscore followed by the name +of the migration. The name of the migration class (CamelCased version) +should match the latter part of the file name. For example ++20080906120000_create_products.rb+ should define class +CreateProducts+ and ++20080906120001_add_details_to_products.rb+ should define ++AddDetailsToProducts+. If you do feel the need to change the file name then you +<em>have to</em> update the name of the class inside or Rails will complain +about a missing class. + +Internally Rails only uses the migration's number (the timestamp) to identify +them. Prior to Rails 2.1 the migration number started at 1 and was incremented +each time a migration was generated. With multiple developers it was easy for +these to clash requiring you to rollback migrations and renumber them. With +Rails 2.1+ this is largely avoided by using the creation time of the migration +to identify them. You can revert to the old numbering scheme by adding the +following line to +config/application.rb+. <ruby> config.active_record.timestamped_migrations = false </ruby> -The combination of timestamps and recording which migrations have been run allows Rails to handle common situations that occur with multiple developers. +The combination of timestamps and recording which migrations have been run +allows Rails to handle common situations that occur with multiple developers. -For example Alice adds migrations +20080906120000+ and +20080906123000+ and Bob adds +20080906124500+ and runs it. Alice finishes her changes and checks in her migrations and Bob pulls down the latest changes. Rails knows that it has not run Alice's two migrations so +rake db:migrate+ would run them (even though Bob's migration with a later timestamp has been run), and similarly migrating down would not run their +down+ methods. +For example Alice adds migrations +20080906120000+ and +20080906123000+ and Bob +adds +20080906124500+ and runs it. Alice finishes her changes and checks in her +migrations and Bob pulls down the latest changes. When Bob runs +rake db:migrate+, +Rails knows that it has not run Alice's two migrations so it executes the +up+ method for each migration. -Of course this is no substitution for communication within the team. For example, if Alice's migration removed a table that Bob's migration assumed to exist, then trouble would certainly strike. +Of course this is no substitution for communication within the team. For +example, if Alice's migration removed a table that Bob's migration assumed to +exist, then trouble would certainly strike. h4. Changing Migrations -Occasionally you will make a mistake when writing a migration. If you have already run the migration then you cannot just edit the migration and run the migration again: Rails thinks it has already run the migration and so will do nothing when you run +rake db:migrate+. You must rollback the migration (for example with +rake db:rollback+), edit your migration and then run +rake db:migrate+ to run the corrected version. +Occasionally you will make a mistake when writing a migration. If you have +already run the migration then you cannot just edit the migration and run the +migration again: Rails thinks it has already run the migration and so will do +nothing when you run +rake db:migrate+. You must rollback the migration (for +example with +rake db:rollback+), edit your migration and then run +rake db:migrate+ to run the corrected version. -In general editing existing migrations is not a good idea: you will be creating extra work for yourself and your co-workers and cause major headaches if the existing version of the migration has already been run on production machines. Instead, you should write a new migration that performs the changes you require. Editing a freshly generated migration that has not yet been committed to source control (or, more generally, which has not been propagated beyond your development machine) is relatively harmless. +In general editing existing migrations is not a good idea: you will be creating +extra work for yourself and your co-workers and cause major headaches if the +existing version of the migration has already been run on production machines. +Instead, you should write a new migration that performs the changes you require. +Editing a freshly generated migration that has not yet been committed to source +control (or, more generally, which has not been propagated beyond your +development machine) is relatively harmless. h4. Supported Types -Active Record supports the following types: +Active Record supports the following database column types: +* +:binary+ +* +:boolean+ +* +:date+ +* +:datetime+ +* +:decimal+ +* +:float+ +* +:integer+ * +:primary_key+ * +:string+ * +:text+ -* +:integer+ -* +:float+ -* +:decimal+ -* +:datetime+ -* +:timestamp+ * +:time+ -* +:date+ -* +:binary+ -* +:boolean+ +* +:timestamp+ -These will be mapped onto an appropriate underlying database type. For example, with MySQL the type +:string+ is mapped to +VARCHAR(255)+. You can create columns of types not supported by Active Record when using the non-sexy syntax, for example +These will be mapped onto an appropriate underlying database type. For example, +with MySQL the type +:string+ is mapped to +VARCHAR(255)+. You can create +columns of types not supported by Active Record when using the non-sexy syntax, +for example <ruby> create_table :products do |t| @@ -148,7 +220,10 @@ h3. Creating a Migration h4. Creating a Model -The model and scaffold generators will create migrations appropriate for adding a new model. This migration will already contain instructions for creating the relevant table. If you tell Rails what columns you want, then statements for adding these columns will also be created. For example, running +The model and scaffold generators will create migrations appropriate for adding +a new model. This migration will already contain instructions for creating the +relevant table. If you tell Rails what columns you want, then statements for +adding these columns will also be created. For example, running <shell> $ rails generate model Product name:string description:text @@ -169,12 +244,15 @@ class CreateProducts < ActiveRecord::Migration end </ruby> -You can append as many column name/type pairs as you want. By default +t.timestamps+ (which creates the +updated_at+ and +created_at+ columns that -are automatically populated by Active Record) will be added for you. +You can append as many column name/type pairs as you want. By default, the +generated migration will include +t.timestamps+ (which creates the ++updated_at+ and +created_at+ columns that are automatically populated +by Active Record). h4. Creating a Standalone Migration -If you are creating migrations for other purposes (for example to add a column to an existing table) then you can use the migration generator: +If you are creating migrations for other purposes (for example to add a column +to an existing table) then you can also use the migration generator: <shell> $ rails generate migration AddPartNumberToProducts @@ -189,7 +267,9 @@ class AddPartNumberToProducts < ActiveRecord::Migration end </ruby> -If the migration name is of the form "AddXXXToYYY" or "RemoveXXXFromYYY" and is followed by a list of column names and types then a migration containing the appropriate +add_column+ and +remove_column+ statements will be created. +If the migration name is of the form "AddXXXToYYY" or "RemoveXXXFromYYY" and is +followed by a list of column names and types then a migration containing the +appropriate +add_column+ and +remove_column+ statements will be created. <shell> $ rails generate migration AddPartNumberToProducts part_number:string @@ -242,17 +322,23 @@ class AddDetailsToProducts < ActiveRecord::Migration end </ruby> -As always, what has been generated for you is just a starting point. You can add or remove from it as you see fit. +As always, what has been generated for you is just a starting point. You can add +or remove from it as you see fit by editing the +db/migrate/YYYYMMDDHHMMSS_add_details_to_products.rb file. -NOTE: The generated migration file for destructive migrations will still be old-style using the +up+ and +down+ methods. This is because Rails doesn't know the original data types defined when you made the original changes. +NOTE: The generated migration file for destructive migrations will still be +old-style using the +up+ and +down+ methods. This is because Rails needs to know +the original data types defined when you made the original changes. h3. Writing a Migration -Once you have created your migration using one of the generators it's time to get to work! +Once you have created your migration using one of the generators it's time to +get to work! h4. Creating a Table -Migration method +create_table+ will be one of your workhorses. A typical use would be +Migration method +create_table+ will be one of your workhorses. A typical use +would be <ruby> create_table :products do |t| @@ -260,9 +346,11 @@ create_table :products do |t| end </ruby> -which creates a +products+ table with a column called +name+ (and as discussed below, an implicit +id+ column). +which creates a +products+ table with a column called +name+ (and as discussed +below, an implicit +id+ column). -The object yielded to the block allows you to create columns on the table. There are two ways of doing it. The first (traditional) form looks like +The object yielded to the block allows you to create columns on the table. There +are two ways of doing it. The first (traditional) form looks like <ruby> create_table :products do |t| @@ -270,7 +358,9 @@ create_table :products do |t| end </ruby> -The second form, the so called "sexy" migration, drops the somewhat redundant +column+ method. Instead, the +string+, +integer+, etc. methods create a column of that type. Subsequent parameters are the same. +The second form, the so called "sexy" migration, drops the somewhat redundant ++column+ method. Instead, the +string+, +integer+, etc. methods create a column +of that type. Subsequent parameters are the same. <ruby> create_table :products do |t| @@ -278,7 +368,12 @@ create_table :products do |t| end </ruby> -By default, +create_table+ will create a primary key called +id+. You can change the name of the primary key with the +:primary_key+ option (don't forget to update the corresponding model) or, if you don't want a primary key at all (for example for a HABTM join table), you can pass the option +:id => false+. If you need to pass database specific options you can place an SQL fragment in the +:options+ option. For example, +By default, +create_table+ will create a primary key called +id+. You can change +the name of the primary key with the +:primary_key+ option (don't forget to +update the corresponding model) or, if you don't want a primary key at all (for +example for a HABTM join table), you can pass the option +:id => false+. If you +need to pass database specific options you can place an SQL fragment in the ++:options+ option. For example, <ruby> create_table :products, :options => "ENGINE=BLACKHOLE" do |t| @@ -286,11 +381,14 @@ create_table :products, :options => "ENGINE=BLACKHOLE" do |t| end </ruby> -will append +ENGINE=BLACKHOLE+ to the SQL statement used to create the table (when using MySQL, the default is +ENGINE=InnoDB+). +will append +ENGINE=BLACKHOLE+ to the SQL statement used to create the table +(when using MySQL, the default is +ENGINE=InnoDB+). h4. Changing Tables -A close cousin of +create_table+ is +change_table+, used for changing existing tables. It is used in a similar fashion to +create_table+ but the object yielded to the block knows more tricks. For example +A close cousin of +create_table+ is +change_table+, used for changing existing +tables. It is used in a similar fashion to +create_table+ but the object yielded +to the block knows more tricks. For example <ruby> change_table :products do |t| @@ -301,28 +399,23 @@ change_table :products do |t| end </ruby> -removes the +description+ and +name+ columns, creates a +part_number+ column and adds an index on it. Finally it renames the +upccode+ column. This is the same as doing - -<ruby> -remove_column :products, :description -remove_column :products, :name -add_column :products, :part_number, :string -add_index :products, :part_number -rename_column :products, :upccode, :upc_code -</ruby> - -You don't have to keep repeating the table name and it groups all the statements related to modifying one particular table. The individual transformation names are also shorter, for example +remove_column+ becomes just +remove+ and +add_index+ becomes just +index+. +removes the +description+ and +name+ columns, creates a +part_number+ string +column and adds an index on it. Finally it renames the +upccode+ column. h4. Special Helpers -Active Record provides some shortcuts for common functionality. It is for example very common to add both the +created_at+ and +updated_at+ columns and so there is a method that does exactly that: +Active Record provides some shortcuts for common functionality. It is for +example very common to add both the +created_at+ and +updated_at+ columns and so +there is a method that does exactly that: <ruby> create_table :products do |t| t.timestamps end </ruby> -will create a new products table with those two columns (plus the +id+ column) whereas + +will create a new products table with those two columns (plus the +id+ column) +whereas <ruby> change_table :products do |t| @@ -331,7 +424,8 @@ end </ruby> adds those columns to an existing table. -The other helper is called +references+ (also available as +belongs_to+). In its simplest form it just adds some readability +Another helper is called +references+ (also available as +belongs_to+). In its +simplest form it just adds some readability. <ruby> create_table :products do |t| @@ -339,24 +433,42 @@ create_table :products do |t| end </ruby> -will create a +category_id+ column of the appropriate type. Note that you pass the model name, not the column name. Active Record adds the +_id+ for you. If you have polymorphic +belongs_to+ associations then +references+ will add both of the columns required: +will create a +category_id+ column of the appropriate type. Note that you pass +the model name, not the column name. Active Record adds the +_id+ for you. If +you have polymorphic +belongs_to+ associations then +references+ will add both +of the columns required: <ruby> create_table :products do |t| t.references :attachment, :polymorphic => {:default => 'Photo'} end </ruby> -will add an +attachment_id+ column and a string +attachment_type+ column with a default value of 'Photo'. -NOTE: The +references+ helper does not actually create foreign key constraints for you. You will need to use +execute+ or a plugin that adds "foreign key support":#active-record-and-referential-integrity. +will add an +attachment_id+ column and a string +attachment_type+ column with +a default value of 'Photo'. + +NOTE: The +references+ helper does not actually create foreign key constraints +for you. You will need to use +execute+ or a plugin that adds "foreign key +support":#active-record-and-referential-integrity. -If the helpers provided by Active Record aren't enough you can use the +execute+ method to execute arbitrary SQL. +If the helpers provided by Active Record aren't enough you can use the +execute+ +method to execute arbitrary SQL. -For more details and examples of individual methods, check the API documentation, in particular the documentation for "<tt>ActiveRecord::ConnectionAdapters::SchemaStatements</tt>":http://api.rubyonrails.org/classes/ActiveRecord/ConnectionAdapters/SchemaStatements.html (which provides the methods available in the +up+ and +down+ methods), "<tt>ActiveRecord::ConnectionAdapters::TableDefinition</tt>":http://api.rubyonrails.org/classes/ActiveRecord/ConnectionAdapters/TableDefinition.html (which provides the methods available on the object yielded by +create_table+) and "<tt>ActiveRecord::ConnectionAdapters::Table</tt>":http://api.rubyonrails.org/classes/ActiveRecord/ConnectionAdapters/Table.html (which provides the methods available on the object yielded by +change_table+). +For more details and examples of individual methods, check the API documentation, +in particular the documentation for +"<tt>ActiveRecord::ConnectionAdapters::SchemaStatements</tt>":http://api.rubyonrails.org/classes/ActiveRecord/ConnectionAdapters/SchemaStatements.html +(which provides the methods available in the +up+ and +down+ methods), +"<tt>ActiveRecord::ConnectionAdapters::TableDefinition</tt>":http://api.rubyonrails.org/classes/ActiveRecord/ConnectionAdapters/TableDefinition.html +(which provides the methods available on the object yielded by +create_table+) +and +"<tt>ActiveRecord::ConnectionAdapters::Table</tt>":http://api.rubyonrails.org/classes/ActiveRecord/ConnectionAdapters/Table.html +(which provides the methods available on the object yielded by +change_table+). -h4. Writing Your +change+ Method +h4. Using the +change+ Method -The +change+ method removes the need to write both +up+ and +down+ methods in those cases that Rails know how to revert the changes automatically. Currently, the +change+ method supports only these migration definitions: +The +change+ method removes the need to write both +up+ and +down+ methods in +those cases that Rails know how to revert the changes automatically. Currently, +the +change+ method supports only these migration definitions: * +add_column+ * +add_index+ @@ -367,15 +479,20 @@ The +change+ method removes the need to write both +up+ and +down+ methods in th * +rename_index+ * +rename_table+ -If you're going to use other methods, you'll have to write the +up+ and +down+ methods normally. +If you're going to need to use any other methods, you'll have to write the ++up+ and +down+ methods instead of using the +change+ method. -h4. Writing Your +down+ Method +h4. Using the +up+/+down+ Methods -The +down+ method of your migration should revert the transformations done by the +up+ method. In other words, the database schema should be unchanged if you do an +up+ followed by a +down+. For example, if you create a table in the +up+ method, you should drop it in the +down+ method. It is wise to reverse the transformations in precisely the reverse order they were made in the +up+ method. For example, +The +down+ method of your migration should revert the transformations done by +the +up+ method. In other words, the database schema should be unchanged if you +do an +up+ followed by a +down+. For example, if you create a table in the +up+ +method, you should drop it in the +down+ method. It is wise to reverse the +transformations in precisely the reverse order they were made in the +up+ +method. For example, <ruby> class ExampleMigration < ActiveRecord::Migration - def up create_table :products do |t| t.references :category @@ -387,47 +504,69 @@ class ExampleMigration < ActiveRecord::Migration FOREIGN KEY (category_id) REFERENCES categories(id) SQL - add_column :users, :home_page_url, :string - rename_column :users, :email, :email_address end def down rename_column :users, :email_address, :email remove_column :users, :home_page_url - execute "ALTER TABLE products DROP FOREIGN KEY fk_products_categories" + execute <<-SQL + ALTER TABLE products + DROP FOREIGN KEY fk_products_categories + SQL drop_table :products end end </ruby> -Sometimes your migration will do something which is just plain irreversible; for example, it might destroy some data. In such cases, you can raise +ActiveRecord::IrreversibleMigration+ from your +down+ method. If someone tries to revert your migration, an error message will be displayed saying that it can't be done. +Sometimes your migration will do something which is just plain irreversible; for +example, it might destroy some data. In such cases, you can raise ++ActiveRecord::IrreversibleMigration+ from your +down+ method. If someone tries +to revert your migration, an error message will be displayed saying that it +can't be done. h3. Running Migrations -Rails provides a set of rake tasks to work with migrations which boil down to running certain sets of migrations. The very first migration related rake task you will use will probably be +db:migrate+. In its most basic form it just runs the +up+ method for all the migrations that have not yet been run. If there are no such migrations, it exits. +Rails provides a set of rake tasks to work with migrations which boil down to +running certain sets of migrations. + +The very first migration related rake task you will use will probably be ++rake db:migrate+. In its most basic form it just runs the +up+ or +change+ +method for all the migrations that have not yet been run. If there are +no such migrations, it exits. It will run these migrations in order based +on the date of the migration. -Note that running the +db:migrate+ also invokes the +db:schema:dump+ task, which will update your db/schema.rb file to match the structure of your database. +Note that running the +db:migrate+ also invokes the +db:schema:dump+ task, which +will update your db/schema.rb file to match the structure of your database. -If you specify a target version, Active Record will run the required migrations (up or down) until it has reached the specified version. The -version is the numerical prefix on the migration's filename. For example, to migrate to version 20080906120000 run +If you specify a target version, Active Record will run the required migrations +(up or down or change) until it has reached the specified version. The version +is the numerical prefix on the migration's filename. For example, to migrate +to version 20080906120000 run <shell> $ rake db:migrate VERSION=20080906120000 </shell> -If version 20080906120000 is greater than the current version (i.e., it is migrating upwards), this will run the +up+ method on all migrations up to and including 20080906120000. If migrating downwards, this will run the +down+ method on all the migrations down to, but not including, 20080906120000. +If version 20080906120000 is greater than the current version (i.e., it is +migrating upwards), this will run the +up+ method on all migrations up to and +including 20080906120000, and will not execute any later migrations. If +migrating downwards, this will run the +down+ method on all the migrations +down to, but not including, 20080906120000. h4. Rolling Back -A common task is to rollback the last migration, for example if you made a mistake in it and wish to correct it. Rather than tracking down the version number associated with the previous migration you can run +A common task is to rollback the last migration, for example if you made a +mistake in it and wish to correct it. Rather than tracking down the version +number associated with the previous migration you can run <shell> $ rake db:rollback </shell> -This will run the +down+ method from the latest migration. If you need to undo several migrations you can provide a +STEP+ parameter: +This will run the +down+ method from the latest migration. If you need to undo +several migrations you can provide a +STEP+ parameter: <shell> $ rake db:rollback STEP=3 @@ -435,46 +574,65 @@ $ rake db:rollback STEP=3 will run the +down+ method from the last 3 migrations. -The +db:migrate:redo+ task is a shortcut for doing a rollback and then migrating back up again. As with the +db:rollback+ task, you can use the +STEP+ parameter if you need to go more than one version back, for example +The +db:migrate:redo+ task is a shortcut for doing a rollback and then migrating +back up again. As with the +db:rollback+ task, you can use the +STEP+ parameter +if you need to go more than one version back, for example <shell> $ rake db:migrate:redo STEP=3 </shell> -Neither of these Rake tasks do anything you could not do with +db:migrate+. They are simply more convenient, since you do not need to explicitly specify the version to migrate to. +Neither of these Rake tasks do anything you could not do with +db:migrate+. They +are simply more convenient, since you do not need to explicitly specify the +version to migrate to. -Lastly, the +db:reset+ task will drop the database, recreate it and load the current schema into it. +h4. Resetting the database -NOTE: This is not the same as running all the migrations - see the section on "schema.rb":#schema-dumping-and-you. +The +rake db:reset+ task will drop the database, recreate it and load the +current schema into it. -h4. Being Specific +NOTE: This is not the same as running all the migrations - see the section on +"schema.rb":#schema-dumping-and-you. -If you need to run a specific migration up or down, the +db:migrate:up+ and +db:migrate:down+ tasks will do that. Just specify the appropriate version and the corresponding migration will have its +up+ or +down+ method invoked, for example, +h4. Running specific migrations + +If you need to run a specific migration up or down, the +db:migrate:up+ and ++db:migrate:down+ tasks will do that. Just specify the appropriate version and +the corresponding migration will have its +up+ or +down+ method invoked, for +example, <shell> $ rake db:migrate:up VERSION=20080906120000 </shell> -will run the +up+ method from the 20080906120000 migration. These tasks check whether the migration has already run, so for example +db:migrate:up VERSION=20080906120000+ will do nothing if Active Record believes that 20080906120000 has already been run. +will run the +up+ method from the 20080906120000 migration. These tasks still +check whether the migration has already run, so for example +db:migrate:up +VERSION=20080906120000+ will do nothing if Active Record believes that +20080906120000 has already been run. -h4. Being Talkative +h4. Changing the output of running migrations -By default migrations tell you exactly what they're doing and how long it took. A migration creating a table and adding an index might produce output like this +By default migrations tell you exactly what they're doing and how long it took. +A migration creating a table and adding an index might produce output like this <shell> -20080906170109 CreateProducts: migrating +== CreateProducts: migrating ================================================= -- create_table(:products) - -> 0.0021s --- add_index(:products, :name) - -> 0.0026s -20080906170109 CreateProducts: migrated (0.0059s) + -> 0.0028s +== CreateProducts: migrated (0.0028s) ======================================== </shell> -Several methods are provided that allow you to control all this: +Several methods are provided in migrations that allow you to control all this: -* +suppress_messages+ takes a block as an argument and suppresses any output generated by the block. -* +say+ takes a message argument and outputs it as is. A second boolean argument can be passed to specify whether to indent or not. -* +say_with_time+ outputs text along with how long it took to run its block. If the block returns an integer it assumes it is the number of rows affected. +|_.Method |_.Purpose| +|suppress_messages |Takes a block as an argument and suppresses any output + generated by the block.| +|say |Takes a message argument and outputs it as is. A second + boolean argument can be passed to specify whether to + indent or not.| +|say_with_time |Outputs text along with how long it took to run its + block. If the block returns an integer it assumes it + is the number of rows affected.| For example, this migration @@ -502,37 +660,46 @@ end generates the following output <shell> -20080906170109 CreateProducts: migrating - Created a table +== CreateProducts: migrating ================================================= +-- Created a table -> and an index! - Waiting for a while - -> 10.0001s +-- Waiting for a while + -> 10.0013s -> 250 rows -20080906170109 CreateProducts: migrated (10.0097s) +== CreateProducts: migrated (10.0054s) ======================================= </shell> -If you just want Active Record to shut up, then running +rake db:migrate VERBOSE=false+ will suppress all output. +If you want Active Record to not output anything, then running +rake db:migrate +VERBOSE=false+ will suppress all output. h3. Using Models in Your Migrations -When creating or updating data in a migration it is often tempting to use one of your models. After all, they exist to provide easy access to the underlying data. This can be done, but some caution should be observed. +When creating or updating data in a migration it is often tempting to use one of +your models. After all, they exist to provide easy access to the underlying +data. This can be done, but some caution should be observed. -For example, problems occur when the model uses database columns which are (1) not currently in the database and (2) will be created by this or a subsequent migration. +For example, problems occur when the model uses database columns which are (1) +not currently in the database and (2) will be created by this or a subsequent +migration. -Consider this example, where Alice and Bob are working on the same code base which contains a +Product+ model: +Consider this example, where Alice and Bob are working on the same code base +which contains a +Product+ model: Bob goes on vacation. -Alice creates a migration for the +products+ table which adds a new column and initializes it. -She also adds a validation to the +Product+ model for the new column. +Alice creates a migration for the +products+ table which adds a new column and +initializes it. She also adds a validation to the +Product+ model for the new +column. <ruby> # db/migrate/20100513121110_add_flag_to_product.rb class AddFlagToProduct < ActiveRecord::Migration def change - add_column :products, :flag, :int - Product.all.each { |f| f.update_attributes!(:flag => 'false') } + add_column :products, :flag, :boolean + Product.all.each do |product| + product.update_attributes!(:flag => 'false') + end end end </ruby> @@ -545,7 +712,9 @@ class Product < ActiveRecord::Base end </ruby> -Alice adds a second migration which adds and initializes another column to the +products+ table and also adds a validation to the +Product+ model for the new column. +Alice adds a second migration which adds and initializes another column to the ++products+ table and also adds a validation to the +Product+ model for the new +column. <ruby> # db/migrate/20100515121110_add_fuzz_to_product.rb @@ -553,7 +722,9 @@ Alice adds a second migration which adds and initializes another column to the + class AddFuzzToProduct < ActiveRecord::Migration def change add_column :products, :fuzz, :string - Product.all.each { |f| f.update_attributes! :fuzz => 'fuzzy' } + Product.all.each do |product| + product.update_attributes! :fuzz => 'fuzzy' + end end end </ruby> @@ -570,10 +741,14 @@ Both migrations work for Alice. Bob comes back from vacation and: -# updates the source - which contains both migrations and the latests version of the Product model. -# runs outstanding migrations with +rake db:migrate+, which includes the one that updates the +Product+ model. +# Updates the source - which contains both migrations and the latests version of +the Product model. +# Runs outstanding migrations with +rake db:migrate+, which +includes the one that updates the +Product+ model. -The migration crashes because when the model attempts to save, it tries to validate the second added column, which is not in the database when the _first_ migration runs: +The migration crashes because when the model attempts to save, it tries to +validate the second added column, which is not in the database when the _first_ +migration runs: <plain> rake aborted! @@ -582,9 +757,12 @@ An error has occurred, this and all later migrations canceled: undefined method `fuzz' for #<Product:0x000001049b14a0> </plain> -A fix for this is to create a local model within the migration. This keeps rails from running the validations, so that the migrations run to completion. +A fix for this is to create a local model within the migration. This keeps rails +from running the validations, so that the migrations run to completion. -When using a faux model, it's a good idea to call +Product.reset_column_information+ to refresh the +ActiveRecord+ cache for the +Product+ model prior to updating data in the database. +When using a faux model, it's a good idea to call ++Product.reset_column_information+ to refresh the +ActiveRecord+ cache for the ++Product+ model prior to updating data in the database. If Alice had done this instead, there would have been no problem: @@ -596,9 +774,11 @@ class AddFlagToProduct < ActiveRecord::Migration end def change - add_column :products, :flag, :int + add_column :products, :flag, :integer Product.reset_column_information - Product.all.each { |f| f.update_attributes!(:flag => false) } + Product.all.each do |product| + product.update_attributes!(:flag => false) + end end end </ruby> @@ -609,32 +789,50 @@ end class AddFuzzToProduct < ActiveRecord::Migration class Product < ActiveRecord::Base end + def change add_column :products, :fuzz, :string Product.reset_column_information - Product.all.each { |f| f.update_attributes! :fuzz => 'fuzzy' } + Product.all.each do |product| + product.update_attributes!(:fuzz => 'fuzzy') + end end end </ruby> - h3. Schema Dumping and You h4. What are Schema Files for? -Migrations, mighty as they may be, are not the authoritative source for your database schema. That role falls to either +db/schema.rb+ or an SQL file which Active Record generates by examining the database. They are not designed to be edited, they just represent the current state of the database. +Migrations, mighty as they may be, are not the authoritative source for your +database schema. That role falls to either +db/schema.rb+ or an SQL file which +Active Record generates by examining the database. They are not designed to be +edited, they just represent the current state of the database. -There is no need (and it is error prone) to deploy a new instance of an app by replaying the entire migration history. It is much simpler and faster to just load into the database a description of the current schema. +There is no need (and it is error prone) to deploy a new instance of an app by +replaying the entire migration history. It is much simpler and faster to just +load into the database a description of the current schema. -For example, this is how the test database is created: the current development database is dumped (either to +db/schema.rb+ or +db/development.sql+) and then loaded into the test database. +For example, this is how the test database is created: the current development +database is dumped (either to +db/schema.rb+ or +db/development.sql+) and then +loaded into the test database. -Schema files are also useful if you want a quick look at what attributes an Active Record object has. This information is not in the model's code and is frequently spread across several migrations, but is summed up in the schema file. The "annotate_models":https://github.com/ctran/annotate_models gem automatically adds and updates comments at the top of each model summarizing the schema if you desire that functionality. +Schema files are also useful if you want a quick look at what attributes an +Active Record object has. This information is not in the model's code and is +frequently spread across several migrations, but the information is nicely +summed up in the schema file. The +"annotate_models":https://github.com/ctran/annotate_models gem automatically +adds and updates comments at the top of each model summarizing the schema if +you desire that functionality. h4. Types of Schema Dumps -There are two ways to dump the schema. This is set in +config/application.rb+ by the +config.active_record.schema_format+ setting, which may be either +:sql+ or +:ruby+. +There are two ways to dump the schema. This is set in +config/application.rb+ by +the +config.active_record.schema_format+ setting, which may be either +:sql+ or ++:ruby+. -If +:ruby+ is selected then the schema is stored in +db/schema.rb+. If you look at this file you'll find that it looks an awful lot like one very big migration: +If +:ruby+ is selected then the schema is stored in +db/schema.rb+. If you look +at this file you'll find that it looks an awful lot like one very big migration: <ruby> ActiveRecord::Schema.define(:version => 20080906171750) do @@ -646,28 +844,57 @@ ActiveRecord::Schema.define(:version => 20080906171750) do create_table "products", :force => true do |t| t.string "name" - t.text "description" + t.text "description" t.datetime "created_at" t.datetime "updated_at" - t.string "part_number" + t.string "part_number" end end </ruby> -In many ways this is exactly what it is. This file is created by inspecting the database and expressing its structure using +create_table+, +add_index+, and so on. Because this is database-independent, it could be loaded into any database that Active Record supports. This could be very useful if you were to distribute an application that is able to run against multiple databases. - -There is however a trade-off: +db/schema.rb+ cannot express database specific items such as foreign key constraints, triggers, or stored procedures. While in a migration you can execute custom SQL statements, the schema dumper cannot reconstitute those statements from the database. If you are using features like this, then you should set the schema format to +:sql+. - -Instead of using Active Record's schema dumper, the database's structure will be dumped using a tool specific to the database (via the +db:structure:dump+ Rake task) into +db/structure.sql+. For example, for the PostgreSQL RDBMS, the +pg_dump+ utility is used. For MySQL, this file will contain the output of +SHOW CREATE TABLE+ for the various tables. Loading these schemas is simply a question of executing the SQL statements they contain. By definition, this will create a perfect copy of the database's structure. Using the +:sql+ schema format will, however, prevent loading the schema into a RDBMS other than the one used to create it. +In many ways this is exactly what it is. This file is created by inspecting the +database and expressing its structure using +create_table+, +add_index+, and so +on. Because this is database-independent, it could be loaded into any database +that Active Record supports. This could be very useful if you were to distribute +an application that is able to run against multiple databases. + +There is however a trade-off: +db/schema.rb+ cannot express database specific +items such as foreign key constraints, triggers, or stored procedures. While in +a migration you can execute custom SQL statements, the schema dumper cannot +reconstitute those statements from the database. If you are using features like +this, then you should set the schema format to +:sql+. + +Instead of using Active Record's schema dumper, the database's structure will be +dumped using a tool specific to the database (via the +db:structure:dump+ Rake task) +into +db/structure.sql+. For example, for the PostgreSQL RDBMS, the ++pg_dump+ utility is used. For MySQL, this file will contain the output of +SHOW +CREATE TABLE+ for the various tables. Loading these schemas is simply a question +of executing the SQL statements they contain. By definition, this will create a +perfect copy of the database's structure. Using the +:sql+ schema format will, +however, prevent loading the schema into a RDBMS other than the one used to +create it. h4. Schema Dumps and Source Control -Because schema dumps are the authoritative source for your database schema, it is strongly recommended that you check them into source control. +Because schema dumps are the authoritative source for your database schema, it +is strongly recommended that you check them into source control. h3. Active Record and Referential Integrity -The Active Record way claims that intelligence belongs in your models, not in the database. As such, features such as triggers or foreign key constraints, which push some of that intelligence back into the database, are not heavily used. - -Validations such as +validates :foreign_key, :uniqueness => true+ are one way in which models can enforce data integrity. The +:dependent+ option on associations allows models to automatically destroy child objects when the parent is destroyed. Like anything which operates at the application level, these cannot guarantee referential integrity and so some people augment them with foreign key constraints. - -Although Active Record does not provide any tools for working directly with such features, the +execute+ method can be used to execute arbitrary SQL. You could also use some plugin like "foreigner":https://github.com/matthuhiggins/foreigner which add foreign key support to Active Record (including support for dumping foreign keys in +db/schema.rb+). +The Active Record way claims that intelligence belongs in your models, not in +the database. As such, features such as triggers or foreign key constraints, +which push some of that intelligence back into the database, are not heavily +used. + +Validations such as +validates :foreign_key, :uniqueness => true+ are one way in +which models can enforce data integrity. The +:dependent+ option on associations +allows models to automatically destroy child objects when the parent is +destroyed. Like anything which operates at the application level, these cannot +guarantee referential integrity and so some people augment them with foreign key +constraints in the database. + +Although Active Record does not provide any tools for working directly with such +features, the +execute+ method can be used to execute arbitrary SQL. You could +also use some plugin like "foreigner":https://github.com/matthuhiggins/foreigner +which add foreign key support to Active Record (including support for dumping +foreign keys in +db/schema.rb+). diff --git a/railties/test/generators/app_generator_test.rb b/railties/test/generators/app_generator_test.rb index 41bb4d8b20..baa80419a6 100644 --- a/railties/test/generators/app_generator_test.rb +++ b/railties/test/generators/app_generator_test.rb @@ -329,8 +329,8 @@ class AppGeneratorTest < Rails::Generators::TestCase def test_generated_environments_file_for_sanitizer run_generator [destination_root, "--skip-active-record"] - ["config/environments/development.rb", "config/environments/test.rb"].each do |env_file| - assert_file env_file do |file| + %w(development test).each do |env| + assert_file "config/environments/#{env}.rb" do |file| assert_no_match(/config.active_record.mass_assignment_sanitizer = :strict/, file) end end @@ -338,7 +338,7 @@ class AppGeneratorTest < Rails::Generators::TestCase def test_generated_environments_file_for_auto_explain run_generator [destination_root, "--skip-active-record"] - %w(development test production).each do |env| + %w(development production).each do |env| assert_file "config/environments/#{env}.rb" do |file| assert_no_match %r(auto_explain_threshold_in_seconds), file end |