diff options
Diffstat (limited to 'railties/lib/rails/engine.rb')
-rw-r--r-- | railties/lib/rails/engine.rb | 217 |
1 files changed, 137 insertions, 80 deletions
diff --git a/railties/lib/rails/engine.rb b/railties/lib/rails/engine.rb index 0620b8608e..e9ce9610b8 100644 --- a/railties/lib/rails/engine.rb +++ b/railties/lib/rails/engine.rb @@ -17,7 +17,7 @@ module Rails # In Rails versions before to 3.0, your gems automatically behaved as Engine, however # this coupled Rails to Rubygems. Since Rails 3.0, if you want a gem to automatically # behave as Engine, you have to specify an Engine for it somewhere inside your plugin - # lib folder (similar with how we spceify a Railtie): + # lib folder (similar to how we specify a Railtie): # # # lib/my_engine.rb # module MyEngine @@ -47,6 +47,26 @@ module Rails # end # end # + # == Generators + # + # You can set up generators for engine with config.generators method: + # + # class MyEngine < Rails::Engine + # config.generators do |g| + # g.orm :active_record + # g.template_engine :erb + # g.test_framework :test_unit + # end + # end + # + # You can also set generators for application by using config.app_generators: + # + # class MyEngine < Rails::Engine + # # note that you can also pass block to app_generators in the same way you + # # can pass it to generators method + # config.app_generators.orm :datamapper + # end + # # == Paths # # Since Rails 3.0, both your Application and Engines do not have hardcoded paths. @@ -57,30 +77,30 @@ module Rails # you need to do is: # # class MyEngine < Rails::Engine - # paths.app.controllers = "lib/controllers" + # paths["app/controllers"] = "lib/controllers" # end # # You can also have your controllers being loaded from both "app/controllers" and # "lib/controllers": # # class MyEngine < Rails::Engine - # paths.app.controllers << "lib/controllers" + # paths["app/controllers"] << "lib/controllers" # end # # The available paths in an Engine are: # # class MyEngine < Rails::Engine - # paths.app = "app" - # paths.app.controllers = "app/controllers" - # paths.app.helpers = "app/helpers" - # paths.app.models = "app/models" - # paths.app.views = "app/views" - # paths.lib = "lib" - # paths.lib.tasks = "lib/tasks" - # paths.config = "config" - # paths.config.initializers = "config/initializers" - # paths.config.locales = "config/locales" - # paths.config.routes = "config/routes.rb" + # paths["app"] #=> ["app"] + # paths["app/controllers"] #=> ["app/controllers"] + # paths["app/helpers"] #=> ["app/helpers"] + # paths["app/models"] #=> ["app/models"] + # paths["app/views"] #=> ["app/views"] + # paths["lib"] #=> ["lib"] + # paths["lib/tasks"] #=> ["lib/tasks"] + # paths["config"] #=> ["config"] + # paths["config/initializers"] #=> ["config/initializers"] + # paths["config/locales"] #=> ["config/locales"] + # paths["config/routes"] #=> ["config/routes.rb"] # end # # Your Application class adds a couple more paths to this set. And as in your Application, @@ -165,19 +185,21 @@ module Rails # == Serving static files # # By default, rails use ActionDispatch::Static to serve static files in development mode. This is ok - # while you develop your application, but when you want to deploy it, assets from engine will not be served. + # while you develop your application, but when you want to deploy it, assets from engine will not be + # served by default. You should choose one of the two following strategies: # - # You can fix it in one of two ways: # * enable serving static files by setting config.serve_static_assets to true # * symlink engines' public directories in application's public directory by running - # `rake railties:create_symlinks` + # `rake ENGINE_NAME:install:assets`, where ENGINE_NAME is usually my_engine for the + # examples above # # == Engine name # # There are some places where engine's name is used. + # # * routes: when you mount engine with mount(MyEngine::Engine => '/my_engine'), it's used as default :as option - # * migrations: when you copy engine's migrations, they will be decorated with suffix based on engine_name, for example: - # 2010010203121314_create_users.my_engine.rb + # + # * rake tasks: engines have a few rake tasks. They are usually under my_engine namespace. # # Engine name is set by default based on class name. For MyEngine::Engine it will be my_engine_engine. # You can change it manually it manually using engine_name method: @@ -190,15 +212,17 @@ module Rails # # == Namespaced Engine # - # Normally, when you create controllers, helpers and models inside engine, they are treated - # as they would be created inside application. One of the cosequences of that is including - # application's helpers and url_helpers inside controller. Sometimes, especially when your - # engine provides its own routes, you don't want that. To isolate engine's stuff from application - # you can use namespace method: + # Normally when you create controllers, helpers and models inside engine, they are treated + # as they were created inside the application. This means all applications helpers and named routes + # will be available to your engine controllers. + # + # However, sometimes you want to isolate your engine from the application, specially if your engine + # have its own router. To do that, you simply need to call +isolate_namespace+. This method requires + # you to pass a module where all your controllers, helpers and models should be nested to: # # module MyEngine # class Engine < Rails::Engine - # namespace MyEngine + # isolate_namespace MyEngine # end # end # @@ -215,15 +239,21 @@ module Rails # url_helpers from MyEngine::Engine.routes. # # The next thing that changes in isolated engine is routes behaviour. Normally, when you namespace - # your controllers, you need to use scope or namespace method in routes. With isolated engine, - # the namespace is applied by default, so you can ignore it in routes. Further more, you don't need - # to use longer url helpers like "my_engine_articles_path". As the prefix is not set you can just use - # articles_path as you would normally do. + # your controllers, you also need to do namespace all your routes. With isolated engine, + # the namespace is applied by default, so you can ignore it in routes: + # + # MyEngine::Engine.routes.draw do + # resources :articles + # end + # + # The routes above will automatically point to MyEngine::ApplicationContoller. Further more, you don't + # need to use longer url helpers like "my_engine_articles_path". Instead, you shuold simply use + # articles_path as you would do with your application. # # To make that behaviour consistent with other parts of framework, isolated engine has influence also on # ActiveModel::Naming. When you use namespaced model, like MyEngine::Article, it will normally - # use the prefix "my_engine". In isolated engine, the prefix will be ommited in most of the places, - # like url helpers or form fields. + # use the prefix "my_engine". In isolated engine, the prefix will be ommited in url helpers and + # form fields for convenience. # # polymorphic_url(MyEngine::Article.new) #=> "articles_path" # @@ -231,16 +261,15 @@ module Rails # text_field :title #=> <input type="text" name="article[title]" id="article_title" /> # end # - # - # Additionaly namespaced engine will set its name according to namespace, so in that case: - # MyEngine::Engine.engine_name #=> "my_engine" and it will set MyEngine.table_name_prefix - # to "my_engine_". + # Additionaly isolated engine will set its name according to namespace, so + # MyEngine::Engine.engine_name #=> "my_engine". It will also set MyEngine.table_name_prefix + # to "my_engine_", changing MyEngine::Article model to use my_engine_article table. # # == Using Engine's routes outside Engine # - # Since you can mount engine inside application's routes now, you do not have direct access to engine's - # url_helpers inside application. When you mount Engine in application's routes special helper is - # created to allow doing that. Consider such scenario: + # Since now you can mount engine inside application's routes, you do not have direct access to engine's + # url_helpers inside application. When you mount Engine in application's routes, a special helper is + # created to allow you to do that. Consider such scenario: # # # APP/config/routes.rb # MyApplication::Application.routes.draw do @@ -248,7 +277,7 @@ module Rails # match "/foo" => "foo#index" # end # - # Now, you can use my_engine helper: + # Now, you can use my_engine helper inside your application: # # class FooController < ApplicationController # def index @@ -256,24 +285,27 @@ module Rails # end # end # - # There is also 'app' helper that gives you access to application's routes inside Engine: + # There is also 'main_app' helper that gives you access to application's routes inside Engine: # # module MyEngine # class BarController - # app.foo_path #=> /foo + # def index + # main_app.foo_path #=> /foo + # end # end # end # - # Note that :as option takes engine_name as default, so most of the time you can ommit it. + # Note that the :as option given to mount takes the engine_name as default, so most of the time + # you can simply ommit it. # - # If you want to generate url to engine's route using polymorphic_url, you can also use that helpers. - # - # Let's say that you want to create a form pointing to one of the engine's routes. All you need to do - # is passing helper as the first element in array with attributes for url: + # Finally, if you want to generate url to engine's route using polymorphic_url, you also need + # to pass the engine helper. Let's say that you want to create a form pointing to one of the + # engine's routes. All you need to do is pass the helper as the first element in array with + # attributes for url: # # form_for([my_engine, @user]) # - # This code will use my_engine.user_path(@user) to generate proper route. + # This code will use my_engine.user_path(@user) to generate the proper route. # # == Migrations & seed data # @@ -283,7 +315,7 @@ module Rails # To use engine's migrations in application you can use rake task, which copies them to # application's dir: # - # rake railties:copy_migrations + # rake ENGINE_NAME:install:migrations # # If your engine has migrations, you may also want to prepare data for the database in # seeds.rb file. You can load that data using load_seed method, e.g. @@ -295,7 +327,7 @@ module Rails autoload :Configuration, "rails/engine/configuration" class << self - attr_accessor :called_from, :namespaced + attr_accessor :called_from, :isolated alias :engine_name :railtie_name def inherited(base) @@ -330,37 +362,38 @@ module Rails @endpoint end - def namespace(mod) + def isolate_namespace(mod) engine_name(generate_railtie_name(mod)) - _railtie = self name = engine_name - mod.singleton_class.instance_eval do - define_method(:_railtie) do - _railtie - end - - define_method(:table_name_prefix) do - "#{name}_" - end - end - self.routes.default_scope = {:module => name} - - self.namespaced = true + self.isolated = true + + unless mod.respond_to?(:_railtie) + _railtie = self + mod.singleton_class.instance_eval do + define_method(:_railtie) do + _railtie + end + + define_method(:table_name_prefix) do + "#{name}_" + end + end + end end - def namespaced? - !!namespaced + def isolated? + !!isolated end end delegate :middleware, :root, :paths, :to => :config - delegate :engine_name, :namespaced?, :to => "self.class" + delegate :engine_name, :isolated?, :to => "self.class" def load_tasks super - config.paths.lib.tasks.to_a.sort.each { |ext| load(ext) } + paths["lib/tasks"].existent.sort.each { |ext| load(ext) } end def eager_load! @@ -400,6 +433,8 @@ module Rails def routes @routes ||= ActionDispatch::Routing::RouteSet.new + @routes.append(&Proc.new) if block_given? + @routes end def initializers @@ -418,7 +453,7 @@ module Rails # # Blog::Engine.load_seed def load_seed - seed_file = config.paths.db.seeds.to_a.first + seed_file = paths["db/seeds"].existent.first load(seed_file) if File.exist?(seed_file) end @@ -446,19 +481,22 @@ module Rails end initializer :add_routing_paths do |app| - paths.config.routes.to_a.each do |route| - app.routes_reloader.paths.unshift(route) if File.exists?(route) + paths = self.paths["config/routes"].existent + + if routes? || paths.any? + app.routes_reloader.paths.unshift(*paths) + app.routes_reloader.route_sets << routes end end # I18n load paths are a special case since the ones added # later have higher priority. initializer :add_locales do - config.i18n.railties_load_path.concat(paths.config.locales.to_a) + config.i18n.railties_load_path.concat(paths["config/locales"].existent) end initializer :add_view_paths do - views = paths.app.views.to_a + views = paths["app/views"].existent unless views.empty? ActiveSupport.on_load(:action_controller){ prepend_view_path(views) } ActiveSupport.on_load(:action_mailer){ prepend_view_path(views) } @@ -466,28 +504,27 @@ module Rails end initializer :load_environment_config, :before => :load_environment_hook do - environment = config.paths.config.environments.to_a.first + environment = paths["config/environments"].existent.first require environment if environment end initializer :append_asset_paths do config.asset_path ||= "/#{engine_name}%s" - public_path = config.paths.public.to_a.first + public_path = paths["public"].first if config.compiled_asset_path && File.exist?(public_path) config.static_asset_paths[config.compiled_asset_path] = public_path end end - initializer :prepend_helpers_path do - unless namespaced? - config.helpers_paths = [] unless config.respond_to?(:helpers_paths) - config.helpers_paths = config.paths.app.helpers.to_a + config.helpers_paths + initializer :prepend_helpers_path do |app| + if !isolated? || (app == self) + app.config.helpers_paths.unshift(*paths["app/helpers"].existent) end end initializer :load_config_initializers do - paths.config.initializers.to_a.sort.each do |initializer| + config.paths["config/initializers"].existent.sort.each do |initializer| load(initializer) end end @@ -497,7 +534,27 @@ module Rails # consistently executed after all the initializers above across all engines. end + rake_tasks do + next if self.is_a?(Rails::Application) + + namespace railtie_name do + namespace :install do + # TODO Add assets copying to this list + # TODO Skip this if there is no paths["db/migrate"] for the engine + desc "Copy migrations from #{railtie_name} to application" + task :migrations do + ENV["FROM"] = railtie_name + Rake::Task["railties:install:migrations"].invoke + end + end + end + end + protected + def routes? + defined?(@routes) + end + def find_root_with_flag(flag, default=nil) root_path = self.class.called_from @@ -509,7 +566,7 @@ module Rails root = File.exist?("#{root_path}/#{flag}") ? root_path : default raise "Could not find root path for #{self}" unless root - Config::CONFIG['host_os'] =~ /mswin|mingw/ ? + RbConfig::CONFIG['host_os'] =~ /mswin|mingw/ ? Pathname.new(root).expand_path : Pathname.new(root).realpath end |