diff options
Diffstat (limited to 'guides')
48 files changed, 1175 insertions, 226 deletions
diff --git a/guides/CHANGELOG.md b/guides/CHANGELOG.md index 3a602efb3d..d8b122d264 100644 --- a/guides/CHANGELOG.md +++ b/guides/CHANGELOG.md @@ -1,6 +1 @@ -## Rails 5.1.0.beta1 (February 23, 2017) ## - -* No changes. - - -Please check [5-0-stable](https://github.com/rails/rails/blob/5-0-stable/guides/CHANGELOG.md) for previous changes. +Please check [5-1-stable](https://github.com/rails/rails/blob/5-1-stable/guides/CHANGELOG.md) for previous changes. diff --git a/guides/Rakefile b/guides/Rakefile index ccb42f3273..3a6f10040f 100644 --- a/guides/Rakefile +++ b/guides/Rakefile @@ -2,15 +2,28 @@ namespace :guides do desc 'Generate guides (for authors), use ONLY=foo to process just "foo.md"' task generate: "generate:html" + # Guides are written in UTF-8, but the environment may be configured for some + # other locale, these tasks are responsible for ensuring the default external + # encoding is UTF-8. + # + # Real use cases: Generation was reported to fail on a machine configured with + # GBK (Chinese). The docs server once got misconfigured somehow and had "C", + # which broke generation too. + task :encoding do + %w(LANG LANGUAGE LC_ALL).each do |env_var| + ENV[env_var] = "en_US.UTF-8" + end + end + namespace :generate do desc "Generate HTML guides" - task :html do + task html: :encoding do ENV["WARNINGS"] = "1" # authors can't disable this ruby "rails_guides.rb" end desc "Generate .mobi file. The kindlegen executable must be in your PATH. You can get it for free from http://www.amazon.com/gp/feature.html?docId=1000765211" - task :kindle do + task kindle: :encoding do require "kindlerb" unless Kindlerb.kindlegen_available? abort "Please run `setupkindlerb` to install kindlegen" @@ -25,7 +38,7 @@ namespace :guides do # Validate guides ------------------------------------------------------------------------- desc 'Validate guides, use ONLY=foo to process just "foo.html"' - task :validate do + task validate: :encoding do ruby "w3c_validator.rb" end diff --git a/guides/assets/stylesheets/main.css b/guides/assets/stylesheets/main.css index b56699a0d0..b27776745a 100644 --- a/guides/assets/stylesheets/main.css +++ b/guides/assets/stylesheets/main.css @@ -294,6 +294,10 @@ a, a:link, a:visited { #mainCol a, #subCol a, #feature a {color: #980905;} #mainCol a code, #subCol a code, #feature a code {color: #980905;} +#mainCol a.anchorlink, #mainCol a.anchorlink code {color: #333;} +#mainCol a.anchorlink { text-decoration: none; } +#mainCol a.anchorlink:hover { text-decoration: underline; } + /* Navigation --------------------------------------- */ diff --git a/guides/bug_report_templates/action_controller_gem.rb b/guides/bug_report_templates/action_controller_gem.rb index 85d698f81b..1d059cc2a5 100644 --- a/guides/bug_report_templates/action_controller_gem.rb +++ b/guides/bug_report_templates/action_controller_gem.rb @@ -8,7 +8,7 @@ end gemfile(true) do source "https://rubygems.org" # Activate the gem you are reporting the issue against. - gem "rails", "5.0.1" + gem "rails", "5.1.0" end require "rack/test" diff --git a/guides/bug_report_templates/action_controller_master.rb b/guides/bug_report_templates/action_controller_master.rb index 486c7243ad..7644f6fe4a 100644 --- a/guides/bug_report_templates/action_controller_master.rb +++ b/guides/bug_report_templates/action_controller_master.rb @@ -8,6 +8,7 @@ end gemfile(true) do source "https://rubygems.org" gem "rails", github: "rails/rails" + gem "arel", github: "rails/arel" end require "action_controller/railtie" diff --git a/guides/bug_report_templates/active_job_gem.rb b/guides/bug_report_templates/active_job_gem.rb index f715caec95..252b270a0c 100644 --- a/guides/bug_report_templates/active_job_gem.rb +++ b/guides/bug_report_templates/active_job_gem.rb @@ -8,7 +8,7 @@ end gemfile(true) do source "https://rubygems.org" # Activate the gem you are reporting the issue against. - gem "activejob", "5.0.1" + gem "activejob", "5.1.0" end require "minitest/autorun" diff --git a/guides/bug_report_templates/active_job_master.rb b/guides/bug_report_templates/active_job_master.rb index f61518713f..7591470440 100644 --- a/guides/bug_report_templates/active_job_master.rb +++ b/guides/bug_report_templates/active_job_master.rb @@ -8,6 +8,7 @@ end gemfile(true) do source "https://rubygems.org" gem "rails", github: "rails/rails" + gem "arel", github: "rails/arel" end require "active_job" diff --git a/guides/bug_report_templates/active_record_gem.rb b/guides/bug_report_templates/active_record_gem.rb index 98edcb76b1..61d4e8d395 100644 --- a/guides/bug_report_templates/active_record_gem.rb +++ b/guides/bug_report_templates/active_record_gem.rb @@ -8,7 +8,7 @@ end gemfile(true) do source "https://rubygems.org" # Activate the gem you are reporting the issue against. - gem "activerecord", "5.0.1" + gem "activerecord", "5.1.0" gem "sqlite3" end diff --git a/guides/bug_report_templates/active_record_master.rb b/guides/bug_report_templates/active_record_master.rb index 7265a671b0..8bbc1ef19e 100644 --- a/guides/bug_report_templates/active_record_master.rb +++ b/guides/bug_report_templates/active_record_master.rb @@ -8,6 +8,7 @@ end gemfile(true) do source "https://rubygems.org" gem "rails", github: "rails/rails" + gem "arel", github: "rails/arel" gem "sqlite3" end diff --git a/guides/bug_report_templates/active_record_migrations_gem.rb b/guides/bug_report_templates/active_record_migrations_gem.rb index ece6ae4f12..0c398e334a 100644 --- a/guides/bug_report_templates/active_record_migrations_gem.rb +++ b/guides/bug_report_templates/active_record_migrations_gem.rb @@ -8,7 +8,7 @@ end gemfile(true) do source "https://rubygems.org" # Activate the gem you are reporting the issue against. - gem "activerecord", "5.0.1" + gem "activerecord", "5.1.0" gem "sqlite3" end diff --git a/guides/bug_report_templates/active_record_migrations_master.rb b/guides/bug_report_templates/active_record_migrations_master.rb index 13a375d1ba..84a4b71909 100644 --- a/guides/bug_report_templates/active_record_migrations_master.rb +++ b/guides/bug_report_templates/active_record_migrations_master.rb @@ -8,6 +8,7 @@ end gemfile(true) do source "https://rubygems.org" gem "rails", github: "rails/rails" + gem "arel", github: "rails/arel" gem "sqlite3" end diff --git a/guides/bug_report_templates/generic_gem.rb b/guides/bug_report_templates/generic_gem.rb index fa9f94eea0..4dcd04ea27 100644 --- a/guides/bug_report_templates/generic_gem.rb +++ b/guides/bug_report_templates/generic_gem.rb @@ -8,7 +8,7 @@ end gemfile(true) do source "https://rubygems.org" # Activate the gem you are reporting the issue against. - gem "activesupport", "5.0.1" + gem "activesupport", "5.1.0" end require "active_support/core_ext/object/blank" diff --git a/guides/bug_report_templates/generic_master.rb b/guides/bug_report_templates/generic_master.rb index d3a7ae4ac4..ed45726e92 100644 --- a/guides/bug_report_templates/generic_master.rb +++ b/guides/bug_report_templates/generic_master.rb @@ -8,6 +8,7 @@ end gemfile(true) do source "https://rubygems.org" gem "rails", github: "rails/rails" + gem "arel", github: "rails/arel" end require "active_support" diff --git a/guides/rails_guides/generator.rb b/guides/rails_guides/generator.rb index 28164a3cb4..35f014747c 100644 --- a/guides/rails_guides/generator.rb +++ b/guides/rails_guides/generator.rb @@ -73,7 +73,7 @@ module RailsGuides @output_dir = "#{@guides_dir}/output" @output_dir += "/kindle" if @kindle - @source_dir += "/#{@language}" if @language + @output_dir += "/#{@language}" if @language end def create_output_dir_if_needed diff --git a/guides/rails_guides/helpers.rb b/guides/rails_guides/helpers.rb index 6f4b0b492c..2a193ca6b5 100644 --- a/guides/rails_guides/helpers.rb +++ b/guides/rails_guides/helpers.rb @@ -15,7 +15,7 @@ module RailsGuides end def documents_by_section - @documents_by_section ||= YAML.load_file(File.expand_path("../../source/#{@lang ? @lang + '/' : ''}documents.yaml", __FILE__)) + @documents_by_section ||= YAML.load_file(File.expand_path("../../source/#{@language ? @language + '/' : ''}documents.yaml", __FILE__)) end def documents_flat diff --git a/guides/rails_guides/markdown.rb b/guides/rails_guides/markdown.rb index bf2cc82c7c..02d58601c4 100644 --- a/guides/rails_guides/markdown.rb +++ b/guides/rails_guides/markdown.rb @@ -105,6 +105,10 @@ module RailsGuides node.inner_html = "#{node_index(hierarchy)} #{node.inner_html}" end end + + doc.css("h3, h4, h5, h6").each do |node| + node.inner_html = "<a class='anchorlink' href='##{node[:id]}'>#{node.inner_html}</a>" + end end.to_html end end diff --git a/guides/rails_guides/markdown/renderer.rb b/guides/rails_guides/markdown/renderer.rb index 20cbd568c9..9d43c10be6 100644 --- a/guides/rails_guides/markdown/renderer.rb +++ b/guides/rails_guides/markdown/renderer.rb @@ -94,15 +94,15 @@ HTML tree = version || edge root = file_path[%r{(.+)/}, 1] - path = case root - when "abstract_controller", "action_controller", "action_dispatch" - "actionpack/lib/#{file_path}" - when /\A(action|active)_/ - "#{root.sub("_", "")}/lib/#{file_path}" - else - file_path - end - + path = \ + case root + when "abstract_controller", "action_controller", "action_dispatch" + "actionpack/lib/#{file_path}" + when /\A(action|active)_/ + "#{root.sub("_", "")}/lib/#{file_path}" + else + file_path + end "https://github.com/rails/rails/tree/#{tree}/#{path}" end diff --git a/guides/source/5_1_release_notes.md b/guides/source/5_1_release_notes.md new file mode 100644 index 0000000000..fa92b9e5f8 --- /dev/null +++ b/guides/source/5_1_release_notes.md @@ -0,0 +1,652 @@ +**DO NOT READ THIS FILE ON GITHUB, GUIDES ARE PUBLISHED ON http://guides.rubyonrails.org.** + +Ruby on Rails 5.1 Release Notes +=============================== + +Highlights in Rails 5.1: + +* Yarn Support +* Optional Webpack support +* jQuery no longer a default dependency +* System tests +* Encrypted secrets +* Parameterized mailers +* Direct & resolved routes +* Unification of form_for and form_tag into form_with + +These release notes cover only the major changes. To learn about various bug +fixes and changes, please refer to the change logs or check out the [list of +commits](https://github.com/rails/rails/commits/5-1-stable) in the main Rails +repository on GitHub. + +-------------------------------------------------------------------------------- + +Upgrading to Rails 5.1 +---------------------- + +If you're upgrading an existing application, it's a great idea to have good test +coverage before going in. You should also first upgrade to Rails 5.0 in case you +haven't and make sure your application still runs as expected before attempting +an update to Rails 5.1. A list of things to watch out for when upgrading is +available in the +[Upgrading Ruby on Rails](upgrading_ruby_on_rails.html#upgrading-from-rails-5-0-to-rails-5-1) +guide. + + +Major Features +-------------- + +### Yarn Support + +[Pull Request](https://github.com/rails/rails/pull/26836) + +Rails 5.1 allows managing JavaScript dependencies +from NPM via Yarn. This will make it easy to use libraries like React, VueJS +or any other library from NPM world. The Yarn support is integrated with +the asset pipeline so that all dependencies will work seamlessly with the +Rails 5.1 app. + +### Optional Webpack support + +[Pull Request](https://github.com/rails/rails/pull/27288) + +Rails apps can integrate with [Webpack](https://webpack.js.org/), a JavaScript +asset bundler, more easily using the new [Webpacker](https://github.com/rails/webpacker) +gem. Use the `--webpack` flag when generating new applications to enable Webpack +integration. + +This is fully compatible with the asset pipeline, which you can continue to use for +images, fonts, sounds, and other assets. You can even have some JavaScript code +managed by the asset pipeline, and other code processed via Webpack. All of this is managed +by Yarn, which is enabled by default. + +### jQuery no longer a default dependency + +[Pull Request](https://github.com/rails/rails/pull/27113) + +jQuery was required by default in earlier versions of Rails to provide features +like `data-remote`, `data-confirm` and other parts of Rails' Unobtrusive JavaScript +offerings. It is no longer required, as the UJS has been rewritten to use plain, +vanilla JavaScript. This code now ships inside of Action View as +`rails-ujs`. + +You can still use jQuery if needed, but it is no longer required by default. + +### System tests + +[Pull Request](https://github.com/rails/rails/pull/26703) + +Rails 5.1 has baked-in support for writing Capybara tests, in the form of +System tests. You no longer need to worry about configuring Capybara and +database cleaning strategies for such tests. Rails 5.1 provides a wrapper +for running tests in Chrome with additional features such as failure +screenshots. + +### Encrypted secrets + +[Pull Request](https://github.com/rails/rails/pull/28038) + +Rails now allows management of application secrets in a secure way, +inspired by the [sekrets](https://github.com/ahoward/sekrets) gem. + +Run `bin/rails secrets:setup` to setup a new encrypted secrets file. This will +also generate a master key, which must be stored outside of the repository. The +secrets themselves can then be safely checked into the revision control system, +in an encrypted form. + +Secrets will be decrypted in production, using a key stored either in the +`RAILS_MASTER_KEY` environment variable, or in a key file. + +### Parameterized mailers + +[Pull Request](https://github.com/rails/rails/pull/27825) + +Allows specifying common parameters used for all methods in a mailer class in +order to share instance variables, headers and other common setup. + +``` ruby +class InvitationsMailer < ApplicationMailer + before_action { @inviter, @invitee = params[:inviter], params[:invitee] } + before_action { @account = params[:inviter].account } + + def account_invitation + mail subject: "#{@inviter.name} invited you to their Basecamp (#{@account.name})" + end +end + +InvitationsMailer.with(inviter: person_a, invitee: person_b) + .account_invitation.deliver_later +``` + +### Direct & resolved routes + +[Pull Request](https://github.com/rails/rails/pull/23138) + +Rails 5.1 adds two new methods, `resolve` and `direct`, to the routing +DSL. The `resolve` method allows customizing polymorphic mapping of models. + +``` ruby +resource :basket + +resolve("Basket") { [:basket] } +``` + +``` erb +<%= form_for @basket do |form| %> + <!-- basket form --> +<% end %> +``` + +This will generate the singular URL `/basket` instead of the usual `/baskets/:id`. + +The `direct` method allows creation of custom URL helpers. + +``` ruby +direct(:homepage) { "http://www.rubyonrails.org" } + +>> homepage_url +=> "http://www.rubyonrails.org" +``` + +The return value of the block must be a valid argument for the `url_for` +method. So, you can pass a valid string URL, Hash, Array, an +Active Model instance, or an Active Model class. + +``` ruby +direct :commentable do |model| + [ model, anchor: model.dom_id ] +end + +direct :main do + { controller: 'pages', action: 'index', subdomain: 'www' } +end +``` + +### Unification of form_for and form_tag into form_with + +[Pull Request](https://github.com/rails/rails/pull/26976) + +Before Rails 5.1, there were two interfaces for handling HTML forms: +`form_for` for model instances and `form_tag` for custom URLs. + +Rails 5.1 combines both of these interfaces with `form_with`, and +can generate form tags based on URLs, scopes or models. + +Using just a URL: + +``` erb +<%= form_with url: posts_path do |form| %> + <%= form.text_field :title %> +<% end %> + +<%# Will generate %> + +<form action="/posts" method="post" data-remote="true"> + <input type="text" name="title"> +</form> +``` + +Adding a scope prefixes the input field names: + +``` erb +<%= form_with scope: :post, url: posts_path do |form| %> + <%= form.text_field :title %> +<% end %> + +<%# Will generate %> + +<form action="/posts" method="post" data-remote="true"> + <input type="text" name="post[title]"> +</form> +``` + +Using a model infers both the URL and scope: + +``` erb +<%= form_with model: Post.new do |form| %> + <%= form.text_field :title %> +<% end %> + +<%# Will generate %> + +<form action="/posts" method="post" data-remote="true"> + <input type="text" name="post[title]"> +</form> +``` + +An existing model makes an update form and fills out field values: + +``` erb +<%= form_with model: Post.first do |form| %> + <%= form.text_field :title %> +<% end %> + +<%# Will generate %> + +<form action="/posts/1" method="post" data-remote="true"> + <input type="hidden" name="_method" value="patch"> + <input type="text" name="post[title]" value="<the title of the post>"> +</form> +``` + +Incompatibilities +----------------- + +The following changes may require immediate action upon upgrade. + +### Transactional tests with multiple connections + +Transactional tests now wrap all Active Record connections in database +transactions. + +When a test spawns additional threads, and those threads obtain database +connections, those connections are now handled specially: + +The threads will share a single connection, which is inside the managed +transaction. This ensures all threads see the database in the same +state, ignoring the outermost transaction. Previously, such additional +connections were unable to see the fixture rows, for example. + +When a thread enters a nested transaction, it will temporarily obtain +exclusive use of the connection, to maintain isolation. + +If your tests currently rely on obtaining a separate, +outside-of-transaction, connection in a spawned thread, you'll need to +switch to more explicit connection management. + +If your tests spawn threads and those threads interact while also using +explicit database transactions, this change may introduce a deadlock. + +The easy way to opt out of this new behavior is to disable transactional +tests on any test cases it affects. + +Railties +-------- + +Please refer to the [Changelog][railties] for detailed changes. + +### Removals + +* Remove deprecated `config.static_cache_control`. + ([commit](https://github.com/rails/rails/commit/c861decd44198f8d7d774ee6a74194d1ac1a5a13)) + +* Remove deprecated `config.serve_static_files`. + ([commit](https://github.com/rails/rails/commit/0129ca2eeb6d5b2ea8c6e6be38eeb770fe45f1fa)) + +* Remove deprecated file `rails/rack/debugger`. + ([commit](https://github.com/rails/rails/commit/7563bf7b46e6f04e160d664e284a33052f9804b8)) + +* Remove deprecated tasks: `rails:update`, `rails:template`, `rails:template:copy`, + `rails:update:configs` and `rails:update:bin`. + ([commit](https://github.com/rails/rails/commit/f7782812f7e727178e4a743aa2874c078b722eef)) + +* Remove deprecated `CONTROLLER` environment variable for `routes` task. + ([commit](https://github.com/rails/rails/commit/f9ed83321ac1d1902578a0aacdfe55d3db754219)) + +* Remove -j (--javascript) option from `rails new` command. + ([Pull Request](https://github.com/rails/rails/pull/28546)) + +### Notable changes + +* Added a shared section to `config/secrets.yml` that will be loaded for all + environments. + ([commit](https://github.com/rails/rails/commit/e530534265d2c32b5c5f772e81cb9002dcf5e9cf)) + +* The config file `config/secrets.yml` is now loaded in with all keys as symbols. + ([Pull Request](https://github.com/rails/rails/pull/26929)) + +* Removed jquery-rails from default stack. rails-ujs, which is shipped + with Action View, is included as default UJS adapter. + ([Pull Request](https://github.com/rails/rails/pull/27113)) + +* Add Yarn support in new apps with a yarn binstub and package.json. + ([Pull Request](https://github.com/rails/rails/pull/26836)) + +* Add Webpack support in new apps via the `--webpack` option, which will delegate + to the rails/webpacker gem. + ([Pull Request](https://github.com/rails/rails/pull/27288)) + +* Initialize Git repo when generating new app, if option `--skip-git` is not + provided. + ([Pull Request](https://github.com/rails/rails/pull/27632)) + +* Add encrypted secrets in `config/secrets.yml.enc`. + ([Pull Request](https://github.com/rails/rails/pull/28038)) + +* Display railtie class name in `rails initializers`. + ([Pull Request](https://github.com/rails/rails/pull/25257)) + +Action Cable +----------- + +Please refer to the [Changelog][action-cable] for detailed changes. + +### Notable changes + +* Added support for `channel_prefix` to Redis and evented Redis adapters + in `cable.yml` to avoid name collisions when using the same Redis server + with multiple applications. + ([Pull Request](https://github.com/rails/rails/pull/27425)) + +* Add `ActiveSupport::Notifications` hook for broadcasting data. + ([Pull Request](https://github.com/rails/rails/pull/24988)) + +Action Pack +----------- + +Please refer to the [Changelog][action-pack] for detailed changes. + +### Removals + +* Removed support for non-keyword arguments in `#process`, `#get`, `#post`, + `#patch`, `#put`, `#delete`, and `#head` for the `ActionDispatch::IntegrationTest` + and `ActionController::TestCase` classes. + ([Commit](https://github.com/rails/rails/commit/98b8309569a326910a723f521911e54994b112fb), + [Commit](https://github.com/rails/rails/commit/de9542acd56f60d281465a59eac11e15ca8b3323)) + +* Removed deprecated `ActionDispatch::Callbacks.to_prepare` and + `ActionDispatch::Callbacks.to_cleanup`. + ([Commit](https://github.com/rails/rails/commit/3f2b7d60a52ffb2ad2d4fcf889c06b631db1946b)) + +* Removed deprecated methods related to controller filters. + ([Commit](https://github.com/rails/rails/commit/d7be30e8babf5e37a891522869e7b0191b79b757)) + +### Deprecations + +* Deprecated `config.action_controller.raise_on_unfiltered_parameters`. + It doesn't have any effect in Rails 5.1. + ([Commit](https://github.com/rails/rails/commit/c6640fb62b10db26004a998d2ece98baede509e5)) + +### Notable changes + +* Added the `direct` and `resolve` methods to the routing DSL. + ([Pull Request](https://github.com/rails/rails/pull/23138)) + +* Added a new `ActionDispatch::SystemTestCase` class to write system tests in + your applications. + ([Pull Request](https://github.com/rails/rails/pull/26703)) + +Action View +------------- + +Please refer to the [Changelog][action-view] for detailed changes. + +### Removals + +* Removed deprecated `#original_exception` in `ActionView::Template::Error`. + ([commit](https://github.com/rails/rails/commit/b9ba263e5aaa151808df058f5babfed016a1879f)) + +* Remove the option `encode_special_chars` misnomer from `strip_tags`. + ([Pull Request](https://github.com/rails/rails/pull/28061)) + +### Deprecations + +* Deprecated Erubis ERB handler in favor of Erubi. + ([Pull Request](https://github.com/rails/rails/pull/27757)) + +### Notable changes + +* Raw template handler (the default template handler in Rails 5) now outputs + HTML-safe strings. + ([commit](https://github.com/rails/rails/commit/1de0df86695f8fa2eeae6b8b46f9b53decfa6ec8)) + +* Change `datetime_field` and `datetime_field_tag` to generate `datetime-local` + fields. + ([Pull Request](https://github.com/rails/rails/pull/28061)) + +* New Builder-style syntax for HTML tags (`tag.div`, `tag.br`, etc.) + ([Pull Request](https://github.com/rails/rails/pull/25543)) + +* Add `form_with` to unify `form_tag` and `form_for` usage. + ([Pull Request](https://github.com/rails/rails/pull/26976)) + +* Add `check_parameters` option to `current_page?`. + ([Pull Request](https://github.com/rails/rails/pull/27549)) + +Action Mailer +------------- + +Please refer to the [Changelog][action-mailer] for detailed changes. + +### Notable changes + +* Allowed setting custom content type when attachments are included + and body is set inline. + ([Pull Request](https://github.com/rails/rails/pull/27227)) + +* Allowed passing lambdas as values to the `default` method. + ([Commit](https://github.com/rails/rails/commit/1cec84ad2ddd843484ed40b1eb7492063ce71baf)) + +* Added support for parameterized invocation of mailers to share before filters and defaults + between different mailer actions. + ([Commit](https://github.com/rails/rails/commit/1cec84ad2ddd843484ed40b1eb7492063ce71baf)) + +* Passed the incoming arguments to the mailer action to `process.action_mailer` event under + an `args` key. + ([Pull Request](https://github.com/rails/rails/pull/27900)) + +Active Record +------------- + +Please refer to the [Changelog][active-record] for detailed changes. + +### Removals + +* Removed support for passing arguments and block at the same time to + `ActiveRecord::QueryMethods#select`. + ([Commit](https://github.com/rails/rails/commit/4fc3366d9d99a0eb19e45ad2bf38534efbf8c8ce)) + +* Removed deprecated `activerecord.errors.messages.restrict_dependent_destroy.one` and + `activerecord.errors.messages.restrict_dependent_destroy.many` i18n scopes. + ([Commit](https://github.com/rails/rails/commit/00e3973a311)) + +* Removed deprecated force reload argument in singular and collection association readers. + ([Commit](https://github.com/rails/rails/commit/09cac8c67af)) + +* Removed deprecated support for passing a column to `#quote`. + ([Commit](https://github.com/rails/rails/commit/e646bad5b7c)) + +* Removed deprecated `name` arguments from `#tables`. + ([Commit](https://github.com/rails/rails/commit/d5be101dd02214468a27b6839ffe338cfe8ef5f3)) + +* Removed deprecated behavior of `#tables` and `#table_exists?` to return tables and views + to return only tables and not views. + ([Commit](https://github.com/rails/rails/commit/5973a984c369a63720c2ac18b71012b8347479a8)) + +* Removed deprecated `original_exception` argument in `ActiveRecord::StatementInvalid#initialize` + and `ActiveRecord::StatementInvalid#original_exception`. + ([Commit](https://github.com/rails/rails/commit/bc6c5df4699d3f6b4a61dd12328f9e0f1bd6cf46)) + +* Removed deprecated support of passing a class as a value in a query. + ([Commit](https://github.com/rails/rails/commit/b4664864c972463c7437ad983832d2582186e886)) + +* Removed deprecated support to query using commas on LIMIT. + ([Commit](https://github.com/rails/rails/commit/fc3e67964753fb5166ccbd2030d7382e1976f393)) + +* Removed deprecated `conditions` parameter from `#destroy_all`. + ([Commit](https://github.com/rails/rails/commit/d31a6d1384cd740c8518d0bf695b550d2a3a4e9b)) + +* Removed deprecated `conditions` parameter from `#delete_all`. + ([Commit](https://github.com/rails/rails/pull/27503/commits/e7381d289e4f8751dcec9553dcb4d32153bd922b)) + +* Removed deprecated method `#load_schema_for` in favor of `#load_schema`. + ([Commit](https://github.com/rails/rails/commit/419e06b56c3b0229f0c72d3e4cdf59d34d8e5545)) + +* Removed deprecated `#raise_in_transactional_callbacks` configuration. + ([Commit](https://github.com/rails/rails/commit/8029f779b8a1dd9848fee0b7967c2e0849bf6e07)) + +* Removed deprecated `#use_transactional_fixtures` configuration. + ([Commit](https://github.com/rails/rails/commit/3955218dc163f61c932ee80af525e7cd440514b3)) + +### Deprecations + +* Deprecated `error_on_ignored_order_or_limit` flag in favor of + `error_on_ignored_order`. + ([Commit](https://github.com/rails/rails/commit/451437c6f57e66cc7586ec966e530493927098c7)) + +* Deprecated `sanitize_conditions` in favor of `sanitize_sql`. + ([Pull Request](https://github.com/rails/rails/pull/25999)) + +* Deprecated `supports_migrations?` on connection adapters. + ([Pull Request](https://github.com/rails/rails/pull/28172)) + +* Deprecated `Migrator.schema_migrations_table_name`, use `SchemaMigration.table_name` instead. + ([Pull Request](https://github.com/rails/rails/pull/28351)) + +* Deprecated using `#quoted_id` in quoting and type casting. + ([Pull Request](https://github.com/rails/rails/pull/27962)) + +* Deprecated passing `default` argument to `#index_name_exists?`. + ([Pull Request](https://github.com/rails/rails/pull/26930)) + +### Notable changes + +* Change Default Primary Keys to BIGINT. + ([Pull Request](https://github.com/rails/rails/pull/26266)) + +* Virtual/generated column support for MySQL 5.7.5+ and MariaDB 5.2.0+. + ([Commit](https://github.com/rails/rails/commit/65bf1c60053e727835e06392d27a2fb49665484c)) + +* Added support for limits in batch processing. + ([Commit](https://github.com/rails/rails/commit/451437c6f57e66cc7586ec966e530493927098c7)) + +* Transactional tests now wrap all Active Record connections in database + transactions. + ([Pull Request](https://github.com/rails/rails/pull/28726)) + +* Skipped comments in the output of `mysqldump` command by default. + ([Pull Request](https://github.com/rails/rails/pull/23301)) + +* Fixed `ActiveRecord::Relation#count` to use Ruby's `Enumerable#count` for counting + records when a block is passed as argument instead of silently ignoring the + passed block. + ([Pull Request](https://github.com/rails/rails/pull/24203)) + +* Pass `"-v ON_ERROR_STOP=1"` flag with `psql` command to not suppress SQL errors. + ([Pull Request](https://github.com/rails/rails/pull/24773)) + +* Add `ActiveRecord::Base.connection_pool.stat`. + ([Pull Request](https://github.com/rails/rails/pull/26988)) + +* Inheriting directly from `ActiveRecord::Migration` raises an error. + Specify the Rails version for which the migration was written for. + ([Commit](https://github.com/rails/rails/commit/249f71a22ab21c03915da5606a063d321f04d4d3)) + +* An error is raised when `through` association has ambiguous reflection name. + ([Commit](https://github.com/rails/rails/commit/0944182ad7ed70d99b078b22426cbf844edd3f61)) + +Active Model +------------ + +Please refer to the [Changelog][active-model] for detailed changes. + +### Removals + +* Removed deprecated methods in `ActiveModel::Errors`. + ([commit](https://github.com/rails/rails/commit/9de6457ab0767ebab7f2c8bc583420fda072e2bd)) + +* Removed deprecated `:tokenizer` option in the length validator. + ([commit](https://github.com/rails/rails/commit/6a78e0ecd6122a6b1be9a95e6c4e21e10e429513)) + +* Remove deprecated behavior that halts callbacks when the return value is false. + ([commit](https://github.com/rails/rails/commit/3a25cdca3e0d29ee2040931d0cb6c275d612dffe)) + +### Notable changes + +* The original string assigned to a model attribute is no longer incorrectly + frozen. + ([Pull Request](https://github.com/rails/rails/pull/28729)) + +Active Job +----------- + +Please refer to the [Changelog][active-job] for detailed changes. + +### Removals + +* Removed deprecated support to passing the adapter class to `.queue_adapter`. + ([commit](https://github.com/rails/rails/commit/d1fc0a5eb286600abf8505516897b96c2f1ef3f6)) + +* Removed deprecated `#original_exception` in `ActiveJob::DeserializationError`. + ([commit](https://github.com/rails/rails/commit/d861a1fcf8401a173876489d8cee1ede1cecde3b)) + +### Notable changes + +* Added declarative exception handling via `ActiveJob::Base.retry_on` and `ActiveJob::Base.discard_on`. + ([Pull Request](https://github.com/rails/rails/pull/25991)) + +* Yield the job instance so you have access to things like `job.arguments` on + the custom logic after retries fail. + ([commit](https://github.com/rails/rails/commit/a1e4c197cb12fef66530a2edfaeda75566088d1f)) + +Active Support +-------------- + +Please refer to the [Changelog][active-support] for detailed changes. + +### Removals + +* Removed the `ActiveSupport::Concurrency::Latch` class. + ([Commit](https://github.com/rails/rails/commit/0d7bd2031b4054fbdeab0a00dd58b1b08fb7fea6)) + +* Removed `halt_callback_chains_on_return_false`. + ([Commit](https://github.com/rails/rails/commit/4e63ce53fc25c3bc15c5ebf54bab54fa847ee02a)) + +* Removed deprecated behavior that halts callbacks when the return is false. + ([Commit](https://github.com/rails/rails/commit/3a25cdca3e0d29ee2040931d0cb6c275d612dffe)) + +### Deprecations + +* The top level `HashWithIndifferentAccess` class has been softly deprecated + in favor of the `ActiveSupport::HashWithIndifferentAccess` one. + ([Pull Request](https://github.com/rails/rails/pull/28157)) + +* Deprecated passing string to `:if` and `:unless` conditional options on `set_callback` and `skip_callback`. + ([Commit](https://github.com/rails/rails/commit/0952552) + +### Notable changes + +* Fixed duration parsing and traveling to make it consistent across DST changes. + ([Commit](https://github.com/rails/rails/commit/8931916f4a1c1d8e70c06063ba63928c5c7eab1e), + [Pull Request](https://github.com/rails/rails/pull/26597)) + +* Updated Unicode to version 9.0.0. + ([Pull Request](https://github.com/rails/rails/pull/27822)) + +* Add Duration#before and #after as aliases for #ago and #since. + ([Pull Request](https://github.com/rails/rails/pull/27721)) + +* Added `Module#delegate_missing_to` to delegate method calls not + defined for the current object to a proxy object. + ([Pull Request](https://github.com/rails/rails/pull/23930)) + +* Added `Date#all_day` which returns a range representing the whole day + of the current date & time. + ([Pull Request](https://github.com/rails/rails/pull/24930)) + +* Introduced the `assert_changes` and `assert_no_changes` methods for tests. + ([Pull Request](https://github.com/rails/rails/pull/25393)) + +* The `travel` and `travel_to` methods now raise on nested calls. + ([Pull Request](https://github.com/rails/rails/pull/24890)) + +* Update `DateTime#change` to support usec and nsec. + ([Pull Request](https://github.com/rails/rails/pull/28242)) + +Credits +------- + +See the +[full list of contributors to Rails](http://contributors.rubyonrails.org/) for +the many people who spent many hours making Rails, the stable and robust +framework it is. Kudos to all of them. + +[railties]: https://github.com/rails/rails/blob/5-1-stable/railties/CHANGELOG.md +[action-pack]: https://github.com/rails/rails/blob/5-1-stable/actionpack/CHANGELOG.md +[action-view]: https://github.com/rails/rails/blob/5-1-stable/actionview/CHANGELOG.md +[action-mailer]: https://github.com/rails/rails/blob/5-1-stable/actionmailer/CHANGELOG.md +[action-cable]: https://github.com/rails/rails/blob/5-1-stable/actioncable/CHANGELOG.md +[active-record]: https://github.com/rails/rails/blob/5-1-stable/activerecord/CHANGELOG.md +[active-model]: https://github.com/rails/rails/blob/5-1-stable/activemodel/CHANGELOG.md +[active-support]: https://github.com/rails/rails/blob/5-1-stable/activesupport/CHANGELOG.md +[active-job]: https://github.com/rails/rails/blob/5-1-stable/activejob/CHANGELOG.md diff --git a/guides/source/_welcome.html.erb b/guides/source/_welcome.html.erb index 5bd1ea4d22..8afec00018 100644 --- a/guides/source/_welcome.html.erb +++ b/guides/source/_welcome.html.erb @@ -10,12 +10,13 @@ </p> <% else %> <p> - These are the new guides for Rails 5.0 based on <a href="https://github.com/rails/rails/tree/<%= @version %>"><%= @version %></a>. + These are the new guides for Rails 5.1 based on <a href="https://github.com/rails/rails/tree/<%= @version %>"><%= @version %></a>. These guides are designed to make you immediately productive with Rails, and to help you understand how all of the pieces fit together. </p> <% end %> <p> The guides for earlier releases: +<a href="http://guides.rubyonrails.org/v5.0/">Rails 5.0</a>, <a href="http://guides.rubyonrails.org/v4.2/">Rails 4.2</a>, <a href="http://guides.rubyonrails.org/v4.1/">Rails 4.1</a>, <a href="http://guides.rubyonrails.org/v4.0/">Rails 4.0</a>, diff --git a/guides/source/action_cable_overview.md b/guides/source/action_cable_overview.md index e929945dd0..50a28571b4 100644 --- a/guides/source/action_cable_overview.md +++ b/guides/source/action_cable_overview.md @@ -6,7 +6,7 @@ incorporate real-time features into your Rails application. After reading this guide, you will know: -* What Action Cable is and its integration on backend and frontend +* What Action Cable is and its integration on backend and frontend * How to setup Action Cable * How to setup channels * Deployment and Architecture setup for running Action Cable @@ -64,8 +64,8 @@ module ApplicationCable private def find_verified_user - if current_user = User.find_by(id: cookies.signed[:user_id]) - current_user + if verified_user = User.find_by(id: cookies.signed[:user_id]) + verified_user else reject_unauthorized_connection end diff --git a/guides/source/action_controller_overview.md b/guides/source/action_controller_overview.md index 40eb838d32..5d987264f5 100644 --- a/guides/source/action_controller_overview.md +++ b/guides/source/action_controller_overview.md @@ -61,7 +61,7 @@ end The [Layouts & Rendering Guide](layouts_and_rendering.html) explains this in more detail. -`ApplicationController` inherits from `ActionController::Base`, which defines a number of helpful methods. This guide will cover some of these, but if you're curious to see what's in there, you can see all of them in the API documentation or in the source itself. +`ApplicationController` inherits from `ActionController::Base`, which defines a number of helpful methods. This guide will cover some of these, but if you're curious to see what's in there, you can see all of them in the [API documentation](http://api.rubyonrails.org/classes/ActionController.html) or in the source itself. Only public methods are callable as actions. It is a best practice to lower the visibility of methods (with `private` or `protected`) which are not intended to be actions, like auxiliary methods or filters. @@ -719,7 +719,7 @@ Now, the `LoginsController`'s `new` and `create` actions will work as before wit In addition to "before" filters, you can also run filters after an action has been executed, or both before and after. -"after" filters are similar to "before" filters, but because the action has already been run they have access to the response data that's about to be sent to the client. Obviously, "after" filters cannot stop the action from running. +"after" filters are similar to "before" filters, but because the action has already been run they have access to the response data that's about to be sent to the client. Obviously, "after" filters cannot stop the action from running. Please note that "after" filters are executed only after a successful action, but not when an exception is raised in the request cycle. "around" filters are responsible for running their associated actions by yielding, similar to how Rack middlewares work. diff --git a/guides/source/action_mailer_basics.md b/guides/source/action_mailer_basics.md index 380fdac658..65146ee7da 100644 --- a/guides/source/action_mailer_basics.md +++ b/guides/source/action_mailer_basics.md @@ -550,8 +550,9 @@ url helper. <%= user_url(@user, host: 'example.com') %> ``` -NOTE: non-`GET` links require [jQuery UJS](https://github.com/rails/jquery-ujs) -and won't work in mailer templates. They will result in normal `GET` requests. +NOTE: non-`GET` links require [rails-ujs](https://github.com/rails/rails/blob/master/actionview/app/assets/javascripts) or +[jQuery UJS](https://github.com/rails/jquery-ujs), and won't work in mailer templates. +They will result in normal `GET` requests. ### Adding images in Action Mailer Views diff --git a/guides/source/active_job_basics.md b/guides/source/active_job_basics.md index c65d1e6de5..b58ca61848 100644 --- a/guides/source/active_job_basics.md +++ b/guides/source/active_job_basics.md @@ -114,7 +114,7 @@ For enqueuing and executing jobs in production you need to set up a queuing back that is to say you need to decide for a 3rd-party queuing library that Rails should use. Rails itself only provides an in-process queuing system, which only keeps the jobs in RAM. If the process crashes or the machine is reset, then all outstanding jobs are lost with the -default async back-end. This may be fine for smaller apps or non-critical jobs, but most +default async backend. This may be fine for smaller apps or non-critical jobs, but most production apps will need to pick a persistent backend. ### Backends diff --git a/guides/source/active_model_basics.md b/guides/source/active_model_basics.md index 732e553c62..b8f076a27b 100644 --- a/guides/source/active_model_basics.md +++ b/guides/source/active_model_basics.md @@ -87,7 +87,7 @@ end ### Conversion If a class defines `persisted?` and `id` methods, then you can include the -`ActiveModel::Conversion` module in that class and call the Rails conversion +`ActiveModel::Conversion` module in that class, and call the Rails conversion methods on objects of that class. ```ruby @@ -156,16 +156,17 @@ person.changed? # => false person.first_name = "First Name" person.first_name # => "First Name" -# returns true if any of the attributes have unsaved changes, false otherwise. +# returns true if any of the attributes have unsaved changes. person.changed? # => true # returns a list of attributes that have changed before saving. person.changed # => ["first_name"] -# returns a hash of the attributes that have changed with their original values. +# returns a Hash of the attributes that have changed with their original values. person.changed_attributes # => {"first_name"=>nil} -# returns a hash of changes, with the attribute names as the keys, and the values will be an array of the old and new value for that field. +# returns a Hash of changes, with the attribute names as the keys, and the +# values as an array of the old and new values for that field. person.changes # => {"first_name"=>[nil, "First Name"]} ``` @@ -179,7 +180,7 @@ person.first_name # => "First Name" person.first_name_changed? # => true ``` -Track what was the previous value of the attribute. +Track the previous value of the attribute. ```ruby # attr_name_was accessor @@ -187,7 +188,7 @@ person.first_name_was # => nil ``` Track both previous and current value of the changed attribute. Returns an array -if changed, else returns nil. +if changed, otherwise returns nil. ```ruby # attr_name_change @@ -197,7 +198,7 @@ person.last_name_change # => nil ### Validations -The `ActiveModel::Validations` module adds the ability to validate class objects +The `ActiveModel::Validations` module adds the ability to validate objects like in Active Record. ```ruby @@ -225,7 +226,7 @@ person.valid? # => raises ActiveModel::StrictValidationFa ### Naming -`ActiveModel::Naming` adds a number of class methods which make the naming and routing +`ActiveModel::Naming` adds a number of class methods which make naming and routing easier to manage. The module defines the `model_name` class method which will define a number of accessors using some `ActiveSupport::Inflector` methods. @@ -248,7 +249,7 @@ Person.model_name.singular_route_key # => "person" ### Model -`ActiveModel::Model` adds the ability to a class to work with Action Pack and +`ActiveModel::Model` adds the ability for a class to work with Action Pack and Action View right out of the box. ```ruby @@ -293,7 +294,7 @@ objects. ### Serialization `ActiveModel::Serialization` provides basic serialization for your object. -You need to declare an attributes hash which contains the attributes you want to +You need to declare an attributes Hash which contains the attributes you want to serialize. Attributes must be strings, not symbols. ```ruby @@ -308,7 +309,7 @@ class Person end ``` -Now you can access a serialized hash of your object using the `serializable_hash`. +Now you can access a serialized Hash of your object using the `serializable_hash` method. ```ruby person = Person.new @@ -319,13 +320,14 @@ person.serializable_hash # => {"name"=>"Bob"} #### ActiveModel::Serializers -Rails provides an `ActiveModel::Serializers::JSON` serializer. -This module automatically include the `ActiveModel::Serialization`. +Active Model also provides the `ActiveModel::Serializers::JSON` module +for JSON serializing / deserializing. This module automatically includes the +previously discussed `ActiveModel::Serialization` module. ##### ActiveModel::Serializers::JSON -To use the `ActiveModel::Serializers::JSON` you only need to change from -`ActiveModel::Serialization` to `ActiveModel::Serializers::JSON`. +To use `ActiveModel::Serializers::JSON` you only need to change the +module you are including from `ActiveModel::Serialization` to `ActiveModel::Serializers::JSON`. ```ruby class Person @@ -339,7 +341,8 @@ class Person end ``` -With the `as_json` method you have a hash representing the model. +The `as_json` method, similar to `serializable_hash`, provides a Hash representing +the model. ```ruby person = Person.new @@ -348,8 +351,8 @@ person.name = "Bob" person.as_json # => {"name"=>"Bob"} ``` -From a JSON string you define the attributes of the model. -You need to have the `attributes=` method defined on your class: +You can also define the attributes for a model from a JSON string. +However, you need to define the `attributes=` method on your class: ```ruby class Person @@ -369,7 +372,7 @@ class Person end ``` -Now it is possible to create an instance of person and set the attributes using `from_json`. +Now it is possible to create an instance of `Person` and set attributes using `from_json`. ```ruby json = { name: 'Bob' }.to_json @@ -389,8 +392,8 @@ class Person end ``` -With the `human_attribute_name` you can transform attribute names into a more -human format. The human format is defined in your locale file. +With the `human_attribute_name` method, you can transform attribute names into a +more human-readable format. The human-readable format is defined in your locale file(s). * config/locales/app.pt-BR.yml @@ -411,7 +414,7 @@ Person.human_attribute_name('name') # => "Nome" `ActiveModel::Lint::Tests` allows you to test whether an object is compliant with the Active Model API. -* app/models/person.rb +* `app/models/person.rb` ```ruby class Person @@ -419,7 +422,7 @@ the Active Model API. end ``` -* test/models/person_test.rb +* `test/models/person_test.rb` ```ruby require 'test_helper' @@ -454,9 +457,9 @@ features out of the box. ### SecurePassword `ActiveModel::SecurePassword` provides a way to securely store any -password in an encrypted form. On including this module, a +password in an encrypted form. When you include this module, a `has_secure_password` class method is provided which defines -an accessor named `password` with certain validations on it. +a `password` accessor with certain validations on it. #### Requirements @@ -466,7 +469,7 @@ In order to make this work, the model must have an accessor named `password_dige The `has_secure_password` will add the following validations on the `password` accessor: 1. Password should be present. -2. Password should be equal to its confirmation (provided +password_confirmation+ is passed along). +2. Password should be equal to its confirmation (provided `password_confirmation` is passed along). 3. The maximum length of a password is 72 (required by `bcrypt` on which ActiveModel::SecurePassword depends) #### Examples diff --git a/guides/source/active_record_callbacks.md b/guides/source/active_record_callbacks.md index 77bd3c97e8..b1705855d0 100644 --- a/guides/source/active_record_callbacks.md +++ b/guides/source/active_record_callbacks.md @@ -117,6 +117,10 @@ Here is a list with all the available Active Record callbacks, listed in the sam WARNING. `after_save` runs both on create and update, but always _after_ the more specific callbacks `after_create` and `after_update`, no matter the order in which the macro calls were executed. +NOTE: `before_destroy` callbacks should be placed before `dependent: :destroy` +associations (or use the `prepend: true` option), to ensure they execute before +the records are deleted by `dependent: :destroy`. + ### `after_initialize` and `after_find` The `after_initialize` callback will be called whenever an Active Record object is instantiated, either by directly using `new` or when a record is loaded from the database. It can be useful to avoid the need to directly override your Active Record `initialize` method. @@ -254,7 +258,11 @@ Halting Execution As you start registering new callbacks for your models, they will be queued for execution. This queue will include all your model's validations, the registered callbacks, and the database operation to be executed. -The whole callback chain is wrapped in a transaction. If any _before_ callback method returns exactly `false` or raises an exception, the execution chain gets halted and a ROLLBACK is issued; _after_ callbacks can only accomplish that by raising an exception. +The whole callback chain is wrapped in a transaction. If any callback raises an exception, the execution chain gets halted and a ROLLBACK is issued. To intentionally stop a chain use: + +```ruby +throw :abort +``` WARNING. Any exception that is not `ActiveRecord::Rollback` or `ActiveRecord::RecordInvalid` will be re-raised by Rails after the callback chain is halted. Raising an exception other than `ActiveRecord::Rollback` or `ActiveRecord::RecordInvalid` may break code that does not expect methods like `save` and `update_attributes` (which normally try to return `true` or `false`) to raise an exception. diff --git a/guides/source/active_record_migrations.md b/guides/source/active_record_migrations.md index 6e7e29ed60..7fdb5901f3 100644 --- a/guides/source/active_record_migrations.md +++ b/guides/source/active_record_migrations.md @@ -972,11 +972,11 @@ on. Because this is database-independent, it could be loaded into any database that Active Record supports. This could be very useful if you were to distribute an application that is able to run against multiple databases. -There is however a trade-off: `db/schema.rb` cannot express database specific -items such as triggers, stored procedures or check constraints. While in a -migration you can execute custom SQL statements, the schema dumper cannot -reconstitute those statements from the database. If you are using features like -this, then you should set the schema format to `:sql`. +NOTE: `db/schema.rb` cannot express database specific items such as triggers, +sequences, stored procedures or check constraints, etc. Please note that while +custom SQL statements can be run in migrations, these statements cannot be reconstituted +by the schema dumper. If you are using features like this, then you +should set the schema format to `:sql`. Instead of using Active Record's schema dumper, the database's structure will be dumped using a tool specific to the database (via the `db:structure:dump` diff --git a/guides/source/active_record_querying.md b/guides/source/active_record_querying.md index 31220f9be2..26d01d4ede 100644 --- a/guides/source/active_record_querying.md +++ b/guides/source/active_record_querying.md @@ -953,9 +953,6 @@ class Client < ApplicationRecord end ``` -NOTE: Please note that the optimistic locking will be ignored if you update the -locking column's value. - ### Pessimistic Locking Pessimistic locking uses a locking mechanism provided by the underlying database. Using `lock` when building a relation obtains an exclusive lock on the selected rows. Relations using `lock` are usually wrapped inside a transaction for preventing deadlock conditions. @@ -1384,8 +1381,9 @@ class Client < ApplicationRecord end ``` -NOTE: The `default_scope` is also applied while creating/building a record. -It is not applied while updating a record. E.g.: +NOTE: The `default_scope` is also applied while creating/building a record +when the scope arguments are given as a `Hash`. It is not applied while +updating a record. E.g.: ```ruby class Client < ApplicationRecord @@ -1396,6 +1394,17 @@ Client.new # => #<Client id: nil, active: true> Client.unscoped.new # => #<Client id: nil, active: nil> ``` +Be aware that, when given in the `Array` format, `default_scope` query arguments +cannot be converted to a `Hash` for default attribute assignment. E.g.: + +```ruby +class Client < ApplicationRecord + default_scope { where("active = ?", true) } +end + +Client.new # => #<Client id: nil, active: nil> +``` + ### Merging of scopes Just like `where` clauses scopes are merged using `AND` conditions. @@ -1547,7 +1556,7 @@ SELECT people.id, people.name, comments.text FROM people INNER JOIN comments ON comments.person_id = people.id -WHERE comments.created_at = '2015-01-01' +WHERE comments.created_at > '2015-01-01' ``` ### Retrieving specific data from multiple tables @@ -1871,7 +1880,7 @@ Which will execute: ```sql SELECT count(DISTINCT clients.id) AS count_all FROM clients - LEFT OUTER JOIN orders ON orders.client_id = client.id WHERE + LEFT OUTER JOIN orders ON orders.client_id = clients.id WHERE (clients.first_name = 'Ryan' AND orders.status = 'received') ``` diff --git a/guides/source/active_record_validations.md b/guides/source/active_record_validations.md index 32b38cde5e..5313361dfd 100644 --- a/guides/source/active_record_validations.md +++ b/guides/source/active_record_validations.md @@ -490,9 +490,6 @@ If you set `:only_integer` to `true`, then it will use the regular expression to validate the attribute's value. Otherwise, it will try to convert the value to a number using `Float`. -WARNING. Note that the regular expression above allows a trailing newline -character. - ```ruby class Player < ApplicationRecord validates :points, numericality: true diff --git a/guides/source/api_documentation_guidelines.md b/guides/source/api_documentation_guidelines.md index 34b9c0d2ca..3c61754982 100644 --- a/guides/source/api_documentation_guidelines.md +++ b/guides/source/api_documentation_guidelines.md @@ -333,10 +333,6 @@ As a contributor, it's important to think about whether this API is meant for en A class or module is marked with `:nodoc:` to indicate that all methods are internal API and should never be used directly. -If you come across an existing `:nodoc:` you should tread lightly. Consider asking someone from the core team or author of the code before removing it. This should almost always happen through a pull request instead of the docrails project. - -A `:nodoc:` should never be added simply because a method or class is missing documentation. There may be an instance where an internal public method wasn't given a `:nodoc:` by mistake, for example when switching a method from private to public visibility. When this happens it should be discussed over a PR on a case-by-case basis and never committed directly to docrails. - To summarize, the Rails team uses `:nodoc:` to mark publicly visible methods and classes for internal use; changes to the visibility of API should be considered carefully and discussed over a pull request first. Regarding the Rails Stack diff --git a/guides/source/asset_pipeline.md b/guides/source/asset_pipeline.md index 68dde4482f..61b7112247 100644 --- a/guides/source/asset_pipeline.md +++ b/guides/source/asset_pipeline.md @@ -335,7 +335,7 @@ an asset has been updated and if so loads it into the page: <%= javascript_include_tag "application", "data-turbolinks-track" => "reload" %> ``` -In regular views you can access images in the `public/assets/images` directory +In regular views you can access images in the `app/assets/images` directory like this: ```erb diff --git a/guides/source/association_basics.md b/guides/source/association_basics.md index 6e68935f9b..5794bfa666 100644 --- a/guides/source/association_basics.md +++ b/guides/source/association_basics.md @@ -154,7 +154,7 @@ case, the column definition might look like this: ```ruby create_table :accounts do |t| - t.belongs_to :supplier, index: true, unique: true, foreign_key: true + t.belongs_to :supplier, index: { unique: true }, foreign_key: true # ... end ``` @@ -582,14 +582,30 @@ class CreateBooks < ActiveRecord::Migration[5.0] t.string :book_number t.integer :author_id end - - add_index :books, :author_id end end ``` If you create an association some time after you build the underlying model, you need to remember to create an `add_column` migration to provide the necessary foreign key. +It's a good practice to add an index on the foreign key to improve queries +performance and a foreign key constraint to ensure referential data integrity: + +```ruby +class CreateBooks < ActiveRecord::Migration[5.0] + def change + create_table :books do |t| + t.datetime :published_at + t.string :book_number + t.integer :author_id + end + + add_index :books, :author_id + add_foreign_key :books, :authors + end +end +``` + #### Creating Join Tables for `has_and_belongs_to_many` Associations If you create a `has_and_belongs_to_many` association, you need to explicitly create the joining table. Unless the name of the join table is explicitly specified by using the `:join_table` option, Active Record creates the name by using the lexical book of the class names. So a join between author and book models will give the default join table name of "authors_books" because "a" outranks "b" in lexical ordering. diff --git a/guides/source/caching_with_rails.md b/guides/source/caching_with_rails.md index fd7626250c..6cdce5c2f4 100644 --- a/guides/source/caching_with_rails.md +++ b/guides/source/caching_with_rails.md @@ -387,6 +387,11 @@ store is not appropriate for large application deployments. However, it can work well for small, low traffic sites with only a couple of server processes, as well as development and test environments. +New Rails projects are configured to use this implementation in development environment by default. + +NOTE: Since processes will not share cache data when using `:memory_store`, +it will not be possible to manually read, write or expire the cache via the Rails console. + ### ActiveSupport::Cache::FileStore This cache store uses the file system to store entries. The path to the directory where the store files will be stored must be specified when initializing the cache. @@ -396,14 +401,15 @@ config.cache_store = :file_store, "/path/to/cache/directory" ``` With this cache store, multiple server processes on the same host can share a -cache. The cache store is appropriate for low to medium traffic sites that are +cache. This cache store is appropriate for low to medium traffic sites that are served off one or two hosts. Server processes running on different hosts could share a cache by using a shared file system, but that setup is not recommended. As the cache will grow until the disk is full, it is recommended to periodically clear out old entries. -This is the default cache store implementation. +This is the default cache store implementation (at `"#{root}/tmp/cache/"`) if +no explicit `config.cache_store` is supplied. ### ActiveSupport::Cache::MemCacheStore @@ -570,6 +576,20 @@ You can also set the strong ETag directly on the response. response.strong_etag = response.body # => "618bbc92e2d35ea1945008b42799b0e7" ``` +Caching in Development +---------------------- + +It's common to want to test the caching strategy of your application +in development mode. Rails provides the rake task `dev:cache` to +easily toggle caching on/off. + +```bash +$ bin/rails dev:cache +Development mode is now being cached. +$ bin/rails dev:cache +Development mode is no longer being cached. +``` + References ---------- diff --git a/guides/source/command_line.md b/guides/source/command_line.md index c8d559745e..3360496c08 100644 --- a/guides/source/command_line.md +++ b/guides/source/command_line.md @@ -63,7 +63,7 @@ With no further work, `rails server` will run our new shiny Rails app: $ cd commandsapp $ bin/rails server => Booting Puma -=> Rails 5.0.0 application starting in development on http://0.0.0.0:3000 +=> Rails 5.1.0 application starting in development on http://0.0.0.0:3000 => Run `rails server -h` for more startup options Puma starting in single mode... * Version 3.0.2 (ruby 2.3.0-p0), codename: Plethora of Penguin Pinatas @@ -294,7 +294,7 @@ If you wish to test out some code without changing any data, you can do that by ```bash $ bin/rails console --sandbox -Loading development environment in sandbox (Rails 5.0.0) +Loading development environment in sandbox (Rails 5.1.0) Any modifications you make will be rolled back on exit irb(main):001:0> ``` @@ -428,12 +428,12 @@ INFO: You can also use `bin/rails -T` to get the list of tasks. ```bash $ bin/rails about About your application's environment -Rails version 5.0.0 +Rails version 5.1.0 Ruby version 2.2.2 (x86_64-linux) RubyGems version 2.4.6 -Rack version 1.6 +Rack version 2.0.1 JavaScript Runtime Node.js (V8) -Middleware Rack::Sendfile, ActionDispatch::Static, ActionDispatch::Executor, #<ActiveSupport::Cache::Strategy::LocalCache::Middleware:0x007ffd131a7c88>, Rack::Runtime, Rack::MethodOverride, ActionDispatch::RequestId, Rails::Rack::Logger, ActionDispatch::ShowExceptions, ActionDispatch::DebugExceptions, ActionDispatch::RemoteIp, ActionDispatch::Reloader, ActionDispatch::Callbacks, ActiveRecord::Migration::CheckPending, ActionDispatch::Cookies, ActionDispatch::Session::CookieStore, ActionDispatch::Flash, Rack::Head, Rack::ConditionalGet, Rack::ETag +Middleware: Rack::Sendfile, ActionDispatch::Static, ActionDispatch::Executor, ActiveSupport::Cache::Strategy::LocalCache::Middleware, Rack::Runtime, Rack::MethodOverride, ActionDispatch::RequestId, ActionDispatch::RemoteIp, Sprockets::Rails::QuietAssets, Rails::Rack::Logger, ActionDispatch::ShowExceptions, WebConsole::Middleware, ActionDispatch::DebugExceptions, ActionDispatch::Reloader, ActionDispatch::Callbacks, ActiveRecord::Migration::CheckPending, ActionDispatch::Cookies, ActionDispatch::Session::CookieStore, ActionDispatch::Flash, Rack::Head, Rack::ConditionalGet, Rack::ETag Application root /home/foobar/commandsapp Environment development Database adapter sqlite3 diff --git a/guides/source/configuring.md b/guides/source/configuring.md index de921e2705..bf9456a482 100644 --- a/guides/source/configuring.md +++ b/guides/source/configuring.md @@ -32,7 +32,7 @@ Configuring Rails Components In general, the work of configuring Rails means configuring the components of Rails, as well as configuring Rails itself. The configuration file `config/application.rb` and environment-specific configuration files (such as `config/environments/production.rb`) allow you to specify the various settings that you want to pass down to all of the components. -For example, the `config/application.rb` file includes this setting: +For example, you could add this setting to `config/application.rb` file: ```ruby config.time_zone = 'Central Time (US & Canada)' @@ -350,9 +350,9 @@ All these configuration options are delegated to the `I18n` library. `config/environments/production.rb` which is generated by Rails. The default value is `true` if this configuration is not set. -* `config.active_record.dump_schemas` controls which database schemas will be dumped when calling db:structure:dump. - The options are `:schema_search_path` (the default) which dumps any schemas listed in schema_search_path, - `:all` which always dumps all schemas regardless of the schema_search_path, +* `config.active_record.dump_schemas` controls which database schemas will be dumped when calling `db:structure:dump`. + The options are `:schema_search_path` (the default) which dumps any schemas listed in `schema_search_path`, + `:all` which always dumps all schemas regardless of the `schema_search_path`, or a string of comma separated schemas. * `config.active_record.belongs_to_required_by_default` is a boolean value and @@ -362,10 +362,10 @@ All these configuration options are delegated to the `I18n` library. * `config.active_record.warn_on_records_fetched_greater_than` allows setting a warning threshold for query result size. If the number of records returned by a query exceeds the threshold, a warning is logged. This can be used to - identify queries which might be causing memory bloat. + identify queries which might be causing a memory bloat. * `config.active_record.index_nested_attribute_errors` allows errors for nested - has_many relationships to be displayed with an index as well as the error. + `has_many` relationships to be displayed with an index as well as the error. Defaults to `false`. * `config.active_record.use_schema_cache_dump` enables users to get schema cache information @@ -543,6 +543,8 @@ encrypted cookies salt value. Defaults to `'signed encrypted cookie'`. * `config.action_view.debug_missing_translation` determines whether to wrap the missing translations key in a `<span>` tag or not. This defaults to `true`. +* `config.action_view.form_with_generates_remote_forms` determines whether `form_with` generates remote forms or not. This defaults to `true`. + ### Configuring Action Mailer There are a number of settings available on `config.action_mailer`: diff --git a/guides/source/contributing_to_ruby_on_rails.md b/guides/source/contributing_to_ruby_on_rails.md index fe5437ae5d..39f4272b3c 100644 --- a/guides/source/contributing_to_ruby_on_rails.md +++ b/guides/source/contributing_to_ruby_on_rails.md @@ -15,7 +15,7 @@ After reading this guide, you will know: Ruby on Rails is not "someone else's framework." Over the years, hundreds of people have contributed to Ruby on Rails ranging from a single character to massive architectural changes or significant documentation - all with the goal of making Ruby on Rails better for everyone. Even if you don't feel up to writing code or documentation yet, there are a variety of other ways that you can contribute, from reporting issues to testing patches. -As mentioned in [Rails +As mentioned in [Rails' README](https://github.com/rails/rails/blob/master/README.md), everyone interacting in Rails and its sub-projects' codebases, issue trackers, chat rooms, and mailing lists is expected to follow the Rails [code of conduct](http://rubyonrails.org/conduct/). -------------------------------------------------------------------------------- @@ -98,13 +98,13 @@ Anything you can do to make bug reports more succinct or easier to reproduce hel ### Testing Patches -You can also help out by examining pull requests that have been submitted to Ruby on Rails via GitHub. To apply someone's changes you need first to create a dedicated branch: +You can also help out by examining pull requests that have been submitted to Ruby on Rails via GitHub. In order to apply someone's changes, you need to first create a dedicated branch: ```bash $ git checkout -b testing_branch ``` -Then you can use their remote branch to update your codebase. For example, let's say the GitHub user JohnSmith has forked and pushed to a topic branch "orange" located at https://github.com/JohnSmith/rails. +Then, you can use their remote branch to update your codebase. For example, let's say the GitHub user JohnSmith has forked and pushed to a topic branch "orange" located at https://github.com/JohnSmith/rails. ```bash $ git remote add JohnSmith https://github.com/JohnSmith/rails.git @@ -132,24 +132,12 @@ learn about Ruby on Rails, and the API, which serves as a reference. You can help improve the Rails guides by making them more coherent, consistent or readable, adding missing information, correcting factual errors, fixing typos, or bringing them up to date with the latest edge Rails. -You can either open a pull request to [Rails](https://github.com/rails/rails) or -ask the [Rails core team](http://rubyonrails.org/community/#core) for commit access on -docrails if you contribute regularly. -Please do not open pull requests in docrails, if you'd like to get feedback on your -change, ask for it in [Rails](https://github.com/rails/rails) instead. - -Docrails is merged with master regularly, so you are effectively editing the Ruby on Rails documentation. - -If you are unsure of the documentation changes, you can create an issue in the [Rails](https://github.com/rails/rails/issues) issues tracker on GitHub. +To do so, open a pull request to [Rails](https://github.com/rails/rails) on GitHub. When working with documentation, please take into account the [API Documentation Guidelines](api_documentation_guidelines.html) and the [Ruby on Rails Guides Guidelines](ruby_on_rails_guides_guidelines.html). -NOTE: As explained earlier, ordinary code patches should have proper documentation coverage. Docrails is only used for isolated documentation improvements. - NOTE: To help our CI servers you should add [ci skip] to your documentation commit message to skip build on that commit. Please remember to use it for commits containing only documentation changes. -WARNING: Docrails has a very strict policy: no code can be touched whatsoever, no matter how trivial or small the change. Only RDoc and guides can be edited via docrails. Also, CHANGELOGs should never be edited in docrails. - Translating Rails Guides ------------------------ @@ -418,16 +406,6 @@ examples or multiple paragraphs. Otherwise, it's best to make a new paragraph. Some changes require the dependencies to be upgraded. In these cases make sure you run `bundle update` to get the right version of the dependency and commit the `Gemfile.lock` file within your changes. -### Sanity Check - -You should not be the only person who looks at the code before you submit it. -If you know someone else who uses Rails, try asking them if they'll check out -your work. If you don't know anyone else using Rails, try hopping into the IRC -room or posting about your idea to the rails-core mailing list. Doing this in -private before you push a patch out publicly is the "smoke test" for a patch: -if you can't convince one other developer of the beauty of your code, you’re -unlikely to convince the core team either. - ### Commit Your Changes When you're happy with the code on your computer, you need to commit the changes to Git: @@ -685,4 +663,4 @@ And then... think about your next contribution! Rails Contributors ------------------ -All contributions, either via master or docrails, get credit in [Rails Contributors](http://contributors.rubyonrails.org). +All contributions get credit in [Rails Contributors](http://contributors.rubyonrails.org). diff --git a/guides/source/debugging_rails_applications.md b/guides/source/debugging_rails_applications.md index ba0cdbf3af..58aab774b3 100644 --- a/guides/source/debugging_rails_applications.md +++ b/guides/source/debugging_rails_applications.md @@ -313,7 +313,7 @@ For example: ```bash => Booting Puma -=> Rails 5.0.0 application starting in development on http://0.0.0.0:3000 +=> Rails 5.1.0 application starting in development on http://0.0.0.0:3000 => Run `rails server -h` for more startup options Puma starting in single mode... * Version 3.4.0 (ruby 2.3.1-p112), codename: Owl Bowl Brawl @@ -445,11 +445,11 @@ then `backtrace` will supply the answer. --> #0 ArticlesController.index at /PathToProject/app/controllers/articles_controller.rb:8 #1 ActionController::BasicImplicitRender.send_action(method#String, *args#Array) - at /PathToGems/actionpack-5.0.0/lib/action_controller/metal/basic_implicit_render.rb:4 + at /PathToGems/actionpack-5.1.0/lib/action_controller/metal/basic_implicit_render.rb:4 #2 AbstractController::Base.process_action(action#NilClass, *args#Array) - at /PathToGems/actionpack-5.0.0/lib/abstract_controller/base.rb:181 + at /PathToGems/actionpack-5.1.0/lib/abstract_controller/base.rb:181 #3 ActionController::Rendering.process_action(action, *args) - at /PathToGems/actionpack-5.0.0/lib/action_controller/metal/rendering.rb:30 + at /PathToGems/actionpack-5.1.0/lib/action_controller/metal/rendering.rb:30 ... ``` @@ -461,7 +461,7 @@ context. ``` (byebug) frame 2 -[176, 185] in /PathToGems/actionpack-5.0.0/lib/abstract_controller/base.rb +[176, 185] in /PathToGems/actionpack-5.1.0/lib/abstract_controller/base.rb 176: # is the intended way to override action dispatching. 177: # 178: # Notice that the first argument is the method to be dispatched @@ -606,7 +606,6 @@ You can also inspect for an object method this way: @new_record = true @readonly = false @transaction_state = nil -@txn = nil ``` You can also use `display` to start watching variables. This is a good way of @@ -677,7 +676,7 @@ Ruby instruction to be executed -- in this case, Active Support's `week` method. ``` (byebug) step -[49, 58] in /PathToGems/activesupport-5.0.0/lib/active_support/core_ext/numeric/time.rb +[49, 58] in /PathToGems/activesupport-5.1.0/lib/active_support/core_ext/numeric/time.rb 49: 50: # Returns a Duration instance matching the number of weeks provided. 51: # diff --git a/guides/source/documents.yaml b/guides/source/documents.yaml index 2925fb4b58..2afef57fc2 100644 --- a/guides/source/documents.yaml +++ b/guides/source/documents.yaml @@ -194,6 +194,10 @@ url: upgrading_ruby_on_rails.html description: This guide helps in upgrading applications to latest Ruby on Rails versions. - + name: Ruby on Rails 5.1 Release Notes + url: 5_1_release_notes.html + description: Release notes for Rails 5.1. + - name: Ruby on Rails 5.0 Release Notes url: 5_0_release_notes.html description: Release notes for Rails 5.0. diff --git a/guides/source/engines.md b/guides/source/engines.md index 180a786237..2276f348a1 100644 --- a/guides/source/engines.md +++ b/guides/source/engines.md @@ -14,6 +14,7 @@ After reading this guide, you will know: * How to build features for the engine. * How to hook the engine into an application. * How to override engine functionality in the application. +* Avoid loading Rails frameworks with Load and Configuration Hooks -------------------------------------------------------------------------------- @@ -1410,3 +1411,114 @@ module MyEngine end end ``` + +Active Support On Load Hooks +---------------------------- + +Active Support is the Ruby on Rails component responsible for providing Ruby language extensions, utilities, and other transversal utilities. + +Rails code can often be referenced on load of an application. Rails is responsible for the load order of these frameworks, so when you load frameworks, such as `ActiveRecord::Base`, prematurely you are violating an implicit contract your application has with Rails. Moreover, by loading code such as `ActiveRecord::Base` on boot of your application you are loading entire frameworks which may slow down your boot time and could cause conflicts with load order and boot of your application. + +On Load hooks are the API that allow you to hook into this initialization process without violating the load contract with Rails. This will also mitigate boot performance degradation and avoid conflicts. + +## What are `on_load` hooks? + +Since Ruby is a dynamic language, some code will cause different Rails frameworks to load. Take this snippet for instance: + +```ruby +ActiveRecord::Base.include(MyActiveRecordHelper) +``` + +This snippet means that when this file is loaded, it will encounter `ActiveRecord::Base`. This encounter causes Ruby to look for the definition of that constant and will require it. This causes the entire Active Record framework to be loaded on boot. + +`ActiveSupport.on_load` is a mechanism that can be used to defer the loading of code until it is actually needed. The snippet above can be changed to: + +```ruby +ActiveSupport.on_load(:active_record) { include MyActiveRecordHelper } +``` + +This new snippet will only include `MyActiveRecordHelper` when `ActiveRecord::Base` is loaded. + +## How does it work? + +In the Rails framework these hooks are called when a specific library is loaded. For example, when `ActionController::Base` is loaded, the `:action_controller_base` hook is called. This means that all `ActiveSupport.on_load` calls with `:action_controller_base` hooks will be called in the context of `ActionController::Base` (that means `self` will be an `ActionController::Base`). + +## Modifying code to use `on_load` hooks + +Modifying code is generally straightforward. If you have a line of code that refers to a Rails framework such as `ActiveRecord::Base` you can wrap that code in an `on_load` hook. + +### Example 1 + +```ruby +ActiveRecord::Base.include(MyActiveRecordHelper) +``` + +becomes + +```ruby +ActiveSupport.on_load(:active_record) { include MyActiveRecordHelper } # self refers to ActiveRecord::Base here, so we can simply #include +``` + +### Example 2 + +```ruby +ActionController::Base.prepend(MyActionControllerHelper) +``` + +becomes + +```ruby +ActiveSupport.on_load(:action_controller_base) { prepend MyActionControllerHelper } # self refers to ActionController::Base here, so we can simply #prepend +``` + +### Example 3 + +```ruby +ActiveRecord::Base.include_root_in_json = true +``` + +becomes + +```ruby +ActiveSupport.on_load(:active_record) { self.include_root_in_json = true } # self refers to ActiveRecord::Base here +``` + +## Available Hooks + +These are the hooks you can use in your own code. + +To hook into the initialization process of one of the following classes use the available hook. + +| Class | Available Hooks | +| --------------------------------- | ------------------------------------ | +| `ActionCable` | `action_cable` | +| `ActionController::API` | `action_controller_api` | +| `ActionController::API` | `action_controller` | +| `ActionController::Base` | `action_controller_base` | +| `ActionController::Base` | `action_controller` | +| `ActionController::TestCase` | `action_controller_test_case` | +| `ActionDispatch::IntegrationTest` | `action_dispatch_integration_test` | +| `ActionMailer::Base` | `action_mailer` | +| `ActionMailer::TestCase` | `action_mailer_test_case` | +| `ActionView::Base` | `action_view` | +| `ActionView::TestCase` | `action_view_test_case` | +| `ActiveJob::Base` | `active_job` | +| `ActiveJob::TestCase` | `active_job_test_case` | +| `ActiveRecord::Base` | `active_record` | +| `ActiveSupport::TestCase` | `active_support_test_case` | +| `i18n` | `i18n` | + +## Configuration hooks + +These are the available configuration hooks. They do not hook into any particular framework, instead they run in context of the entire application. + +| Hook | Use Case | +| ---------------------- | ------------------------------------------------------------------------------------- | +| `before_configuration` | First configurable block to run. Called before any initializers are run. | +| `before_initialize` | Second configurable block to run. Called before frameworks initialize. | +| `before_eager_load` | Third configurable block to run. Does not run if `config.cache_classes` set to false. | +| `after_initialize` | Last configurable block to run. Called after frameworks initialize. | + +### Example + +`config.before_configuration { puts 'I am called before any initializers' }` diff --git a/guides/source/form_helpers.md b/guides/source/form_helpers.md index 8ad76ad01e..f46f1648b3 100644 --- a/guides/source/form_helpers.md +++ b/guides/source/form_helpers.md @@ -164,7 +164,7 @@ make it easier for users to click the inputs. Other form controls worth mentioning are textareas, password fields, hidden fields, search fields, telephone fields, date fields, time fields, -color fields, datetime fields, datetime-local fields, month fields, week fields, +color fields, datetime-local fields, month fields, week fields, URL fields, email fields, number fields and range fields: ```erb @@ -531,7 +531,7 @@ To leverage time zone support in Rails, you have to ask your users what time zon <%= time_zone_select(:person, :time_zone) %> ``` -There is also `time_zone_options_for_select` helper for a more manual (therefore more customizable) way of doing this. Read the API documentation to learn about the possible arguments for these two methods. +There is also `time_zone_options_for_select` helper for a more manual (therefore more customizable) way of doing this. Read the [API documentation](http://api.rubyonrails.org/classes/ActionView/Helpers/FormOptionsHelper.html#method-i-time_zone_options_for_select) to learn about the possible arguments for these two methods. Rails _used_ to have a `country_select` helper for choosing countries, but this has been extracted to the [country_select plugin](https://github.com/stefanpenner/country_select). When using this, be aware that the exclusion or inclusion of certain names from the list can be somewhat controversial (and was the reason this functionality was extracted from Rails). @@ -877,7 +877,7 @@ Active Record provides model level support via the `accepts_nested_attributes_fo ```ruby class Person < ApplicationRecord - has_many :addresses + has_many :addresses, inverse_of: :person accepts_nested_attributes_for :addresses end diff --git a/guides/source/generators.md b/guides/source/generators.md index d0b6cef3fd..a554e08204 100644 --- a/guides/source/generators.md +++ b/guides/source/generators.md @@ -426,7 +426,7 @@ Fallbacks allow your generators to have a single responsibility, increasing code Application Templates --------------------- -Now that you've seen how generators can be used _inside_ an application, did you know they can also be used to _generate_ applications too? This kind of generator is referred as a "template". This is a brief overview of the Templates API. For detailed documentation see the [Rails Application Templates guide](rails_application_templates.html). +Now that you've seen how generators can be used _inside_ an application, did you know they can also be used to _generate_ applications too? This kind of generator is referred to as a "template". This is a brief overview of the Templates API. For detailed documentation see the [Rails Application Templates guide](rails_application_templates.html). ```ruby gem "rspec-rails", group: "test" diff --git a/guides/source/getting_started.md b/guides/source/getting_started.md index 57b8472462..f3ae5a5b28 100644 --- a/guides/source/getting_started.md +++ b/guides/source/getting_started.md @@ -46,7 +46,7 @@ development with Rails. What is Rails? -------------- -Rails is a web application development framework written in the Ruby language. +Rails is a web application development framework written in the Ruby programming language. It is designed to make programming web applications easier by making assumptions about what every developer needs to get started. It allows you to write less code while accomplishing more than many other languages and frameworks. @@ -127,7 +127,7 @@ run the following: $ rails --version ``` -If it says something like "Rails 5.0.0", you are ready to continue. +If it says something like "Rails 5.1.0", you are ready to continue. ### Creating the Blog Application @@ -182,7 +182,7 @@ of the files and folders that Rails created by default: |test/|Unit tests, fixtures, and other test apparatus. These are covered in [Testing Rails Applications](testing.html).| |tmp/|Temporary files (like cache and pid files).| |vendor/|A place for all third-party code. In a typical Rails application this includes vendored gems.| -|.gitignore|This file tells git which files (or patterns) it should ignore. See [Github - Ignoring files](https://help.github.com/articles/ignoring-files) for more info about ignoring files. +|.gitignore|This file tells git which files (or patterns) it should ignore. See [GitHub - Ignoring files](https://help.github.com/articles/ignoring-files) for more info about ignoring files. Hello, Rails! ------------- diff --git a/guides/source/maintenance_policy.md b/guides/source/maintenance_policy.md index 7ced3eab1c..1d6a4edb5b 100644 --- a/guides/source/maintenance_policy.md +++ b/guides/source/maintenance_policy.md @@ -44,7 +44,7 @@ from. In special situations, where someone from the Core Team agrees to support more series, they are included in the list of supported series. -**Currently included series:** `5.0.Z`, `4.2.Z`. +**Currently included series:** `5.1.Z`. Security Issues --------------- @@ -59,7 +59,7 @@ be built from 1.2.2, and then added to the end of 1-2-stable. This means that security releases are easy to upgrade to if you're running the latest version of Rails. -**Currently included series:** `5.0.Z`, `4.2.Z`. +**Currently included series:** `5.1.Z`, `5.0.Z`. Severe Security Issues ---------------------- @@ -68,7 +68,7 @@ For severe security issues we will provide new versions as above, and also the last major release series will receive patches and new versions. The classification of the security issue is judged by the core team. -**Currently included series:** `5.0.Z`, `4.2.Z`. +**Currently included series:** `5.1.Z`, `5.0.Z`, `4.2.Z`. Unsupported Release Series -------------------------- diff --git a/guides/source/rails_on_rack.md b/guides/source/rails_on_rack.md index 340933c7ee..f25b185fb5 100644 --- a/guides/source/rails_on_rack.md +++ b/guides/source/rails_on_rack.md @@ -20,9 +20,9 @@ Introduction to Rack Rack provides a minimal, modular and adaptable interface for developing web applications in Ruby. By wrapping HTTP requests and responses in the simplest way possible, it unifies and distills the API for web servers, web frameworks, and software in between (the so-called middleware) into a single method call. -* [Rack API Documentation](http://rack.github.io/) - -Explaining Rack is not really in the scope of this guide. In case you are not familiar with Rack's basics, you should check out the [Resources](#resources) section below. +Explaining how Rack works is not really in the scope of this guide. In case you +are not familiar with Rack's basics, you should check out the [Resources](#resources) +section below. Rails on Rack ------------- @@ -74,7 +74,7 @@ And start the server: $ rackup config.ru ``` -To find out more about different `rackup` options: +To find out more about different `rackup` options, you can run: ```bash $ rackup --help @@ -89,7 +89,8 @@ Action Dispatcher Middleware Stack Many of Action Dispatcher's internal components are implemented as Rack middlewares. `Rails::Application` uses `ActionDispatch::MiddlewareStack` to combine various internal and external middlewares to form a complete Rails Rack application. -NOTE: `ActionDispatch::MiddlewareStack` is Rails equivalent of `Rack::Builder`, but built for better flexibility and more features to meet Rails' requirements. +NOTE: `ActionDispatch::MiddlewareStack` is Rails' equivalent of `Rack::Builder`, +but is built for better flexibility and more features to meet Rails' requirements. ### Inspecting Middleware Stack diff --git a/guides/source/routing.md b/guides/source/routing.md index 86492a9332..f7dbbc510e 100644 --- a/guides/source/routing.md +++ b/guides/source/routing.md @@ -142,16 +142,17 @@ Sometimes, you have a resource that clients always look up without referencing a get 'profile', to: 'users#show' ``` -Passing a `String` to `get` will expect a `controller#action` format, while passing a `Symbol` will map directly to an action but you must also specify the `controller:` to use: +Passing a `String` to `to:` will expect a `controller#action` format. When using a `Symbol`, the `to:` option should be replaced with `action:`. When using a `String` without a `#`, the `to:` option should be replaced with `controller:`: ```ruby -get 'profile', to: :show, controller: 'users' +get 'profile', action: :show, controller: 'users' ``` This resourceful route: ```ruby resource :geocoder +resolve('Geocoder') { [:geocoder] } ``` creates six different routes in your application, all mapping to the `Geocoders` controller: @@ -175,14 +176,6 @@ A singular resourceful route generates these helpers: As with plural resources, the same helpers ending in `_url` will also include the host, port and path prefix. -WARNING: A [long-standing bug](https://github.com/rails/rails/issues/1769) prevents `form_for` from working automatically with singular resources. As a workaround, specify the URL for the form directly, like so: - -```ruby -form_for @geocoder, url: geocoder_path do |f| - -# snippet for brevity -``` - ### Controller Namespaces and Routing You may wish to organize groups of controllers under a namespace. Most commonly, you might group a number of administrative controllers under an `Admin::` namespace. You would place these controllers under the `app/controllers/admin` directory, and you can group them together in your router: @@ -545,7 +538,7 @@ TIP: If you find yourself adding many extra actions to a resourceful route, it's Non-Resourceful Routes ---------------------- -In addition to resource routing, Rails has powerful support for routing arbitrary URLs to actions. Here, you don't get groups of routes automatically generated by resourceful routing. Instead, you set up each route within your application separately. +In addition to resource routing, Rails has powerful support for routing arbitrary URLs to actions. Here, you don't get groups of routes automatically generated by resourceful routing. Instead, you set up each route separately within your application. While you should usually use resourceful routing, there are still many places where the simpler routing is more appropriate. There's no need to try to shoehorn every last piece of your application into a resourceful framework if that's not a good fit. diff --git a/guides/source/security.md b/guides/source/security.md index a81a782cf2..c305350243 100644 --- a/guides/source/security.md +++ b/guides/source/security.md @@ -212,7 +212,7 @@ CSRF appears very rarely in CVE (Common Vulnerabilities and Exposures) - less th NOTE: _First, as is required by the W3C, use GET and POST appropriately. Secondly, a security token in non-GET requests will protect your application from CSRF._ -The HTTP protocol basically provides two main types of requests - GET and POST (and more, but they are not supported by most browsers). The World Wide Web Consortium (W3C) provides a checklist for choosing HTTP GET or POST: +The HTTP protocol basically provides two main types of requests - GET and POST (DELETE, PUT, and PATCH should be used like POST). The World Wide Web Consortium (W3C) provides a checklist for choosing HTTP GET or POST: **Use GET if:** @@ -224,7 +224,7 @@ The HTTP protocol basically provides two main types of requests - GET and POST ( * The interaction _changes the state_ of the resource in a way that the user would perceive (e.g., a subscription to a service), or * The user is _held accountable for the results_ of the interaction. -If your web application is RESTful, you might be used to additional HTTP verbs, such as PATCH, PUT or DELETE. Most of today's web browsers, however, do not support them - only GET and POST. Rails uses a hidden `_method` field to handle this barrier. +If your web application is RESTful, you might be used to additional HTTP verbs, such as PATCH, PUT or DELETE. Some legacy web browsers, however, do not support them - only GET and POST. Rails uses a hidden `_method` field to handle these cases. _POST requests can be sent automatically, too_. In this example, the link www.harmless.com is shown as the destination in the browser's status bar. But it has actually dynamically created a new form that sends a POST request. @@ -257,13 +257,12 @@ protect_from_forgery with: :exception This will automatically include a security token in all forms and Ajax requests generated by Rails. If the security token doesn't match what was expected, an exception will be thrown. -NOTE: By default, Rails includes jQuery and an [unobtrusive scripting adapter for -jQuery](https://github.com/rails/jquery-ujs), which adds a header called -`X-CSRF-Token` on every non-GET Ajax call made by jQuery with the security token. -Without this header, non-GET Ajax requests won't be accepted by Rails. When using -another library to make Ajax calls, it is necessary to add the security token as -a default header for Ajax calls in your library. To get the token, have a look at -`<meta name='csrf-token' content='THE-TOKEN'>` tag printed by +NOTE: By default, Rails includes an [unobtrusive scripting adapter](https://github.com/rails/rails/blob/master/actionview/app/assets/javascripts), +which adds a header called `X-CSRF-Token` with the security token on every non-GET +Ajax call. Without this header, non-GET Ajax requests won't be accepted by Rails. +When using another library to make Ajax calls, it is necessary to add the security +token as a default header for Ajax calls in your library. To get the token, have +a look at `<meta name='csrf-token' content='THE-TOKEN'>` tag printed by `<%= csrf_meta_tags %>` in your application view. It is common to use persistent cookies to store user information, with `cookies.permanent` for example. In this case, the cookies will not be cleared and the out of the box CSRF protection will not be effective. If you are using a different cookie store than the session for this information, you must handle what to do with it yourself: @@ -615,7 +614,7 @@ The two dashes start a comment ignoring everything after it. So the query return Usually a web application includes access control. The user enters their login credentials and the web application tries to find the matching record in the users table. The application grants access when it finds a record. However, an attacker may possibly bypass this check with SQL injection. The following shows a typical database query in Rails to find the first record in the users table which matches the login credentials parameters supplied by the user. ```ruby -User.first("login = '#{params[:name]}' AND password = '#{params[:password]}'") +User.find_by("login = '#{params[:name]}' AND password = '#{params[:password]}'") ``` If an attacker enters ' OR '1'='1 as the name, and ' OR '2'>'1 as the password, the resulting SQL query will be: @@ -762,7 +761,7 @@ s = sanitize(user_input, tags: tags, attributes: %w(href title)) This allows only the given tags and does a good job, even against all kinds of tricks and malformed tags. -As a second step, _it is good practice to escape all output of the application_, especially when re-displaying user input, which hasn't been input-filtered (as in the search form example earlier on). _Use `escapeHTML()` (or its alias `h()`) method_ to replace the HTML input characters &, ", <, and > by their uninterpreted representations in HTML (`&`, `"`, `<`, and `>`). +As a second step, _it is good practice to escape all output of the application_, especially when re-displaying user input, which hasn't been input-filtered (as in the search form example earlier on). _Use `escapeHTML()` (or its alias `h()`) method_ to replace the HTML input characters &, ", <, and > by their uninterpreted representations in HTML (`&`, `"`, `<`, and `>`). ##### Obfuscation and Encoding Injection diff --git a/guides/source/testing.md b/guides/source/testing.md index 652030a733..71fb6fb0e8 100644 --- a/guides/source/testing.md +++ b/guides/source/testing.md @@ -123,7 +123,7 @@ def test_the_truth end ``` -However only the `test` macro allows a more readable test name. You can still use regular method definitions though. +Although you can still use regular method definitions, using the `test` macro allows for a more readable test name. NOTE: The method name is generated by replacing spaces with underscores. The result does not need to be a valid Ruby identifier though, the name may contain punctuation characters etc. That's because in Ruby technically any string may be a method name. This may require use of `define_method` and `send` calls to function properly, but formally there's little restriction on the name. @@ -350,7 +350,7 @@ Rails adds some custom assertions of its own to the `minitest` framework: | --------------------------------------------------------------------------------- | ------- | | [`assert_difference(expressions, difference = 1, message = nil) {...}`](http://api.rubyonrails.org/classes/ActiveSupport/Testing/Assertions.html#method-i-assert_difference) | Test numeric difference between the return value of an expression as a result of what is evaluated in the yielded block.| | [`assert_no_difference(expressions, message = nil, &block)`](http://api.rubyonrails.org/classes/ActiveSupport/Testing/Assertions.html#method-i-assert_no_difference) | Asserts that the numeric result of evaluating an expression is not changed before and after invoking the passed in block.| -| [`assert_nothing_raised { block }`](http://api.rubyonrails.org/classes/ActiveSupport/TestCase.html#method-i-assert_nothing_raised) | Ensures that the given block doesn't raise any exceptions.| +| [`assert_nothing_raised { block }`](http://api.rubyonrails.org/classes/ActiveSupport/Testing/Assertions.html#method-i-assert_nothing_raised) | Ensures that the given block doesn't raise any exceptions.| | [`assert_recognizes(expected_options, path, extras={}, message=nil)`](http://api.rubyonrails.org/classes/ActionDispatch/Assertions/RoutingAssertions.html#method-i-assert_recognizes) | Asserts that the routing of the given path was handled correctly and that the parsed options (given in the expected_options hash) match path. Basically, it asserts that Rails recognizes the route given by expected_options.| | [`assert_generates(expected_path, options, defaults={}, extras = {}, message=nil)`](http://api.rubyonrails.org/classes/ActionDispatch/Assertions/RoutingAssertions.html#method-i-assert_generates) | Asserts that the provided options can be used to generate the provided path. This is the inverse of assert_recognizes. The extras parameter is used to tell the request the names and values of additional request parameters that would be in a query string. The message parameter allows you to specify a custom error message for assertion failures.| | [`assert_response(type, message = nil)`](http://api.rubyonrails.org/classes/ActionDispatch/Assertions/ResponseAssertions.html#method-i-assert_response) | Asserts that the response comes with a specific status code. You can specify `:success` to indicate 200-299, `:redirect` to indicate 300-399, `:missing` to indicate 404, or `:error` to match the 500-599 range. You can also pass an explicit status number or its symbolic equivalent. For more information, see [full list of status codes](http://rubydoc.info/github/rack/rack/master/Rack/Utils#HTTP_STATUS_CODES-constant) and how their [mapping](http://rubydoc.info/github/rack/rack/master/Rack/Utils#SYMBOL_TO_STATUS_CODE-constant) works.| @@ -610,9 +610,9 @@ For creating Rails system tests, you use the `test/system` directory in your application. Rails provides a generator to create a system test skeleton for you. ```bash -$ bin/rails generate system_test users_create_test +$ bin/rails generate system_test users_create invoke test_unit - create test/system/users_create_test.rb + create test/system/users_creates_test.rb ``` Here's what a freshly-generated system test looks like: @@ -620,10 +620,12 @@ Here's what a freshly-generated system test looks like: ```ruby require "application_system_test_case" -class UsersCreateTest < ApplicationSystemTestCase - visit users_url - - assert_selector "h1", text: "Users" +class UsersCreatesTest < ApplicationSystemTestCase + # test "visiting the index" do + # visit users_creates_url + # + # assert_selector "h1", text: "UsersCreate" + # end end ``` @@ -642,7 +644,7 @@ system tests should live. If you want to change the default settings you can simply change what the system tests are "driven by". Say you want to change the driver from Selenium to -Poltergeist. First add the Poltergeist gem to your Gemfile. Then in your +Poltergeist. First add the `poltergeist` gem to your Gemfile. Then in your `application_system_test_case.rb` file do the following: ```ruby @@ -656,8 +658,8 @@ end The driver name is a required argument for `driven_by`. The optional arguments that can be passed to `driven_by` are `:using` for the browser (this will only -be used for non-headless drivers like Selenium), `:on` for the port Puma should -use, and `:screen_size` to change the size of the screen for screenshots. +be used for non-headless drivers like Selenium), and `:screen_size` to change +the size of the screen for screenshots. ```ruby require "test_helper" @@ -720,7 +722,7 @@ class ArticlesTest < ApplicationSystemTestCase end ``` -The test should see that there is an h1 on the articles index and pass. +The test should see that there is an `h1` on the articles index page and pass. Run the system tests. @@ -728,6 +730,9 @@ Run the system tests. bin/rails test:system ``` +NOTE: By default, running `bin/rails test` won't run your system tests. +Make sure to run `bin/rails test:system` to actually run them. + #### Creating articles system test Now let's test the flow for creating a new article in our blog. @@ -758,7 +763,7 @@ text. Once the fields are filled in, "Create Article" is clicked on which will send a POST request to create the new article in the database. We will be redirected back to the the articles index page and there we assert -that the text from the article title is on the articles index page. +that the text from the new article's title is on the articles index page. #### Taking it further @@ -1435,6 +1440,10 @@ variable. We then ensure that it was sent (the first assert), then, in the second batch of assertions, we ensure that the email does indeed contain what we expect. The helper `read_fixture` is used to read in the content from this file. +NOTE: `email.body.to_s` is present when there's only one (HTML or text) part present. +If the mailer provides both, you can test your fixture against specific parts +with `email.text_part.body.to_s` or `email.html_part.body.to_s`. + Here's the content of the `invite` fixture: ``` @@ -1473,7 +1482,7 @@ class UserControllerTest < ActionDispatch::IntegrationTest assert_equal "You have been invited by me@example.com", invite_email.subject assert_equal 'friend@example.com', invite_email.to[0] - assert_match(/Hi friend@example.com/, invite_email.body.to_s) + assert_match(/Hi friend@example\.com/, invite_email.body.to_s) end end ``` diff --git a/guides/source/upgrading_ruby_on_rails.md b/guides/source/upgrading_ruby_on_rails.md index 6005298127..93864db141 100644 --- a/guides/source/upgrading_ruby_on_rails.md +++ b/guides/source/upgrading_ruby_on_rails.md @@ -73,16 +73,32 @@ For more information on changes made to Rails 5.1 please see the [release notes] ### Top-level `HashWithIndifferentAccess` is soft-deprecated If your application uses the the top-level `HashWithIndifferentAccess` class, you -should slowly move your code to use the `ActiveSupport::HashWithIndifferentAccess` -one. +should slowly move your code to instead use `ActiveSupport::HashWithIndifferentAccess`. It is only soft-deprecated, which means that your code will not break at the -moment and no deprecation warning will be displayed but this constant will be +moment and no deprecation warning will be displayed, but this constant will be removed in the future. -Also, if you have pretty old YAML documents containg dumps of such objects, +Also, if you have pretty old YAML documents containing dumps of such objects, you may need to load and dump them again to make sure that they reference -the right constant and that loading them won't break in the future. +the right constant, and that loading them won't break in the future. + +### `application.secrets` now loaded with all keys as symbols + +If your application stores nested configuration in `config/secrets.yml`, all keys +are now loaded as symbols, so access using strings should be changed. + +From: + +```ruby +Rails.application.secrets[:smtp_settings]["address"] +``` + +To: + +```ruby +Rails.application.secrets[:smtp_settings][:address] +``` Upgrading from Rails 4.2 to Rails 5.0 ------------------------------------- diff --git a/guides/source/working_with_javascript_in_rails.md b/guides/source/working_with_javascript_in_rails.md index c1dfcab6f3..047aeae37d 100644 --- a/guides/source/working_with_javascript_in_rails.md +++ b/guides/source/working_with_javascript_in_rails.md @@ -141,6 +141,8 @@ follow this pattern. Built-in Helpers ---------------------- +### Remote elements + Rails provides a bunch of view helper methods written in Ruby to assist you in generating HTML. Sometimes, you want to add a little Ajax to those elements, and Rails has got your back in those cases. @@ -149,18 +151,22 @@ Because of Unobtrusive JavaScript, the Rails "Ajax helpers" are actually in two parts: the JavaScript half and the Ruby half. Unless you have disabled the Asset Pipeline, -[rails.js](https://github.com/rails/jquery-ujs/blob/master/src/rails.js) +[rails-ujs](https://github.com/rails/rails/blob/master/actionview/app/assets/javascripts/rails-ujs.coffee) provides the JavaScript half, and the regular Ruby view helpers add appropriate tags to your DOM. -### form_for +You can read below about the different events that are fired dealing with +remote elements inside your application. + +#### form_with -[`form_for`](http://api.rubyonrails.org/classes/ActionView/Helpers/FormHelper.html#method-i-form_for) -is a helper that assists with writing forms. `form_for` takes a `:remote` -option. It works like this: +[`form_with`](http://api.rubyonrails.org/classes/ActionView/Helpers/FormHelper.html#method-i-form_with) +is a helper that assists with writing forms. By default, `form_with` assumes that +your form will be using Ajax. You can opt out of this behavior by +passing the `:local` option `form_with`. ```erb -<%= form_for(@article, remote: true) do |f| %> +<%= form_with(model: @article) do |f| %> ... <% end %> ``` @@ -168,7 +174,7 @@ option. It works like this: This will generate the following HTML: ```html -<form accept-charset="UTF-8" action="/articles" class="new_article" data-remote="true" id="new_article" method="post"> +<form action="/articles" method="post" data-remote="true"> ... </form> ``` @@ -189,32 +195,9 @@ $(document).ready -> ``` Obviously, you'll want to be a bit more sophisticated than that, but it's a -start. You can see more about the events [in the jquery-ujs wiki](https://github.com/rails/jquery-ujs/wiki/ajax). - -### form_tag - -[`form_tag`](http://api.rubyonrails.org/classes/ActionView/Helpers/FormTagHelper.html#method-i-form_tag) -is very similar to `form_for`. It has a `:remote` option that you can use like -this: - -```erb -<%= form_tag('/articles', remote: true) do %> - ... -<% end %> -``` - -This will generate the following HTML: - -```html -<form accept-charset="UTF-8" action="/articles" data-remote="true" method="post"> - ... -</form> -``` - -Everything else is the same as `form_for`. See its documentation for full -details. +start. -### link_to +#### link_to [`link_to`](http://api.rubyonrails.org/classes/ActionView/Helpers/UrlHelper.html#method-i-link_to) is a helper that assists with generating links. It has a `:remote` option you @@ -230,7 +213,7 @@ which generates <a href="/articles/1" data-remote="true">an article</a> ``` -You can bind to the same Ajax events as `form_for`. Here's an example. Let's +You can bind to the same Ajax events as `form_with`. Here's an example. Let's assume that we have a list of articles that can be deleted with just one click. We would generate some HTML like this: @@ -246,7 +229,7 @@ $ -> alert "The article was deleted." ``` -### button_to +#### button_to [`button_to`](http://api.rubyonrails.org/classes/ActionView/Helpers/UrlHelper.html#method-i-button_to) is a helper that helps you create buttons. It has a `:remote` option that you can call like this: @@ -262,7 +245,136 @@ this generates </form> ``` -Since it's just a `<form>`, all of the information on `form_for` also applies. +Since it's just a `<form>`, all of the information on `form_with` also applies. + +### Customize remote elements + +It is possible to customize the behavior of elements with a `data-remote` +attribute without writing a line of JavaScript. Your can specify extra `data-` +attributes to accomplish this. + +#### `data-method` + +Activating hyperlinks always results in an HTTP GET request. However, if your +application is [RESTful](http://en.wikipedia.org/wiki/Representational_State_Transfer), +some links are in fact actions that change data on the server, and must be +performed with non-GET requests. This attribute allows marking up such links +with an explicit method such as "post", "put" or "delete". + +The way it works is that, when the link is activated, it constructs a hidden form +in the document with the "action" attribute corresponding to "href" value of the +link, and the method corresponding to `data-method` value, and submits that form. + +NOTE: Because submitting forms with HTTP methods other than GET and POST isn't +widely supported across browsers, all other HTTP methods are actually sent over +POST with the intended method indicated in the `_method` parameter. Rails +automatically detects and compensates for this. + +#### `data-url` and `data-params` + +Certain elements of your page aren't actually referring to any URL, but you may want +them to trigger Ajax calls. Specifying the `data-url` attribute along with +the `data-remote` one will trigger an Ajax call to the given URL. You can also +specify extra parameters through the `data-params` attribute. + +This can be useful to trigger an action on check-boxes for instance: + +```html +<input type="checkbox" data-remote="true" + data-url="/update" data-params="id=10" data-method="put"> +``` + +#### `data-type` + +It is also possible to define the Ajax `dataType` explicitly while performing +requests for `data-remote` elements, by way of the `data-type` attribute. + +### Confirmations + +You can ask for an extra confirmation of the user by adding a `data-confirm` +attribute on links and forms. The user will be presented a JavaScript `confirm()` +dialog containing the attribute's text. If the user chooses to cancel, the action +doesn't take place. + +Adding this attribute on links will trigger the dialog on click, and adding it +on forms will trigger it on submit. For example: + +```erb +<%= link_to "Dangerous zone", dangerous_zone_path, + data: { confirm: 'Are you sure?' } %> +``` + +This generates: + +```html +<a href="..." data-confirm="Are you sure?">Dangerous zone</a> +``` + +The attribute is also allowed on form submit buttons. This allows you to customize +the warning message depending on the button which was activated. In this case, +you should **not** have `data-confirm` on the form itself. + +The default confirmation uses a JavaScript confirm dialog, but you can customize +this by listening to the `confirm` event, which is fired just before the confirmation +window appears to the user. To cancel this default confirmation, have the confirm +handler to return `false`. + +### Automatic disabling + +It is also possible to automatically disable an input while the form is submitting +by using the `data-disable-with` attribute. This is to prevent accidental +double-clicks from the user, which could result in duplicate HTTP requests that +the backend may not detect as such. The value of the attribute is the text that will +become the new value of the button in its disabled state. + +This also works for links with `data-method` attribute. + +For example: + +```erb +<%= form_with(model: @article.new) do |f| %> + <%= f.submit data: { "disable-with": "Saving..." } %> +<%= end %> +``` + +This generates a form with: + +```html +<input data-disable-with="Saving..." type="submit"> +``` + +Dealing with Ajax events +------------------------ + +Here are the different events that are fired when you deal with elements +that have a `data-remote` attribute: + +NOTE: All handlers bound to these events are always passed the event object as the +first argument. The table below describes the extra parameters passed after the +event argument. For exemple, if the extra parameters are listed as `xhr, settings`, +then to access them, you would define your handler with `function(event, xhr, settings)`. + +| Event name | Extra parameters | Fired | +|---------------------|------------------|-------------------------------------------------------------| +| `ajax:before` | | Before the whole ajax business, aborts if stopped. | +| `ajax:beforeSend` | xhr, options | Before the request is sent, aborts if stopped. | +| `ajax:send` | xhr | When the request is sent. | +| `ajax:success` | xhr, status, err | After completion, if the response was a success. | +| `ajax:error` | xhr, status, err | After completion, if the response was an error. | +| `ajax:complete` | xhr, status | After the request has been completed, no matter the outcome.| +| `ajax:aborted:file` | elements | If there are non-blank file inputs, aborts if stopped. | + +### Stoppable events + +If you stop `ajax:before` or `ajax:beforeSend` by returning false from the +handler method, the Ajax request will never take place. The `ajax:before` event +is also useful for manipulating form data before serialization. The +`ajax:beforeSend` event is also useful for adding custom request headers. + +If you stop the `ajax:aborted:file` event, the default behavior of allowing the +browser to submit the form via normal means (i.e. non-AJAX submission) will be +canceled and the form will not be submitted at all. This is useful for +implementing your own AJAX file upload workaround. Server-Side Concerns -------------------- @@ -297,7 +409,7 @@ The index view (`app/views/users/index.html.erb`) contains: <br> -<%= form_for(@user, remote: true) do |f| %> +<%= form_with(model: @user) do |f| %> <%= f.label :name %><br> <%= f.text_field :name %> <%= f.submit %> @@ -338,7 +450,7 @@ this: end ``` -Notice the format.js in the `respond_to` block; that allows the controller to +Notice the `format.js` in the `respond_to` block: that allows the controller to respond to your Ajax request. You then have a corresponding `app/views/users/create.js.erb` view file that generates the actual JavaScript code that will be sent and executed on the client side. @@ -355,7 +467,7 @@ which uses Ajax to speed up page rendering in most applications. ### How Turbolinks Works -Turbolinks attaches a click handler to all `<a>` on the page. If your browser +Turbolinks attaches a click handler to all `<a>` tags on the page. If your browser supports [PushState](https://developer.mozilla.org/en-US/docs/Web/Guide/API/DOM/Manipulating_the_browser_history#The_pushState%28%29_method), Turbolinks will make an Ajax request for the page, parse the response, and @@ -385,7 +497,7 @@ $(document).ready -> ``` However, because Turbolinks overrides the normal page loading process, the -event that this relies on will not be fired. If you have code that looks like +event that this relies upon will not be fired. If you have code that looks like this, you must change your code to do this instead: ```coffeescript |