diff options
Diffstat (limited to 'guides/source')
50 files changed, 160 insertions, 160 deletions
diff --git a/guides/source/2_2_release_notes.md b/guides/source/2_2_release_notes.md index 019da08687..be00087f63 100644 --- a/guides/source/2_2_release_notes.md +++ b/guides/source/2_2_release_notes.md @@ -1,4 +1,4 @@ -**DO NOT READ THIS FILE IN GITHUB, GUIDES ARE PUBLISHED IN http://guides.rubyonrails.org.** +**DO NOT READ THIS FILE ON GITHUB, GUIDES ARE PUBLISHED ON http://guides.rubyonrails.org.** Ruby on Rails 2.2 Release Notes =============================== diff --git a/guides/source/2_3_release_notes.md b/guides/source/2_3_release_notes.md index 4ac1529e76..328656f4a4 100644 --- a/guides/source/2_3_release_notes.md +++ b/guides/source/2_3_release_notes.md @@ -1,4 +1,4 @@ -**DO NOT READ THIS FILE IN GITHUB, GUIDES ARE PUBLISHED IN http://guides.rubyonrails.org.** +**DO NOT READ THIS FILE ON GITHUB, GUIDES ARE PUBLISHED ON http://guides.rubyonrails.org.** Ruby on Rails 2.3 Release Notes =============================== diff --git a/guides/source/3_0_release_notes.md b/guides/source/3_0_release_notes.md index 3d7966e50b..9ad32e8168 100644 --- a/guides/source/3_0_release_notes.md +++ b/guides/source/3_0_release_notes.md @@ -1,4 +1,4 @@ -**DO NOT READ THIS FILE IN GITHUB, GUIDES ARE PUBLISHED IN http://guides.rubyonrails.org.** +**DO NOT READ THIS FILE ON GITHUB, GUIDES ARE PUBLISHED ON http://guides.rubyonrails.org.** Ruby on Rails 3.0 Release Notes =============================== diff --git a/guides/source/3_1_release_notes.md b/guides/source/3_1_release_notes.md index 8728750966..e187e5f9ab 100644 --- a/guides/source/3_1_release_notes.md +++ b/guides/source/3_1_release_notes.md @@ -1,4 +1,4 @@ -**DO NOT READ THIS FILE IN GITHUB, GUIDES ARE PUBLISHED IN http://guides.rubyonrails.org.** +**DO NOT READ THIS FILE ON GITHUB, GUIDES ARE PUBLISHED ON http://guides.rubyonrails.org.** Ruby on Rails 3.1 Release Notes =============================== diff --git a/guides/source/3_2_release_notes.md b/guides/source/3_2_release_notes.md index 0b28aac9ce..6ddf77d9c0 100644 --- a/guides/source/3_2_release_notes.md +++ b/guides/source/3_2_release_notes.md @@ -1,4 +1,4 @@ -**DO NOT READ THIS FILE IN GITHUB, GUIDES ARE PUBLISHED IN http://guides.rubyonrails.org.** +**DO NOT READ THIS FILE ON GITHUB, GUIDES ARE PUBLISHED ON http://guides.rubyonrails.org.** Ruby on Rails 3.2 Release Notes =============================== diff --git a/guides/source/4_0_release_notes.md b/guides/source/4_0_release_notes.md index 5f52c33746..67f4a3c02c 100644 --- a/guides/source/4_0_release_notes.md +++ b/guides/source/4_0_release_notes.md @@ -1,4 +1,4 @@ -**DO NOT READ THIS FILE IN GITHUB, GUIDES ARE PUBLISHED IN http://guides.rubyonrails.org.** +**DO NOT READ THIS FILE ON GITHUB, GUIDES ARE PUBLISHED ON http://guides.rubyonrails.org.** Ruby on Rails 4.0 Release Notes =============================== diff --git a/guides/source/4_1_release_notes.md b/guides/source/4_1_release_notes.md index dbc151c0ca..8d5557be6e 100644 --- a/guides/source/4_1_release_notes.md +++ b/guides/source/4_1_release_notes.md @@ -1,4 +1,4 @@ -**DO NOT READ THIS FILE IN GITHUB, GUIDES ARE PUBLISHED IN http://guides.rubyonrails.org.** +**DO NOT READ THIS FILE ON GITHUB, GUIDES ARE PUBLISHED ON http://guides.rubyonrails.org.** Ruby on Rails 4.1 Release Notes =============================== diff --git a/guides/source/4_2_release_notes.md b/guides/source/4_2_release_notes.md index faff1add9f..366d9d26b4 100644 --- a/guides/source/4_2_release_notes.md +++ b/guides/source/4_2_release_notes.md @@ -1,4 +1,4 @@ -**DO NOT READ THIS FILE IN GITHUB, GUIDES ARE PUBLISHED IN http://guides.rubyonrails.org.** +**DO NOT READ THIS FILE ON GITHUB, GUIDES ARE PUBLISHED ON http://guides.rubyonrails.org.** Ruby on Rails 4.2 Release Notes =============================== diff --git a/guides/source/action_controller_overview.md b/guides/source/action_controller_overview.md index 36d1b6de83..80000baf66 100644 --- a/guides/source/action_controller_overview.md +++ b/guides/source/action_controller_overview.md @@ -1,4 +1,4 @@ -**DO NOT READ THIS FILE IN GITHUB, GUIDES ARE PUBLISHED IN http://guides.rubyonrails.org.** +**DO NOT READ THIS FILE ON GITHUB, GUIDES ARE PUBLISHED ON http://guides.rubyonrails.org.** Action Controller Overview ========================== diff --git a/guides/source/action_mailer_basics.md b/guides/source/action_mailer_basics.md index c586675ee5..e55ff16495 100644 --- a/guides/source/action_mailer_basics.md +++ b/guides/source/action_mailer_basics.md @@ -1,4 +1,4 @@ -**DO NOT READ THIS FILE IN GITHUB, GUIDES ARE PUBLISHED IN http://guides.rubyonrails.org.** +**DO NOT READ THIS FILE ON GITHUB, GUIDES ARE PUBLISHED ON http://guides.rubyonrails.org.** Action Mailer Basics ==================== diff --git a/guides/source/action_view_overview.md b/guides/source/action_view_overview.md index a6bde4f517..665a2b71ff 100644 --- a/guides/source/action_view_overview.md +++ b/guides/source/action_view_overview.md @@ -1,4 +1,4 @@ -**DO NOT READ THIS FILE IN GITHUB, GUIDES ARE PUBLISHED IN http://guides.rubyonrails.org.** +**DO NOT READ THIS FILE ON GITHUB, GUIDES ARE PUBLISHED ON http://guides.rubyonrails.org.** Action View Overview ==================== diff --git a/guides/source/active_job_basics.md b/guides/source/active_job_basics.md index 31c9406d5c..4d1625b28d 100644 --- a/guides/source/active_job_basics.md +++ b/guides/source/active_job_basics.md @@ -1,4 +1,4 @@ -**DO NOT READ THIS FILE IN GITHUB, GUIDES ARE PUBLISHED IN http://guides.rubyonrails.org.** +**DO NOT READ THIS FILE ON GITHUB, GUIDES ARE PUBLISHED ON http://guides.rubyonrails.org.** Active Job Basics ================= @@ -78,7 +78,8 @@ end Enqueue a job like so: ```ruby -# Enqueue a job to be performed as soon the queueing system is free. +# Enqueue a job to be performed as soon the queueing system is +# free. MyJob.perform_later record ``` @@ -114,8 +115,9 @@ You can easily set your queueing backend: # config/application.rb module YourApp class Application < Rails::Application - # Be sure to have the adapter's gem in your Gemfile and follow - # the adapter's specific installation and deployment instructions. + # Be sure to have the adapter's gem in your Gemfile + # and follow the adapter's specific installation + # and deployment instructions. config.active_job.queue_adapter = :sidekiq end end @@ -153,8 +155,8 @@ class GuestsCleanupJob < ActiveJob::Base end # Now your job will run on queue production_low_priority on your -# production environment and on staging_low_priority on your staging -# environment +# production environment and on staging_low_priority +# on your staging environment ``` The default queue name prefix delimiter is '\_'. This can be changed by setting @@ -176,8 +178,8 @@ class GuestsCleanupJob < ActiveJob::Base end # Now your job will run on queue production.low_priority on your -# production environment and on staging.low_priority on your staging -# environment +# production environment and on staging.low_priority +# on your staging environment ``` If you want more control on what queue a job will be run you can pass a `:queue` @@ -295,7 +297,7 @@ end ``` This works with any class that mixes in `GlobalID::Identification`, which -by default has been mixed into Active Model classes. +by default has been mixed into Active Record classes. Exceptions diff --git a/guides/source/active_model_basics.md b/guides/source/active_model_basics.md index 8dee1cc5ec..4b2bfaee2f 100644 --- a/guides/source/active_model_basics.md +++ b/guides/source/active_model_basics.md @@ -1,4 +1,4 @@ -**DO NOT READ THIS FILE IN GITHUB, GUIDES ARE PUBLISHED IN http://guides.rubyonrails.org.** +**DO NOT READ THIS FILE ON GITHUB, GUIDES ARE PUBLISHED ON http://guides.rubyonrails.org.** Active Model Basics =================== @@ -396,7 +396,7 @@ class Person end ``` -With the `to_xml` you have a XML representing the model. +With the `to_xml` you have an XML representing the model. ```ruby person = Person.new @@ -405,7 +405,7 @@ person.name = "Bob" person.to_xml # => "<?xml version=\"1.0\" encoding=\"UTF-8\"?>\n<person>\n <name>Bob</name>\n</person>\n" ``` -From a XML string you define the attributes of the model. +From an XML string you define the attributes of the model. You need to have the `attributes=` method defined on your class: ```ruby diff --git a/guides/source/active_record_basics.md b/guides/source/active_record_basics.md index 9d2ba328ea..a5196e481e 100644 --- a/guides/source/active_record_basics.md +++ b/guides/source/active_record_basics.md @@ -1,4 +1,4 @@ -**DO NOT READ THIS FILE IN GITHUB, GUIDES ARE PUBLISHED IN http://guides.rubyonrails.org.** +**DO NOT READ THIS FILE ON GITHUB, GUIDES ARE PUBLISHED ON http://guides.rubyonrails.org.** Active Record Basics ==================== @@ -62,7 +62,7 @@ Convention over Configuration in Active Record When writing applications using other programming languages or frameworks, it may be necessary to write a lot of configuration code. This is particularly true for ORM frameworks in general. However, if you follow the conventions adopted by -Rails, you'll need to write very little configuration (in some case no +Rails, you'll need to write very little configuration (in some cases no configuration at all) when creating Active Record models. The idea is that if you configure your applications in the very same way most of the time then this should be the default way. Thus, explicit configuration would be needed diff --git a/guides/source/active_record_callbacks.md b/guides/source/active_record_callbacks.md index 9d3a8c3af6..e65ab802c0 100644 --- a/guides/source/active_record_callbacks.md +++ b/guides/source/active_record_callbacks.md @@ -1,4 +1,4 @@ -**DO NOT READ THIS FILE IN GITHUB, GUIDES ARE PUBLISHED IN http://guides.rubyonrails.org.** +**DO NOT READ THIS FILE ON GITHUB, GUIDES ARE PUBLISHED ON http://guides.rubyonrails.org.** Active Record Callbacks ======================= diff --git a/guides/source/active_record_migrations.md b/guides/source/active_record_migrations.md index 8ae282bad2..97cabc1728 100644 --- a/guides/source/active_record_migrations.md +++ b/guides/source/active_record_migrations.md @@ -1,4 +1,4 @@ -**DO NOT READ THIS FILE IN GITHUB, GUIDES ARE PUBLISHED IN http://guides.rubyonrails.org.** +**DO NOT READ THIS FILE ON GITHUB, GUIDES ARE PUBLISHED ON http://guides.rubyonrails.org.** Active Record Migrations ======================== diff --git a/guides/source/active_record_postgresql.md b/guides/source/active_record_postgresql.md index fa0f31cbbd..4d9c1776f4 100644 --- a/guides/source/active_record_postgresql.md +++ b/guides/source/active_record_postgresql.md @@ -1,4 +1,4 @@ -**DO NOT READ THIS FILE IN GITHUB, GUIDES ARE PUBLISHED IN http://guides.rubyonrails.org.** +**DO NOT READ THIS FILE ON GITHUB, GUIDES ARE PUBLISHED ON http://guides.rubyonrails.org.** Active Record and PostgreSQL ============================ diff --git a/guides/source/active_record_querying.md b/guides/source/active_record_querying.md index f8c64cbd0c..373a98bb85 100644 --- a/guides/source/active_record_querying.md +++ b/guides/source/active_record_querying.md @@ -1,4 +1,4 @@ -**DO NOT READ THIS FILE IN GITHUB, GUIDES ARE PUBLISHED IN http://guides.rubyonrails.org.** +**DO NOT READ THIS FILE ON GITHUB, GUIDES ARE PUBLISHED ON http://guides.rubyonrails.org.** Active Record Query Interface ============================= @@ -257,6 +257,12 @@ It is equivalent to writing: Client.where(first_name: 'Lifo').take ``` +The SQL equivalent of the above is: + +```sql +SELECT * FROM clients WHERE (clients.first_name = 'Lifo') LIMIT 1 +``` + The `find_by!` method behaves exactly like `find_by`, except that it will raise `ActiveRecord::RecordNotFound` if no matching record is found. For example: ```ruby @@ -1128,7 +1134,7 @@ This would generate a query which contains a `LEFT OUTER JOIN` whereas the If there was no `where` condition, this would generate the normal set of two queries. NOTE: Using `where` like this will only work when you pass it a Hash. For -SQL-fragments you need use `references` to force joined tables: +SQL-fragments you need to use `references` to force joined tables: ```ruby Article.includes(:comments).where("comments.visible = true").references(:comments) @@ -1269,7 +1275,7 @@ User.active.where(state: 'finished') # SELECT "users".* FROM "users" WHERE "users"."state" = 'active' AND "users"."state" = 'finished' ``` -If we do want the `last where clause` to win then `Relation#merge` can +If we do want the last `where` clause to win then `Relation#merge` can be used. ```ruby diff --git a/guides/source/active_record_validations.md b/guides/source/active_record_validations.md index 8c832bafff..c9af70934a 100644 --- a/guides/source/active_record_validations.md +++ b/guides/source/active_record_validations.md @@ -1,4 +1,4 @@ -**DO NOT READ THIS FILE IN GITHUB, GUIDES ARE PUBLISHED IN http://guides.rubyonrails.org.** +**DO NOT READ THIS FILE ON GITHUB, GUIDES ARE PUBLISHED ON http://guides.rubyonrails.org.** Active Record Validations ========================= diff --git a/guides/source/active_support_core_extensions.md b/guides/source/active_support_core_extensions.md index ba839e1723..0fbd6ed7e1 100644 --- a/guides/source/active_support_core_extensions.md +++ b/guides/source/active_support_core_extensions.md @@ -1,4 +1,4 @@ -**DO NOT READ THIS FILE IN GITHUB, GUIDES ARE PUBLISHED IN http://guides.rubyonrails.org.** +**DO NOT READ THIS FILE ON GITHUB, GUIDES ARE PUBLISHED ON http://guides.rubyonrails.org.** Active Support Core Extensions ============================== @@ -467,7 +467,7 @@ C.new(0, 1).instance_variable_names # => ["@x", "@y"] NOTE: Defined in `active_support/core_ext/object/instance_variables.rb`. -### Silencing Warnings, Streams, and Exceptions +### Silencing Warnings and Exceptions The methods `silence_warnings` and `enable_warnings` change the value of `$VERBOSE` accordingly for the duration of their block, and reset it afterwards: @@ -475,26 +475,10 @@ The methods `silence_warnings` and `enable_warnings` change the value of `$VERBO silence_warnings { Object.const_set "RAILS_DEFAULT_LOGGER", logger } ``` -You can silence any stream while a block runs with `silence_stream`: - -```ruby -silence_stream(STDOUT) do - # STDOUT is silent here -end -``` - -The `quietly` method addresses the common use case where you want to silence STDOUT and STDERR, even in subprocesses: - -```ruby -quietly { system 'bundle install' } -``` - -For example, the railties test suite uses that one in a few places to prevent command messages from being echoed intermixed with the progress status. - Silencing exceptions is also possible with `suppress`. This method receives an arbitrary number of exception classes. If an exception is raised during the execution of the block and is `kind_of?` any of the arguments, `suppress` captures it and returns silently. Otherwise the exception is reraised: ```ruby -# If the user is locked the increment is lost, no big deal. +# If the user is locked, the increment is lost, no big deal. suppress(ActiveRecord::StaleObjectError) do current_user.increment! :visits end @@ -3813,50 +3797,6 @@ WARNING. If the argument is an `IO` it needs to respond to `rewind` to be able t NOTE: Defined in `active_support/core_ext/marshal.rb`. -Extensions to `Logger` ----------------------- - -### `around_[level]` - -Takes two arguments, a `before_message` and `after_message` and calls the current level method on the `Logger` instance, passing in the `before_message`, then the specified message, then the `after_message`: - -```ruby -logger = Logger.new("log/development.log") -logger.around_info("before", "after") { |logger| logger.info("during") } -``` - -### `silence` - -Silences every log level lesser to the specified one for the duration of the given block. Log level orders are: debug, info, error and fatal. - -```ruby -logger = Logger.new("log/development.log") -logger.silence(Logger::INFO) do - logger.debug("In space, no one can hear you scream.") - logger.info("Scream all you want, small mailman!") -end -``` - -### `datetime_format=` - -Modifies the datetime format output by the formatter class associated with this logger. If the formatter class does not have a `datetime_format` method then this is ignored. - -```ruby -class Logger::FormatWithTime < Logger::Formatter - cattr_accessor(:datetime_format) { "%Y%m%d%H%m%S" } - - def self.call(severity, timestamp, progname, msg) - "#{timestamp.strftime(datetime_format)} -- #{String === msg ? msg : msg.inspect}\n" - end -end - -logger = Logger.new("log/development.log") -logger.formatter = Logger::FormatWithTime -logger.info("<- is the current time") -``` - -NOTE: Defined in `active_support/core_ext/logger.rb`. - Extensions to `NameError` ------------------------- diff --git a/guides/source/active_support_instrumentation.md b/guides/source/active_support_instrumentation.md index 0aa74e387d..9d9f40e956 100644 --- a/guides/source/active_support_instrumentation.md +++ b/guides/source/active_support_instrumentation.md @@ -1,4 +1,4 @@ -**DO NOT READ THIS FILE IN GITHUB, GUIDES ARE PUBLISHED IN http://guides.rubyonrails.org.** +**DO NOT READ THIS FILE ON GITHUB, GUIDES ARE PUBLISHED ON http://guides.rubyonrails.org.** Active Support Instrumentation ============================== diff --git a/guides/source/api_documentation_guidelines.md b/guides/source/api_documentation_guidelines.md index d481700709..b385bdbe83 100644 --- a/guides/source/api_documentation_guidelines.md +++ b/guides/source/api_documentation_guidelines.md @@ -1,4 +1,4 @@ -**DO NOT READ THIS FILE IN GITHUB, GUIDES ARE PUBLISHED IN http://guides.rubyonrails.org.** +**DO NOT READ THIS FILE ON GITHUB, GUIDES ARE PUBLISHED ON http://guides.rubyonrails.org.** API Documentation Guidelines ============================ diff --git a/guides/source/asset_pipeline.md b/guides/source/asset_pipeline.md index 64d1c31083..52ea605a72 100644 --- a/guides/source/asset_pipeline.md +++ b/guides/source/asset_pipeline.md @@ -1,4 +1,4 @@ -**DO NOT READ THIS FILE IN GITHUB, GUIDES ARE PUBLISHED IN http://guides.rubyonrails.org.** +**DO NOT READ THIS FILE ON GITHUB, GUIDES ARE PUBLISHED ON http://guides.rubyonrails.org.** The Asset Pipeline ================== @@ -149,7 +149,7 @@ clients to fetch them again, even when the content of those assets has not chang Fingerprinting fixes these problems by avoiding query strings, and by ensuring that filenames are consistent based on their content. -Fingerprinting is enabled by default for production and disabled for all other +Fingerprinting is enabled by default for both the development and production environments. You can enable or disable it in your configuration through the `config.assets.digest` option. diff --git a/guides/source/association_basics.md b/guides/source/association_basics.md index 95c7e747ef..dab885a8fb 100644 --- a/guides/source/association_basics.md +++ b/guides/source/association_basics.md @@ -1,4 +1,4 @@ -**DO NOT READ THIS FILE IN GITHUB, GUIDES ARE PUBLISHED IN http://guides.rubyonrails.org.** +**DO NOT READ THIS FILE ON GITHUB, GUIDES ARE PUBLISHED ON http://guides.rubyonrails.org.** Active Record Associations ========================== diff --git a/guides/source/autoloading_and_reloading_constants.md b/guides/source/autoloading_and_reloading_constants.md index 489ea681e2..c4fac1cff5 100644 --- a/guides/source/autoloading_and_reloading_constants.md +++ b/guides/source/autoloading_and_reloading_constants.md @@ -1,4 +1,4 @@ -**DO NOT READ THIS FILE IN GITHUB, GUIDES ARE PUBLISHED IN http://guides.rubyonrails.org.** +**DO NOT READ THIS FILE ON GITHUB, GUIDES ARE PUBLISHED ON http://guides.rubyonrails.org.** Autoloading and Reloading Constants =================================== @@ -80,7 +80,8 @@ end ``` The *nesting* at any given place is the collection of enclosing nested class and -module objects outwards. For example, in the previous example, the nesting at +module objects outwards. The nesting at any given place can be inspected with +`Module.nesting`. For example, in the previous example, the nesting at (1) is ```ruby @@ -153,8 +154,6 @@ the blocks that may be passed to `Class.new` and `Module.new` do not get the class or module being defined pushed to their nesting. That's one of the differences between defining classes and modules in one way or another. -The nesting at any given place can be inspected with `Module.nesting`. - ### Class and Module Definitions are Constant Assignments Let's suppose the following snippet creates a class (rather than reopening it): @@ -236,7 +235,7 @@ end ``` `Post` is not syntax for a class. Rather, `Post` is a regular Ruby constant. If -all is good, the constant evaluates to an object that responds to `all`. +all is good, the constant is evaluated to an object that responds to `all`. That is why we talk about *constant* autoloading, Rails has the ability to load constants on the fly. @@ -330,7 +329,7 @@ checked. Rails autoloading **does not emulate this algorithm**, but its starting point is the name of the constant to be autoloaded, and the parent. See more in -[Qualified References](#qualified-references). +[Qualified References](#autoloading-algorithms-qualified-references). Vocabulary @@ -685,12 +684,12 @@ creates an empty module and assigns it to the `Admin` constant on the fly. ### Generic Procedure Relative references are reported to be missing in the cref where they were hit, -and qualified references are reported to be missing in their parent. (See +and qualified references are reported to be missing in their parent (see [Resolution Algorithm for Relative Constants](#resolution-algorithm-for-relative-constants) at the beginning of this guide for the definition of *cref*, and [Resolution Algorithm for Qualified Constants](#resolution-algorithm-for-qualified-constants) for the definition of -*parent*.) +*parent*). The procedure to autoload constant `C` in an arbitrary situation is as follows: @@ -868,8 +867,8 @@ end ``` To resolve `User` Ruby checks `Admin` in the former case, but it does not in -the latter because it does not belong to the nesting. (See [Nesting](#nesting) -and [Resolution Algorithms](#resolution-algorithms).) +the latter because it does not belong to the nesting (see [Nesting](#nesting) +and [Resolution Algorithms](#resolution-algorithms)). Unfortunately Rails autoloading does not know the nesting in the spot where the constant was missing and so it is not able to act as Ruby would. In particular, @@ -1284,7 +1283,7 @@ c.user # NameError: uninitialized constant C::User ``` because it detects that a parent namespace already has the constant (see [Qualified -References](#autoloading-algorithms-qualified-references).) +References](#autoloading-algorithms-qualified-references)). As with pure Ruby, within the body of a direct descendant of `BasicObject` use always absolute constant paths: diff --git a/guides/source/caching_with_rails.md b/guides/source/caching_with_rails.md index 61b991df61..0fa20f7ccf 100644 --- a/guides/source/caching_with_rails.md +++ b/guides/source/caching_with_rails.md @@ -1,4 +1,4 @@ -**DO NOT READ THIS FILE IN GITHUB, GUIDES ARE PUBLISHED IN http://guides.rubyonrails.org.** +**DO NOT READ THIS FILE ON GITHUB, GUIDES ARE PUBLISHED ON http://guides.rubyonrails.org.** Caching with Rails: An overview =============================== @@ -184,6 +184,10 @@ class ProductsController < ApplicationController end ``` +The second time the same query is run against the database, it's not actually going to hit the database. The first time the result is returned from the query it is stored in the query cache (in memory) and the second time it's pulled from memory. + +However, it's important to note that query caches are created at the start of an action and destroyed at the end of that action and thus persist only for the duration of the action. If you'd like to store query results in a more persistent fashion, you can in Rails by using low level caching. + Cache Stores ------------ diff --git a/guides/source/command_line.md b/guides/source/command_line.md index 7567a38aef..78f26ccefa 100644 --- a/guides/source/command_line.md +++ b/guides/source/command_line.md @@ -1,4 +1,4 @@ -**DO NOT READ THIS FILE IN GITHUB, GUIDES ARE PUBLISHED IN http://guides.rubyonrails.org.** +**DO NOT READ THIS FILE ON GITHUB, GUIDES ARE PUBLISHED ON http://guides.rubyonrails.org.** The Rails Command Line ====================== diff --git a/guides/source/configuring.md b/guides/source/configuring.md index 622f79a50f..9c0f2ddc8a 100644 --- a/guides/source/configuring.md +++ b/guides/source/configuring.md @@ -1,4 +1,4 @@ -**DO NOT READ THIS FILE IN GITHUB, GUIDES ARE PUBLISHED IN http://guides.rubyonrails.org.** +**DO NOT READ THIS FILE ON GITHUB, GUIDES ARE PUBLISHED ON http://guides.rubyonrails.org.** Configuring Rails Applications ============================== @@ -692,7 +692,7 @@ development: pool: 5 ``` -Prepared Statements are enabled by default on PostgreSQL. You can be disable prepared statements by setting `prepared_statements` to `false`: +Prepared Statements are enabled by default on PostgreSQL. You can disable prepared statements by setting `prepared_statements` to `false`: ```yaml production: diff --git a/guides/source/contributing_to_ruby_on_rails.md b/guides/source/contributing_to_ruby_on_rails.md index db3f19f8ac..7381521658 100644 --- a/guides/source/contributing_to_ruby_on_rails.md +++ b/guides/source/contributing_to_ruby_on_rails.md @@ -1,4 +1,4 @@ -**DO NOT READ THIS FILE IN GITHUB, GUIDES ARE PUBLISHED IN http://guides.rubyonrails.org.** +**DO NOT READ THIS FILE ON GITHUB, GUIDES ARE PUBLISHED ON http://guides.rubyonrails.org.** Contributing to Ruby on Rails ============================= @@ -26,7 +26,7 @@ NOTE: Bugs in the most recent released version of Ruby on Rails are likely to ge ### Creating a Bug Report -If you've found a problem in Ruby on Rails which is not a security risk, do a search in GitHub under [Issues](https://github.com/rails/rails/issues) in case it has already been reported. If you are unable to find any open GitHub issues addressing the problem you found, your next step will be to [open a new one](https://github.com/rails/rails/issues/new). (See the next section for reporting security issues.) +If you've found a problem in Ruby on Rails which is not a security risk, do a search on GitHub under [Issues](https://github.com/rails/rails/issues) in case it has already been reported. If you are unable to find any open GitHub issues addressing the problem you found, your next step will be to [open a new one](https://github.com/rails/rails/issues/new). (See the next section for reporting security issues.) Your issue report should contain a title and a clear description of the issue at the bare minimum. You should include as much relevant information as possible and should at least post a code sample that demonstrates the issue. It would be even better if you could include a unit test that shows how the expected behavior is not occurring. Your goal should be to make it easy for yourself - and others - to replicate the bug and figure out a fix. diff --git a/guides/source/debugging_rails_applications.md b/guides/source/debugging_rails_applications.md index cef9ac083b..a788dd48ad 100644 --- a/guides/source/debugging_rails_applications.md +++ b/guides/source/debugging_rails_applications.md @@ -1,4 +1,4 @@ -**DO NOT READ THIS FILE IN GITHUB, GUIDES ARE PUBLISHED IN http://guides.rubyonrails.org.** +**DO NOT READ THIS FILE ON GITHUB, GUIDES ARE PUBLISHED ON http://guides.rubyonrails.org.** Debugging Rails Applications ============================ diff --git a/guides/source/development_dependencies_install.md b/guides/source/development_dependencies_install.md index 9eacc3a2fe..989b29956c 100644 --- a/guides/source/development_dependencies_install.md +++ b/guides/source/development_dependencies_install.md @@ -1,4 +1,4 @@ -**DO NOT READ THIS FILE IN GITHUB, GUIDES ARE PUBLISHED IN http://guides.rubyonrails.org.** +**DO NOT READ THIS FILE ON GITHUB, GUIDES ARE PUBLISHED ON http://guides.rubyonrails.org.** Development Dependencies Install ================================ diff --git a/guides/source/engines.md b/guides/source/engines.md index 731178787f..6eb558885f 100644 --- a/guides/source/engines.md +++ b/guides/source/engines.md @@ -1,4 +1,4 @@ -**DO NOT READ THIS FILE IN GITHUB, GUIDES ARE PUBLISHED IN http://guides.rubyonrails.org.** +**DO NOT READ THIS FILE ON GITHUB, GUIDES ARE PUBLISHED ON http://guides.rubyonrails.org.** Getting Started with Engines ============================ diff --git a/guides/source/form_helpers.md b/guides/source/form_helpers.md index a8dcd3ee4f..4c02c99cc7 100644 --- a/guides/source/form_helpers.md +++ b/guides/source/form_helpers.md @@ -1,4 +1,4 @@ -**DO NOT READ THIS FILE IN GITHUB, GUIDES ARE PUBLISHED IN http://guides.rubyonrails.org.** +**DO NOT READ THIS FILE ON GITHUB, GUIDES ARE PUBLISHED ON http://guides.rubyonrails.org.** Form Helpers ============ @@ -275,7 +275,7 @@ There are a few things to note here: The resulting HTML is: ```html -<form accept-charset="UTF-8" action="/articles/create" method="post" class="nifty_form"> +<form accept-charset="UTF-8" action="/articles" method="post" class="nifty_form"> <input id="article_title" name="article[title]" type="text" /> <textarea id="article_body" name="article[body]" cols="60" rows="12"></textarea> <input name="commit" type="submit" value="Create" /> @@ -300,7 +300,7 @@ You can create a similar binding without actually creating `<form>` tags with th which produces the following output: ```html -<form accept-charset="UTF-8" action="/people/create" class="new_person" id="new_person" method="post"> +<form accept-charset="UTF-8" action="/people" class="new_person" id="new_person" method="post"> <input id="person_name" name="person[name]" type="text" /> <input id="contact_detail_phone_number" name="contact_detail[phone_number]" type="text" /> </form> diff --git a/guides/source/generators.md b/guides/source/generators.md index 05bf07b4c8..14f451cbc9 100644 --- a/guides/source/generators.md +++ b/guides/source/generators.md @@ -1,4 +1,4 @@ -**DO NOT READ THIS FILE IN GITHUB, GUIDES ARE PUBLISHED IN http://guides.rubyonrails.org.** +**DO NOT READ THIS FILE ON GITHUB, GUIDES ARE PUBLISHED ON http://guides.rubyonrails.org.** Creating and Customizing Rails Generators & Templates ===================================================== diff --git a/guides/source/getting_started.md b/guides/source/getting_started.md index d80622ef00..5945d48e98 100644 --- a/guides/source/getting_started.md +++ b/guides/source/getting_started.md @@ -1,4 +1,4 @@ -**DO NOT READ THIS FILE IN GITHUB, GUIDES ARE PUBLISHED IN http://guides.rubyonrails.org.** +**DO NOT READ THIS FILE ON GITHUB, GUIDES ARE PUBLISHED ON http://guides.rubyonrails.org.** Getting Started with Rails ========================== @@ -1271,8 +1271,8 @@ bottom of the template: ```html+erb ... -<%= link_to 'Back', articles_path %> | -<%= link_to 'Edit', edit_article_path(@article) %> +<%= link_to 'Edit', edit_article_path(@article) %> | +<%= link_to 'Back', articles_path %> ``` And here's how our app looks so far: @@ -1485,6 +1485,9 @@ Without this file, the confirmation dialog box wouldn't appear.  +TIP: Learn more about jQuery Unobtrusive Adapter (jQuery UJS) on +[Working With Javascript in Rails](working_with_javascript_in_rails.html) guide. + Congratulations, you can now create, show, list, update and destroy articles. @@ -1681,8 +1684,8 @@ So first, we'll wire up the Article show template </p> <% end %> -<%= link_to 'Back', articles_path %> | -<%= link_to 'Edit', edit_article_path(@article) %> +<%= link_to 'Edit', edit_article_path(@article) %> | +<%= link_to 'Back', articles_path %> ``` This adds a form on the `Article` show page that creates a new comment by @@ -1762,8 +1765,8 @@ add that to the `app/views/articles/show.html.erb`. </p> <% end %> -<%= link_to 'Edit Article', edit_article_path(@article) %> | -<%= link_to 'Back to Articles', articles_path %> +<%= link_to 'Edit', edit_article_path(@article) %> | +<%= link_to 'Back', articles_path %> ``` Now you can add articles and comments to your blog and have them show up in the @@ -1828,8 +1831,8 @@ following: </p> <% end %> -<%= link_to 'Edit Article', edit_article_path(@article) %> | -<%= link_to 'Back to Articles', articles_path %> +<%= link_to 'Edit', edit_article_path(@article) %> | +<%= link_to 'Back', articles_path %> ``` This will now render the partial in `app/views/comments/_comment.html.erb` once @@ -1878,8 +1881,8 @@ Then you make the `app/views/articles/show.html.erb` look like the following: <h2>Add a comment:</h2> <%= render 'comments/form' %> -<%= link_to 'Edit Article', edit_article_path(@article) %> | -<%= link_to 'Back to Articles', articles_path %> +<%= link_to 'Edit', edit_article_path(@article) %> | +<%= link_to 'Back', articles_path %> ``` The second render just defines the partial template we want to render, diff --git a/guides/source/i18n.md b/guides/source/i18n.md index bd6babff41..fd2051e675 100644 --- a/guides/source/i18n.md +++ b/guides/source/i18n.md @@ -1,4 +1,4 @@ -**DO NOT READ THIS FILE IN GITHUB, GUIDES ARE PUBLISHED IN http://guides.rubyonrails.org.** +**DO NOT READ THIS FILE ON GITHUB, GUIDES ARE PUBLISHED ON http://guides.rubyonrails.org.** Rails Internationalization (I18n) API ===================================== @@ -530,7 +530,7 @@ Thus the following calls are equivalent: ```ruby I18n.t 'activerecord.errors.messages.record_invalid' -I18n.t 'errors.messages.record_invalid', scope: :active_record +I18n.t 'errors.messages.record_invalid', scope: :activerecord I18n.t :record_invalid, scope: 'activerecord.errors.messages' I18n.t :record_invalid, scope: [:activerecord, :errors, :messages] ``` diff --git a/guides/source/initialization.md b/guides/source/initialization.md index a93ceb7fb5..8fbb234698 100644 --- a/guides/source/initialization.md +++ b/guides/source/initialization.md @@ -1,4 +1,4 @@ -**DO NOT READ THIS FILE IN GITHUB, GUIDES ARE PUBLISHED IN http://guides.rubyonrails.org.** +**DO NOT READ THIS FILE ON GITHUB, GUIDES ARE PUBLISHED ON http://guides.rubyonrails.org.** The Rails Initialization Process ================================ diff --git a/guides/source/layouts_and_rendering.md b/guides/source/layouts_and_rendering.md index c3cde49630..eb3c188d38 100644 --- a/guides/source/layouts_and_rendering.md +++ b/guides/source/layouts_and_rendering.md @@ -1,4 +1,4 @@ -**DO NOT READ THIS FILE IN GITHUB, GUIDES ARE PUBLISHED IN http://guides.rubyonrails.org.** +**DO NOT READ THIS FILE ON GITHUB, GUIDES ARE PUBLISHED ON http://guides.rubyonrails.org.** Layouts and Rendering in Rails ============================== @@ -255,7 +255,7 @@ extension for the layout file. #### Rendering HTML -You can send a HTML string back to the browser by using the `:html` option to +You can send an HTML string back to the browser by using the `:html` option to `render`: ```ruby diff --git a/guides/source/maintenance_policy.md b/guides/source/maintenance_policy.md index 45cdc549f7..50308f505a 100644 --- a/guides/source/maintenance_policy.md +++ b/guides/source/maintenance_policy.md @@ -1,4 +1,4 @@ -**DO NOT READ THIS FILE IN GITHUB, GUIDES ARE PUBLISHED IN http://guides.rubyonrails.org.** +**DO NOT READ THIS FILE ON GITHUB, GUIDES ARE PUBLISHED ON http://guides.rubyonrails.org.** Maintenance Policy for Ruby on Rails ==================================== diff --git a/guides/source/nested_model_forms.md b/guides/source/nested_model_forms.md index 44236ad239..1937369776 100644 --- a/guides/source/nested_model_forms.md +++ b/guides/source/nested_model_forms.md @@ -1,4 +1,4 @@ -**DO NOT READ THIS FILE IN GITHUB, GUIDES ARE PUBLISHED IN http://guides.rubyonrails.org.** +**DO NOT READ THIS FILE ON GITHUB, GUIDES ARE PUBLISHED ON http://guides.rubyonrails.org.** Rails Nested Model Forms ======================== diff --git a/guides/source/plugins.md b/guides/source/plugins.md index bd884441ac..10738320ef 100644 --- a/guides/source/plugins.md +++ b/guides/source/plugins.md @@ -1,4 +1,4 @@ -**DO NOT READ THIS FILE IN GITHUB, GUIDES ARE PUBLISHED IN http://guides.rubyonrails.org.** +**DO NOT READ THIS FILE ON GITHUB, GUIDES ARE PUBLISHED ON http://guides.rubyonrails.org.** The Basics of Creating Rails Plugins ==================================== diff --git a/guides/source/profiling.md b/guides/source/profiling.md index 695b09647f..ce093f78ba 100644 --- a/guides/source/profiling.md +++ b/guides/source/profiling.md @@ -1,4 +1,4 @@ -*DO NOT READ THIS FILE IN GITHUB, GUIDES ARE PUBLISHED IN http://guides.rubyonrails.org.** +*DO NOT READ THIS FILE ON GITHUB, GUIDES ARE PUBLISHED ON http://guides.rubyonrails.org.** A Guide to Profiling Rails Applications ======================================= diff --git a/guides/source/rails_application_templates.md b/guides/source/rails_application_templates.md index 0db777b9bb..b3e1874048 100644 --- a/guides/source/rails_application_templates.md +++ b/guides/source/rails_application_templates.md @@ -1,4 +1,4 @@ -**DO NOT READ THIS FILE IN GITHUB, GUIDES ARE PUBLISHED IN http://guides.rubyonrails.org.** +**DO NOT READ THIS FILE ON GITHUB, GUIDES ARE PUBLISHED ON http://guides.rubyonrails.org.** Rails Application Templates =========================== diff --git a/guides/source/rails_on_rack.md b/guides/source/rails_on_rack.md index 561a3d9392..21be74beba 100644 --- a/guides/source/rails_on_rack.md +++ b/guides/source/rails_on_rack.md @@ -1,4 +1,4 @@ -**DO NOT READ THIS FILE IN GITHUB, GUIDES ARE PUBLISHED IN http://guides.rubyonrails.org.** +**DO NOT READ THIS FILE ON GITHUB, GUIDES ARE PUBLISHED ON http://guides.rubyonrails.org.** Rails on Rack ============= diff --git a/guides/source/routing.md b/guides/source/routing.md index 893cedeefc..a689e131ff 100644 --- a/guides/source/routing.md +++ b/guides/source/routing.md @@ -1,4 +1,4 @@ -**DO NOT READ THIS FILE IN GITHUB, GUIDES ARE PUBLISHED IN http://guides.rubyonrails.org.** +**DO NOT READ THIS FILE ON GITHUB, GUIDES ARE PUBLISHED ON http://guides.rubyonrails.org.** Rails Routing from the Outside In ================================= diff --git a/guides/source/ruby_on_rails_guides_guidelines.md b/guides/source/ruby_on_rails_guides_guidelines.md index 0ecf8a80df..1323742488 100644 --- a/guides/source/ruby_on_rails_guides_guidelines.md +++ b/guides/source/ruby_on_rails_guides_guidelines.md @@ -1,4 +1,4 @@ -**DO NOT READ THIS FILE IN GITHUB, GUIDES ARE PUBLISHED IN http://guides.rubyonrails.org.** +**DO NOT READ THIS FILE ON GITHUB, GUIDES ARE PUBLISHED ON http://guides.rubyonrails.org.** Ruby on Rails Guides Guidelines =============================== diff --git a/guides/source/security.md b/guides/source/security.md index e4cc79df55..e486edde31 100644 --- a/guides/source/security.md +++ b/guides/source/security.md @@ -1,4 +1,4 @@ -**DO NOT READ THIS FILE IN GITHUB, GUIDES ARE PUBLISHED IN http://guides.rubyonrails.org.** +**DO NOT READ THIS FILE ON GITHUB, GUIDES ARE PUBLISHED ON http://guides.rubyonrails.org.** Ruby on Rails Security Guide ============================ @@ -1029,7 +1029,6 @@ Additional Resources The security landscape shifts and it is important to keep up to date, because missing a new vulnerability can be catastrophic. You can find additional resources about (Rails) security here: -* The Ruby on Rails security project posts security news regularly: [http://www.rorsecurity.info](http://www.rorsecurity.info) * Subscribe to the Rails security [mailing list](http://groups.google.com/group/rubyonrails-security) * [Keep up to date on the other application layers](http://secunia.com/) (they have a weekly newsletter, too) * A [good security blog](http://ha.ckers.org/blog/) including the [Cross-Site scripting Cheat Sheet](http://ha.ckers.org/xss.html) diff --git a/guides/source/testing.md b/guides/source/testing.md index 21b0b37efa..94cfcf12b7 100644 --- a/guides/source/testing.md +++ b/guides/source/testing.md @@ -1,4 +1,4 @@ -**DO NOT READ THIS FILE IN GITHUB, GUIDES ARE PUBLISHED IN http://guides.rubyonrails.org.** +**DO NOT READ THIS FILE ON GITHUB, GUIDES ARE PUBLISHED ON http://guides.rubyonrails.org.** A Guide to Testing Rails Applications ===================================== @@ -528,6 +528,19 @@ All of request types have equivalent methods that you can use. In a typical C.R. NOTE: Functional tests do not verify whether the specified request type is accepted by the action, we're more concerned with the result. Request tests exist for this use case to make your tests more purposeful. +### Testing XHR (AJAX) requests + +`xhr` accepts method (listed in the section above), action name and parameters: + +```ruby +test "ajax request responds with no layout" do + xhr :get, :show, id: articles(:first).id + + assert_template :index + assert_template layout: nil +end +``` + ### The Four Hashes of the Apocalypse After a request has been made and processed, you will have 4 Hash objects ready for use: @@ -740,10 +753,8 @@ class ArticlesControllerTest < ActionController::TestCase # called after every single test def teardown - # as we are re-initializing @article before every test - # setting it to nil here is not essential but I hope - # you understand how you can use the teardown method - @article = nil + # when controller is using cache it may be a good idea to reset it afterwards + Rails.cache.clear end test "should show article" do @@ -769,6 +780,41 @@ end Similar to other callbacks in Rails, the `setup` and `teardown` methods can also be used by passing a block, lambda, or method name as a symbol to call. +### Test helpers + +To avoid code duplication, you can add your own test helpers. +Sign in helper can be a good example: + +```ruby +test/test_helper.rb + +module SignInHelper + def sign_in(user) + session[:user_id] = user.id + end +end + +class ActionController::TestCase + include SignInHelper +end +``` + +```ruby +require 'test_helper' + +class ProfileControllerTest < ActionController::TestCase + + test "should show profile" do + # helper is now reusable from any controller test case + sign_in users(:david) + + get :show + assert_response :success + assert_equal users(:david), assigns(:user) + end +end +``` + Testing Routes -------------- @@ -1050,9 +1096,10 @@ require 'test_helper' class UserMailerTest < ActionMailer::TestCase test "invite" do # Send the email, then test that it got queued - email = UserMailer.create_invite('me@example.com', - 'friend@example.com', Time.now).deliver_now - assert_not ActionMailer::Base.deliveries.empty? + assert_emails 1 do + email = UserMailer.create_invite('me@example.com', + 'friend@example.com', Time.now).deliver_now + end # Test the body of the sent email contains what we expect it to assert_equal ['me@example.com'], email.from diff --git a/guides/source/upgrading_ruby_on_rails.md b/guides/source/upgrading_ruby_on_rails.md index c0c94475e0..d7fbe575c2 100644 --- a/guides/source/upgrading_ruby_on_rails.md +++ b/guides/source/upgrading_ruby_on_rails.md @@ -1,4 +1,4 @@ -**DO NOT READ THIS FILE IN GITHUB, GUIDES ARE PUBLISHED IN http://guides.rubyonrails.org.** +**DO NOT READ THIS FILE ON GITHUB, GUIDES ARE PUBLISHED ON http://guides.rubyonrails.org.** A Guide for Upgrading Ruby on Rails =================================== diff --git a/guides/source/working_with_javascript_in_rails.md b/guides/source/working_with_javascript_in_rails.md index 5131f809d7..367abddcfa 100644 --- a/guides/source/working_with_javascript_in_rails.md +++ b/guides/source/working_with_javascript_in_rails.md @@ -1,4 +1,4 @@ -**DO NOT READ THIS FILE IN GITHUB, GUIDES ARE PUBLISHED IN http://guides.rubyonrails.org.** +**DO NOT READ THIS FILE ON GITHUB, GUIDES ARE PUBLISHED ON http://guides.rubyonrails.org.** Working with JavaScript in Rails ================================ |