diff options
Diffstat (limited to 'guides/source/initialization.md')
| -rw-r--r-- | guides/source/initialization.md | 307 |
1 files changed, 220 insertions, 87 deletions
diff --git a/guides/source/initialization.md b/guides/source/initialization.md index c78eef5bf0..00b2761716 100644 --- a/guides/source/initialization.md +++ b/guides/source/initialization.md @@ -29,9 +29,42 @@ quickly. Launch! ------- -Let's start to boot and initialize the app. It all begins with your app's -`bin/rails` executable. A Rails application is usually started by running -`rails console` or `rails server`. +Let's start to boot and initialize the app. A Rails application is usually +started by running `rails console` or `rails server`. + +### `railties/bin/rails` + +The `rails` in the command `rails server` is a ruby executable in your load +path. This executable contains the following lines: + +```ruby +version = ">= 0" +load Gem.bin_path('railties', 'rails', version) +``` + +If you try out this command in a Rails console, you would see that this loads +`railties/bin/rails`. A part of the file `railties/bin/rails.rb` has the +following code: + +```ruby +require "rails/cli" +``` + +The file `railties/lib/rails/cli` in turn calls +`Rails::AppRailsLoader.exec_app_rails`. + +### `railties/lib/rails/app_rails_loader.rb` + +The primary goal of the function `exec_app_rails` is to execute your app's +`bin/rails`. If the current directory does not have a `bin/rails`, it will +navigate upwards until it finds a `bin/rails` executable. Thus one can invoke a +`rails` command from anywhere inside a rails application. + +For `rails server` the equivalent of the following command is executed: + +```bash +$ exec ruby bin/rails server +``` ### `bin/rails` @@ -54,7 +87,7 @@ The `APP_PATH` constant will be used later in `rails/commands`. The `config/boot # Set up gems listed in the Gemfile. ENV['BUNDLE_GEMFILE'] ||= File.expand_path('../../Gemfile', __FILE__) -require 'bundler/setup' if File.exists?(ENV['BUNDLE_GEMFILE']) +require 'bundler/setup' if File.exist?(ENV['BUNDLE_GEMFILE']) ``` In a standard Rails application, there's a `Gemfile` which declares all @@ -93,7 +126,9 @@ A standard Rails application depends on several gems, specifically: ### `rails/commands.rb` -Once `config/boot.rb` has finished, the next file that is required is `rails/commands` which will execute a command based on the arguments passed in. In this case, the `ARGV` array simply contains `server` which is extracted into the `command` variable using these lines: +Once `config/boot.rb` has finished, the next file that is required is +`rails/commands`, which helps in expanding aliases. In the current case, the +`ARGV` array simply contains `server` which will be passed over: ```ruby ARGV << '--help' if ARGV.empty? @@ -109,21 +144,48 @@ aliases = { command = ARGV.shift command = aliases[command] || command + +require 'rails/commands/commands_tasks' + +Rails::CommandsTasks.new(ARGV).run_command!(command) ``` TIP: As you can see, an empty ARGV list will make Rails show the help snippet. -If we used `s` rather than `server`, Rails will use the `aliases` defined in the file and match them to their respective commands. With the `server` command, Rails will run this code: +If we had used `s` rather than `server`, Rails would have used the `aliases` +defined here to find the matching command. + +### `rails/commands/command_tasks.rb` + +When one types an incorrect rails command, the `run_command` is responsible for +throwing an error message. If the command is valid, a method of the same name +is called. ```ruby -when 'server' - # Change to the application's path if there is no config.ru file in current directory. - # This allows us to run `rails server` from other directories, but still get - # the main config.ru and properly set the tmp directory. - Dir.chdir(File.expand_path('../../', APP_PATH)) unless File.exists?(File.expand_path("config.ru")) +COMMAND_WHITELIST = %(plugin generate destroy console server dbconsole application runner new version help) + +def run_command!(command) + command = parse_command(command) + if COMMAND_WHITELIST.include?(command) + send(command) + else + write_error_message(command) + end +end +``` + +With the `server` command, Rails will further run the following code: + +```ruby +def set_application_directory! + Dir.chdir(File.expand_path('../../', APP_PATH)) unless File.exist?(File.expand_path("config.ru")) +end + +def server + set_application_directory! + require_command!("server") - require 'rails/commands/server' Rails::Server.new.tap do |server| # We need to require application after the server sets environment, # otherwise the --environment option given to the server won't propagate. @@ -131,14 +193,23 @@ when 'server' Dir.chdir(Rails.application.root) server.start end +end + +def require_command!(command) + require "rails/commands/#{command}" +end ``` -This file will change into the Rails root directory (a path two directories up from `APP_PATH` which points at `config/application.rb`), but only if the `config.ru` file isn't found. This then requires `rails/commands/server` which sets up the `Rails::Server` class. +This file will change into the Rails root directory (a path two directories up +from `APP_PATH` which points at `config/application.rb`), but only if the +`config.ru` file isn't found. This then requires `rails/commands/server` which +sets up the `Rails::Server` class. ```ruby require 'fileutils' require 'optparse' require 'action_dispatch' +require 'rails' module Rails class Server < ::Rack::Server @@ -202,10 +273,10 @@ def parse_options(args) options = default_options # Don't evaluate CGI ISINDEX parameters. - # http://hoohoo.ncsa.uiuc.edu/cgi/cl.html + # http://www.meb.uni-bonn.de/docs/cgi/cl.html args.clear if ENV.include?("REQUEST_METHOD") - options.merge! opt_parser.parse! args + options.merge! opt_parser.parse!(args) options[:config] = ::File.expand_path(options[:config]) ENV["RACK_ENV"] = options[:environment] options @@ -216,11 +287,14 @@ With the `default_options` set to this: ```ruby def default_options + environment = ENV['RACK_ENV'] || 'development' + default_host = environment == 'development' ? 'localhost' : '0.0.0.0' + { - :environment => ENV['RACK_ENV'] || "development", + :environment => environment, :pid => nil, :Port => 9292, - :Host => "0.0.0.0", + :Host => default_host, :AccessLog => [], :config => "config.ru" } @@ -261,37 +335,44 @@ and it's free for you to change based on your needs. ### `Rails::Server#start` -After `config/application` is loaded, `server.start` is called. This method is defined like this: +After `config/application` is loaded, `server.start` is called. This method is +defined like this: ```ruby def start - url = "#{options[:SSLEnable] ? 'https' : 'http'}://#{options[:Host]}:#{options[:Port]}" - puts "=> Booting #{ActiveSupport::Inflector.demodulize(server)}" - puts "=> Rails #{Rails.version} application starting in #{Rails.env} on #{url}" - puts "=> Run `rails server -h` for more startup options" + print_boot_information trap(:INT) { exit } - puts "=> Ctrl-C to shutdown server" unless options[:daemonize] + create_tmp_directories + log_to_stdout if options[:log_stdout] + + super + ... +end + +private - #Create required tmp directories if not found - %w(cache pids sessions sockets).each do |dir_to_make| - FileUtils.mkdir_p(Rails.root.join('tmp', dir_to_make)) + def print_boot_information + ... + puts "=> Run `rails server -h` for more startup options" + ... + puts "=> Ctrl-C to shutdown server" unless options[:daemonize] + end + + def create_tmp_directories + %w(cache pids sessions sockets).each do |dir_to_make| + FileUtils.mkdir_p(File.join(Rails.root, 'tmp', dir_to_make)) + end end - unless options[:daemonize] + def log_to_stdout wrapped_app # touch the app so the logger is set up console = ActiveSupport::Logger.new($stdout) console.formatter = Rails.logger.formatter + console.level = Rails.logger.level Rails.logger.extend(ActiveSupport::Logger.broadcast(console)) end - - super -ensure - # The '-h' option calls exit before @options is set. - # If we call 'options' with it unset, we get double help banners. - puts 'Exiting' unless @options && options[:daemonize] -end ``` This is where the first output of the Rails initialization happens. This @@ -360,7 +441,11 @@ The `app` method here is defined like so: ```ruby def app - @app ||= begin + @app ||= options[:builder] ? build_app_from_string : build_app_and_options_from_config +end +... +private + def build_app_and_options_from_config if !::File.exist? options[:config] abort "configuration #{options[:config]} not found" end @@ -369,7 +454,10 @@ def app self.options.merge! options app end -end + + def build_app_from_string + Rack::Builder.new_from_string(self.options[:builder]) + end ``` The `options[:config]` value defaults to `config.ru` which contains this: @@ -385,8 +473,14 @@ run <%= app_const %> The `Rack::Builder.parse_file` method here takes the content from this `config.ru` file and parses it using this code: ```ruby -app = eval "Rack::Builder.new {( " + cfgfile + "\n )}.to_app", - TOPLEVEL_BINDING, config +app = new_from_string cfgfile, config + +... + +def self.new_from_string(builder_script, file="(rackup)") + eval "Rack::Builder.new {\n" + builder_script + "\n}.to_app", + TOPLEVEL_BINDING, file, 0 +end ``` The `initialize` method of `Rack::Builder` will take the block here and execute it within an instance of `Rack::Builder`. This is where the majority of the initialization process of Rails happens. The `require` line for `config/environment.rb` in `config.ru` is the first to run: @@ -399,11 +493,22 @@ require ::File.expand_path('../config/environment', __FILE__) This file is the common file required by `config.ru` (`rails server`) and Passenger. This is where these two ways to run the server meet; everything before this point has been Rack and Rails setup. -This file begins with requiring `config/application.rb`. +This file begins with requiring `config/application.rb`: + +```ruby +require File.expand_path('../application', __FILE__) +``` ### `config/application.rb` -This file requires `config/boot.rb`, but only if it hasn't been required before, which would be the case in `rails server` but **wouldn't** be the case with Passenger. +This file requires `config/boot.rb`: + +```ruby +require File.expand_path('../boot', __FILE__) +``` + +But only if it hasn't been required before, which would be the case in `rails server` +but **wouldn't** be the case with Passenger. Then the fun begins! @@ -424,11 +529,12 @@ This file is responsible for requiring all the individual frameworks of Rails: require "rails" %w( - active_record - action_controller - action_mailer - rails/test_unit - sprockets + active_record + action_controller + action_view + action_mailer + rails/test_unit + sprockets ).each do |framework| begin require "#{framework}/railtie" @@ -448,11 +554,11 @@ I18n and Rails configuration are all being defined here. ### Back to `config/environment.rb` The rest of `config/application.rb` defines the configuration for the -`Rails::Application` which will be used once the application is fully +`Rails::Application` which will be used once the application is fully initialized. When `config/application.rb` has finished loading Rails and defined the application namespace, we go back to `config/environment.rb`, where the application is initialized. For example, if the application was called -`Blog`, here we would find `Blog::Application.initialize!`, which is +`Blog`, here we would find `Rails.application.initialize!`, which is defined in `rails/application.rb` ### `railties/lib/rails/application.rb` @@ -468,14 +574,24 @@ def initialize!(group=:default) #:nodoc: end ``` -As you can see, you can only initialize an app once. This is also where the initializers are run. +As you can see, you can only initialize an app once. The initializers are run through +the `run_initializers` method which is defined in `railties/lib/rails/initializable.rb` -TODO: review this +```ruby +def run_initializers(group=:default, *args) + return if instance_variable_defined?(:@ran) + initializers.tsort_each do |initializer| + initializer.run(*args) if initializer.belongs_to?(group) + end + @ran = true +end +``` -The initializers code itself is tricky. What Rails is doing here is it -traverses all the class ancestors looking for an `initializers` method, -sorting them and running them. For example, the `Engine` class will make -all the engines available by providing the `initializers` method. +The `run_initializers` code itself is tricky. What Rails is doing here is +traversing all the class ancestors looking for those that respond to an +`initializers` method. It then sorts the ancestors by name, and runs them. +For example, the `Engine` class will make all the engines available by +providing an `initializers` method on them. The `Rails::Application` class, as defined in `railties/lib/rails/application.rb` defines `bootstrap`, `railtie`, and `finisher` initializers. The `bootstrap` initializers @@ -484,7 +600,7 @@ initializers (like building the middleware stack) are run last. The `railtie` initializers are the initializers which have been defined on the `Rails::Application` itself and are run between the `bootstrap` and `finishers`. -After this is done we go back to `Rack::Server` +After this is done we go back to `Rack::Server`. ### Rack: lib/rack/server.rb @@ -492,7 +608,11 @@ Last time we left when the `app` method was being defined: ```ruby def app - @app ||= begin + @app ||= options[:builder] ? build_app_from_string : build_app_and_options_from_config +end +... +private + def build_app_and_options_from_config if !::File.exist? options[:config] abort "configuration #{options[:config]} not found" end @@ -501,7 +621,10 @@ def app self.options.merge! options app end -end + + def build_app_from_string + Rack::Builder.new_from_string(self.options[:builder]) + end ``` At this point `app` is the Rails app itself (a middleware), and what @@ -519,7 +642,7 @@ def build_app(app) end ``` -Remember, `build_app` was called (by wrapped_app) in the last line of `Server#start`. +Remember, `build_app` was called (by `wrapped_app`) in the last line of `Server#start`. Here's how it looked like when we left: ```ruby @@ -527,40 +650,50 @@ server.run wrapped_app, options, &blk ``` At this point, the implementation of `server.run` will depend on the -server you're using. For example, if you were using Mongrel, here's what +server you're using. For example, if you were using Puma, here's what the `run` method would look like: ```ruby -def self.run(app, options={}) - server = ::Mongrel::HttpServer.new( - options[:Host] || '0.0.0.0', - options[:Port] || 8080, - options[:num_processors] || 950, - options[:throttle] || 0, - options[:timeout] || 60) - # Acts like Rack::URLMap, utilizing Mongrel's own path finding methods. - # Use is similar to #run, replacing the app argument with a hash of - # { path=>app, ... } or an instance of Rack::URLMap. - if options[:map] - if app.is_a? Hash - app.each do |path, appl| - path = '/'+path unless path[0] == ?/ - server.register(path, Rack::Handler::Mongrel.new(appl)) - end - elsif app.is_a? URLMap - app.instance_variable_get(:@mapping).each do |(host, path, appl)| - next if !host.nil? && !options[:Host].nil? && options[:Host] != host - path = '/'+path unless path[0] == ?/ - server.register(path, Rack::Handler::Mongrel.new(appl)) - end - else - raise ArgumentError, "first argument should be a Hash or URLMap" - end - else - server.register('/', Rack::Handler::Mongrel.new(app)) +... +DEFAULT_OPTIONS = { + :Host => '0.0.0.0', + :Port => 8080, + :Threads => '0:16', + :Verbose => false +} + +def self.run(app, options = {}) + options = DEFAULT_OPTIONS.merge(options) + + if options[:Verbose] + app = Rack::CommonLogger.new(app, STDOUT) + end + + if options[:environment] + ENV['RACK_ENV'] = options[:environment].to_s end + + server = ::Puma::Server.new(app) + min, max = options[:Threads].split(':', 2) + + puts "Puma #{::Puma::Const::PUMA_VERSION} starting..." + puts "* Min threads: #{min}, max threads: #{max}" + puts "* Environment: #{ENV['RACK_ENV']}" + puts "* Listening on tcp://#{options[:Host]}:#{options[:Port]}" + + server.add_tcp_listener options[:Host], options[:Port] + server.min_threads = min + server.max_threads = max yield server if block_given? - server.run.join + + begin + server.run.join + rescue Interrupt + puts "* Gracefully stopping, waiting for requests to finish" + server.stop(true) + puts "* Goodbye!" + end + end ``` @@ -570,4 +703,4 @@ the last piece of our journey in the Rails initialization process. This high level overview will help you understand when your code is executed and how, and overall become a better Rails developer. If you still want to know more, the Rails source code itself is probably the -best place to go next. +best place to go next.
\ No newline at end of file |