diff options
Diffstat (limited to '.ddev/config.yaml')
| -rw-r--r-- | .ddev/config.yaml | 276 |
1 files changed, 276 insertions, 0 deletions
diff --git a/.ddev/config.yaml b/.ddev/config.yaml new file mode 100644 index 0000000..15592ff --- /dev/null +++ b/.ddev/config.yaml @@ -0,0 +1,276 @@ +name: faktura +type: php +docroot: "" +php_version: "8.1" +webserver_type: nginx-fpm +xdebug_enabled: false +additional_hostnames: [] +additional_fqdns: [] +database: + type: postgres + version: "16" +use_dns_when_possible: true +composer_version: "2" +web_environment: [] +webimage_extra_packages: [libpq-dev] + +# Key features of DDEV's config.yaml: + +# name: <projectname> # Name of the project, automatically provides +# http://projectname.ddev.site and https://projectname.ddev.site + +# type: <projecttype> # backdrop, craftcms, django4, drupal6/7/8/9/10, laravel, magento, magento2, php, python, shopware6, silverstripe, typo3, wordpress +# See https://ddev.readthedocs.io/en/latest/users/quickstart/ for more +# information on the different project types + +# docroot: <relative_path> # Relative path to the directory containing index.php. + +# php_version: "8.1" # PHP version to use, "5.6", "7.0", "7.1", "7.2", "7.3", "7.4", "8.0", "8.1", "8.2", "8.3" + +# You can explicitly specify the webimage but this +# is not recommended, as the images are often closely tied to DDEV's' behavior, +# so this can break upgrades. + +# webimage: <docker_image> # nginx/php docker image. + +# database: +# type: <dbtype> # mysql, mariadb, postgres +# version: <version> # database version, like "10.4" or "8.0" +# MariaDB versions can be 5.5-10.8 and 10.11, MySQL versions can be 5.5-8.0 +# PostgreSQL versions can be 9-16. + +# router_http_port: <port> # Port to be used for http (defaults to global configuration, usually 80) +# router_https_port: <port> # Port for https (defaults to global configuration, usually 443) + +# xdebug_enabled: false # Set to true to enable Xdebug and "ddev start" or "ddev restart" +# Note that for most people the commands +# "ddev xdebug" to enable Xdebug and "ddev xdebug off" to disable it work better, +# as leaving Xdebug enabled all the time is a big performance hit. + +# xhprof_enabled: false # Set to true to enable Xhprof and "ddev start" or "ddev restart" +# Note that for most people the commands +# "ddev xhprof" to enable Xhprof and "ddev xhprof off" to disable it work better, +# as leaving Xhprof enabled all the time is a big performance hit. + +# webserver_type: nginx-fpm, apache-fpm, or nginx-gunicorn + +# timezone: Europe/Berlin +# This is the timezone used in the containers and by PHP; +# it can be set to any valid timezone, +# see https://en.wikipedia.org/wiki/List_of_tz_database_time_zones +# For example Europe/Dublin or MST7MDT + +# composer_root: <relative_path> +# Relative path to the Composer root directory from the project root. This is +# the directory which contains the composer.json and where all Composer related +# commands are executed. + +# composer_version: "2" +# You can set it to "" or "2" (default) for Composer v2 or "1" for Composer v1 +# to use the latest major version available at the time your container is built. +# It is also possible to use each other Composer version channel. This includes: +# - 2.2 (latest Composer LTS version) +# - stable +# - preview +# - snapshot +# Alternatively, an explicit Composer version may be specified, for example "2.2.18". +# To reinstall Composer after the image was built, run "ddev debug refresh". + +# nodejs_version: "18" +# change from the default system Node.js version to any other version. +# Numeric version numbers can be complete (i.e. 18.15.0) or +# incomplete (18, 17.2, 16). 'lts' and 'latest' can be used as well along with +# other named releases. +# see https://www.npmjs.com/package/n#specifying-nodejs-versions +# Note that you can continue using 'ddev nvm' or nvm inside the web container +# to change the project's installed node version if you need to. + +# additional_hostnames: +# - somename +# - someothername +# would provide http and https URLs for "somename.ddev.site" +# and "someothername.ddev.site". + +# additional_fqdns: +# - example.com +# - sub1.example.com +# would provide http and https URLs for "example.com" and "sub1.example.com" +# Please take care with this because it can cause great confusion. + +# upload_dirs: "custom/upload/dir" +# +# upload_dirs: +# - custom/upload/dir +# - ../private +# +# would set the destination paths for ddev import-files to <docroot>/custom/upload/dir +# When Mutagen is enabled this path is bind-mounted so that all the files +# in the upload_dirs don't have to be synced into Mutagen. + +# disable_upload_dirs_warning: false +# If true, turns off the normal warning that says +# "You have Mutagen enabled and your 'php' project type doesn't have upload_dirs set" + +# ddev_version_constraint: "" +# Example: +# ddev_version_constraint: ">= 1.22.4" +# This will enforce that the running ddev version is within this constraint. +# See https://github.com/Masterminds/semver#checking-version-constraints for +# supported constraint formats + +# working_dir: +# web: /var/www/html +# db: /home +# would set the default working directory for the web and db services. +# These values specify the destination directory for ddev ssh and the +# directory in which commands passed into ddev exec are run. + +# omit_containers: [db, ddev-ssh-agent] +# Currently only these containers are supported. Some containers can also be +# omitted globally in the ~/.ddev/global_config.yaml. Note that if you omit +# the "db" container, several standard features of DDEV that access the +# database container will be unusable. In the global configuration it is also +# possible to omit ddev-router, but not here. + +# performance_mode: "global" +# DDEV offers performance optimization strategies to improve the filesystem +# performance depending on your host system. Should be configured globally. +# +# If set, will override the global config. Possible values are: +# - "global": uses the value from the global config. +# - "none": disables performance optimization for this project. +# - "mutagen": enables Mutagen for this project. +# - "nfs": enables NFS for this project. +# +# See https://ddev.readthedocs.io/en/latest/users/install/performance/#nfs +# See https://ddev.readthedocs.io/en/latest/users/install/performance/#mutagen + +# fail_on_hook_fail: False +# Decide whether 'ddev start' should be interrupted by a failing hook + +# host_https_port: "59002" +# The host port binding for https can be explicitly specified. It is +# dynamic unless otherwise specified. +# This is not used by most people, most people use the *router* instead +# of the localhost port. + +# host_webserver_port: "59001" +# The host port binding for the ddev-webserver can be explicitly specified. It is +# dynamic unless otherwise specified. +# This is not used by most people, most people use the *router* instead +# of the localhost port. + +# host_db_port: "59002" +# The host port binding for the ddev-dbserver can be explicitly specified. It is dynamic +# unless explicitly specified. + +# mailpit_http_port: "8025" +# mailpit_https_port: "8026" +# The Mailpit ports can be changed from the default 8025 and 8026 + +# host_mailpit_port: "8025" +# The mailpit port is not normally bound on the host at all, instead being routed +# through ddev-router, but it can be bound directly to localhost if specified here. + +# webimage_extra_packages: [php7.4-tidy, php-bcmath] +# Extra Debian packages that are needed in the webimage can be added here + +# dbimage_extra_packages: [telnet,netcat] +# Extra Debian packages that are needed in the dbimage can be added here + +# use_dns_when_possible: true +# If the host has internet access and the domain configured can +# successfully be looked up, DNS will be used for hostname resolution +# instead of editing /etc/hosts +# Defaults to true + +# project_tld: ddev.site +# The top-level domain used for project URLs +# The default "ddev.site" allows DNS lookup via a wildcard +# If you prefer you can change this to "ddev.local" to preserve +# pre-v1.9 behavior. + +# ngrok_args: --basic-auth username:pass1234 +# Provide extra flags to the "ngrok http" command, see +# https://ngrok.com/docs/ngrok-agent/config or run "ngrok http -h" + +# disable_settings_management: false +# If true, DDEV will not create CMS-specific settings files like +# Drupal's settings.php/settings.ddev.php or TYPO3's AdditionalConfiguration.php +# In this case the user must provide all such settings. + +# You can inject environment variables into the web container with: +# web_environment: +# - SOMEENV=somevalue +# - SOMEOTHERENV=someothervalue + +# no_project_mount: false +# (Experimental) If true, DDEV will not mount the project into the web container; +# the user is responsible for mounting it manually or via a script. +# This is to enable experimentation with alternate file mounting strategies. +# For advanced users only! + +# bind_all_interfaces: false +# If true, host ports will be bound on all network interfaces, +# not the localhost interface only. This means that ports +# will be available on the local network if the host firewall +# allows it. + +# default_container_timeout: 120 +# The default time that DDEV waits for all containers to become ready can be increased from +# the default 120. This helps in importing huge databases, for example. + +#web_extra_exposed_ports: +#- name: nodejs +# container_port: 3000 +# http_port: 2999 +# https_port: 3000 +#- name: something +# container_port: 4000 +# https_port: 4000 +# http_port: 3999 +# Allows a set of extra ports to be exposed via ddev-router +# Fill in all three fields even if you don’t intend to use the https_port! +# If you don’t add https_port, then it defaults to 0 and ddev-router will fail to start. +# +# The port behavior on the ddev-webserver must be arranged separately, for example +# using web_extra_daemons. +# For example, with a web app on port 3000 inside the container, this config would +# expose that web app on https://<project>.ddev.site:9999 and http://<project>.ddev.site:9998 +# web_extra_exposed_ports: +# - name: myapp +# container_port: 3000 +# http_port: 9998 +# https_port: 9999 + +#web_extra_daemons: +#- name: "http-1" +# command: "/var/www/html/node_modules/.bin/http-server -p 3000" +# directory: /var/www/html +#- name: "http-2" +# command: "/var/www/html/node_modules/.bin/http-server /var/www/html/sub -p 3000" +# directory: /var/www/html + +# override_config: false +# By default, config.*.yaml files are *merged* into the configuration +# But this means that some things can't be overridden +# For example, if you have 'use_dns_when_possible: true'' you can't override it with a merge +# and you can't erase existing hooks or all environment variables. +# However, with "override_config: true" in a particular config.*.yaml file, +# 'use_dns_when_possible: false' can override the existing values, and +# hooks: +# post-start: [] +# or +# web_environment: [] +# or +# additional_hostnames: [] +# can have their intended affect. 'override_config' affects only behavior of the +# config.*.yaml file it exists in. + +# Many DDEV commands can be extended to run tasks before or after the +# DDEV command is executed, for example "post-start", "post-import-db", +# "pre-composer", "post-composer" +# See https://ddev.readthedocs.io/en/stable/users/extend/custom-commands/ for more +# information on the commands that can be extended and the tasks you can define +# for them. Example: +#hooks: |