path: root/vendor/sabre/dav/docs/rfc5545.txt

Network Working Group                               B. Desruisseaux, Ed.
Request for Comments: 5545                                        Oracle
Obsoletes: 2445                                           September 2009
Category: Standards Track


     Internet Calendaring and Scheduling Core Object Specification
                              (iCalendar)

Abstract

This document defines the iCalendar data format for representing and
exchanging calendaring and scheduling information such as events,
to-dos, journal entries, and free/busy information, independent of any
particular calendar service or protocol.

Status of This Memo

   This document specifies an Internet standards track protocol for the
   Internet community, and requests discussion and suggestions for
   improvements.  Please refer to the current edition of the "Internet
   Official Protocol Standards" (STD 1) for the standardization state
   and status of this protocol.  Distribution of this memo is unlimited.

Copyright and License Notice

   Copyright (c) 2009 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the BSD License.

   This document may contain material from IETF Documents or IETF
   Contributions published or made publicly available before November
   10, 2008.  The person(s) controlling the copyright in some of this
   material may not have granted the IETF Trust the right to allow
   modifications of such material outside the IETF Standards Process.
   Without obtaining an adequate license from the person(s) controlling
   the copyright in such materials, this document may not be modified
   outside the IETF Standards Process, and derivative works of it may
   not be created outside the IETF Standards Process, except to format



Desruisseaux                Standards Track                     [Page 1]

RFC 5545                       iCalendar                  September 2009


   it for publication as an RFC or to translate it into languages other
   than English.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   5
   2.  Basic Grammar and Conventions . . . . . . . . . . . . . . . .   6
     2.1.  Formatting Conventions  . . . . . . . . . . . . . . . . .   6
     2.2.  Related Memos . . . . . . . . . . . . . . . . . . . . . .   7
   3.  iCalendar Object Specification  . . . . . . . . . . . . . . .   8
     3.1.  Content Lines . . . . . . . . . . . . . . . . . . . . . .   8
       3.1.1.  List and Field Separators . . . . . . . . . . . . . .  11
       3.1.2.  Multiple Values . . . . . . . . . . . . . . . . . . .  11
       3.1.3.  Binary Content  . . . . . . . . . . . . . . . . . . .  11
       3.1.4.  Character Set . . . . . . . . . . . . . . . . . . . .  12
     3.2.  Property Parameters . . . . . . . . . . . . . . . . . . .  12
       3.2.1.  Alternate Text Representation . . . . . . . . . . . .  13
       3.2.2.  Common Name . . . . . . . . . . . . . . . . . . . . .  15
       3.2.3.  Calendar User Type  . . . . . . . . . . . . . . . . .  15
       3.2.4.  Delegators  . . . . . . . . . . . . . . . . . . . . .  16
       3.2.5.  Delegatees  . . . . . . . . . . . . . . . . . . . . .  16
       3.2.6.  Directory Entry Reference . . . . . . . . . . . . . .  17
       3.2.7.  Inline Encoding . . . . . . . . . . . . . . . . . . .  17
       3.2.8.  Format Type . . . . . . . . . . . . . . . . . . . . .  18
       3.2.9.  Free/Busy Time Type . . . . . . . . . . . . . . . . .  19
       3.2.10. Language  . . . . . . . . . . . . . . . . . . . . . .  20
       3.2.11. Group or List Membership  . . . . . . . . . . . . . .  20
       3.2.12. Participation Status  . . . . . . . . . . . . . . . .  21
       3.2.13. Recurrence Identifier Range . . . . . . . . . . . . .  22
       3.2.14. Alarm Trigger Relationship  . . . . . . . . . . . . .  23
       3.2.15. Relationship Type . . . . . . . . . . . . . . . . . .  24
       3.2.16. Participation Role  . . . . . . . . . . . . . . . . .  25
       3.2.17. RSVP Expectation  . . . . . . . . . . . . . . . . . .  25
       3.2.18. Sent By . . . . . . . . . . . . . . . . . . . . . . .  26
       3.2.19. Time Zone Identifier  . . . . . . . . . . . . . . . .  26
       3.2.20. Value Data Types  . . . . . . . . . . . . . . . . . .  28
     3.3.  Property Value Data Types . . . . . . . . . . . . . . . .  29
       3.3.1.  Binary  . . . . . . . . . . . . . . . . . . . . . . .  29
       3.3.2.  Boolean . . . . . . . . . . . . . . . . . . . . . . .  30
       3.3.3.  Calendar User Address . . . . . . . . . . . . . . . .  30
       3.3.4.  Date  . . . . . . . . . . . . . . . . . . . . . . . .  31
       3.3.5.  Date-Time . . . . . . . . . . . . . . . . . . . . . .  31
       3.3.6.  Duration  . . . . . . . . . . . . . . . . . . . . . .  34
       3.3.7.  Float . . . . . . . . . . . . . . . . . . . . . . . .  35
       3.3.8.  Integer . . . . . . . . . . . . . . . . . . . . . . .  35
       3.3.9.  Period of Time  . . . . . . . . . . . . . . . . . . .  36
       3.3.10. Recurrence Rule . . . . . . . . . . . . . . . . . . .  37
       3.3.11. Text  . . . . . . . . . . . . . . . . . . . . . . . .  45



Desruisseaux                Standards Track                     [Page 2]

RFC 5545                       iCalendar                  September 2009


       3.3.12. Time  . . . . . . . . . . . . . . . . . . . . . . . .  46
       3.3.13. URI . . . . . . . . . . . . . . . . . . . . . . . . .  48
       3.3.14. UTC Offset  . . . . . . . . . . . . . . . . . . . . .  49
     3.4.  iCalendar Object  . . . . . . . . . . . . . . . . . . . .  49
     3.5.  Property  . . . . . . . . . . . . . . . . . . . . . . . .  50
     3.6.  Calendar Components . . . . . . . . . . . . . . . . . . .  50
       3.6.1.  Event Component . . . . . . . . . . . . . . . . . . .  52
       3.6.2.  To-Do Component . . . . . . . . . . . . . . . . . . .  56
       3.6.3.  Journal Component . . . . . . . . . . . . . . . . . .  58
       3.6.4.  Free/Busy Component . . . . . . . . . . . . . . . . .  60
       3.6.5.  Time Zone Component . . . . . . . . . . . . . . . . .  63
       3.6.6.  Alarm Component . . . . . . . . . . . . . . . . . . .  72
     3.7.  Calendar Properties . . . . . . . . . . . . . . . . . . .  77
       3.7.1.  Calendar Scale  . . . . . . . . . . . . . . . . . . .  77
       3.7.2.  Method  . . . . . . . . . . . . . . . . . . . . . . .  78
       3.7.3.  Product Identifier  . . . . . . . . . . . . . . . . .  79
       3.7.4.  Version . . . . . . . . . . . . . . . . . . . . . . .  80
     3.8.  Component Properties  . . . . . . . . . . . . . . . . . .  81
       3.8.1.  Descriptive Component Properties  . . . . . . . . . .  81
         3.8.1.1.  Attachment  . . . . . . . . . . . . . . . . . . .  81
         3.8.1.2.  Categories  . . . . . . . . . . . . . . . . . . .  82
         3.8.1.3.  Classification  . . . . . . . . . . . . . . . . .  83
         3.8.1.4.  Comment . . . . . . . . . . . . . . . . . . . . .  84
         3.8.1.5.  Description . . . . . . . . . . . . . . . . . . .  85
         3.8.1.6.  Geographic Position . . . . . . . . . . . . . . .  87
         3.8.1.7.  Location  . . . . . . . . . . . . . . . . . . . .  88
         3.8.1.8.  Percent Complete  . . . . . . . . . . . . . . . .  89
         3.8.1.9.  Priority  . . . . . . . . . . . . . . . . . . . .  90
         3.8.1.10. Resources . . . . . . . . . . . . . . . . . . . .  92
         3.8.1.11. Status  . . . . . . . . . . . . . . . . . . . . .  93
         3.8.1.12. Summary . . . . . . . . . . . . . . . . . . . . .  94
       3.8.2.  Date and Time Component Properties  . . . . . . . . .  95
         3.8.2.1.  Date-Time Completed . . . . . . . . . . . . . . .  95
         3.8.2.2.  Date-Time End . . . . . . . . . . . . . . . . . .  96
         3.8.2.3.  Date-Time Due . . . . . . . . . . . . . . . . . .  97
         3.8.2.4.  Date-Time Start . . . . . . . . . . . . . . . . .  99
         3.8.2.5.  Duration  . . . . . . . . . . . . . . . . . . . . 100
         3.8.2.6.  Free/Busy Time  . . . . . . . . . . . . . . . . . 101
         3.8.2.7.  Time Transparency . . . . . . . . . . . . . . . . 102
       3.8.3.  Time Zone Component Properties  . . . . . . . . . . . 103
         3.8.3.1.  Time Zone Identifier  . . . . . . . . . . . . . . 103
         3.8.3.2.  Time Zone Name  . . . . . . . . . . . . . . . . . 105
         3.8.3.3.  Time Zone Offset From . . . . . . . . . . . . . . 106
         3.8.3.4.  Time Zone Offset To . . . . . . . . . . . . . . . 106
         3.8.3.5.  Time Zone URL . . . . . . . . . . . . . . . . . . 107
       3.8.4.  Relationship Component Properties . . . . . . . . . . 108
         3.8.4.1.  Attendee  . . . . . . . . . . . . . . . . . . . . 108
         3.8.4.2.  Contact . . . . . . . . . . . . . . . . . . . . . 111



Desruisseaux                Standards Track                     [Page 3]

RFC 5545                       iCalendar                  September 2009


         3.8.4.3.  Organizer . . . . . . . . . . . . . . . . . . . . 113
         3.8.4.4.  Recurrence ID . . . . . . . . . . . . . . . . . . 114
         3.8.4.5.  Related To  . . . . . . . . . . . . . . . . . . . 117
         3.8.4.6.  Uniform Resource Locator  . . . . . . . . . . . . 118
         3.8.4.7.  Unique Identifier . . . . . . . . . . . . . . . . 119
       3.8.5.  Recurrence Component Properties . . . . . . . . . . . 120
         3.8.5.1.  Exception Date-Times  . . . . . . . . . . . . . . 120
         3.8.5.2.  Recurrence Date-Times . . . . . . . . . . . . . . 122
         3.8.5.3.  Recurrence Rule . . . . . . . . . . . . . . . . . 124
       3.8.6.  Alarm Component Properties  . . . . . . . . . . . . . 134
         3.8.6.1.  Action  . . . . . . . . . . . . . . . . . . . . . 134
         3.8.6.2.  Repeat Count  . . . . . . . . . . . . . . . . . . 135
         3.8.6.3.  Trigger . . . . . . . . . . . . . . . . . . . . . 135
       3.8.7.  Change Management Component Properties  . . . . . . . 138
         3.8.7.1.  Date-Time Created . . . . . . . . . . . . . . . . 138
         3.8.7.2.  Date-Time Stamp . . . . . . . . . . . . . . . . . 139
         3.8.7.3.  Last Modified . . . . . . . . . . . . . . . . . . 140
         3.8.7.4.  Sequence Number . . . . . . . . . . . . . . . . . 141
       3.8.8.  Miscellaneous Component Properties  . . . . . . . . . 142
         3.8.8.1.  IANA Properties . . . . . . . . . . . . . . . . . 142
         3.8.8.2.  Non-Standard Properties . . . . . . . . . . . . . 142
         3.8.8.3.  Request Status  . . . . . . . . . . . . . . . . . 144
   4.  iCalendar Object Examples . . . . . . . . . . . . . . . . . . 146
   5.  Recommended Practices . . . . . . . . . . . . . . . . . . . . 150
   6.  Internationalization Considerations . . . . . . . . . . . . . 151
   7.  Security Considerations . . . . . . . . . . . . . . . . . . . 151
   8.  IANA Considerations . . . . . . . . . . . . . . . . . . . . . 151
     8.1.  iCalendar Media Type Registration . . . . . . . . . . . . 151
     8.2.  New iCalendar Elements Registration . . . . . . . . . . . 155
       8.2.1.  iCalendar Elements Registration Procedure . . . . . . 155
       8.2.2.  Registration Template for Components  . . . . . . . . 155
       8.2.3.  Registration Template for Properties  . . . . . . . . 156
       8.2.4.  Registration Template for Parameters  . . . . . . . . 156
       8.2.5.  Registration Template for Value Data Types  . . . . . 157
       8.2.6.  Registration Template for Values  . . . . . . . . . . 157
     8.3.  Initial iCalendar Elements Registries . . . . . . . . . . 158
       8.3.1.  Components Registry . . . . . . . . . . . . . . . . . 158
       8.3.2.  Properties Registry . . . . . . . . . . . . . . . . . 158
       8.3.3.  Parameters Registry . . . . . . . . . . . . . . . . . 161
       8.3.4.  Value Data Types Registry . . . . . . . . . . . . . . 162
       8.3.5.  Calendar User Types Registry  . . . . . . . . . . . . 162
       8.3.6.  Free/Busy Time Types Registry . . . . . . . . . . . . 163
       8.3.7.  Participation Statuses Registry . . . . . . . . . . . 163
       8.3.8.  Relationship Types Registry . . . . . . . . . . . . . 164
       8.3.9.  Participation Roles Registry  . . . . . . . . . . . . 164
       8.3.10. Actions Registry  . . . . . . . . . . . . . . . . . . 165
       8.3.11. Classifications Registry  . . . . . . . . . . . . . . 165
       8.3.12. Methods Registry  . . . . . . . . . . . . . . . . . . 165



Desruisseaux                Standards Track                     [Page 4]

RFC 5545                       iCalendar                  September 2009


   9.  Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 165
   10. References  . . . . . . . . . . . . . . . . . . . . . . . . . 166
     10.1. Normative References  . . . . . . . . . . . . . . . . . . 166
     10.2. Informative References  . . . . . . . . . . . . . . . . . 167
   Appendix A.  Differences from RFC 2445  . . . . . . . . . . . . . 169
     A.1.  New Restrictions  . . . . . . . . . . . . . . . . . . . . 169
     A.2.  Restrictions Removed  . . . . . . . . . . . . . . . . . . 169
     A.3.  Deprecated Features . . . . . . . . . . . . . . . . . . . 169

1.  Introduction

   The use of calendaring and scheduling has grown considerably in the
   last decade.  Enterprise and inter-enterprise business has become
   dependent on rapid scheduling of events and actions using this
   information technology.  This memo is intended to progress the level
   of interoperability possible between dissimilar calendaring and
   scheduling applications.  This memo defines a MIME content type for
   exchanging electronic calendaring and scheduling information.  The
   Internet Calendaring and Scheduling Core Object Specification, or
   iCalendar, allows for the capture and exchange of information
   normally stored within a calendaring and scheduling application; such
   as a Personal Information Manager (PIM) or a Group-Scheduling
   product.

   The iCalendar format is suitable as an exchange format between
   applications or systems.  The format is defined in terms of a MIME
   content type.  This will enable the object to be exchanged using
   several transports, including but not limited to SMTP, HTTP, a file
   system, desktop interactive protocols such as the use of a memory-
   based clipboard or drag/drop interactions, point-to-point
   asynchronous communication, wired-network transport, or some form of
   unwired transport such as infrared.

   The memo also provides for the definition of iCalendar object methods
   that will map this content type to a set of messages for supporting
   calendaring and scheduling operations such as requesting, replying
   to, modifying, and canceling meetings or appointments, to-dos, and
   journal entries.  The iCalendar object methods can be used to define
   other calendaring and scheduling operations such as requesting for
   and replying with free/busy time data.  Such a scheduling protocol is
   defined in the iCalendar Transport-independent Interoperability
   Protocol (iTIP) defined in [2446bis].

   The memo also includes a formal grammar for the content type based on
   the Internet ABNF defined in [RFC5234].  This ABNF is required for
   the implementation of parsers and to serve as the definitive
   reference when ambiguities or questions arise in interpreting the
   descriptive prose definition of the memo.  Additional restrictions



Desruisseaux                Standards Track                     [Page 5]

RFC 5545                       iCalendar                  September 2009


   that could not easily be expressed with the ABNF syntax are specified
   as comments in the ABNF.  Comments with normative statements should
   be treated as such.

2.  Basic Grammar and Conventions

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [RFC2119].

   This memo makes use of both a descriptive prose and a more formal
   notation for defining the calendaring and scheduling format.

   The notation used in this memo is the ABNF notation of [RFC5234].
   Readers intending on implementing the format defined in this memo
   should be familiar with this notation in order to properly interpret
   the specifications of this memo.

   All numeric values used in this memo are given in decimal notation.

   All names of properties, property parameters, enumerated property
   values, and property parameter values are case-insensitive.  However,
   all other property values are case-sensitive, unless otherwise
   stated.

      Note: All indented editorial notes, such as this one, are intended
      to provide the reader with additional information.  The
      information is not essential to the building of an implementation
      conformant with this memo.  The information is provided to
      highlight a particular feature or characteristic of the memo.

   The format for the iCalendar object is based on the syntax of the
   text/directory media type [RFC2425].  While the iCalendar object is
   not a profile of the text/directory media type [RFC2425], it does
   reuse a number of the elements from the [RFC2425] specification.

2.1.  Formatting Conventions

   The elements defined in this memo are defined in prose.  Many of the
   terms used to describe these have common usage that is different than
   the standards usage of this memo.  In order to reference, within this
   memo, elements of the calendaring and scheduling model, core object
   (this memo), or interoperability protocol [2446bis] some formatting
   conventions have been used.  Calendaring and scheduling roles are
   referred to in quoted-strings of text with the first character of
   each word in uppercase.  For example, "Organizer" refers to a role of
   a "Calendar User" within the scheduling protocol defined by
   [2446bis].  Calendar components defined by this memo are referred to



Desruisseaux                Standards Track                     [Page 6]

RFC 5545                       iCalendar                  September 2009


   with capitalized, quoted-strings of text.  All calendar components
   start with the letter "V".  For example, "VEVENT" refers to the event
   calendar component, "VTODO" refers to the to-do calendar component,
   and "VJOURNAL" refers to the daily journal calendar component.
   Scheduling methods defined by iTIP [2446bis] are referred to with
   capitalized, quoted-strings of text.  For example, "REQUEST" refers
   to the method for requesting a scheduling calendar component be
   created or modified, and "REPLY" refers to the method a recipient of
   a request uses to update their status with the "Organizer" of the
   calendar component.

   The properties defined by this memo are referred to with capitalized,
   quoted-strings of text, followed by the word "property".  For
   example, "ATTENDEE" property refers to the iCalendar property used to
   convey the calendar address of a calendar user.  Property parameters
   defined by this memo are referred to with lowercase, quoted-strings
   of text, followed by the word "parameter".  For example, "value"
   parameter refers to the iCalendar property parameter used to override
   the default value type for a property value.  Enumerated values
   defined by this memo are referred to with capitalized text, either
   alone or followed by the word "value".  For example, the "MINUTELY"
   value can be used with the "FREQ" component of the "RECUR" value type
   to specify repeating components based on an interval of one minute or
   more.

   The following table lists the different characters from the
   [US-ASCII] character set that is referenced in this document.  For
   each character, the table specifies the character name used
   throughout this document, along with its US-ASCII decimal codepoint.






















Desruisseaux                Standards Track                     [Page 7]

RFC 5545                       iCalendar                  September 2009


              +------------------------+-------------------+
              | Character name         | Decimal codepoint |
              +------------------------+-------------------+
              | HTAB                   | 9                 |
              | LF                     | 10                |
              | CR                     | 13                |
              | DQUOTE                 | 22                |
              | SPACE                  | 32                |
              | PLUS SIGN              | 43                |
              | COMMA                  | 44                |
              | HYPHEN-MINUS           | 45                |
              | PERIOD                 | 46                |
              | SOLIDUS                | 47                |
              | COLON                  | 58                |
              | SEMICOLON              | 59                |
              | LATIN CAPITAL LETTER N | 78                |
              | LATIN CAPITAL LETTER T | 84                |
              | LATIN CAPITAL LETTER X | 88                |
              | LATIN CAPITAL LETTER Z | 90                |
              | BACKSLASH              | 92                |
              | LATIN SMALL LETTER N   | 110               |
              +------------------------+-------------------+

2.2.  Related Memos

   Implementers will need to be familiar with several other memos that,
   along with this memo, form a framework for Internet calendaring and
   scheduling standards.  This memo specifies a core specification of
   objects, value types, properties, and property parameters.

   o  iTIP [2446bis] specifies an interoperability protocol for
      scheduling between different implementations;

   o  iCalendar Message-Based Interoperability Protocol (iMIP) [2447bis]
      specifies an Internet email binding for [2446bis].

   This memo does not attempt to repeat the specification of concepts or
   definitions from these other memos.  Where possible, references are
   made to the memo that provides for the specification of these
   concepts or definitions.

3.  iCalendar Object Specification

   The following sections define the details of a Calendaring and
   Scheduling Core Object Specification.  The Calendaring and Scheduling
   Core Object is a collection of calendaring and scheduling
   information.  Typically, this information will consist of an
   iCalendar stream with one or more iCalendar objects.  The body of the



Desruisseaux                Standards Track                     [Page 8]

RFC 5545                       iCalendar                  September 2009


   iCalendar object consists of a sequence of calendar properties and
   one or more calendar components.

   Section 3.1 defines the content line format; Section 3.2 defines the
   property parameter format; Section 3.3 defines the data types for
   property values; Section 3.4 defines the iCalendar object format;
   Section 3.5 defines the iCalendar property format; Section 3.6
   defines the calendar component format; Section 3.7 defines calendar
   properties; and Section 3.8 defines calendar component properties.

   This information is intended to be an integral part of the MIME
   content type registration.  In addition, this information can be used
   independent of such content registration.  In particular, this memo
   has direct applicability for use as a calendaring and scheduling
   exchange format in file-, memory-, or network-based transport
   mechanisms.

3.1.  Content Lines

   The iCalendar object is organized into individual lines of text,
   called content lines.  Content lines are delimited by a line break,
   which is a CRLF sequence (CR character followed by LF character).

   Lines of text SHOULD NOT be longer than 75 octets, excluding the line
   break.  Long content lines SHOULD be split into a multiple line
   representations using a line "folding" technique.  That is, a long
   line can be split between any two characters by inserting a CRLF
   immediately followed by a single linear white-space character (i.e.,
   SPACE or HTAB).  Any sequence of CRLF followed immediately by a
   single linear white-space character is ignored (i.e., removed) when
   processing the content type.

   For example, the line:

     DESCRIPTION:This is a long description that exists on a long line.

   Can be represented as:

     DESCRIPTION:This is a lo
      ng description
       that exists on a long line.

   The process of moving from this folded multiple-line representation
   to its single-line representation is called "unfolding".  Unfolding
   is accomplished by removing the CRLF and the linear white-space
   character that immediately follows.





Desruisseaux                Standards Track                     [Page 9]

RFC 5545                       iCalendar                  September 2009


   When parsing a content line, folded lines MUST first be unfolded
   according to the unfolding procedure described above.

      Note: It is possible for very simple implementations to generate
      improperly folded lines in the middle of a UTF-8 multi-octet
      sequence.  For this reason, implementations need to unfold lines
      in such a way to properly restore the original sequence.

   The content information associated with an iCalendar object is
   formatted using a syntax similar to that defined by [RFC2425].  That
   is, the content information consists of CRLF-separated content lines.

   The following notation defines the lines of content in an iCalendar
   object:

     contentline   = name *(";" param ) ":" value CRLF
     ; This ABNF is just a general definition for an initial parsing
     ; of the content line into its property name, parameter list,
     ; and value string

     ; When parsing a content line, folded lines MUST first
     ; be unfolded according to the unfolding procedure
     ; described above.  When generating a content line, lines
     ; longer than 75 octets SHOULD be folded according to
     ; the folding procedure described above.

     name          = iana-token / x-name

     iana-token    = 1*(ALPHA / DIGIT / "-")
     ; iCalendar identifier registered with IANA

     x-name        = "X-" [vendorid "-"] 1*(ALPHA / DIGIT / "-")
     ; Reserved for experimental use.

     vendorid      = 3*(ALPHA / DIGIT)
     ; Vendor identification

     param         = param-name "=" param-value *("," param-value)
     ; Each property defines the specific ABNF for the parameters
     ; allowed on the property.  Refer to specific properties for
     ; precise parameter ABNF.

     param-name    = iana-token / x-name

     param-value   = paramtext / quoted-string

     paramtext     = *SAFE-CHAR




Desruisseaux                Standards Track                    [Page 10]

RFC 5545                       iCalendar                  September 2009


     value         = *VALUE-CHAR

     quoted-string = DQUOTE *QSAFE-CHAR DQUOTE

     QSAFE-CHAR    = WSP / %x21 / %x23-7E / NON-US-ASCII
     ; Any character except CONTROL and DQUOTE

     SAFE-CHAR     = WSP / %x21 / %x23-2B / %x2D-39 / %x3C-7E
                   / NON-US-ASCII
     ; Any character except CONTROL, DQUOTE, ";", ":", ","

     VALUE-CHAR    = WSP / %x21-7E / NON-US-ASCII
     ; Any textual character

     NON-US-ASCII  = UTF8-2 / UTF8-3 / UTF8-4
     ; UTF8-2, UTF8-3, and UTF8-4 are defined in [RFC3629]

     CONTROL       = %x00-08 / %x0A-1F / %x7F
     ; All the controls except HTAB

   The property value component of a content line has a format that is
   property specific.  Refer to the section describing each property for
   a definition of this format.

   All names of properties, property parameters, enumerated property
   values and property parameter values are case-insensitive.  However,
   all other property values are case-sensitive, unless otherwise
   stated.

3.1.1.  List and Field Separators

   Some properties and parameters allow a list of values.  Values in a
   list of values MUST be separated by a COMMA character.  There is no
   significance to the order of values in a list.  For those parameter
   values (such as those that specify URI values) that are specified in
   quoted-strings, the individual quoted-strings are separated by a
   COMMA character.

   Some property values are defined in terms of multiple parts.  These
   structured property values MUST have their value parts separated by a
   SEMICOLON character.

   Some properties allow a list of parameters.  Each property parameter
   in a list of property parameters MUST be separated by a SEMICOLON
   character.






Desruisseaux                Standards Track                    [Page 11]

RFC 5545                       iCalendar                  September 2009


   Property parameters with values containing a COLON character, a
   SEMICOLON character or a COMMA character MUST be placed in quoted
   text.

   For example, in the following properties, a SEMICOLON is used to
   separate property parameters from each other and a COMMA character is
   used to separate property values in a value list.

     ATTENDEE;RSVP=TRUE;ROLE=REQ-PARTICIPANT:mailto:
      jsmith@example.com

     RDATE;VALUE=DATE:19970304,19970504,19970704,19970904

3.1.2.  Multiple Values

   Some properties defined in the iCalendar object can have multiple
   values.  The general rule for encoding multi-valued items is to
   simply create a new content line for each value, including the
   property name.  However, it should be noted that some properties
   support encoding multiple values in a single property by separating
   the values with a COMMA character.  Individual property definitions
   should be consulted for determining whether a specific property
   allows multiple values and in which of these two forms.  Multi-valued
   properties MUST NOT be used to specify multiple language variants of
   the same value.  Calendar applications SHOULD display all values.

3.1.3.  Binary Content

   Binary content information in an iCalendar object SHOULD be
   referenced using a URI within a property value.  That is, the binary
   content information SHOULD be placed in an external MIME entity that
   can be referenced by a URI from within the iCalendar object.  In
   applications where this is not feasible, binary content information
   can be included within an iCalendar object, but only after first
   encoding it into text using the "BASE64" encoding method defined in
   [RFC4648].  Inline binary content SHOULD only be used in applications
   whose special circumstances demand that an iCalendar object be
   expressed as a single entity.  A property containing inline binary
   content information MUST specify the "ENCODING" property parameter.
   Binary content information placed external to the iCalendar object
   MUST be referenced by a uniform resource identifier (URI).

   The following example specifies an "ATTACH" property that references
   an attachment external to the iCalendar object with a URI reference:

     ATTACH:http://example.com/public/quarterly-report.doc





Desruisseaux                Standards Track                    [Page 12]

RFC 5545                       iCalendar                  September 2009


   The following example specifies an "ATTACH" property with inline
   binary encoded content information:

     ATTACH;FMTTYPE=text/plain;ENCODING=BASE64;VALUE=BINARY:VGhlIH
      F1aWNrIGJyb3duIGZveCBqdW1wcyBvdmVyIHRoZSBsYXp5IGRvZy4

3.1.4.  Character Set

   There is not a property parameter to declare the charset used in a
   property value.  The default charset for an iCalendar stream is UTF-8
   as defined in [RFC3629].

   The "charset" Content-Type parameter MUST be used in MIME transports
   to specify the charset being used.

3.2.  Property Parameters

   A property can have attributes with which it is associated.  These
   "property parameters" contain meta-information about the property or
   the property value.  Property parameters are provided to specify such
   information as the location of an alternate text representation for a
   property value, the language of a text property value, the value type
   of the property value, and other attributes.

   Property parameter values that contain the COLON, SEMICOLON, or COMMA
   character separators MUST be specified as quoted-string text values.
   Property parameter values MUST NOT contain the DQUOTE character.  The
   DQUOTE character is used as a delimiter for parameter values that
   contain restricted characters or URI text.  For example:

     DESCRIPTION;ALTREP="cid:part1.0001@example.org":The Fall'98 Wild
       Wizards Conference - - Las Vegas\, NV\, USA

   Property parameter values that are not in quoted-strings are case-
   insensitive.

   The general property parameters defined by this memo are defined by
   the following notation:













Desruisseaux                Standards Track                    [Page 13]

RFC 5545                       iCalendar                  September 2009


     icalparameter = altrepparam       ; Alternate text representation
                   / cnparam           ; Common name
                   / cutypeparam       ; Calendar user type
                   / delfromparam      ; Delegator
                   / deltoparam        ; Delegatee
                   / dirparam          ; Directory entry
                   / encodingparam     ; Inline encoding
                   / fmttypeparam      ; Format type
                   / fbtypeparam       ; Free/busy time type
                   / languageparam     ; Language for text
                   / memberparam       ; Group or list membership
                   / partstatparam     ; Participation status
                   / rangeparam        ; Recurrence identifier range
                   / trigrelparam      ; Alarm trigger relationship
                   / reltypeparam      ; Relationship type
                   / roleparam         ; Participation role
                   / rsvpparam         ; RSVP expectation
                   / sentbyparam       ; Sent by
                   / tzidparam         ; Reference to time zone object
                   / valuetypeparam    ; Property value data type
                   / other-param

     other-param   = (iana-param / x-param)

     iana-param  = iana-token "=" param-value *("," param-value)
     ; Some other IANA-registered iCalendar parameter.

     x-param     = x-name "=" param-value *("," param-value)
     ; A non-standard, experimental parameter.

   Applications MUST ignore x-param and iana-param values they don't
   recognize.

3.2.1.  Alternate Text Representation

   Parameter Name:  ALTREP

   Purpose:  To specify an alternate text representation for the
      property value.

   Format Definition:  This property parameter is defined by the
      following notation:

     altrepparam = "ALTREP" "=" DQUOTE uri DQUOTE

   Description:  This parameter specifies a URI that points to an
      alternate representation for a textual property value.  A property
      specifying this parameter MUST also include a value that reflects



Desruisseaux                Standards Track                    [Page 14]

RFC 5545                       iCalendar                  September 2009


      the default representation of the text value.  The URI parameter
      value MUST be specified in a quoted-string.

         Note: While there is no restriction imposed on the URI schemes
         allowed for this parameter, Content Identifier (CID) [RFC2392],
         HTTP [RFC2616], and HTTPS [RFC2818] are the URI schemes most
         commonly used by current implementations.

   Example:

       DESCRIPTION;ALTREP="CID:part3.msg.970415T083000@example.com":
        Project XYZ Review Meeting will include the following agenda
         items: (a) Market Overview\, (b) Finances\, (c) Project Man
        agement

      The "ALTREP" property parameter value might point to a "text/html"
      content portion.

       Content-Type:text/html
       Content-Id:<part3.msg.970415T083000@example.com>

       <html>
         <head>
          <title></title>
         </head>
         <body>
           <p>
             <b>Project XYZ Review Meeting</b> will include
             the following agenda items:
             <ol>
               <li>Market Overview</li>
               <li>Finances</li>
               <li>Project Management</li>
             </ol>
           </p>
         </body>
       </html>

3.2.2.  Common Name

   Parameter Name:  CN

   Purpose:  To specify the common name to be associated with the
      calendar user specified by the property.

   Format Definition:  This property parameter is defined by the
      following notation:




Desruisseaux                Standards Track                    [Page 15]

RFC 5545                       iCalendar                  September 2009


     cnparam    = "CN" "=" param-value

   Description:  This parameter can be specified on properties with a
      CAL-ADDRESS value type.  The parameter specifies the common name
      to be associated with the calendar user specified by the property.
      The parameter value is text.  The parameter value can be used for
      display text to be associated with the calendar address specified
      by the property.

   Example:

       ORGANIZER;CN="John Smith":mailto:jsmith@example.com

3.2.3.  Calendar User Type

   Parameter Name:  CUTYPE

   Purpose:  To identify the type of calendar user specified by the
      property.

   Format Definition:  This property parameter is defined by the
      following notation:

       cutypeparam        = "CUTYPE" "="
                          ("INDIVIDUAL"   ; An individual
                         / "GROUP"        ; A group of individuals
                         / "RESOURCE"     ; A physical resource
                         / "ROOM"         ; A room resource
                         / "UNKNOWN"      ; Otherwise not known
                         / x-name         ; Experimental type
                         / iana-token)    ; Other IANA-registered
                                          ; type
       ; Default is INDIVIDUAL

   Description:  This parameter can be specified on properties with a
      CAL-ADDRESS value type.  The parameter identifies the type of
      calendar user specified by the property.  If not specified on a
      property that allows this parameter, the default is INDIVIDUAL.
      Applications MUST treat x-name and iana-token values they don't
      recognize the same way as they would the UNKNOWN value.

   Example:

       ATTENDEE;CUTYPE=GROUP:mailto:ietf-calsch@example.org







Desruisseaux                Standards Track                    [Page 16]

RFC 5545                       iCalendar                  September 2009


3.2.4.  Delegators

   Parameter Name:  DELEGATED-FROM

   Purpose:  To specify the calendar users that have delegated their
      participation to the calendar user specified by the property.

   Format Definition:  This property parameter is defined by the
      following notation:

       delfromparam       = "DELEGATED-FROM" "=" DQUOTE cal-address
                             DQUOTE *("," DQUOTE cal-address DQUOTE)

   Description:  This parameter can be specified on properties with a
      CAL-ADDRESS value type.  This parameter specifies those calendar
      users that have delegated their participation in a group-scheduled
      event or to-do to the calendar user specified by the property.
      The individual calendar address parameter values MUST each be
      specified in a quoted-string.

   Example:

       ATTENDEE;DELEGATED-FROM="mailto:jsmith@example.com":mailto:
        jdoe@example.com

3.2.5.  Delegatees

   Parameter Name:  DELEGATED-TO

   Purpose:  To specify the calendar users to whom the calendar user
      specified by the property has delegated participation.

   Format Definition:  This property parameter is defined by the
      following notation:

       deltoparam = "DELEGATED-TO" "=" DQUOTE cal-address DQUOTE
                    *("," DQUOTE cal-address DQUOTE)

   Description:  This parameter can be specified on properties with a
      CAL-ADDRESS value type.  This parameter specifies those calendar
      users whom have been delegated participation in a group-scheduled
      event or to-do by the calendar user specified by the property.
      The individual calendar address parameter values MUST each be
      specified in a quoted-string.







Desruisseaux                Standards Track                    [Page 17]

RFC 5545                       iCalendar                  September 2009


   Example:

       ATTENDEE;DELEGATED-TO="mailto:jdoe@example.com","mailto:jqpublic
        @example.com":mailto:jsmith@example.com

3.2.6.  Directory Entry Reference

   Parameter Name:  DIR

   Purpose:  To specify reference to a directory entry associated with
      the calendar user specified by the property.

   Format Definition:  This property parameter is defined by the
      following notation:

       dirparam   = "DIR" "=" DQUOTE uri DQUOTE

   Description:  This parameter can be specified on properties with a
      CAL-ADDRESS value type.  The parameter specifies a reference to
      the directory entry associated with the calendar user specified by
      the property.  The parameter value is a URI.  The URI parameter
      value MUST be specified in a quoted-string.

         Note: While there is no restriction imposed on the URI schemes
         allowed for this parameter, CID [RFC2392], DATA [RFC2397], FILE
         [RFC1738], FTP [RFC1738], HTTP [RFC2616], HTTPS [RFC2818], LDAP
         [RFC4516], and MID [RFC2392] are the URI schemes most commonly
         used by current implementations.

   Example:

       ORGANIZER;DIR="ldap://example.com:6666/o=ABC%20Industries,
        c=US???(cn=Jim%20Dolittle)":mailto:jimdo@example.com

3.2.7.  Inline Encoding

   Parameter Name:  ENCODING

   Purpose:  To specify an alternate inline encoding for the property
      value.

   Format Definition:  This property parameter is defined by the
      following notation:








Desruisseaux                Standards Track                    [Page 18]

RFC 5545                       iCalendar                  September 2009


       encodingparam      = "ENCODING" "="
                          ( "8BIT"
          ; "8bit" text encoding is defined in [RFC2045]
                          / "BASE64"
          ; "BASE64" binary encoding format is defined in [RFC4648]
                          )

   Description:  This property parameter identifies the inline encoding
      used in a property value.  The default encoding is "8BIT",
      corresponding to a property value consisting of text.  The
      "BASE64" encoding type corresponds to a property value encoded
      using the "BASE64" encoding defined in [RFC2045].

      If the value type parameter is ";VALUE=BINARY", then the inline
      encoding parameter MUST be specified with the value
      ";ENCODING=BASE64".

   Example:

     ATTACH;FMTTYPE=text/plain;ENCODING=BASE64;VALUE=BINARY:TG9yZW
      0gaXBzdW0gZG9sb3Igc2l0IGFtZXQsIGNvbnNlY3RldHVyIGFkaXBpc2ljaW
      5nIGVsaXQsIHNlZCBkbyBlaXVzbW9kIHRlbXBvciBpbmNpZGlkdW50IHV0IG
      xhYm9yZSBldCBkb2xvcmUgbWFnbmEgYWxpcXVhLiBVdCBlbmltIGFkIG1pbm
      ltIHZlbmlhbSwgcXVpcyBub3N0cnVkIGV4ZXJjaXRhdGlvbiB1bGxhbWNvIG
      xhYm9yaXMgbmlzaSB1dCBhbGlxdWlwIGV4IGVhIGNvbW1vZG8gY29uc2VxdW
      F0LiBEdWlzIGF1dGUgaXJ1cmUgZG9sb3IgaW4gcmVwcmVoZW5kZXJpdCBpbi
      B2b2x1cHRhdGUgdmVsaXQgZXNzZSBjaWxsdW0gZG9sb3JlIGV1IGZ1Z2lhdC
      BudWxsYSBwYXJpYXR1ci4gRXhjZXB0ZXVyIHNpbnQgb2NjYWVjYXQgY3VwaW
      RhdGF0IG5vbiBwcm9pZGVudCwgc3VudCBpbiBjdWxwYSBxdWkgb2ZmaWNpYS
      BkZXNlcnVudCBtb2xsaXQgYW5pbSBpZCBlc3QgbGFib3J1bS4=

3.2.8.  Format Type

   Parameter Name:  FMTTYPE

   Purpose:  To specify the content type of a referenced object.

   Format Definition:  This property parameter is defined by the
      following notation:

       fmttypeparam = "FMTTYPE" "=" type-name "/" subtype-name
                      ; Where "type-name" and "subtype-name" are
                      ; defined in Section 4.2 of [RFC4288].

   Description:  This parameter can be specified on properties that are
      used to reference an object.  The parameter specifies the media
      type [RFC4288] of the referenced object.  For example, on the
      "ATTACH" property, an FTP type URI value does not, by itself,



Desruisseaux                Standards Track                    [Page 19]

RFC 5545                       iCalendar                  September 2009


      necessarily convey the type of content associated with the
      resource.  The parameter value MUST be the text for either an
      IANA-registered media type or a non-standard media type.

   Example:

       ATTACH;FMTTYPE=application/msword:ftp://example.com/pub/docs/
        agenda.doc

3.2.9.  Free/Busy Time Type

   Parameter Name:  FBTYPE

   Purpose:  To specify the free or busy time type.

   Format Definition:  This property parameter is defined by the
      following notation:

       fbtypeparam        = "FBTYPE" "=" ("FREE" / "BUSY"
                          / "BUSY-UNAVAILABLE" / "BUSY-TENTATIVE"
                          / x-name
                ; Some experimental iCalendar free/busy type.
                          / iana-token)
                ; Some other IANA-registered iCalendar free/busy type.

   Description:  This parameter specifies the free or busy time type.
      The value FREE indicates that the time interval is free for
      scheduling.  The value BUSY indicates that the time interval is
      busy because one or more events have been scheduled for that
      interval.  The value BUSY-UNAVAILABLE indicates that the time
      interval is busy and that the interval can not be scheduled.  The
      value BUSY-TENTATIVE indicates that the time interval is busy
      because one or more events have been tentatively scheduled for
      that interval.  If not specified on a property that allows this
      parameter, the default is BUSY.  Applications MUST treat x-name
      and iana-token values they don't recognize the same way as they
      would the BUSY value.

   Example:  The following is an example of this parameter on a
      "FREEBUSY" property.

       FREEBUSY;FBTYPE=BUSY:19980415T133000Z/19980415T170000Z









Desruisseaux                Standards Track                    [Page 20]

RFC 5545                       iCalendar                  September 2009


3.2.10.  Language

   Parameter Name:  LANGUAGE

   Purpose:  To specify the language for text values in a property or
      property parameter.

   Format Definition:  This property parameter is defined by the
      following notation:

       languageparam = "LANGUAGE" "=" language

       language = Language-Tag
                  ; As defined in [RFC5646].

   Description:  This parameter identifies the language of the text in
      the property value and of all property parameter values of the
      property.  The value of the "LANGUAGE" property parameter is that
      defined in [RFC5646].

      For transport in a MIME entity, the Content-Language header field
      can be used to set the default language for the entire body part.
      Otherwise, no default language is assumed.

   Example:  The following are examples of this parameter on the
      "SUMMARY" and "LOCATION" properties:

       SUMMARY;LANGUAGE=en-US:Company Holiday Party

       LOCATION;LANGUAGE=en:Germany

       LOCATION;LANGUAGE=no:Tyskland

3.2.11.  Group or List Membership

   Parameter Name:  MEMBER

   Purpose:  To specify the group or list membership of the calendar
      user specified by the property.

   Format Definition:  This property parameter is defined by the
      following notation:

       memberparam        = "MEMBER" "=" DQUOTE cal-address DQUOTE
                            *("," DQUOTE cal-address DQUOTE)






Desruisseaux                Standards Track                    [Page 21]

RFC 5545                       iCalendar                  September 2009


   Description:  This parameter can be specified on properties with a
      CAL-ADDRESS value type.  The parameter identifies the groups or
      list membership for the calendar user specified by the property.
      The parameter value is either a single calendar address in a
      quoted-string or a COMMA-separated list of calendar addresses,
      each in a quoted-string.  The individual calendar address
      parameter values MUST each be specified in a quoted-string.

   Example:

       ATTENDEE;MEMBER="mailto:ietf-calsch@example.org":mailto:
        jsmith@example.com

       ATTENDEE;MEMBER="mailto:projectA@example.com","mailto:pr
        ojectB@example.com":mailto:janedoe@example.com

3.2.12.  Participation Status

   Parameter Name:  PARTSTAT

   Purpose:  To specify the participation status for the calendar user
      specified by the property.

   Format Definition:  This property parameter is defined by the
      following notation:

       partstatparam    = "PARTSTAT" "="
                         (partstat-event
                        / partstat-todo
                        / partstat-jour)

       partstat-event   = ("NEEDS-ACTION"    ; Event needs action
                        / "ACCEPTED"         ; Event accepted
                        / "DECLINED"         ; Event declined
                        / "TENTATIVE"        ; Event tentatively
                                             ; accepted
                        / "DELEGATED"        ; Event delegated
                        / x-name             ; Experimental status
                        / iana-token)        ; Other IANA-registered
                                             ; status
       ; These are the participation statuses for a "VEVENT".
       ; Default is NEEDS-ACTION.

       partstat-todo    = ("NEEDS-ACTION"    ; To-do needs action
                        / "ACCEPTED"         ; To-do accepted
                        / "DECLINED"         ; To-do declined
                        / "TENTATIVE"        ; To-do tentatively
                                             ; accepted



Desruisseaux                Standards Track                    [Page 22]

RFC 5545                       iCalendar                  September 2009


                        / "DELEGATED"        ; To-do delegated
                        / "COMPLETED"        ; To-do completed
                                             ; COMPLETED property has
                                             ; DATE-TIME completed
                        / "IN-PROCESS"       ; To-do in process of
                                             ; being completed
                        / x-name             ; Experimental status
                        / iana-token)        ; Other IANA-registered
                                             ; status
       ; These are the participation statuses for a "VTODO".
       ; Default is NEEDS-ACTION.



       partstat-jour    = ("NEEDS-ACTION"    ; Journal needs action
                        / "ACCEPTED"         ; Journal accepted
                        / "DECLINED"         ; Journal declined
                        / x-name             ; Experimental status
                        / iana-token)        ; Other IANA-registered
                                             ; status
       ; These are the participation statuses for a "VJOURNAL".
       ; Default is NEEDS-ACTION.

   Description:  This parameter can be specified on properties with a
      CAL-ADDRESS value type.  The parameter identifies the
      participation status for the calendar user specified by the
      property value.  The parameter values differ depending on whether
      they are associated with a group-scheduled "VEVENT", "VTODO", or
      "VJOURNAL".  The values MUST match one of the values allowed for
      the given calendar component.  If not specified on a property that
      allows this parameter, the default value is NEEDS-ACTION.
      Applications MUST treat x-name and iana-token values they don't
      recognize the same way as they would the NEEDS-ACTION value.

   Example:

       ATTENDEE;PARTSTAT=DECLINED:mailto:jsmith@example.com

3.2.13.  Recurrence Identifier Range

   Parameter Name:  RANGE

   Purpose:  To specify the effective range of recurrence instances from
      the instance specified by the recurrence identifier specified by
      the property.

   Format Definition:  This property parameter is defined by the
      following notation:



Desruisseaux                Standards Track                    [Page 23]

RFC 5545                       iCalendar                  September 2009


       rangeparam = "RANGE" "=" "THISANDFUTURE"
       ; To specify the instance specified by the recurrence identifier
       ; and all subsequent recurrence instances.

   Description:  This parameter can be specified on a property that
      specifies a recurrence identifier.  The parameter specifies the
      effective range of recurrence instances that is specified by the
      property.  The effective range is from the recurrence identifier
      specified by the property.  If this parameter is not specified on
      an allowed property, then the default range is the single instance
      specified by the recurrence identifier value of the property.  The
      parameter value can only be "THISANDFUTURE" to indicate a range
      defined by the recurrence identifier and all subsequent instances.
      The value "THISANDPRIOR" is deprecated by this revision of
      iCalendar and MUST NOT be generated by applications.

   Example:

       RECURRENCE-ID;RANGE=THISANDFUTURE:19980401T133000Z

3.2.14.  Alarm Trigger Relationship

   Parameter Name:  RELATED

   Purpose:  To specify the relationship of the alarm trigger with
      respect to the start or end of the calendar component.

   Format Definition:  This property parameter is defined by the
      following notation:

       trigrelparam       = "RELATED" "="
                           ("START"       ; Trigger off of start
                          / "END")        ; Trigger off of end

   Description:  This parameter can be specified on properties that
      specify an alarm trigger with a "DURATION" value type.  The
      parameter specifies whether the alarm will trigger relative to the
      start or end of the calendar component.  The parameter value START
      will set the alarm to trigger off the start of the calendar
      component; the parameter value END will set the alarm to trigger
      off the end of the calendar component.  If the parameter is not
      specified on an allowable property, then the default is START.

   Example:

       TRIGGER;RELATED=END:PT5M





Desruisseaux                Standards Track                    [Page 24]

RFC 5545                       iCalendar                  September 2009


3.2.15.  Relationship Type

   Parameter Name:  RELTYPE

   Purpose:  To specify the type of hierarchical relationship associated
      with the calendar component specified by the property.

   Format Definition:  This property parameter is defined by the
      following notation:

       reltypeparam       = "RELTYPE" "="
                           ("PARENT"    ; Parent relationship - Default
                          / "CHILD"     ; Child relationship
                          / "SIBLING"   ; Sibling relationship
                          / iana-token  ; Some other IANA-registered
                                        ; iCalendar relationship type
                          / x-name)     ; A non-standard, experimental
                                        ; relationship type

   Description:  This parameter can be specified on a property that
      references another related calendar.  The parameter specifies the
      hierarchical relationship type of the calendar component
      referenced by the property.  The parameter value can be PARENT, to
      indicate that the referenced calendar component is a superior of
      calendar component; CHILD to indicate that the referenced calendar
      component is a subordinate of the calendar component; or SIBLING
      to indicate that the referenced calendar component is a peer of
      the calendar component.  If this parameter is not specified on an
      allowable property, the default relationship type is PARENT.
      Applications MUST treat x-name and iana-token values they don't
      recognize the same way as they would the PARENT value.

   Example:

       RELATED-TO;RELTYPE=SIBLING:19960401-080045-4000F192713@
        example.com

3.2.16.  Participation Role

   Parameter Name:  ROLE

   Purpose:  To specify the participation role for the calendar user
      specified by the property.

   Format Definition:  This property parameter is defined by the
      following notation:





Desruisseaux                Standards Track                    [Page 25]

RFC 5545                       iCalendar                  September 2009


       roleparam  = "ROLE" "="
                   ("CHAIR"             ; Indicates chair of the
                                        ; calendar entity
                  / "REQ-PARTICIPANT"   ; Indicates a participant whose
                                        ; participation is required
                  / "OPT-PARTICIPANT"   ; Indicates a participant whose
                                        ; participation is optional
                  / "NON-PARTICIPANT"   ; Indicates a participant who
                                        ; is copied for information
                                        ; purposes only
                  / x-name              ; Experimental role
                  / iana-token)         ; Other IANA role
       ; Default is REQ-PARTICIPANT

   Description:  This parameter can be specified on properties with a
      CAL-ADDRESS value type.  The parameter specifies the participation
      role for the calendar user specified by the property in the group
      schedule calendar component.  If not specified on a property that
      allows this parameter, the default value is REQ-PARTICIPANT.
      Applications MUST treat x-name and iana-token values they don't
      recognize the same way as they would the REQ-PARTICIPANT value.

   Example:

       ATTENDEE;ROLE=CHAIR:mailto:mrbig@example.com

3.2.17.  RSVP Expectation

   Parameter Name:  RSVP

   Purpose:  To specify whether there is an expectation of a favor of a
      reply from the calendar user specified by the property value.

   Format Definition:  This property parameter is defined by the
      following notation:

       rsvpparam = "RSVP" "=" ("TRUE" / "FALSE")
       ; Default is FALSE

   Description:  This parameter can be specified on properties with a
      CAL-ADDRESS value type.  The parameter identifies the expectation
      of a reply from the calendar user specified by the property value.
      This parameter is used by the "Organizer" to request a
      participation status reply from an "Attendee" of a group-scheduled
      event or to-do.  If not specified on a property that allows this
      parameter, the default value is FALSE.





Desruisseaux                Standards Track                    [Page 26]

RFC 5545                       iCalendar                  September 2009


   Example:

       ATTENDEE;RSVP=TRUE:mailto:jsmith@example.com

3.2.18.  Sent By

   Parameter Name:  SENT-BY

   Purpose:  To specify the calendar user that is acting on behalf of
      the calendar user specified by the property.

   Format Definition:  This property parameter is defined by the
      following notation:

       sentbyparam        = "SENT-BY" "=" DQUOTE cal-address DQUOTE

   Description:  This parameter can be specified on properties with a
      CAL-ADDRESS value type.  The parameter specifies the calendar user
      that is acting on behalf of the calendar user specified by the
      property.  The parameter value MUST be a mailto URI as defined in
      [RFC2368].  The individual calendar address parameter values MUST
      each be specified in a quoted-string.

   Example:

       ORGANIZER;SENT-BY="mailto:sray@example.com":mailto:
        jsmith@example.com

3.2.19.  Time Zone Identifier

   Parameter Name:  TZID

   Purpose:  To specify the identifier for the time zone definition for
      a time component in the property value.

   Format Definition:  This property parameter is defined by the
      following notation:

       tzidparam  = "TZID" "=" [tzidprefix] paramtext

       tzidprefix = "/"

   Description:  This parameter MUST be specified on the "DTSTART",
      "DTEND", "DUE", "EXDATE", and "RDATE" properties when either a
      DATE-TIME or TIME value type is specified and when the value is
      neither a UTC or a "floating" time.  Refer to the DATE-TIME or
      TIME value type definition for a description of UTC and "floating
      time" formats.  This property parameter specifies a text value



Desruisseaux                Standards Track                    [Page 27]

RFC 5545                       iCalendar                  September 2009


      that uniquely identifies the "VTIMEZONE" calendar component to be
      used when evaluating the time portion of the property.  The value
      of the "TZID" property parameter will be equal to the value of the
      "TZID" property for the matching time zone definition.  An
      individual "VTIMEZONE" calendar component MUST be specified for
      each unique "TZID" parameter value specified in the iCalendar
      object.

      The parameter MUST be specified on properties with a DATE-TIME
      value if the DATE-TIME is not either a UTC or a "floating" time.
      Failure to include and follow VTIMEZONE definitions in iCalendar
      objects may lead to inconsistent understanding of the local time
      at any given location.

      The presence of the SOLIDUS character as a prefix, indicates that
      this "TZID" represents a unique ID in a globally defined time zone
      registry (when such registry is defined).

         Note: This document does not define a naming convention for
         time zone identifiers.  Implementers may want to use the naming
         conventions defined in existing time zone specifications such
         as the public-domain TZ database [TZDB].  The specification of
         globally unique time zone identifiers is not addressed by this
         document and is left for future study.

      The following are examples of this property parameter:

       DTSTART;TZID=America/New_York:19980119T020000

       DTEND;TZID=America/New_York:19980119T030000

      The "TZID" property parameter MUST NOT be applied to DATE
      properties and DATE-TIME or TIME properties whose time values are
      specified in UTC.

      The use of local time in a DATE-TIME or TIME value without the
      "TZID" property parameter is to be interpreted as floating time,
      regardless of the existence of "VTIMEZONE" calendar components in
      the iCalendar object.

      For more information, see the sections on the value types DATE-
      TIME and TIME.









Desruisseaux                Standards Track                    [Page 28]

RFC 5545                       iCalendar                  September 2009


3.2.20.  Value Data Types

   Parameter Name:  VALUE

   Purpose:  To explicitly specify the value type format for a property
      value.

   Format Definition:  This property parameter is defined by the
      following notation:

       valuetypeparam = "VALUE" "=" valuetype

       valuetype  = ("BINARY"
                  / "BOOLEAN"
                  / "CAL-ADDRESS"
                  / "DATE"
                  / "DATE-TIME"
                  / "DURATION"
                  / "FLOAT"
                  / "INTEGER"
                  / "PERIOD"
                  / "RECUR"
                  / "TEXT"
                  / "TIME"
                  / "URI"
                  / "UTC-OFFSET"
                  / x-name
                  ; Some experimental iCalendar value type.
                  / iana-token)
                  ; Some other IANA-registered iCalendar value type.

   Description:  This parameter specifies the value type and format of
      the property value.  The property values MUST be of a single value
      type.  For example, a "RDATE" property cannot have a combination
      of DATE-TIME and TIME value types.

      If the property's value is the default value type, then this
      parameter need not be specified.  However, if the property's
      default value type is overridden by some other allowable value
      type, then this parameter MUST be specified.

      Applications MUST preserve the value data for x-name and iana-
      token values that they don't recognize without attempting to
      interpret or parse the value data.







Desruisseaux                Standards Track                    [Page 29]

RFC 5545                       iCalendar                  September 2009


3.3.  Property Value Data Types

   The properties in an iCalendar object are strongly typed.  The
   definition of each property restricts the value to be one of the
   value data types, or simply value types, defined in this section.
   The value type for a property will either be specified implicitly as
   the default value type or will be explicitly specified with the
   "VALUE" parameter.  If the value type of a property is one of the
   alternate valid types, then it MUST be explicitly specified with the
   "VALUE" parameter.

3.3.1.  Binary

   Value Name:  BINARY

   Purpose:  This value type is used to identify properties that contain
      a character encoding of inline binary data.  For example, an
      inline attachment of a document might be included in an iCalendar
      object.

   Format Definition:  This value type is defined by the following
      notation:

       binary     = *(4b-char) [b-end]
       ; A "BASE64" encoded character string, as defined by [RFC4648].

       b-end      = (2b-char "==") / (3b-char "=")

       b-char = ALPHA / DIGIT / "+" / "/"

   Description:  Property values with this value type MUST also include
      the inline encoding parameter sequence of ";ENCODING=BASE64".
      That is, all inline binary data MUST first be character encoded
      using the "BASE64" encoding method defined in [RFC2045].  No
      additional content value encoding (i.e., BACKSLASH character
      encoding, see Section 3.3.11) is defined for this value type.















Desruisseaux                Standards Track                    [Page 30]

RFC 5545                       iCalendar                  September 2009


   Example:  The following is an example of a "BASE64" encoded binary
      value data:

     ATTACH;FMTTYPE=image/vnd.microsoft.icon;ENCODING=BASE64;VALUE
      =BINARY:AAABAAEAEBAQAAEABAAoAQAAFgAAACgAAAAQAAAAIAAAAAEABAAA
      AAAAAAAAAAAAAAAAAAAAAAAAAAAAAACAAAAAgIAAAICAgADAwMAA////AAAA
      AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
      AAAAAAAAAAAAAAAAAAAAAAMwAAAAAAABNEMQAAAAAAAkQgAAAAAAJEREQgAA
      ACECQ0QgEgAAQxQzM0E0AABERCRCREQAADRDJEJEQwAAAhA0QwEQAAAAAERE
      AAAAAAAAREQAAAAAAAAkQgAAAAAAAAMgAAAAAAAAAAAAAAAAAAAAAAAAAAAA
      AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
      AAAAAAAAAAAA

3.3.2.  Boolean

   Value Name:  BOOLEAN

   Purpose:  This value type is used to identify properties that contain
      either a "TRUE" or "FALSE" Boolean value.

   Format Definition:  This value type is defined by the following
      notation:

       boolean    = "TRUE" / "FALSE"

   Description:  These values are case-insensitive text.  No additional
      content value encoding (i.e., BACKSLASH character encoding, see
      Section 3.3.11) is defined for this value type.

   Example:  The following is an example of a hypothetical property that
      has a BOOLEAN value type:

       TRUE

3.3.3.  Calendar User Address

   Value Name:  CAL-ADDRESS

   Purpose:  This value type is used to identify properties that contain
      a calendar user address.

   Format Definition:  This value type is defined by the following
      notation:

       cal-address        = uri

   Description:  The value is a URI as defined by [RFC3986] or any other
      IANA-registered form for a URI.  When used to address an Internet



Desruisseaux                Standards Track                    [Page 31]

RFC 5545                       iCalendar                  September 2009


      email transport address for a calendar user, the value MUST be a
      mailto URI, as defined by [RFC2368].  No additional content value
      encoding (i.e., BACKSLASH character encoding, see Section 3.3.11)
      is defined for this value type.

   Example:

    mailto:jane_doe@example.com

3.3.4.  Date

   Value Name:  DATE

   Purpose:  This value type is used to identify values that contain a
      calendar date.

   Format Definition:  This value type is defined by the following
      notation:

       date               = date-value

       date-value         = date-fullyear date-month date-mday
       date-fullyear      = 4DIGIT
       date-month         = 2DIGIT        ;01-12
       date-mday          = 2DIGIT        ;01-28, 01-29, 01-30, 01-31
                                          ;based on month/year

   Description:  If the property permits, multiple "date" values are
      specified as a COMMA-separated list of values.  The format for the
      value type is based on the [ISO.8601.2004] complete
      representation, basic format for a calendar date.  The textual
      format specifies a four-digit year, two-digit month, and two-digit
      day of the month.  There are no separator characters between the
      year, month, and day component text.

      No additional content value encoding (i.e., BACKSLASH character
      encoding, see Section 3.3.11) is defined for this value type.

   Example:  The following represents July 14, 1997:

       19970714

3.3.5.  Date-Time

   Value Name:  DATE-TIME

   Purpose:  This value type is used to identify values that specify a
      precise calendar date and time of day.



Desruisseaux                Standards Track                    [Page 32]

RFC 5545                       iCalendar                  September 2009


   Format Definition:  This value type is defined by the following
      notation:

       date-time  = date "T" time ;As specified in the DATE and TIME
                                  ;value definitions

   Description:  If the property permits, multiple "DATE-TIME" values
      are specified as a COMMA-separated list of values.  No additional
      content value encoding (i.e., BACKSLASH character encoding, see
      Section 3.3.11) is defined for this value type.

      The "DATE-TIME" value type is used to identify values that contain
      a precise calendar date and time of day.  The format is based on
      the [ISO.8601.2004] complete representation, basic format for a
      calendar date and time of day.  The text format is a concatenation
      of the "date", followed by the LATIN CAPITAL LETTER T character,
      the time designator, followed by the "time" format.

      The "DATE-TIME" value type expresses time values in three forms:

      The form of date and time with UTC offset MUST NOT be used.  For
      example, the following is not valid for a DATE-TIME value:

       19980119T230000-0800       ;Invalid time format

      FORM #1: DATE WITH LOCAL TIME

      The date with local time form is simply a DATE-TIME value that
      does not contain the UTC designator nor does it reference a time
      zone.  For example, the following represents January 18, 1998, at
      11 PM:

       19980118T230000

      DATE-TIME values of this type are said to be "floating" and are
      not bound to any time zone in particular.  They are used to
      represent the same hour, minute, and second value regardless of
      which time zone is currently being observed.  For example, an
      event can be defined that indicates that an individual will be
      busy from 11:00 AM to 1:00 PM every day, no matter which time zone
      the person is in.  In these cases, a local time can be specified.
      The recipient of an iCalendar object with a property value
      consisting of a local time, without any relative time zone
      information, SHOULD interpret the value as being fixed to whatever
      time zone the "ATTENDEE" is in at any given moment.  This means
      that two "Attendees", in different time zones, receiving the same
      event definition as a floating time, may be participating in the




Desruisseaux                Standards Track                    [Page 33]

RFC 5545                       iCalendar                  September 2009


      event at different actual times.  Floating time SHOULD only be
      used where that is the reasonable behavior.

      In most cases, a fixed time is desired.  To properly communicate a
      fixed time in a property value, either UTC time or local time with
      time zone reference MUST be specified.

      The use of local time in a DATE-TIME value without the "TZID"
      property parameter is to be interpreted as floating time,
      regardless of the existence of "VTIMEZONE" calendar components in
      the iCalendar object.

      FORM #2: DATE WITH UTC TIME

      The date with UTC time, or absolute time, is identified by a LATIN
      CAPITAL LETTER Z suffix character, the UTC designator, appended to
      the time value.  For example, the following represents January 19,
      1998, at 0700 UTC:

       19980119T070000Z

      The "TZID" property parameter MUST NOT be applied to DATE-TIME
      properties whose time values are specified in UTC.

      FORM #3: DATE WITH LOCAL TIME AND TIME ZONE REFERENCE

      The date and local time with reference to time zone information is
      identified by the use the "TZID" property parameter to reference
      the appropriate time zone definition.  "TZID" is discussed in
      detail in Section 3.2.19.  For example, the following represents
      2:00 A.M. in New York on January 19, 1998:

       TZID=America/New_York:19980119T020000

      If, based on the definition of the referenced time zone, the local
      time described occurs more than once (when changing from daylight
      to standard time), the DATE-TIME value refers to the first
      occurrence of the referenced time.  Thus, TZID=America/
      New_York:20071104T013000 indicates November 4, 2007 at 1:30 A.M.
      EDT (UTC-04:00).  If the local time described does not occur (when
      changing from standard to daylight time), the DATE-TIME value is
      interpreted using the UTC offset before the gap in local times.
      Thus, TZID=America/New_York:20070311T023000 indicates March 11,
      2007 at 3:30 A.M. EDT (UTC-04:00), one hour after 1:30 A.M. EST
      (UTC-05:00).






Desruisseaux                Standards Track                    [Page 34]

RFC 5545                       iCalendar                  September 2009


      A time value MUST only specify the second 60 when specifying a
      positive leap second.  For example:

       19970630T235960Z

      Implementations that do not support leap seconds SHOULD interpret
      the second 60 as equivalent to the second 59.

   Example:  The following represents July 14, 1997, at 1:30 PM in New
      York City in each of the three time formats, using the "DTSTART"
      property.

       DTSTART:19970714T133000                   ; Local time
       DTSTART:19970714T173000Z                  ; UTC time
       DTSTART;TZID=America/New_York:19970714T133000
                                                 ; Local time and time
                                                 ; zone reference

3.3.6.  Duration

   Value Name:  DURATION

   Purpose:  This value type is used to identify properties that contain
      a duration of time.

   Format Definition:  This value type is defined by the following
      notation:

       dur-value  = (["+"] / "-") "P" (dur-date / dur-time / dur-week)

       dur-date   = dur-day [dur-time]
       dur-time   = "T" (dur-hour / dur-minute / dur-second)
       dur-week   = 1*DIGIT "W"
       dur-hour   = 1*DIGIT "H" [dur-minute]
       dur-minute = 1*DIGIT "M" [dur-second]
       dur-second = 1*DIGIT "S"
       dur-day    = 1*DIGIT "D"

   Description:  If the property permits, multiple "duration" values are
      specified by a COMMA-separated list of values.  The format is
      based on the [ISO.8601.2004] complete representation basic format
      with designators for the duration of time.  The format can
      represent nominal durations (weeks and days) and accurate
      durations (hours, minutes, and seconds).  Note that unlike
      [ISO.8601.2004], this value type doesn't support the "Y" and "M"
      designators to specify durations in terms of years and months.





Desruisseaux                Standards Track                    [Page 35]

RFC 5545                       iCalendar                  September 2009


      The duration of a week or a day depends on its position in the
      calendar.  In the case of discontinuities in the time scale, such
      as the change from standard time to daylight time and back, the
      computation of the exact duration requires the subtraction or
      addition of the change of duration of the discontinuity.  Leap
      seconds MUST NOT be considered when computing an exact duration.
      When computing an exact duration, the greatest order time
      components MUST be added first, that is, the number of days MUST
      be added first, followed by the number of hours, number of
      minutes, and number of seconds.

      Negative durations are typically used to schedule an alarm to
      trigger before an associated time (see Section 3.8.6.3).

      No additional content value encoding (i.e., BACKSLASH character
      encoding, see Section 3.3.11) are defined for this value type.

   Example:  A duration of 15 days, 5 hours, and 20 seconds would be:

       P15DT5H0M20S

      A duration of 7 weeks would be:

       P7W

3.3.7.  Float

   Value Name:  FLOAT

   Purpose:  This value type is used to identify properties that contain
      a real-number value.

   Format Definition:  This value type is defined by the following
      notation:

       float      = (["+"] / "-") 1*DIGIT ["." 1*DIGIT]

   Description:  If the property permits, multiple "float" values are
      specified by a COMMA-separated list of values.

      No additional content value encoding (i.e., BACKSLASH character
      encoding, see Section 3.3.11) is defined for this value type.

   Example:

       1000000.0000001
       1.333
       -3.14



Desruisseaux                Standards Track                    [Page 36]

RFC 5545                       iCalendar                  September 2009


3.3.8.  Integer

   Value Name:  INTEGER

   Purpose:  This value type is used to identify properties that contain
      a signed integer value.

   Format Definition:  This value type is defined by the following
      notation:

       integer    = (["+"] / "-") 1*DIGIT

   Description:  If the property permits, multiple "integer" values are
      specified by a COMMA-separated list of values.  The valid range
      for "integer" is -2147483648 to 2147483647.  If the sign is not
      specified, then the value is assumed to be positive.

      No additional content value encoding (i.e., BACKSLASH character
      encoding, see Section 3.3.11) is defined for this value type.

   Example:

       1234567890
       -1234567890
       +1234567890
       432109876

3.3.9.  Period of Time

   Value Name:  PERIOD

   Purpose:  This value type is used to identify values that contain a
      precise period of time.

   Format Definition:  This value type is defined by the following
      notation:

       period     = period-explicit / period-start

       period-explicit = date-time "/" date-time
       ; [ISO.8601.2004] complete representation basic format for a
       ; period of time consisting of a start and end.  The start MUST
       ; be before the end.

       period-start = date-time "/" dur-value
       ; [ISO.8601.2004] complete representation basic format for a
       ; period of time consisting of a start and positive duration
       ; of time.



Desruisseaux                Standards Track                    [Page 37]

RFC 5545                       iCalendar                  September 2009


   Description:  If the property permits, multiple "period" values are
      specified by a COMMA-separated list of values.  There are two
      forms of a period of time.  First, a period of time is identified
      by its start and its end.  This format is based on the
      [ISO.8601.2004] complete representation, basic format for "DATE-
      TIME" start of the period, followed by a SOLIDUS character
      followed by the "DATE-TIME" of the end of the period.  The start
      of the period MUST be before the end of the period.  Second, a
      period of time can also be defined by a start and a positive
      duration of time.  The format is based on the [ISO.8601.2004]
      complete representation, basic format for the "DATE-TIME" start of
      the period, followed by a SOLIDUS character, followed by the
      [ISO.8601.2004] basic format for "DURATION" of the period.

   Example:  The period starting at 18:00:00 UTC, on January 1, 1997 and
      ending at 07:00:00 UTC on January 2, 1997 would be:

       19970101T180000Z/19970102T070000Z

      The period start at 18:00:00 on January 1, 1997 and lasting 5
      hours and 30 minutes would be:

       19970101T180000Z/PT5H30M

      No additional content value encoding (i.e., BACKSLASH character
      encoding, see Section 3.3.11) is defined for this value type.

3.3.10.  Recurrence Rule

   Value Name:  RECUR

   Purpose:  This value type is used to identify properties that contain
      a recurrence rule specification.

   Format Definition:  This value type is defined by the following
      notation:

       recur           = recur-rule-part *( ";" recur-rule-part )
                       ;
                       ; The rule parts are not ordered in any
                       ; particular sequence.
                       ;
                       ; The FREQ rule part is REQUIRED,
                       ; but MUST NOT occur more than once.
                       ;
                       ; The UNTIL or COUNT rule parts are OPTIONAL,
                       ; but they MUST NOT occur in the same 'recur'.
                       ;



Desruisseaux                Standards Track                    [Page 38]

RFC 5545                       iCalendar                  September 2009


                       ; The other rule parts are OPTIONAL,
                       ; but MUST NOT occur more than once.

       recur-rule-part = ( "FREQ" "=" freq )
                       / ( "UNTIL" "=" enddate )
                       / ( "COUNT" "=" 1*DIGIT )
                       / ( "INTERVAL" "=" 1*DIGIT )
                       / ( "BYSECOND" "=" byseclist )
                       / ( "BYMINUTE" "=" byminlist )
                       / ( "BYHOUR" "=" byhrlist )
                       / ( "BYDAY" "=" bywdaylist )
                       / ( "BYMONTHDAY" "=" bymodaylist )
                       / ( "BYYEARDAY" "=" byyrdaylist )
                       / ( "BYWEEKNO" "=" bywknolist )
                       / ( "BYMONTH" "=" bymolist )
                       / ( "BYSETPOS" "=" bysplist )
                       / ( "WKST" "=" weekday )

       freq        = "SECONDLY" / "MINUTELY" / "HOURLY" / "DAILY"
                   / "WEEKLY" / "MONTHLY" / "YEARLY"

       enddate     = date / date-time

       byseclist   = ( seconds *("," seconds) )

       seconds     = 1*2DIGIT       ;0 to 60

       byminlist   = ( minutes *("," minutes) )

       minutes     = 1*2DIGIT       ;0 to 59

       byhrlist    = ( hour *("," hour) )

       hour        = 1*2DIGIT       ;0 to 23

       bywdaylist  = ( weekdaynum *("," weekdaynum) )

       weekdaynum  = [[plus / minus] ordwk] weekday

       plus        = "+"

       minus       = "-"

       ordwk       = 1*2DIGIT       ;1 to 53

       weekday     = "SU" / "MO" / "TU" / "WE" / "TH" / "FR" / "SA"
       ;Corresponding to SUNDAY, MONDAY, TUESDAY, WEDNESDAY, THURSDAY,
       ;FRIDAY, and SATURDAY days of the week.



Desruisseaux                Standards Track                    [Page 39]

RFC 5545                       iCalendar                  September 2009


       bymodaylist = ( monthdaynum *("," monthdaynum) )

       monthdaynum = [plus / minus] ordmoday

       ordmoday    = 1*2DIGIT       ;1 to 31

       byyrdaylist = ( yeardaynum *("," yeardaynum) )

       yeardaynum  = [plus / minus] ordyrday

       ordyrday    = 1*3DIGIT      ;1 to 366

       bywknolist  = ( weeknum *("," weeknum) )

       weeknum     = [plus / minus] ordwk

       bymolist    = ( monthnum *("," monthnum) )

       monthnum    = 1*2DIGIT       ;1 to 12

       bysplist    = ( setposday *("," setposday) )

       setposday   = yeardaynum

   Description:  This value type is a structured value consisting of a
      list of one or more recurrence grammar parts.  Each rule part is
      defined by a NAME=VALUE pair.  The rule parts are separated from
      each other by the SEMICOLON character.  The rule parts are not
      ordered in any particular sequence.  Individual rule parts MUST
      only be specified once.  Compliant applications MUST accept rule
      parts ordered in any sequence, but to ensure backward
      compatibility with applications that pre-date this revision of
      iCalendar the FREQ rule part MUST be the first rule part specified
      in a RECUR value.

      The FREQ rule part identifies the type of recurrence rule.  This
      rule part MUST be specified in the recurrence rule.  Valid values
      include SECONDLY, to specify repeating events based on an interval
      of a second or more; MINUTELY, to specify repeating events based
      on an interval of a minute or more; HOURLY, to specify repeating
      events based on an interval of an hour or more; DAILY, to specify
      repeating events based on an interval of a day or more; WEEKLY, to
      specify repeating events based on an interval of a week or more;
      MONTHLY, to specify repeating events based on an interval of a
      month or more; and YEARLY, to specify repeating events based on an
      interval of a year or more.





Desruisseaux                Standards Track                    [Page 40]

RFC 5545                       iCalendar                  September 2009


      The INTERVAL rule part contains a positive integer representing at
      which intervals the recurrence rule repeats.  The default value is
      "1", meaning every second for a SECONDLY rule, every minute for a
      MINUTELY rule, every hour for an HOURLY rule, every day for a
      DAILY rule, every week for a WEEKLY rule, every month for a
      MONTHLY rule, and every year for a YEARLY rule.  For example,
      within a DAILY rule, a value of "8" means every eight days.

      The UNTIL rule part defines a DATE or DATE-TIME value that bounds
      the recurrence rule in an inclusive manner.  If the value
      specified by UNTIL is synchronized with the specified recurrence,
      this DATE or DATE-TIME becomes the last instance of the
      recurrence.  The value of the UNTIL rule part MUST have the same
      value type as the "DTSTART" property.  Furthermore, if the
      "DTSTART" property is specified as a date with local time, then
      the UNTIL rule part MUST also be specified as a date with local
      time.  If the "DTSTART" property is specified as a date with UTC
      time or a date with local time and time zone reference, then the
      UNTIL rule part MUST be specified as a date with UTC time.  In the
      case of the "STANDARD" and "DAYLIGHT" sub-components the UNTIL
      rule part MUST always be specified as a date with UTC time.  If
      specified as a DATE-TIME value, then it MUST be specified in a UTC
      time format.  If not present, and the COUNT rule part is also not
      present, the "RRULE" is considered to repeat forever.

      The COUNT rule part defines the number of occurrences at which to
      range-bound the recurrence.  The "DTSTART" property value always
      counts as the first occurrence.

      The BYSECOND rule part specifies a COMMA-separated list of seconds
      within a minute.  Valid values are 0 to 60.  The BYMINUTE rule
      part specifies a COMMA-separated list of minutes within an hour.
      Valid values are 0 to 59.  The BYHOUR rule part specifies a COMMA-
      separated list of hours of the day.  Valid values are 0 to 23.
      The BYSECOND, BYMINUTE and BYHOUR rule parts MUST NOT be specified
      when the associated "DTSTART" property has a DATE value type.
      These rule parts MUST be ignored in RECUR value that violate the
      above requirement (e.g., generated by applications that pre-date
      this revision of iCalendar).

      The BYDAY rule part specifies a COMMA-separated list of days of
      the week; SU indicates Sunday; MO indicates Monday; TU indicates
      Tuesday; WE indicates Wednesday; TH indicates Thursday; FR
      indicates Friday; and SA indicates Saturday.

      Each BYDAY value can also be preceded by a positive (+n) or
      negative (-n) integer.  If present, this indicates the nth
      occurrence of a specific day within the MONTHLY or YEARLY "RRULE".



Desruisseaux                Standards Track                    [Page 41]

RFC 5545                       iCalendar                  September 2009


      For example, within a MONTHLY rule, +1MO (or simply 1MO)
      represents the first Monday within the month, whereas -1MO
      represents the last Monday of the month.  The numeric value in a
      BYDAY rule part with the FREQ rule part set to YEARLY corresponds
      to an offset within the month when the BYMONTH rule part is
      present, and corresponds to an offset within the year when the
      BYWEEKNO or BYMONTH rule parts are present.  If an integer
      modifier is not present, it means all days of this type within the
      specified frequency.  For example, within a MONTHLY rule, MO
      represents all Mondays within the month.  The BYDAY rule part MUST
      NOT be specified with a numeric value when the FREQ rule part is
      not set to MONTHLY or YEARLY.  Furthermore, the BYDAY rule part
      MUST NOT be specified with a numeric value with the FREQ rule part
      set to YEARLY when the BYWEEKNO rule part is specified.

      The BYMONTHDAY rule part specifies a COMMA-separated list of days
      of the month.  Valid values are 1 to 31 or -31 to -1.  For
      example, -10 represents the tenth to the last day of the month.
      The BYMONTHDAY rule part MUST NOT be specified when the FREQ rule
      part is set to WEEKLY.

      The BYYEARDAY rule part specifies a COMMA-separated list of days
      of the year.  Valid values are 1 to 366 or -366 to -1.  For
      example, -1 represents the last day of the year (December 31st)
      and -306 represents the 306th to the last day of the year (March
      1st).  The BYYEARDAY rule part MUST NOT be specified when the FREQ
      rule part is set to DAILY, WEEKLY, or MONTHLY.

      The BYWEEKNO rule part specifies a COMMA-separated list of
      ordinals specifying weeks of the year.  Valid values are 1 to 53
      or -53 to -1.  This corresponds to weeks according to week
      numbering as defined in [ISO.8601.2004].  A week is defined as a
      seven day period, starting on the day of the week defined to be
      the week start (see WKST).  Week number one of the calendar year
      is the first week that contains at least four (4) days in that
      calendar year.  This rule part MUST NOT be used when the FREQ rule
      part is set to anything other than YEARLY.  For example, 3
      represents the third week of the year.

         Note: Assuming a Monday week start, week 53 can only occur when
         Thursday is January 1 or if it is a leap year and Wednesday is
         January 1.

      The BYMONTH rule part specifies a COMMA-separated list of months
      of the year.  Valid values are 1 to 12.

      The WKST rule part specifies the day on which the workweek starts.
      Valid values are MO, TU, WE, TH, FR, SA, and SU.  This is



Desruisseaux                Standards Track                    [Page 42]

RFC 5545                       iCalendar                  September 2009


      significant when a WEEKLY "RRULE" has an interval greater than 1,
      and a BYDAY rule part is specified.  This is also significant when
      in a YEARLY "RRULE" when a BYWEEKNO rule part is specified.  The
      default value is MO.

      The BYSETPOS rule part specifies a COMMA-separated list of values
      that corresponds to the nth occurrence within the set of
      recurrence instances specified by the rule.  BYSETPOS operates on
      a set of recurrence instances in one interval of the recurrence
      rule.  For example, in a WEEKLY rule, the interval would be one
      week A set of recurrence instances starts at the beginning of the
      interval defined by the FREQ rule part.  Valid values are 1 to 366
      or -366 to -1.  It MUST only be used in conjunction with another
      BYxxx rule part.  For example "the last work day of the month"
      could be represented as:

       FREQ=MONTHLY;BYDAY=MO,TU,WE,TH,FR;BYSETPOS=-1

      Each BYSETPOS value can include a positive (+n) or negative (-n)
      integer.  If present, this indicates the nth occurrence of the
      specific occurrence within the set of occurrences specified by the
      rule.

      Recurrence rules may generate recurrence instances with an invalid
      date (e.g., February 30) or nonexistent local time (e.g., 1:30 AM
      on a day where the local time is moved forward by an hour at 1:00
      AM).  Such recurrence instances MUST be ignored and MUST NOT be
      counted as part of the recurrence set.

      Information, not contained in the rule, necessary to determine the
      various recurrence instance start time and dates are derived from
      the Start Time ("DTSTART") component attribute.  For example,
      "FREQ=YEARLY;BYMONTH=1" doesn't specify a specific day within the
      month or a time.  This information would be the same as what is
      specified for "DTSTART".

      BYxxx rule parts modify the recurrence in some manner.  BYxxx rule
      parts for a period of time that is the same or greater than the
      frequency generally reduce or limit the number of occurrences of
      the recurrence generated.  For example, "FREQ=DAILY;BYMONTH=1"
      reduces the number of recurrence instances from all days (if
      BYMONTH rule part is not present) to all days in January.  BYxxx
      rule parts for a period of time less than the frequency generally
      increase or expand the number of occurrences of the recurrence.
      For example, "FREQ=YEARLY;BYMONTH=1,2" increases the number of
      days within the yearly recurrence set from 1 (if BYMONTH rule part
      is not present) to 2.




Desruisseaux                Standards Track                    [Page 43]

RFC 5545                       iCalendar                  September 2009


      If multiple BYxxx rule parts are specified, then after evaluating
      the specified FREQ and INTERVAL rule parts, the BYxxx rule parts
      are applied to the current set of evaluated occurrences in the
      following order: BYMONTH, BYWEEKNO, BYYEARDAY, BYMONTHDAY, BYDAY,
      BYHOUR, BYMINUTE, BYSECOND and BYSETPOS; then COUNT and UNTIL are
      evaluated.

      The table below summarizes the dependency of BYxxx rule part
      expand or limit behavior on the FREQ rule part value.

      The term "N/A" means that the corresponding BYxxx rule part MUST
      NOT be used with the corresponding FREQ value.

      BYDAY has some special behavior depending on the FREQ value and
      this is described in separate notes below the table.

   +----------+--------+--------+-------+-------+------+-------+------+
   |          |SECONDLY|MINUTELY|HOURLY |DAILY  |WEEKLY|MONTHLY|YEARLY|
   +----------+--------+--------+-------+-------+------+-------+------+
   |BYMONTH   |Limit   |Limit   |Limit  |Limit  |Limit |Limit  |Expand|
   +----------+--------+--------+-------+-------+------+-------+------+
   |BYWEEKNO  |N/A     |N/A     |N/A    |N/A    |N/A   |N/A    |Expand|
   +----------+--------+--------+-------+-------+------+-------+------+
   |BYYEARDAY |Limit   |Limit   |Limit  |N/A    |N/A   |N/A    |Expand|
   +----------+--------+--------+-------+-------+------+-------+------+
   |BYMONTHDAY|Limit   |Limit   |Limit  |Limit  |N/A   |Expand |Expand|
   +----------+--------+--------+-------+-------+------+-------+------+
   |BYDAY     |Limit   |Limit   |Limit  |Limit  |Expand|Note 1 |Note 2|
   +----------+--------+--------+-------+-------+------+-------+------+
   |BYHOUR    |Limit   |Limit   |Limit  |Expand |Expand|Expand |Expand|
   +----------+--------+--------+-------+-------+------+-------+------+
   |BYMINUTE  |Limit   |Limit   |Expand |Expand |Expand|Expand |Expand|
   +----------+--------+--------+-------+-------+------+-------+------+
   |BYSECOND  |Limit   |Expand  |Expand |Expand |Expand|Expand |Expand|
   +----------+--------+--------+-------+-------+------+-------+------+
   |BYSETPOS  |Limit   |Limit   |Limit  |Limit  |Limit |Limit  |Limit |
   +----------+--------+--------+-------+-------+------+-------+------+

      Note 1:  Limit if BYMONTHDAY is present; otherwise, special expand
               for MONTHLY.

      Note 2:  Limit if BYYEARDAY or BYMONTHDAY is present; otherwise,
               special expand for WEEKLY if BYWEEKNO present; otherwise,
               special expand for MONTHLY if BYMONTH present; otherwise,
               special expand for YEARLY.






Desruisseaux                Standards Track                    [Page 44]

RFC 5545                       iCalendar                  September 2009


      Here is an example of evaluating multiple BYxxx rule parts.

       DTSTART;TZID=America/New_York:19970105T083000
       RRULE:FREQ=YEARLY;INTERVAL=2;BYMONTH=1;BYDAY=SU;BYHOUR=8,9;
        BYMINUTE=30

      First, the "INTERVAL=2" would be applied to "FREQ=YEARLY" to
      arrive at "every other year".  Then, "BYMONTH=1" would be applied
      to arrive at "every January, every other year".  Then, "BYDAY=SU"
      would be applied to arrive at "every Sunday in January, every
      other year".  Then, "BYHOUR=8,9" would be applied to arrive at
      "every Sunday in January at 8 AM and 9 AM, every other year".
      Then, "BYMINUTE=30" would be applied to arrive at "every Sunday in
      January at 8:30 AM and 9:30 AM, every other year".  Then, lacking
      information from "RRULE", the second is derived from "DTSTART", to
      end up in "every Sunday in January at 8:30:00 AM and 9:30:00 AM,
      every other year".  Similarly, if the BYMINUTE, BYHOUR, BYDAY,
      BYMONTHDAY, or BYMONTH rule part were missing, the appropriate
      minute, hour, day, or month would have been retrieved from the
      "DTSTART" property.

      If the computed local start time of a recurrence instance does not
      exist, or occurs more than once, for the specified time zone, the
      time of the recurrence instance is interpreted in the same manner
      as an explicit DATE-TIME value describing that date and time, as
      specified in Section 3.3.5.

      No additional content value encoding (i.e., BACKSLASH character
      encoding, see Section 3.3.11) is defined for this value type.

   Example:  The following is a rule that specifies 10 occurrences that
      occur every other day:

       FREQ=DAILY;COUNT=10;INTERVAL=2

      There are other examples specified in Section 3.8.5.3.

3.3.11.  Text

   Value Name:  TEXT

   Purpose:  This value type is used to identify values that contain
      human-readable text.

   Format Definition:  This value type is defined by the following
      notation:





Desruisseaux                Standards Track                    [Page 45]

RFC 5545                       iCalendar                  September 2009


       text       = *(TSAFE-CHAR / ":" / DQUOTE / ESCAPED-CHAR)
          ; Folded according to description above

       ESCAPED-CHAR = ("\\" / "\;" / "\," / "\N" / "\n")
          ; \\ encodes \, \N or \n encodes newline
          ; \; encodes ;, \, encodes ,

       TSAFE-CHAR = WSP / %x21 / %x23-2B / %x2D-39 / %x3C-5B /
                    %x5D-7E / NON-US-ASCII
          ; Any character except CONTROLs not needed by the current
          ; character set, DQUOTE, ";", ":", "\", ","

   Description:  If the property permits, multiple TEXT values are
      specified by a COMMA-separated list of values.

      The language in which the text is represented can be controlled by
      the "LANGUAGE" property parameter.

      An intentional formatted text line break MUST only be included in
      a "TEXT" property value by representing the line break with the
      character sequence of BACKSLASH, followed by a LATIN SMALL LETTER
      N or a LATIN CAPITAL LETTER N, that is "\n" or "\N".

      The "TEXT" property values may also contain special characters
      that are used to signify delimiters, such as a COMMA character for
      lists of values or a SEMICOLON character for structured values.
      In order to support the inclusion of these special characters in
      "TEXT" property values, they MUST be escaped with a BACKSLASH
      character.  A BACKSLASH character in a "TEXT" property value MUST
      be escaped with another BACKSLASH character.  A COMMA character in
      a "TEXT" property value MUST be escaped with a BACKSLASH
      character.  A SEMICOLON character in a "TEXT" property value MUST
      be escaped with a BACKSLASH character.  However, a COLON character
      in a "TEXT" property value SHALL NOT be escaped with a BACKSLASH
      character.

   Example:  A multiple line value of:

       Project XYZ Final Review
       Conference Room - 3B
       Come Prepared.

      would be represented as:

       Project XYZ Final Review\nConference Room - 3B\nCome Prepared.






Desruisseaux                Standards Track                    [Page 46]

RFC 5545                       iCalendar                  September 2009


3.3.12.  Time

   Value Name:  TIME

   Purpose:  This value type is used to identify values that contain a
      time of day.

   Format Definition:  This value type is defined by the following
      notation:

       time         = time-hour time-minute time-second [time-utc]

       time-hour    = 2DIGIT        ;00-23
       time-minute  = 2DIGIT        ;00-59
       time-second  = 2DIGIT        ;00-60
       ;The "60" value is used to account for positive "leap" seconds.

       time-utc     = "Z"

   Description:  If the property permits, multiple "time" values are
      specified by a COMMA-separated list of values.  No additional
      content value encoding (i.e., BACKSLASH character encoding, see
      Section 3.3.11) is defined for this value type.

      The "TIME" value type is used to identify values that contain a
      time of day.  The format is based on the [ISO.8601.2004] complete
      representation, basic format for a time of day.  The text format
      consists of a two-digit, 24-hour of the day (i.e., values 00-23),
      two-digit minute in the hour (i.e., values 00-59), and two-digit
      seconds in the minute (i.e., values 00-60).  The seconds value of
      60 MUST only be used to account for positive "leap" seconds.
      Fractions of a second are not supported by this format.

      In parallel to the "DATE-TIME" definition above, the "TIME" value
      type expresses time values in three forms:

      The form of time with UTC offset MUST NOT be used.  For example,
      the following is not valid for a time value:

       230000-0800        ;Invalid time format

      FORM #1 LOCAL TIME

      The local time form is simply a time value that does not contain
      the UTC designator nor does it reference a time zone.  For
      example, 11:00 PM:

       230000



Desruisseaux                Standards Track                    [Page 47]

RFC 5545                       iCalendar                  September 2009


      Time values of this type are said to be "floating" and are not
      bound to any time zone in particular.  They are used to represent
      the same hour, minute, and second value regardless of which time
      zone is currently being observed.  For example, an event can be
      defined that indicates that an individual will be busy from 11:00
      AM to 1:00 PM every day, no matter which time zone the person is
      in.  In these cases, a local time can be specified.  The recipient
      of an iCalendar object with a property value consisting of a local
      time, without any relative time zone information, SHOULD interpret
      the value as being fixed to whatever time zone the "ATTENDEE" is
      in at any given moment.  This means that two "Attendees", may
      participate in the same event at different UTC times; floating
      time SHOULD only be used where that is reasonable behavior.

      In most cases, a fixed time is desired.  To properly communicate a
      fixed time in a property value, either UTC time or local time with
      time zone reference MUST be specified.

      The use of local time in a TIME value without the "TZID" property
      parameter is to be interpreted as floating time, regardless of the
      existence of "VTIMEZONE" calendar components in the iCalendar
      object.

      FORM #2: UTC TIME

      UTC time, or absolute time, is identified by a LATIN CAPITAL
      LETTER Z suffix character, the UTC designator, appended to the
      time value.  For example, the following represents 07:00 AM UTC:

       070000Z

      The "TZID" property parameter MUST NOT be applied to TIME
      properties whose time values are specified in UTC.

      FORM #3: LOCAL TIME AND TIME ZONE REFERENCE

      The local time with reference to time zone information form is
      identified by the use the "TZID" property parameter to reference
      the appropriate time zone definition.  "TZID" is discussed in
      detail in Section 3.2.19.

   Example:  The following represents 8:30 AM in New York in winter,
      five hours behind UTC, in each of the three formats:

       083000
       133000Z
       TZID=America/New_York:083000




Desruisseaux                Standards Track                    [Page 48]

RFC 5545                       iCalendar                  September 2009


3.3.13.  URI

   Value Name:  URI

   Purpose:  This value type is used to identify values that contain a
      uniform resource identifier (URI) type of reference to the
      property value.

   Format Definition:  This value type is defined by the following
      notation:

       uri = <As defined in Section 3 of [RFC3986]>

   Description:  This value type might be used to reference binary
      information, for values that are large, or otherwise undesirable
      to include directly in the iCalendar object.

      Property values with this value type MUST follow the generic URI
      syntax defined in [RFC3986].

      When a property parameter value is a URI value type, the URI MUST
      be specified as a quoted-string value.

      No additional content value encoding (i.e., BACKSLASH character
      encoding, see Section 3.3.11) is defined for this value type.

   Example:  The following is a URI for a network file:

       http://example.com/my-report.txt

3.3.14.  UTC Offset

   Value Name:  UTC-OFFSET

   Purpose:  This value type is used to identify properties that contain
      an offset from UTC to local time.

   Format Definition:  This value type is defined by the following
      notation:

       utc-offset = time-numzone

       time-numzone = ("+" / "-") time-hour time-minute [time-second]

   Description:  The PLUS SIGN character MUST be specified for positive
      UTC offsets (i.e., ahead of UTC).  The HYPHEN-MINUS character MUST
      be specified for negative UTC offsets (i.e., behind of UTC).  The




Desruisseaux                Standards Track                    [Page 49]

RFC 5545                       iCalendar                  September 2009


      value of "-0000" and "-000000" are not allowed.  The time-second,
      if present, MUST NOT be 60; if absent, it defaults to zero.

      No additional content value encoding (i.e., BACKSLASH character
      encoding, see Section 3.3.11) is defined for this value type.

   Example:  The following UTC offsets are given for standard time for
      New York (five hours behind UTC) and Geneva (one hour ahead of
      UTC):

       -0500

       +0100

3.4.  iCalendar Object

   The Calendaring and Scheduling Core Object is a collection of
   calendaring and scheduling information.  Typically, this information
   will consist of an iCalendar stream with a single iCalendar object.
   However, multiple iCalendar objects can be sequentially grouped
   together in an iCalendar stream.  The first line and last line of the
   iCalendar object MUST contain a pair of iCalendar object delimiter
   strings.  The syntax for an iCalendar stream is as follows:

       icalstream = 1*icalobject

       icalobject = "BEGIN" ":" "VCALENDAR" CRLF
                    icalbody
                    "END" ":" "VCALENDAR" CRLF

   The following is a simple example of an iCalendar object:

       BEGIN:VCALENDAR
       VERSION:2.0
       PRODID:-//hacksw/handcal//NONSGML v1.0//EN
       BEGIN:VEVENT
       UID:19970610T172345Z-AF23B2@example.com
       DTSTAMP:19970610T172345Z
       DTSTART:19970714T170000Z
       DTEND:19970715T040000Z
       SUMMARY:Bastille Day Party
       END:VEVENT
       END:VCALENDAR








Desruisseaux                Standards Track                    [Page 50]

RFC 5545                       iCalendar                  September 2009


3.5.  Property

   A property is the definition of an individual attribute describing a
   calendar object or a calendar component.  A property takes the form
   defined by the "contentline" notation defined in Section 3.1.

   The following is an example of a property:

       DTSTART:19960415T133000Z

   This memo imposes no ordering of properties within an iCalendar
   object.

   Property names, parameter names, and enumerated parameter values are
   case-insensitive.  For example, the property name "DUE" is the same
   as "due" and "Due", DTSTART;TZID=America/New_York:19980714T120000 is
   the same as DtStart;TzID=America/New_York:19980714T120000.

3.6.  Calendar Components

   The body of the iCalendar object consists of a sequence of calendar
   properties and one or more calendar components.  The calendar
   properties are attributes that apply to the calendar object as a
   whole.  The calendar components are collections of properties that
   express a particular calendar semantic.  For example, the calendar
   component can specify an event, a to-do, a journal entry, time zone
   information, free/busy time information, or an alarm.

   The body of the iCalendar object is defined by the following
   notation:

       icalbody   = calprops component

       calprops   = *(
                  ;
                  ; The following are REQUIRED,
                  ; but MUST NOT occur more than once.
                  ;
                  prodid / version /
                  ;
                  ; The following are OPTIONAL,
                  ; but MUST NOT occur more than once.
                  ;
                  calscale / method /
                  ;
                  ; The following are OPTIONAL,
                  ; and MAY occur more than once.
                  ;



Desruisseaux                Standards Track                    [Page 51]

RFC 5545                       iCalendar                  September 2009


                  x-prop / iana-prop
                  ;
                  )

       component  = 1*(eventc / todoc / journalc / freebusyc /
                    timezonec / iana-comp / x-comp)

       iana-comp  = "BEGIN" ":" iana-token CRLF
                    1*contentline
                    "END" ":" iana-token CRLF

       x-comp     = "BEGIN" ":" x-name CRLF
                    1*contentline
                    "END" ":" x-name CRLF

   An iCalendar object MUST include the "PRODID" and "VERSION" calendar
   properties.  In addition, it MUST include at least one calendar
   component.  Special forms of iCalendar objects are possible to
   publish just busy time (i.e., only a "VFREEBUSY" calendar component)
   or time zone (i.e., only a "VTIMEZONE" calendar component)
   information.  In addition, a complex iCalendar object that is used to
   capture a complete snapshot of the contents of a calendar is possible
   (e.g., composite of many different calendar components).  More
   commonly, an iCalendar object will consist of just a single "VEVENT",
   "VTODO", or "VJOURNAL" calendar component.  Applications MUST ignore
   x-comp and iana-comp values they don't recognize.  Applications that
   support importing iCalendar objects SHOULD support all of the
   component types defined in this document, and SHOULD NOT silently
   drop any components as that can lead to user data loss.

3.6.1.  Event Component

   Component Name:  VEVENT

   Purpose:  Provide a grouping of component properties that describe an
      event.

   Format Definition:  A "VEVENT" calendar component is defined by the
      following notation:

       eventc     = "BEGIN" ":" "VEVENT" CRLF
                    eventprop *alarmc
                    "END" ":" "VEVENT" CRLF

       eventprop  = *(
                  ;
                  ; The following are REQUIRED,
                  ; but MUST NOT occur more than once.



Desruisseaux                Standards Track                    [Page 52]

RFC 5545                       iCalendar                  September 2009


                  ;
                  dtstamp / uid /
                  ;
                  ; The following is REQUIRED if the component
                  ; appears in an iCalendar object that doesn't
                  ; specify the "METHOD" property; otherwise, it
                  ; is OPTIONAL; in any case, it MUST NOT occur
                  ; more than once.
                  ;
                  dtstart /
                  ;
                  ; The following are OPTIONAL,
                  ; but MUST NOT occur more than once.
                  ;
                  class / created / description / geo /
                  last-mod / location / organizer / priority /
                  seq / status / summary / transp /
                  url / recurid /
                  ;
                  ; The following is OPTIONAL,
                  ; but SHOULD NOT occur more than once.
                  ;
                  rrule /
                  ;
                  ; Either 'dtend' or 'duration' MAY appear in
                  ; a 'eventprop', but 'dtend' and 'duration'
                  ; MUST NOT occur in the same 'eventprop'.
                  ;
                  dtend / duration /
                  ;
                  ; The following are OPTIONAL,
                  ; and MAY occur more than once.
                  ;
                  attach / attendee / categories / comment /
                  contact / exdate / rstatus / related /
                  resources / rdate / x-prop / iana-prop
                  ;
                  )

   Description:  A "VEVENT" calendar component is a grouping of
      component properties, possibly including "VALARM" calendar
      components, that represents a scheduled amount of time on a
      calendar.  For example, it can be an activity; such as a one-hour
      long, department meeting from 8:00 AM to 9:00 AM, tomorrow.
      Generally, an event will take up time on an individual calendar.
      Hence, the event will appear as an opaque interval in a search for
      busy time.  Alternately, the event can have its Time Transparency




Desruisseaux                Standards Track                    [Page 53]

RFC 5545                       iCalendar                  September 2009


      set to "TRANSPARENT" in order to prevent blocking of the event in
      searches for busy time.

      The "VEVENT" is also the calendar component used to specify an
      anniversary or daily reminder within a calendar.  These events
      have a DATE value type for the "DTSTART" property instead of the
      default value type of DATE-TIME.  If such a "VEVENT" has a "DTEND"
      property, it MUST be specified as a DATE value also.  The
      anniversary type of "VEVENT" can span more than one date (i.e.,
      "DTEND" property value is set to a calendar date after the
      "DTSTART" property value).  If such a "VEVENT" has a "DURATION"
      property, it MUST be specified as a "dur-day" or "dur-week" value.

      The "DTSTART" property for a "VEVENT" specifies the inclusive
      start of the event.  For recurring events, it also specifies the
      very first instance in the recurrence set.  The "DTEND" property
      for a "VEVENT" calendar component specifies the non-inclusive end
      of the event.  For cases where a "VEVENT" calendar component
      specifies a "DTSTART" property with a DATE value type but no
      "DTEND" nor "DURATION" property, the event's duration is taken to
      be one day.  For cases where a "VEVENT" calendar component
      specifies a "DTSTART" property with a DATE-TIME value type but no
      "DTEND" property, the event ends on the same calendar date and
      time of day specified by the "DTSTART" property.

      The "VEVENT" calendar component cannot be nested within another
      calendar component.  However, "VEVENT" calendar components can be
      related to each other or to a "VTODO" or to a "VJOURNAL" calendar
      component with the "RELATED-TO" property.

   Example:  The following is an example of the "VEVENT" calendar
      component used to represent a meeting that will also be opaque to
      searches for busy time:

       BEGIN:VEVENT
       UID:19970901T130000Z-123401@example.com
       DTSTAMP:19970901T130000Z
       DTSTART:19970903T163000Z
       DTEND:19970903T190000Z
       SUMMARY:Annual Employee Review
       CLASS:PRIVATE
       CATEGORIES:BUSINESS,HUMAN RESOURCES
       END:VEVENT

      The following is an example of the "VEVENT" calendar component
      used to represent a reminder that will not be opaque, but rather
      transparent, to searches for busy time:




Desruisseaux                Standards Track                    [Page 54]

RFC 5545                       iCalendar                  September 2009


       BEGIN:VEVENT
       UID:19970901T130000Z-123402@example.com
       DTSTAMP:19970901T130000Z
       DTSTART:19970401T163000Z
       DTEND:19970402T010000Z
       SUMMARY:Laurel is in sensitivity awareness class.
       CLASS:PUBLIC
       CATEGORIES:BUSINESS,HUMAN RESOURCES
       TRANSP:TRANSPARENT
       END:VEVENT

      The following is an example of the "VEVENT" calendar component
      used to represent an anniversary that will occur annually:

       BEGIN:VEVENT
       UID:19970901T130000Z-123403@example.com
       DTSTAMP:19970901T130000Z
       DTSTART;VALUE=DATE:19971102
       SUMMARY:Our Blissful Anniversary
       TRANSP:TRANSPARENT
       CLASS:CONFIDENTIAL
       CATEGORIES:ANNIVERSARY,PERSONAL,SPECIAL OCCASION
       RRULE:FREQ=YEARLY
       END:VEVENT

      The following is an example of the "VEVENT" calendar component
      used to represent a multi-day event scheduled from June 28th, 2007
      to July 8th, 2007 inclusively.  Note that the "DTEND" property is
      set to July 9th, 2007, since the "DTEND" property specifies the
      non-inclusive end of the event.

       BEGIN:VEVENT
       UID:20070423T123432Z-541111@example.com
       DTSTAMP:20070423T123432Z
       DTSTART;VALUE=DATE:20070628
       DTEND;VALUE=DATE:20070709
       SUMMARY:Festival International de Jazz de Montreal
       TRANSP:TRANSPARENT
       END:VEVENT

3.6.2.  To-Do Component

   Component Name:  VTODO

   Purpose:  Provide a grouping of calendar properties that describe a
      to-do.





Desruisseaux                Standards Track                    [Page 55]

RFC 5545                       iCalendar                  September 2009


   Format Definition:  A "VTODO" calendar component is defined by the
      following notation:

       todoc      = "BEGIN" ":" "VTODO" CRLF
                    todoprop *alarmc
                    "END" ":" "VTODO" CRLF

       todoprop   = *(
                  ;
                  ; The following are REQUIRED,
                  ; but MUST NOT occur more than once.
                  ;
                  dtstamp / uid /
                  ;
                  ; The following are OPTIONAL,
                  ; but MUST NOT occur more than once.
                  ;
                  class / completed / created / description /
                  dtstart / geo / last-mod / location / organizer /
                  percent / priority / recurid / seq / status /
                  summary / url /
                  ;
                  ; The following is OPTIONAL,
                  ; but SHOULD NOT occur more than once.
                  ;
                  rrule /
                  ;
                  ; Either 'due' or 'duration' MAY appear in
                  ; a 'todoprop', but 'due' and 'duration'
                  ; MUST NOT occur in the same 'todoprop'.
                  ; If 'duration' appear in a 'todoprop',
                  ; then 'dtstart' MUST also appear in
                  ; the same 'todoprop'.
                  ;
                  due / duration /
                  ;
                  ; The following are OPTIONAL,
                  ; and MAY occur more than once.
                  ;
                  attach / attendee / categories / comment / contact /
                  exdate / rstatus / related / resources /
                  rdate / x-prop / iana-prop
                  ;
                  )

   Description:  A "VTODO" calendar component is a grouping of component
      properties and possibly "VALARM" calendar components that
      represent an action-item or assignment.  For example, it can be



Desruisseaux                Standards Track                    [Page 56]

RFC 5545                       iCalendar                  September 2009


      used to represent an item of work assigned to an individual; such
      as "turn in travel expense today".

      The "VTODO" calendar component cannot be nested within another
      calendar component.  However, "VTODO" calendar components can be
      related to each other or to a "VEVENT" or to a "VJOURNAL" calendar
      component with the "RELATED-TO" property.

      A "VTODO" calendar component without the "DTSTART" and "DUE" (or
      "DURATION") properties specifies a to-do that will be associated
      with each successive calendar date, until it is completed.

   Examples:  The following is an example of a "VTODO" calendar
      component that needs to be completed before May 1st, 2007.  On
      midnight May 1st, 2007 this to-do would be considered overdue.

       BEGIN:VTODO
       UID:20070313T123432Z-456553@example.com
       DTSTAMP:20070313T123432Z
       DUE;VALUE=DATE:20070501
       SUMMARY:Submit Quebec Income Tax Return for 2006
       CLASS:CONFIDENTIAL
       CATEGORIES:FAMILY,FINANCE
       STATUS:NEEDS-ACTION
       END:VTODO

      The following is an example of a "VTODO" calendar component that
      was due before 1:00 P.M. UTC on July 9th, 2007 and was completed
      on July 7th, 2007 at 10:00 A.M. UTC.

       BEGIN:VTODO
       UID:20070514T103211Z-123404@example.com
       DTSTAMP:20070514T103211Z
       DTSTART:20070514T110000Z
       DUE:20070709T130000Z
       COMPLETED:20070707T100000Z
       SUMMARY:Submit Revised Internet-Draft
       PRIORITY:1
       STATUS:NEEDS-ACTION
       END:VTODO

3.6.3.  Journal Component

   Component Name:  VJOURNAL

   Purpose:  Provide a grouping of component properties that describe a
      journal entry.




Desruisseaux                Standards Track                    [Page 57]

RFC 5545                       iCalendar                  September 2009


   Format Definition:  A "VJOURNAL" calendar component is defined by the
      following notation:

       journalc   = "BEGIN" ":" "VJOURNAL" CRLF
                    jourprop
                    "END" ":" "VJOURNAL" CRLF

       jourprop   = *(
                  ;
                  ; The following are REQUIRED,
                  ; but MUST NOT occur more than once.
                  ;
                  dtstamp / uid /
                  ;
                  ; The following are OPTIONAL,
                  ; but MUST NOT occur more than once.
                  ;
                  class / created / dtstart /
                  last-mod / organizer / recurid / seq /
                  status / summary / url /
                  ;
                  ; The following is OPTIONAL,
                  ; but SHOULD NOT occur more than once.
                  ;
                  rrule /
                  ;
                  ; The following are OPTIONAL,
                  ; and MAY occur more than once.
                  ;
                  attach / attendee / categories / comment /
                  contact / description / exdate / related / rdate /
                  rstatus / x-prop / iana-prop
                  ;
                  )

   Description:  A "VJOURNAL" calendar component is a grouping of
      component properties that represent one or more descriptive text
      notes associated with a particular calendar date.  The "DTSTART"
      property is used to specify the calendar date with which the
      journal entry is associated.  Generally, it will have a DATE value
      data type, but it can also be used to specify a DATE-TIME value
      data type.  Examples of a journal entry include a daily record of
      a legislative body or a journal entry of individual telephone
      contacts for the day or an ordered list of accomplishments for the
      day.  The "VJOURNAL" calendar component can also be used to
      associate a document with a calendar date.





Desruisseaux                Standards Track                    [Page 58]

RFC 5545                       iCalendar                  September 2009


      The "VJOURNAL" calendar component does not take up time on a
      calendar.  Hence, it does not play a role in free or busy time
      searches -- it is as though it has a time transparency value of
      TRANSPARENT.  It is transparent to any such searches.

      The "VJOURNAL" calendar component cannot be nested within another
      calendar component.  However, "VJOURNAL" calendar components can
      be related to each other or to a "VEVENT" or to a "VTODO" calendar
      component, with the "RELATED-TO" property.

   Example:  The following is an example of the "VJOURNAL" calendar
      component:

       BEGIN:VJOURNAL
       UID:19970901T130000Z-123405@example.com
       DTSTAMP:19970901T130000Z
       DTSTART;VALUE=DATE:19970317
       SUMMARY:Staff meeting minutes
       DESCRIPTION:1. Staff meeting: Participants include Joe\,
         Lisa\, and Bob. Aurora project plans were reviewed.
         There is currently no budget reserves for this project.
         Lisa will escalate to management. Next meeting on Tuesday.\n
        2. Telephone Conference: ABC Corp. sales representative
         called to discuss new printer. Promised to get us a demo by
         Friday.\n3. Henry Miller (Handsoff Insurance): Car was
         totaled by tree. Is looking into a loaner car. 555-2323
         (tel).
       END:VJOURNAL

3.6.4.  Free/Busy Component

   Component Name:  VFREEBUSY

   Purpose:  Provide a grouping of component properties that describe
      either a request for free/busy time, describe a response to a
      request for free/busy time, or describe a published set of busy
      time.

   Format Definition:  A "VFREEBUSY" calendar component is defined by
      the following notation:

       freebusyc  = "BEGIN" ":" "VFREEBUSY" CRLF
                    fbprop
                    "END" ":" "VFREEBUSY" CRLF

       fbprop     = *(
                  ;
                  ; The following are REQUIRED,



Desruisseaux                Standards Track                    [Page 59]

RFC 5545                       iCalendar                  September 2009


                  ; but MUST NOT occur more than once.
                  ;
                  dtstamp / uid /
                  ;
                  ; The following are OPTIONAL,
                  ; but MUST NOT occur more than once.
                  ;
                  contact / dtstart / dtend /
                  organizer / url /
                  ;
                  ; The following are OPTIONAL,
                  ; and MAY occur more than once.
                  ;
                  attendee / comment / freebusy / rstatus / x-prop /
                  iana-prop
                  ;
                  )

   Description:  A "VFREEBUSY" calendar component is a grouping of
      component properties that represents either a request for free or
      busy time information, a reply to a request for free or busy time
      information, or a published set of busy time information.

      When used to request free/busy time information, the "ATTENDEE"
      property specifies the calendar users whose free/busy time is
      being requested; the "ORGANIZER" property specifies the calendar
      user who is requesting the free/busy time; the "DTSTART" and
      "DTEND" properties specify the window of time for which the free/
      busy time is being requested; the "UID" and "DTSTAMP" properties
      are specified to assist in proper sequencing of multiple free/busy
      time requests.

      When used to reply to a request for free/busy time, the "ATTENDEE"
      property specifies the calendar user responding to the free/busy
      time request; the "ORGANIZER" property specifies the calendar user
      that originally requested the free/busy time; the "FREEBUSY"
      property specifies the free/busy time information (if it exists);
      and the "UID" and "DTSTAMP" properties are specified to assist in
      proper sequencing of multiple free/busy time replies.

      When used to publish busy time, the "ORGANIZER" property specifies
      the calendar user associated with the published busy time; the
      "DTSTART" and "DTEND" properties specify an inclusive time window
      that surrounds the busy time information; the "FREEBUSY" property
      specifies the published busy time information; and the "DTSTAMP"
      property specifies the DATE-TIME that iCalendar object was
      created.




Desruisseaux                Standards Track                    [Page 60]

RFC 5545                       iCalendar                  September 2009


      The "VFREEBUSY" calendar component cannot be nested within another
      calendar component.  Multiple "VFREEBUSY" calendar components can
      be specified within an iCalendar object.  This permits the
      grouping of free/busy information into logical collections, such
      as monthly groups of busy time information.

      The "VFREEBUSY" calendar component is intended for use in
      iCalendar object methods involving requests for free time,
      requests for busy time, requests for both free and busy, and the
      associated replies.

      Free/Busy information is represented with the "FREEBUSY" property.
      This property provides a terse representation of time periods.
      One or more "FREEBUSY" properties can be specified in the
      "VFREEBUSY" calendar component.

      When present in a "VFREEBUSY" calendar component, the "DTSTART"
      and "DTEND" properties SHOULD be specified prior to any "FREEBUSY"
      properties.

      The recurrence properties ("RRULE", "RDATE", "EXDATE") are not
      permitted within a "VFREEBUSY" calendar component.  Any recurring
      events are resolved into their individual busy time periods using
      the "FREEBUSY" property.

   Example:  The following is an example of a "VFREEBUSY" calendar
      component used to request free or busy time information:

       BEGIN:VFREEBUSY
       UID:19970901T082949Z-FA43EF@example.com
       ORGANIZER:mailto:jane_doe@example.com
       ATTENDEE:mailto:john_public@example.com
       DTSTART:19971015T050000Z
       DTEND:19971016T050000Z
       DTSTAMP:19970901T083000Z
       END:VFREEBUSY















Desruisseaux                Standards Track                    [Page 61]

RFC 5545                       iCalendar                  September 2009


      The following is an example of a "VFREEBUSY" calendar component
      used to reply to the request with busy time information:

       BEGIN:VFREEBUSY
       UID:19970901T095957Z-76A912@example.com
       ORGANIZER:mailto:jane_doe@example.com
       ATTENDEE:mailto:john_public@example.com
       DTSTAMP:19970901T100000Z
       FREEBUSY:19971015T050000Z/PT8H30M,
        19971015T160000Z/PT5H30M,19971015T223000Z/PT6H30M
       URL:http://example.com/pub/busy/jpublic-01.ifb
       COMMENT:This iCalendar file contains busy time information for
         the next three months.
       END:VFREEBUSY

      The following is an example of a "VFREEBUSY" calendar component
      used to publish busy time information:

       BEGIN:VFREEBUSY
       UID:19970901T115957Z-76A912@example.com
       DTSTAMP:19970901T120000Z
       ORGANIZER:jsmith@example.com
       DTSTART:19980313T141711Z
       DTEND:19980410T141711Z
       FREEBUSY:19980314T233000Z/19980315T003000Z
       FREEBUSY:19980316T153000Z/19980316T163000Z
       FREEBUSY:19980318T030000Z/19980318T040000Z
       URL:http://www.example.com/calendar/busytime/jsmith.ifb
       END:VFREEBUSY

3.6.5.  Time Zone Component

   Component Name:  VTIMEZONE

   Purpose:  Provide a grouping of component properties that defines a
      time zone.

   Format Definition:  A "VTIMEZONE" calendar component is defined by
      the following notation:

       timezonec  = "BEGIN" ":" "VTIMEZONE" CRLF
                    *(
                    ;
                    ; 'tzid' is REQUIRED, but MUST NOT occur more
                    ; than once.
                    ;
                    tzid /
                    ;



Desruisseaux                Standards Track                    [Page 62]

RFC 5545                       iCalendar                  September 2009


                    ; 'last-mod' and 'tzurl' are OPTIONAL,
                    ; but MUST NOT occur more than once.
                    ;
                    last-mod / tzurl /
                    ;
                    ; One of 'standardc' or 'daylightc' MUST occur
                    ; and each MAY occur more than once.
                    ;
                    standardc / daylightc /
                    ;
                    ; The following are OPTIONAL,
                    ; and MAY occur more than once.
                    ;
                    x-prop / iana-prop
                    ;
                    )
                    "END" ":" "VTIMEZONE" CRLF

       standardc  = "BEGIN" ":" "STANDARD" CRLF
                    tzprop
                    "END" ":" "STANDARD" CRLF

       daylightc  = "BEGIN" ":" "DAYLIGHT" CRLF
                    tzprop
                    "END" ":" "DAYLIGHT" CRLF

       tzprop     = *(
                    ;
                    ; The following are REQUIRED,
                    ; but MUST NOT occur more than once.
                    ;
                    dtstart / tzoffsetto / tzoffsetfrom /
                    ;
                    ; The following is OPTIONAL,
                    ; but SHOULD NOT occur more than once.
                    ;
                    rrule /
                    ;
                    ; The following are OPTIONAL,
                    ; and MAY occur more than once.
                    ;
                    comment / rdate / tzname / x-prop / iana-prop
                    ;
                    )

   Description:  A time zone is unambiguously defined by the set of time
      measurement rules determined by the governing body for a given
      geographic area.  These rules describe, at a minimum, the base



Desruisseaux                Standards Track                    [Page 63]

RFC 5545                       iCalendar                  September 2009


      offset from UTC for the time zone, often referred to as the
      Standard Time offset.  Many locations adjust their Standard Time
      forward or backward by one hour, in order to accommodate seasonal
      changes in number of daylight hours, often referred to as Daylight
      Saving Time.  Some locations adjust their time by a fraction of an
      hour.  Standard Time is also known as Winter Time.  Daylight
      Saving Time is also known as Advanced Time, Summer Time, or Legal
      Time in certain countries.  The following table shows the changes
      in time zone rules in effect for New York City starting from 1967.
      Each line represents a description or rule for a particular
      observance.

                         Effective Observance Rule

     +-----------+--------------------------+--------+--------------+
     | Date      | (Date-Time)              | Offset | Abbreviation |
     +-----------+--------------------------+--------+--------------+
     | 1967-1973 | last Sun in Apr, 02:00   | -0400  | EDT          |
     |           |                          |        |              |
     | 1967-2006 | last Sun in Oct, 02:00   | -0500  | EST          |
     |           |                          |        |              |
     | 1974-1974 | Jan 6, 02:00             | -0400  | EDT          |
     |           |                          |        |              |
     | 1975-1975 | Feb 23, 02:00            | -0400  | EDT          |
     |           |                          |        |              |
     | 1976-1986 | last Sun in Apr, 02:00   | -0400  | EDT          |
     |           |                          |        |              |
     | 1987-2006 | first Sun in Apr, 02:00  | -0400  | EDT          |
     |           |                          |        |              |
     | 2007-*    | second Sun in Mar, 02:00 | -0400  | EDT          |
     |           |                          |        |              |
     | 2007-*    | first Sun in Nov, 02:00  | -0500  | EST          |
     +-----------+--------------------------+--------+--------------+

   Note: The specification of a global time zone registry is not
         addressed by this document and is left for future study.
         However, implementers may find the TZ database [TZDB] a useful
         reference.  It is an informal, public-domain collection of time
         zone information, which is currently being maintained by
         volunteer Internet participants, and is used in several
         operating systems.  This database contains current and
         historical time zone information for a wide variety of
         locations around the globe; it provides a time zone identifier
         for every unique time zone rule set in actual use since 1970,
         with historical data going back to the introduction of standard
         time.





Desruisseaux                Standards Track                    [Page 64]

RFC 5545                       iCalendar                  September 2009


      Interoperability between two calendaring and scheduling
      applications, especially for recurring events, to-dos or journal
      entries, is dependent on the ability to capture and convey date
      and time information in an unambiguous format.  The specification
      of current time zone information is integral to this behavior.

      If present, the "VTIMEZONE" calendar component defines the set of
      Standard Time and Daylight Saving Time observances (or rules) for
      a particular time zone for a given interval of time.  The
      "VTIMEZONE" calendar component cannot be nested within other
      calendar components.  Multiple "VTIMEZONE" calendar components can
      exist in an iCalendar object.  In this situation, each "VTIMEZONE"
      MUST represent a unique time zone definition.  This is necessary
      for some classes of events, such as airline flights, that start in
      one time zone and end in another.

      The "VTIMEZONE" calendar component MUST include the "TZID"
      property and at least one definition of a "STANDARD" or "DAYLIGHT"
      sub-component.  The "STANDARD" or "DAYLIGHT" sub-component MUST
      include the "DTSTART", "TZOFFSETFROM", and "TZOFFSETTO"
      properties.

      An individual "VTIMEZONE" calendar component MUST be specified for
      each unique "TZID" parameter value specified in the iCalendar
      object.  In addition, a "VTIMEZONE" calendar component, referred
      to by a recurring calendar component, MUST provide valid time zone
      information for all recurrence instances.

      Each "VTIMEZONE" calendar component consists of a collection of
      one or more sub-components that describe the rule for a particular
      observance (either a Standard Time or a Daylight Saving Time
      observance).  The "STANDARD" sub-component consists of a
      collection of properties that describe Standard Time.  The
      "DAYLIGHT" sub-component consists of a collection of properties
      that describe Daylight Saving Time.  In general, this collection
      of properties consists of:

      *  the first onset DATE-TIME for the observance;

      *  the last onset DATE-TIME for the observance, if a last onset is
         known;

      *  the offset to be applied for the observance;

      *  a rule that describes the day and time when the observance
         takes effect;

      *  an optional name for the observance.



Desruisseaux                Standards Track                    [Page 65]

RFC 5545                       iCalendar                  September 2009


      For a given time zone, there may be multiple unique definitions of
      the observances over a period of time.  Each observance is
      described using either a "STANDARD" or "DAYLIGHT" sub-component.
      The collection of these sub-components is used to describe the
      time zone for a given period of time.  The offset to apply at any
      given time is found by locating the observance that has the last
      onset date and time before the time in question, and using the
      offset value from that observance.

      The top-level properties in a "VTIMEZONE" calendar component are:

      The mandatory "TZID" property is a text value that uniquely
      identifies the "VTIMEZONE" calendar component within the scope of
      an iCalendar object.

      The optional "LAST-MODIFIED" property is a UTC value that
      specifies the date and time that this time zone definition was
      last updated.

      The optional "TZURL" property is a url value that points to a
      published "VTIMEZONE" definition.  "TZURL" SHOULD refer to a
      resource that is accessible by anyone who might need to interpret
      the object.  This SHOULD NOT normally be a "file" URL or other URL
      that is not widely accessible.

      The collection of properties that are used to define the
      "STANDARD" and "DAYLIGHT" sub-components include:

      The mandatory "DTSTART" property gives the effective onset date
      and local time for the time zone sub-component definition.
      "DTSTART" in this usage MUST be specified as a date with a local
      time value.

      The mandatory "TZOFFSETFROM" property gives the UTC offset that is
      in use when the onset of this time zone observance begins.
      "TZOFFSETFROM" is combined with "DTSTART" to define the effective
      onset for the time zone sub-component definition.  For example,
      the following represents the time at which the observance of
      Standard Time took effect in Fall 1967 for New York City:

       DTSTART:19671029T020000

       TZOFFSETFROM:-0400

      The mandatory "TZOFFSETTO" property gives the UTC offset for the
      time zone sub-component (Standard Time or Daylight Saving Time)
      when this observance is in use.




Desruisseaux                Standards Track                    [Page 66]

RFC 5545                       iCalendar                  September 2009


      The optional "TZNAME" property is the customary name for the time
      zone.  This could be used for displaying dates.

      The onset DATE-TIME values for the observance defined by the time
      zone sub-component is defined by the "DTSTART", "RRULE", and
      "RDATE" properties.

      The "RRULE" property defines the recurrence rule for the onset of
      the observance defined by this time zone sub-component.  Some
      specific requirements for the usage of "RRULE" for this purpose
      include:

      *  If observance is known to have an effective end date, the
         "UNTIL" recurrence rule parameter MUST be used to specify the
         last valid onset of this observance (i.e., the UNTIL DATE-TIME
         will be equal to the last instance generated by the recurrence
         pattern).  It MUST be specified in UTC time.

      *  The "DTSTART" and the "TZOFFSETFROM" properties MUST be used
         when generating the onset DATE-TIME values (instances) from the
         "RRULE".

      The "RDATE" property can also be used to define the onset of the
      observance by giving the individual onset date and times.  "RDATE"
      in this usage MUST be specified as a date with local time value,
      relative to the UTC offset specified in the "TZOFFSETFROM"
      property.

      The optional "COMMENT" property is also allowed for descriptive
      explanatory text.

   Example:  The following are examples of the "VTIMEZONE" calendar
      component:

      This is an example showing all the time zone rules for New York
      City since April 30, 1967 at 03:00:00 EDT.

       BEGIN:VTIMEZONE
       TZID:America/New_York
       LAST-MODIFIED:20050809T050000Z
       BEGIN:DAYLIGHT
       DTSTART:19670430T020000
       RRULE:FREQ=YEARLY;BYMONTH=4;BYDAY=-1SU;UNTIL=19730429T070000Z
       TZOFFSETFROM:-0500
       TZOFFSETTO:-0400
       TZNAME:EDT
       END:DAYLIGHT
       BEGIN:STANDARD



Desruisseaux                Standards Track                    [Page 67]

RFC 5545                       iCalendar                  September 2009


       DTSTART:19671029T020000
       RRULE:FREQ=YEARLY;BYMONTH=10;BYDAY=-1SU;UNTIL=20061029T060000Z
       TZOFFSETFROM:-0400
       TZOFFSETTO:-0500
       TZNAME:EST
       END:STANDARD
       BEGIN:DAYLIGHT
       DTSTART:19740106T020000
       RDATE:19750223T020000
       TZOFFSETFROM:-0500
       TZOFFSETTO:-0400
       TZNAME:EDT
       END:DAYLIGHT
       BEGIN:DAYLIGHT
       DTSTART:19760425T020000
       RRULE:FREQ=YEARLY;BYMONTH=4;BYDAY=-1SU;UNTIL=19860427T070000Z
       TZOFFSETFROM:-0500
       TZOFFSETTO:-0400
       TZNAME:EDT
       END:DAYLIGHT
       BEGIN:DAYLIGHT
       DTSTART:19870405T020000
       RRULE:FREQ=YEARLY;BYMONTH=4;BYDAY=1SU;UNTIL=20060402T070000Z
       TZOFFSETFROM:-0500
       TZOFFSETTO:-0400
       TZNAME:EDT
       END:DAYLIGHT
       BEGIN:DAYLIGHT
       DTSTART:20070311T020000
       RRULE:FREQ=YEARLY;BYMONTH=3;BYDAY=2SU
       TZOFFSETFROM:-0500
       TZOFFSETTO:-0400
       TZNAME:EDT
       END:DAYLIGHT
       BEGIN:STANDARD
       DTSTART:20071104T020000
       RRULE:FREQ=YEARLY;BYMONTH=11;BYDAY=1SU
       TZOFFSETFROM:-0400
       TZOFFSETTO:-0500
       TZNAME:EST
       END:STANDARD
       END:VTIMEZONE

      This is an example showing time zone information for New York City
      using only the "DTSTART" property.  Note that this is only
      suitable for a recurring event that starts on or later than March
      11, 2007 at 03:00:00 EDT (i.e., the earliest effective transition
      date and time) and ends no later than March 9, 2008 at 01:59:59



Desruisseaux                Standards Track                    [Page 68]

RFC 5545                       iCalendar                  September 2009


      EST (i.e., latest valid date and time for EST in this scenario).
      For example, this can be used for a recurring event that occurs
      every Friday, 8:00 A.M.-9:00 A.M., starting June 1, 2007, ending
      December 31, 2007,

       BEGIN:VTIMEZONE
       TZID:America/New_York
       LAST-MODIFIED:20050809T050000Z
       BEGIN:STANDARD
       DTSTART:20071104T020000
       TZOFFSETFROM:-0400
       TZOFFSETTO:-0500
       TZNAME:EST
       END:STANDARD
       BEGIN:DAYLIGHT
       DTSTART:20070311T020000
       TZOFFSETFROM:-0500
       TZOFFSETTO:-0400
       TZNAME:EDT
       END:DAYLIGHT
       END:VTIMEZONE

      This is a simple example showing the current time zone rules for
      New York City using a "RRULE" recurrence pattern.  Note that there
      is no effective end date to either of the Standard Time or
      Daylight Time rules.  This information would be valid for a
      recurring event starting today and continuing indefinitely.

       BEGIN:VTIMEZONE
       TZID:America/New_York
       LAST-MODIFIED:20050809T050000Z
       TZURL:http://zones.example.com/tz/America-New_York.ics
       BEGIN:STANDARD
       DTSTART:20071104T020000
       RRULE:FREQ=YEARLY;BYMONTH=11;BYDAY=1SU
       TZOFFSETFROM:-0400
       TZOFFSETTO:-0500
       TZNAME:EST
       END:STANDARD
       BEGIN:DAYLIGHT
       DTSTART:20070311T020000
       RRULE:FREQ=YEARLY;BYMONTH=3;BYDAY=2SU
       TZOFFSETFROM:-0500
       TZOFFSETTO:-0400
       TZNAME:EDT
       END:DAYLIGHT
       END:VTIMEZONE




Desruisseaux                Standards Track                    [Page 69]

RFC 5545                       iCalendar                  September 2009


      This is an example showing a set of rules for a fictitious time
      zone where the Daylight Time rule has an effective end date (i.e.,
      after that date, Daylight Time is no longer observed).

       BEGIN:VTIMEZONE
       TZID:Fictitious
       LAST-MODIFIED:19870101T000000Z
       BEGIN:STANDARD
       DTSTART:19671029T020000
       RRULE:FREQ=YEARLY;BYDAY=-1SU;BYMONTH=10
       TZOFFSETFROM:-0400
       TZOFFSETTO:-0500
       TZNAME:EST
       END:STANDARD
       BEGIN:DAYLIGHT
       DTSTART:19870405T020000
       RRULE:FREQ=YEARLY;BYDAY=1SU;BYMONTH=4;UNTIL=19980404T070000Z
       TZOFFSETFROM:-0500
       TZOFFSETTO:-0400
       TZNAME:EDT
       END:DAYLIGHT
       END:VTIMEZONE





























Desruisseaux                Standards Track                    [Page 70]

RFC 5545                       iCalendar                  September 2009


      This is an example showing a set of rules for a fictitious time
      zone where the first Daylight Time rule has an effective end date.
      There is a second Daylight Time rule that picks up where the other
      left off.

       BEGIN:VTIMEZONE
       TZID:Fictitious
       LAST-MODIFIED:19870101T000000Z
       BEGIN:STANDARD
       DTSTART:19671029T020000
       RRULE:FREQ=YEARLY;BYDAY=-1SU;BYMONTH=10
       TZOFFSETFROM:-0400
       TZOFFSETTO:-0500
       TZNAME:EST
       END:STANDARD
       BEGIN:DAYLIGHT
       DTSTART:19870405T020000
       RRULE:FREQ=YEARLY;BYDAY=1SU;BYMONTH=4;UNTIL=19980404T070000Z
       TZOFFSETFROM:-0500
       TZOFFSETTO:-0400
       TZNAME:EDT
       END:DAYLIGHT
       BEGIN:DAYLIGHT
       DTSTART:19990424T020000
       RRULE:FREQ=YEARLY;BYDAY=-1SU;BYMONTH=4
       TZOFFSETFROM:-0500
       TZOFFSETTO:-0400
       TZNAME:EDT
       END:DAYLIGHT
       END:VTIMEZONE

3.6.6.  Alarm Component

   Component Name:  VALARM

   Purpose:  Provide a grouping of component properties that define an
      alarm.

   Format Definition:  A "VALARM" calendar component is defined by the
      following notation:

       alarmc     = "BEGIN" ":" "VALARM" CRLF
                    (audioprop / dispprop / emailprop)
                    "END" ":" "VALARM" CRLF

       audioprop  = *(
                  ;
                  ; 'action' and 'trigger' are both REQUIRED,



Desruisseaux                Standards Track                    [Page 71]

RFC 5545                       iCalendar                  September 2009


                  ; but MUST NOT occur more than once.
                  ;
                  action / trigger /
                  ;
                  ; 'duration' and 'repeat' are both OPTIONAL,
                  ; and MUST NOT occur more than once each;
                  ; but if one occurs, so MUST the other.
                  ;
                  duration / repeat /
                  ;
                  ; The following is OPTIONAL,
                  ; but MUST NOT occur more than once.
                  ;
                  attach /
                  ;
                  ; The following is OPTIONAL,
                  ; and MAY occur more than once.
                  ;
                  x-prop / iana-prop
                  ;
                  )

       dispprop   = *(
                  ;
                  ; The following are REQUIRED,
                  ; but MUST NOT occur more than once.
                  ;
                  action / description / trigger /
                  ;
                  ; 'duration' and 'repeat' are both OPTIONAL,
                  ; and MUST NOT occur more than once each;
                  ; but if one occurs, so MUST the other.
                  ;
                  duration / repeat /
                  ;
                  ; The following is OPTIONAL,
                  ; and MAY occur more than once.
                  ;
                  x-prop / iana-prop
                  ;
                  )

       emailprop  = *(
                  ;
                  ; The following are all REQUIRED,
                  ; but MUST NOT occur more than once.
                  ;
                  action / description / trigger / summary /



Desruisseaux                Standards Track                    [Page 72]

RFC 5545                       iCalendar                  September 2009


                  ;
                  ; The following is REQUIRED,
                  ; and MAY occur more than once.
                  ;
                  attendee /
                  ;
                  ; 'duration' and 'repeat' are both OPTIONAL,
                  ; and MUST NOT occur more than once each;
                  ; but if one occurs, so MUST the other.
                  ;
                  duration / repeat /
                  ;
                  ; The following are OPTIONAL,
                  ; and MAY occur more than once.
                  ;
                  attach / x-prop / iana-prop
                  ;
                  )

   Description:  A "VALARM" calendar component is a grouping of
      component properties that is a reminder or alarm for an event or a
      to-do.  For example, it may be used to define a reminder for a
      pending event or an overdue to-do.

      The "VALARM" calendar component MUST include the "ACTION" and
      "TRIGGER" properties.  The "ACTION" property further constrains
      the "VALARM" calendar component in the following ways:

      When the action is "AUDIO", the alarm can also include one and
      only one "ATTACH" property, which MUST point to a sound resource,
      which is rendered when the alarm is triggered.

      When the action is "DISPLAY", the alarm MUST also include a
      "DESCRIPTION" property, which contains the text to be displayed
      when the alarm is triggered.

      When the action is "EMAIL", the alarm MUST include a "DESCRIPTION"
      property, which contains the text to be used as the message body,
      a "SUMMARY" property, which contains the text to be used as the
      message subject, and one or more "ATTENDEE" properties, which
      contain the email address of attendees to receive the message.  It
      can also include one or more "ATTACH" properties, which are
      intended to be sent as message attachments.  When the alarm is
      triggered, the email message is sent.

      The "VALARM" calendar component MUST only appear within either a
      "VEVENT" or "VTODO" calendar component.  "VALARM" calendar
      components cannot be nested.  Multiple mutually independent



Desruisseaux                Standards Track                    [Page 73]

RFC 5545                       iCalendar                  September 2009


      "VALARM" calendar components can be specified for a single
      "VEVENT" or "VTODO" calendar component.

      The "TRIGGER" property specifies when the alarm will be triggered.
      The "TRIGGER" property specifies a duration prior to the start of
      an event or a to-do.  The "TRIGGER" edge may be explicitly set to
      be relative to the "START" or "END" of the event or to-do with the
      "RELATED" parameter of the "TRIGGER" property.  The "TRIGGER"
      property value type can alternatively be set to an absolute
      calendar date with UTC time.

      In an alarm set to trigger on the "START" of an event or to-do,
      the "DTSTART" property MUST be present in the associated event or
      to-do.  In an alarm in a "VEVENT" calendar component set to
      trigger on the "END" of the event, either the "DTEND" property
      MUST be present, or the "DTSTART" and "DURATION" properties MUST
      both be present.  In an alarm in a "VTODO" calendar component set
      to trigger on the "END" of the to-do, either the "DUE" property
      MUST be present, or the "DTSTART" and "DURATION" properties MUST
      both be present.

      The alarm can be defined such that it triggers repeatedly.  A
      definition of an alarm with a repeating trigger MUST include both
      the "DURATION" and "REPEAT" properties.  The "DURATION" property
      specifies the delay period, after which the alarm will repeat.
      The "REPEAT" property specifies the number of additional
      repetitions that the alarm will be triggered.  This repetition
      count is in addition to the initial triggering of the alarm.  Both
      of these properties MUST be present in order to specify a
      repeating alarm.  If one of these two properties is absent, then
      the alarm will not repeat beyond the initial trigger.

      The "ACTION" property is used within the "VALARM" calendar
      component to specify the type of action invoked when the alarm is
      triggered.  The "VALARM" properties provide enough information for
      a specific action to be invoked.  It is typically the
      responsibility of a "Calendar User Agent" (CUA) to deliver the
      alarm in the specified fashion.  An "ACTION" property value of
      AUDIO specifies an alarm that causes a sound to be played to alert
      the user; DISPLAY specifies an alarm that causes a text message to
      be displayed to the user; and EMAIL specifies an alarm that causes
      an electronic email message to be delivered to one or more email
      addresses.

      In an AUDIO alarm, if the optional "ATTACH" property is included,
      it MUST specify an audio sound resource.  The intention is that
      the sound will be played as the alarm effect.  If an "ATTACH"
      property is specified that does not refer to a sound resource, or



Desruisseaux                Standards Track                    [Page 74]

RFC 5545                       iCalendar                  September 2009


      if the specified sound resource cannot be rendered (because its
      format is unsupported, or because it cannot be retrieved), then
      the CUA or other entity responsible for playing the sound may
      choose a fallback action, such as playing a built-in default
      sound, or playing no sound at all.

      In a DISPLAY alarm, the intended alarm effect is for the text
      value of the "DESCRIPTION" property to be displayed to the user.

      In an EMAIL alarm, the intended alarm effect is for an email
      message to be composed and delivered to all the addresses
      specified by the "ATTENDEE" properties in the "VALARM" calendar
      component.  The "DESCRIPTION" property of the "VALARM" calendar
      component MUST be used as the body text of the message, and the
      "SUMMARY" property MUST be used as the subject text.  Any "ATTACH"
      properties in the "VALARM" calendar component SHOULD be sent as
      attachments to the message.

         Note: Implementations should carefully consider whether they
         accept alarm components from untrusted sources, e.g., when
         importing calendar objects from external sources.  One
         reasonable policy is to always ignore alarm components that the
         calendar user has not set herself, or at least ask for
         confirmation in such a case.

   Example:  The following example is for a "VALARM" calendar component
      that specifies an audio alarm that will sound at a precise time
      and repeat 4 more times at 15-minute intervals:

       BEGIN:VALARM
       TRIGGER;VALUE=DATE-TIME:19970317T133000Z
       REPEAT:4
       DURATION:PT15M
       ACTION:AUDIO
       ATTACH;FMTTYPE=audio/basic:ftp://example.com/pub/
        sounds/bell-01.aud
       END:VALARM

      The following example is for a "VALARM" calendar component that
      specifies a display alarm that will trigger 30 minutes before the
      scheduled start of the event or of the to-do it is associated with
      and will repeat 2 more times at 15-minute intervals:









Desruisseaux                Standards Track                    [Page 75]

RFC 5545                       iCalendar                  September 2009


       BEGIN:VALARM
       TRIGGER:-PT30M
       REPEAT:2
       DURATION:PT15M
       ACTION:DISPLAY
       DESCRIPTION:Breakfast meeting with executive\n
        team at 8:30 AM EST.
       END:VALARM

      The following example is for a "VALARM" calendar component that
      specifies an email alarm that will trigger 2 days before the
      scheduled due DATE-TIME of a to-do with which it is associated.
      It does not repeat.  The email has a subject, body, and attachment
      link.

       BEGIN:VALARM
       TRIGGER;RELATED=END:-P2D
       ACTION:EMAIL
       ATTENDEE:mailto:john_doe@example.com
       SUMMARY:*** REMINDER: SEND AGENDA FOR WEEKLY STAFF MEETING ***
       DESCRIPTION:A draft agenda needs to be sent out to the attendees
         to the weekly managers meeting (MGR-LIST). Attached is a
         pointer the document template for the agenda file.
       ATTACH;FMTTYPE=application/msword:http://example.com/
        templates/agenda.doc
       END:VALARM

3.7.  Calendar Properties

   The Calendar Properties are attributes that apply to the iCalendar
   object, as a whole.  These properties do not appear within a calendar
   component.  They SHOULD be specified after the "BEGIN:VCALENDAR"
   delimiter string and prior to any calendar component.

3.7.1.  Calendar Scale

   Property Name:  CALSCALE

   Purpose:  This property defines the calendar scale used for the
      calendar information specified in the iCalendar object.

   Value Type:  TEXT

   Property Parameters:  IANA and non-standard property parameters can
      be specified on this property.

   Conformance:  This property can be specified once in an iCalendar
      object.  The default value is "GREGORIAN".



Desruisseaux                Standards Track                    [Page 76]

RFC 5545                       iCalendar                  September 2009


   Description:  This memo is based on the Gregorian calendar scale.
      The Gregorian calendar scale is assumed if this property is not
      specified in the iCalendar object.  It is expected that other
      calendar scales will be defined in other specifications or by
      future versions of this memo.

   Format Definition:  This property is defined by the following
      notation:

       calscale   = "CALSCALE" calparam ":" calvalue CRLF

       calparam   = *(";" other-param)

       calvalue   = "GREGORIAN"

   Example:  The following is an example of this property:

       CALSCALE:GREGORIAN

3.7.2.  Method

   Property Name:  METHOD

   Purpose:  This property defines the iCalendar object method
      associated with the calendar object.

   Value Type:  TEXT

   Property Parameters:  IANA and non-standard property parameters can
      be specified on this property.

   Conformance:  This property can be specified once in an iCalendar
      object.

   Description:  When used in a MIME message entity, the value of this
      property MUST be the same as the Content-Type "method" parameter
      value.  If either the "METHOD" property or the Content-Type
      "method" parameter is specified, then the other MUST also be
      specified.

      No methods are defined by this specification.  This is the subject
      of other specifications, such as the iCalendar Transport-
      independent Interoperability Protocol (iTIP) defined by [2446bis].

      If this property is not present in the iCalendar object, then a
      scheduling transaction MUST NOT be assumed.  In such cases, the
      iCalendar object is merely being used to transport a snapshot of




Desruisseaux                Standards Track                    [Page 77]

RFC 5545                       iCalendar                  September 2009


      some calendar information; without the intention of conveying a
      scheduling semantic.

   Format Definition:  This property is defined by the following
      notation:

       method     = "METHOD" metparam ":" metvalue CRLF

       metparam   = *(";" other-param)

       metvalue   = iana-token

   Example:  The following is a hypothetical example of this property to
      convey that the iCalendar object is a scheduling request:

       METHOD:REQUEST

3.7.3.  Product Identifier

   Property Name:  PRODID

   Purpose:  This property specifies the identifier for the product that
      created the iCalendar object.

   Value Type:  TEXT

   Property Parameters:  IANA and non-standard property parameters can
      be specified on this property.

   Conformance:  The property MUST be specified once in an iCalendar
      object.

   Description:  The vendor of the implementation SHOULD assure that
      this is a globally unique identifier; using some technique such as
      an FPI value, as defined in [ISO.9070.1991].

      This property SHOULD NOT be used to alter the interpretation of an
      iCalendar object beyond the semantics specified in this memo.  For
      example, it is not to be used to further the understanding of non-
      standard properties.

   Format Definition:  This property is defined by the following
      notation:

       prodid     = "PRODID" pidparam ":" pidvalue CRLF

       pidparam   = *(";" other-param)




Desruisseaux                Standards Track                    [Page 78]

RFC 5545                       iCalendar                  September 2009


       pidvalue   = text
       ;Any text that describes the product and version
       ;and that is generally assured of being unique.

   Example:  The following is an example of this property.  It does not
      imply that English is the default language.

       PRODID:-//ABC Corporation//NONSGML My Product//EN

3.7.4.  Version

   Property Name:  VERSION

   Purpose:  This property specifies the identifier corresponding to the
      highest version number or the minimum and maximum range of the
      iCalendar specification that is required in order to interpret the
      iCalendar object.

   Value Type:  TEXT

   Property Parameters:  IANA and non-standard property parameters can
      be specified on this property.

   Conformance:  This property MUST be specified once in an iCalendar
      object.

   Description:  A value of "2.0" corresponds to this memo.

   Format Definition:  This property is defined by the following
      notation:

       version    = "VERSION" verparam ":" vervalue CRLF

       verparam   = *(";" other-param)

       vervalue   = "2.0"         ;This memo
                  / maxver
                  / (minver ";" maxver)

       minver     = <A IANA-registered iCalendar version identifier>
       ;Minimum iCalendar version needed to parse the iCalendar object.

       maxver     = <A IANA-registered iCalendar version identifier>
       ;Maximum iCalendar version needed to parse the iCalendar object.







Desruisseaux                Standards Track                    [Page 79]

RFC 5545                       iCalendar                  September 2009


   Example:  The following is an example of this property:

       VERSION:2.0

3.8.  Component Properties

   The following properties can appear within calendar components, as
   specified by each component property definition.

3.8.1.  Descriptive Component Properties

   The following properties specify descriptive information about
   calendar components.

3.8.1.1.  Attachment

   Property Name:  ATTACH

   Purpose:  This property provides the capability to associate a
      document object with a calendar component.

   Value Type:  The default value type for this property is URI.  The
      value type can also be set to BINARY to indicate inline binary
      encoded content information.

   Property Parameters:  IANA, non-standard, inline encoding, and value
      data type property parameters can be specified on this property.
      The format type parameter can be specified on this property and is
      RECOMMENDED for inline binary encoded content information.

   Conformance:  This property can be specified multiple times in a
      "VEVENT", "VTODO", "VJOURNAL", or "VALARM" calendar component with
      the exception of AUDIO alarm that only allows this property to
      occur once.

   Description:  This property is used in "VEVENT", "VTODO", and
      "VJOURNAL" calendar components to associate a resource (e.g.,
      document) with the calendar component.  This property is used in
      "VALARM" calendar components to specify an audio sound resource or
      an email message attachment.  This property can be specified as a
      URI pointing to a resource or as inline binary encoded content.

      When this property is specified as inline binary encoded content,
      calendar applications MAY attempt to guess the media type of the
      resource via inspection of its content if and only if the media
      type of the resource is not given by the "FMTTYPE" parameter.  If
      the media type remains unknown, calendar applications SHOULD treat
      it as type "application/octet-stream".



Desruisseaux                Standards Track                    [Page 80]

RFC 5545                       iCalendar                  September 2009


   Format Definition:  This property is defined by the following
      notation:

       attach     = "ATTACH" attachparam ( ":" uri ) /
                    (
                      ";" "ENCODING" "=" "BASE64"
                      ";" "VALUE" "=" "BINARY"
                      ":" binary
                    )
                    CRLF

       attachparam = *(
                   ;
                   ; The following is OPTIONAL for a URI value,
                   ; RECOMMENDED for a BINARY value,
                   ; and MUST NOT occur more than once.
                   ;
                   (";" fmttypeparam) /
                   ;
                   ; The following is OPTIONAL,
                   ; and MAY occur more than once.
                   ;
                   (";" other-param)
                   ;
                   )

   Example:  The following are examples of this property:

       ATTACH:CID:jsmith.part3.960817T083000.xyzMail@example.com

       ATTACH;FMTTYPE=application/postscript:ftp://example.com/pub/
        reports/r-960812.ps

3.8.1.2.  Categories

   Property Name:  CATEGORIES

   Purpose:  This property defines the categories for a calendar
      component.

   Value Type:  TEXT

   Property Parameters:  IANA, non-standard, and language property
      parameters can be specified on this property.

   Conformance:  The property can be specified within "VEVENT", "VTODO",
      or "VJOURNAL" calendar components.




Desruisseaux                Standards Track                    [Page 81]

RFC 5545                       iCalendar                  September 2009


   Description:  This property is used to specify categories or subtypes
      of the calendar component.  The categories are useful in searching
      for a calendar component of a particular type and category.
      Within the "VEVENT", "VTODO", or "VJOURNAL" calendar components,
      more than one category can be specified as a COMMA-separated list
      of categories.

   Format Definition:  This property is defined by the following
      notation:

       categories = "CATEGORIES" catparam ":" text *("," text)
                    CRLF

       catparam   = *(
                  ;
                  ; The following is OPTIONAL,
                  ; but MUST NOT occur more than once.
                  ;
                  (";" languageparam ) /
                  ;
                  ; The following is OPTIONAL,
                  ; and MAY occur more than once.
                  ;
                  (";" other-param)
                  ;
                  )

   Example:  The following are examples of this property:

       CATEGORIES:APPOINTMENT,EDUCATION

       CATEGORIES:MEETING

3.8.1.3.  Classification

   Property Name:  CLASS

   Purpose:  This property defines the access classification for a
      calendar component.

   Value Type:  TEXT

   Property Parameters:  IANA and non-standard property parameters can
      be specified on this property.

   Conformance:  The property can be specified once in a "VEVENT",
      "VTODO", or "VJOURNAL" calendar components.




Desruisseaux                Standards Track                    [Page 82]

RFC 5545                       iCalendar                  September 2009


   Description:  An access classification is only one component of the
      general security system within a calendar application.  It
      provides a method of capturing the scope of the access the
      calendar owner intends for information within an individual
      calendar entry.  The access classification of an individual
      iCalendar component is useful when measured along with the other
      security components of a calendar system (e.g., calendar user
      authentication, authorization, access rights, access role, etc.).
      Hence, the semantics of the individual access classifications
      cannot be completely defined by this memo alone.  Additionally,
      due to the "blind" nature of most exchange processes using this
      memo, these access classifications cannot serve as an enforcement
      statement for a system receiving an iCalendar object.  Rather,
      they provide a method for capturing the intention of the calendar
      owner for the access to the calendar component.  If not specified
      in a component that allows this property, the default value is
      PUBLIC.  Applications MUST treat x-name and iana-token values they
      don't recognize the same way as they would the PRIVATE value.

   Format Definition:  This property is defined by the following
      notation:

       class      = "CLASS" classparam ":" classvalue CRLF

       classparam = *(";" other-param)

       classvalue = "PUBLIC" / "PRIVATE" / "CONFIDENTIAL" / iana-token
                  / x-name
       ;Default is PUBLIC

   Example:  The following is an example of this property:

       CLASS:PUBLIC

3.8.1.4.  Comment

   Property Name:  COMMENT

   Purpose:  This property specifies non-processing information intended
      to provide a comment to the calendar user.

   Value Type:  TEXT

   Property Parameters:  IANA, non-standard, alternate text
      representation, and language property parameters can be specified
      on this property.





Desruisseaux                Standards Track                    [Page 83]

RFC 5545                       iCalendar                  September 2009


   Conformance:  This property can be specified multiple times in
      "VEVENT", "VTODO", "VJOURNAL", and "VFREEBUSY" calendar components
      as well as in the "STANDARD" and "DAYLIGHT" sub-components.

   Description:  This property is used to specify a comment to the
      calendar user.

   Format Definition:  This property is defined by the following
      notation:

       comment    = "COMMENT" commparam ":" text CRLF

       commparam  = *(
                  ;
                  ; The following are OPTIONAL,
                  ; but MUST NOT occur more than once.
                  ;
                  (";" altrepparam) / (";" languageparam) /
                  ;
                  ; The following is OPTIONAL,
                  ; and MAY occur more than once.
                  ;
                  (";" other-param)
                  ;
                  )

   Example:  The following is an example of this property:

       COMMENT:The meeting really needs to include both ourselves
         and the customer. We can't hold this meeting without them.
         As a matter of fact\, the venue for the meeting ought to be at
         their site. - - John

3.8.1.5.  Description

   Property Name:  DESCRIPTION

   Purpose:  This property provides a more complete description of the
      calendar component than that provided by the "SUMMARY" property.

   Value Type:  TEXT

   Property Parameters:  IANA, non-standard, alternate text
      representation, and language property parameters can be specified
      on this property.






Desruisseaux                Standards Track                    [Page 84]

RFC 5545                       iCalendar                  September 2009


   Conformance:  The property can be specified in the "VEVENT", "VTODO",
      "VJOURNAL", or "VALARM" calendar components.  The property can be
      specified multiple times only within a "VJOURNAL" calendar
      component.

   Description:  This property is used in the "VEVENT" and "VTODO" to
      capture lengthy textual descriptions associated with the activity.

      This property is used in the "VJOURNAL" calendar component to
      capture one or more textual journal entries.

      This property is used in the "VALARM" calendar component to
      capture the display text for a DISPLAY category of alarm, and to
      capture the body text for an EMAIL category of alarm.

   Format Definition:  This property is defined by the following
      notation:

       description = "DESCRIPTION" descparam ":" text CRLF

       descparam   = *(
                   ;
                   ; The following are OPTIONAL,
                   ; but MUST NOT occur more than once.
                   ;
                   (";" altrepparam) / (";" languageparam) /
                   ;
                   ; The following is OPTIONAL,
                   ; and MAY occur more than once.
                   ;
                   (";" other-param)
                   ;
                   )

   Example:  The following is an example of this property with formatted
      line breaks in the property value:

       DESCRIPTION:Meeting to provide technical review for "Phoenix"
         design.\nHappy Face Conference Room. Phoenix design team
         MUST attend this meeting.\nRSVP to team leader.

3.8.1.6.  Geographic Position

   Property Name:  GEO

   Purpose:  This property specifies information related to the global
      position for the activity specified by a calendar component.




Desruisseaux                Standards Track                    [Page 85]

RFC 5545                       iCalendar                  September 2009


   Value Type:  FLOAT.  The value MUST be two SEMICOLON-separated FLOAT
      values.

   Property Parameters:  IANA and non-standard property parameters can
      be specified on this property.

   Conformance:  This property can be specified in "VEVENT" or "VTODO"
      calendar components.

   Description:  This property value specifies latitude and longitude,
      in that order (i.e., "LAT LON" ordering).  The longitude
      represents the location east or west of the prime meridian as a
      positive or negative real number, respectively.  The longitude and
      latitude values MAY be specified up to six decimal places, which
      will allow for accuracy to within one meter of geographical
      position.  Receiving applications MUST accept values of this
      precision and MAY truncate values of greater precision.

      Values for latitude and longitude shall be expressed as decimal
      fractions of degrees.  Whole degrees of latitude shall be
      represented by a two-digit decimal number ranging from 0 through
      90.  Whole degrees of longitude shall be represented by a decimal
      number ranging from 0 through 180.  When a decimal fraction of a
      degree is specified, it shall be separated from the whole number
      of degrees by a decimal point.

      Latitudes north of the equator shall be specified by a plus sign
      (+), or by the absence of a minus sign (-), preceding the digits
      designating degrees.  Latitudes south of the Equator shall be
      designated by a minus sign (-) preceding the digits designating
      degrees.  A point on the Equator shall be assigned to the Northern
      Hemisphere.

      Longitudes east of the prime meridian shall be specified by a plus
      sign (+), or by the absence of a minus sign (-), preceding the
      digits designating degrees.  Longitudes west of the meridian shall
      be designated by minus sign (-) preceding the digits designating
      degrees.  A point on the prime meridian shall be assigned to the
      Eastern Hemisphere.  A point on the 180th meridian shall be
      assigned to the Western Hemisphere.  One exception to this last
      convention is permitted.  For the special condition of describing
      a band of latitude around the earth, the East Bounding Coordinate
      data element shall be assigned the value +180 (180) degrees.

      Any spatial address with a latitude of +90 (90) or -90 degrees
      will specify the position at the North or South Pole,
      respectively.  The component for longitude may have any legal
      value.



Desruisseaux                Standards Track                    [Page 86]

RFC 5545                       iCalendar                  September 2009


      With the exception of the special condition described above, this
      form is specified in [ANSI INCITS 61-1986].

      The simple formula for converting degrees-minutes-seconds into
      decimal degrees is:

      decimal = degrees + minutes/60 + seconds/3600.

   Format Definition:  This property is defined by the following
      notation:

       geo        = "GEO" geoparam ":" geovalue CRLF

       geoparam   = *(";" other-param)

       geovalue   = float ";" float
       ;Latitude and Longitude components

   Example:  The following is an example of this property:

       GEO:37.386013;-122.082932

3.8.1.7.  Location

   Property Name:  LOCATION

   Purpose:  This property defines the intended venue for the activity
      defined by a calendar component.

   Value Type:  TEXT

   Property Parameters:  IANA, non-standard, alternate text
      representation, and language property parameters can be specified
      on this property.

   Conformance:  This property can be specified in "VEVENT" or "VTODO"
      calendar component.

   Description:  Specific venues such as conference or meeting rooms may
      be explicitly specified using this property.  An alternate
      representation may be specified that is a URI that points to
      directory information with more structured specification of the
      location.  For example, the alternate representation may specify
      either an LDAP URL [RFC4516] pointing to an LDAP server entry or a
      CID URL [RFC2392] pointing to a MIME body part containing a
      Virtual-Information Card (vCard) [RFC2426] for the location.





Desruisseaux                Standards Track                    [Page 87]

RFC 5545                       iCalendar                  September 2009


   Format Definition:  This property is defined by the following
      notation:

       location   = "LOCATION"  locparam ":" text CRLF

       locparam   = *(
                  ;
                  ; The following are OPTIONAL,
                  ; but MUST NOT occur more than once.
                  ;
                  (";" altrepparam) / (";" languageparam) /
                  ;
                  ; The following is OPTIONAL,
                  ; and MAY occur more than once.
                  ;
                  (";" other-param)
                  ;
                  )

   Example:  The following are some examples of this property:

       LOCATION:Conference Room - F123\, Bldg. 002

       LOCATION;ALTREP="http://xyzcorp.com/conf-rooms/f123.vcf":
        Conference Room - F123\, Bldg. 002

3.8.1.8.  Percent Complete

   Property Name:  PERCENT-COMPLETE

   Purpose:  This property is used by an assignee or delegatee of a
      to-do to convey the percent completion of a to-do to the
      "Organizer".

   Value Type:  INTEGER

   Property Parameters:  IANA and non-standard property parameters can
      be specified on this property.

   Conformance:  This property can be specified once in a "VTODO"
      calendar component.

   Description:  The property value is a positive integer between 0 and
      100.  A value of "0" indicates the to-do has not yet been started.
      A value of "100" indicates that the to-do has been completed.
      Integer values in between indicate the percent partially complete.





Desruisseaux                Standards Track                    [Page 88]

RFC 5545                       iCalendar                  September 2009


      When a to-do is assigned to multiple individuals, the property
      value indicates the percent complete for that portion of the to-do
      assigned to the assignee or delegatee.  For example, if a to-do is
      assigned to both individuals "A" and "B".  A reply from "A" with a
      percent complete of "70" indicates that "A" has completed 70% of
      the to-do assigned to them.  A reply from "B" with a percent
      complete of "50" indicates "B" has completed 50% of the to-do
      assigned to them.

   Format Definition:  This property is defined by the following
      notation:

       percent = "PERCENT-COMPLETE" pctparam ":" integer CRLF

       pctparam   = *(";" other-param)

   Example:  The following is an example of this property to show 39%
      completion:

       PERCENT-COMPLETE:39

3.8.1.9.  Priority

   Property Name:  PRIORITY

   Purpose:  This property defines the relative priority for a calendar
      component.

   Value Type:  INTEGER

   Property Parameters:  IANA and non-standard property parameters can
      be specified on this property.

   Conformance:  This property can be specified in "VEVENT" and "VTODO"
      calendar components.

   Description:  This priority is specified as an integer in the range 0
      to 9.  A value of 0 specifies an undefined priority.  A value of 1
      is the highest priority.  A value of 2 is the second highest
      priority.  Subsequent numbers specify a decreasing ordinal
      priority.  A value of 9 is the lowest priority.

      A CUA with a three-level priority scheme of "HIGH", "MEDIUM", and
      "LOW" is mapped into this property such that a property value in
      the range of 1 to 4 specifies "HIGH" priority.  A value of 5 is
      the normal or "MEDIUM" priority.  A value in the range of 6 to 9
      is "LOW" priority.




Desruisseaux                Standards Track                    [Page 89]

RFC 5545                       iCalendar                  September 2009


      A CUA with a priority schema of "A1", "A2", "A3", "B1", "B2", ...,
      "C3" is mapped into this property such that a property value of 1
      specifies "A1", a property value of 2 specifies "A2", a property
      value of 3 specifies "A3", and so forth up to a property value of
      9 specifies "C3".

      Other integer values are reserved for future use.

      Within a "VEVENT" calendar component, this property specifies a
      priority for the event.  This property may be useful when more
      than one event is scheduled for a given time period.

      Within a "VTODO" calendar component, this property specified a
      priority for the to-do.  This property is useful in prioritizing
      multiple action items for a given time period.

   Format Definition:  This property is defined by the following
      notation:

       priority   = "PRIORITY" prioparam ":" priovalue CRLF
       ;Default is zero (i.e., undefined).

       prioparam  = *(";" other-param)

       priovalue   = integer       ;Must be in the range [0..9]
          ; All other values are reserved for future use.

   Example:  The following is an example of a property with the highest
      priority:

       PRIORITY:1

      The following is an example of a property with a next highest
      priority:

       PRIORITY:2

      The following is an example of a property with no priority.  This
      is equivalent to not specifying the "PRIORITY" property:

       PRIORITY:0










Desruisseaux                Standards Track                    [Page 90]

RFC 5545                       iCalendar                  September 2009


3.8.1.10.  Resources

   Property Name:  RESOURCES

   Purpose:  This property defines the equipment or resources
      anticipated for an activity specified by a calendar component.

   Value Type:  TEXT

   Property Parameters:  IANA, non-standard, alternate text
      representation, and language property parameters can be specified
      on this property.

   Conformance:  This property can be specified once in "VEVENT" or
      "VTODO" calendar component.

   Description:  The property value is an arbitrary text.  More than one
      resource can be specified as a COMMA-separated list of resources.

   Format Definition:  This property is defined by the following
      notation:

       resources  = "RESOURCES" resrcparam ":" text *("," text) CRLF

       resrcparam = *(
                  ;
                  ; The following are OPTIONAL,
                  ; but MUST NOT occur more than once.
                  ;
                  (";" altrepparam) / (";" languageparam) /
                  ;
                  ; The following is OPTIONAL,
                  ; and MAY occur more than once.
                  ;
                  (";" other-param)
                  ;
                  )

   Example:  The following is an example of this property:

       RESOURCES:EASEL,PROJECTOR,VCR

       RESOURCES;LANGUAGE=fr:Nettoyeur haute pression








Desruisseaux                Standards Track                    [Page 91]

RFC 5545                       iCalendar                  September 2009


3.8.1.11.  Status

   Property Name:  STATUS

   Purpose:  This property defines the overall status or confirmation
      for the calendar component.

   Value Type:  TEXT

   Property Parameters:  IANA and non-standard property parameters can
      be specified on this property.

   Conformance:  This property can be specified once in "VEVENT",
      "VTODO", or "VJOURNAL" calendar components.

   Description:  In a group-scheduled calendar component, the property
      is used by the "Organizer" to provide a confirmation of the event
      to the "Attendees".  For example in a "VEVENT" calendar component,
      the "Organizer" can indicate that a meeting is tentative,
      confirmed, or cancelled.  In a "VTODO" calendar component, the
      "Organizer" can indicate that an action item needs action, is
      completed, is in process or being worked on, or has been
      cancelled.  In a "VJOURNAL" calendar component, the "Organizer"
      can indicate that a journal entry is draft, final, or has been
      cancelled or removed.

   Format Definition:  This property is defined by the following
      notation:

       status          = "STATUS" statparam ":" statvalue CRLF

       statparam       = *(";" other-param)

       statvalue       = (statvalue-event
                       /  statvalue-todo
                       /  statvalue-jour)

       statvalue-event = "TENTATIVE"    ;Indicates event is tentative.
                       / "CONFIRMED"    ;Indicates event is definite.
                       / "CANCELLED"    ;Indicates event was cancelled.
       ;Status values for a "VEVENT"

       statvalue-todo  = "NEEDS-ACTION" ;Indicates to-do needs action.
                       / "COMPLETED"    ;Indicates to-do completed.
                       / "IN-PROCESS"   ;Indicates to-do in process of.
                       / "CANCELLED"    ;Indicates to-do was cancelled.
       ;Status values for "VTODO".




Desruisseaux                Standards Track                    [Page 92]

RFC 5545                       iCalendar                  September 2009


       statvalue-jour  = "DRAFT"        ;Indicates journal is draft.
                       / "FINAL"        ;Indicates journal is final.
                       / "CANCELLED"    ;Indicates journal is removed.
      ;Status values for "VJOURNAL".

   Example:  The following is an example of this property for a "VEVENT"
      calendar component:

       STATUS:TENTATIVE

      The following is an example of this property for a "VTODO"
      calendar component:

       STATUS:NEEDS-ACTION

      The following is an example of this property for a "VJOURNAL"
      calendar component:

       STATUS:DRAFT

3.8.1.12.  Summary

   Property Name:  SUMMARY

   Purpose:  This property defines a short summary or subject for the
      calendar component.

   Value Type:  TEXT

   Property Parameters:  IANA, non-standard, alternate text
      representation, and language property parameters can be specified
      on this property.

   Conformance:  The property can be specified in "VEVENT", "VTODO",
      "VJOURNAL", or "VALARM" calendar components.

   Description:  This property is used in the "VEVENT", "VTODO", and
      "VJOURNAL" calendar components to capture a short, one-line
      summary about the activity or journal entry.

      This property is used in the "VALARM" calendar component to
      capture the subject of an EMAIL category of alarm.

   Format Definition:  This property is defined by the following
      notation:






Desruisseaux                Standards Track                    [Page 93]

RFC 5545                       iCalendar                  September 2009


       summary    = "SUMMARY" summparam ":" text CRLF

       summparam  = *(
                  ;
                  ; The following are OPTIONAL,
                  ; but MUST NOT occur more than once.
                  ;
                  (";" altrepparam) / (";" languageparam) /
                  ;
                  ; The following is OPTIONAL,
                  ; and MAY occur more than once.
                  ;
                  (";" other-param)
                  ;
                  )

   Example:  The following is an example of this property:

       SUMMARY:Department Party

3.8.2.  Date and Time Component Properties

   The following properties specify date and time related information in
   calendar components.

3.8.2.1.  Date-Time Completed

   Property Name:  COMPLETED

   Purpose:  This property defines the date and time that a to-do was
      actually completed.

   Value Type:  DATE-TIME

   Property Parameters:  IANA and non-standard property parameters can
      be specified on this property.

   Conformance:  The property can be specified in a "VTODO" calendar
      component.  The value MUST be specified as a date with UTC time.

   Description:  This property defines the date and time that a to-do
      was actually completed.

   Format Definition:  This property is defined by the following
      notation:






Desruisseaux                Standards Track                    [Page 94]

RFC 5545                       iCalendar                  September 2009


       completed  = "COMPLETED" compparam ":" date-time CRLF

       compparam  = *(";" other-param)

   Example:  The following is an example of this property:

    COMPLETED:19960401T150000Z

3.8.2.2.  Date-Time End

   Property Name:  DTEND

   Purpose:  This property specifies the date and time that a calendar
      component ends.

   Value Type:  The default value type is DATE-TIME.  The value type can
      be set to a DATE value type.

   Property Parameters:  IANA, non-standard, value data type, and time
      zone identifier property parameters can be specified on this
      property.

   Conformance:  This property can be specified in "VEVENT" or
      "VFREEBUSY" calendar components.

   Description:  Within the "VEVENT" calendar component, this property
      defines the date and time by which the event ends.  The value type
      of this property MUST be the same as the "DTSTART" property, and
      its value MUST be later in time than the value of the "DTSTART"
      property.  Furthermore, this property MUST be specified as a date
      with local time if and only if the "DTSTART" property is also
      specified as a date with local time.

      Within the "VFREEBUSY" calendar component, this property defines
      the end date and time for the free or busy time information.  The
      time MUST be specified in the UTC time format.  The value MUST be
      later in time than the value of the "DTSTART" property.

   Format Definition:  This property is defined by the following
      notation:











Desruisseaux                Standards Track                    [Page 95]

RFC 5545                       iCalendar                  September 2009


       dtend      = "DTEND" dtendparam ":" dtendval CRLF

       dtendparam = *(
                  ;
                  ; The following are OPTIONAL,
                  ; but MUST NOT occur more than once.
                  ;
                  (";" "VALUE" "=" ("DATE-TIME" / "DATE")) /
                  (";" tzidparam) /
                  ;
                  ; The following is OPTIONAL,
                  ; and MAY occur more than once.
                  ;
                  (";" other-param)
                  ;
                  )

       dtendval   = date-time / date
       ;Value MUST match value type

   Example:  The following is an example of this property:

       DTEND:19960401T150000Z

       DTEND;VALUE=DATE:19980704

3.8.2.3.  Date-Time Due

   Property Name:  DUE

   Purpose:  This property defines the date and time that a to-do is
      expected to be completed.

   Value Type:  The default value type is DATE-TIME.  The value type can
      be set to a DATE value type.

   Property Parameters:  IANA, non-standard, value data type, and time
      zone identifier property parameters can be specified on this
      property.

   Conformance:  The property can be specified once in a "VTODO"
      calendar component.

   Description:  This property defines the date and time before which a
      to-do is expected to be completed.  For cases where this property
      is specified in a "VTODO" calendar component that also specifies a
      "DTSTART" property, the value type of this property MUST be the
      same as the "DTSTART" property, and the value of this property



Desruisseaux                Standards Track                    [Page 96]

RFC 5545                       iCalendar                  September 2009


      MUST be later in time than the value of the "DTSTART" property.
      Furthermore, this property MUST be specified as a date with local
      time if and only if the "DTSTART" property is also specified as a
      date with local time.

   Format Definition:  This property is defined by the following
      notation:

       due        = "DUE" dueparam ":" dueval CRLF

       dueparam   = *(
                  ;
                  ; The following are OPTIONAL,
                  ; but MUST NOT occur more than once.
                  ;
                  (";" "VALUE" "=" ("DATE-TIME" / "DATE")) /
                  (";" tzidparam) /
                  ;
                  ; The following is OPTIONAL,
                  ; and MAY occur more than once.
                  ;
                  (";" other-param)
                  ;
                  )

       dueval     = date-time / date
       ;Value MUST match value type

   Example:  The following is an example of this property:

       DUE:19980430T000000Z

3.8.2.4.  Date-Time Start

   Property Name:  DTSTART

   Purpose:  This property specifies when the calendar component begins.

   Value Type:  The default value type is DATE-TIME.  The time value
      MUST be one of the forms defined for the DATE-TIME value type.
      The value type can be set to a DATE value type.

   Property Parameters:  IANA, non-standard, value data type, and time
      zone identifier property parameters can be specified on this
      property.

   Conformance:  This property can be specified once in the "VEVENT",
      "VTODO", or "VFREEBUSY" calendar components as well as in the



Desruisseaux                Standards Track                    [Page 97]

RFC 5545                       iCalendar                  September 2009


      "STANDARD" and "DAYLIGHT" sub-components.  This property is
      REQUIRED in all types of recurring calendar components that
      specify the "RRULE" property.  This property is also REQUIRED in
      "VEVENT" calendar components contained in iCalendar objects that
      don't specify the "METHOD" property.

   Description:  Within the "VEVENT" calendar component, this property
      defines the start date and time for the event.

      Within the "VFREEBUSY" calendar component, this property defines
      the start date and time for the free or busy time information.
      The time MUST be specified in UTC time.

      Within the "STANDARD" and "DAYLIGHT" sub-components, this property
      defines the effective start date and time for a time zone
      specification.  This property is REQUIRED within each "STANDARD"
      and "DAYLIGHT" sub-components included in "VTIMEZONE" calendar
      components and MUST be specified as a date with local time without
      the "TZID" property parameter.

   Format Definition:  This property is defined by the following
      notation:

       dtstart    = "DTSTART" dtstparam ":" dtstval CRLF

       dtstparam  = *(
                  ;
                  ; The following are OPTIONAL,
                  ; but MUST NOT occur more than once.
                  ;
                  (";" "VALUE" "=" ("DATE-TIME" / "DATE")) /
                  (";" tzidparam) /
                  ;
                  ; The following is OPTIONAL,
                  ; and MAY occur more than once.
                  ;
                  (";" other-param)
                  ;
                  )

       dtstval    = date-time / date
       ;Value MUST match value type

   Example:  The following is an example of this property:

       DTSTART:19980118T073000Z





Desruisseaux                Standards Track                    [Page 98]

RFC 5545                       iCalendar                  September 2009


3.8.2.5.  Duration

   Property Name:  DURATION

   Purpose:  This property specifies a positive duration of time.

   Value Type:  DURATION

   Property Parameters:  IANA and non-standard property parameters can
      be specified on this property.

   Conformance:  This property can be specified in "VEVENT", "VTODO", or
      "VALARM" calendar components.

   Description:  In a "VEVENT" calendar component the property may be
      used to specify a duration of the event, instead of an explicit
      end DATE-TIME.  In a "VTODO" calendar component the property may
      be used to specify a duration for the to-do, instead of an
      explicit due DATE-TIME.  In a "VALARM" calendar component the
      property may be used to specify the delay period prior to
      repeating an alarm.  When the "DURATION" property relates to a
      "DTSTART" property that is specified as a DATE value, then the
      "DURATION" property MUST be specified as a "dur-day" or "dur-week"
      value.

   Format Definition:  This property is defined by the following
      notation:

       duration   = "DURATION" durparam ":" dur-value CRLF
                    ;consisting of a positive duration of time.

       durparam   = *(";" other-param)

   Example:  The following is an example of this property that specifies
      an interval of time of one hour and zero minutes and zero seconds:

       DURATION:PT1H0M0S

      The following is an example of this property that specifies an
      interval of time of 15 minutes.

       DURATION:PT15M









Desruisseaux                Standards Track                    [Page 99]

RFC 5545                       iCalendar                  September 2009


3.8.2.6.  Free/Busy Time

   Property Name:  FREEBUSY

   Purpose:  This property defines one or more free or busy time
      intervals.

   Value Type:  PERIOD

   Property Parameters:  IANA, non-standard, and free/busy time type
      property parameters can be specified on this property.

   Conformance:  The property can be specified in a "VFREEBUSY" calendar
      component.

   Description:  These time periods can be specified as either a start
      and end DATE-TIME or a start DATE-TIME and DURATION.  The date and
      time MUST be a UTC time format.

      "FREEBUSY" properties within the "VFREEBUSY" calendar component
      SHOULD be sorted in ascending order, based on start time and then
      end time, with the earliest periods first.

      The "FREEBUSY" property can specify more than one value, separated
      by the COMMA character.  In such cases, the "FREEBUSY" property
      values MUST all be of the same "FBTYPE" property parameter type
      (e.g., all values of a particular "FBTYPE" listed together in a
      single property).

   Format Definition:  This property is defined by the following
      notation:

       freebusy   = "FREEBUSY" fbparam ":" fbvalue CRLF

       fbparam    = *(
                  ;
                  ; The following is OPTIONAL,
                  ; but MUST NOT occur more than once.
                  ;
                  (";" fbtypeparam) /
                  ;
                  ; The following is OPTIONAL,
                  ; and MAY occur more than once.
                  ;
                  (";" other-param)
                  ;
                  )




Desruisseaux                Standards Track                   [Page 100]

RFC 5545                       iCalendar                  September 2009


       fbvalue    = period *("," period)
       ;Time value MUST be in the UTC time format.

   Example:  The following are some examples of this property:

       FREEBUSY;FBTYPE=BUSY-UNAVAILABLE:19970308T160000Z/PT8H30M

       FREEBUSY;FBTYPE=FREE:19970308T160000Z/PT3H,19970308T200000Z/PT1H

       FREEBUSY;FBTYPE=FREE:19970308T160000Z/PT3H,19970308T200000Z/PT1H
        ,19970308T230000Z/19970309T000000Z

3.8.2.7.  Time Transparency

   Property Name:  TRANSP

   Purpose:  This property defines whether or not an event is
      transparent to busy time searches.

   Value Type:  TEXT

   Property Parameters:  IANA and non-standard property parameters can
      be specified on this property.

   Conformance:  This property can be specified once in a "VEVENT"
      calendar component.

   Description:  Time Transparency is the characteristic of an event
      that determines whether it appears to consume time on a calendar.
      Events that consume actual time for the individual or resource
      associated with the calendar SHOULD be recorded as OPAQUE,
      allowing them to be detected by free/busy time searches.  Other
      events, which do not take up the individual's (or resource's) time
      SHOULD be recorded as TRANSPARENT, making them invisible to free/
      busy time searches.

   Format Definition:  This property is defined by the following
      notation:

       transp     = "TRANSP" transparam ":" transvalue CRLF

       transparam = *(";" other-param)

       transvalue = "OPAQUE"
                   ;Blocks or opaque on busy time searches.
                   / "TRANSPARENT"
                   ;Transparent on busy time searches.
       ;Default value is OPAQUE



Desruisseaux                Standards Track                   [Page 101]

RFC 5545                       iCalendar                  September 2009


   Example:  The following is an example of this property for an event
      that is transparent or does not block on free/busy time searches:

       TRANSP:TRANSPARENT

      The following is an example of this property for an event that is
      opaque or blocks on free/busy time searches:

       TRANSP:OPAQUE

3.8.3.  Time Zone Component Properties

   The following properties specify time zone information in calendar
   components.

3.8.3.1.  Time Zone Identifier

   Property Name:  TZID

   Purpose:  This property specifies the text value that uniquely
      identifies the "VTIMEZONE" calendar component in the scope of an
      iCalendar object.

   Value Type:  TEXT

   Property Parameters:  IANA and non-standard property parameters can
      be specified on this property.

   Conformance:  This property MUST be specified in a "VTIMEZONE"
      calendar component.

   Description:  This is the label by which a time zone calendar
      component is referenced by any iCalendar properties whose value
      type is either DATE-TIME or TIME and not intended to specify a UTC
      or a "floating" time.  The presence of the SOLIDUS character as a
      prefix, indicates that this "TZID" represents an unique ID in a
      globally defined time zone registry (when such registry is
      defined).

         Note: This document does not define a naming convention for
         time zone identifiers.  Implementers may want to use the naming
         conventions defined in existing time zone specifications such
         as the public-domain TZ database [TZDB].  The specification of
         globally unique time zone identifiers is not addressed by this
         document and is left for future study.






Desruisseaux                Standards Track                   [Page 102]

RFC 5545                       iCalendar                  September 2009


   Format Definition:  This property is defined by the following
      notation:

       tzid       = "TZID" tzidpropparam ":" [tzidprefix] text CRLF

       tzidpropparam      = *(";" other-param)

       ;tzidprefix        = "/"
       ; Defined previously. Just listed here for reader convenience.

   Example:  The following are examples of non-globally unique time zone
      identifiers:

       TZID:America/New_York

       TZID:America/Los_Angeles

      The following is an example of a fictitious globally unique time
      zone identifier:

       TZID:/example.org/America/New_York

3.8.3.2.  Time Zone Name

   Property Name:  TZNAME

   Purpose:  This property specifies the customary designation for a
      time zone description.

   Value Type:  TEXT

   Property Parameters:  IANA, non-standard, and language property
      parameters can be specified on this property.

   Conformance:  This property can be specified in "STANDARD" and
      "DAYLIGHT" sub-components.

   Description:  This property specifies a customary name that can be
      used when displaying dates that occur during the observance
      defined by the time zone sub-component.

   Format Definition:  This property is defined by the following
      notation:








Desruisseaux                Standards Track                   [Page 103]

RFC 5545                       iCalendar                  September 2009


       tzname     = "TZNAME" tznparam ":" text CRLF

       tznparam   = *(
                  ;
                  ; The following is OPTIONAL,
                  ; but MUST NOT occur more than once.
                  ;
                  (";" languageparam) /
                  ;
                  ; The following is OPTIONAL,
                  ; and MAY occur more than once.
                  ;
                  (";" other-param)
                  ;
                  )

   Example:  The following are examples of this property:

       TZNAME:EST

       TZNAME;LANGUAGE=fr-CA:HNE

3.8.3.3.  Time Zone Offset From

   Property Name:  TZOFFSETFROM

   Purpose:  This property specifies the offset that is in use prior to
      this time zone observance.

   Value Type:  UTC-OFFSET

   Property Parameters:  IANA and non-standard property parameters can
      be specified on this property.

   Conformance:  This property MUST be specified in "STANDARD" and
      "DAYLIGHT" sub-components.

   Description:  This property specifies the offset that is in use prior
      to this time observance.  It is used to calculate the absolute
      time at which the transition to a given observance takes place.
      This property MUST only be specified in a "VTIMEZONE" calendar
      component.  A "VTIMEZONE" calendar component MUST include this
      property.  The property value is a signed numeric indicating the
      number of hours and possibly minutes from UTC.  Positive numbers
      represent time zones east of the prime meridian, or ahead of UTC.
      Negative numbers represent time zones west of the prime meridian,
      or behind UTC.




Desruisseaux                Standards Track                   [Page 104]

RFC 5545                       iCalendar                  September 2009


   Format Definition:  This property is defined by the following
      notation:

       tzoffsetfrom       = "TZOFFSETFROM" frmparam ":" utc-offset
                            CRLF

       frmparam   = *(";" other-param)

   Example:  The following are examples of this property:

       TZOFFSETFROM:-0500

       TZOFFSETFROM:+1345

3.8.3.4.  Time Zone Offset To

   Property Name:  TZOFFSETTO

   Purpose:  This property specifies the offset that is in use in this
      time zone observance.

   Value Type:  UTC-OFFSET

   Property Parameters:  IANA and non-standard property parameters can
      be specified on this property.

   Conformance:  This property MUST be specified in "STANDARD" and
      "DAYLIGHT" sub-components.

   Description:  This property specifies the offset that is in use in
      this time zone observance.  It is used to calculate the absolute
      time for the new observance.  The property value is a signed
      numeric indicating the number of hours and possibly minutes from
      UTC.  Positive numbers represent time zones east of the prime
      meridian, or ahead of UTC.  Negative numbers represent time zones
      west of the prime meridian, or behind UTC.

   Format Definition:  This property is defined by the following
      notation:

       tzoffsetto = "TZOFFSETTO" toparam ":" utc-offset CRLF

       toparam    = *(";" other-param)








Desruisseaux                Standards Track                   [Page 105]

RFC 5545                       iCalendar                  September 2009


   Example:  The following are examples of this property:

       TZOFFSETTO:-0400

       TZOFFSETTO:+1245

3.8.3.5.  Time Zone URL

   Property Name:  TZURL

   Purpose:  This property provides a means for a "VTIMEZONE" component
      to point to a network location that can be used to retrieve an up-
      to-date version of itself.

   Value Type:  URI

   Property Parameters:  IANA and non-standard property parameters can
      be specified on this property.

   Conformance:  This property can be specified in a "VTIMEZONE"
      calendar component.

   Description:  This property provides a means for a "VTIMEZONE"
      component to point to a network location that can be used to
      retrieve an up-to-date version of itself.  This provides a hook to
      handle changes government bodies impose upon time zone
      definitions.  Retrieval of this resource results in an iCalendar
      object containing a single "VTIMEZONE" component and a "METHOD"
      property set to PUBLISH.

   Format Definition:  This property is defined by the following
      notation:

       tzurl      = "TZURL" tzurlparam ":" uri CRLF

       tzurlparam = *(";" other-param)

   Example:  The following is an example of this property:

    TZURL:http://timezones.example.org/tz/America-Los_Angeles.ics

3.8.4.  Relationship Component Properties

   The following properties specify relationship information in calendar
   components.






Desruisseaux                Standards Track                   [Page 106]

RFC 5545                       iCalendar                  September 2009


3.8.4.1.  Attendee

   Property Name:  ATTENDEE

   Purpose:  This property defines an "Attendee" within a calendar
      component.

   Value Type:  CAL-ADDRESS

   Property Parameters:  IANA, non-standard, language, calendar user
      type, group or list membership, participation role, participation
      status, RSVP expectation, delegatee, delegator, sent by, common
      name, or directory entry reference property parameters can be
      specified on this property.

   Conformance:  This property MUST be specified in an iCalendar object
      that specifies a group-scheduled calendar entity.  This property
      MUST NOT be specified in an iCalendar object when publishing the
      calendar information (e.g., NOT in an iCalendar object that
      specifies the publication of a calendar user's busy time, event,
      to-do, or journal).  This property is not specified in an
      iCalendar object that specifies only a time zone definition or
      that defines calendar components that are not group-scheduled
      components, but are components only on a single user's calendar.

   Description:  This property MUST only be specified within calendar
      components to specify participants, non-participants, and the
      chair of a group-scheduled calendar entity.  The property is
      specified within an "EMAIL" category of the "VALARM" calendar
      component to specify an email address that is to receive the email
      type of iCalendar alarm.

      The property parameter "CN" is for the common or displayable name
      associated with the calendar address; "ROLE", for the intended
      role that the attendee will have in the calendar component;
      "PARTSTAT", for the status of the attendee's participation;
      "RSVP", for indicating whether the favor of a reply is requested;
      "CUTYPE", to indicate the type of calendar user; "MEMBER", to
      indicate the groups that the attendee belongs to; "DELEGATED-TO",
      to indicate the calendar users that the original request was
      delegated to; and "DELEGATED-FROM", to indicate whom the request
      was delegated from; "SENT-BY", to indicate whom is acting on
      behalf of the "ATTENDEE"; and "DIR", to indicate the URI that
      points to the directory information corresponding to the attendee.
      These property parameters can be specified on an "ATTENDEE"
      property in either a "VEVENT", "VTODO", or "VJOURNAL" calendar
      component.  They MUST NOT be specified in an "ATTENDEE" property
      in a "VFREEBUSY" or "VALARM" calendar component.  If the



Desruisseaux                Standards Track                   [Page 107]

RFC 5545                       iCalendar                  September 2009


      "LANGUAGE" property parameter is specified, the identified
      language applies to the "CN" parameter.

      A recipient delegated a request MUST inherit the "RSVP" and "ROLE"
      values from the attendee that delegated the request to them.

      Multiple attendees can be specified by including multiple
      "ATTENDEE" properties within the calendar component.

   Format Definition:  This property is defined by the following
      notation:

       attendee   = "ATTENDEE" attparam ":" cal-address CRLF

       attparam   = *(
                  ;
                  ; The following are OPTIONAL,
                  ; but MUST NOT occur more than once.
                  ;
                  (";" cutypeparam) / (";" memberparam) /
                  (";" roleparam) / (";" partstatparam) /
                  (";" rsvpparam) / (";" deltoparam) /
                  (";" delfromparam) / (";" sentbyparam) /
                  (";" cnparam) / (";" dirparam) /
                  (";" languageparam) /
                  ;
                  ; The following is OPTIONAL,
                  ; and MAY occur more than once.
                  ;
                  (";" other-param)
                  ;
                  )

   Example:  The following are examples of this property's use for a
      to-do:

       ATTENDEE;MEMBER="mailto:DEV-GROUP@example.com":
        mailto:joecool@example.com
       ATTENDEE;DELEGATED-FROM="mailto:immud@example.com":
        mailto:ildoit@example.com











Desruisseaux                Standards Track                   [Page 108]

RFC 5545                       iCalendar                  September 2009


      The following is an example of this property used for specifying
      multiple attendees to an event:

       ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=TENTATIVE;CN=Henry
        Cabot:mailto:hcabot@example.com
       ATTENDEE;ROLE=REQ-PARTICIPANT;DELEGATED-FROM="mailto:bob@
        example.com";PARTSTAT=ACCEPTED;CN=Jane Doe:mailto:jdoe@
        example.com

      The following is an example of this property with a URI to the
      directory information associated with the attendee:

       ATTENDEE;CN=John Smith;DIR="ldap://example.com:6666/o=ABC%
        20Industries,c=US???(cn=Jim%20Dolittle)":mailto:jimdo@
        example.com

      The following is an example of this property with "delegatee" and
      "delegator" information for an event:

       ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=TENTATIVE;DELEGATED-FROM=
        "mailto:iamboss@example.com";CN=Henry Cabot:mailto:hcabot@
        example.com
       ATTENDEE;ROLE=NON-PARTICIPANT;PARTSTAT=DELEGATED;DELEGATED-TO=
        "mailto:hcabot@example.com";CN=The Big Cheese:mailto:iamboss
        @example.com
       ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=ACCEPTED;CN=Jane Doe
        :mailto:jdoe@example.com

   Example:  The following is an example of this property's use when
      another calendar user is acting on behalf of the "Attendee":

       ATTENDEE;SENT-BY=mailto:jan_doe@example.com;CN=John Smith:
        mailto:jsmith@example.com

3.8.4.2.  Contact

   Property Name:  CONTACT

   Purpose:  This property is used to represent contact information or
      alternately a reference to contact information associated with the
      calendar component.

   Value Type:  TEXT

   Property Parameters:  IANA, non-standard, alternate text
      representation, and language property parameters can be specified
      on this property.




Desruisseaux                Standards Track                   [Page 109]

RFC 5545                       iCalendar                  September 2009


   Conformance:  This property can be specified in a "VEVENT", "VTODO",
      "VJOURNAL", or "VFREEBUSY" calendar component.

   Description:  The property value consists of textual contact
      information.  An alternative representation for the property value
      can also be specified that refers to a URI pointing to an
      alternate form, such as a vCard [RFC2426], for the contact
      information.

   Format Definition:  This property is defined by the following
      notation:

       contact    = "CONTACT" contparam ":" text CRLF

       contparam  = *(
                  ;
                  ; The following are OPTIONAL,
                  ; but MUST NOT occur more than once.
                  ;
                  (";" altrepparam) / (";" languageparam) /
                  ;
                  ; The following is OPTIONAL,
                  ; and MAY occur more than once.
                  ;
                  (";" other-param)
                  ;
                  )

   Example:  The following is an example of this property referencing
      textual contact information:

       CONTACT:Jim Dolittle\, ABC Industries\, +1-919-555-1234

      The following is an example of this property with an alternate
      representation of an LDAP URI to a directory entry containing the
      contact information:

       CONTACT;ALTREP="ldap://example.com:6666/o=ABC%20Industries\,
        c=US???(cn=Jim%20Dolittle)":Jim Dolittle\, ABC Industries\,
        +1-919-555-1234

      The following is an example of this property with an alternate
      representation of a MIME body part containing the contact
      information, such as a vCard [RFC2426] embedded in a text/
      directory media type [RFC2425]:

       CONTACT;ALTREP="CID:part3.msg970930T083000SILVER@example.com":
        Jim Dolittle\, ABC Industries\, +1-919-555-1234



Desruisseaux                Standards Track                   [Page 110]

RFC 5545                       iCalendar                  September 2009


      The following is an example of this property referencing a network
      resource, such as a vCard [RFC2426] object containing the contact
      information:

       CONTACT;ALTREP="http://example.com/pdi/jdoe.vcf":Jim
         Dolittle\, ABC Industries\, +1-919-555-1234

3.8.4.3.  Organizer

   Property Name:  ORGANIZER

   Purpose:  This property defines the organizer for a calendar
      component.

   Value Type:  CAL-ADDRESS

   Property Parameters:  IANA, non-standard, language, common name,
      directory entry reference, and sent-by property parameters can be
      specified on this property.

   Conformance:  This property MUST be specified in an iCalendar object
      that specifies a group-scheduled calendar entity.  This property
      MUST be specified in an iCalendar object that specifies the
      publication of a calendar user's busy time.  This property MUST
      NOT be specified in an iCalendar object that specifies only a time
      zone definition or that defines calendar components that are not
      group-scheduled components, but are components only on a single
      user's calendar.

   Description:  This property is specified within the "VEVENT",
      "VTODO", and "VJOURNAL" calendar components to specify the
      organizer of a group-scheduled calendar entity.  The property is
      specified within the "VFREEBUSY" calendar component to specify the
      calendar user requesting the free or busy time.  When publishing a
      "VFREEBUSY" calendar component, the property is used to specify
      the calendar that the published busy time came from.

      The property has the property parameters "CN", for specifying the
      common or display name associated with the "Organizer", "DIR", for
      specifying a pointer to the directory information associated with
      the "Organizer", "SENT-BY", for specifying another calendar user
      that is acting on behalf of the "Organizer".  The non-standard
      parameters may also be specified on this property.  If the
      "LANGUAGE" property parameter is specified, the identified
      language applies to the "CN" parameter value.






Desruisseaux                Standards Track                   [Page 111]

RFC 5545                       iCalendar                  September 2009


   Format Definition:  This property is defined by the following
      notation:

       organizer  = "ORGANIZER" orgparam ":"
                    cal-address CRLF

       orgparam   = *(
                  ;
                  ; The following are OPTIONAL,
                  ; but MUST NOT occur more than once.
                  ;
                  (";" cnparam) / (";" dirparam) / (";" sentbyparam) /
                  (";" languageparam) /
                  ;
                  ; The following is OPTIONAL,
                  ; and MAY occur more than once.
                  ;
                  (";" other-param)
                  ;
                  )

   Example:  The following is an example of this property:

       ORGANIZER;CN=John Smith:mailto:jsmith@example.com

      The following is an example of this property with a pointer to the
      directory information associated with the organizer:

       ORGANIZER;CN=JohnSmith;DIR="ldap://example.com:6666/o=DC%20Ass
        ociates,c=US???(cn=John%20Smith)":mailto:jsmith@example.com

      The following is an example of this property used by another
      calendar user who is acting on behalf of the organizer, with
      responses intended to be sent back to the organizer, not the other
      calendar user:

       ORGANIZER;SENT-BY="mailto:jane_doe@example.com":
        mailto:jsmith@example.com

3.8.4.4.  Recurrence ID

   Property Name:  RECURRENCE-ID

   Purpose:  This property is used in conjunction with the "UID" and
      "SEQUENCE" properties to identify a specific instance of a
      recurring "VEVENT", "VTODO", or "VJOURNAL" calendar component.
      The property value is the original value of the "DTSTART" property
      of the recurrence instance.



Desruisseaux                Standards Track                   [Page 112]

RFC 5545                       iCalendar                  September 2009


   Value Type:  The default value type is DATE-TIME.  The value type can
      be set to a DATE value type.  This property MUST have the same
      value type as the "DTSTART" property contained within the
      recurring component.  Furthermore, this property MUST be specified
      as a date with local time if and only if the "DTSTART" property
      contained within the recurring component is specified as a date
      with local time.

   Property Parameters:  IANA, non-standard, value data type, time zone
      identifier, and recurrence identifier range parameters can be
      specified on this property.

   Conformance:  This property can be specified in an iCalendar object
      containing a recurring calendar component.

   Description:  The full range of calendar components specified by a
      recurrence set is referenced by referring to just the "UID"
      property value corresponding to the calendar component.  The
      "RECURRENCE-ID" property allows the reference to an individual
      instance within the recurrence set.

      If the value of the "DTSTART" property is a DATE type value, then
      the value MUST be the calendar date for the recurrence instance.

      The DATE-TIME value is set to the time when the original
      recurrence instance would occur; meaning that if the intent is to
      change a Friday meeting to Thursday, the DATE-TIME is still set to
      the original Friday meeting.

      The "RECURRENCE-ID" property is used in conjunction with the "UID"
      and "SEQUENCE" properties to identify a particular instance of a
      recurring event, to-do, or journal.  For a given pair of "UID" and
      "SEQUENCE" property values, the "RECURRENCE-ID" value for a
      recurrence instance is fixed.

      The "RANGE" parameter is used to specify the effective range of
      recurrence instances from the instance specified by the
      "RECURRENCE-ID" property value.  The value for the range parameter
      can only be "THISANDFUTURE" to indicate a range defined by the
      given recurrence instance and all subsequent instances.
      Subsequent instances are determined by their "RECURRENCE-ID" value
      and not their current scheduled start time.  Subsequent instances
      defined in separate components are not impacted by the given
      recurrence instance.  When the given recurrence instance is
      rescheduled, all subsequent instances are also rescheduled by the
      same time difference.  For instance, if the given recurrence
      instance is rescheduled to start 2 hours later, then all
      subsequent instances are also rescheduled 2 hours later.



Desruisseaux                Standards Track                   [Page 113]

RFC 5545                       iCalendar                  September 2009


      Similarly, if the duration of the given recurrence instance is
      modified, then all subsequence instances are also modified to have
      this same duration.

         Note: The "RANGE" parameter may not be appropriate to
         reschedule specific subsequent instances of complex recurring
         calendar component.  Assuming an unbounded recurring calendar
         component scheduled to occur on Mondays and Wednesdays, the
         "RANGE" parameter could not be used to reschedule only the
         future Monday instances to occur on Tuesday instead.  In such
         cases, the calendar application could simply truncate the
         unbounded recurring calendar component (i.e., with the "COUNT"
         or "UNTIL" rule parts), and create two new unbounded recurring
         calendar components for the future instances.

   Format Definition:  This property is defined by the following
      notation:

       recurid    = "RECURRENCE-ID" ridparam ":" ridval CRLF

       ridparam   = *(
                  ;
                  ; The following are OPTIONAL,
                  ; but MUST NOT occur more than once.
                  ;
                  (";" "VALUE" "=" ("DATE-TIME" / "DATE")) /
                  (";" tzidparam) / (";" rangeparam) /
                  ;
                  ; The following is OPTIONAL,
                  ; and MAY occur more than once.
                  ;
                  (";" other-param)
                  ;
                  )

       ridval     = date-time / date
       ;Value MUST match value type

   Example:  The following are examples of this property:

       RECURRENCE-ID;VALUE=DATE:19960401

       RECURRENCE-ID;RANGE=THISANDFUTURE:19960120T120000Z








Desruisseaux                Standards Track                   [Page 114]

RFC 5545                       iCalendar                  September 2009


3.8.4.5.  Related To

   Property Name:  RELATED-TO

   Purpose:  This property is used to represent a relationship or
      reference between one calendar component and another.

   Value Type:  TEXT

   Property Parameters:  IANA, non-standard, and relationship type
      property parameters can be specified on this property.

   Conformance:  This property can be specified in the "VEVENT",
      "VTODO", and "VJOURNAL" calendar components.

   Description:  The property value consists of the persistent, globally
      unique identifier of another calendar component.  This value would
      be represented in a calendar component by the "UID" property.

      By default, the property value points to another calendar
      component that has a PARENT relationship to the referencing
      object.  The "RELTYPE" property parameter is used to either
      explicitly state the default PARENT relationship type to the
      referenced calendar component or to override the default PARENT
      relationship type and specify either a CHILD or SIBLING
      relationship.  The PARENT relationship indicates that the calendar
      component is a subordinate of the referenced calendar component.
      The CHILD relationship indicates that the calendar component is a
      superior of the referenced calendar component.  The SIBLING
      relationship indicates that the calendar component is a peer of
      the referenced calendar component.

      Changes to a calendar component referenced by this property can
      have an implicit impact on the related calendar component.  For
      example, if a group event changes its start or end date or time,
      then the related, dependent events will need to have their start
      and end dates changed in a corresponding way.  Similarly, if a
      PARENT calendar component is cancelled or deleted, then there is
      an implied impact to the related CHILD calendar components.  This
      property is intended only to provide information on the
      relationship of calendar components.  It is up to the target
      calendar system to maintain any property implications of this
      relationship.








Desruisseaux                Standards Track                   [Page 115]

RFC 5545                       iCalendar                  September 2009


   Format Definition:  This property is defined by the following
      notation:

       related    = "RELATED-TO" relparam ":" text CRLF

       relparam   = *(
                  ;
                  ; The following is OPTIONAL,
                  ; but MUST NOT occur more than once.
                  ;
                  (";" reltypeparam) /
                  ;
                  ; The following is OPTIONAL,
                  ; and MAY occur more than once.
                  ;
                  (";" other-param)
                  ;
                  )

      The following is an example of this property:

       RELATED-TO:jsmith.part7.19960817T083000.xyzMail@example.com

       RELATED-TO:19960401-080045-4000F192713-0052@example.com

3.8.4.6.  Uniform Resource Locator

   Property Name:  URL

   Purpose:  This property defines a Uniform Resource Locator (URL)
      associated with the iCalendar object.

   Value Type:  URI

   Property Parameters:  IANA and non-standard property parameters can
      be specified on this property.

   Conformance:  This property can be specified once in the "VEVENT",
      "VTODO", "VJOURNAL", or "VFREEBUSY" calendar components.

   Description:  This property may be used in a calendar component to
      convey a location where a more dynamic rendition of the calendar
      information associated with the calendar component can be found.
      This memo does not attempt to standardize the form of the URI, nor
      the format of the resource pointed to by the property value.  If
      the URL property and Content-Location MIME header are both
      specified, they MUST point to the same resource.




Desruisseaux                Standards Track                   [Page 116]

RFC 5545                       iCalendar                  September 2009


   Format Definition:  This property is defined by the following
      notation:

       url        = "URL" urlparam ":" uri CRLF

       urlparam   = *(";" other-param)

   Example:  The following is an example of this property:

       URL:http://example.com/pub/calendars/jsmith/mytime.ics

3.8.4.7.  Unique Identifier

   Property Name:  UID

   Purpose:  This property defines the persistent, globally unique
      identifier for the calendar component.

   Value Type:  TEXT

   Property Parameters:  IANA and non-standard property parameters can
      be specified on this property.

   Conformance:  The property MUST be specified in the "VEVENT",
      "VTODO", "VJOURNAL", or "VFREEBUSY" calendar components.

   Description:  The "UID" itself MUST be a globally unique identifier.
      The generator of the identifier MUST guarantee that the identifier
      is unique.  There are several algorithms that can be used to
      accomplish this.  A good method to assure uniqueness is to put the
      domain name or a domain literal IP address of the host on which
      the identifier was created on the right-hand side of an "@", and
      on the left-hand side, put a combination of the current calendar
      date and time of day (i.e., formatted in as a DATE-TIME value)
      along with some other currently unique (perhaps sequential)
      identifier available on the system (for example, a process id
      number).  Using a DATE-TIME value on the left-hand side and a
      domain name or domain literal on the right-hand side makes it
      possible to guarantee uniqueness since no two hosts should be
      using the same domain name or IP address at the same time.  Though
      other algorithms will work, it is RECOMMENDED that the right-hand
      side contain some domain identifier (either of the host itself or
      otherwise) such that the generator of the message identifier can
      guarantee the uniqueness of the left-hand side within the scope of
      that domain.

      This is the method for correlating scheduling messages with the
      referenced "VEVENT", "VTODO", or "VJOURNAL" calendar component.



Desruisseaux                Standards Track                   [Page 117]

RFC 5545                       iCalendar                  September 2009


      The full range of calendar components specified by a recurrence
      set is referenced by referring to just the "UID" property value
      corresponding to the calendar component.  The "RECURRENCE-ID"
      property allows the reference to an individual instance within the
      recurrence set.

      This property is an important method for group-scheduling
      applications to match requests with later replies, modifications,
      or deletion requests.  Calendaring and scheduling applications
      MUST generate this property in "VEVENT", "VTODO", and "VJOURNAL"
      calendar components to assure interoperability with other group-
      scheduling applications.  This identifier is created by the
      calendar system that generates an iCalendar object.

      Implementations MUST be able to receive and persist values of at
      least 255 octets for this property, but they MUST NOT truncate
      values in the middle of a UTF-8 multi-octet sequence.

   Format Definition:  This property is defined by the following
      notation:

       uid        = "UID" uidparam ":" text CRLF

       uidparam   = *(";" other-param)

   Example:  The following is an example of this property:

       UID:19960401T080045Z-4000F192713-0052@example.com

3.8.5.  Recurrence Component Properties

   The following properties specify recurrence information in calendar
   components.

3.8.5.1.  Exception Date-Times

   Property Name:  EXDATE

   Purpose:  This property defines the list of DATE-TIME exceptions for
      recurring events, to-dos, journal entries, or time zone
      definitions.

   Value Type:  The default value type for this property is DATE-TIME.
      The value type can be set to DATE.

   Property Parameters:  IANA, non-standard, value data type, and time
      zone identifier property parameters can be specified on this
      property.



Desruisseaux                Standards Track                   [Page 118]

RFC 5545                       iCalendar                  September 2009


   Conformance:  This property can be specified in recurring "VEVENT",
      "VTODO", and "VJOURNAL" calendar components as well as in the
      "STANDARD" and "DAYLIGHT" sub-components of the "VTIMEZONE"
      calendar component.

   Description:  The exception dates, if specified, are used in
      computing the recurrence set.  The recurrence set is the complete
      set of recurrence instances for a calendar component.  The
      recurrence set is generated by considering the initial "DTSTART"
      property along with the "RRULE", "RDATE", and "EXDATE" properties
      contained within the recurring component.  The "DTSTART" property
      defines the first instance in the recurrence set.  The "DTSTART"
      property value SHOULD match the pattern of the recurrence rule, if
      specified.  The recurrence set generated with a "DTSTART" property
      value that doesn't match the pattern of the rule is undefined.
      The final recurrence set is generated by gathering all of the
      start DATE-TIME values generated by any of the specified "RRULE"
      and "RDATE" properties, and then excluding any start DATE-TIME
      values specified by "EXDATE" properties.  This implies that start
      DATE-TIME values specified by "EXDATE" properties take precedence
      over those specified by inclusion properties (i.e., "RDATE" and
      "RRULE").  When duplicate instances are generated by the "RRULE"
      and "RDATE" properties, only one recurrence is considered.
      Duplicate instances are ignored.

      The "EXDATE" property can be used to exclude the value specified
      in "DTSTART".  However, in such cases, the original "DTSTART" date
      MUST still be maintained by the calendaring and scheduling system
      because the original "DTSTART" value has inherent usage
      dependencies by other properties such as the "RECURRENCE-ID".

   Format Definition:  This property is defined by the following
      notation:


















Desruisseaux                Standards Track                   [Page 119]

RFC 5545                       iCalendar                  September 2009


       exdate     = "EXDATE" exdtparam ":" exdtval *("," exdtval) CRLF

       exdtparam  = *(
                  ;
                  ; The following are OPTIONAL,
                  ; but MUST NOT occur more than once.
                  ;
                  (";" "VALUE" "=" ("DATE-TIME" / "DATE")) /
                  ;
                  (";" tzidparam) /
                  ;
                  ; The following is OPTIONAL,
                  ; and MAY occur more than once.
                  ;
                  (";" other-param)
                  ;
                  )

       exdtval    = date-time / date
       ;Value MUST match value type

   Example:  The following is an example of this property:

       EXDATE:19960402T010000Z,19960403T010000Z,19960404T010000Z

3.8.5.2.  Recurrence Date-Times

   Property Name:  RDATE

   Purpose:  This property defines the list of DATE-TIME values for
      recurring events, to-dos, journal entries, or time zone
      definitions.

   Value Type:  The default value type for this property is DATE-TIME.
      The value type can be set to DATE or PERIOD.

   Property Parameters:  IANA, non-standard, value data type, and time
      zone identifier property parameters can be specified on this
      property.

   Conformance:  This property can be specified in recurring "VEVENT",
      "VTODO", and "VJOURNAL" calendar components as well as in the
      "STANDARD" and "DAYLIGHT" sub-components of the "VTIMEZONE"
      calendar component.

   Description:  This property can appear along with the "RRULE"
      property to define an aggregate set of repeating occurrences.
      When they both appear in a recurring component, the recurrence



Desruisseaux                Standards Track                   [Page 120]

RFC 5545                       iCalendar                  September 2009


      instances are defined by the union of occurrences defined by both
      the "RDATE" and "RRULE".

      The recurrence dates, if specified, are used in computing the
      recurrence set.  The recurrence set is the complete set of
      recurrence instances for a calendar component.  The recurrence set
      is generated by considering the initial "DTSTART" property along
      with the "RRULE", "RDATE", and "EXDATE" properties contained
      within the recurring component.  The "DTSTART" property defines
      the first instance in the recurrence set.  The "DTSTART" property
      value SHOULD match the pattern of the recurrence rule, if
      specified.  The recurrence set generated with a "DTSTART" property
      value that doesn't match the pattern of the rule is undefined.
      The final recurrence set is generated by gathering all of the
      start DATE-TIME values generated by any of the specified "RRULE"
      and "RDATE" properties, and then excluding any start DATE-TIME
      values specified by "EXDATE" properties.  This implies that start
      DATE-TIME values specified by "EXDATE" properties take precedence
      over those specified by inclusion properties (i.e., "RDATE" and
      "RRULE").  Where duplicate instances are generated by the "RRULE"
      and "RDATE" properties, only one recurrence is considered.
      Duplicate instances are ignored.

   Format Definition:  This property is defined by the following
      notation:

       rdate      = "RDATE" rdtparam ":" rdtval *("," rdtval) CRLF

       rdtparam   = *(
                  ;
                  ; The following are OPTIONAL,
                  ; but MUST NOT occur more than once.
                  ;
                  (";" "VALUE" "=" ("DATE-TIME" / "DATE" / "PERIOD")) /
                  (";" tzidparam) /
                  ;
                  ; The following is OPTIONAL,
                  ; and MAY occur more than once.
                  ;
                  (";" other-param)
                  ;
                  )

       rdtval     = date-time / date / period
       ;Value MUST match value type






Desruisseaux                Standards Track                   [Page 121]

RFC 5545                       iCalendar                  September 2009


   Example:  The following are examples of this property:

       RDATE:19970714T123000Z
       RDATE;TZID=America/New_York:19970714T083000

       RDATE;VALUE=PERIOD:19960403T020000Z/19960403T040000Z,
        19960404T010000Z/PT3H

       RDATE;VALUE=DATE:19970101,19970120,19970217,19970421
        19970526,19970704,19970901,19971014,19971128,19971129,19971225

3.8.5.3.  Recurrence Rule

   Property Name:  RRULE

   Purpose:  This property defines a rule or repeating pattern for
      recurring events, to-dos, journal entries, or time zone
      definitions.

   Value Type:  RECUR

   Property Parameters:  IANA and non-standard property parameters can
      be specified on this property.

   Conformance:  This property can be specified in recurring "VEVENT",
      "VTODO", and "VJOURNAL" calendar components as well as in the
      "STANDARD" and "DAYLIGHT" sub-components of the "VTIMEZONE"
      calendar component, but it SHOULD NOT be specified more than once.
      The recurrence set generated with multiple "RRULE" properties is
      undefined.

   Description:  The recurrence rule, if specified, is used in computing
      the recurrence set.  The recurrence set is the complete set of
      recurrence instances for a calendar component.  The recurrence set
      is generated by considering the initial "DTSTART" property along
      with the "RRULE", "RDATE", and "EXDATE" properties contained
      within the recurring component.  The "DTSTART" property defines
      the first instance in the recurrence set.  The "DTSTART" property
      value SHOULD be synchronized with the recurrence rule, if
      specified.  The recurrence set generated with a "DTSTART" property
      value not synchronized with the recurrence rule is undefined.  The
      final recurrence set is generated by gathering all of the start
      DATE-TIME values generated by any of the specified "RRULE" and
      "RDATE" properties, and then excluding any start DATE-TIME values
      specified by "EXDATE" properties.  This implies that start DATE-
      TIME values specified by "EXDATE" properties take precedence over
      those specified by inclusion properties (i.e., "RDATE" and
      "RRULE").  Where duplicate instances are generated by the "RRULE"



Desruisseaux                Standards Track                   [Page 122]

RFC 5545                       iCalendar                  September 2009


      and "RDATE" properties, only one recurrence is considered.
      Duplicate instances are ignored.

      The "DTSTART" property specified within the iCalendar object
      defines the first instance of the recurrence.  In most cases, a
      "DTSTART" property of DATE-TIME value type used with a recurrence
      rule, should be specified as a date with local time and time zone
      reference to make sure all the recurrence instances start at the
      same local time regardless of time zone changes.

      If the duration of the recurring component is specified with the
      "DTEND" or "DUE" property, then the same exact duration will apply
      to all the members of the generated recurrence set.  Else, if the
      duration of the recurring component is specified with the
      "DURATION" property, then the same nominal duration will apply to
      all the members of the generated recurrence set and the exact
      duration of each recurrence instance will depend on its specific
      start time.  For example, recurrence instances of a nominal
      duration of one day will have an exact duration of more or less
      than 24 hours on a day where a time zone shift occurs.  The
      duration of a specific recurrence may be modified in an exception
      component or simply by using an "RDATE" property of PERIOD value
      type.

   Format Definition:  This property is defined by the following
      notation:

       rrule      = "RRULE" rrulparam ":" recur CRLF

       rrulparam  = *(";" other-param)

   Example:  All examples assume the Eastern United States time zone.

      Daily for 10 occurrences:

       DTSTART;TZID=America/New_York:19970902T090000
       RRULE:FREQ=DAILY;COUNT=10

       ==> (1997 9:00 AM EDT) September 2-11

      Daily until December 24, 1997:

       DTSTART;TZID=America/New_York:19970902T090000
       RRULE:FREQ=DAILY;UNTIL=19971224T000000Z

       ==> (1997 9:00 AM EDT) September 2-30;October 1-25
           (1997 9:00 AM EST) October 26-31;November 1-30;December 1-23




Desruisseaux                Standards Track                   [Page 123]

RFC 5545                       iCalendar                  September 2009


      Every other day - forever:

       DTSTART;TZID=America/New_York:19970902T090000
       RRULE:FREQ=DAILY;INTERVAL=2

       ==> (1997 9:00 AM EDT) September 2,4,6,8...24,26,28,30;
                              October 2,4,6...20,22,24
           (1997 9:00 AM EST) October 26,28,30;
                              November 1,3,5,7...25,27,29;
                              December 1,3,...

      Every 10 days, 5 occurrences:

       DTSTART;TZID=America/New_York:19970902T090000
       RRULE:FREQ=DAILY;INTERVAL=10;COUNT=5

       ==> (1997 9:00 AM EDT) September 2,12,22;
                              October 2,12

      Every day in January, for 3 years:

       DTSTART;TZID=America/New_York:19980101T090000

       RRULE:FREQ=YEARLY;UNTIL=20000131T140000Z;
        BYMONTH=1;BYDAY=SU,MO,TU,WE,TH,FR,SA
       or
       RRULE:FREQ=DAILY;UNTIL=20000131T140000Z;BYMONTH=1

       ==> (1998 9:00 AM EST)January 1-31
           (1999 9:00 AM EST)January 1-31
           (2000 9:00 AM EST)January 1-31

      Weekly for 10 occurrences:

       DTSTART;TZID=America/New_York:19970902T090000
       RRULE:FREQ=WEEKLY;COUNT=10

       ==> (1997 9:00 AM EDT) September 2,9,16,23,30;October 7,14,21
           (1997 9:00 AM EST) October 28;November 4












Desruisseaux                Standards Track                   [Page 124]

RFC 5545                       iCalendar                  September 2009


      Weekly until December 24, 1997:

       DTSTART;TZID=America/New_York:19970902T090000
       RRULE:FREQ=WEEKLY;UNTIL=19971224T000000Z

       ==> (1997 9:00 AM EDT) September 2,9,16,23,30;
                              October 7,14,21
           (1997 9:00 AM EST) October 28;
                              November 4,11,18,25;
                              December 2,9,16,23

      Every other week - forever:

       DTSTART;TZID=America/New_York:19970902T090000
       RRULE:FREQ=WEEKLY;INTERVAL=2;WKST=SU

       ==> (1997 9:00 AM EDT) September 2,16,30;
                              October 14
           (1997 9:00 AM EST) October 28;
                              November 11,25;
                              December 9,23
           (1998 9:00 AM EST) January 6,20;
                              February 3, 17
           ...

      Weekly on Tuesday and Thursday for five weeks:

       DTSTART;TZID=America/New_York:19970902T090000
       RRULE:FREQ=WEEKLY;UNTIL=19971007T000000Z;WKST=SU;BYDAY=TU,TH

       or

       RRULE:FREQ=WEEKLY;COUNT=10;WKST=SU;BYDAY=TU,TH

       ==> (1997 9:00 AM EDT) September 2,4,9,11,16,18,23,25,30;
                              October 2

      Every other week on Monday, Wednesday, and Friday until December
      24, 1997, starting on Monday, September 1, 1997:

       DTSTART;TZID=America/New_York:19970901T090000
       RRULE:FREQ=WEEKLY;INTERVAL=2;UNTIL=19971224T000000Z;WKST=SU;
        BYDAY=MO,WE,FR

       ==> (1997 9:00 AM EDT) September 1,3,5,15,17,19,29;
                              October 1,3,13,15,17
           (1997 9:00 AM EST) October 27,29,31;
                              November 10,12,14,24,26,28;



Desruisseaux                Standards Track                   [Page 125]

RFC 5545                       iCalendar                  September 2009


                              December 8,10,12,22

      Every other week on Tuesday and Thursday, for 8 occurrences:

       DTSTART;TZID=America/New_York:19970902T090000
       RRULE:FREQ=WEEKLY;INTERVAL=2;COUNT=8;WKST=SU;BYDAY=TU,TH

       ==> (1997 9:00 AM EDT) September 2,4,16,18,30;
                              October 2,14,16

      Monthly on the first Friday for 10 occurrences:

       DTSTART;TZID=America/New_York:19970905T090000
       RRULE:FREQ=MONTHLY;COUNT=10;BYDAY=1FR

       ==> (1997 9:00 AM EDT) September 5;October 3
           (1997 9:00 AM EST) November 7;December 5
           (1998 9:00 AM EST) January 2;February 6;March 6;April 3
           (1998 9:00 AM EDT) May 1;June 5

      Monthly on the first Friday until December 24, 1997:

       DTSTART;TZID=America/New_York:19970905T090000
       RRULE:FREQ=MONTHLY;UNTIL=19971224T000000Z;BYDAY=1FR

       ==> (1997 9:00 AM EDT) September 5; October 3
           (1997 9:00 AM EST) November 7; December 5

      Every other month on the first and last Sunday of the month for 10
      occurrences:

       DTSTART;TZID=America/New_York:19970907T090000
       RRULE:FREQ=MONTHLY;INTERVAL=2;COUNT=10;BYDAY=1SU,-1SU

       ==> (1997 9:00 AM EDT) September 7,28
           (1997 9:00 AM EST) November 2,30
           (1998 9:00 AM EST) January 4,25;March 1,29
           (1998 9:00 AM EDT) May 3,31

      Monthly on the second-to-last Monday of the month for 6 months:

       DTSTART;TZID=America/New_York:19970922T090000
       RRULE:FREQ=MONTHLY;COUNT=6;BYDAY=-2MO

       ==> (1997 9:00 AM EDT) September 22;October 20
           (1997 9:00 AM EST) November 17;December 22
           (1998 9:00 AM EST) January 19;February 16




Desruisseaux                Standards Track                   [Page 126]

RFC 5545                       iCalendar                  September 2009


      Monthly on the third-to-the-last day of the month, forever:

       DTSTART;TZID=America/New_York:19970928T090000
       RRULE:FREQ=MONTHLY;BYMONTHDAY=-3

       ==> (1997 9:00 AM EDT) September 28
           (1997 9:00 AM EST) October 29;November 28;December 29
           (1998 9:00 AM EST) January 29;February 26
           ...

      Monthly on the 2nd and 15th of the month for 10 occurrences:

       DTSTART;TZID=America/New_York:19970902T090000
       RRULE:FREQ=MONTHLY;COUNT=10;BYMONTHDAY=2,15

       ==> (1997 9:00 AM EDT) September 2,15;October 2,15
           (1997 9:00 AM EST) November 2,15;December 2,15
           (1998 9:00 AM EST) January 2,15

      Monthly on the first and last day of the month for 10 occurrences:

       DTSTART;TZID=America/New_York:19970930T090000
       RRULE:FREQ=MONTHLY;COUNT=10;BYMONTHDAY=1,-1

       ==> (1997 9:00 AM EDT) September 30;October 1
           (1997 9:00 AM EST) October 31;November 1,30;December 1,31
           (1998 9:00 AM EST) January 1,31;February 1

      Every 18 months on the 10th thru 15th of the month for 10
      occurrences:

       DTSTART;TZID=America/New_York:19970910T090000
       RRULE:FREQ=MONTHLY;INTERVAL=18;COUNT=10;BYMONTHDAY=10,11,12,
        13,14,15

       ==> (1997 9:00 AM EDT) September 10,11,12,13,14,15
           (1999 9:00 AM EST) March 10,11,12,13

      Every Tuesday, every other month:

       DTSTART;TZID=America/New_York:19970902T090000
       RRULE:FREQ=MONTHLY;INTERVAL=2;BYDAY=TU

       ==> (1997 9:00 AM EDT) September 2,9,16,23,30
           (1997 9:00 AM EST) November 4,11,18,25
           (1998 9:00 AM EST) January 6,13,20,27;March 3,10,17,24,31
           ...




Desruisseaux                Standards Track                   [Page 127]

RFC 5545                       iCalendar                  September 2009


      Yearly in June and July for 10 occurrences:

       DTSTART;TZID=America/New_York:19970610T090000
       RRULE:FREQ=YEARLY;COUNT=10;BYMONTH=6,7

       ==> (1997 9:00 AM EDT) June 10;July 10
           (1998 9:00 AM EDT) June 10;July 10
           (1999 9:00 AM EDT) June 10;July 10
           (2000 9:00 AM EDT) June 10;July 10
           (2001 9:00 AM EDT) June 10;July 10

         Note: Since none of the BYDAY, BYMONTHDAY, or BYYEARDAY
         components are specified, the day is gotten from "DTSTART".

      Every other year on January, February, and March for 10
      occurrences:

       DTSTART;TZID=America/New_York:19970310T090000
       RRULE:FREQ=YEARLY;INTERVAL=2;COUNT=10;BYMONTH=1,2,3

       ==> (1997 9:00 AM EST) March 10
           (1999 9:00 AM EST) January 10;February 10;March 10
           (2001 9:00 AM EST) January 10;February 10;March 10
           (2003 9:00 AM EST) January 10;February 10;March 10

      Every third year on the 1st, 100th, and 200th day for 10
      occurrences:

       DTSTART;TZID=America/New_York:19970101T090000
       RRULE:FREQ=YEARLY;INTERVAL=3;COUNT=10;BYYEARDAY=1,100,200

       ==> (1997 9:00 AM EST) January 1
           (1997 9:00 AM EDT) April 10;July 19
           (2000 9:00 AM EST) January 1
           (2000 9:00 AM EDT) April 9;July 18
           (2003 9:00 AM EST) January 1
           (2003 9:00 AM EDT) April 10;July 19
           (2006 9:00 AM EST) January 1

      Every 20th Monday of the year, forever:

       DTSTART;TZID=America/New_York:19970519T090000
       RRULE:FREQ=YEARLY;BYDAY=20MO

       ==> (1997 9:00 AM EDT) May 19
           (1998 9:00 AM EDT) May 18
           (1999 9:00 AM EDT) May 17
           ...



Desruisseaux                Standards Track                   [Page 128]

RFC 5545                       iCalendar                  September 2009


      Monday of week number 20 (where the default start of the week is
      Monday), forever:

       DTSTART;TZID=America/New_York:19970512T090000
       RRULE:FREQ=YEARLY;BYWEEKNO=20;BYDAY=MO

       ==> (1997 9:00 AM EDT) May 12
           (1998 9:00 AM EDT) May 11
           (1999 9:00 AM EDT) May 17
           ...

      Every Thursday in March, forever:

       DTSTART;TZID=America/New_York:19970313T090000
       RRULE:FREQ=YEARLY;BYMONTH=3;BYDAY=TH

       ==> (1997 9:00 AM EST) March 13,20,27
           (1998 9:00 AM EST) March 5,12,19,26
           (1999 9:00 AM EST) March 4,11,18,25
           ...

      Every Thursday, but only during June, July, and August, forever:

       DTSTART;TZID=America/New_York:19970605T090000
       RRULE:FREQ=YEARLY;BYDAY=TH;BYMONTH=6,7,8

       ==> (1997 9:00 AM EDT) June 5,12,19,26;July 3,10,17,24,31;
                              August 7,14,21,28
           (1998 9:00 AM EDT) June 4,11,18,25;July 2,9,16,23,30;
                              August 6,13,20,27
           (1999 9:00 AM EDT) June 3,10,17,24;July 1,8,15,22,29;
                              August 5,12,19,26
           ...

      Every Friday the 13th, forever:

       DTSTART;TZID=America/New_York:19970902T090000
       EXDATE;TZID=America/New_York:19970902T090000
       RRULE:FREQ=MONTHLY;BYDAY=FR;BYMONTHDAY=13

       ==> (1998 9:00 AM EST) February 13;March 13;November 13
           (1999 9:00 AM EDT) August 13
           (2000 9:00 AM EDT) October 13
           ...







Desruisseaux                Standards Track                   [Page 129]

RFC 5545                       iCalendar                  September 2009


      The first Saturday that follows the first Sunday of the month,
      forever:

       DTSTART;TZID=America/New_York:19970913T090000
       RRULE:FREQ=MONTHLY;BYDAY=SA;BYMONTHDAY=7,8,9,10,11,12,13

       ==> (1997 9:00 AM EDT) September 13;October 11
           (1997 9:00 AM EST) November 8;December 13
           (1998 9:00 AM EST) January 10;February 7;March 7
           (1998 9:00 AM EDT) April 11;May 9;June 13...
           ...

      Every 4 years, the first Tuesday after a Monday in November,
      forever (U.S. Presidential Election day):

       DTSTART;TZID=America/New_York:19961105T090000
       RRULE:FREQ=YEARLY;INTERVAL=4;BYMONTH=11;BYDAY=TU;
        BYMONTHDAY=2,3,4,5,6,7,8

        ==> (1996 9:00 AM EST) November 5
            (2000 9:00 AM EST) November 7
            (2004 9:00 AM EST) November 2
            ...

      The third instance into the month of one of Tuesday, Wednesday, or
      Thursday, for the next 3 months:

       DTSTART;TZID=America/New_York:19970904T090000
       RRULE:FREQ=MONTHLY;COUNT=3;BYDAY=TU,WE,TH;BYSETPOS=3

       ==> (1997 9:00 AM EDT) September 4;October 7
           (1997 9:00 AM EST) November 6

      The second-to-last weekday of the month:

       DTSTART;TZID=America/New_York:19970929T090000
       RRULE:FREQ=MONTHLY;BYDAY=MO,TU,WE,TH,FR;BYSETPOS=-2

       ==> (1997 9:00 AM EDT) September 29
           (1997 9:00 AM EST) October 30;November 27;December 30
           (1998 9:00 AM EST) January 29;February 26;March 30
           ...









Desruisseaux                Standards Track                   [Page 130]

RFC 5545                       iCalendar                  September 2009


      Every 3 hours from 9:00 AM to 5:00 PM on a specific day:

       DTSTART;TZID=America/New_York:19970902T090000
       RRULE:FREQ=HOURLY;INTERVAL=3;UNTIL=19970902T170000Z

       ==> (September 2, 1997 EDT) 09:00,12:00,15:00

      Every 15 minutes for 6 occurrences:

       DTSTART;TZID=America/New_York:19970902T090000
       RRULE:FREQ=MINUTELY;INTERVAL=15;COUNT=6

       ==> (September 2, 1997 EDT) 09:00,09:15,09:30,09:45,10:00,10:15

      Every hour and a half for 4 occurrences:

       DTSTART;TZID=America/New_York:19970902T090000
       RRULE:FREQ=MINUTELY;INTERVAL=90;COUNT=4

       ==> (September 2, 1997 EDT) 09:00,10:30;12:00;13:30

      Every 20 minutes from 9:00 AM to 4:40 PM every day:

       DTSTART;TZID=America/New_York:19970902T090000
       RRULE:FREQ=DAILY;BYHOUR=9,10,11,12,13,14,15,16;BYMINUTE=0,20,40
       or
       RRULE:FREQ=MINUTELY;INTERVAL=20;BYHOUR=9,10,11,12,13,14,15,16

       ==> (September 2, 1997 EDT) 9:00,9:20,9:40,10:00,10:20,
                                   ... 16:00,16:20,16:40
           (September 3, 1997 EDT) 9:00,9:20,9:40,10:00,10:20,
                                   ...16:00,16:20,16:40
           ...

      An example where the days generated makes a difference because of
      WKST:

       DTSTART;TZID=America/New_York:19970805T090000
       RRULE:FREQ=WEEKLY;INTERVAL=2;COUNT=4;BYDAY=TU,SU;WKST=MO

       ==> (1997 EDT) August 5,10,19,24

      changing only WKST from MO to SU, yields different results...

       DTSTART;TZID=America/New_York:19970805T090000
       RRULE:FREQ=WEEKLY;INTERVAL=2;COUNT=4;BYDAY=TU,SU;WKST=SU

       ==> (1997 EDT) August 5,17,19,31



Desruisseaux                Standards Track                   [Page 131]

RFC 5545                       iCalendar                  September 2009


      An example where an invalid date (i.e., February 30) is ignored.

       DTSTART;TZID=America/New_York:20070115T090000
       RRULE:FREQ=MONTHLY;BYMONTHDAY=15,30;COUNT=5

       ==> (2007 EST) January 15,30
           (2007 EST) February 15
           (2007 EDT) March 15,30

3.8.6.  Alarm Component Properties

   The following properties specify alarm information in calendar
   components.

3.8.6.1.  Action

   Property Name:  ACTION

   Purpose:  This property defines the action to be invoked when an
      alarm is triggered.

   Value Type:  TEXT

   Property Parameters:  IANA and non-standard property parameters can
      be specified on this property.

   Conformance:  This property MUST be specified once in a "VALARM"
      calendar component.

   Description:  Each "VALARM" calendar component has a particular type
      of action with which it is associated.  This property specifies
      the type of action.  Applications MUST ignore alarms with x-name
      and iana-token values they don't recognize.

   Format Definition:  This property is defined by the following
      notation:

       action      = "ACTION" actionparam ":" actionvalue CRLF

       actionparam = *(";" other-param)


       actionvalue = "AUDIO" / "DISPLAY" / "EMAIL"
                   / iana-token / x-name

   Example:  The following are examples of this property in a "VALARM"
      calendar component:




Desruisseaux                Standards Track                   [Page 132]

RFC 5545                       iCalendar                  September 2009


       ACTION:AUDIO

       ACTION:DISPLAY

3.8.6.2.  Repeat Count

   Property Name:  REPEAT

   Purpose:  This property defines the number of times the alarm should
      be repeated, after the initial trigger.

   Value Type:  INTEGER

   Property Parameters:  IANA and non-standard property parameters can
      be specified on this property.

   Conformance:  This property can be specified in a "VALARM" calendar
      component.

   Description:  This property defines the number of times an alarm
      should be repeated after its initial trigger.  If the alarm
      triggers more than once, then this property MUST be specified
      along with the "DURATION" property.

   Format Definition:  This property is defined by the following
      notation:

       repeat  = "REPEAT" repparam ":" integer CRLF
       ;Default is "0", zero.

       repparam   = *(";" other-param)

   Example:  The following is an example of this property for an alarm
      that repeats 4 additional times with a 5-minute delay after the
      initial triggering of the alarm:

       REPEAT:4
       DURATION:PT5M

3.8.6.3.  Trigger

   Property Name:  TRIGGER

   Purpose:  This property specifies when an alarm will trigger.

   Value Type:  The default value type is DURATION.  The value type can
      be set to a DATE-TIME value type, in which case the value MUST
      specify a UTC-formatted DATE-TIME value.



Desruisseaux                Standards Track                   [Page 133]

RFC 5545                       iCalendar                  September 2009


   Property Parameters:  IANA, non-standard, value data type, time zone
      identifier, or trigger relationship property parameters can be
      specified on this property.  The trigger relationship property
      parameter MUST only be specified when the value type is
      "DURATION".

   Conformance:  This property MUST be specified in the "VALARM"
      calendar component.

   Description:  This property defines when an alarm will trigger.  The
      default value type is DURATION, specifying a relative time for the
      trigger of the alarm.  The default duration is relative to the
      start of an event or to-do with which the alarm is associated.
      The duration can be explicitly set to trigger from either the end
      or the start of the associated event or to-do with the "RELATED"
      parameter.  A value of START will set the alarm to trigger off the
      start of the associated event or to-do.  A value of END will set
      the alarm to trigger off the end of the associated event or to-do.

      Either a positive or negative duration may be specified for the
      "TRIGGER" property.  An alarm with a positive duration is
      triggered after the associated start or end of the event or to-do.
      An alarm with a negative duration is triggered before the
      associated start or end of the event or to-do.

      The "RELATED" property parameter is not valid if the value type of
      the property is set to DATE-TIME (i.e., for an absolute date and
      time alarm trigger).  If a value type of DATE-TIME is specified,
      then the property value MUST be specified in the UTC time format.
      If an absolute trigger is specified on an alarm for a recurring
      event or to-do, then the alarm will only trigger for the specified
      absolute DATE-TIME, along with any specified repeating instances.

      If the trigger is set relative to START, then the "DTSTART"
      property MUST be present in the associated "VEVENT" or "VTODO"
      calendar component.  If an alarm is specified for an event with
      the trigger set relative to the END, then the "DTEND" property or
      the "DTSTART" and "DURATION " properties MUST be present in the
      associated "VEVENT" calendar component.  If the alarm is specified
      for a to-do with a trigger set relative to the END, then either
      the "DUE" property or the "DTSTART" and "DURATION " properties
      MUST be present in the associated "VTODO" calendar component.

      Alarms specified in an event or to-do that is defined in terms of
      a DATE value type will be triggered relative to 00:00:00 of the
      user's configured time zone on the specified date, or relative to
      00:00:00 UTC on the specified date if no configured time zone can
      be found for the user.  For example, if "DTSTART" is a DATE value



Desruisseaux                Standards Track                   [Page 134]

RFC 5545                       iCalendar                  September 2009


      set to 19980205 then the duration trigger will be relative to
      19980205T000000 America/New_York for a user configured with the
      America/New_York time zone.

   Format Definition:  This property is defined by the following
      notation:

       trigger    = "TRIGGER" (trigrel / trigabs) CRLF

       trigrel    = *(
                  ;
                  ; The following are OPTIONAL,
                  ; but MUST NOT occur more than once.
                  ;
                  (";" "VALUE" "=" "DURATION") /
                  (";" trigrelparam) /
                  ;
                  ; The following is OPTIONAL,
                  ; and MAY occur more than once.
                  ;
                  (";" other-param)
                  ;
                  ) ":"  dur-value

       trigabs    = *(
                  ;
                  ; The following is REQUIRED,
                  ; but MUST NOT occur more than once.
                  ;
                  (";" "VALUE" "=" "DATE-TIME") /
                  ;
                  ; The following is OPTIONAL,
                  ; and MAY occur more than once.
                  ;
                  (";" other-param)
                  ;
                  ) ":" date-time

   Example:  A trigger set 15 minutes prior to the start of the event or
      to-do.

       TRIGGER:-PT15M

      A trigger set five minutes after the end of an event or the due
      date of a to-do.

       TRIGGER;RELATED=END:PT5M




Desruisseaux                Standards Track                   [Page 135]

RFC 5545                       iCalendar                  September 2009


      A trigger set to an absolute DATE-TIME.

       TRIGGER;VALUE=DATE-TIME:19980101T050000Z

3.8.7.  Change Management Component Properties

   The following properties specify change management information in
   calendar components.

3.8.7.1.  Date-Time Created

   Property Name:  CREATED

   Purpose:  This property specifies the date and time that the calendar
      information was created by the calendar user agent in the calendar
      store.

         Note: This is analogous to the creation date and time for a
         file in the file system.

   Value Type:  DATE-TIME

   Property Parameters:  IANA and non-standard property parameters can
      be specified on this property.

   Conformance:  The property can be specified once in "VEVENT",
      "VTODO", or "VJOURNAL" calendar components.  The value MUST be
      specified as a date with UTC time.

   Description:  This property specifies the date and time that the
      calendar information was created by the calendar user agent in the
      calendar store.

   Format Definition:  This property is defined by the following
      notation:

       created    = "CREATED" creaparam ":" date-time CRLF

       creaparam  = *(";" other-param)

   Example:  The following is an example of this property:

       CREATED:19960329T133000Z








Desruisseaux                Standards Track                   [Page 136]

RFC 5545                       iCalendar                  September 2009


3.8.7.2.  Date-Time Stamp

   Property Name:  DTSTAMP

   Purpose:  In the case of an iCalendar object that specifies a
      "METHOD" property, this property specifies the date and time that
      the instance of the iCalendar object was created.  In the case of
      an iCalendar object that doesn't specify a "METHOD" property, this
      property specifies the date and time that the information
      associated with the calendar component was last revised in the
      calendar store.

   Value Type:  DATE-TIME

   Property Parameters:  IANA and non-standard property parameters can
      be specified on this property.

   Conformance:  This property MUST be included in the "VEVENT",
      "VTODO", "VJOURNAL", or "VFREEBUSY" calendar components.

   Description:  The value MUST be specified in the UTC time format.

      This property is also useful to protocols such as [2447bis] that
      have inherent latency issues with the delivery of content.  This
      property will assist in the proper sequencing of messages
      containing iCalendar objects.

      In the case of an iCalendar object that specifies a "METHOD"
      property, this property differs from the "CREATED" and "LAST-
      MODIFIED" properties.  These two properties are used to specify
      when the particular calendar data in the calendar store was
      created and last modified.  This is different than when the
      iCalendar object representation of the calendar service
      information was created or last modified.

      In the case of an iCalendar object that doesn't specify a "METHOD"
      property, this property is equivalent to the "LAST-MODIFIED"
      property.

   Format Definition:  This property is defined by the following
      notation:

       dtstamp    = "DTSTAMP" stmparam ":" date-time CRLF

       stmparam   = *(";" other-param)






Desruisseaux                Standards Track                   [Page 137]

RFC 5545                       iCalendar                  September 2009


   Example:

       DTSTAMP:19971210T080000Z

3.8.7.3.  Last Modified

   Property Name:  LAST-MODIFIED

   Purpose:  This property specifies the date and time that the
      information associated with the calendar component was last
      revised in the calendar store.

         Note: This is analogous to the modification date and time for a
         file in the file system.

   Value Type:  DATE-TIME

   Property Parameters:  IANA and non-standard property parameters can
      be specified on this property.

   Conformance:  This property can be specified in the "VEVENT",
      "VTODO", "VJOURNAL", or "VTIMEZONE" calendar components.

   Description:  The property value MUST be specified in the UTC time
      format.

   Format Definition:  This property is defined by the following
      notation:

       last-mod   = "LAST-MODIFIED" lstparam ":" date-time CRLF

       lstparam   = *(";" other-param)

   Example:  The following is an example of this property:

       LAST-MODIFIED:19960817T133000Z

3.8.7.4.  Sequence Number

   Property Name:  SEQUENCE

   Purpose:  This property defines the revision sequence number of the
      calendar component within a sequence of revisions.

   Value Type:  INTEGER

   Property Parameters:  IANA and non-standard property parameters can
      be specified on this property.



Desruisseaux                Standards Track                   [Page 138]

RFC 5545                       iCalendar                  September 2009


   Conformance:  The property can be specified in "VEVENT", "VTODO", or
      "VJOURNAL" calendar component.

   Description:  When a calendar component is created, its sequence
      number is 0.  It is monotonically incremented by the "Organizer's"
      CUA each time the "Organizer" makes a significant revision to the
      calendar component.

      The "Organizer" includes this property in an iCalendar object that
      it sends to an "Attendee" to specify the current version of the
      calendar component.

      The "Attendee" includes this property in an iCalendar object that
      it sends to the "Organizer" to specify the version of the calendar
      component to which the "Attendee" is referring.

      A change to the sequence number is not the mechanism that an
      "Organizer" uses to request a response from the "Attendees".  The
      "RSVP" parameter on the "ATTENDEE" property is used by the
      "Organizer" to indicate that a response from the "Attendees" is
      requested.

      Recurrence instances of a recurring component MAY have different
      sequence numbers.

   Format Definition:  This property is defined by the following
      notation:

       seq = "SEQUENCE" seqparam ":" integer CRLF
       ; Default is "0"

       seqparam   = *(";" other-param)

   Example:  The following is an example of this property for a calendar
      component that was just created by the "Organizer":

       SEQUENCE:0

      The following is an example of this property for a calendar
      component that has been revised two different times by the
      "Organizer":

       SEQUENCE:2

3.8.8.  Miscellaneous Component Properties

   The following properties specify information about a number of
   miscellaneous features of calendar components.



Desruisseaux                Standards Track                   [Page 139]

RFC 5545                       iCalendar                  September 2009


3.8.8.1.  IANA Properties

   Property Name:  An IANA-registered property name

   Value Type:  The default value type is TEXT.  The value type can be
      set to any value type.

   Property Parameters:  Any parameter can be specified on this
      property.

   Description:  This specification allows other properties registered
      with IANA to be specified in any calendar components.  Compliant
      applications are expected to be able to parse these other IANA-
      registered properties but can ignore them.

   Format Definition:  This property is defined by the following
      notation:

       iana-prop = iana-token *(";" icalparameter) ":" value CRLF

   Example:  The following are examples of properties that might be
      registered to IANA:

       DRESSCODE:CASUAL

       NON-SMOKING;VALUE=BOOLEAN:TRUE

3.8.8.2.  Non-Standard Properties

   Property Name:  Any property name with a "X-" prefix

   Purpose:  This class of property provides a framework for defining
      non-standard properties.

   Value Type:  The default value type is TEXT.  The value type can be
      set to any value type.

   Property Parameters:  IANA, non-standard, and language property
      parameters can be specified on this property.

   Conformance:  This property can be specified in any calendar
      component.

   Description:  The MIME Calendaring and Scheduling Content Type
      provides a "standard mechanism for doing non-standard things".
      This extension support is provided for implementers to "push the
      envelope" on the existing version of the memo.  Extension
      properties are specified by property and/or property parameter



Desruisseaux                Standards Track                   [Page 140]

RFC 5545                       iCalendar                  September 2009


      names that have the prefix text of "X-" (the two-character
      sequence: LATIN CAPITAL LETTER X character followed by the HYPHEN-
      MINUS character).  It is recommended that vendors concatenate onto
      this sentinel another short prefix text to identify the vendor.
      This will facilitate readability of the extensions and minimize
      possible collision of names between different vendors.  User
      agents that support this content type are expected to be able to
      parse the extension properties and property parameters but can
      ignore them.

      At present, there is no registration authority for names of
      extension properties and property parameters.  The value type for
      this property is TEXT.  Optionally, the value type can be any of
      the other valid value types.

   Format Definition:  This property is defined by the following
      notation:

       x-prop = x-name *(";" icalparameter) ":" value CRLF

   Example:  The following might be the ABC vendor's extension for an
      audio-clip form of subject property:

       X-ABC-MMSUBJ;VALUE=URI;FMTTYPE=audio/basic:http://www.example.
        org/mysubj.au

3.8.8.3.  Request Status

   Property Name:  REQUEST-STATUS

   Purpose:  This property defines the status code returned for a
      scheduling request.

   Value Type:  TEXT

   Property Parameters:  IANA, non-standard, and language property
      parameters can be specified on this property.

   Conformance:  The property can be specified in the "VEVENT", "VTODO",
      "VJOURNAL", or "VFREEBUSY" calendar component.

   Description:  This property is used to return status code information
      related to the processing of an associated iCalendar object.  The
      value type for this property is TEXT.







Desruisseaux                Standards Track                   [Page 141]

RFC 5545                       iCalendar                  September 2009


      The value consists of a short return status component, a longer
      return status description component, and optionally a status-
      specific data component.  The components of the value are
      separated by the SEMICOLON character.

      The short return status is a PERIOD character separated pair or
      3-tuple of integers.  For example, "3.1" or "3.1.1".  The
      successive levels of integers provide for a successive level of
      status code granularity.

      The following are initial classes for the return status code.
      Individual iCalendar object methods will define specific return
      status codes for these classes.  In addition, other classes for
      the return status code may be defined using the registration
      process defined later in this memo.

   +--------+----------------------------------------------------------+
   | Short  | Longer Return Status Description                         |
   | Return |                                                          |
   | Status |                                                          |
   | Code   |                                                          |
   +--------+----------------------------------------------------------+
   | 1.xx   | Preliminary success.  This class of status code          |
   |        | indicates that the request has been initially processed  |
   |        | but that completion is pending.                          |
   |        |                                                          |
   | 2.xx   | Successful.  This class of status code indicates that    |
   |        | the request was completed successfully.  However, the    |
   |        | exact status code can indicate that a fallback has been  |
   |        | taken.                                                   |
   |        |                                                          |
   | 3.xx   | Client Error.  This class of status code indicates that  |
   |        | the request was not successful.  The error is the result |
   |        | of either a syntax or a semantic error in the client-    |
   |        | formatted request.  Request should not be retried until  |
   |        | the condition in the request is corrected.               |
   |        |                                                          |
   | 4.xx   | Scheduling Error.  This class of status code indicates   |
   |        | that the request was not successful.  Some sort of error |
   |        | occurred within the calendaring and scheduling service,  |
   |        | not directly related to the request itself.              |
   +--------+----------------------------------------------------------+









Desruisseaux                Standards Track                   [Page 142]

RFC 5545                       iCalendar                  September 2009


   Format Definition:  This property is defined by the following
      notation:

       rstatus    = "REQUEST-STATUS" rstatparam ":"
                    statcode ";" statdesc [";" extdata]

       rstatparam = *(
                  ;
                  ; The following is OPTIONAL,
                  ; but MUST NOT occur more than once.
                  ;
                  (";" languageparam) /
                  ;
                  ; The following is OPTIONAL,
                  ; and MAY occur more than once.
                  ;
                  (";" other-param)
                  ;
                  )

       statcode   = 1*DIGIT 1*2("." 1*DIGIT)
       ;Hierarchical, numeric return status code

       statdesc   = text
       ;Textual status description

       extdata    = text
       ;Textual exception data.  For example, the offending property
       ;name and value or complete property line.

   Example:  The following are some possible examples of this property.

      The COMMA and SEMICOLON separator characters in the property value
      are BACKSLASH character escaped because they appear in a text
      value.

       REQUEST-STATUS:2.0;Success

       REQUEST-STATUS:3.1;Invalid property value;DTSTART:96-Apr-01

       REQUEST-STATUS:2.8; Success\, repeating event ignored. Scheduled
        as a single event.;RRULE:FREQ=WEEKLY\;INTERVAL=2

       REQUEST-STATUS:4.1;Event conflict.  Date-time is busy.

       REQUEST-STATUS:3.7;Invalid calendar user;ATTENDEE:
        mailto:jsmith@example.com




Desruisseaux                Standards Track                   [Page 143]

RFC 5545                       iCalendar                  September 2009


4.  iCalendar Object Examples

   The following examples are provided as an informational source of
   illustrative iCalendar objects consistent with this content type.

   The following example specifies a three-day conference that begins at
   2:30 P.M. UTC, September 18, 1996 and ends at 10:00 P.M. UTC,
   September 20, 1996.

       BEGIN:VCALENDAR
       PRODID:-//xyz Corp//NONSGML PDA Calendar Version 1.0//EN
       VERSION:2.0
       BEGIN:VEVENT
       DTSTAMP:19960704T120000Z
       UID:uid1@example.com
       ORGANIZER:mailto:jsmith@example.com
       DTSTART:19960918T143000Z
       DTEND:19960920T220000Z
       STATUS:CONFIRMED
       CATEGORIES:CONFERENCE
       SUMMARY:Networld+Interop Conference
       DESCRIPTION:Networld+Interop Conference
         and Exhibit\nAtlanta World Congress Center\n
        Atlanta\, Georgia
       END:VEVENT
       END:VCALENDAR

   The following example specifies a group-scheduled meeting that begins
   at 8:30 AM EST on March 12, 1998 and ends at 9:30 AM EST on March 12,
   1998.  The "Organizer" has scheduled the meeting with one or more
   calendar users in a group.  A time zone specification for Eastern
   United States has been specified.

       BEGIN:VCALENDAR
       PRODID:-//RDU Software//NONSGML HandCal//EN
       VERSION:2.0
       BEGIN:VTIMEZONE
       TZID:America/New_York
       BEGIN:STANDARD
       DTSTART:19981025T020000
       TZOFFSETFROM:-0400
       TZOFFSETTO:-0500
       TZNAME:EST
       END:STANDARD
       BEGIN:DAYLIGHT
       DTSTART:19990404T020000
       TZOFFSETFROM:-0500
       TZOFFSETTO:-0400



Desruisseaux                Standards Track                   [Page 144]

RFC 5545                       iCalendar                  September 2009


       TZNAME:EDT
       END:DAYLIGHT
       END:VTIMEZONE
       BEGIN:VEVENT
       DTSTAMP:19980309T231000Z
       UID:guid-1.example.com
       ORGANIZER:mailto:mrbig@example.com
       ATTENDEE;RSVP=TRUE;ROLE=REQ-PARTICIPANT;CUTYPE=GROUP:
        mailto:employee-A@example.com
       DESCRIPTION:Project XYZ Review Meeting
       CATEGORIES:MEETING
       CLASS:PUBLIC
       CREATED:19980309T130000Z
       SUMMARY:XYZ Project Review
       DTSTART;TZID=America/New_York:19980312T083000
       DTEND;TZID=America/New_York:19980312T093000
       LOCATION:1CP Conference Room 4350
       END:VEVENT
       END:VCALENDAR

   The following is an example of an iCalendar object passed in a MIME
   message with a single body part consisting of a "text/calendar"
   Content Type.

       TO:jsmith@example.com
       FROM:jdoe@example.com
       MIME-VERSION:1.0
       MESSAGE-ID:<id3@example.com>
       CONTENT-TYPE:text/calendar; method="xyz"; component="VEVENT"

       BEGIN:VCALENDAR
       METHOD:xyz
       VERSION:2.0
       PRODID:-//ABC Corporation//NONSGML My Product//EN
       BEGIN:VEVENT
       DTSTAMP:19970324T120000Z
       SEQUENCE:0
       UID:uid3@example.com
       ORGANIZER:mailto:jdoe@example.com
       ATTENDEE;RSVP=TRUE:mailto:jsmith@example.com
       DTSTART:19970324T123000Z
       DTEND:19970324T210000Z
       CATEGORIES:MEETING,PROJECT
       CLASS:PUBLIC
       SUMMARY:Calendaring Interoperability Planning Meeting
       DESCRIPTION:Discuss how we can test c&s interoperability\n
        using iCalendar and other IETF standards.
       LOCATION:LDB Lobby



Desruisseaux                Standards Track                   [Page 145]

RFC 5545                       iCalendar                  September 2009


       ATTACH;FMTTYPE=application/postscript:ftp://example.com/pub/
        conf/bkgrnd.ps
       END:VEVENT
       END:VCALENDAR

   The following is an example of a to-do due on April 15, 1998.  An
   audio alarm has been specified to remind the calendar user at noon,
   the day before the to-do is expected to be completed and repeat
   hourly, four additional times.  The to-do definition has been
   modified twice since it was initially created.

       BEGIN:VCALENDAR
       VERSION:2.0
       PRODID:-//ABC Corporation//NONSGML My Product//EN
       BEGIN:VTODO
       DTSTAMP:19980130T134500Z
       SEQUENCE:2
       UID:uid4@example.com
       ORGANIZER:mailto:unclesam@example.com
       ATTENDEE;PARTSTAT=ACCEPTED:mailto:jqpublic@example.com
       DUE:19980415T000000
       STATUS:NEEDS-ACTION
       SUMMARY:Submit Income Taxes
       BEGIN:VALARM
       ACTION:AUDIO
       TRIGGER:19980403T120000Z
       ATTACH;FMTTYPE=audio/basic:http://example.com/pub/audio-
        files/ssbanner.aud
       REPEAT:4
       DURATION:PT1H
       END:VALARM
       END:VTODO
       END:VCALENDAR

   The following is an example of a journal entry:

       BEGIN:VCALENDAR
       VERSION:2.0
       PRODID:-//ABC Corporation//NONSGML My Product//EN
       BEGIN:VJOURNAL
       DTSTAMP:19970324T120000Z
       UID:uid5@example.com
       ORGANIZER:mailto:jsmith@example.com
       STATUS:DRAFT
       CLASS:PUBLIC
       CATEGORIES:Project Report,XYZ,Weekly Meeting
       DESCRIPTION:Project xyz Review Meeting Minutes\n
        Agenda\n1. Review of project version 1.0 requirements.\n2.



Desruisseaux                Standards Track                   [Page 146]

RFC 5545                       iCalendar                  September 2009


         Definition
        of project processes.\n3. Review of project schedule.\n
        Participants: John Smith\, Jane Doe\, Jim Dandy\n-It was
         decided that the requirements need to be signed off by
         product marketing.\n-Project processes were accepted.\n
        -Project schedule needs to account for scheduled holidays
         and employee vacation time. Check with HR for specific
         dates.\n-New schedule will be distributed by Friday.\n-
        Next weeks meeting is cancelled. No meeting until 3/23.
       END:VJOURNAL
       END:VCALENDAR

   The following is an example of published busy time information.  The
   iCalendar object might be placed in the network resource
   http://www.example.com/calendar/busytime/jsmith.ifb.

       BEGIN:VCALENDAR
       VERSION:2.0
       PRODID:-//RDU Software//NONSGML HandCal//EN
       BEGIN:VFREEBUSY
       ORGANIZER:mailto:jsmith@example.com
       DTSTART:19980313T141711Z
       DTEND:19980410T141711Z
       FREEBUSY:19980314T233000Z/19980315T003000Z
       FREEBUSY:19980316T153000Z/19980316T163000Z
       FREEBUSY:19980318T030000Z/19980318T040000Z
       URL:http://www.example.com/calendar/busytime/jsmith.ifb
       END:VFREEBUSY
       END:VCALENDAR

5.  Recommended Practices

   These recommended practices should be followed in order to assure
   consistent handling of the following cases for an iCalendar object.

   1.  Content lines longer than 75 octets SHOULD be folded.

   2.  When the combination of the "RRULE" and "RDATE" properties in a
       recurring component produces multiple instances having the same
       start DATE-TIME value, they should be collapsed to, and
       considered as, a single instance.  If the "RDATE" property is
       specified as a PERIOD value the duration of the recurrence
       instance will be the one specified by the "RDATE" property, and
       not the duration of the recurrence instance defined by the
       "DTSTART" property.

   3.  When a calendar user receives multiple requests for the same
       calendar component (e.g., REQUEST for a "VEVENT" calendar



Desruisseaux                Standards Track                   [Page 147]

RFC 5545                       iCalendar                  September 2009


       component) as a result of being on multiple mailing lists
       specified by "ATTENDEE" properties in the request, they SHOULD
       respond to only one of the requests.  The calendar user SHOULD
       also specify (using the "MEMBER" parameter of the "ATTENDEE"
       property) of which mailing list they are a member.

   4.  An implementation can truncate a "SUMMARY" property value to 255
       octets, but it MUST NOT truncate the value in the middle of a
       UTF-8 multi-octet sequence.

   5.  If seconds of the minute are not supported by an implementation,
       then a value of "00" SHOULD be specified for the seconds
       component in a time value.

   6.  "TZURL" values SHOULD NOT be specified as a file URI type.  This
       URI form can be useful within an organization, but is problematic
       in the Internet.

   7.  Some possible English values for "CATEGORIES" property include:
       "ANNIVERSARY", "APPOINTMENT", "BUSINESS", "EDUCATION", "HOLIDAY",
       "MEETING", "MISCELLANEOUS", "NON-WORKING HOURS", "NOT IN OFFICE",
       "PERSONAL", "PHONE CALL", "SICK DAY", "SPECIAL OCCASION",
       "TRAVEL", "VACATION".  Categories can be specified in any
       registered language.

   8.  Some possible English values for the "RESOURCES" property
       include: "CATERING", "CHAIRS", "COMPUTER PROJECTOR", "EASEL",
       "OVERHEAD PROJECTOR", "SPEAKER PHONE", "TABLE", "TV", "VCR",
       "VIDEO PHONE", "VEHICLE".  Resources can be specified in any
       registered language.

6.  Internationalization Considerations

   Applications MUST generate iCalendar streams in the UTF-8 charset and
   MUST accept an iCalendar stream in the UTF-8 or US-ASCII charset.

7.  Security Considerations

   Because calendaring and scheduling information is very privacy-
   sensitive, the protocol used for the transmission of calendaring and
   scheduling information should have capabilities to protect the
   information from possible threats, such as eavesdropping, replay,
   message insertion, deletion, modification, and man-in-the-middle
   attacks.

   As this document only defines the data format and media type of text/
   calendar that is independent of any calendar service or protocol, it
   is up to the actual protocol specifications such as iTIP [2446bis],



Desruisseaux                Standards Track                   [Page 148]

RFC 5545                       iCalendar                  September 2009


   iMIP [2447bis], and "Calendaring Extensions to WebDAV (CalDAV)"
   [RFC4791] to describe the threats that the above attacks present, as
   well as ways in which to mitigate them.

8.  IANA Considerations

8.1.  iCalendar Media Type Registration

   The Calendaring and Scheduling Core Object Specification is intended
   for use as a MIME content type.

   To: ietf-types@iana.org

   Subject: Registration of media type text/calendar

   Type name:  text

   Subtype name:  calendar

   Required parameters:  none

   Optional parameters:  charset, method, component, and optinfo

      The "charset" parameter is defined in [RFC2046] for subtypes of
      the "text" media type.  It is used to indicate the charset used in
      the body part.  The charset supported by this revision of
      iCalendar is UTF-8.  The use of any other charset is deprecated by
      this revision of iCalendar; however, note that this revision
      requires that compliant applications MUST accept iCalendar streams
      using either the UTF-8 or US-ASCII charset.

      The "method" parameter is used to convey the iCalendar object
      method or transaction semantics for the calendaring and scheduling
      information.  It also is an identifier for the restricted set of
      properties and values of which the iCalendar object consists.  The
      parameter is to be used as a guide for applications interpreting
      the information contained within the body part.  It SHOULD NOT be
      used to exclude or require particular pieces of information unless
      the identified method definition specifically calls for this
      behavior.  Unless specifically forbidden by a particular method
      definition, a text/calendar content type can contain any set of
      properties permitted by the Calendaring and Scheduling Core Object
      Specification.  The "method" parameter MUST be specified and MUST
      be set to the same value as the "METHOD" component property of the
      iCalendar objects of the iCalendar stream if and only if the
      iCalendar objects in the iCalendar stream all have a "METHOD"
      component property set to the same value.




Desruisseaux                Standards Track                   [Page 149]

RFC 5545                       iCalendar                  September 2009


      The value for the "method" parameter is defined as follows:

       method  = 1*(ALPHA / DIGIT / "-")
       ; IANA-registered iCalendar object method

      The "component" parameter conveys the type of iCalendar calendar
      component within the body part.  If the iCalendar object contains
      more than one calendar component type, then multiple component
      parameters MUST be specified.

      The value for the "component" parameter is defined as follows:

       component = "VEVENT"
                 / "VTODO"
                 / "VJOURNAL"
                 / "VFREEBUSY"
                 / "VTIMEZONE"
                 / iana-token
                 / x-name

      The "optinfo" parameter conveys optional information about the
      iCalendar object within the body part.  This parameter can only
      specify semantics already specified by the iCalendar object and
      that can be otherwise determined by parsing the body part.  In
      addition, the optional information specified by this parameter
      MUST be consistent with that information specified by the
      iCalendar object.  For example, it can be used to convey the
      "Attendee" response status to a meeting request.  The parameter
      value consists of a string value.

      The parameter can be specified multiple times.

      The value for the "optinfo" parameter is defined as follows:

       optinfo    = infovalue / qinfovalue

       infovalue  = iana-token / x-name

       qinfovalue = DQUOTE (infovalue) DQUOTE

   Encoding considerations:  This media type can contain 8bit
      characters, so the use of quoted-printable or base64 MIME Content-
      Transfer-Encodings might be necessary when iCalendar objects are
      transferred across protocols restricted to the 7bit repertoire.
      Note that a text valued property in the content entity can also
      have content encoding of special characters using a BACKSLASH
      character escapement technique.  This means that content values
      can end up being encoded twice.



Desruisseaux                Standards Track                   [Page 150]

RFC 5545                       iCalendar                  September 2009


   Security considerations:  See Section 7.

   Interoperability considerations:  This media type is intended to
      define a common format for conveying calendaring and scheduling
      information between different systems.  It is heavily based on the
      earlier [VCAL] industry specification.

   Published specification:  This specification.

   Applications that use this media type:  This media type is designed
      for widespread use by Internet calendaring and scheduling
      applications.  In addition, applications in the workflow and
      document management area might find this content-type applicable.
      The iTIP [2446bis], iMIP [2447bis], and CalDAV [RFC4791] Internet
      protocols directly use this media type also.

   Additional information:

      Magic number(s):  None.

      File extension(s):  The file extension of "ics" is to be used to
         designate a file containing (an arbitrary set of) calendaring
         and scheduling information consistent with this MIME content
         type.

         The file extension of "ifb" is to be used to designate a file
         containing free or busy time information consistent with this
         MIME content type.

      Macintosh file type code(s):  The file type code of "iCal" is to
         be used in Apple MacIntosh operating system environments to
         designate a file containing calendaring and scheduling
         information consistent with this MIME media type.

         The file type code of "iFBf" is to be used in Apple MacIntosh
         operating system environments to designate a file containing
         free or busy time information consistent with this MIME media
         type.

   Person & email address to contact for further information:  See the
      "Author's Address" section of this document.

   Intended usage:  COMMON

   Restrictions on usage:  There are no restrictions on where this media
      type can be used.

   Author:  See the "Author's Address" section of this document.



Desruisseaux                Standards Track                   [Page 151]

RFC 5545                       iCalendar                  September 2009


   Change controller:  IETF

8.2.  New iCalendar Elements Registration

   This section defines the process to register new or modified
   iCalendar elements, that is, components, properties, parameters,
   value data types, and values, with IANA.

8.2.1.  iCalendar Elements Registration Procedure

   The IETF will create a mailing list, icalendar@ietf.org, which can be
   used for public discussion of iCalendar elements proposals prior to
   registration.  Use of the mailing list is strongly encouraged.  The
   IESG will appoint a designated expert who will monitor the
   icalendar@ietf.org mailing list and review registrations.

   Registration of new iCalendar elements MUST be reviewed by the
   designated expert and published in an RFC.  A Standards Track RFC is
   REQUIRED for the registration of new value data types that modify
   existing properties, as well as for the registration of participation
   status values to be used in "VEVENT" calendar components.  A
   Standards Track RFC is also REQUIRED for registration of iCalendar
   elements that modify iCalendar elements previously documented in a
   Standards Track RFC.

   The registration procedure begins when a completed registration
   template, defined in the sections below, is sent to
   icalendar@ietf.org and iana@iana.org.  The designated expert is
   expected to tell IANA and the submitter of the registration within
   two weeks whether the registration is approved, approved with minor
   changes, or rejected with cause.  When a registration is rejected
   with cause, it can be re-submitted if the concerns listed in the
   cause are addressed.  Decisions made by the designated expert can be
   appealed to the IESG Applications Area Director, then to the IESG.
   They follow the normal appeals procedure for IESG decisions.

8.2.2.  Registration Template for Components

   A component is defined by completing the following template.

   Component name:  The name of the component.

   Purpose:  The purpose of the component.  Give a short but clear
      description.

   Format definition:  The ABNF for the component definition needs to be
      specified.




Desruisseaux                Standards Track                   [Page 152]

RFC 5545                       iCalendar                  September 2009


   Description:  Any special notes about the component, how it is to be
      used, etc.

   Example(s):  One or more examples of instances of the component need
      to be specified.

8.2.3.  Registration Template for Properties

   A property is defined by completing the following template.

   Property name:  The name of the property.

   Purpose:  The purpose of the property.  Give a short but clear
      description.

   Value type:  Any of the valid value types for the property value need
      to be specified.  The default value type also needs to be
      specified.

   Property parameters:  Any of the valid property parameters for the
      property MUST be specified.

   Conformance:  The calendar components in which the property can
      appear MUST be specified.

   Description:  Any special notes about the property, how it is to be
      used, etc.

   Format definition:  The ABNF for the property definition needs to be
      specified.

   Example(s):  One or more examples of instances of the property need
      to be specified.

8.2.4.  Registration Template for Parameters

   A parameter is defined by completing the following template.

   Parameter name:  The name of the parameter.

   Purpose:  The purpose of the parameter.  Give a short but clear
      description.

   Format definition:  The ABNF for the parameter definition needs to be
      specified.

   Description:  Any special notes about the parameter, how it is to be
      used, etc.



Desruisseaux                Standards Track                   [Page 153]

RFC 5545                       iCalendar                  September 2009


   Example(s):  One or more examples of instances of the parameter need
      to be specified.

8.2.5.  Registration Template for Value Data Types

   A value data type is defined by completing the following template.

   Value name:  The name of the value type.

   Purpose:  The purpose of the value type.  Give a short but clear
      description.

   Format definition:  The ABNF for the value type definition needs to
      be specified.

   Description:  Any special notes about the value type, how it is to be
      used, etc.

   Example(s):  One or more examples of instances of the value type need
      to be specified.

8.2.6.  Registration Template for Values

   A value is defined by completing the following template.

   Value:  The value literal.

   Purpose:  The purpose of the value.  Give a short but clear
      description.

   Conformance:  The calendar properties and/or parameters that can take
      this value need to be specified.

   Example(s):  One or more examples of instances of the value need to
      be specified.

   The following is a fictitious example of a registration of an
   iCalendar value:

   Value:  TOP-SECRET

   Purpose:  This value is used to specify the access classification of
      top-secret calendar components.

   Conformance:  This value can be used with the "CLASS" property.






Desruisseaux                Standards Track                   [Page 154]

RFC 5545                       iCalendar                  September 2009


   Example(s):  The following is an example of this value used with the
      "CLASS" property:

     CLASS:TOP-SECRET

8.3.  Initial iCalendar Elements Registries

   The IANA created and maintains the following registries for iCalendar
   elements with pointers to appropriate reference documents.

8.3.1.  Components Registry

   The following table has been used to initialize the components
   registry.

             +-----------+---------+-------------------------+
             | Component | Status  | Reference               |
             +-----------+---------+-------------------------+
             | VCALENDAR | Current | RFC 5545, Section 3.4   |
             |           |         |                         |
             | VEVENT    | Current | RFC 5545, Section 3.6.1 |
             |           |         |                         |
             | VTODO     | Current | RFC 5545, Section 3.6.2 |
             |           |         |                         |
             | VJOURNAL  | Current | RFC 5545, Section 3.6.3 |
             |           |         |                         |
             | VFREEBUSY | Current | RFC 5545, Section 3.6.4 |
             |           |         |                         |
             | VTIMEZONE | Current | RFC 5545, Section 3.6.5 |
             |           |         |                         |
             | VALARM    | Current | RFC 5545, Section 3.6.6 |
             |           |         |                         |
             | STANDARD  | Current | RFC 5545, Section 3.6.5 |
             |           |         |                         |
             | DAYLIGHT  | Current | RFC 5545, Section 3.6.5 |
             +-----------+---------+-------------------------+















Desruisseaux                Standards Track                   [Page 155]

RFC 5545                       iCalendar                  September 2009


8.3.2.  Properties Registry

   The following table is has been used to initialize the properties
   registry.

      +------------------+------------+----------------------------+
      | Property         | Status     | Reference                  |
      +------------------+------------+----------------------------+
      | CALSCALE         | Current    | RFC 5545, Section 3.7.1    |
      | METHOD           | Current    | RFC 5545, Section 3.7.2    |
      |                  |            |                            |
      | PRODID           | Current    | RFC 5545, Section 3.7.3    |
      |                  |            |                            |
      | VERSION          | Current    | RFC 5545, Section 3.7.4    |
      |                  |            |                            |
      | ATTACH           | Current    | RFC 5545, Section 3.8.1.1  |
      |                  |            |                            |
      | CATEGORIES       | Current    | RFC 5545, Section 3.8.1.2  |
      |                  |            |                            |
      | CLASS            | Current    | RFC 5545, Section 3.8.1.3  |
      |                  |            |                            |
      | COMMENT          | Current    | RFC 5545, Section 3.8.1.4  |
      |                  |            |                            |
      | DESCRIPTION      | Current    | RFC 5545, Section 3.8.1.5  |
      |                  |            |                            |
      | GEO              | Current    | RFC 5545, Section 3.8.1.6  |
      |                  |            |                            |
      | LOCATION         | Current    | RFC 5545, Section 3.8.1.7  |
      |                  |            |                            |
      | PERCENT-COMPLETE | Current    | RFC 5545, Section 3.8.1.8  |
      |                  |            |                            |
      | PRIORITY         | Current    | RFC 5545, Section 3.8.1.9  |
      |                  |            |                            |
      | RESOURCES        | Current    | RFC 5545, Section 3.8.1.10 |
      |                  |            |                            |
      | STATUS           | Current    | RFC 5545, Section 3.8.1.11 |
      |                  |            |                            |
      | SUMMARY          | Current    | RFC 5545, Section 3.8.1.12 |
      |                  |            |                            |
      | COMPLETED        | Current    | RFC 5545, Section 3.8.2.1  |
      |                  |            |                            |
      | DTEND            | Current    | RFC 5545, Section 3.8.2.2  |
      |                  |            |                            |
      | DUE              | Current    | RFC 5545, Section 3.8.2.3  |
      |                  |            |                            |
      | DTSTART          | Current    | RFC 5545, Section 3.8.2.4  |
      |                  |            |                            |
      | DURATION         | Current    | RFC 5545, Section 3.8.2.5  |



Desruisseaux                Standards Track                   [Page 156]

RFC 5545                       iCalendar                  September 2009


      |                  |            |                            |
      | FREEBUSY         | Current    | RFC 5545, Section 3.8.2.6  |
      |                  |            |                            |
      | TRANSP           | Current    | RFC 5545, Section 3.8.2.7  |
      |                  |            |                            |
      | TZID             | Current    | RFC 5545, Section 3.8.3.1  |
      |                  |            |                            |
      | TZNAME           | Current    | RFC 5545, Section 3.8.3.2  |
      |                  |            |                            |
      | TZOFFSETFROM     | Current    | RFC 5545, Section 3.8.3.3  |
      |                  |            |                            |
      | TZOFFSETTO       | Current    | RFC 5545, Section 3.8.3.4  |
      |                  |            |                            |
      | TZURL            | Current    | RFC 5545, Section 3.8.3.5  |
      |                  |            |                            |
      | ATTENDEE         | Current    | RFC 5545, Section 3.8.4.1  |
      |                  |            |                            |
      | CONTACT          | Current    | RFC 5545, Section 3.8.4.2  |
      |                  |            |                            |
      | ORGANIZER        | Current    | RFC 5545, Section 3.8.4.3  |
      |                  |            |                            |
      | RECURRENCE-ID    | Current    | RFC 5545, Section 3.8.4.4  |
      |                  |            |                            |
      | RELATED-TO       | Current    | RFC 5545, Section 3.8.4.5  |
      |                  |            |                            |
      | URL              | Current    | RFC 5545, Section 3.8.4.6  |
      |                  |            |                            |
      | UID              | Current    | RFC 5545, Section 3.8.4.7  |
      |                  |            |                            |
      | EXDATE           | Current    | RFC 5545, Section 3.8.5.1  |
      |                  |            |                            |
      | EXRULE           | Deprecated | [RFC2445], Section 4.8.5.2 |
      |                  |            |                            |
      | RDATE            | Current    | RFC 5545, Section 3.8.5.2  |
      |                  |            |                            |
      | RRULE            | Current    | RFC 5545, Section 3.8.5.3  |
      |                  |            |                            |
      | ACTION           | Current    | RFC 5545, Section 3.8.6.1  |
      |                  |            |                            |
      | REPEAT           | Current    | RFC 5545, Section 3.8.6.2  |
      |                  |            |                            |
      | TRIGGER          | Current    | RFC 5545, Section 3.8.6.3  |
      |                  |            |                            |
      | CREATED          | Current    | RFC 5545, Section 3.8.7.1  |
      |                  |            |                            |
      | DTSTAMP          | Current    | RFC 5545, Section 3.8.7.2  |
      |                  |            |                            |
      | LAST-MODIFIED    | Current    | RFC 5545, Section 3.8.7.3  |



Desruisseaux                Standards Track                   [Page 157]

RFC 5545                       iCalendar                  September 2009


      |                  |            |                            |
      | SEQUENCE         | Current    | RFC 5545, Section 3.8.7.4  |
      |                  |            |                            |
      | REQUEST-STATUS   | Current    | RFC 5545, Section 3.8.8.3  |
      +------------------+------------+----------------------------+

8.3.3.  Parameters Registry

   The following table has been used to initialize the parameters
   registry.

          +----------------+---------+--------------------------+
          | Parameter      | Status  | Reference                |
          +----------------+---------+--------------------------+
          | ALTREP         | Current | RFC 5545, Section 3.2.1  |
          |                |         |                          |
          | CN             | Current | RFC 5545, Section 3.2.2  |
          |                |         |                          |
          | CUTYPE         | Current | RFC 5545, Section 3.2.3  |
          |                |         |                          |
          | DELEGATED-FROM | Current | RFC 5545, Section 3.2.4  |
          |                |         |                          |
          | DELEGATED-TO   | Current | RFC 5545, Section 3.2.5  |
          |                |         |                          |
          | DIR            | Current | RFC 5545, Section 3.2.6  |
          |                |         |                          |
          | ENCODING       | Current | RFC 5545, Section 3.2.7  |
          |                |         |                          |
          | FMTTYPE        | Current | RFC 5545, Section 3.2.8  |
          |                |         |                          |
          | FBTYPE         | Current | RFC 5545, Section 3.2.9  |
          |                |         |                          |
          | LANGUAGE       | Current | RFC 5545, Section 3.2.10 |
          |                |         |                          |
          | MEMBER         | Current | RFC 5545, Section 3.2.11 |
          |                |         |                          |
          | PARTSTAT       | Current | RFC 5545, Section 3.2.12 |
          |                |         |                          |
          | RANGE          | Current | RFC 5545, Section 3.2.13 |
          |                |         |                          |
          | RELATED        | Current | RFC 5545, Section 3.2.14 |
          |                |         |                          |
          | RELTYPE        | Current | RFC 5545, Section 3.2.15 |
          |                |         |                          |
          | ROLE           | Current | RFC 5545, Section 3.2.16 |
          |                |         |                          |
          | RSVP           | Current | RFC 5545, Section 3.2.17 |
          |                |         |                          |



Desruisseaux                Standards Track                   [Page 158]

RFC 5545                       iCalendar                  September 2009


          | SENT-BY        | Current | RFC 5545, Section 3.2.18 |
          |                |         |                          |
          | TZID           | Current | RFC 5545, Section 3.2.19 |
          |                |         |                          |
          | VALUE          | Current | RFC 5545, Section 3.2.20 |
          +----------------+---------+--------------------------+

8.3.4.  Value Data Types Registry

   The following table has been used to initialize the value data types
   registry.

         +-----------------+---------+--------------------------+
         | Value Data Type | Status  | Reference                |
         +-----------------+---------+--------------------------+
         | BINARY          | Current | RFC 5545, Section 3.3.1  |
         |                 |         |                          |
         | BOOLEAN         | Current | RFC 5545, Section 3.3.2  |
         |                 |         |                          |
         | CAL-ADDRESS     | Current | RFC 5545, Section 3.3.3  |
         |                 |         |                          |
         | DATE            | Current | RFC 5545, Section 3.3.4  |
         |                 |         |                          |
         | DATE-TIME       | Current | RFC 5545, Section 3.3.5  |
         |                 |         |                          |
         | DURATION        | Current | RFC 5545, Section 3.3.6  |
         |                 |         |                          |
         | FLOAT           | Current | RFC 5545, Section 3.3.7  |
         |                 |         |                          |
         | INTEGER         | Current | RFC 5545, Section 3.3.8  |
         |                 |         |                          |
         | PERIOD          | Current | RFC 5545, Section 3.3.9  |
         |                 |         |                          |
         | RECUR           | Current | RFC 5545, Section 3.3.10 |
         |                 |         |                          |
         | TEXT            | Current | RFC 5545, Section 3.3.11 |
         |                 |         |                          |
         | TIME            | Current | RFC 5545, Section 3.3.12 |
         |                 |         |                          |
         | URI             | Current | RFC 5545, Section 3.3.13 |
         |                 |         |                          |
         | UTC-OFFSET      | Current | RFC 5545, Section 3.3.14 |
         +-----------------+---------+--------------------------+








Desruisseaux                Standards Track                   [Page 159]

RFC 5545                       iCalendar                  September 2009


8.3.5.  Calendar User Types Registry

   The following table has been used to initialize the calendar user
   types registry.

        +--------------------+---------+-------------------------+
        | Calendar User Type | Status  | Reference               |
        +--------------------+---------+-------------------------+
        | INDIVIDUAL         | Current | RFC 5545, Section 3.2.3 |
        |                    |         |                         |
        | GROUP              | Current | RFC 5545, Section 3.2.3 |
        |                    |         |                         |
        | RESOURCE           | Current | RFC 5545, Section 3.2.3 |
        |                    |         |                         |
        | ROOM               | Current | RFC 5545, Section 3.2.3 |
        |                    |         |                         |
        | UNKNOWN            | Current | RFC 5545, Section 3.2.3 |
        +--------------------+---------+-------------------------+

8.3.6.  Free/Busy Time Types Registry

   The following table has been used to initialize the free/busy time
   types registry.

        +---------------------+---------+-------------------------+
        | Free/Busy Time Type | Status  | Reference               |
        +---------------------+---------+-------------------------+
        | FREE                | Current | RFC 5545, Section 3.2.9 |
        |                     |         |                         |
        | BUSY                | Current | RFC 5545, Section 3.2.9 |
        |                     |         |                         |
        | BUSY-UNAVAILABLE    | Current | RFC 5545, Section 3.2.9 |
        |                     |         |                         |
        | BUSY-TENTATIVE      | Current | RFC 5545, Section 3.2.9 |
        +---------------------+---------+-------------------------+
















Desruisseaux                Standards Track                   [Page 160]

RFC 5545                       iCalendar                  September 2009


8.3.7.  Participation Statuses Registry

   The following table has been used to initialize the participation
   statuses registry.

        +--------------------+---------+--------------------------+
        | Participant Status | Status  | Reference                |
        +--------------------+---------+--------------------------+
        | NEEDS-ACTION       | Current | RFC 5545, Section 3.2.12 |
        |                    |         |                          |
        | ACCEPTED           | Current | RFC 5545, Section 3.2.12 |
        |                    |         |                          |
        | DECLINED           | Current | RFC 5545, Section 3.2.12 |
        |                    |         |                          |
        | TENTATIVE          | Current | RFC 5545, Section 3.2.12 |
        |                    |         |                          |
        | DELEGATED          | Current | RFC 5545, Section 3.2.12 |
        |                    |         |                          |
        | COMPLETED          | Current | RFC 5545, Section 3.2.12 |
        |                    |         |                          |
        | IN-PROCESS         | Current | RFC 5545, Section 3.2.12 |
        +--------------------+---------+--------------------------+

8.3.8.  Relationship Types Registry

   The following table has been used to initialize the relationship
   types registry.

        +-------------------+---------+--------------------------+
        | Relationship Type | Status  | Reference                |
        +-------------------+---------+--------------------------+
        | CHILD             | Current | RFC 5545, Section 3.2.15 |
        |                   |         |                          |
        | PARENT            | Current | RFC 5545, Section 3.2.15 |
        |                   |         |                          |
        | SIBLING           | Current | RFC 5545, Section 3.2.15 |
        +-------------------+---------+--------------------------+














Desruisseaux                Standards Track                   [Page 161]

RFC 5545                       iCalendar                  September 2009


8.3.9.  Participation Roles Registry

   The following table has been used to initialize the participation
   roles registry.

         +-----------------+---------+--------------------------+
         | Role Type       | Status  | Reference                |
         +-----------------+---------+--------------------------+
         | CHAIR           | Current | RFC 5545, Section 3.2.16 |
         |                 |         |                          |
         | REQ-PARTICIPANT | Current | RFC 5545, Section 3.2.16 |
         |                 |         |                          |
         | OPT-PARTICIPANT | Current | RFC 5545, Section 3.2.16 |
         |                 |         |                          |
         | NON-PARTICIPANT | Current | RFC 5545, Section 3.2.16 |
         +-----------------+---------+--------------------------+

8.3.10.  Actions Registry

   The following table has been used to initialize the actions registry.

          +-----------+------------+----------------------------+
          | Action    | Status     | Reference                  |
          +-----------+------------+----------------------------+
          | AUDIO     | Current    | RFC 5545, Section 3.8.6.1  |
          |           |            |                            |
          | DISPLAY   | Current    | RFC 5545, Section 3.8.6.1  |
          |           |            |                            |
          | EMAIL     | Current    | RFC 5545, Section 3.8.6.1  |
          |           |            |                            |
          | PROCEDURE | Deprecated | [RFC2445], Section 4.8.6.1 |
          +-----------+------------+----------------------------+

8.3.11.  Classifications Registry

   The following table has been used to initialize the classifications
   registry.

         +----------------+---------+---------------------------+
         | Classification | Status  | Reference                 |
         +----------------+---------+---------------------------+
         | PUBLIC         | Current | RFC 5545, Section 3.8.1.3 |
         |                |         |                           |
         | PRIVATE        | Current | RFC 5545, Section 3.8.1.3 |
         |                |         |                           |
         | CONFIDENTIAL   | Current | RFC 5545, Section 3.8.1.3 |
         +----------------+---------+---------------------------+




Desruisseaux                Standards Track                   [Page 162]

RFC 5545                       iCalendar                  September 2009


8.3.12.  Methods Registry

   No values are defined in this document for the "METHOD" property.

9.  Acknowledgments

   The editor of this document wishes to thank Frank Dawson and Derik
   Stenerson, the original authors of RFC 2445, as well as the following
   individuals who have participated in the drafting, review, and
   discussion of this memo:

   Joe Abley, Hervey Allen, Steve Allen, Jay Batson, Oliver Block,
   Stephane Bortzmeyer, Chris Bryant, Tantek Celik, Mark Crispin, Cyrus
   Daboo, Mike Douglass, Andrew N. Dowden, Lisa Dusseault, Lars Eggert,
   Gren Eliot, Pasi Eronen, Ben Fortuna, Ned Freed, Neal Gafter, Ted
   Hardie, Tim Hare, Jeffrey Harris, Helge Hess, Paul B. Hill, Thomas
   Hnetila, Russ Housley, Leif Johansson, Ciny Joy, Bruce Kahn, Reinhold
   Kainhofer, Martin Kiff, Patrice Lapierre, Michiel van Leeuwen,
   Jonathan Lennox, Jeff McCullough, Bill McQuillan, Alexey Melnikov,
   John W. Noerenberg II, Chuck Norris, Mark Paterson, Simon Pilette,
   Arnaud Quillaud, Robert Ransdell, Julian F. Reschke, Caleb
   Richardson, Sam Roberts, Dan Romascanu, Mike Samuel, George Sexton,
   Nigel Swinson, Clint Talbert, Simon Vaillancourt, Magnus Westerlund,
   and Sandy Wills.

   A special thanks to the working group chairs Aki Niemi and Eliot Lear
   for their support and guidance.

   The editor would also like to thank the Calendaring and Scheduling
   Consortium for advice with this specification, and for organizing
   interoperability testing events to help refine it.




















Desruisseaux                Standards Track                   [Page 163]

RFC 5545                       iCalendar                  September 2009


10.  References

10.1.  Normative References

   [ISO.8601.2004]        International Organization for
                          Standardization, "Data elements and
                          interchange formats -- Information interchange
                          -- Representation of dates and times", 2004.

   [ISO.9070.1991]        International Organization for
                          Standardization, "Information Technology_SGML
                          Support Facilities -- Registration Procedures
                          for Public Text Owner Identifiers, Second
                          Edition", April 1991.

   [RFC2045]              Freed, N. and N. Borenstein, "Multipurpose
                          Internet Mail Extensions (MIME) Part One:
                          Format of Internet Message Bodies", RFC 2045,
                          November 1996.

   [RFC2046]              Freed, N. and N. Borenstein, "Multipurpose
                          Internet Mail Extensions (MIME) Part Two:
                          Media Types", RFC 2046, November 1996.

   [RFC2119]              Bradner, S., "Key words for use in RFCs to
                          Indicate Requirement Levels", BCP 14,
                          RFC 2119, March 1997.

   [RFC2368]              Hoffman, P., Masinter, L., and J. Zawinski,
                          "The mailto URL scheme", RFC 2368, July 1998.

   [RFC3629]              Yergeau, F., "UTF-8, a transformation format
                          of ISO 10646", STD 63, RFC 3629,
                          November 2003.

   [RFC3986]              Berners-Lee, T., Fielding, R., and L.
                          Masinter, "Uniform Resource Identifier (URI):
                          Generic Syntax", STD 66, RFC 3986,
                          January 2005.

   [RFC4288]              Freed, N. and J. Klensin, "Media Type
                          Specifications and Registration Procedures",
                          BCP 13, RFC 4288, December 2005.

   [RFC4648]              Josefsson, S., "The Base16, Base32, and Base64
                          Data Encodings", RFC 4648, October 2006.





Desruisseaux                Standards Track                   [Page 164]

RFC 5545                       iCalendar                  September 2009


   [RFC5234]              Crocker, D. and P. Overell, "Augmented BNF for
                          Syntax Specifications: ABNF", STD 68,
                          RFC 5234, January 2008.

   [RFC5646]              Phillips, A., Ed., and M. Davis, Ed., "Tags
                          for Identifying Languages", BCP 47, RFC 5646,
                          September 2009.

   [US-ASCII]             American National Standards Institute, "Coded
                          Character Set - 7-bit American Standard Code
                          for Information Interchange", ANSI X3.4, 1986.

10.2.  Informative References

   [2446bis]              Daboo, C., "iCalendar Transport-Independent
                          Interoperability Protocol (iTIP)", Work
                          in Progress, April 2009.

   [2447bis]              Melnikov, A., "iCalendar Message-Based
                          Interoperability Protocol (iMIP)", Work
                          in Progress, June 2008.

   [ANSI INCITS 61-1986]  International Committee for Information
                          Technology, "Representation of Geographic
                          Point Locations for Information Interchange
                          (formerly ANSI X3.61-1986 (R1997))", ANSI
                          INCITS 61-1986 (R2007), 2007.

   [RFC1738]              Berners-Lee, T., Masinter, L., and M.
                          McCahill, "Uniform Resource Locators (URL)",
                          RFC 1738, December 1994.

   [RFC2392]              Levinson, E., "Content-ID and Message-ID
                          Uniform Resource Locators", RFC 2392,
                          August 1998.

   [RFC2397]              Masinter, L., "The "data" URL scheme",
                          RFC 2397, August 1998.

   [RFC2425]              Howes, T., Smith, M., and F. Dawson, "A MIME
                          Content-Type for Directory Information",
                          RFC 2425, September 1998.

   [RFC2426]              Dawson, F. and T. Howes, "vCard MIME Directory
                          Profile", RFC 2426, September 1998.






Desruisseaux                Standards Track                   [Page 165]

RFC 5545                       iCalendar                  September 2009


   [RFC2445]              Dawson, F. and Stenerson, D., "Internet
                          Calendaring and Scheduling Core Object
                          Specification (iCalendar)", RFC 2445,
                          November 1998.

   [RFC2616]              Fielding, R., Gettys, J., Mogul, J., Frystyk,
                          H., Masinter, L., Leach, P., and T. Berners-
                          Lee, "Hypertext Transfer Protocol --
                          HTTP/1.1", RFC 2616, June 1999.

   [RFC2818]              Rescorla, E., "HTTP Over TLS", RFC 2818,
                          May 2000.

   [RFC4516]              Smith, M. and T. Howes, "Lightweight Directory
                          Access Protocol (LDAP): Uniform Resource
                          Locator", RFC 4516, June 2006.

   [RFC4791]              Daboo, C., Desruisseaux, B., and L. Dusseault,
                          "Calendaring Extensions to WebDAV (CalDAV)",
                          RFC 4791, March 2007.

   [TZDB]                 Eggert, P. and A.D. Olson, "Sources for Time
                          Zone and Daylight Saving Time Data",
                          July 2009,
                          <http://www.twinsun.com/tz/tz-link.htm>.

   [VCAL]                 Internet Mail Consortium, "vCalendar: The
                          Electronic Calendaring and Scheduling Exchange
                          Format", September 1996,
                          <http://www.imc.org/pdi/vcal-10.txt>.





















Desruisseaux                Standards Track                   [Page 166]

RFC 5545                       iCalendar                  September 2009


Appendix A.  Differences from RFC 2445

   This appendix contains a list of changes that have been made in the
   Internet Calendaring and Scheduling Core Object Specification from
   RFC 2445.

A.1.  New Restrictions

   1.  The "DTSTART" property SHOULD be synchronized with the recurrence
       rule, if specified.

   2.  The "RRULE" property SHOULD NOT occur more than once in a
       component.

   3.  The BYHOUR, BYMINUTE, and BYSECOND rule parts MUST NOT be
       specified in the "RRULE" property when the "DTSTART" property is
       specified as a DATE value.

   4.  The value type of the "DTEND" or "DUE" properties MUST match the
       value type of "DTSTART" property.

   5.  The "DURATION" property can no longer appear in "VFREEBUSY"
       components.

A.2.  Restrictions Removed

   1.  The "DTSTART" and "DTEND" properties are no longer required to be
       specified as date with local time and time zone reference when
       used with a recurrence rule.

A.3.  Deprecated Features

   1.  The "EXRULE" property can no longer be specified in a component.

   2.  The "THISANDPRIOR" value can no longer be used with the "RANGE"
       parameter.

   3.  The "PROCEDURE" value can no longer be used with the "ACTION"
       property.

   4.  The value type RECUR no longer allows multiple values to be
       specified by a COMMA-separated list of values.

   5.  x-name rule parts can no longer be specified in properties of
       RECUR value type (e.g., "RRULE"). x-param can be used on RECUR
       value type properties instead.





Desruisseaux                Standards Track                   [Page 167]

RFC 5545                       iCalendar                  September 2009


Author's Address

   Bernard Desruisseaux (editor)
   Oracle Corporation
   600 blvd. de Maisonneuve West
   Suite 1900
   Montreal, QC  H3A 3J2
   CANADA

   EMail: bernard.desruisseaux@oracle.com
   URI:   http://www.oracle.com/








































Desruisseaux                Standards Track                   [Page 168]