diff options
Diffstat (limited to 'library/htmlpurifier-4.6.0-lite/INSTALL')
| -rw-r--r-- | library/htmlpurifier-4.6.0-lite/INSTALL | 374 |
1 files changed, 0 insertions, 374 deletions
diff --git a/library/htmlpurifier-4.6.0-lite/INSTALL b/library/htmlpurifier-4.6.0-lite/INSTALL deleted file mode 100644 index 677c04aa0..000000000 --- a/library/htmlpurifier-4.6.0-lite/INSTALL +++ /dev/null @@ -1,374 +0,0 @@ - -Install - How to install HTML Purifier - -HTML Purifier is designed to run out of the box, so actually using the -library is extremely easy. (Although... if you were looking for a -step-by-step installation GUI, you've downloaded the wrong software!) - -While the impatient can get going immediately with some of the sample -code at the bottom of this library, it's well worth reading this entire -document--most of the other documentation assumes that you are familiar -with these contents. - - ---------------------------------------------------------------------------- -1. Compatibility - -HTML Purifier is PHP 5 only, and is actively tested from PHP 5.0.5 and -up. It has no core dependencies with other libraries. PHP -4 support was deprecated on December 31, 2007 with HTML Purifier 3.0.0. -HTML Purifier is not compatible with zend.ze1_compatibility_mode. - -These optional extensions can enhance the capabilities of HTML Purifier: - - * iconv : Converts text to and from non-UTF-8 encodings - * bcmath : Used for unit conversion and imagecrash protection - * tidy : Used for pretty-printing HTML - -These optional libraries can enhance the capabilities of HTML Purifier: - - * CSSTidy : Clean CSS stylesheets using %Core.ExtractStyleBlocks - * Net_IDNA2 (PEAR) : IRI support using %Core.EnableIDNA - ---------------------------------------------------------------------------- -2. Reconnaissance - -A big plus of HTML Purifier is its inerrant support of standards, so -your web-pages should be standards-compliant. (They should also use -semantic markup, but that's another issue altogether, one HTML Purifier -cannot fix without reading your mind.) - -HTML Purifier can process these doctypes: - -* XHTML 1.0 Transitional (default) -* XHTML 1.0 Strict -* HTML 4.01 Transitional -* HTML 4.01 Strict -* XHTML 1.1 - -...and these character encodings: - -* UTF-8 (default) -* Any encoding iconv supports (with crippled internationalization support) - -These defaults reflect what my choices would be if I were authoring an -HTML document, however, what you choose depends on the nature of your -codebase. If you don't know what doctype you are using, you can determine -the doctype from this identifier at the top of your source code: - - <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" - "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> - -...and the character encoding from this code: - - <meta http-equiv="Content-type" content="text/html;charset=ENCODING"> - -If the character encoding declaration is missing, STOP NOW, and -read 'docs/enduser-utf8.html' (web accessible at -http://htmlpurifier.org/docs/enduser-utf8.html). In fact, even if it is -present, read this document anyway, as many websites specify their -document's character encoding incorrectly. - - ---------------------------------------------------------------------------- -3. Including the library - -The procedure is quite simple: - - require_once '/path/to/library/HTMLPurifier.auto.php'; - -This will setup an autoloader, so the library's files are only included -when you use them. - -Only the contents in the library/ folder are necessary, so you can remove -everything else when using HTML Purifier in a production environment. - -If you installed HTML Purifier via PEAR, all you need to do is: - - require_once 'HTMLPurifier.auto.php'; - -Please note that the usual PEAR practice of including just the classes you -want will not work with HTML Purifier's autoloading scheme. - -Advanced users, read on; other users can skip to section 4. - -Autoload compatibility ----------------------- - - HTML Purifier attempts to be as smart as possible when registering an - autoloader, but there are some cases where you will need to change - your own code to accomodate HTML Purifier. These are those cases: - - PHP VERSION IS LESS THAN 5.1.2, AND YOU'VE DEFINED __autoload - Because spl_autoload_register() doesn't exist in early versions - of PHP 5, HTML Purifier has no way of adding itself to the autoload - stack. Modify your __autoload function to test - HTMLPurifier_Bootstrap::autoload($class) - - For example, suppose your autoload function looks like this: - - function __autoload($class) { - require str_replace('_', '/', $class) . '.php'; - return true; - } - - A modified version with HTML Purifier would look like this: - - function __autoload($class) { - if (HTMLPurifier_Bootstrap::autoload($class)) return true; - require str_replace('_', '/', $class) . '.php'; - return true; - } - - Note that there *is* some custom behavior in our autoloader; the - original autoloader in our example would work for 99% of the time, - but would fail when including language files. - - AN __autoload FUNCTION IS DECLARED AFTER OUR AUTOLOADER IS REGISTERED - spl_autoload_register() has the curious behavior of disabling - the existing __autoload() handler. Users need to explicitly - spl_autoload_register('__autoload'). Because we use SPL when it - is available, __autoload() will ALWAYS be disabled. If __autoload() - is declared before HTML Purifier is loaded, this is not a problem: - HTML Purifier will register the function for you. But if it is - declared afterwards, it will mysteriously not work. This - snippet of code (after your autoloader is defined) will fix it: - - spl_autoload_register('__autoload') - - Users should also be on guard if they use a version of PHP previous - to 5.1.2 without an autoloader--HTML Purifier will define __autoload() - for you, which can collide with an autoloader that was added by *you* - later. - - -For better performance ----------------------- - - Opcode caches, which greatly speed up PHP initialization for scripts - with large amounts of code (HTML Purifier included), don't like - autoloaders. We offer an include file that includes all of HTML Purifier's - files in one go in an opcode cache friendly manner: - - // If /path/to/library isn't already in your include path, uncomment - // the below line: - // require '/path/to/library/HTMLPurifier.path.php'; - - require 'HTMLPurifier.includes.php'; - - Optional components still need to be included--you'll know if you try to - use a feature and you get a class doesn't exists error! The autoloader - can be used in conjunction with this approach to catch classes that are - missing. Simply add this afterwards: - - require 'HTMLPurifier.autoload.php'; - -Standalone version ------------------- - - HTML Purifier has a standalone distribution; you can also generate - a standalone file from the full version by running the script - maintenance/generate-standalone.php . The standalone version has the - benefit of having most of its code in one file, so parsing is much - faster and the library is easier to manage. - - If HTMLPurifier.standalone.php exists in the library directory, you - can use it like this: - - require '/path/to/HTMLPurifier.standalone.php'; - - This is equivalent to including HTMLPurifier.includes.php, except that - the contents of standalone/ will be added to your path. To override this - behavior, specify a new HTMLPURIFIER_PREFIX where standalone files can - be found (usually, this will be one directory up, the "true" library - directory in full distributions). Don't forget to set your path too! - - The autoloader can be added to the end to ensure the classes are - loaded when necessary; otherwise you can manually include them. - To use the autoloader, use this: - - require 'HTMLPurifier.autoload.php'; - -For advanced users ------------------- - - HTMLPurifier.auto.php performs a number of operations that can be done - individually. These are: - - HTMLPurifier.path.php - Puts /path/to/library in the include path. For high performance, - this should be done in php.ini. - - HTMLPurifier.autoload.php - Registers our autoload handler HTMLPurifier_Bootstrap::autoload($class). - - You can do these operations by yourself--in fact, you must modify your own - autoload handler if you are using a version of PHP earlier than PHP 5.1.2 - (See "Autoload compatibility" above). - - ---------------------------------------------------------------------------- -4. Configuration - -HTML Purifier is designed to run out-of-the-box, but occasionally HTML -Purifier needs to be told what to do. If you answer no to any of these -questions, read on; otherwise, you can skip to the next section (or, if you're -into configuring things just for the heck of it, skip to 4.3). - -* Am I using UTF-8? -* Am I using XHTML 1.0 Transitional? - -If you answered no to any of these questions, instantiate a configuration -object and read on: - - $config = HTMLPurifier_Config::createDefault(); - - -4.1. Setting a different character encoding - -You really shouldn't use any other encoding except UTF-8, especially if you -plan to support multilingual websites (read section three for more details). -However, switching to UTF-8 is not always immediately feasible, so we can -adapt. - -HTML Purifier uses iconv to support other character encodings, as such, -any encoding that iconv supports <http://www.gnu.org/software/libiconv/> -HTML Purifier supports with this code: - - $config->set('Core.Encoding', /* put your encoding here */); - -An example usage for Latin-1 websites (the most common encoding for English -websites): - - $config->set('Core.Encoding', 'ISO-8859-1'); - -Note that HTML Purifier's support for non-Unicode encodings is crippled by the -fact that any character not supported by that encoding will be silently -dropped, EVEN if it is ampersand escaped. If you want to work around -this, you are welcome to read docs/enduser-utf8.html for a fix, -but please be cognizant of the issues the "solution" creates (for this -reason, I do not include the solution in this document). - - -4.2. Setting a different doctype - -For those of you using HTML 4.01 Transitional, you can disable -XHTML output like this: - - $config->set('HTML.Doctype', 'HTML 4.01 Transitional'); - -Other supported doctypes include: - - * HTML 4.01 Strict - * HTML 4.01 Transitional - * XHTML 1.0 Strict - * XHTML 1.0 Transitional - * XHTML 1.1 - - -4.3. Other settings - -There are more configuration directives which can be read about -here: <http://htmlpurifier.org/live/configdoc/plain.html> They're a bit boring, -but they can help out for those of you who like to exert maximum control over -your code. Some of the more interesting ones are configurable at the -demo <http://htmlpurifier.org/demo.php> and are well worth looking into -for your own system. - -For example, you can fine tune allowed elements and attributes, convert -relative URLs to absolute ones, and even autoparagraph input text! These -are, respectively, %HTML.Allowed, %URI.MakeAbsolute and %URI.Base, and -%AutoFormat.AutoParagraph. The %Namespace.Directive naming convention -translates to: - - $config->set('Namespace.Directive', $value); - -E.g. - - $config->set('HTML.Allowed', 'p,b,a[href],i'); - $config->set('URI.Base', 'http://www.example.com'); - $config->set('URI.MakeAbsolute', true); - $config->set('AutoFormat.AutoParagraph', true); - - ---------------------------------------------------------------------------- -5. Caching - -HTML Purifier generates some cache files (generally one or two) to speed up -its execution. For maximum performance, make sure that -library/HTMLPurifier/DefinitionCache/Serializer is writeable by the webserver. - -If you are in the library/ folder of HTML Purifier, you can set the -appropriate permissions using: - - chmod -R 0755 HTMLPurifier/DefinitionCache/Serializer - -If the above command doesn't work, you may need to assign write permissions -to all. This may be necessary if your webserver runs as nobody, but is -not recommended since it means any other user can write files in the -directory. Use: - - chmod -R 0777 HTMLPurifier/DefinitionCache/Serializer - -You can also chmod files via your FTP client; this option -is usually accessible by right clicking the corresponding directory and -then selecting "chmod" or "file permissions". - -Starting with 2.0.1, HTML Purifier will generate friendly error messages -that will tell you exactly what you have to chmod the directory to, if in doubt, -follow its advice. - -If you are unable or unwilling to give write permissions to the cache -directory, you can either disable the cache (and suffer a performance -hit): - - $config->set('Core.DefinitionCache', null); - -Or move the cache directory somewhere else (no trailing slash): - - $config->set('Cache.SerializerPath', '/home/user/absolute/path'); - - ---------------------------------------------------------------------------- -6. Using the code - -The interface is mind-numbingly simple: - - $purifier = new HTMLPurifier($config); - $clean_html = $purifier->purify( $dirty_html ); - -That's it! For more examples, check out docs/examples/ (they aren't very -different though). Also, docs/enduser-slow.html gives advice on what to -do if HTML Purifier is slowing down your application. - - ---------------------------------------------------------------------------- -7. Quick install - -First, make sure library/HTMLPurifier/DefinitionCache/Serializer is -writable by the webserver (see Section 5: Caching above for details). -If your website is in UTF-8 and XHTML Transitional, use this code: - -<?php - require_once '/path/to/htmlpurifier/library/HTMLPurifier.auto.php'; - - $config = HTMLPurifier_Config::createDefault(); - $purifier = new HTMLPurifier($config); - $clean_html = $purifier->purify($dirty_html); -?> - -If your website is in a different encoding or doctype, use this code: - -<?php - require_once '/path/to/htmlpurifier/library/HTMLPurifier.auto.php'; - - $config = HTMLPurifier_Config::createDefault(); - $config->set('Core.Encoding', 'ISO-8859-1'); // replace with your encoding - $config->set('HTML.Doctype', 'HTML 4.01 Transitional'); // replace with your doctype - $purifier = new HTMLPurifier($config); - - $clean_html = $purifier->purify($dirty_html); -?> - - vim: et sw=4 sts=4 |