aboutsummaryrefslogtreecommitdiffstats
path: root/vendor/sabre/dav/docs/rfc4790.txt
diff options
context:
space:
mode:
authorfriendica <info@friendica.com>2013-10-21 15:46:31 -0700
committerfriendica <info@friendica.com>2013-10-21 15:46:31 -0700
commitb35122f7a6ad42756c35bb60ba1f06c3dcd45c77 (patch)
treeccdf373ce6475d264778523259cc32899b732fe7 /vendor/sabre/dav/docs/rfc4790.txt
parente3504df514d306cfe6b83e44a11f550664564af4 (diff)
downloadvolse-hubzilla-b35122f7a6ad42756c35bb60ba1f06c3dcd45c77.tar.gz
volse-hubzilla-b35122f7a6ad42756c35bb60ba1f06c3dcd45c77.tar.bz2
volse-hubzilla-b35122f7a6ad42756c35bb60ba1f06c3dcd45c77.zip
add sabre (1.8.x) via composer in the !@#$ place it wants to be
Diffstat (limited to 'vendor/sabre/dav/docs/rfc4790.txt')
-rw-r--r--vendor/sabre/dav/docs/rfc4790.txt1459
1 files changed, 1459 insertions, 0 deletions
diff --git a/vendor/sabre/dav/docs/rfc4790.txt b/vendor/sabre/dav/docs/rfc4790.txt
new file mode 100644
index 000000000..d58191c09
--- /dev/null
+++ b/vendor/sabre/dav/docs/rfc4790.txt
@@ -0,0 +1,1459 @@
+
+
+
+
+
+
+Network Working Group C. Newman
+Request for Comments: 4790 Sun Microsystems
+Category: Standards Track M. Duerst
+ Aoyama Gakuin University
+ A. Gulbrandsen
+ Oryx
+ March 2007
+
+
+ Internet Application Protocol Collation Registry
+
+Status of This Memo
+
+ This document specifies an Internet standards track protocol for the
+ Internet community, and requests discussion and suggestions for
+ improvements. Please refer to the current edition of the "Internet
+ Official Protocol Standards" (STD 1) for the standardization state
+ and status of this protocol. Distribution of this memo is unlimited.
+
+Copyright Notice
+
+ Copyright (C) The IETF Trust (2007).
+
+Abstract
+
+ Many Internet application protocols include string-based lookup,
+ searching, or sorting operations. However, the problem space for
+ searching and sorting international strings is large, not fully
+ explored, and is outside the area of expertise for the Internet
+ Engineering Task Force (IETF). Rather than attempt to solve such a
+ large problem, this specification creates an abstraction framework so
+ that application protocols can precisely identify a comparison
+ function, and the repertoire of comparison functions can be extended
+ in the future.
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+Newman, et al. Standards Track [Page 1]
+
+RFC 4790 Collation Registry March 2007
+
+
+Table of Contents
+
+ 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 4
+ 1.1. Conventions Used in This Document . . . . . . . . . . . . 4
+ 2. Collation Definition and Purpose . . . . . . . . . . . . . . . 4
+ 2.1. Definition . . . . . . . . . . . . . . . . . . . . . . . . 4
+ 2.2. Purpose . . . . . . . . . . . . . . . . . . . . . . . . . 4
+ 2.3. Some Other Terms Used in this Document . . . . . . . . . . 5
+ 2.4. Sort Keys . . . . . . . . . . . . . . . . . . . . . . . . 5
+ 3. Collation Identifier Syntax . . . . . . . . . . . . . . . . . 6
+ 3.1. Basic Syntax . . . . . . . . . . . . . . . . . . . . . . . 6
+ 3.2. Wildcards . . . . . . . . . . . . . . . . . . . . . . . . 6
+ 3.3. Ordering Direction . . . . . . . . . . . . . . . . . . . . 7
+ 3.4. URIs . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
+ 3.5. Naming Guidelines . . . . . . . . . . . . . . . . . . . . 7
+ 4. Collation Specification Requirements . . . . . . . . . . . . . 8
+ 4.1. Collation/Server Interface . . . . . . . . . . . . . . . . 8
+ 4.2. Operations Supported . . . . . . . . . . . . . . . . . . . 8
+ 4.2.1. Validity . . . . . . . . . . . . . . . . . . . . . . . 9
+ 4.2.2. Equality . . . . . . . . . . . . . . . . . . . . . . . 9
+ 4.2.3. Substring . . . . . . . . . . . . . . . . . . . . . . 9
+ 4.2.4. Ordering . . . . . . . . . . . . . . . . . . . . . . . 10
+ 4.3. Sort Keys . . . . . . . . . . . . . . . . . . . . . . . . 10
+ 4.4. Use of Lookup Tables . . . . . . . . . . . . . . . . . . . 11
+ 5. Application Protocol Requirements . . . . . . . . . . . . . . 11
+ 5.1. Character Encoding . . . . . . . . . . . . . . . . . . . . 11
+ 5.2. Operations . . . . . . . . . . . . . . . . . . . . . . . . 11
+ 5.3. Wildcards . . . . . . . . . . . . . . . . . . . . . . . . 12
+ 5.4. String Comparison . . . . . . . . . . . . . . . . . . . . 12
+ 5.5. Disconnected Clients . . . . . . . . . . . . . . . . . . . 12
+ 5.6. Error Codes . . . . . . . . . . . . . . . . . . . . . . . 13
+ 5.7. Octet Collation . . . . . . . . . . . . . . . . . . . . . 13
+ 6. Use by Existing Protocols . . . . . . . . . . . . . . . . . . 13
+ 7. Collation Registration . . . . . . . . . . . . . . . . . . . . 14
+ 7.1. Collation Registration Procedure . . . . . . . . . . . . . 14
+ 7.2. Collation Registration Format . . . . . . . . . . . . . . 15
+ 7.2.1. Registration Template . . . . . . . . . . . . . . . . 15
+ 7.2.2. The Collation Element . . . . . . . . . . . . . . . . 15
+ 7.2.3. The Identifier Element . . . . . . . . . . . . . . . . 16
+ 7.2.4. The Title Element . . . . . . . . . . . . . . . . . . 16
+ 7.2.5. The Operations Element . . . . . . . . . . . . . . . . 16
+ 7.2.6. The Specification Element . . . . . . . . . . . . . . 16
+ 7.2.7. The Submitter Element . . . . . . . . . . . . . . . . 16
+ 7.2.8. The Owner Element . . . . . . . . . . . . . . . . . . 16
+ 7.2.9. The Version Element . . . . . . . . . . . . . . . . . 17
+ 7.2.10. The Variable Element . . . . . . . . . . . . . . . . . 17
+ 7.3. Structure of Collation Registry . . . . . . . . . . . . . 17
+ 7.4. Example Initial Registry Summary . . . . . . . . . . . . . 18
+
+
+
+Newman, et al. Standards Track [Page 2]
+
+RFC 4790 Collation Registry March 2007
+
+
+ 8. Guidelines for Expert Reviewer . . . . . . . . . . . . . . . . 18
+ 9. Initial Collations . . . . . . . . . . . . . . . . . . . . . . 19
+ 9.1. ASCII Numeric Collation . . . . . . . . . . . . . . . . . 20
+ 9.1.1. ASCII Numeric Collation Description . . . . . . . . . 20
+ 9.1.2. ASCII Numeric Collation Registration . . . . . . . . . 20
+ 9.2. ASCII Casemap Collation . . . . . . . . . . . . . . . . . 21
+ 9.2.1. ASCII Casemap Collation Description . . . . . . . . . 21
+ 9.2.2. ASCII Casemap Collation Registration . . . . . . . . . 22
+ 9.3. Octet Collation . . . . . . . . . . . . . . . . . . . . . 22
+ 9.3.1. Octet Collation Description . . . . . . . . . . . . . 22
+ 9.3.2. Octet Collation Registration . . . . . . . . . . . . . 23
+ 10. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 23
+ 11. Security Considerations . . . . . . . . . . . . . . . . . . . 23
+ 12. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . 23
+ 13. References . . . . . . . . . . . . . . . . . . . . . . . . . . 24
+ 13.1. Normative References . . . . . . . . . . . . . . . . . . . 24
+ 13.2. Informative References . . . . . . . . . . . . . . . . . . 24
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+Newman, et al. Standards Track [Page 3]
+
+RFC 4790 Collation Registry March 2007
+
+
+1. Introduction
+
+ The Application Configuration Access Protocol ACAP [11] specification
+ introduced the concept of a comparator (which we call collation in
+ this document), but failed to create an IANA registry. With the
+ introduction of stringprep [6] and the Unicode Collation Algorithm
+ [7], it is now time to create that registry and populate it with some
+ initial values appropriate for an international community. This
+ specification replaces and generalizes the definition of a comparator
+ in ACAP, and creates a collation registry.
+
+1.1. Conventions Used in This Document
+
+ The key words "MUST", "MUST NOT", "SHOULD", "SHOULD NOT", and "MAY"
+ in this document are to be interpreted as defined in "Key words for
+ use in RFCs to Indicate Requirement Levels" [1].
+
+ The attribute syntax specifications use the Augmented Backus-Naur
+ Form (ABNF) [2] notation, including the core rules defined in
+ Appendix A. The ABNF production "Language-tag" is imported from
+ Language Tags [5] and "reg-name" from URI: Generic Syntax [4].
+
+2. Collation Definition and Purpose
+
+2.1. Definition
+
+ A collation is a named function which takes two arbitrary length
+ strings as input and can be used to perform one or more of three
+ basic comparison operations: equality test, substring match, and
+ ordering test.
+
+2.2. Purpose
+
+ Collations are an abstraction for comparison functions so that these
+ comparison functions can be used in multiple protocols. The details
+ of a particular comparison operation can be specified by someone with
+ appropriate expertise, independent of the application protocols that
+ use that collation. This is similar to the way a charset [13]
+ separates the details of octet to character mapping from a protocol
+ specification, such as MIME [9], or the way SASL [10] separates the
+ details of an authentication mechanism from a protocol specification,
+ such as ACAP [11].
+
+
+
+
+
+
+
+
+
+Newman, et al. Standards Track [Page 4]
+
+RFC 4790 Collation Registry March 2007
+
+
+ Here is a small diagram to help illustrate the value of this
+ abstraction:
+
+ +-------------------+ +-----------------+
+ | IMAP i18n SEARCH |--+ | Basic |
+ +-------------------+ | +--| Collation Spec |
+ | | +-----------------+
+ +-------------------+ | +-------------+ | +-----------------+
+ | ACAP i18n SEARCH |--+--| Collation |--+--| A stringprep |
+ +-------------------+ | | Registry | | | Collation Spec |
+ | +-------------+ | +-----------------+
+ +-------------------+ | | +-----------------+
+ | ...other protocol |--+ | | locale-specific |
+ +-------------------+ +--| Collation Spec |
+ +-----------------+
+
+ Thus IMAP, ACAP, and future application protocols with international
+ search capability simply specify how to interface to the collation
+ registry instead of each protocol specification having to specify all
+ the collations it supports.
+
+2.3. Some Other Terms Used in this Document
+
+ The terms client, server, and protocol are used in somewhat unusual
+ senses.
+
+ Client means a user, or a program acting directly on behalf of a
+ user. This may be a mail reader acting as an IMAP client, or it may
+ be an interactive shell, where the user can type protocol commands/
+ requests directly, or it may be a script or program written by the
+ user.
+
+ Server means a program that performs services requested by the
+ client. This may be a traditional server such as an HTTP server, or
+ it may be a Sieve [14] interpreter running a Sieve script written by
+ a user. A server needs to use the operations provided by collations
+ in order to fulfill the client's requests.
+
+ The protocol describes how the client tells the server what it wants
+ done, and (if applicable) how the server tells the client about the
+ results. IMAP is a protocol by this definition, and so is the Sieve
+ language.
+
+2.4. Sort Keys
+
+ One component of a collation is a transformation, which turns a
+ string into a sort key, which is then used while sorting.
+
+
+
+
+Newman, et al. Standards Track [Page 5]
+
+RFC 4790 Collation Registry March 2007
+
+
+ The transformation can range from an identity mapping (e.g., the
+ i;octet collation Section 9.3) to a mapping that makes the string
+ unreadable to a human.
+
+ This is an implementation detail of collations or servers. A
+ protocol SHOULD NOT expose it to clients, since some collations leave
+ the sort key's format up to the implementation, and current
+ conformant implementations are known to use different formats.
+
+3. Collation Identifier Syntax
+
+3.1. Basic Syntax
+
+ The collation identifier itself is a single US-ASCII string. The
+ identifier MUST NOT be longer than 254 characters, and obeys the
+ following grammar:
+
+ collation-char = ALPHA / DIGIT / "-" / ";" / "=" / "."
+
+ collation-id = collation-prefix ";" collation-core-name
+ *collation-arg
+
+ collation-scope = Language-tag / "vnd-" reg-name
+
+ collation-core-name = ALPHA *( ALPHA / DIGIT / "-" )
+
+ collation-arg = ";" ALPHA *( ALPHA / DIGIT ) "="
+ 1*( ALPHA / DIGIT / "." )
+
+
+ Note: the ABNF production "Language-tag" is imported from Language
+ Tags [5] and "reg-name" from URI: Generic Syntax [4].
+
+ There is a special identifier called "default". For protocols that
+ have a default collation, "default" refers to that collation. For
+ other protocols, the identifier "default" MUST match no collations,
+ and servers SHOULD treat it in the same way as they treat nonexistent
+ collations.
+
+3.2. Wildcards
+
+ The string a client uses to select a collation MAY contain one or
+ more wildcard ("*") characters that match zero or more collation-
+ chars. Wildcard characters MUST NOT be adjacent. If the wildcard
+ string matches multiple collations, the server SHOULD attempt to
+ select a widely useful collation in preference to a narrowly useful
+ one.
+
+
+
+
+Newman, et al. Standards Track [Page 6]
+
+RFC 4790 Collation Registry March 2007
+
+
+ collation-wild = ("*" / (ALPHA ["*"])) *(collation-char ["*"])
+ ; MUST NOT exceed 254 characters total
+
+3.3. Ordering Direction
+
+ When used as a protocol element for ordering, the collation
+ identifier MAY be prefixed by either "+" or "-" to explicitly specify
+ an ordering direction. "+" has no effect on the ordering operation,
+ while "-" inverts the result of the ordering operation. In general,
+ collation-order is used when a client requests a collation, and
+ collation-selected is used when the server informs the client of the
+ selected collation.
+
+ collation-selected = ["+" / "-"] collation-id
+
+ collation-order = ["+" / "-"] collation-wild
+
+3.4. URIs
+
+ Some protocols are designed to use URIs [4] to refer to collations
+ rather than simple tokens. A special section of the IANA URL space
+ is reserved for such usage. The "collation-uri" form is used to
+ refer to a specific named collation (the collation registration may
+ not actually be present). The "collation-auri" form is an abstract
+ name for an ordering, a collation pattern or a vendor private
+ collator.
+
+ collation-uri = "http://www.iana.org/assignments/collation/"
+ collation-id ".xml"
+
+ collation-auri = ( "http://www.iana.org/assignments/collation/"
+ collation-order ".xml" ) / other-uri
+
+ other-uri = <absoluteURI>
+ ; excluding the IANA collation namespace.
+
+3.5. Naming Guidelines
+
+ While this specification makes no absolute requirements on the
+ structure of collation identifiers, naming consistency is important,
+ so the following initial guidelines are provided.
+
+ Collation identifiers with an international audience typically begin
+ with "i;". Collation identifiers intended for a particular language
+ or locale typically begin with a language tag [5] followed by a ";".
+ After the first ";" is normally the name of the general collation
+ algorithm, followed by a series of algorithm modifications separated
+ by the ";" delimiter. Parameterized modifications will use "=" to
+
+
+
+Newman, et al. Standards Track [Page 7]
+
+RFC 4790 Collation Registry March 2007
+
+
+ delimit the parameter from the value. The version numbers of any
+ lookup tables used by the algorithm SHOULD be present as
+ parameterized modifications.
+
+ Collation identifiers of the form *;vnd-hostname;* are reserved for
+ vendor-specific collations created by the owner of the hostname
+ following the "vnd-" prefix (e.g., vnd-example.com for the vendor
+ example.com). Registration of such collations (or the name space as
+ a whole), with intended use of the "Vendor", is encouraged when a
+ public specification or open-source implementation is available, but
+ is not required.
+
+4. Collation Specification Requirements
+
+4.1. Collation/Server Interface
+
+ The collation itself defines what it operates on. Most collations
+ are expected to operate on character strings. The i;octet
+ (Section 9.3) collation operates on octet strings. The i;ascii-
+ numeric (Section 9.1) operation operates on numbers.
+
+ This specification defines the collation interface in terms of octet
+ strings. However, implementations may choose to use character
+ strings instead. Such implementations may not be able to implement
+ e.g., i;octet. Since i;octet is not currently mandatory to implement
+ for any protocol, this should not be a problem.
+
+4.2. Operations Supported
+
+ A collation specification MUST state which of the three basic
+ operations are supported (equality, substring, ordering) and how to
+ perform each of the supported operations on any two input character
+ strings, including empty strings. Collations must be deterministic,
+ i.e., given a collation with a specific identifier, and any two fixed
+ input strings, the result MUST be the same for the same operation.
+
+ In general, collation operations should behave as their names
+ suggest. While a collation may be new, the operations are not, so
+ the new collation's operations should be similar to those of older
+ collations. For example, a date/time collation should not provide a
+ "substring" operation that would morph IMAP substring SEARCH into
+ e.g., a date-range search.
+
+ A non-obvious consequence of the rules for each collation operation
+ is that, for any single collation, either none or all of the
+ operations can return "undefined". For example, it is not possible
+ to have an equality operation that never returns "undefined", and a
+ substring operation that occasionally does.
+
+
+
+Newman, et al. Standards Track [Page 8]
+
+RFC 4790 Collation Registry March 2007
+
+
+4.2.1. Validity
+
+ The validity test takes one string as argument. It returns valid if
+ its input string is a valid input to the collation's other
+ operations, and invalid if not. (In other words, a string is valid
+ if it is equal to itself according to the collation's equality
+ operation.)
+
+ The validity test is provided by all collations. It MUST NOT be
+ listed separately in the collation registration.
+
+4.2.2. Equality
+
+ The equality test always returns "match" or "no-match" when it is
+ supplied valid input, and MAY return "undefined" if one or both input
+ strings are not valid.
+
+ The equality test MUST be reflexive and symmetric. For valid input,
+ it MUST be transitive.
+
+ If a collation provides either a substring or an ordering test, it
+ MUST also provide an equality test. The substring and/or ordering
+ tests MUST be consistent with the equality test.
+
+ The return values of the equality test are called "match", "no-match"
+ and "undefined" in this document.
+
+4.2.3. Substring
+
+ The substring matching operation determines if the first string is a
+ substring of the second string, i.e., if one or more substrings of
+ the second string is equal to the first, as defined by the
+ collation's equality operation.
+
+ A collation that supports substring matching will automatically
+ support two special cases of substring matching: prefix and suffix
+ matching, if those special cases are supported by the application
+ protocol. It returns "match" or "no-match" when it is supplied valid
+ input and returns "undefined" when supplied invalid input.
+
+ Application protocols MAY return position information for substring
+ matches. If this is done, the position information SHOULD include
+ both the starting offset and the ending offset for each match. This
+ is important because more sophisticated collations can match strings
+ of unequal length (for example, a pre-composed accented character can
+ match a decomposed accented character). In general, overlapping
+ matches SHOULD be reported (as when "ana" occurs twice within
+ "banana"), although there are cases where a collation may decide not
+
+
+
+Newman, et al. Standards Track [Page 9]
+
+RFC 4790 Collation Registry March 2007
+
+
+ to. For example, in a collation which treats all whitespace
+ sequences as identical, the substring operation could be defined such
+ that " 1 " (SP "1" SP) is reported just once within " 1 " (SP SP
+ "1" SP SP), not four times (SP SP "1" SP, SP "1" SP, SP "1" SP SP and
+ SP SP "1" SP SP), since the four matches are, in a sense, the same
+ match.
+
+ A string is a substring of itself. The empty string is a substring
+ of all strings.
+
+ Note that the substring operation of some collations can match
+ strings of unequal length. For example, a pre-composed accented
+ character can match a decomposed accented character. The Unicode
+ Collation Algorithm [7] discusses this in more detail.
+
+ The return values of the substring operation are called "match", "no-
+ match", and "undefined" in this document.
+
+4.2.4. Ordering
+
+ The ordering operation determines how two strings are ordered. It
+ MUST be reflexive. For valid input, it MUST be transitive and
+ trichotomous.
+
+ Ordering returns "less" if the first string is listed before the
+ second string, according to the collation; "greater", if the second
+ string is listed before the first string; and "equal", if the two
+ strings are equal, as defined by the collation's equality operation.
+ If one or both strings are invalid, the result of ordering is
+ "undefined".
+
+ When the collation is used with a "+" prefix, the behavior is the
+ same as when used with no prefix. When the collation is used with a
+ "-" prefix, the result of the ordering operation of the collation
+ MUST be reversed.
+
+ The return values of the ordering operation are called "less",
+ "equal", "greater", and "undefined" in this document.
+
+4.3. Sort Keys
+
+ A collation specification SHOULD describe the internal transformation
+ algorithm to generate sort keys. This algorithm can be applied to
+ individual strings, and the result can be stored to potentially
+ optimize future comparison operations. A collation MAY specify that
+ the sort key is generated by the identity function. The sort key may
+ have no meaning to a human. The sort key may not be valid input to
+ the collation.
+
+
+
+Newman, et al. Standards Track [Page 10]
+
+RFC 4790 Collation Registry March 2007
+
+
+4.4. Use of Lookup Tables
+
+ Some collations use customizable lookup tables, e.g., because the
+ tables depend on locale, and may be modified after shipping the
+ software. Collations that use more than one customizable lookup
+ table in a documented format MUST assign numbers to the tables they
+ use. This permits an application protocol command to access the
+ tables used by a server collation, so that clients and servers use
+ the same tables.
+
+5. Application Protocol Requirements
+
+ This section describes the requirements and issues that an
+ application protocol needs to consider if it offers searching,
+ substring matching and/or sorting, and permits the use of characters
+ outside the US-ASCII charset.
+
+5.1. Character Encoding
+
+ The protocol specification has to make sure that it is clear on which
+ characters (rather than just octets) the collations are used. This
+ can be done by specifying the protocol itself in terms of characters
+ (e.g., in the case of a query language), by specifying a single
+ character encoding for the protocol (e.g., UTF-8 [3]), or by
+ carefully describing the relevant issues of character encoding
+ labeling and conversion. In the later case, details to consider
+ include how to handle unknown charsets, any charsets that are
+ mandatory-to-implement, any issues with byte-order that might apply,
+ and any transfer encodings that need to be supported.
+
+5.2. Operations
+
+ The protocol must specify which of the operations defined in this
+ specification (equality matching, substring matching, and ordering)
+ can be invoked in the protocol, and how they are invoked. There may
+ be more than one way to invoke an operation.
+
+ The protocol MUST provide a mechanism for the client to select the
+ collation to use with equality matching, substring matching, and
+ ordering.
+
+ If a protocol needs a total ordering and the collation chosen does
+ not provide it because the ordering operation returns "undefined" at
+ least once, the recommended fallback is to sort all invalid strings
+ after the valid ones, and use i;octet to order the invalid strings.
+
+ Although the collation's substring function provides a list of
+ matches, a protocol need not provide all that to the client. It may
+
+
+
+Newman, et al. Standards Track [Page 11]
+
+RFC 4790 Collation Registry March 2007
+
+
+ provide only the first matching substring, or even just the
+ information that the substring search matched. In this way,
+ collations can be used with protocols that are defined such that "x
+ is a substring of y" returns true-false.
+
+ If the protocol provides positional information for the results of a
+ substring match, that positional information SHOULD fully specify the
+ substring(s) in the result that matches, independent of the length of
+ the search string. For example, returning both the starting and
+ ending offset of the match would suffice, as would the starting
+ offset and a length. Returning just the starting offset is not
+ acceptable. This rule is necessary because advanced collations can
+ treat strings of different lengths as equal (for example, pre-
+ composed and decomposed accented characters).
+
+5.3. Wildcards
+
+ The protocol MUST specify whether it allows the use of wildcards in
+ collation identifiers. If the protocol allows wildcards, then:
+ The protocol MUST specify how comparisons behave in the absence of
+ explicit collation negotiation, or when a collation of "default"
+ is requested. The protocol MAY specify that the default collation
+ used in such circumstances is sensitive to server configuration.
+
+ The protocol SHOULD provide a way to list available collations
+ matching a given wildcard pattern, or patterns.
+
+5.4. String Comparison
+
+ If a protocol compares strings in any nontrivial way, using a
+ collation may be appropriate. As an example, many protocols use
+ case-independent strings. In many cases, a simple ASCII mapping to
+ upper/lower case works well. In other cases, it may be better to use
+ a specifiable collation; for example, so that a server can treat "i"
+ and "I" as equivalent in Italy, and different in Turkey (Turkish also
+ has a dotted upper-case" I" and a dotless lower-case "i").
+
+ Protocol designers should consider, in each case, whether to use a
+ specifiable collation. Keywords often have other needs than user
+ variables, and search arguments may be different again.
+
+5.5. Disconnected Clients
+
+ If the protocol supports disconnected clients, and a collation is
+ used that can use configurable tables (e.g., to support
+ locale-specific extensions), then the client may not be able to
+ reproduce the server's collation operations while offline.
+
+
+
+
+Newman, et al. Standards Track [Page 12]
+
+RFC 4790 Collation Registry March 2007
+
+
+ A mechanism to download such tables has been discussed. Such a
+ mechanism is not included in the present specification, since the
+ problem is not yet well understood.
+
+5.6. Error Codes
+
+ The protocol specification should consider assigning protocol error
+ codes for the following circumstances:
+
+ o The client requests the use of a collation by identifier or
+ pattern, but no implemented collation matches that pattern.
+
+ o The client attempts to use a collation for an operation that is
+ not supported by that collation -- for example, attempting to use
+ the "i;ascii-numeric" collation for substring matching.
+
+ o The client uses an equality or substring matching collation, and
+ the result is an error. It may be appropriate to distinguish
+ between the two input strings, particularly when one is supplied
+ by the client and the other is stored by the server. It might
+ also be appropriate to distinguish the specific case of an invalid
+ UTF-8 string.
+
+5.7. Octet Collation
+
+ The i;octet (Section 9.3) collation is only usable with protocols
+ based on octet-strings. Clients and servers MUST NOT use i;octet
+ with other protocols.
+
+ If the protocol permits the use of collations with data structures
+ other than strings, the protocol MUST describe the default behavior
+ for a collation with those data structures.
+
+6. Use by Existing Protocols
+
+ This section is informative.
+
+ Both ACAP [11] and Sieve [14] are standards track specifications that
+ used collations prior to the creation of this specification and
+ registry. Those standards do not meet all the application protocol
+ requirements described in Section 5.
+
+ These protocols allow the use of the i;octet (Section 9.3) collation
+ working directly on UTF-8 data, as used in these protocols.
+
+
+
+
+
+
+
+Newman, et al. Standards Track [Page 13]
+
+RFC 4790 Collation Registry March 2007
+
+
+ In Sieve, all matches are either true or false. Accordingly, Sieve
+ servers must treat "undefined" and "no-match" results of the equality
+ and substring operations as false, and only "match" as true.
+
+ In ACAP and Sieve, there are no invalid strings. In this document's
+ terms, invalid strings sort after valid strings.
+
+ IMAP [15] also collates, although that is explicit only when the
+ COMPARATOR [17] extension is used. The built-in IMAP substring
+ operation and the ordering provided by the SORT [16] extension may
+ not meet the requirements made in this document.
+
+ Other protocols may be in a similar position.
+
+ In IMAP, the default collation is i;ascii-casemap, because its
+ operations are understood to match IMAP's built-in operations.
+
+7. Collation Registration
+
+7.1. Collation Registration Procedure
+
+ The IETF will create a mailing list, collation@ietf.org, which can be
+ used for public discussion of collation proposals prior to
+ registration. Use of the mailing list is strongly encouraged. The
+ IESG will appoint a designated expert who will monitor the
+ collation@ietf.org mailing list and review registrations.
+
+ The registration procedure begins when a completed registration
+ template is sent to iana@iana.org and collation@ietf.org. The
+ designated expert is expected to tell IANA and the submitter of the
+ registration within two weeks whether the registration is approved,
+ approved with minor changes, or rejected with cause. When a
+ registration is rejected with cause, it can be re-submitted if the
+ concerns listed in the cause are addressed. Decisions made by the
+ designated expert can be appealed to the IESG Applications Area
+ Director, then to the IESG. They follow the normal appeals procedure
+ for IESG decisions.
+
+ Collation registrations in a standards track, BCP, or IESG-approved
+ experimental RFC are owned by the IETF, and changes to the
+ registration follow normal procedures for updating such documents.
+ Collation registrations in other RFCs are owned by the RFC author(s).
+ Other collation registrations are owned by the individual(s) listed
+ in the contact field of the registration, and IANA will preserve this
+ information.
+
+ If the registration is a change of an existing collation, it MUST be
+ approved by the owner. In the event the owner cannot be contacted
+
+
+
+Newman, et al. Standards Track [Page 14]
+
+RFC 4790 Collation Registry March 2007
+
+
+ for a period of one month, and the designated expert deems the change
+ necessary, the IESG MAY re-assign ownership to an appropriate party.
+
+7.2. Collation Registration Format
+
+ Registration of a collation is done by sending a well-formed XML
+ document to collation@ietf.org and iana@iana.org.
+
+7.2.1. Registration Template
+
+ Here is a template for the registration:
+
+ <?xml version='1.0'?>
+ <!DOCTYPE collation SYSTEM 'collationreg.dtd'>
+ <collation rfc="YYYY" scope="global" intendedUse="common">
+ <identifier>collation identifier</identifier>
+ <title>technical title for collation</title>
+ <operations>equality order substring</operations>
+ <specification>specification reference</specification>
+ <owner>email address of owner or IETF</owner>
+ <submitter>email address of submitter</submitter>
+ <version>1</version>
+ </collation>
+
+7.2.2. The Collation Element
+
+ The root of the registration document MUST be a <collation> element.
+ The collation element contains the other elements in the
+ registration, which are described in the following sub-subsections,
+ in the order given here.
+
+ The <collation> element MAY include an "rfc=" attribute if the
+ specification is in an RFC. The "rfc=" attribute gives only the
+ number of the RFC, without any prefix, such as "RFC", or suffix, such
+ as ".txt".
+
+ The <collation> element MUST include a "scope=" attribute, which MUST
+ have one of the values "global", "local", or "other".
+
+ The <collation> element MUST include an "intendedUse=" attribute,
+ which must have one of the values "common", "limited", "vendor", or
+ "deprecated". Collation specifications intended for "common" use are
+ expected to reference standards from standards bodies with
+ significant experience dealing with the details of international
+ character sets.
+
+ Be aware that future revisions of this specification may add
+ additional function types, as well as additional XML attributes,
+
+
+
+Newman, et al. Standards Track [Page 15]
+
+RFC 4790 Collation Registry March 2007
+
+
+ values, and elements. Any system that automatically parses these XML
+ documents MUST take this into account to preserve future
+ compatibility.
+
+7.2.3. The Identifier Element
+
+ The <identifier> element gives the precise identifier of the
+ collation, e.g., i;ascii-casemap. The <identifier> element is
+ mandatory.
+
+7.2.4. The Title Element
+
+ The <title> element gives the title of the collation. The <title>
+ element is mandatory.
+
+7.2.5. The Operations Element
+
+ The <operations> element lists which of the three operations
+ ("equality", "order" or "substring") the collation provides,
+ separated by single spaces. The <operations> element is mandatory.
+
+7.2.6. The Specification Element
+
+ The <specification> element describes where to find the
+ specification. The <specification> element is mandatory. It MAY
+ have a URI attribute. There may be more than one <specification>
+ element, in which case, they together form the specification.
+
+ If it is discovered that parts of a collation specification conflict,
+ a new revision of the collation is necessary, and the
+ collation@ietf.org mailing list should be notified.
+
+7.2.7. The Submitter Element
+
+ The <submitter> element provides an RFC 2822 [12] email address for
+ the person who submitted the registration. It is optional if the
+ <owner> element contains an email address.
+
+ There may be more than one <submitter> element.
+
+7.2.8. The Owner Element
+
+ The <owner> element contains either the four letters "IETF" or an
+ email address of the owner of the registration. The <owner> element
+ is mandatory. There may be more than one <owner> element. If so,
+ all owners are equal. Each owner can speak for all.
+
+
+
+
+
+Newman, et al. Standards Track [Page 16]
+
+RFC 4790 Collation Registry March 2007
+
+
+7.2.9. The Version Element
+
+ The <version> element MUST be included when the registration is
+ likely to be revised, or has been revised in such a way that the
+ results change for one or more input strings. The <version> element
+ is optional.
+
+7.2.10. The Variable Element
+
+ The <variable> element specifies an optional variable to control the
+ collation's behaviour, for example whether it is case sensitive. The
+ <variable> element is optional. When <variable> is used, it must
+ contain <name> and <default> elements, and it may contain one or more
+ <value> elements.
+
+7.2.10.1. The Name Element
+
+ The <name> element specifies the name value of a variable. The
+ <name> element is mandatory.
+
+7.2.10.2. The Default Element
+
+ The <default> element specifies the default value of a variable. The
+ <default> element is mandatory.
+
+7.2.10.3. The Value Element
+
+ The <value> element specifies a legal value of a variable. The
+ <value> element is optional. If one or more <value> elements are
+ present, only those values are legal. If none are, then the
+ variable's legal values do not form an enumerated set, and the rules
+ MUST be specified in an RFC accompanying the registration.
+
+7.3. Structure of Collation Registry
+
+ Once the registration is approved, IANA will store each XML
+ registration document in a URL of the form
+ http://www.iana.org/assignments/collation/collation-id.xml, where
+ collation-id is the content of the identifier element in the
+ registration. Both the submitter and the designated expert are
+ responsible for verifying that the XML is well-formed. The
+ registration document should avoid using new elements. If any are
+ necessary, it is important to be consistent with other registrations.
+
+ IANA will also maintain a text summary of the registry under the name
+ http://www.iana.org/assignments/collation/collation-index.html. This
+ summary is divided into four sections. The first section is for
+ collations intended for common use. This section is intended for
+
+
+
+Newman, et al. Standards Track [Page 17]
+
+RFC 4790 Collation Registry March 2007
+
+
+ collation registrations published in IESG-approved RFCs, or for
+ locally scoped collations from the primary standards body for that
+ locale. The designated expert is encouraged to reject collation
+ registrations with an intended use of "common" if the expert believes
+ it should be "limited", as it is desirable to keep the number of
+ "common" registrations small and of high quality. The second section
+ is reserved for limited-use collations. The third section is
+ reserved for registered vendor-specific collations. The final
+ section is reserved for deprecated collations.
+
+7.4. Example Initial Registry Summary
+
+ The following is an example of how IANA might structure the initial
+ registry summary.html file:
+
+ Collation Functions Scope Reference
+ --------- --------- ----- ---------
+ Common Use Collations:
+ i;ascii-casemap e, o, s Local [RFC 4790]
+
+ Limited Use Collations:
+ i;octet e, o, s Other [RFC 4790]
+ i;ascii-numeric e, o Other [RFC 4790]
+
+ Vendor Collations:
+
+ Deprecated Collations:
+
+
+ References
+ ----------
+ [RFC 4790] Newman, C., Duerst, M., Gulbrandsen, A., "Internet
+ Application Protocol Collation Registry", RFC 4790,
+ Sun Microsystems, March 2007.
+
+8. Guidelines for Expert Reviewer
+
+ The expert reviewer appointed by the IESG has fairly broad latitude
+ for this registry. While a number of collations are expected
+ (particularly customizations of the UCA for localized use), an
+ explosion of collations (particularly common-use collations) is not
+ desirable for widespread interoperability. However, it is important
+ for the expert reviewer to provide cause when rejecting a
+ registration, and, when possible, to describe corrective action to
+
+
+
+
+
+
+
+Newman, et al. Standards Track [Page 18]
+
+RFC 4790 Collation Registry March 2007
+
+
+ permit the registration to proceed. The following table includes
+ some example reasons to reject a registration with cause:
+
+ o The registration is not a well-formed XML document.
+
+ o The registration has an intended use of "common", but there is no
+ evidence the collation will be widely deployed, so it should be
+ listed as "limited".
+
+ o The registration has an intended use of "common", but it is
+ redundant with the functionality of a previously registered
+ "common" collation.
+
+ o The registration has an intended use of "common", but the
+ specification is not detailed enough to allow interoperable
+ implementations by others.
+
+ o The collation identifier fails to precisely identify the version
+ numbers of relevant tables to use.
+
+ o The registration fails to meet one of the "MUST" requirements in
+ Section 4.
+
+ o The collation identifier fails to meet the syntax in Section 3.
+
+ o The collation specification referenced in the registration is
+ vague or has optional features without a clear behavior specified.
+
+ o The referenced specification does not adequately address security
+ considerations specific to that collation.
+
+ o The registration's operations are needlessly different from those
+ of traditional operations.
+
+ o The registration's XML is needlessly different from that of
+ already registered collations.
+
+9. Initial Collations
+
+ This section registers the three collations that were originally
+ defined in [11], and are implemented in most [14] engines. Some of
+ the behavior of these collations is perhaps not ideal, such as
+ i;ascii-casemap accepting non-ASCII input. Compatibility with widely
+ deployed code was judged more important than fixing the collations.
+ Some of the aspects of these collations are necessary to maintain
+ compatibility with widely deployed code.
+
+
+
+
+
+Newman, et al. Standards Track [Page 19]
+
+RFC 4790 Collation Registry March 2007
+
+
+9.1. ASCII Numeric Collation
+
+9.1.1. ASCII Numeric Collation Description
+
+ The "i;ascii-numeric" collation is a simple collation intended for
+ use with arbitrarily-sized, unsigned decimal integer numbers stored
+ as octet strings. US-ASCII digits (0x30 to 0x39) represent digits of
+ the numbers. Before converting from string to integer, the input
+ string is truncated at the first non-digit character. All input is
+ valid; strings that do not start with a digit represent positive
+ infinity.
+
+ The collation supports equality and ordering, but does not support
+ the substring operation.
+
+ The equality operation returns "match" if the two strings represent
+ the same number (i.e., leading zeroes and trailing non-digits are
+ disregarded), and "no-match" if the two strings represent different
+ numbers.
+
+ The ordering operation returns "less" if the first string represents
+ a smaller number than the second, "equal" if they represent the same
+ number, and "greater" if the first string represents a larger number
+ than the second.
+
+ Some examples: "0" is less than "1", and "1" is less than
+ "4294967298". "4294967298", "04294967298", and "4294967298b" are all
+ equal. "04294967298" is less than "". "", "x", and "y" are equal.
+
+9.1.2. ASCII Numeric Collation Registration
+
+ <?xml version='1.0'?>
+ <!DOCTYPE collation SYSTEM 'collationreg.dtd'>
+ <collation rfc="4790" scope="other" intendedUse="limited">
+ <identifier>i;ascii-numeric</identifier>
+ <title>ASCII Numeric</title>
+ <operations>equality order</operations>
+ <specification>RFC 4790</specification>
+ <owner>IETF</owner>
+ <submitter>chris.newman@sun.com</submitter>
+ </collation>
+
+
+
+
+
+
+
+
+
+
+Newman, et al. Standards Track [Page 20]
+
+RFC 4790 Collation Registry March 2007
+
+
+9.2. ASCII Casemap Collation
+
+9.2.1. ASCII Casemap Collation Description
+
+ The "i;ascii-casemap" collation is a simple collation that operates
+ on octet strings and treats US-ASCII letters case-insensitively. It
+ provides equality, substring, and ordering operations. All input is
+ valid. Note that letters outside ASCII are not treated case-
+ insensitively.
+
+ Its equality, ordering, and substring operations are as for i;octet,
+ except that at first, the lower-case letters (octet values 97-122) in
+ each input string are changed to upper case (octet values 65-90).
+
+ Care should be taken when using OS-supplied functions to implement
+ this collation, as it is not locale sensitive. Functions, such as
+ strcasecmp and toupper, are sometimes locale sensitive, and may
+ inappropriately map lower-case letters other than a-z to upper case.
+
+ The i;ascii-casemap collation is well-suited for use with many
+ Internet protocols and computer languages. Use with natural language
+ is often inappropriate; even though the collation apparently supports
+ languages such as Swahili and English, in real-world use, it tends to
+ mis-sort a number of types of string:
+
+ o people and place names containing non-ASCII,
+
+ o words such as "naive" (if spelled with an accent, the accented
+ character could push the word to the wrong spot in a sorted list),
+
+ o names such as "Lloyd" (which, in Welsh, sorts after "Lyon", unlike
+ in English),
+
+ o strings containing euro and pound sterling symbols, quotation
+ marks other than '"', dashes/hyphens, etc.
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+Newman, et al. Standards Track [Page 21]
+
+RFC 4790 Collation Registry March 2007
+
+
+9.2.2. ASCII Casemap Collation Registration
+
+ <?xml version='1.0'?>
+ <!DOCTYPE collation SYSTEM 'collationreg.dtd'>
+ <collation rfc="4790" scope="local" intendedUse="common">
+ <identifier>i;ascii-casemap</identifier>
+ <title>ASCII Casemap</title>
+ <operations>equality order substring</operations>
+ <specification>RFC 4790</specification>
+ <owner>IETF</owner>
+ <submitter>chris.newman@sun.com</submitter>
+ </collation>
+
+9.3. Octet Collation
+
+9.3.1. Octet Collation Description
+
+ The "i;octet" collation is a simple and fast collation intended for
+ use on binary octet strings rather than on character data. Protocols
+ that want to make this collation available have to do so by
+ explicitly allowing it. If not explicitly allowed, it MUST NOT be
+ used. It never returns an "undefined" result. It provides equality,
+ substring, and ordering operations.
+
+ The ordering algorithm is as follows:
+
+ 1. If both strings are the empty string, return the result "equal".
+
+ 2. If the first string is empty and the second is not, return the
+ result "less".
+
+ 3. If the second string is empty and the first is not, return the
+ result "greater".
+
+ 4. If both strings begin with the same octet value, remove the first
+ octet from both strings and repeat this algorithm from step 1.
+
+ 5. If the unsigned value (0 to 255) of the first octet of the first
+ string is less than the unsigned value of the first octet of the
+ second string, then return "less".
+
+ 6. If this step is reached, return "greater".
+
+ This algorithm is roughly equivalent to the C library function
+ memcmp, with appropriate length checks added.
+
+
+
+
+
+
+Newman, et al. Standards Track [Page 22]
+
+RFC 4790 Collation Registry March 2007
+
+
+ The matching operation returns "match" if the sorting algorithm would
+ return "equal". Otherwise, the matching operation returns "no-
+ match".
+
+ The substring operation returns "match" if the first string is the
+ empty string, or if there exists a substring of the second string of
+ length equal to the length of the first string, which would result in
+ a "match" result from the equality function. Otherwise, the
+ substring operation returns "no-match".
+
+9.3.2. Octet Collation Registration
+
+ This collation is defined with intendedUse="limited" because it can
+ only be used by protocols that explicitly allow it.
+
+ <?xml version='1.0'?>
+ <!DOCTYPE collation SYSTEM 'collationreg.dtd'>
+ <collation rfc="4790" scope="global" intendedUse="limited">
+ <identifier>i;octet</identifier>
+ <title>Octet</title>
+ <operations>equality order substring</operations>
+ <specification>RFC 4790</specification>
+ <owner>IETF</owner>
+ <submitter>chris.newman@sun.com</submitter>
+ </collation>
+
+10. IANA Considerations
+
+ Section 7 defines how to register collations with IANA. Section 9
+ defines a list of predefined collations that have been registered
+ with IANA.
+
+11. Security Considerations
+
+ Collations will normally be used with UTF-8 strings. Thus, the
+ security considerations for UTF-8 [3], stringprep [6], and Unicode
+ TR-36 [8] also apply, and are normative to this specification.
+
+12. Acknowledgements
+
+ The authors want to thank all who have contributed to this document,
+ including Brian Carpenter, John Cowan, Dave Cridland, Mark Davis,
+ Spencer Dawkins, Lisa Dusseault, Lars Eggert, Frank Ellermann, Philip
+ Guenther, Tony Hansen, Ted Hardie, Sam Hartman, Kjetil Torgrim Homme,
+ Michael Kay, John Klensin, Alexey Melnikov, Jim Melton, and Abhijit
+ Menon-Sen.
+
+
+
+
+
+Newman, et al. Standards Track [Page 23]
+
+RFC 4790 Collation Registry March 2007
+
+
+13. References
+
+13.1. Normative References
+
+ [1] Bradner, S., "Key words for use in RFCs to Indicate Requirement
+ Levels", BCP 14, RFC 2119, March 1997.
+
+ [2] Crocker, D. and P. Overell, "Augmented BNF for Syntax
+ Specifications: ABNF", RFC 4234, October 2005.
+
+ [3] Yergeau, F., "UTF-8, a transformation format of ISO 10646",
+ STD 63, RFC 3629, November 2003.
+
+ [4] Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform
+ Resource Identifier (URI): Generic Syntax", RFC 3986,
+ January 2005.
+
+ [5] Phillips, A. and M. Davis, "Tags for Identifying Languages",
+ BCP 47, RFC 4646, September 2006.
+
+ [6] Hoffman, P. and M. Blanchet, "Preparation of Internationalized
+ Strings ("stringprep")", RFC 3454, December 2002.
+
+ [7] Davis, M. and K. Whistler, "Unicode Collation Algorithm version
+ 14", May 2005,
+ <http://www.unicode.org/reports/tr10/tr10-14.html>.
+
+ [8] Davis, M. and M. Suignard, "Unicode Security Considerations",
+ February 2006, <http://www.unicode.org/reports/tr36/>.
+
+13.2. Informative References
+
+ [9] Freed, N. and N. Borenstein, "Multipurpose Internet Mail
+ Extensions (MIME) Part One: Format of Internet Message Bodies",
+ RFC 2045, November 1996.
+
+ [10] Melnikov, A., "Simple Authentication and Security Layer
+ (SASL)", RFC 4422, June 2006.
+
+ [11] Newman, C. and J. Myers, "ACAP -- Application Configuration
+ Access Protocol", RFC 2244, November 1997.
+
+ [12] Resnick, P., "Internet Message Format", RFC 2822, April 2001.
+
+ [13] Freed, N. and J. Postel, "IANA Charset Registration
+ Procedures", BCP 19, RFC 2978, October 2000.
+
+
+
+
+
+Newman, et al. Standards Track [Page 24]
+
+RFC 4790 Collation Registry March 2007
+
+
+ [14] Showalter, T., "Sieve: A Mail Filtering Language", RFC 3028,
+ January 2001.
+
+ [15] Crispin, M., "Internet Message Access Protocol - Version
+ 4rev1", RFC 3501, March 2003.
+
+ [16] Crispin, M. and K. Murchison, "Internet Message Access Protocol
+ - Sort and Thread Extensions", Work in Progress, May 2004.
+
+ [17] Newman, C. and A. Gulbrandsen, "Internet Message Access
+ Protocol Internationalization", Work in Progress, January 2006.
+
+Authors' Addresses
+
+ Chris Newman
+ Sun Microsystems
+ 1050 Lakes Drive
+ West Covina, CA 91790
+ USA
+
+ EMail: chris.newman@sun.com
+
+
+ Martin Duerst
+ Aoyama Gakuin University
+ 5-10-1 Fuchinobe
+ Sagamihara, Kanagawa 229-8558
+ Japan
+
+ Phone: +81 42 759 6329
+ Fax: +81 42 759 6495
+ EMail: duerst@it.aoyama.ac.jp
+ URI: http://www.sw.it.aoyama.ac.jp/D%C3%BCrst/
+
+ Note: Please write "Duerst" with u-umlaut wherever possible, for
+ example as "D&#252;rst" in XML and HTML.
+
+
+ Arnt Gulbrandsen
+ Oryx Mail Systems GmbH
+ Schweppermannstr. 8
+ 81671 Munich
+ Germany
+
+ Fax: +49 89 4502 9758
+ EMail: arnt@oryx.com
+ URI: http://www.oryx.com/arnt/
+
+
+
+
+Newman, et al. Standards Track [Page 25]
+
+RFC 4790 Collation Registry March 2007
+
+
+Full Copyright Statement
+
+ Copyright (C) The IETF Trust (2007).
+
+ This document is subject to the rights, licenses and restrictions
+ contained in BCP 78, and except as set forth therein, the authors
+ retain all their rights.
+
+ This document and the information contained herein are provided on an
+ "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
+ OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND
+ THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS
+ OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF
+ THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
+ WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+
+Intellectual Property
+
+ The IETF takes no position regarding the validity or scope of any
+ Intellectual Property Rights or other rights that might be claimed to
+ pertain to the implementation or use of the technology described in
+ this document or the extent to which any license under such rights
+ might or might not be available; nor does it represent that it has
+ made any independent effort to identify any such rights. Information
+ on the procedures with respect to rights in RFC documents can be
+ found in BCP 78 and BCP 79.
+
+ Copies of IPR disclosures made to the IETF Secretariat and any
+ assurances of licenses to be made available, or the result of an
+ attempt made to obtain a general license or permission for the use of
+ such proprietary rights by implementers or users of this
+ specification can be obtained from the IETF on-line IPR repository at
+ http://www.ietf.org/ipr.
+
+ The IETF invites any interested party to bring to its attention any
+ copyrights, patents or patent applications, or other proprietary
+ rights that may cover technology that may be required to implement
+ this standard. Please address the information to the IETF at
+ ietf-ipr@ietf.org.
+
+Acknowledgement
+
+ Funding for the RFC Editor function is currently provided by the
+ Internet Society.
+
+
+
+
+
+
+
+Newman, et al. Standards Track [Page 26]
+