A Guide to Testing Rails Applications ===================================== This guide covers built-in mechanisms offered by Rails to test your application. By referring to this guide, you will be able to: * Understand Rails testing terminologies * Write unit, functional and integration tests for your application * Read about other popular testing approaches and plugins Assumptions: * You have spent more than 15 minutes in building your first application * The guide has been written for Rails 2.1 and above == Why write tests for your Rails applications? * Since Ruby code that you write in your Rails application is interpreted, you may only find that its broken when you actually run your application server and use it through the browser. Writing tests is a clean way of running through your code and catching syntactical and logic errors. * Rails tests can also simulate browser requests and thus you can test your applications response without having to test it through your browser. * By simply running your Rails tests you can ensure your code adheres to the desired functionality even after some major code refactoring. * Rails makes it super easy to write your tests. Its starts producing skeleton code in background while you are creating your models and controllers. == Before you start writing tests == === The 3 Environments === Testing support was woven into the Rails fabric from the beginning. It wasn't a ``oh! let's bolt on support for running tests because they're new and cool'' epiphany. Each Rails application you build has 3 sides. A side for production, a side for development and a side for testing. Let's take a closer look at the Rails 'config/database.yml' file. This YAML configuration file has 3 different sections defining 3 unique database setups: * production * development * test ===== Why 3 different databases? ===== Well, there's one for testing where you can use sample data, there's one for development where you'll be most of the time as you develop your application, and then production for the ``real deal'', or when it goes live. Every new Rails application should have these 3 sections filled out. They should point to different databases. You may end up not having a local database for your production environment, but development and test should both exist and be different. ===== Why Make This Distinction? ===== If you stop and think about it for a second, it makes sense. By segregating your development database and your testing database, you're not in any danger of losing any data where it matters. For example, you need to test your new `delete_this_user_and_every_everything_associated_with_it` function. Wouldn't you want to run this in an environment which makes no difference if you destroy data or not? When you do end up destroying your testing database (and it will happen, trust me), simply run a task in your rakefile to rebuild it from scratch according to the specs defined in the development database. You can do this by running `rake db:test:prepare`. === Rails kicks-in right from the word go === Rails creates a test folder for you as soon as you initiate a Rails project using `rails application_name`. If you list the contents of this folder then you shall see: [source,shell] ------------------------------------------------------ $ ls -F test/ fixtures/ functional/ integration/ test_helper.rb unit/ ------------------------------------------------------ The 'unit' folder is meant to hold tests for your models, 'functional' folder is meant to hold tests for your controllers and 'integration' folder is meant to hold tests that involves any number of controllers. Fixtures are a way of organizing data that you want to test against and reside in the 'fixtures' folder. 'test_helper.rb' holds default configuration for your tests. === The Lo-Down on Fixtures === ==== What They Are ==== Fixtures is a fancy word for 'sample data'. Fixtures allow you to populate your testing database with predefined data before your tests run. Fixtures are database independent and assume one of two formats: *YAML* or *CSV*. You'll find fixtures under your 'test/fixtures' directory. When you run `script/generate model` to create a new model, fixture stubs will be automatically created and placed in this directory. ==== YAML the Camel is a Mammal with Enamel ==== YAML-formatted fixtures are a very human-friendly way to describe your sample data. These types of fixtures have the *.yml* file extension (as in 'users.yml'). On any given day, a YAML fixture file may look like this: --------------------------------------------- # low & behold! I am a YAML comment! david: id: 1 name: David Heinemeier Hansson birthday: 1979-10-15 profession: Systems development steve: id: 2 name: Steve Ross Kellock birthday: 1974-09-27 profession: guy with keyboard --------------------------------------------- Each fixture is given a 'name' followed by an indented list of colon-separated key/value pairs. Records are separated by a blank space. You can place comments by using the # character in the first column. ==== Comma Seperated ==== Fixtures can also be described using the all-too-familiar comma-separated value file format. These files, just like YAML fixtures are placed in the 'test/fixtures directory', but these end with the *.csv* file extension (as in 'celebrity_holiday_figures.csv'). A CSV fixture looks like this: -------------------------------------------------------------- id, username, password, stretchable, comments 1, sclaus, ihatekids, false, I like to say ""Ho! Ho! Ho!"" 2, ebunny, ihateeggs, true, Hoppity hop y'all 3, tfairy, ilovecavities, true, "Pull your teeth, I will" -------------------------------------------------------------- The first line is the header. It is a comma-separated list of fields. The rest of the file is the payload: 1 record per line. A few notes about this format: * each cell is stripped of outward facing spaces * if you use a comma as data, the cell must be encased in quotes * if you use a quote as data, you must escape it with a 2nd quote * don't use blank lines * nulls can be achived by just placing a comma, for example, (1,sclaus,,false,) minus the parenthesis of course. Unlike the YAML format where you give each fixture a name, CSV fixture names are automatically generated. They follow a pattern of ``model-name''-''counter''. In the above example, you would have: -------------------------------------------------------------- celebrity-holiday-figures-1 celebrity-holiday-figures-2 celebrity-holiday-figures-3 -------------------------------------------------------------- The CSV format is great to use if you have existing data in a spreadsheet or database and you are able to save it (or export it) as a CSV. ==== ERb'in It Up ==== ERb allows you embed ruby code within templates. Both the YAML and CSV fixture formats are pre-processed with ERb. This allows you to use Ruby to help you generate some sample data. I'll demonstrate with a YAML file: -------------------------------------------------------------- <% earth_size = 20 -%> mercury: id: 1 size: <%= earth_size / 50 %> venus: id: 2 size: <%= earth_size / 2 %> mars: id: 3 size: <%= earth_size - 69 %> -------------------------------------------------------------- Anything encased within the ------------- <% -%> ------------- tag is considered Ruby code. To actually print something out, you must use the ------------- <%= %> ------------- tag. ==== Fixtures in Action ==== Rails by default automatically loads all fixtures from the 'test/fixtures' folder for your unit and functional test. Along with which it does 3 things. Let's see an example for 'users' fixture file: * it nukes any existing data living in the users table * it loads the fixture data (if any) into the users table * it dumps the data into a variable in case you want to access it directly ==== Hashes with Special Powers ==== Fixtures are basically Hash objects. As mentioned in point #3 above, you can access the hash object directly because it is automatically setup as a local variable of the test case. [source, ruby] -------------------------------------------------------------- ... # this will return the Hash for the fixture named david users(:david) # this will return the property for david called id users(:david).id ... -------------------------------------------------------------- But, by there's another side to fixtures... at night, if the moon is full and the wind completely still, fixtures can also transform themselves into the form of the original class! Now you can get at the methods only available to that class. [source, ruby] -------------------------------------------------------------- ... # using the find method, we grab the "real" david as a User david = users(:david).find # an now we have access to methods only available to a User class email( david.girlfriend.email, david.illegitimate_children ) ... -------------------------------------------------------------- == Unit tests for your Models == In Rails, unit tests are what you write to test your models. When you create a model using `script/generate`, among other things it creates a test stub in the 'test/unit' folder. ------------------------------------------------------- $ script/generate model Post ... create app/models/post.rb create test/unit/post_test.rb create test/fixtures/posts.yml ... ------------------------------------------------------- The default test stub in 'test/unit/post_test.rb' should look like: [source,ruby] -------------------------------------------------- require 'test_helper' class PostTest < ActiveSupport::TestCase # Replace this with your real tests. def test_truth assert true end end -------------------------------------------------- Let's examine this file line by line so that you have a clear understanding of the involved terminologies. `require 'test_helper'` As you know by now that `test_helper.rb` specifies the default configuration to run our tests. This is included with all the tests. Thus any methods added to this file are available to all your tests. `class PostTest < ActiveSupport::TestCase` Class 'PostTest' is called a test case as it inherits from `ActiveSupport::TestCase`. 'PostTest' thus has all the methods available for ActiveSupport::TestCase. We shall look into the methods available a little later in this guide. `def test_truth` Any method defined within a Test Case that begins with 'test' (case sensitive) is simply called a test. So, test_password, test_valid_password and testValidPassword all are legal test names and are run automatically when the test case is run. `assert true` This line of code is called an assertion. An Assertion is 1 line of code that evaluates an object (or expression) for expected results. For example, is this value = that value? is this object nil? does this line of code throw an exception? is the user's password greater than 5 characters? The assert method is available as 'PostTest' inherits from `ActiveSupport::TestCase` A test consists of one or more assertions. Only when all the assertions are successful the test passes. === Running your test === Running a test is as simple as invoking the file through Ruby. ------------------------------------------------------- $ cd test $ ruby unit/post_test.rb Loaded suite unit/post_test Started . Finished in 0.023513 seconds. 1 tests, 1 assertions, 0 failures, 0 errors ------------------------------------------------------- This would run all the test methods from the test case. You could also run a particular test method from the test case by using the `-n` switch with the 'test method name' ------------------------------------------------------- $ ruby unit/post_test.rb -n test_truth Loaded suite unit/post_test Started . Finished in 0.023513 seconds. 1 tests, 1 assertions, 0 failures, 0 errors ------------------------------------------------------- The '.' (dot) above indicates a passing test. When a test fails you see a F or if there is an error you see an E in its place. The last line of the output is the summary. To see how a test failure is reported, lets write a test which reports a failure. [source,ruby] -------------------------------------------------- # test/unit/post_test.rb ... def test_should_have_atleast_one_post post = Post.find(:first) assert_not_nil post end ... -------------------------------------------------- Here I am assuming you have still not added fixture data in posts.yml Let's run this test. ------------------------------------------------------- $ ruby unit/post_test.rb Loaded suite unit/post_test Started F. Finished in 0.027274 seconds. 1) Failure: test_should_have_atleast_one_post(PostTest) [unit/post_test.rb:12:in `test_should_have_atleast_one_post' /opt/local/lib/ruby/gems/1.8/gems/activesupport-2.1.1/lib/active_support/testing/setup_and_teardown.rb:33:in `__send__' /opt/local/lib/ruby/gems/1.8/gems/activesupport-2.1.1/lib/active_support/testing/setup_and_teardown.rb:33:in `run']: expected to not be nil. 2 tests, 2 assertions, 1 failures, 0 errors ------------------------------------------------------- Above, 'F' denotes a failure and its corresponding trace is shown under '1)' along with the name of the test failing, which is: test_should_have_atleast_one_post(PostTest). The next few lines contain the stack trace followed by a message which mentions the actual value and the expected value by the assertion. Though, it is not highly readable it does provide us with just enough information at most times. To make the assertion failure message more readable every assertion provides an optional message parameter. Let's see the same assertion with a message parameter. [source,ruby] -------------------------------------------------- # test/unit/post_test.rb ... def test_should_have_atleast_one_post post = Post.find(:first) assert_not_nil post, "Should not be nil as Posts table should have atleast one post" end ... -------------------------------------------------- Let's run this test in the console. ------------------------------------------------------- $ ruby unit/post_test.rb Loaded suite unit/post_test Started F. Finished in 0.024727 seconds. 1) Failure: test_should_have_atleast_one_post(PostTest) [unit/post_test.rb:11:in `test_should_have_atleast_one_post' /opt/local/lib/ruby/gems/1.8/gems/activesupport-2.1.1/lib/active_support/testing/setup_and_teardown.rb:33:in `__send__' /opt/local/lib/ruby/gems/1.8/gems/activesupport-2.1.1/lib/active_support/testing/setup_and_teardown.rb:33:in `run']: Should not be nil as Posts table should have atleast one post. expected to not be nil. 2 tests, 2 assertions, 1 failures, 0 errors ------------------------------------------------------- Now you can see an additional message in the test failure report which makes much more sense while troubleshooting. To see how an error is reported, let's add a test to our test case that introduces an error. [source,ruby] -------------------------------------------------- # test/unit/post_test.rb ... def test_should_report_error # some_undefined_variable is not defined elsewhere in the test case some_undefined_variable assert true end ... -------------------------------------------------- Let's run this test in our console. ------------------------------------------------------- $ ruby unit/post_test.rb Loaded suite unit/post_test Started FE. Finished in 0.108389 seconds. 1) Failure: test_should_have_atleast_one_post(PostTest) [unit/post_test.rb:11:in `test_should_have_atleast_one_post' /opt/local/lib/ruby/gems/1.8/gems/activesupport-2.1.1/lib/active_support/testing/setup_and_teardown.rb:33:in `__send__' /opt/local/lib/ruby/gems/1.8/gems/activesupport-2.1.1/lib/active_support/testing/setup_and_teardown.rb:33:in `run']: Should not be nil as Posts table should have atleast one post. expected to not be nil. 2) Error: test_should_report_error(PostTest): NameError: undefined local variable or method `some_undefined_variable' for # /opt/local/lib/ruby/gems/1.8/gems/actionpack-2.1.1/lib/action_controller/test_process.rb:467:in `method_missing' unit/post_test.rb:15:in `test_should_report_error' /opt/local/lib/ruby/gems/1.8/gems/activesupport-2.1.1/lib/active_support/testing/setup_and_teardown.rb:33:in `__send__' /opt/local/lib/ruby/gems/1.8/gems/activesupport-2.1.1/lib/active_support/testing/setup_and_teardown.rb:33:in `run' 3 tests, 2 assertions, 1 failures, 1 errors ------------------------------------------------------- Notice the 'E' in the output. It denotes a test with error. A thing to note here is that the execution of the test method is stopped as soon as an error or a assertion failure is encountered and the test suite continues with the next method. All test methods are executed in alphabetical order. === What to include in your Unit Tests === Ideally you would like to include a test for everything which could probably break. Its a good practice to have a test for each of your validations and at least 1 test for every method in your model. === Assertions Available === By now you've caught a glimpse of some of the assertions that are available. Assertions are the worker bees of testing. They are the ones that actually perform the checks to ensure things are going as planned. There are a bunch of different types of assertions you can use. Here's the complete list of assertions that ship with test/unit. The [msg] is an optional string message you can specify to make your test failure messages clearer. It's not required. `assert( boolean, [msg] )`:: Ensures that the object/expression is true. `assert_equal( obj1, obj2, [msg] )`:: Ensures that `obj1 == obj2` is true. `assert_not_equal( obj1, obj2, [msg] )`:: Ensures that `obj1 == obj2` is false. `assert_same( obj1, obj2, [msg] )`:: Ensures that `obj1.equal?(obj2)` is true. `assert_not_same( obj1, obj2, [msg] )`:: Ensures that `obj1.equal?(obj2)` is false. `assert_nil( obj, [msg] )`:: Ensures that `obj.nil?` is true. `assert_not_nil( obj, [msg] )`:: Ensures that `obj.nil?` is false. `assert_match( regexp, string, [msg] )`:: Ensures that a string matches the regular expression. `assert_no_match( regexp, string, [msg] )`:: Ensures that a string doesn't matches the regular expression. `assert_in_delta( expecting, actual, delta, [msg] )`:: Ensures that the numbers `expecting` and `actual` are within `delta` of each other. `assert_throws( symbol, [msg] ) { block }`:: Ensures that the given block throws the symbol. `assert_raises( exception1, exception2, ... ) { block }`:: Ensures that the given block raises one of the given exceptions. `assert_nothing_raised( exception1, exception2, ... ) { block }`:: Ensures that the given block doesn't raise one of the given exceptions. `assert_instance_of( class, obj, [msg] )`:: Ensures that `obj` is of the `class` type. `assert_kind_of( class, obj, [msg] )`:: Ensures that `obj` is or descends from `class`. `assert_respond_to( obj, symbol, [msg] )`:: Ensures that obj has a method called symbol. `assert_operator( obj1, operator, obj2, [msg] )`:: Ensures that `obj1.operator(obj2)` is true. `assert_send( array, [msg] )`:: Ensures that executing the method listed in `array[1]` on the object in `array[0]` with the parameters of `array[2 and up]` is true. This one is weird eh? `flunk( [msg] )`:: Ensures failure... like me and high school chemistry exams. Because of the modular nature of the testing framework, it is possible to create your own assertions. In fact, that's exactly what Rails does. It has some specialized assertions to make your life easier. Creating your own assertions is more of an advanced topic we won't cover in this tutorial. === Rails Specific Assertions === `assert_valid(record)`:: Ensures that the passed record is valid by Active Record standards and returns any error messages if it is not. `assert_difference(expressions, difference = 1, message = nil) {|| ...}`:: Test numeric difference between the return value of an expression as a result of what is evaluated in the yielded block. `assert_no_difference(expressions, message = nil, &block)`:: Assertion that the numeric result of evaluating an expression is not changed before and after invoking the passed in block. `assert_recognizes(expected_options, path, extras={}, message=nil)`:: Asserts that the routing of the given path was handled correctly and that the parsed options (given in the expected_options hash) match path. Basically, it asserts that Rails recognizes the route given by expected_options. `assert_generates(expected_path, options, defaults={}, extras = {}, message=nil)`:: Asserts that the provided options can be used to generate the provided path. This is the inverse of assert_recognizes. The extras parameter is used to tell the request the names and values of additional request parameters that would be in a query string. The message parameter allows you to specify a custom error message for assertion failures. `assert_response(type, message = nil)`:: Asserts that the response is one of the following types: * :success - Status code was 200 * :redirect - Status code was in the 300-399 range * :missing - Status code was 404 * :error - Status code was in the 500-599 range `assert_redirected_to(options = {}, message=nil)`:: Assert that the redirection options passed in match those of the redirect called in the latest action. This match can be partial, such that assert_redirected_to(:controller => "weblog") will also match the redirection of redirect_to(:controller => "weblog", :action => "show") and so on. `assert_template(expected = nil, message=nil)`:: Asserts that the request was rendered with the appropriate template file. You would get to see the usage of some of these assertions in the next chapter. == Functional tests for your Controllers == In Rails, testing various actions of a single controller is termed as writing functional tests for that controller. Controllers handle the incoming web requests to your application and eventually respond with a rendered view. Thus, you should test for things such as: * was the web request successful? * were we redirected to the right page? * were we successfully authenticated? * was the correct object stored in the response template? * was the appropriate message displayed to the user in the view When you use `script/generate` to create a controller, it automatically creates a functional test for that controller in 'test/functional'. Let's create a post controller: ------------------------------------------------------- $ script/generate controller post ... create app/controllers/post_controller.rb create test/functional/post_controller_test.rb ... ------------------------------------------------------- Now if you take a look at the file 'posts_controller_test.rb' in the 'test/functional' directory, you should see: [source,ruby] -------------------------------------------------- require 'test_helper' class PostsControllerTest < ActionController::TestCase # Replace this with your real tests. def test_truth assert true end end -------------------------------------------------- Example functional tests for posts controller: [source,ruby] -------------------------------------------------- def test_should_get_index get :index assert_response :success assert_not_nil assigns(:posts) end -------------------------------------------------- In the test_should_get_index test, we are simulating a request on the action called index, making sure the request was successful and also ensuring that it assigns a valid `posts` instance variable. The get method kicks off the web request and populates the results into the response. It accepts 4 arguments. * The action of the controller you are requesting. It can be in the form of a string or a symbol. * An optional hash of request parameters to pass into the action (eg. query string parameters or post variables). * An optional hash of session variables to pass along with the request. * An optional hash of flash to stash your goulash. Example: Calling the :show action, passing an id of 12 as the params and setting user_id of 5 in the session. get(:show, {'id' => "12"}, {'user_id' => 5}) Another example: Calling the :view action, passing an id of 12 as the params, this time with no session, but with a flash message. get(:view, {'id' => '12'}, nil, {'message' => 'booya!'}) === Available request types at your disposal === For those of you familiar with HTTP protocol, you'll know that get is a type of request. There are 5 request types supported in Rails: * get * post * put * head * delete All of request types are methods that you can use, however, you'll probably end up using the first two more ofter than the others. === The 4 Hashes of the Apocolypse === After the request has been made by using one of the 5 methods (get, post, etc…), you will have 4 Hash objects ready for use. They are (starring in alphabetical order): assigns Any objects that are stored as instance variables in actions for use in views. cookies Any objects cookies that are set. flash Any objects living in the flash. session Any object living in session variables. As is the case with normal Hash objects, you can access the values by referencing the keys by string. You can also reference them by symbol name… except assigns. Check it out: flash["gordon"] flash[:gordon] session["shmession"] session[:shmession] cookies["are_good_for_u"] cookies[:are_good_for_u] # Because you can't use assigns[:something] for historical reasons: assigns["something"] assigns(:something) === Instance variables available === * `@controller` * `@request` * `@response` Another example that uses flash, assert_redirected_to, assert_difference [source,ruby] -------------------------------------------------- def test_should_create_post assert_difference('Post.count') do post :create, :post => { :title => 'Hi', :body => 'This is my first post.'} end assert_redirected_to post_path(assigns(:post)) assert_equal 'Post was successfully created.', flash[:notice] end -------------------------------------------------- === Testing Views using assert_select === http://api.rubyonrails.org/classes/ActionController/Assertions/SelectorAssertions.html#M000749 ==== Additional view based assertions ==== * assert_select_rjs * assert_select_email * assert_select_encoded == Integration Testing == Integration tests are used to test interaction among any number of controllers. They are generally used to test important work flows within your application. Unlike Unit and Functional tests they have to be explicitly created under the 'test/integration' folder within our application. Rails provides a generator to create an integration test skeleton for you. Example: -------------------------------------------------- $ script/generate integration_test create_blog_and_then_post_comments exists test/integration/ create test/integration/create_blog_and_then_post_comments_test.rb -------------------------------------------------- [source,ruby] -------------------------------------------------- require 'test_helper' class CreateBlogAndThenPostCommentsTest < ActionController::IntegrationTest # fixtures :your, :models # Replace this with your real tests. def test_truth assert true end end -------------------------------------------------- === Differences in comparison to unit and functional tests === * You will have to include fixtures explicitly unlike unit and functional tests in which all the fixtures are loaded by default (through test_helper) * Additional helpers: https?, https!, host!, follow_redirect!, post/get_via_redirect, open_session, reset == Guide TODO == * What to test in unit tests * Testing views (assert_select) * Examples for integration test * Updating Rake tasks * Update sectino on testing file uploads * Updating the section on testing mailers == Rake tasks related to testing rake db:test:* rake test rake test:units rake test:functionals rake test:integration rake test:plugin == Testing Your Mailers == === Keeping the postman in check === Your ActionMailer -- like every other part of your Rails application -- should be tested to ensure that it is working as expected. The goal of testing your ActionMailer is to ensure that: * emails are being processed (created and sent) * the email content is correct (subject, sender, body, etc) * the right emails are being sent at the righ times ==== From all sides ==== There are two aspects of testing your mailer, the unit tests and the functional tests. Unit tests In the unit tests, we run the mailer in isolation with tightly controlled inputs and compare the output to a known-value -- a fixture -- yay! more fixtures! ==== Functional tests ==== In the functional tests we don't so much test the minute details produced by the mailer, instead we test that our controllers and models are using the mailer in the right way. We test to prove that the right email was sent at the right time. === Unit Testing === In order to test that your mailer is working as expected, we can use unit tests to compare the actual results of the mailer with pre-writen examples of what should be produced. ==== Revenge of the fixtures ==== For the purposes of unit testing a mailer, fixtures are used to provide an example of how output ``should'' look. Because these are example emails, and not Active Record data like the other fixtures, they are kept in their own subdirectory from the other fixtures. Don't tease them about it though, they hate that. When you generated your mailer (you did that right?) the generator created stub fixtures for each of the mailers actions. If you didn't use the generator you'll have to make those files yourself. ==== The basic test case ==== Here is an example of what you start with. [source, ruby] ------------------------------------------------- require File.dirname(__FILE__) + '/. ./test_helper' class MyMailerTest < Test::Unit::TestCase FIXTURES_PATH = File.dirname(__FILE__) + '/. ./fixtures' def setup ActionMailer::Base.delivery_method = :test ActionMailer::Base.perform_deliveries = true ActionMailer::Base.deliveries = [] @expected = TMail::Mail.new end def test_signup @expected.subject = 'MyMailer#signup' @expected.body = read_fixture('signup') @expected.date = Time.now assert_equal @expected.encoded, MyMailer.create_signup(@expected.date).encoded end private def read_fixture(action) IO.readlines("#{FIXTURES_PATH}/my_mailer/#{action}") end end ------------------------------------------------- The `setup` method is mostly concerned with setting up a blank slate for the next test. However it is worth describing what each statement does [source, ruby] ------------------------------------------------- ActionMailer::Base.delivery_method = :test ------------------------------------------------- sets the delivery method to test mode so that email will not actually be delivered (useful to avoid spamming your users while testing) but instead it will be appended to an array (ActionMailer::Base.deliveries). [source, ruby] ------------------------------------------------- ActionMailer::Base.perform_deliveries = true ------------------------------------------------- Ensures the mail will be sent using the method specified by ActionMailer::Base.delivery_method, and finally [source, ruby] ------------------------------------------------- ActionMailer::Base.deliveries = [] ------------------------------------------------- sets the array of sent messages to an empty array so we can be sure that anything we find there was sent as part of our current test. However often in unit tests, mails will not actually be sent, simply constructed, as in the example above, where the precise content of the email is checked against what it should be. Dave Thomas suggests an alternative approach, which is just to check the part of the email that is likely to break, i.e. the dynamic content. The following example assumes we have some kind of user table, and we might want to mail those users new passwords: [source, ruby] ------------------------------------------------- require File.dirname(__FILE__) + '/../test_helper' require 'my_mailer' class MyMailerTest < Test::Unit::TestCase fixtures :users FIXTURES_PATH = File.dirname(__FILE__) + '/../fixtures' CHARSET = "utf-8" include ActionMailer::Quoting def setup ActionMailer::Base.delivery_method = :test ActionMailer::Base.perform_deliveries = true ActionMailer::Base.deliveries = [] @expected = TMail::Mail.new @expected.set_content_type "text", "plain", { "charset" => CHARSET } end def test_reset_password user = User.find(:first) newpass = 'newpass' response = MyMailer.create_reset_password(user,newpass) assert_equal 'Your New Password', response.subject assert_match /Dear #{user.full_name},/, response.body assert_match /New Password: #{newpass}/, response.body assert_equal user.email, response.to[0] end private def read_fixture(action) IO.readlines("#{FIXTURES_PATH}/community_mailer/#{action}") end def encode(subject) quoted_printable(subject, CHARSET) end end ------------------------------------------------- and here we check the dynamic parts of the mail, specifically that we use the users' correct full name and that we give them the correct password. === Functional Testing === Functional testing involves more than just checking that the email body, recipients and so forth are correct. In functional mail tests we call the mail deliver methods and check that the appropriate emails have been appended to the delivery list. It is fairly safe to assume that the deliver methods themselves do their job -- what we are probably more interested in is whether our own business logic is sending emails when we expect them to. For example the password reset operation we used an example in the previous section will probably be called in response to a user requesting a password reset through some sort of controller. [source, ruby] ---------------------------------------------------------------- require File.dirname(__FILE__) + '/../test_helper' require 'my_controller' # Raise errors beyond the default web-based presentation class MyController; def rescue_action(e) raise e end; end class MyControllerTest < Test::Unit::TestCase def setup @controller = MyController.new @request, @response = ActionController::TestRequest.new, ActionController::TestResponse.new end def test_reset_password num_deliveries = ActionMailer::Base.deliveries.size post :reset_password, :email => 'bob@test.com' assert_equal num_deliveries+1, ActionMailer::Base.deliveries.size end end ---------------------------------------------------------------- === Filtering emails in development === Sometimes you want to be somewhere inbetween the `:test` and `:smtp` settings. Say you're working on your development site, and you have a few testers working with you. The site isn't in production yet, but you'd like the testers to be able to receive emails from the site, but no one else. Here's a handy way to handle that situation, add this to your 'environment.rb' or 'development.rb' file [source, ruby] ---------------------------------------------------------------- class ActionMailer::Base def perform_delivery_fixed_email(mail) destinations = mail.destinations if destinations.nil? destinations = ["mymail@me.com"] mail.subject = '[TEST-FAILURE]:'+mail.subject else mail.subject = '[TEST]:'+mail.subject end approved = ["testerone@me.com","testertwo@me.com"] destinations = destinations.collect{|x| approved.collect{|y| (x==y ? x : nil)}}.flatten.compact mail.to = destinations if destinations.size > 0 mail.ready_to_send Net::SMTP.start(server_settings[:address], server_settings[:port], server_settings[:domain], server_settings[:user_name], server_settings[:password], server_settings[:authentication]) do |smtp| smtp.sendmail(mail.encoded, mail.from, destinations) end end end end ----------------------------------------------------------------