The Rails Internationalization API
The Ruby I18n gem which is shipped with Ruby on Rails (starting from Rails 2.2) provides an easy-to-use and extensible framework for translating your application to a single custom language other than English or providing multi-language support in your application.
1. How I18n in Ruby on Rails works
Internationalization is a complex problem. Natural languages differ in so many ways that it is hard to provide tools for solving all problems at once. For that reason the Rails I18n API focusses on:
-
providing support for English and similar languages out of the box
-
making it easy to customize and extend everything for other languages
1.1. The overall architecture of the library
Thus, the Ruby I18n gem is split into two parts:
-
The public API which is just a Ruby module with a bunch of public methods and definitions how the library works.
-
A shipped backend (which is intentionally named the Simple backend) that implements these methods.
As a user you should always only access the public methods on the I18n module but it is useful to know about the capabilities of the backend you use and maybe exchange the shipped Simple backend with a more powerful one.
1.2. The public I18n API
We will go into more detail about the public methods later but here’s a quick overview. The most important methods are:
translate # lookup translations localize # localize Date and Time objects to local formats
These have the aliases #t and #l so you can use them like this:
I18n.t 'store.title' I18n.l Time.now
There are also attribute readers and writers for the following attributes:
load_path # announce your custom translation files locale # get and set the current locale default_locale # get and set the default locale exception_handler # use a different exception_handler backend # use a different backend
2. Walkthrough: setup a simple I18n’ed Rails application
There are just a few, simple steps to get up and running with a I18n support for your application.
2.1. Configure the I18n module
Rails will wire up all required settings for you with sane defaults. If you need different settings you can overwrite them easily.
The I18n library will use English (:en) as a default locale by default. I.e if you don’t set a different locale, :en will be used for looking up translations. Also, Rails adds all files from config/locales/*.rb,yml to your translations load path.
The translations load path (I18n.load_path) is just a Ruby Array of paths to your translation files that will be loaded automatically and available in your application. You can pick whatever directory and translation file naming scheme makes sense for you.
(Hint: The backend will lazy-load these translations when a translation is looked up for the first time. This makes it possible to just swap the backend with something else even after translations have already been announced.)
The default environment.rb says:
# The internationalization framework can be changed # to have another default locale (standard is :en) or more load paths. # All files from config/locales/*.rb,yml are added automatically. # config.i18n.load_path << Dir[File.join(RAILS_ROOT, 'my', 'locales', '*.{rb,yml}')] # config.i18n.default_locale = :de
2.2. Optional: custom I18n configuration setup
For the sake of completeness let’s mention that if you do not want to use the environment for some reason you can always wire up things manually, too.
To tell the I18n library where it can find your custom translation files you can specify the load path anywhere in your application - just make sure it gets run before any translations are actually looked up. You might also want to change the default locale. The simplest thing possible is to put the following into an initializer:
# in config/initializer/locale.rb # tell the I18n library where to find your translations I18n.load_path += Dir[ File.join(RAILS_ROOT, 'lib', 'locale', '*.{rb,yml}') ] # you can omit this if you're happy with English as a default locale I18n.default_locale = :pt
2.3. Set the locale in each request
By default the I18n library will use :en (English) as a I18n.default_locale for looking up translations (if you do not specify a locale for a lookup).
If you want to translate your Rails application to a single language other than English you can set I18n.default_locale to your locale. If you want to change the locale on a per-request basis though you can set it in a before_filter on the ApplicationController like this:
before_filter :set_locale def set_locale # if this is nil then I18n.default_locale will be used I18n.locale = params[:locale] end
This will already work for URLs where you pass the locale as a query parameter as in example.com?locale=pt (which is what Google also does).
![]() |
For other URL designs, see How to encode the current locale in the URL. |
Now you’ve initialized I18n support for your application and told it which locale should be used. With that in place you’re now ready for the really interesting stuff.
3. Internationalize your application
The process of "internationalization" usually means to abstract all strings and other locale specific bits out of your application. The process of "localization" means to then provide translations and localized formats for these bits. [1]
So, let’s internationalize something. You most probably have something like this in one of your applications:
# config/routes.rb ActionController::Routing::Routes.draw do |map| map.root :controller => 'home', :action => 'index' end # app/controllers/home_controller.rb class HomeController < ApplicationController def index flash[:notice] = "Hello flash!" end end # app/views/home/index.html.erb <h1>Hello world!</h1> <p><%= flash[:notice] %></p>
3.1. Adding Translations
Obviously there are two strings that are localized to English. In order to internationalize this code replace these strings with calls to Rails' #t helper with a key that makes sense for the translation:
# app/controllers/home_controller.rb class HomeController < ApplicationController def index flash[:notice] = t(:hello_flash) end end # app/views/home/index.html.erb <h1><%=t :hello_world %></h1> <p><%= flash[:notice] %></p>
When you now render this view it will show an error message that tells you that the translations for the keys :hello_world and :hello_flash are missing.
![]() |
Rails adds a t (translate) helper method to your views so that you do not need to spell out I18n.t all the time. Additionally this helper will catch missing translations and wrap the resulting error message into a <span class="translation_missing">. |
So let’s add the missing translations (i.e. do the "localization" part):
# config/locale/en.yml en: hello_world: Hello World hello_flash: Hello Flash # config/locale/pirate.yml pirate: hello_world: Ahoy World hello_flash: Ahoy Flash
There you go. Because you haven’t changed the default_locale I18n will use English. Your application now shows:
And when you change the URL to pass the pirate locale you get:
NOTE You need to restart the server when you add new locale files.
3.2. Adding Date/Time formats
Ok, let’s add a timestamp to the view so we can demo the date/time localization feature as well. To localize the time format you pass the Time object to I18n.l or (preferably) use Rails' #l helper. You can pick a format by passing the :format option, by default the :default format is used.
# app/views/home/index.html.erb <h1><%=t :hello_world %></h1> <p><%= flash[:notice] %></p <p><%= l Time.now, :format => :short %></p>
And in our pirate translations file let’s add a time format (it’s already there in Rails' defaults for English):
# config/locale/pirate.yml pirate: time: formats: short: "arrrround %H'ish"
So that would give you:
NOTE Right now you might need to add some more date/time formats in order to make the I18n backend work as expected. See the rails-i18n repository for starting points.
4. Overview of the I18n API features
The following purposes are covered:
-
lookup translations
-
interpolate data into translations
-
pluralize translations
-
localize dates, numbers, currency etc.
4.1. Looking up translations
4.1.1. Basic lookup, scopes and nested keys
Translations are looked up by keys which can be both Symbols or Strings, so these calls are equivalent:
I18n.t :message I18n.t 'message'
translate also takes a :scope option which can contain one or many additional keys that will be used to specify a “namespace” or scope for a translation key:
I18n.t :invalid, :scope => [:active_record, :error_messages]
This looks up the :invalid message in the ActiveRecord error messages.
Additionally, both the key and scopes can be specified as dot separated keys as in:
I18n.translate :"active_record.error_messages.invalid"
Thus the following calls are equivalent:
I18n.t 'active_record.error_messages.invalid' I18n.t 'error_messages.invalid', :scope => :active_record I18n.t :invalid, :scope => 'active_record.error_messages' I18n.t :invalid, :scope => [:active_record, :error_messages]
4.1.2. Defaults
When a default option is given its value will be returned if the translation is missing:
I18n.t :missing, :default => 'Not here' # => 'Not here'
If the default value is a Symbol it will be used as a key and translated. One can provide multiple values as default. The first one that results in a value will be returned.
E.g. the following first tries to translate the key :missing and then the key :also_missing. As both do not yield a result the string "Not here" will be returned:
I18n.t :missing, :default => [:also_missing, 'Not here'] # => 'Not here'
4.1.3. Bulk and namespace lookup
To lookup multiple translations at once an array of keys can be passed:
I18n.t [:odd, :even], :scope => 'active_record.error_messages' # => ["must be odd", "must be even"]
Also, a key can translate to a (potentially nested) hash as grouped translations. E.g. one can receive all ActiveRecord error messages as a Hash with:
I18n.t 'active_record.error_messages' # => { :inclusion => "is not included in the list", :exclusion => ... }
4.2. Interpolation
In many cases you want to abstract your translations so that variables can be interpolated into the translation. For this reason the I18n API provides an interpolation feature.
All options besides :default and :scope that are passed to #translate will be interpolated to the translation:
I18n.backend.store_translations :en, :thanks => 'Thanks {{name}}!' I18n.translate :thanks, :name => 'Jeremy' # => 'Thanks Jeremy!'
If a translation uses :default or :scope as a interpolation variable an I18n::ReservedInterpolationKey exception is raised. If a translation expects an interpolation variable but it has not been passed to #translate an I18n::MissingInterpolationArgument exception is raised.
4.3. Pluralization
In English there’s only a singular and a plural form for a given string, e.g. "1 message" and "2 messages". Other languages (Arabic, Japanese, Russian and many more) have different grammars that have additional or less plural forms. Thus, the I18n API provides a flexible pluralization feature.
The :count interpolation variable has a special role in that it both is interpolated to the translation and used to pick a pluralization from the translations according to the pluralization rules defined by CLDR:
I18n.backend.store_translations :en, :inbox => { :one => '1 message', :other => '{{count}} messages' } I18n.translate :inbox, :count => 2 # => '2 messages'
The algorithm for pluralizations in :en is as simple as:
entry[count == 1 ? 0 : 1]
I.e. the translation denoted as :one is regarded as singular, the other is used as plural (including the count being zero).
If the lookup for the key does not return an Hash suitable for pluralization an I18n::InvalidPluralizationData exception is raised.
4.4. Setting and passing a locale
The locale can be either set pseudo-globally to I18n.locale (which uses Thread.current like, e.g., Time.zone) or can be passed as an option to #translate and #localize.
If no locale is passed I18n.locale is used:
I18n.locale = :de I18n.t :foo I18n.l Time.now
Explicitely passing a locale:
I18n.t :foo, :locale => :de I18n.l Time.now, :locale => :de
I18n.locale defaults to I18n.default_locale which defaults to :en. The default locale can be set like this:
I18n.default_locale = :de
5. How to store your custom translations
The shipped Simple backend allows you to store translations in both plain Ruby and YAML format. [2]
For example a Ruby Hash providing translations can look like this:
{ :pt => { :foo => { :bar => "baz" } } }
The equivalent YAML file would look like this:
pt: foo: bar: baz
As you see in both cases the toplevel key is the locale. :foo is a namespace key and :bar is the key for the translation "baz".
Here is a "real" example from the ActiveSupport en.yml translations YAML file:
en: date: formats: default: "%Y-%m-%d" short: "%b %d" long: "%B %d, %Y"
So, all of the following equivalent lookups will return the :short date format "%B %d":
I18n.t 'date.formats.short' I18n.t 'formats.short', :scope => :date I18n.t :short, :scope => 'date.formats' I18n.t :short, :scope => [:date, :formats]
Generally we recommend using YAML as a format for storing translations. There are cases though where you want to store Ruby lambdas as part of your locale data, e.g. for special date
5.1. Translations for ActiveRecord models
You can use the methods Model.human_name and Model.human_attribute_name(attribute) to transparently lookup translations for your model and attribute names.
For example when you add the following translations:
en: activerecord: models: user: Dude attributes: user: login: "Handle" # will translate User attribute "login" as "Handle"
Then User.human_name will return "Dude" and User.human_attribute_name(:login) will return "Handle".
5.1.1. Error message scopes
ActiveRecord validation error messages can also be translated easily. ActiveRecord gives you a couple of namespaces where you can place your message translations in order to provide different messages and translation for certain models, attributes and/or validations. It also transparently takes single table inheritance into account.
This gives you quite powerful means to flexibly adjust your messages to your application’s needs.
Consider a User model with a validates_presence_of validation for the name attribute like this:
class User < ActiveRecord::Base validates_presence_of :name end
The key for the error message in this case is :blank. ActiveRecord will lookup this key in the namespaces:
activerecord.errors.messages.models.[model_name].attributes.[attribute_name] activerecord.errors.messages.models.[model_name] activerecord.errors.messages
Thus, in our example it will try the following keys in this order and return the first result:
activerecord.errors.messages.models.user.attributes.name.blank activerecord.errors.messages.models.user.blank activerecord.errors.messages.blank
When your models are additionally using inheritance then the messages are looked up for the inherited model class names are looked up.
For example, you might have an Admin model inheriting from User:
class Admin < User validates_presence_of :name end
Then ActiveRecord will look for messages in this order:
activerecord.errors.models.admin.attributes.title.blank activerecord.errors.models.admin.blank activerecord.errors.models.user.attributes.title.blank activerecord.errors.models.user.blank activerecord.errors.messages.blank
This way you can provide special translations for various error messages at different points in your models inheritance chain and in the attributes, models or default scopes.
5.1.2. Error message interpolation
The translated model name and translated attribute name are always available for interpolation.
count and/or value are available where applicable. Count can be used for pluralization if present:
validation |
with option |
message |
interpolation |
validates_confirmation_of |
- |
:confirmation |
- |
validates_acceptance_of |
- |
:accepted |
- |
validates_presence_of |
- |
:blank |
- |
validates_length_of |
:within, :in |
:too_short |
count |
validates_length_of |
:within, :in |
:too_long |
count |
validates_length_of |
:is |
:wrong_length |
count |
validates_length_of |
:minimum |
:too_short |
count |
validates_length_of |
:maximum |
:too_long |
count |
validates_uniqueness_of |
- |
:taken |
value |
validates_format_of |
- |
:invalid |
value |
validates_inclusion_of |
- |
:inclusion |
value |
validates_exclusion_of |
- |
:exclusion |
value |
validates_associated |
- |
:invalid |
value |
validates_numericality_of |
- |
:not_a_number |
value |
validates_numericality_of |
:odd |
:odd |
value |
validates_numericality_of |
:even |
:even |
value |
5.1.3. Translations for the ActiveRecord error_messages_for helper
If you are using the ActiveRecord error_messages_for helper you will want to add translations for it.
Rails ships with the following translations:
en: activerecord: errors: template: header: one: "1 error prohibited this {{model}} from being saved" other: "{{count}} errors prohibited this {{model}} from being saved" body: "There were problems with the following fields:"
5.2. Other translations and localizations
Rails uses fixed strings and other localizations, such as format strings and other format information in a couple of helpers.
TODO list helpers and available keys
6. Customize your I18n setup
6.1. Using different backends
For several reasons the shipped Simple backend only does the "simplest thing that ever could work" for Ruby on Rails [3] ... which means that it is only guaranteed to work for English and, as a side effect, languages that are very similar to English. Also, the simple backend is only capable of reading translations but can not dynamically store them to any format.
That does not mean you’re stuck with these limitations though. The Ruby I18n gem makes it very easy to exchange the Simple backend implementation with something else that fits better for your needs. E.g. you could exchange it with Globalize’s Static backend:
I18n.backend = Globalize::Backend::Static.new
6.2. Using different exception handlers
The I18n API defines the following exceptions that will be raised by backends when the corresponding unexpected conditions occur:
MissingTranslationData # no translation was found for the requested key InvalidLocale # the locale set to I18n.locale is invalid (e.g. nil) InvalidPluralizationData # a count option was passed but the translation data is not suitable for pluralization MissingInterpolationArgument # the translation expects an interpolation argument that has not been passed ReservedInterpolationKey # the translation contains a reserved interpolation variable name (i.e. one of: scope, default) UnknownFileType # the backend does not know how to handle a file type that was added to I18n.load_path
The I18n API will catch all of these exceptions when they were thrown in the backend and pass them to the default_exception_handler method. This method will re-raise all exceptions except for MissingTranslationData exceptions. When a MissingTranslationData exception has been caught it will return the exception’s error message string containing the missing key/scope.
The reason for this is that during development you’d usually want your views to still render even though a translation is missing.
In other contexts you might want to change this behaviour though. E.g. the default exception handling does not allow to catch missing translations during automated tests easily. For this purpose a different exception handler can be specified. The specified exception handler must be a method on the I18n module:
module I18n def just_raise_that_exception(*args) raise args.first end end I18n.exception_handler = :just_raise_that_exception
This would re-raise all caught exceptions including MissingTranslationData.
Another example where the default behaviour is less desirable is the Rails TranslationHelper which provides the method #t (as well as #translate). When a MissingTranslationData exception occurs in this context the helper wraps the message into a span with the css class translation_missing.
To do so the helper forces I18n#translate to raise exceptions no matter what exception handler is defined by setting the :raise option:
I18n.t :foo, :raise => true # always re-raises exceptions from the backend
7. Resources
8. Footnotes
[1] Or, to quote Wikipedia: "Internationalization is the process of designing a software application so that it can be adapted to various languages and regions without engineering changes. Localization is the process of adapting software for a specific region or language by adding locale-specific components and translating text."
[2] Other backends might allow or require to use other formats, e.g. a GetText backend might allow to read GetText files.
[3] One of these reasons is that we don’t want to any unnecessary load for applications that do not need any I18n capabilities, so we need to keep the I18n library as simple as possible for English. Another reason is that it is virtually impossible to implement a one-fits-all solution for all problems related to I18n for all existing languages. So a solution that allows us to exchange the entire implementation easily is appropriate anyway. This also makes it much easier to experiment with custom features and extensions.
9. Credits
10. NOTES
How to contribute?