From 71df60e921a784fb01729e98fa9636a4b6862d72 Mon Sep 17 00:00:00 2001
From: Matthew Draper <matthew@trebex.net>
Date: Mon, 28 Nov 2016 05:59:55 +1030
Subject: Rearrange npm release process again

Make prep_release idempotent, including the npm bump.
---
 tasks/release.rb | 83 ++++++++++++++++++++++++++++----------------------------
 1 file changed, 41 insertions(+), 42 deletions(-)

(limited to 'tasks')

diff --git a/tasks/release.rb b/tasks/release.rb
index 25269fb7db..d394b181c3 100644
--- a/tasks/release.rb
+++ b/tasks/release.rb
@@ -8,6 +8,18 @@ gem_version = Gem::Version.new(version)
 
 directory "pkg"
 
+# This "npm-ifies" the current version number
+# With npm, versions such as "5.0.0.rc1" or "5.0.0.beta1.1" are not compliant with its
+# versioning system, so they must be transformed to "5.0.0-rc1" and "5.0.0-beta1-1" respectively.
+
+# "5.0.1"     --> "5.0.1"
+# "5.0.1.1"   --> "5.0.1-1" *
+# "5.0.0.rc1" --> "5.0.0-rc1"
+#
+# * This makes it a prerelease. That's bad, but we haven't come up with
+# a better solution at the moment.
+npm_version = version.gsub(/\./).with_index { |s, i| i >= 2 ? "-" : s }
+
 (FRAMEWORKS + ["rails"]).each do |framework|
   namespace framework do
     gem     = "pkg/#{framework}-#{version}.gem"
@@ -45,6 +57,17 @@ directory "pkg"
       raise "Could not insert PRE in #{file}" unless $1
 
       File.open(file, "w") { |f| f.write ruby }
+
+      require "json"
+      if File.exist?("#{framework}/package.json") && JSON.parse(File.read("#{framework}/package.json"))["version"] != npm_version
+        Dir.chdir("#{framework}") do
+          if sh "which npm"
+            sh "npm version #{npm_version} --no-git-tag-version"
+          else
+            raise "You must have npm installed to release Rails."
+          end
+        end
+      end
     end
 
     task gem => %w(update_versions pkg) do
@@ -63,38 +86,10 @@ directory "pkg"
     task push: :build do
       sh "gem push #{gem}"
 
-      # When running the release task we usually run build first to check that the gem works properly.
-      # NPM will refuse to publish or rebuild the gem if the version is changed when the Rails gem
-      # versions are changed. This then causes the gem push to fail. Because of this we need to update
-      # the version and publish at the same time.
       if File.exist?("#{framework}/package.json")
         Dir.chdir("#{framework}") do
-          # This "npm-ifies" the current version
-          # With npm, versions such as "5.0.0.rc1" or "5.0.0.beta1.1" are not compliant with its
-          # versioning system, so they must be transformed to "5.0.0-rc1" and "5.0.0-beta1-1" respectively.
-
-          # In essence, the code below runs through all "."s that appear in the version,
-          # and checks to see if their index in the version string is greater than or equal to 2,
-          # and if so, it will change the "." to a "-".
-
-          # Sample version transformations:
-          # irb(main):001:0> version = "5.0.1.1"
-          # => "5.0.1.1"
-          # irb(main):002:0> version.gsub(/\./).with_index { |s, i| i >= 2 ? '-' : s }
-          # => "5.0.1-1"
-          # irb(main):003:0> version = "5.0.0.rc1"
-          # => "5.0.0.rc1"
-          # irb(main):004:0> version.gsub(/\./).with_index { |s, i| i >= 2 ? '-' : s }
-          # => "5.0.0-rc1"
-          npm_version = version.gsub(/\./).with_index { |s, i| i >= 2 ? "-" : s }
-
-          # Check if npm is installed, and raise an error if not
-          if sh "which npm"
-            sh "npm version #{npm_version} --no-git-tag-version"
-            sh "npm publish"
-          else
-            raise "You must have npm installed to release Rails."
-          end
+          npm_tag = version =~ /[a-z]/ ? "pre" : "latest"
+          sh "npm publish --tag #{npm_tag}"
         end
       end
     end
@@ -106,9 +101,11 @@ namespace :changelog do
     (FRAMEWORKS + ["guides"]).each do |fw|
       require "date"
       fname = File.join fw, "CHANGELOG.md"
+      current_contents = File.read(fname)
 
-      header = "## Rails #{version} (#{Date.today.strftime('%B %d, %Y')}) ##\n\n*   No changes.\n\n\n"
-      contents = header + File.read(fname)
+      header = "## Rails #{version} (#{Date.today.strftime('%B %d, %Y')}) ##\n\n"
+      header << "*   No changes.\n\n\n" if current_contents =~ /\A##/
+      contents = header + current_contents
       File.open(fname, "wb") { |f| f.write contents }
     end
   end
@@ -145,7 +142,7 @@ namespace :all do
   task push: FRAMEWORKS.map { |f| "#{f}:push"            } + ["rails:push"]
 
   task :ensure_clean_state do
-    unless `git status -s | grep -v 'RAILS_VERSION\\|CHANGELOG\\|Gemfile.lock'`.strip.empty?
+    unless `git status -s | grep -v 'RAILS_VERSION\\|CHANGELOG\\|Gemfile.lock\\|package.json\\|version.rb'`.strip.empty?
       abort "[ABORTING] `git status` reports a dirty tree. Make sure all changes are committed"
     end
 
@@ -160,14 +157,16 @@ namespace :all do
   end
 
   task :commit do
-    File.open("pkg/commit_message.txt", "w") do |f|
-      f.puts "# Preparing for #{version} release\n"
-      f.puts
-      f.puts "# UNCOMMENT THE LINE ABOVE TO APPROVE THIS COMMIT"
-    end
+    unless `git status -s`.strip.empty?
+      File.open("pkg/commit_message.txt", "w") do |f|
+        f.puts "# Preparing for #{version} release\n"
+        f.puts
+        f.puts "# UNCOMMENT THE LINE ABOVE TO APPROVE THIS COMMIT"
+      end
 
-    sh "git add . && git commit --verbose --template=pkg/commit_message.txt"
-    rm_f "pkg/commit_message.txt"
+      sh "git add . && git commit --verbose --template=pkg/commit_message.txt"
+      rm_f "pkg/commit_message.txt"
+    end
   end
 
   task :tag do
@@ -175,9 +174,9 @@ namespace :all do
     sh "git push --tags"
   end
 
-  task prep_release: %w(ensure_clean_state build)
+  task prep_release: %w(ensure_clean_state build bundle commit)
 
-  task release: %w(ensure_clean_state build bundle commit tag push)
+  task release: %w(prep_release tag push)
 end
 
 task :announce do
-- 
cgit v1.2.3