Debugging Rails Applications

This guide introduces techniques for debugging Ruby on Rails applications. By referring to this guide, you will be able to:

+
+Understand the purpose of debugging +
+
+
+Track down problems and issues in your application that your tests aren't identifying +
+
+
+Learn the different ways of debugging +
+
+
+Analyze the stack trace +
+

1. View Helpers for Debugging

One common task is to inspect the contents of a variable. In Rails, you can do this with three methods:

+
+debug +
+
+
+to_yaml +
+
+
+inspect +
+

1.1. debug

The debug helper will return a <pre>-tag that renders the object using the YAML format. This will generate human-readable data from any object. For example, if you have this code in a view:

<%= debug @post %>
+<p>
+  <b>Title:</b>
+  <%=h @post.title %>
+</p>
+

You'll see something like this:

--- !ruby/object:Post
+attributes:
+  updated_at: 2008-09-05 22:55:47
+  body: It's a very helpful guide for debugging your Rails app.
+  title: Rails debugging guide
+  published: t
+  id: "1"
+  created_at: 2008-09-05 22:55:47
+attributes_cache: {}
+
+
+Title: Rails debugging guide
+

1.2. to_yaml

Displaying an instance variable, or any other object or method, in yaml format can be achieved this way:

<%= simple_format @post.to_yaml %>
+<p>
+  <b>Title:</b>
+  <%=h @post.title %>
+</p>
+

The to_yaml method converts the method to YAML format leaving it more readable, and then the simple_format helper is used to render each line as in the console. This is how debug method does its magic.

As a result of this, you will have something like this in your view:

--- !ruby/object:Post
+attributes:
+updated_at: 2008-09-05 22:55:47
+body: It's a very helpful guide for debugging your Rails app.
+title: Rails debugging guide
+published: t
+id: "1"
+created_at: 2008-09-05 22:55:47
+attributes_cache: {}
+
+Title: Rails debugging guide
+

1.3. inspect

Another useful method for displaying object values is inspect, especially when working with arrays or hashes. This will print the object value as a string. For example:

<%= [1, 2, 3, 4, 5].inspect %>
+<p>
+  <b>Title:</b>
+  <%=h @post.title %>
+</p>
+

Will be rendered as follows:

[1, 2, 3, 4, 5]
+
+Title: Rails debugging guide
+

2. The Logger

It can also be useful to save information to log files at runtime. Rails maintains a separate log file for each runtime environment.

2.1. What is The Logger?

Rails makes use of Ruby's standard logger to write log information. You can also substitute another logger such as Log4R if you wish.

You can specify an alternative logger in your environment.rb or any environment file:

ActiveRecord::Base.logger = Logger.new(STDOUT)
+ActiveRecord::Base.logger = Log4r::Logger.new("Application Log")
+

Or in the Initializer section, add any of the following

config.logger = Logger.new(STDOUT)
+config.logger = Log4r::Logger.new("Application Log")
+

+ + + +

+ +	By default, each log is created under `RAILS_ROOT/log/` and the log file name is `environment_name.log`.

2.2. Log Levels

When something is logged it's printed into the corresponding log if the log level of the message is equal or higher than the configured log level. If you want to know the current log level you can call the ActiveRecord::Base.logger.level method.

The available log levels are: :debug, :info, :warn, :error, and :fatal, corresponding to the log level numbers from 0 up to 4 respectively. To change the default log level, use

config.log_level = Logger::WARN # In any environment initializer, or
+ActiveRecord::Base.logger.level = 0 # at any time
+

This is useful when you want to log under development or staging, but you don't want to flood your production log with unnecessary information.

+ + + +

+ +	The default Rails log level is `info` in production mode and `debug` in development and test mode.

2.3. Sending Messages

To write in the current log use the logger.(debug|info|warn|error|fatal) method from within a controller, model or mailer:

logger.debug "Person attributes hash: #{@person.attributes.inspect}"
+logger.info "Processing the request..."
+logger.fatal "Terminating application, raised unrecoverable error!!!"
+

Here's an example of a method instrumented with extra logging:

class PostsController < ApplicationController
+  # ...
+
+  def create
+    @post = Post.new(params[:post])
+    logger.debug "New post: #{@post.attributes.inspect}"
+    logger.debug "Post should be valid: #{@post.valid?}"
+
+    if @post.save
+      flash[:notice] = 'Post was successfully created.'
+      logger.debug "The post was saved and now is the user is going to be redirected..."
+      redirect_to(@post)
+    else
+      render :action => "new"
+    end
+  end
+
+  # ...
+end
+

Here's an example of the log generated by this method:

Processing PostsController#create (for 127.0.0.1 at 2008-09-08 11:52:54) [POST]
+  Session ID: BAh7BzoMY3NyZl9pZCIlMDY5MWU1M2I1ZDRjODBlMzkyMWI1OTg2NWQyNzViZjYiCmZsYXNoSUM6J0FjdGl
+vbkNvbnRyb2xsZXI6OkZsYXNoOjpGbGFzaEhhc2h7AAY6CkB1c2VkewA=--b18cd92fba90eacf8137e5f6b3b06c4d724596a4
+  Parameters: {"commit"=>"Create", "post"=>{"title"=>"Debugging Rails",
+ "body"=>"I'm learning how to print in logs!!!", "published"=>"0"},
+ "authenticity_token"=>"2059c1286e93402e389127b1153204e0d1e275dd", "action"=>"create", "controller"=>"posts"}
+New post: {"updated_at"=>nil, "title"=>"Debugging Rails", "body"=>"I'm learning how to print in logs!!!",
+ "published"=>false, "created_at"=>nil}
+Post should be valid: true
+  Post Create (0.000443)   INSERT INTO "posts" ("updated_at", "title", "body", "published",
+ "created_at") VALUES('2008-09-08 14:52:54', 'Debugging Rails',
+ 'I''m learning how to print in logs!!!', 'f', '2008-09-08 14:52:54')
+The post was saved and now is the user is going to be redirected...
+Redirected to #<Post:0x20af760>
+Completed in 0.01224 (81 reqs/sec) | DB: 0.00044 (3%) | 302 Found [http://localhost/posts]
+

Adding extra logging like this makes it easy to search for unexpected or unusual behavior in your logs. If you add extra logging, be sure to make sensible use of log levels, to avoid filling your production logs with useless trivia.

3. Debugging with ruby-debug

When your code is behaving in unexpected ways, you can try printing to logs or the console to diagnose the problem. Unfortunately, there are times when this sort of error tracking is not effective in finding the root cause of a problem. When you actually need to journey into your running source code, the debugger is your best companion.

The debugger can also help you if you want to learn about the Rails source code but don't know where to start. Just debug any request to your application and use this guide to learn how to move from the code you have written deeper into Rails code.

3.1. Setup

The debugger used by Rails, ruby-debug, comes as a gem. To install it, just run:

$ sudo gem install ruby-debug
+

In case you want to download a particular version or get the source code, refer to the project's page on rubyforge.

Rails has had built-in support for ruby-debug since Rails 2.0. Inside any Rails application you can invoke the debugger by calling the debugger method.

Here's an example:

class PeopleController < ApplicationController
+  def new
+    debugger
+    @person = Person.new
+  end
+end
+

If you see the message in the console or logs:

***** Debugger requested, but was not available: Start server with --debugger to enable *****
+

Make sure you have started your web server with the option —debugger:

~/PathTo/rails_project$ script/server --debugger
+=> Booting Mongrel (use 'script/server webrick' to force WEBrick)
+=> Rails 2.2.0 application starting on http://0.0.0.0:3000
+=> Debugger enabled
+...
+

+ + + +

+ +	In development mode, you can dynamically `require 'ruby-debug'` instead of restarting the server, if it was started without `—debugger`.

In order to use Rails debugging you'll need to be running either WEBrick or Mongrel. For the moment, no alternative servers are supported.

3.2. The Shell

As soon as your application calls the debugger method, the debugger will be started in a debugger shell inside the terminal window where you launched your application server, and you will be placed at ruby-debug's prompt (rdb:n). The n is the thread number. The prompt will also show you the next line of code that is waiting to run.

If you got there by a browser request, the browser tab containing the request will be hung until the debugger has finished and the trace has finished processing the entire request.

For example:

@posts = Post.find(:all)
+(rdb:7)

Now it's time to play and dig into your application. A good place to start is by asking the debugger for help… so type: help (You didn't see that coming, right?)

(rdb:7) help
+ruby-debug help v0.10.2
+Type 'help <command-name>' for help on a specific command
+
+Available commands:
+backtrace  delete   enable  help    next  quit     show    trace
+break      disable  eval    info    p     reload   source  undisplay
+catch      display  exit    irb     pp    restart  step    up
+condition  down     finish  list    ps    save     thread  var
+continue   edit     frame   method  putl  set      tmate   where

+ + + +

+ +	To view the help menu for any command use `help <command-name>` in active debug mode. For example: `help var`

The next command to learn is one of the most useful: list. You can also abbreviate ruby-debug commands by supplying just enough letters to distinguish them from other commands, so you can also use l for the list command.

This command shows you where you are in the code by printing 10 lines centered around the current line; the current line in this particular case is line 6 and is marked by ⇒.

(rdb:7) list
+[1, 10] in /PathToProject/posts_controller.rb
+   1  class PostsController < ApplicationController
+   2    # GET /posts
+   3    # GET /posts.xml
+   4    def index
+   5      debugger
+=> 6      @posts = Post.find(:all)
+   7
+   8      respond_to do |format|
+   9        format.html # index.html.erb
+   10        format.xml  { render :xml => @posts }

If you repeat the list command, this time using just l, the next ten lines of the file will be printed out.

(rdb:7) l
+[11, 20] in /PathTo/project/app/controllers/posts_controller.rb
+   11      end
+   12    end
+   13
+   14    # GET /posts/1
+   15    # GET /posts/1.xml
+   16    def show
+   17      @post = Post.find(params[:id])
+   18
+   19      respond_to do |format|
+   20        format.html # show.html.erb

And so on until the end of the current file. When the end of file is reached, the list command will start again from the beginning of the file and continue again up to the end, treating the file as a circular buffer.

3.3. The Context

When you start debugging your application, you will be placed in different contexts as you go through the different parts of the stack.

ruby-debug creates a content when a stopping point or an event is reached. The context has information about the suspended program which enables a debugger to inspect the frame stack, evaluate variables from the perspective of the debugged program, and contains information about the place where the debugged program is stopped.

At any time you can call the backtrace command (or its alias where) to print the backtrace of the application. This can be very helpful to know how you got where you are. If you ever wondered about how you got somewhere in your code, then backtrace will supply the answer.

(rdb:5) where
+    #0 PostsController.index
+       at line /PathTo/project/app/controllers/posts_controller.rb:6
+    #1 Kernel.send
+       at line /PathTo/project/vendor/rails/actionpack/lib/action_controller/base.rb:1175
+    #2 ActionController::Base.perform_action_without_filters
+       at line /PathTo/project/vendor/rails/actionpack/lib/action_controller/base.rb:1175
+    #3 ActionController::Filters::InstanceMethods.call_filters(chain#ActionController::Fil...,...)
+       at line /PathTo/project/vendor/rails/actionpack/lib/action_controller/filters.rb:617
+...

You move anywhere you want in this trace (thus changing the context) by using the frame n command, where n is the specified frame number.

(rdb:5) frame 2
+#2 ActionController::Base.perform_action_without_filters
+       at line /PathTo/project/vendor/rails/actionpack/lib/action_controller/base.rb:1175

The available variables are the same as if you were running the code line by line. After all, that's what debugging is.

Moving up and down the stack frame: You can use up [n] (u for abbreviated) and down [n] commands in order to change the context n frames up or down the stack respectively. n defaults to one. Up in this case is towards higher-numbered stack frames, and down is towards lower-numbered stack frames.

3.4. Threads

The debugger can list, stop, resume and switch between running threads by using the command thread (or the abbreviated th). This command has a handful of options:

+
+thread shows the current thread. +
+
+
+thread list is used to list all threads and their statuses. The plus + character and the number indicates the current thread of execution. +
+
+
+thread stop n stop thread n. +
+
+
+thread resume n resumes thread n. +
+
+
+thread switch n switches the current thread context to n. +
+

This command is very helpful, among other occasions, when you are debugging concurrent threads and need to verify that there are no race conditions in your code.

3.5. Inspecting Variables

Any expression can be evaluated in the current context. To evaluate an expression, just type it!

This example shows how you can print the instance_variables defined within the current context:

@posts = Post.find(:all)
+(rdb:11) instance_variables
+["@_response", "@action_name", "@url", "@_session", "@_cookies", "@performed_render", "@_flash", "@template", "@_params", "@before_filter_chain_aborted", "@request_origin", "@_headers", "@performed_redirect", "@_request"]

As you may have figured out, all of the variables that you can access from a controller are displayed. This list is dynamically updated as you execute code. For example, run the next line using next (you'll learn more about this command later in this guide).

(rdb:11) next
+Processing PostsController#index (for 127.0.0.1 at 2008-09-04 19:51:34) [GET]
+  Session ID: BAh7BiIKZmxhc2hJQzonQWN0aW9uQ29udHJvbGxlcjo6Rmxhc2g6OkZsYXNoSGFzaHsABjoKQHVzZWR7AA==--b16e91b992453a8cc201694d660147bba8b0fd0e
+  Parameters: {"action"=>"index", "controller"=>"posts"}
+/PathToProject/posts_controller.rb:8
+respond_to do |format|

And then ask again for the instance_variables:

(rdb:11) instance_variables.include? "@posts"
+true

Now @posts is a included in the instance variables, because the line defining it was executed.

+ + + +

+ +	You can also step into irb mode with the command `irb` (of course!). This way an irb session will be started within the context you invoked it. But be warned: this is an experimental feature.

The var method is the most convenient way to show variables and their values:

var
+(rdb:1) v[ar] const <object>            show constants of object
+(rdb:1) v[ar] g[lobal]                  show global variables
+(rdb:1) v[ar] i[nstance] <object>       show instance variables of object
+(rdb:1) v[ar] l[ocal]                   show local variables

This is a great way to inspect the values of the current context variables. For example:

(rdb:9) var local
+  __dbg_verbose_save => false

You can also inspect for an object method this way:

(rdb:9) var instance Post.new
+@attributes = {"updated_at"=>nil, "body"=>nil, "title"=>nil, "published"=>nil, "created_at"...
+@attributes_cache = {}
+@new_record = true

+ + + +

+ +	The commands `p` (print) and `pp` (pretty print) can be used to evaluate Ruby expressions and display the value of variables to the console.

You can use also display to start watching variables. This is a good way of tracking the values of a variable while the execution goes on.

(rdb:1) display @recent_comments
+1: @recent_comments =

The variables inside the displaying list will be printed with their values after you move in the stack. To stop displaying a variable use undisplay n where n is the variable number (1 in the last example).

3.6. Step by Step

Now you should know where you are in the running trace and be able to print the available variables. But lets continue and move on with the application execution.

Use step (abbreviated s) to continue running your program until the next logical stopping point and return control to ruby-debug.

+ + + +

+ +	You can also use `step+ n` and `step- n` to move forward or backward n steps respectively.

You may also use next which is similar to step, but function or method calls that appear within the line of code are executed without stopping. As with step, you may use plus sign to move n steps.

The difference between next and step is that step stops at the next line of code executed, doing just a single step, while next moves to the next line without descending inside methods.

For example, consider this block of code with an included debugger statement:

class Author < ActiveRecord::Base
+  has_one :editorial
+  has_many :comments
+
+  def find_recent_comments(limit = 10)
+    debugger
+    @recent_comments ||= comments.find(
+      :all,
+      :conditions => ["created_at > ?", 1.week.ago],
+      :limit => limit
+    )
+  end
+end
+

+ + + +

+ +	You can use ruby-debug while using script/console. Just remember to `require "ruby-debug"` before calling the `debugger` method.

/PathTo/project $ script/console
+Loading development environment (Rails 2.1.0)
+>> require "ruby-debug"
+=> []
+>> author = Author.first
+=> #<Author id: 1, first_name: "Bob", last_name: "Smith", created_at: "2008-07-31 12:46:10", updated_at: "2008-07-31 12:46:10">
+>> author.find_recent_comments
+/PathTo/project/app/models/author.rb:11
+)

With the code stopped, take a look around:

(rdb:1) list
+[6, 15] in /PathTo/project/app/models/author.rb
+   6      debugger
+   7      @recent_comments ||= comments.find(
+   8        :all,
+   9        :conditions => ["created_at > ?", 1.week.ago],
+   10        :limit => limit
+=> 11      )
+   12    end
+   13  end

You are at the end of the line, but… was this line executed? You can inspect the instance variables.

(rdb:1) var instance
+@attributes = {"updated_at"=>"2008-07-31 12:46:10", "id"=>"1", "first_name"=>"Bob", "las...
+@attributes_cache = {}

@recent_comments hasn't been defined yet, so it's clear that this line hasn't been executed yet. Use the next command to move on in the code:

(rdb:1) next
+/PathTo/project/app/models/author.rb:12
+@recent_comments
+(rdb:1) var instance
+@attributes = {"updated_at"=>"2008-07-31 12:46:10", "id"=>"1", "first_name"=>"Bob", "las...
+@attributes_cache = {}
+@comments = []
+@recent_comments = []

Now you can see that the @comments relationship was loaded and @recent_comments defined because the line was executed.

If you want to go deeper into the stack trace you can move single steps, through your calling methods and into Rails code. This is one of the best ways to find bugs in your code, or perhaps in Ruby or Rails.

3.7. Breakpoints

A breakpoint makes your application stop whenever a certain point in the program is reached. The debugger shell is invoked in that line.

You can add breakpoints dynamically with the command break (or just b). There are 3 possible ways of adding breakpoints manually:

+
+break line: set breakpoint in the line in the current source file. +
+
+
+break file:line [if expression]: set breakpoint in the line number inside the file. If an expression is given it must evaluated to true to fire up the debugger. +
+
+
+break class(.|#)method [if expression]: set breakpoint in method (. and # for class and instance method respectively) defined in class. The expression works the same way as with file:line. +
+

(rdb:5) break 10
+Breakpoint 1 file /PathTo/project/vendor/rails/actionpack/lib/action_controller/filters.rb, line 10

Use info breakpoints n or info break n to list breakpoints. If you supply a number, it lists that breakpoint. Otherwise it lists all breakpoints.

(rdb:5) info breakpoints
+Num Enb What
+  1 y   at filters.rb:10

To delete breakpoints: use the command delete n to remove the breakpoint number n. If no number is specified, it deletes all breakpoints that are currently active..

(rdb:5) delete 1
+(rdb:5) info breakpoints
+No breakpoints.

You can also enable or disable breakpoints:

+
+enable breakpoints: allow a list breakpoints or all of them if no list is specified, to stop your program. This is the default state when you create a breakpoint. +
+
+
+disable breakpoints: the breakpoints will have no effect on your program. +
+

3.8. Catching Exceptions

The command catch exception-name (or just cat exception-name) can be used to intercept an exception of type exception-name when there would otherwise be is no handler for it.

To list all active catchpoints use catch.

3.9. Resuming Execution

There are two ways to resume execution of an application that is stopped in the debugger:

+
+continue [line-specification] (or c): resume program execution, at the address where your script last stopped; any breakpoints set at that address are bypassed. The optional argument line-specification allows you to specify a line number to set a one-time breakpoint which is deleted when that breakpoint is reached. +
+
+
+finish [frame-number] (or fin): execute until the selected stack frame returns. If no frame number is given, the application run until the currently selected frame returns. The currently selected frame starts out the most-recent frame or 0 if no frame positioning (e.g up, down or frame) has been performed. If a frame number is given it will run until the specified frame returns. +
+

3.10. Editing

Two commands allow you to open code from the debugger into an editor:

+
+edit [file:line]: edit file using the editor specified by the EDITOR environment variable. A specific line can also be given. +
+
+
+tmate n (abbreviated tm): open the current file in TextMate. It uses n-th frame if n is specified. +
+

3.11. Quitting

To exit the debugger, use the quit command (abbreviated q), or its alias exit.

A simple quit tries to terminate all threads in effect. Therefore your server will be stopped and you will have to start it again.

3.12. Settings

There are some settings that can be configured in ruby-debug to make it easier to debug your code. Here are a few of the available options:

+
+set reload: Reload source code when changed. +
+
+
+set autolist: Execute list command on every breakpoint. +
+
+
+set listsize n: Set number of source lines to list by default to n. +
+
+
+set forcestep: Make sure the next and step commands always move to a new line +
+

You can see the full list by using help set. Use help set subcommand to learn about a particular set command.

+ + + +

+ +	You can include any number of these configuration lines inside a `.rdebugrc` file in your HOME directory. ruby-debug will read this file every time it is loaded. and configure itself accordingly.

Here's a good start for an .rdebugrc:

set autolist
+set forcestep
+set listsize 25
+

4. References

+
+ruby-debug Homepage +
+
+
+Article: Debugging a Rails application with ruby-debug +
+
+
+ruby-debug Basics screencast +
+
+
+Ryan Bate's ruby-debug screencast +
+
+
+Ryan Bate's stack trace screencast +
+
+
+Ryan Bate's logger screencast +
+
+
+Debugging with ruby-debug +
+
+
+ruby-debug cheat sheet +
+
+
+Ruby on Rails Wiki: How to Configure Logging +
+

5. Changelog

Lighthouse ticket

+
+October 19, 2008: Copy editing pass by Mike Gunderloy +
+
+
+September 16, 2008: initial version by Emilio Tagua +
+

+ +

Ruby on Rails

Sustainable productivity for web-application development

Chapters

Debugging Rails Applications

1. View Helpers for Debugging

1.1. debug

1.2. to_yaml

1.3. inspect

2. The Logger

2.1. What is The Logger?

2.2. Log Levels

2.3. Sending Messages

3. Debugging with ruby-debug

3.1. Setup

3.2. The Shell

3.3. The Context

3.4. Threads

3.5. Inspecting Variables

3.6. Step by Step

3.7. Breakpoints

3.8. Catching Exceptions

3.9. Resuming Execution

3.10. Editing

3.11. Quitting

3.12. Settings

4. References

5. Changelog