From f5654e78b248ecc90e8556366c927e1176c2428f Mon Sep 17 00:00:00 2001 From: Francesco Rodriguez Date: Mon, 17 Sep 2012 12:26:52 -0500 Subject: update ActionMailer::Base documentation [ci skip] --- actionmailer/lib/action_mailer/base.rb | 589 ++++++++++++++++++--------------- 1 file changed, 323 insertions(+), 266 deletions(-) diff --git a/actionmailer/lib/action_mailer/base.rb b/actionmailer/lib/action_mailer/base.rb index 4a099553c0..416f1f5296 100644 --- a/actionmailer/lib/action_mailer/base.rb +++ b/actionmailer/lib/action_mailer/base.rb @@ -5,92 +5,102 @@ require 'active_support/core_ext/hash/except' require 'active_support/core_ext/module/anonymous' require 'action_mailer/log_subscriber' -module ActionMailer #:nodoc: - # Action Mailer allows you to send email from your application using a mailer model and views. +module ActionMailer # :nodoc: + # = Action Mailer # - # = Mailer Models + # Action Mailer allows you to send email from your application using a mailer + # model and views. + # + # == Mailer Models # # To use Action Mailer, you need to create a mailer model. # # $ rails generate mailer Notifier # - # The generated model inherits from ActionMailer::Base. A mailer model defines methods - # used to generate an email message. In these methods, you can setup variables to be used in - # the mailer views, options on the mail itself such as the :from address, and attachments. + # The generated model inherits from ActionMailer::Base. A mailer + # model defines methods used to generate an email message. In these methods, + # you can setup variables to be used in the mailer views, options on the mail + # itself such as the :from address, and attachments. # # Examples: # # class Notifier < ActionMailer::Base - # default :from => 'no-reply@example.com', - # :return_path => 'system@example.com' + # default from: 'no-reply@example.com', + # return_path: 'system@example.com' # # def welcome(recipient) # @account = recipient - # mail(:to => recipient.email_address_with_name, - # :bcc => ["bcc@example.com", "Order Watcher "]) + # mail(to: recipient.email_address_with_name, + # bcc: ['bcc@example.com', 'Order Watcher ']) # end # end # # Within the mailer method, you have access to the following methods: # - # * attachments[]= - Allows you to add attachments to your email in an intuitive - # manner; attachments['filename.png'] = File.read('path/to/filename.png') + # * attachments[]= - Allows you to add attachments to your email in + # an intuitive manner; attachments['filename.png'] = File.read('path/to/filename.png'). # - # * attachments.inline[]= - Allows you to add an inline attachment to your email - # in the same manner as attachments[]= + # * attachments.inline[]= - Allows you to add an inline attachment to + # your email in the same manner as attachments[]=. # - # * headers[]= - Allows you to specify any header field in your email such - # as headers['X-No-Spam'] = 'True'. Note, while most fields like To: - # From: can only appear once in an email header, other fields like X-Anything - # can appear multiple times. If you want to change a field that can appear multiple times, - # you need to set it to nil first so that Mail knows you are replacing it and not adding + # * headers[]= - Allows you to specify any header field in your email + # such as headers['X-No-Spam'] = 'True'. Note, while most fields + # like To: or From: can only appear once in an email + # header, other fields like X-Anything can appear multiple times. + # If you want to change a field that can appear multiple times, you need to + # set it to nil first so that Mail knows you are replacing it and not adding # another field of the same name. # - # * headers(hash) - Allows you to specify multiple headers in your email such - # as headers({'X-No-Spam' => 'True', 'In-Reply-To' => '1234@message.id'}) + # * headers(hash) - Allows you to specify multiple headers in your + # email such as headers({'X-No-Spam' => 'True', 'In-Reply-To' => '1234@message.id'}). # # * mail - Allows you to specify email to be sent. # - # The hash passed to the mail method allows you to specify any header that a Mail::Message - # will accept (any valid Email header including optional fields). + # The hash passed to the mail method allows you to specify any header that a + # Mail::Message will accept (any valid Email header including + # optional fields). # - # The mail method, if not passed a block, will inspect your views and send all the views with - # the same name as the method, so the above action would send the +welcome.text.erb+ view - # file as well as the +welcome.text.html.erb+ view file in a +multipart/alternative+ email. + # The mail method, if not passed a block, will inspect your views and send all + # the views with the same name as the method, so the above action would send + # the +welcome.text.erb+ view file as well as the +welcome.text.html.erb+ view + # file in a +multipart/alternative+ email. # # If you want to explicitly render only certain templates, pass a block: # - # mail(:to => user.email) do |format| + # mail(to: user.email) do |format| # format.text # format.html # end # # The block syntax is also useful in providing information specific to a part: # - # mail(:to => user.email) do |format| - # format.text(:content_transfer_encoding => "base64") + # mail(to: user.email) do |format| + # format.text(content_transfer_encoding: 'base64') # format.html # end # # Or even to render a special view: # - # mail(:to => user.email) do |format| + # mail(to: user.email) do |format| # format.text - # format.html { render "some_other_template" } + # format.html { render 'some_other_template' } # end # - # = Mailer views + # == Mailer views # - # Like Action Controller, each mailer class has a corresponding view directory in which each - # method of the class looks for a template with its name. + # Like Action Controller, each mailer class has a corresponding view directory + # in which each method of the class looks for a template with its name. # - # To define a template to be used with a mailing, create an .erb file with the same - # name as the method in your mailer model. For example, in the mailer defined above, the template at - # app/views/notifier/welcome.text.erb would be used to generate the email. + # To define a template to be used with a mailing, create an .erb file + # with the same name as the method in your mailer model. For example, in the + # mailer defined above, the template at app/views/notifier/welcome.text.erb + # would be used to generate the email. # - # Variables defined in the model are accessible as instance variables in the view. + # Variables defined in the model are accessible as instance variables in the + # view. # - # Emails by default are sent in plain text, so a sample view for our model example might look like this: + # Emails by default are sent in plain text, so a sample view for our model + # example might look like this: # # Hi <%= @account.name %>, # Thanks for joining our service! Please check back often. @@ -98,170 +108,191 @@ module ActionMailer #:nodoc: # You can even use Action Pack helpers in these views. For example: # # You got a new note! - # <%= truncate(@note.body, :length => 25) %> + # <%= truncate(@note.body, length: 25) %> # - # If you need to access the subject, from or the recipients in the view, you can do that through message object: + # If you need to access the subject, from or the recipients in the view, you + # can do that through message object: # # You got a new note from <%= message.from %>! - # <%= truncate(@note.body, :length => 25) %> + # <%= truncate(@note.body, length: 25) %> # # - # = Generating URLs + # == Generating URLs # - # URLs can be generated in mailer views using url_for or named routes. Unlike controllers from - # Action Pack, the mailer instance doesn't have any context about the incoming request, so you'll need - # to provide all of the details needed to generate a URL. + # URLs can be generated in mailer views using url_for or named routes. + # Unlike controllers from Action Pack, the mailer instance doesn't have any + # context about the incoming request, so you'll need to provide all of the + # details needed to generate a URL. # - # When using url_for you'll need to provide the :host, :controller, and :action: + # When using url_for you'll need to provide the :host, + # :controller, and :action: # - # <%= url_for(:host => "example.com", :controller => "welcome", :action => "greeting") %> + # <%= url_for(host: 'example.com', controller: 'welcome', action: 'greeting') %> # # When using named routes you only need to supply the :host: # - # <%= users_url(:host => "example.com") %> + # <%= users_url(host: 'example.com') %> # - # You should use the named_route_url style (which generates absolute URLs) and avoid using the - # named_route_path style (which generates relative URLs), since clients reading the mail will - # have no concept of a current URL from which to determine a relative path. + # You should use the named_route_url style (which generates absolute + # URLs) and avoid using the named_route_path style (which generates + # relative URLs), since clients reading the mail will have no concept of a + # current URL from which to determine a relative path. # - # It is also possible to set a default host that will be used in all mailers by setting the :host - # option as a configuration option in config/application.rb: + # It is also possible to set a default host that will be used in all mailers + # by setting the :host option as a configuration option in + # config/application.rb: # - # config.action_mailer.default_url_options = { :host => "example.com" } + # config.action_mailer.default_url_options = { host: 'example.com' } # - # When you decide to set a default :host for your mailers, then you need to make sure to use the - # :only_path => false option when using url_for. Since the url_for view helper - # will generate relative URLs by default when a :host option isn't explicitly provided, passing - # :only_path => false will ensure that absolute URLs are generated. + # When you decide to set a default :host for your mailers, then you + # need to make sure to use the only_path: false option when using + # url_for. Since the url_for view helper will generate + # relative URLs by default when a :host option isn't explicitly + # provided, passing only_path: false will ensure that absolute URLs + # are generated. # - # = Sending mail + # == Sending mail # - # Once a mailer action and template are defined, you can deliver your message or create it and save it - # for delivery later: + # Once a mailer action and template are defined, you can deliver your message + # or create it and save it for delivery later: # # Notifier.welcome(david).deliver # sends the email # mail = Notifier.welcome(david) # => a Mail::Message object # mail.deliver # sends the email # - # You never instantiate your mailer class. Rather, you just call the method you defined on the class itself. + # You never instantiate your mailer class. Rather, you just call the method + # you defined on the class itself. # # = Multipart Emails # - # Multipart messages can also be used implicitly because Action Mailer will automatically detect and use - # multipart templates, where each template is named after the name of the action, followed by the content - # type. Each such detected template will be added as a separate part to the message. + # Multipart messages can also be used implicitly because Action Mailer will + # automatically detect and use multipart templates, where each template is + # named after the name of the action, followed by the content type. Each such + # detected template will be added as a separate part to the message. # # For example, if the following templates exist: + # # * signup_notification.text.erb # * signup_notification.text.html.erb # * signup_notification.text.xml.builder # * signup_notification.text.yaml.erb # - # Each would be rendered and added as a separate part to the message, with the corresponding content - # type. The content type for the entire message is automatically set to multipart/alternative, - # which indicates that the email contains multiple different representations of the same email - # body. The same instance variables defined in the action are passed to all email templates. + # Each would be rendered and added as a separate part to the message, with the + # corresponding content type. The content type for the entire message is + # automatically set to multipart/alternative, which indicates that + # the email contains multiple different representations of the same email + # body. The same instance variables defined in the action are passed to all + # email templates. # - # Implicit template rendering is not performed if any attachments or parts have been added to the email. - # This means that you'll have to manually add each part to the email and set the content type of the email - # to multipart/alternative. + # Implicit template rendering is not performed if any attachments or parts + # have been added to the email. This means that you'll have to manually add + # each part to the email and set the content type of the email to + # multipart/alternative. # - # = Attachments + # == Attachments # # Sending attachment in emails is easy: # # class ApplicationMailer < ActionMailer::Base # def welcome(recipient) # attachments['free_book.pdf'] = File.read('path/to/file.pdf') - # mail(:to => recipient, :subject => "New account information") + # mail(to: recipient, subject: 'New account information') # end # end # - # Which will (if it had both a welcome.text.erb and welcome.text.html.erb - # template in the view directory), send a complete multipart/mixed email with two parts, - # the first part being a multipart/alternative with the text and HTML email parts inside, - # and the second being a application/pdf with a Base64 encoded copy of the file.pdf book - # with the filename +free_book.pdf+. + # Which will (if it had both a welcome.text.erb and + # welcome.text.html.erb template in the view directory), send a + # complete multipart/mixed email with two parts, the first part being + # a multipart/alternative with the text and HTML email parts inside, + # and the second being a application/pdf with a Base64 encoded copy + # of the file.pdf book with the filename +free_book.pdf+. # - # If you need to send attachments with no content, you need to create an empty view for it, - # or add an empty body parameter like this: + # If you need to send attachments with no content, you need to create an empty + # view for it, or add an empty body parameter like this: # # class ApplicationMailer < ActionMailer::Base # def welcome(recipient) # attachments['free_book.pdf'] = File.read('path/to/file.pdf') - # mail(:to => recipient, :subject => "New account information", :body => "") + # mail(to: recipient, subject: 'New account information', body: '') # end # end # - # = Inline Attachments + # == Inline Attachments # - # You can also specify that a file should be displayed inline with other HTML. This is useful - # if you want to display a corporate logo or a photo. + # You can also specify that a file should be displayed inline with other HTML. + # This is useful if you want to display a corporate logo or a photo. # # class ApplicationMailer < ActionMailer::Base # def welcome(recipient) # attachments.inline['photo.png'] = File.read('path/to/photo.png') - # mail(:to => recipient, :subject => "Here is what we look like") + # mail(to: recipient, subject: 'Here is what we look like') # end # end # - # And then to reference the image in the view, you create a welcome.html.erb file and - # make a call to +image_tag+ passing in the attachment you want to display and then call - # +url+ on the attachment to get the relative content id path for the image source: + # And then to reference the image in the view, you create a + # welcome.html.erb file and make a call to +image_tag+ passing in the + # attachment you want to display and then call +url+ on the attachment to get + # the relative content id path for the image source: # #

Please Don't Cringe

# # <%= image_tag attachments['photo.png'].url -%> # - # As we are using Action View's +image_tag+ method, you can pass in any other options you want: + # As we are using Action View's +image_tag+ method, you can pass in any other + # options you want: # #

Please Don't Cringe

# - # <%= image_tag attachments['photo.png'].url, :alt => 'Our Photo', :class => 'photo' -%> + # <%= image_tag attachments['photo.png'].url, alt: 'Our Photo', class: 'photo' -%> # - # = Observing and Intercepting Mails + # == Observing and Intercepting Mails # - # Action Mailer provides hooks into the Mail observer and interceptor methods. These allow you to - # register classes that are called during the mail delivery life cycle. + # Action Mailer provides hooks into the Mail observer and interceptor methods. + # These allow you to register classes that are called during the mail delivery + # life cycle. # - # An observer class must implement the :delivered_email(message) method which will be - # called once for every email sent after the email has been sent. + # An observer class must implement the :delivered_email(message) + # method which will be called once for every email sent after the email has + # been sent. # - # An interceptor class must implement the :delivering_email(message) method which will be - # called before the email is sent, allowing you to make modifications to the email before it hits - # the delivery agents. Your class should make any needed modifications directly to the passed - # in Mail::Message instance. + # An interceptor class must implement the :delivering_email(message) + # method which will be called before the email is sent, allowing you to make + # modifications to the email before it hits the delivery agents. Your class + # should make any needed modifications directly to the passed in + # Mail::Message instance. # - # = Default Hash + # == Default Hash # - # Action Mailer provides some intelligent defaults for your emails, these are usually specified in a - # default method inside the class definition: + # Action Mailer provides some intelligent defaults for your emails, these are + # usually specified in a default method inside the class definition: # # class Notifier < ActionMailer::Base - # default :sender => 'system@example.com' + # default sender: 'system@example.com' # end # - # You can pass in any header value that a Mail::Message accepts. Out of the box, - # ActionMailer::Base sets the following: + # You can pass in any header value that a Mail::Message accepts. Out + # of the box, ActionMailer::Base sets the following: # - # * :mime_version => "1.0" - # * :charset => "UTF-8", - # * :content_type => "text/plain", - # * :parts_order => [ "text/plain", "text/enriched", "text/html" ] + # * mime_version: '1.0' + # * charset: 'UTF-8', + # * content_type: 'text/plain', + # * parts_order: [ 'text/plain', 'text/enriched', 'text/html' ] # - # parts_order and charset are not actually valid Mail::Message header fields, - # but Action Mailer translates them appropriately and sets the correct values. + # parts_order and charset are not actually valid + # Mail::Message header fields, but Action Mailer translates them + # appropriately and sets the correct values. # - # As you can pass in any header, you need to either quote the header as a string, or pass it in as - # an underscored symbol, so the following will work: + # As you can pass in any header, you need to either quote the header as a + # string, or pass it in as an underscored symbol, so the following will work: # # class Notifier < ActionMailer::Base # default 'Content-Transfer-Encoding' => '7bit', - # :content_description => 'This is a description' + # content_description: 'This is a description' # end # - # Finally, Action Mailer also supports passing Proc objects into the default hash, so you - # can define methods that evaluate as the message is being generated: + # Finally, Action Mailer also supports passing Proc objects into the + # default hash, so you can define methods that evaluate as the message is + # being generated: # # class Notifier < ActionMailer::Base # default 'X-Special-Header' => Proc.new { my_method } @@ -273,20 +304,23 @@ module ActionMailer #:nodoc: # end # end # - # Note that the proc is evaluated right at the start of the mail message generation, so if you - # set something in the defaults using a proc, and then set the same thing inside of your - # mailer method, it will get over written by the mailer method. + # Note that the proc is evaluated right at the start of the mail message + # generation, so if you set something in the defaults using a proc, and then + # set the same thing inside of your mailer method, it will get over written by + # the mailer method. # - # It is also possible to set these default options that will be used in all mailers through - # the default_options= configuration in config/application.rb: + # It is also possible to set these default options that will be used in all + # mailers through the default_options= configuration in + # config/application.rb: # - # config.action_mailer.default_options = { from: "no-reply@example.org" } + # config.action_mailer.default_options = { from: 'no-reply@example.org' } # - # = Callbacks + # == Callbacks # - # You can specify callbacks using before_filter and after_filter for configuring your messages. - # This may be useful, for example, when you want to add default inline attachments for all - # messages sent out by a certain mailer class: + # You can specify callbacks using before_filter and after_filter + # for configuring your messages. This may be useful, for example, when you + # want to add default inline attachments for all messages sent out by a + # certain mailer class: # # class Notifier < ActionMailer::Base # before_filter :add_inline_attachment! @@ -298,70 +332,86 @@ module ActionMailer #:nodoc: # private # # def add_inline_attachment! - # attachments.inline["footer.jpg"] = File.read('/path/to/filename.jpg') + # attachments.inline['footer.jpg'] = File.read('/path/to/filename.jpg') # end # end # - # Callbacks in ActionMailer are implemented using AbstractController::Callbacks, so you - # can define and configure callbacks in the same manner that you would use callbacks in - # classes that inherit from ActionController::Base. + # Callbacks in ActionMailer are implemented using AbstractController::Callbacks, + # so you can define and configure callbacks in the same manner that you would + # use callbacks in classes that inherit from ActionController::Base. # - # Note that unless you have a specific reason to do so, you should prefer using before_filter - # rather than after_filter in your ActionMailer classes so that headers are parsed properly. + # Note that unless you have a specific reason to do so, you should prefer + # using before_filter rather than after_filter in your + # ActionMailer classes so that headers are parsed properly. # - # = Configuration options + # == Configuration options # # These options are specified on the class level, like # ActionMailer::Base.raise_delivery_errors = true # - # * default - You can pass this in at a class level as well as within the class itself as - # per the above section. - # - # * logger - the logger is used for generating information on the mailing run if available. - # Can be set to nil for no logging. Compatible with both Ruby's own Logger and Log4r loggers. - # - # * smtp_settings - Allows detailed configuration for :smtp delivery method: - # * :address - Allows you to use a remote mail server. Just change it from its default - # "localhost" setting. - # * :port - On the off chance that your mail server doesn't run on port 25, you can change it. - # * :domain - If you need to specify a HELO domain, you can do it here. - # * :user_name - If your mail server requires authentication, set the username in this setting. - # * :password - If your mail server requires authentication, set the password in this setting. - # * :authentication - If your mail server requires authentication, you need to specify the - # authentication type here. - # This is a symbol and one of :plain (will send the password in the clear), :login (will - # send password Base64 encoded) or :cram_md5 (combines a Challenge/Response mechanism to exchange - # information and a cryptographic Message Digest 5 algorithm to hash important information) - # * :enable_starttls_auto - When set to true, detects if STARTTLS is enabled in your SMTP server - # and starts to use it. - # * :openssl_verify_mode - When using TLS, you can set how OpenSSL checks the certificate. This is - # really useful if you need to validate a self-signed and/or a wildcard certificate. You can use the name - # of an OpenSSL verify constant ('none', 'peer', 'client_once','fail_if_no_peer_cert') or directly the - # constant (OpenSSL::SSL::VERIFY_NONE, OpenSSL::SSL::VERIFY_PEER,...). - # - # * sendmail_settings - Allows you to override options for the :sendmail delivery method. - # * :location - The location of the sendmail executable. Defaults to /usr/sbin/sendmail. - # * :arguments - The command line arguments. Defaults to -i -t with -f sender@address - # added automatically before the message is sent. - # - # * file_settings - Allows you to override options for the :file delivery method. - # * :location - The directory into which emails will be written. Defaults to the application - # tmp/mails. - # - # * raise_delivery_errors - Whether or not errors should be raised if the email fails to be delivered. - # - # * delivery_method - Defines a delivery method. Possible values are :smtp (default), - # :sendmail, :test, and :file. Or you may provide a custom delivery method - # object e.g. MyOwnDeliveryMethodClass. See the Mail gem documentation on the interface you need to - # implement for a custom delivery agent. - # - # * perform_deliveries - Determines whether emails are actually sent from Action Mailer when you - # call .deliver on an mail message or on an Action Mailer method. This is on by default but can - # be turned off to aid in functional testing. - # - # * deliveries - Keeps an array of all the emails sent out through the Action Mailer with - # delivery_method :test. Most useful for unit and functional testing. - # + # * default - You can pass this in at a class level as well as within + # the class itself as per the above section. + # + # * logger - the logger is used for generating information on the + # mailing run if available. Can be set to +nil+ for no logging. Compatible + # with both Ruby's own Logger and Log4r loggers. + # + # * smtp_settings - Allows detailed configuration for :smtp + # delivery method: + # * :address - Allows you to use a remote mail server. Just change + # it from its default "localhost" setting. + # * :port - On the off chance that your mail server doesn't run on + # port 25, you can change it. + # * :domain - If you need to specify a HELO domain, you can do it + # here. + # * :user_name - If your mail server requires authentication, set + # the username in this setting. + # * :password - If your mail server requires authentication, set + # the password in this setting. + # * :authentication - If your mail server requires authentication, + # you need to specify the authentication type here. This is a symbol and + # one of :plain (will send the password in the clear), :login + # (will send password Base64 encoded) or :cram_md5 (combines a + # Challenge/Response mechanism to exchange information and a cryptographic + # Message Digest 5 algorithm to hash important information). + # * :enable_starttls_auto - When set to +true+, detects if STARTTLS + # is enabled in your SMTP server and starts to use it. + # * :openssl_verify_mode - When using TLS, you can set how OpenSSL + # checks the certificate. This is really useful if you need to validate a + # self-signed and/or a wildcard certificate. You can use the name of an + # OpenSSL verify constant ('none', 'peer', 'client_once', 'fail_if_no_peer_cert') + # or directly the constant (OpenSSL::SSL::VERIFY_NONE, OpenSSL::SSL::VERIFY_PEER,...). + # + # * sendmail_settings - Allows you to override options for the + # :sendmail delivery method. + # * :location - The location of the sendmail executable. Defaults + # to /usr/sbin/sendmail. + # * :arguments - The command line arguments. Defaults to -i -t + # with -f sender@address added automatically before the message + # is sent. + # + # * file_settings - Allows you to override options for the :file + # delivery method. + # * :location - The directory into which emails will be written. + # Defaults to the application tmp/mails. + # + # * raise_delivery_errors - Whether or not errors should be raised if + # the email fails to be delivered. + # + # * delivery_method - Defines a delivery method. Possible values are + # :smtp (default), :sendmail, :test, and :file. + # Or you may provide a custom delivery method object e.g. MyOwnDeliveryMethodClass. + # See the Mail gem documentation on the interface you need to implement for + # a custom delivery agent. + # + # * perform_deliveries - Determines whether emails are actually sent + # from Action Mailer when you call .deliver on an mail message or + #  on an Action Mailer method. This is on by default but can be turned off to + # aid in functional testing. + # + # * deliveries - Keeps an array of all the emails sent out through + # the Action Mailer with delivery_method :test. Most useful for + # unit and functional testing. class Base < AbstractController::Base include DeliveryMethods abstract! @@ -378,7 +428,7 @@ module ActionMailer #:nodoc: helper ActionMailer::MailHelper - private_class_method :new #:nodoc: + private_class_method :new # :nodoc: class_attribute :default_params self.default_params = { @@ -400,16 +450,16 @@ module ActionMailer #:nodoc: end # Register an Observer which will be notified when mail is delivered. - # Either a class or a string can be passed in as the Observer. If a string is passed in - # it will be constantized. + # Either a class or a string can be passed in as the Observer. If a string + # is passed in it will be constantized. def register_observer(observer) delivery_observer = (observer.is_a?(String) ? observer.constantize : observer) Mail.register_observer(delivery_observer) end # Register an Interceptor which will be called before mail is sent. - # Either a class or a string can be passed in as the Interceptor. If a string is passed in - # it will be constantized. + # Either a class or a string can be passed in as the Interceptor. If a + # string is passed in it will be constantized. def register_interceptor(interceptor) delivery_interceptor = (interceptor.is_a?(String) ? interceptor.constantize : interceptor) Mail.register_interceptor(delivery_interceptor) @@ -425,9 +475,9 @@ module ActionMailer #:nodoc: self.default_params = default_params.merge(value).freeze if value default_params end - # Allows to set defaults through app configuration: + # Allows to set defaults through app configuration. # - # config.action_mailer.default_options = { from: "no-reply@example.org" } + # config.action_mailer.default_options = { from: 'no-reply@example.org' } alias :default_options= :default # Receives a raw email, parses it into an email object, decodes it, @@ -449,18 +499,20 @@ module ActionMailer #:nodoc: end end - # Wraps an email delivery inside of Active Support Notifications instrumentation. This - # method is actually called by the Mail::Message object itself through a callback - # when you call :deliver on the Mail::Message, calling +deliver_mail+ directly - # and passing a Mail::Message will do nothing except tell the logger you sent the email. - def deliver_mail(mail) #:nodoc: + # Wraps an email delivery inside of Active Support Notifications + # instrumentation. This method is actually called by the Mail::Message + # object itself through a callback when you call :deliver on the + # Mail::Message, calling +deliver_mail+ directly and passing a + # Mail::Message will do nothing except tell the logger you sent + # the email. + def deliver_mail(mail) # :nodoc: ActiveSupport::Notifications.instrument("deliver.action_mailer") do |payload| set_payload_for_mail(payload, mail) yield # Let Mail do the delivery actions end end - def respond_to?(method, include_private = false) #:nodoc: + def respond_to?(method, include_private = false) # :nodoc: super || action_methods.include?(method.to_s) end @@ -479,7 +531,7 @@ module ActionMailer #:nodoc: protected - def set_payload_for_mail(payload, mail) #:nodoc: + def set_payload_for_mail(payload, mail) # :nodoc: payload[:mailer] = name payload[:message_id] = mail.message_id payload[:subject] = mail.subject @@ -491,7 +543,7 @@ module ActionMailer #:nodoc: payload[:mail] = mail.encoded end - def method_missing(method, *args) #:nodoc: + def method_missing(method, *args) # :nodoc: return super unless respond_to?(method) new(method, *args).message end @@ -518,15 +570,15 @@ module ActionMailer #:nodoc: self.class.mailer_name end - # Allows you to pass random and unusual headers to the new Mail::Message object - # which will add them to itself. + # Allows you to pass random and unusual headers to the new Mail::Message + # object which will add them to itself. # - # headers['X-Special-Domain-Specific-Header'] = "SecretValue" + # headers['X-Special-Domain-Specific-Header'] = 'SecretValue' # - # You can also pass a hash into headers of header field names and values, which - # will then be set on the Mail::Message object: + # You can also pass a hash into headers of header field names and values, + # which will then be set on the Mail::Message object: # - # headers 'X-Special-Domain-Specific-Header' => "SecretValue", + # headers 'X-Special-Domain-Specific-Header' => 'SecretValue', # 'In-Reply-To' => incoming.message_id # # The resulting Mail::Message will have the following in its header: @@ -544,23 +596,24 @@ module ActionMailer #:nodoc: # # mail.attachments['filename.jpg'] = File.read('/path/to/filename.jpg') # - # If you do this, then Mail will take the file name and work out the mime type - # set the Content-Type, Content-Disposition, Content-Transfer-Encoding and - # base64 encode the contents of the attachment all for you. + # If you do this, then Mail will take the file name and work out the mime + # type set the Content-Type, Content-Disposition, Content-Transfer-Encoding + # and base64 encode the contents of the attachment all for you. # - # You can also specify overrides if you want by passing a hash instead of a string: + # You can also specify overrides if you want by passing a hash instead of a + # string: # - # mail.attachments['filename.jpg'] = {:mime_type => 'application/x-gzip', - # :content => File.read('/path/to/filename.jpg')} + # mail.attachments['filename.jpg'] = { mime_type: 'application/x-gzip', + # content: File.read('/path/to/filename.jpg') } # - # If you want to use a different encoding than Base64, you can pass an encoding in, - # but then it is up to you to pass in the content pre-encoded, and don't expect - # Mail to know how to decode this data: + # If you want to use a different encoding than Base64, you can pass an + # encoding in, but then it is up to you to pass in the content pre-encoded, + # and don't expect Mail to know how to decode this data: # # file_content = SpecialEncode(File.read('/path/to/filename.jpg')) - # mail.attachments['filename.jpg'] = {:mime_type => 'application/x-gzip', - # :encoding => 'SpecialEncoding', - # :content => file_content } + # mail.attachments['filename.jpg'] = { mime_type: 'application/x-gzip', + # encoding: 'SpecialEncoding', + # content: file_content } # # You can also search for specific attachments: # @@ -569,99 +622,102 @@ module ActionMailer #:nodoc: # # # or by index # mail.attachments[0] # => Mail::Part (first attachment) - # def attachments @_message.attachments end - # The main method that creates the message and renders the email templates. There are - # two ways to call this method, with a block, or without a block. - # - # Both methods accept a headers hash. This hash allows you to specify the most used headers - # in an email message, these are: - # - # * :subject - The subject of the message, if this is omitted, Action Mailer will - # ask the Rails I18n class for a translated :subject in the scope of - # [mailer_scope, action_name] or if this is missing, will translate the - # humanized version of the action_name - # * :to - Who the message is destined for, can be a string of addresses, or an array - # of addresses. - # * :from - Who the message is from - # * :cc - Who you would like to Carbon-Copy on this email, can be a string of addresses, - # or an array of addresses. - # * :bcc - Who you would like to Blind-Carbon-Copy on this email, can be a string of - # addresses, or an array of addresses. + # The main method that creates the message and renders the email templates. + # There are two ways to call this method, with a block, or without a block. + # + # Both methods accept a headers hash. This hash allows you to specify the + # most used headers in an email message, these are: + # + # * :subject - The subject of the message, if this is omitted, + # Action Mailer will ask the Rails I18n class for a translated + # :subject in the scope of [mailer_scope, action_name] + # or if this is missing, will translate the humanized version of the + # action_name. + # * :to - Who the message is destined for, can be a string of + #  addresses, or an array of addresses. + # * :from - Who the message is from. + # * :cc - Who you would like to Carbon-Copy on this email, can be a + # string of addresses, or an array of addresses. + # * :bcc - Who you would like to Blind-Carbon-Copy on this email, + # can be a string of addresses, or an array of addresses. # * :reply_to - Who to set the Reply-To header of the email to. # * :date - The date to say the email was sent on. # - # You can set default values for any of the above headers (except :date) by using the default - # class method: + # You can set default values for any of the above headers (except :date) by + # using the +default+ class method: # # class Notifier < ActionMailer::Base - # self.default :from => 'no-reply@test.lindsaar.net', - # :bcc => 'email_logger@test.lindsaar.net', - # :reply_to => 'bounces@test.lindsaar.net' + # self.default from: 'no-reply@test.lindsaar.net', + # bcc: 'email_logger@test.lindsaar.net', + # reply_to: 'bounces@test.lindsaar.net' # end # # If you need other headers not listed above, you can either pass them in # as part of the headers hash or use the headers['name'] = value # method. # - # When a :return_path is specified as header, that value will be used as the 'envelope from' - # address for the Mail message. Setting this is useful when you want delivery notifications - # sent to a different address than the one in :from. Mail will actually use the - # :return_path in preference to the :sender in preference to the :from + # When a :return_path is specified as header, that value will be + # used as the 'envelope from' address for the Mail message. Setting this is + # useful when you want delivery notifications sent to a different address + # than the one in :from. Mail will actually use the :return_path + # in preference to the :sender in preference to the :from # field for the 'envelope from' value. # - # If you do not pass a block to the +mail+ method, it will find all templates in the - # view paths using by default the mailer name and the method name that it is being - # called from, it will then create parts for each of these templates intelligently, - # making educated guesses on correct content type and sequence, and return a fully - # prepared Mail::Message ready to call :deliver on to send. + # If you do not pass a block to the +mail+ method, it will find all + # templates in the view paths using by default the mailer name and the + # method name that it is being called from, it will then create parts for + # each of these templates intelligently, making educated guesses on correct + # content type and sequence, and return a fully prepared Mail::Message + # ready to call :deliver on to send. # # For example: # # class Notifier < ActionMailer::Base - # default :from => 'no-reply@test.lindsaar.net', + # default from: 'no-reply@test.lindsaar.net', # # def welcome - # mail(:to => 'mikel@test.lindsaar.net') + # mail(to: 'mikel@test.lindsaar.net') # end # end # # Will look for all templates at "app/views/notifier" with name "welcome". - # If no welcome template exists, it will raise an ActionView::MissingTemplate error. + # If no welcome template exists, it will raise an ActionView::MissingTemplate + # error. # # However, those can be customized: # - # mail(:template_path => 'notifications', :template_name => 'another') + # mail(template_path: 'notifications', template_name: 'another') # - # And now it will look for all templates at "app/views/notifications" with name "another". + # And now it will look for all templates at "app/views/notifications" with + # name "another". # # If you do pass a block, you can render specific templates of your choice: # - # mail(:to => 'mikel@test.lindsaar.net') do |format| + # mail(to: 'mikel@test.lindsaar.net') do |format| # format.text # format.html # end # # You can even render text directly without using a template: # - # mail(:to => 'mikel@test.lindsaar.net') do |format| - # format.text { render :text => "Hello Mikel!" } - # format.html { render :text => "

Hello Mikel!

" } + # mail(to: 'mikel@test.lindsaar.net') do |format| + # format.text { render text: 'Hello Mikel!' } + # format.html { render text: '

Hello Mikel!

' } # end # - # Which will render a multipart/alternative email with text/plain and - # text/html parts. + # Which will render a multipart/alternative email with + # text/plain and text/html parts. # # The block syntax also allows you to customize the part headers if desired: # - # mail(:to => 'mikel@test.lindsaar.net') do |format| - # format.text(:content_transfer_encoding => "base64") + # mail(to: 'mikel@test.lindsaar.net') do |format| + # format.text(content_transfer_encoding: 'base64') # format.html # end - # def mail(headers={}, &block) m = @_message @@ -726,10 +782,11 @@ module ActionMailer #:nodoc: end end - # Translates the +subject+ using Rails I18n class under [mailer_scope, action_name] scope. - # If it does not find a translation for the +subject+ under the specified scope it will default to a - # humanized version of the action_name. - def default_i18n_subject #:nodoc: + # Translates the +subject+ using Rails I18n class under + # [mailer_scope, action_name] scope. If it does not find a + # translation for the +subject+ under the specified scope it will default + # to a humanized version of the action_name. + def default_i18n_subject # :nodoc: mailer_scope = self.class.mailer_name.tr('/', '.') I18n.t(:subject, :scope => [mailer_scope, action_name], :default => action_name.humanize) end -- cgit v1.2.3