From 90d94cd77e56f00476c4b0e2d06f4d26912be362 Mon Sep 17 00:00:00 2001 From: David Heinemeier Hansson Date: Mon, 24 Jan 2005 14:14:08 +0000 Subject: Fetch from current dir git-svn-id: http://svn-commit.rubyonrails.org/rails/trunk@497 5ecf4fe2-1ee6-0310-87b1-e25e094e27de --- activesupport/lib/breakpoint.rb | 1036 +++++++++++++++++++-------------------- 1 file changed, 518 insertions(+), 518 deletions(-) diff --git a/activesupport/lib/breakpoint.rb b/activesupport/lib/breakpoint.rb index 1923d49733..1c171e2ee6 100755 --- a/activesupport/lib/breakpoint.rb +++ b/activesupport/lib/breakpoint.rb @@ -1,518 +1,518 @@ -# The Breakpoint library provides the convenience of -# being able to inspect and modify state, diagnose -# bugs all via IRB by simply setting breakpoints in -# your applications by the call of a method. -# -# This library was written and is supported by me, -# Florian Gross. I can be reached at flgr@ccan.de -# and enjoy getting feedback about my libraries. -# -# The whole library (including breakpoint_client.rb -# and binding_of_caller.rb) is licensed under the -# same license that Ruby uses. (Which is currently -# either the GNU General Public License or a custom -# one that allows for commercial usage.) If you for -# some good reason need to use this under another -# license please contact me. - -require 'irb' -require 'binding_of_caller' -require 'drb' -require 'drb/acl' - -module Breakpoint - id = %q$Id: breakpoint.rb 41 2005-01-22 20:22:10Z flgr $ - Version = id.split(" ")[2].to_i - - extend self - - # This will pop up an interactive ruby session at a - # pre-defined break point in a Ruby application. In - # this session you can examine the environment of - # the break point. - # - # You can get a list of variables in the context using - # local_variables via +local_variables+. You can then - # examine their values by typing their names. - # - # You can have a look at the call stack via +caller+. - # - # The source code around the location where the breakpoint - # was executed can be examined via +source_lines+. Its - # argument specifies how much lines of context to display. - # The default amount of context is 5 lines. Note that - # the call to +source_lines+ can raise an exception when - # it isn't able to read in the source code. - # - # breakpoints can also return a value. They will execute - # a supplied block for getting a default return value. - # A custom value can be returned from the session by doing - # +throw(:debug_return, value)+. - # - # You can also give names to break points which will be - # used in the message that is displayed upon execution - # of them. - # - # Here's a sample of how breakpoints should be placed: - # - # class Person - # def initialize(name, age) - # @name, @age = name, age - # breakpoint("Person#initialize") - # end - # - # attr_reader :age - # def name - # breakpoint("Person#name") { @name } - # end - # end - # - # person = Person.new("Random Person", 23) - # puts "Name: #{person.name}" - # - # And here is a sample debug session: - # - # Executing break point "Person#initialize" at file.rb:4 in `initialize' - # irb(#):001:0> local_variables - # => ["name", "age", "_", "__"] - # irb(#):002:0> [name, age] - # => ["Random Person", 23] - # irb(#):003:0> [@name, @age] - # => ["Random Person", 23] - # irb(#):004:0> self - # => # - # irb(#):005:0> @age += 1; self - # => # - # irb(#):006:0> exit - # Executing break point "Person#name" at file.rb:9 in `name' - # irb(#):001:0> throw(:debug_return, "Overriden name") - # Name: Overriden name - # - # Breakpoint sessions will automatically have a few - # convenience methods available. See Breakpoint::CommandBundle - # for a list of them. - # - # Breakpoints can also be used remotely over sockets. - # This is implemented by running part of the IRB session - # in the application and part of it in a special client. - # You have to call Breakpoint.activate_drb to enable - # support for remote breakpoints and then run - # breakpoint_client.rb which is distributed with this - # library. See the documentation of Breakpoint.activate_drb - # for details. - def breakpoint(id = nil, context = nil, &block) - callstack = caller - callstack.slice!(0, 3) if callstack.first["breakpoint"] - file, line, method = *callstack.first.match(/^(.+?):(\d+)(?::in `(.*?)')?/).captures - - message = "Executing break point " + (id ? "#{id.inspect} " : "") + - "at #{file}:#{line}" + (method ? " in `#{method}'" : "") - - if context then - return handle_breakpoint(context, message, file, line, &block) - end - - Binding.of_caller do |binding_context| - handle_breakpoint(binding_context, message, file, line, &block) - end - end - - module CommandBundle - # Proxy to a Breakpoint client. Lets you directly execute code - # in the context of the client. - class Client - def initialize(eval_handler) # :nodoc: - @eval_handler = eval_handler - end - - instance_methods.each do |method| - next if method[/^__.+__$/] - undef_method method - end - - # Executes the specified code at the client. - def eval(code) - @eval_handler.call(code) - end - - # Will execute the specified statement at the client. - def method_missing(method, *args, &block) - if args.empty? and not block - result = eval "#{method}" - else - # This is a bit ugly. The alternative would be using an - # eval context instead of an eval handler for executing - # the code at the client. The problem with that approach - # is that we would have to handle special expressions - # like "self", "nil" or constants ourself which is hard. - remote = eval %{ - result = lambda { |block, *args| #{method}(*args, &block) } - def result.call_with_block(*args, &block) - call(block, *args) - end - result - } - remote.call_with_block(*args, &block) - end - - return result - end - end - - # Returns the source code surrounding the location where the - # breakpoint was issued. - def source_lines(context = 5, return_line_numbers = false) - lines = File.readlines(@__bp_file).map { |line| line.chomp } - - break_line = @__bp_line - start_line = [break_line - context, 1].max - end_line = break_line + context - - result = lines[(start_line - 1) .. (end_line - 1)] - - if return_line_numbers then - return [start_line, break_line, result] - else - return result - end - end - - # Lets an object that will forward method calls to the breakpoint - # client. This is useful for outputting longer things at the client - # and so on. You can for example do these things: - # - # client.puts "Hello" # outputs "Hello" at client console - # # outputs "Hello" into the file temp.txt at the client - # client.File.open("temp.txt", "w") { |f| f.puts "Hello" } - def client() - if Breakpoint.use_drb? then - sleep(0.5) until Breakpoint.drb_service.eval_handler - Client.new(Breakpoint.drb_service.eval_handler) - else - Client.new(lambda { |code| eval(code, TOPLEVEL_BINDING) }) - end - end - end - - def handle_breakpoint(context, message, file = "", line = "", &block) # :nodoc: - catch(:debug_return) do |value| - eval(%{ - @__bp_file = #{file.inspect} - @__bp_line = #{line} - extend Breakpoint::CommandBundle - extend DRbUndumped if self - }, context) rescue nil - - if not use_drb? then - puts message - IRB.start(nil, IRB::WorkSpace.new(context)) - else - @drb_service.add_breakpoint(context, message) - end - - block.call if block - end - end - - # These exceptions will be raised on failed asserts - # if Breakpoint.asserts_cause_exceptions is set to - # true. - class FailedAssertError < RuntimeError - end - - # This asserts that the block evaluates to true. - # If it doesn't evaluate to true a breakpoint will - # automatically be created at that execution point. - # - # You can disable assert checking in production - # code by setting Breakpoint.optimize_asserts to - # true. (It will still be enabled when Ruby is run - # via the -d argument.) - # - # Example: - # person_name = "Foobar" - # assert { not person_name.nil? } - # - # Note: If you want to use this method from an - # unit test, you will have to call it by its full - # name, Breakpoint.assert. - def assert(context = nil, &condition) - return if Breakpoint.optimize_asserts and not $DEBUG - return if yield - - callstack = caller - callstack.slice!(0, 3) if callstack.first["assert"] - file, line, method = *callstack.first.match(/^(.+?):(\d+)(?::in `(.*?)')?/).captures - - message = "Assert failed at #{file}:#{line}#{" in `#{method}'" if method}." - - if Breakpoint.asserts_cause_exceptions and not $DEBUG then - raise(Breakpoint::FailedAssertError, message) - end - - message += " Executing implicit breakpoint." - - if context then - return handle_breakpoint(context, message, file, line) - end - - Binding.of_caller do |context| - handle_breakpoint(context, message, file, line) - end - end - - # Whether asserts should be ignored if not in debug mode. - # Debug mode can be enabled by running ruby with the -d - # switch or by setting $DEBUG to true. - attr_accessor :optimize_asserts - self.optimize_asserts = false - - # Whether an Exception should be raised on failed asserts - # in non-$DEBUG code or not. By default this is disabled. - attr_accessor :asserts_cause_exceptions - self.asserts_cause_exceptions = false - @use_drb = false - - attr_reader :drb_service # :nodoc: - - class DRbService # :nodoc: - include DRbUndumped - - def initialize - @handler = @eval_handler = @collision_handler = nil - - IRB.instance_eval { @CONF[:RC] = true } - IRB.run_config - end - - def collision - sleep(0.5) until @collision_handler - - @collision_handler.call - end - - def ping() end - - def add_breakpoint(context, message) - workspace = IRB::WorkSpace.new(context) - workspace.extend(DRbUndumped) - - sleep(0.5) until @handler - - @handler.call(workspace, message) - end - - attr_accessor :handler, :eval_handler, :collision_handler - end - - # Will run Breakpoint in DRb mode. This will spawn a server - # that can be attached to via the breakpoint-client command - # whenever a breakpoint is executed. This is useful when you - # are debugging CGI applications or other applications where - # you can't access debug sessions via the standard input and - # output of your application. - # - # You can specify an URI where the DRb server will run at. - # This way you can specify the port the server runs on. The - # default URI is druby://localhost:42531. - # - # Please note that breakpoints will be skipped silently in - # case the DRb server can not spawned. (This can happen if - # the port is already used by another instance of your - # application on CGI or another application.) - # - # Also note that by default this will only allow access - # from localhost. You can however specify a list of - # allowed hosts or nil (to allow access from everywhere). - # But that will still not protect you from somebody - # reading the data as it goes through the net. - # - # A good approach for getting security and remote access - # is setting up an SSH tunnel between the DRb service - # and the client. This is usually done like this: - # - # $ ssh -L20000:127.0.0.1:20000 -R10000:127.0.0.1:10000 example.com - # (This will connect port 20000 at the client side to port - # 20000 at the server side, and port 10000 at the server - # side to port 10000 at the client side.) - # - # After that do this on the server side: (the code being debugged) - # Breakpoint.activate_drb("druby://127.0.0.1:20000", "localhost") - # - # And at the client side: - # ruby breakpoint_client.rb -c druby://127.0.0.1:10000 -s druby://127.0.0.1:20000 - # - # Running through such a SSH proxy will also let you use - # breakpoint.rb in case you are behind a firewall. - # - # Detailed information about running DRb through firewalls is - # available at http://www.rubygarden.org/ruby?DrbTutorial - def activate_drb(uri = nil, allowed_hosts = ['localhost', '127.0.0.1', '::1'], - ignore_collisions = false) - - return false if @use_drb - - uri ||= 'druby://localhost:42531' - - if allowed_hosts then - acl = ["deny", "all"] - - Array(allowed_hosts).each do |host| - acl += ["allow", host] - end - - DRb.install_acl(ACL.new(acl)) - end - - @use_drb = true - @drb_service = DRbService.new - did_collision = false - begin - @service = DRb.start_service(uri, @drb_service) - rescue Errno::EADDRINUSE - if ignore_collisions then - nil - else - # The port is already occupied by another - # Breakpoint service. We will try to tell - # the old service that we want its port. - # It will then forward that request to the - # user and retry. - unless did_collision then - DRbObject.new(nil, uri).collision - did_collision = true - end - sleep(10) - retry - end - end - - return true - end - - # Deactivates a running Breakpoint service. - def deactivate_drb - @service.stop_service unless @service.nil? - @service = nil - @use_drb = false - @drb_service = nil - end - - # Returns true when Breakpoints are used over DRb. - # Breakpoint.activate_drb causes this to be true. - def use_drb? - @use_drb == true - end -end - -module IRB # :nodoc: - class << self; remove_method :start; end - def self.start(ap_path = nil, main_context = nil, workspace = nil) - $0 = File::basename(ap_path, ".rb") if ap_path - - # suppress some warnings about redefined constants - old_verbose, $VERBOSE = $VERBOSE, nil - IRB.setup(ap_path) - $VERBOSE = old_verbose - - if @CONF[:SCRIPT] then - irb = Irb.new(main_context, @CONF[:SCRIPT]) - else - irb = Irb.new(main_context) - end - - if workspace then - irb.context.workspace = workspace - end - - @CONF[:IRB_RC].call(irb.context) if @CONF[:IRB_RC] - @CONF[:MAIN_CONTEXT] = irb.context - - old_sigint = trap("SIGINT") do - begin - irb.signal_handle - rescue RubyLex::TerminateLineInput - # ignored - end - end - - catch(:IRB_EXIT) do - irb.eval_input - end - ensure - trap("SIGINT", old_sigint) - end - - class << self - alias :old_CurrentContext :CurrentContext - remove_method :CurrentContext - end - def IRB.CurrentContext - if old_CurrentContext.nil? and Breakpoint.use_drb? then - result = Object.new - def result.last_value; end - return result - else - old_CurrentContext - end - end - - class Context - alias :old_evaluate :evaluate - def evaluate(line, line_no) - if line.chomp == "exit" then - exit - else - old_evaluate(line, line_no) - end - end - end - - class WorkSpace - alias :old_evaluate :evaluate - - def evaluate(*args) - if Breakpoint.use_drb? then - result = old_evaluate(*args) - if args[0] != :no_proxy and - not [true, false, nil].include?(result) - then - result.extend(DRbUndumped) rescue nil - end - return result - else - old_evaluate(*args) - end - end - end - - module InputCompletor - def self.eval(code, context, *more) - # Big hack, this assumes that InputCompletor - # will only call eval() when it wants code - # to be executed in the IRB context. - IRB.conf[:MAIN_CONTEXT].workspace.evaluate(:no_proxy, code, *more) - end - end -end - -module DRb # :nodoc: - class DRbObject - undef :inspect if method_defined?(:inspect) - undef :clone if method_defined?(:clone) - end -end - -# See Breakpoint.breakpoint -def breakpoint(id = nil, &block) - Binding.of_caller do |context| - Breakpoint.breakpoint(id, context, &block) - end -end - -# See Breakpoint.assert -def assert(&block) - Binding.of_caller do |context| - Breakpoint.assert(context, &block) - end -end +# The Breakpoint library provides the convenience of +# being able to inspect and modify state, diagnose +# bugs all via IRB by simply setting breakpoints in +# your applications by the call of a method. +# +# This library was written and is supported by me, +# Florian Gross. I can be reached at flgr@ccan.de +# and enjoy getting feedback about my libraries. +# +# The whole library (including breakpoint_client.rb +# and binding_of_caller.rb) is licensed under the +# same license that Ruby uses. (Which is currently +# either the GNU General Public License or a custom +# one that allows for commercial usage.) If you for +# some good reason need to use this under another +# license please contact me. + +require 'irb' +require File.dirname(__FILE__) + '/binding_of_caller' +require 'drb' +require 'drb/acl' + +module Breakpoint + id = %q$Id: breakpoint.rb 41 2005-01-22 20:22:10Z flgr $ + Version = id.split(" ")[2].to_i + + extend self + + # This will pop up an interactive ruby session at a + # pre-defined break point in a Ruby application. In + # this session you can examine the environment of + # the break point. + # + # You can get a list of variables in the context using + # local_variables via +local_variables+. You can then + # examine their values by typing their names. + # + # You can have a look at the call stack via +caller+. + # + # The source code around the location where the breakpoint + # was executed can be examined via +source_lines+. Its + # argument specifies how much lines of context to display. + # The default amount of context is 5 lines. Note that + # the call to +source_lines+ can raise an exception when + # it isn't able to read in the source code. + # + # breakpoints can also return a value. They will execute + # a supplied block for getting a default return value. + # A custom value can be returned from the session by doing + # +throw(:debug_return, value)+. + # + # You can also give names to break points which will be + # used in the message that is displayed upon execution + # of them. + # + # Here's a sample of how breakpoints should be placed: + # + # class Person + # def initialize(name, age) + # @name, @age = name, age + # breakpoint("Person#initialize") + # end + # + # attr_reader :age + # def name + # breakpoint("Person#name") { @name } + # end + # end + # + # person = Person.new("Random Person", 23) + # puts "Name: #{person.name}" + # + # And here is a sample debug session: + # + # Executing break point "Person#initialize" at file.rb:4 in `initialize' + # irb(#):001:0> local_variables + # => ["name", "age", "_", "__"] + # irb(#):002:0> [name, age] + # => ["Random Person", 23] + # irb(#):003:0> [@name, @age] + # => ["Random Person", 23] + # irb(#):004:0> self + # => # + # irb(#):005:0> @age += 1; self + # => # + # irb(#):006:0> exit + # Executing break point "Person#name" at file.rb:9 in `name' + # irb(#):001:0> throw(:debug_return, "Overriden name") + # Name: Overriden name + # + # Breakpoint sessions will automatically have a few + # convenience methods available. See Breakpoint::CommandBundle + # for a list of them. + # + # Breakpoints can also be used remotely over sockets. + # This is implemented by running part of the IRB session + # in the application and part of it in a special client. + # You have to call Breakpoint.activate_drb to enable + # support for remote breakpoints and then run + # breakpoint_client.rb which is distributed with this + # library. See the documentation of Breakpoint.activate_drb + # for details. + def breakpoint(id = nil, context = nil, &block) + callstack = caller + callstack.slice!(0, 3) if callstack.first["breakpoint"] + file, line, method = *callstack.first.match(/^(.+?):(\d+)(?::in `(.*?)')?/).captures + + message = "Executing break point " + (id ? "#{id.inspect} " : "") + + "at #{file}:#{line}" + (method ? " in `#{method}'" : "") + + if context then + return handle_breakpoint(context, message, file, line, &block) + end + + Binding.of_caller do |binding_context| + handle_breakpoint(binding_context, message, file, line, &block) + end + end + + module CommandBundle + # Proxy to a Breakpoint client. Lets you directly execute code + # in the context of the client. + class Client + def initialize(eval_handler) # :nodoc: + @eval_handler = eval_handler + end + + instance_methods.each do |method| + next if method[/^__.+__$/] + undef_method method + end + + # Executes the specified code at the client. + def eval(code) + @eval_handler.call(code) + end + + # Will execute the specified statement at the client. + def method_missing(method, *args, &block) + if args.empty? and not block + result = eval "#{method}" + else + # This is a bit ugly. The alternative would be using an + # eval context instead of an eval handler for executing + # the code at the client. The problem with that approach + # is that we would have to handle special expressions + # like "self", "nil" or constants ourself which is hard. + remote = eval %{ + result = lambda { |block, *args| #{method}(*args, &block) } + def result.call_with_block(*args, &block) + call(block, *args) + end + result + } + remote.call_with_block(*args, &block) + end + + return result + end + end + + # Returns the source code surrounding the location where the + # breakpoint was issued. + def source_lines(context = 5, return_line_numbers = false) + lines = File.readlines(@__bp_file).map { |line| line.chomp } + + break_line = @__bp_line + start_line = [break_line - context, 1].max + end_line = break_line + context + + result = lines[(start_line - 1) .. (end_line - 1)] + + if return_line_numbers then + return [start_line, break_line, result] + else + return result + end + end + + # Lets an object that will forward method calls to the breakpoint + # client. This is useful for outputting longer things at the client + # and so on. You can for example do these things: + # + # client.puts "Hello" # outputs "Hello" at client console + # # outputs "Hello" into the file temp.txt at the client + # client.File.open("temp.txt", "w") { |f| f.puts "Hello" } + def client() + if Breakpoint.use_drb? then + sleep(0.5) until Breakpoint.drb_service.eval_handler + Client.new(Breakpoint.drb_service.eval_handler) + else + Client.new(lambda { |code| eval(code, TOPLEVEL_BINDING) }) + end + end + end + + def handle_breakpoint(context, message, file = "", line = "", &block) # :nodoc: + catch(:debug_return) do |value| + eval(%{ + @__bp_file = #{file.inspect} + @__bp_line = #{line} + extend Breakpoint::CommandBundle + extend DRbUndumped if self + }, context) rescue nil + + if not use_drb? then + puts message + IRB.start(nil, IRB::WorkSpace.new(context)) + else + @drb_service.add_breakpoint(context, message) + end + + block.call if block + end + end + + # These exceptions will be raised on failed asserts + # if Breakpoint.asserts_cause_exceptions is set to + # true. + class FailedAssertError < RuntimeError + end + + # This asserts that the block evaluates to true. + # If it doesn't evaluate to true a breakpoint will + # automatically be created at that execution point. + # + # You can disable assert checking in production + # code by setting Breakpoint.optimize_asserts to + # true. (It will still be enabled when Ruby is run + # via the -d argument.) + # + # Example: + # person_name = "Foobar" + # assert { not person_name.nil? } + # + # Note: If you want to use this method from an + # unit test, you will have to call it by its full + # name, Breakpoint.assert. + def assert(context = nil, &condition) + return if Breakpoint.optimize_asserts and not $DEBUG + return if yield + + callstack = caller + callstack.slice!(0, 3) if callstack.first["assert"] + file, line, method = *callstack.first.match(/^(.+?):(\d+)(?::in `(.*?)')?/).captures + + message = "Assert failed at #{file}:#{line}#{" in `#{method}'" if method}." + + if Breakpoint.asserts_cause_exceptions and not $DEBUG then + raise(Breakpoint::FailedAssertError, message) + end + + message += " Executing implicit breakpoint." + + if context then + return handle_breakpoint(context, message, file, line) + end + + Binding.of_caller do |context| + handle_breakpoint(context, message, file, line) + end + end + + # Whether asserts should be ignored if not in debug mode. + # Debug mode can be enabled by running ruby with the -d + # switch or by setting $DEBUG to true. + attr_accessor :optimize_asserts + self.optimize_asserts = false + + # Whether an Exception should be raised on failed asserts + # in non-$DEBUG code or not. By default this is disabled. + attr_accessor :asserts_cause_exceptions + self.asserts_cause_exceptions = false + @use_drb = false + + attr_reader :drb_service # :nodoc: + + class DRbService # :nodoc: + include DRbUndumped + + def initialize + @handler = @eval_handler = @collision_handler = nil + + IRB.instance_eval { @CONF[:RC] = true } + IRB.run_config + end + + def collision + sleep(0.5) until @collision_handler + + @collision_handler.call + end + + def ping() end + + def add_breakpoint(context, message) + workspace = IRB::WorkSpace.new(context) + workspace.extend(DRbUndumped) + + sleep(0.5) until @handler + + @handler.call(workspace, message) + end + + attr_accessor :handler, :eval_handler, :collision_handler + end + + # Will run Breakpoint in DRb mode. This will spawn a server + # that can be attached to via the breakpoint-client command + # whenever a breakpoint is executed. This is useful when you + # are debugging CGI applications or other applications where + # you can't access debug sessions via the standard input and + # output of your application. + # + # You can specify an URI where the DRb server will run at. + # This way you can specify the port the server runs on. The + # default URI is druby://localhost:42531. + # + # Please note that breakpoints will be skipped silently in + # case the DRb server can not spawned. (This can happen if + # the port is already used by another instance of your + # application on CGI or another application.) + # + # Also note that by default this will only allow access + # from localhost. You can however specify a list of + # allowed hosts or nil (to allow access from everywhere). + # But that will still not protect you from somebody + # reading the data as it goes through the net. + # + # A good approach for getting security and remote access + # is setting up an SSH tunnel between the DRb service + # and the client. This is usually done like this: + # + # $ ssh -L20000:127.0.0.1:20000 -R10000:127.0.0.1:10000 example.com + # (This will connect port 20000 at the client side to port + # 20000 at the server side, and port 10000 at the server + # side to port 10000 at the client side.) + # + # After that do this on the server side: (the code being debugged) + # Breakpoint.activate_drb("druby://127.0.0.1:20000", "localhost") + # + # And at the client side: + # ruby breakpoint_client.rb -c druby://127.0.0.1:10000 -s druby://127.0.0.1:20000 + # + # Running through such a SSH proxy will also let you use + # breakpoint.rb in case you are behind a firewall. + # + # Detailed information about running DRb through firewalls is + # available at http://www.rubygarden.org/ruby?DrbTutorial + def activate_drb(uri = nil, allowed_hosts = ['localhost', '127.0.0.1', '::1'], + ignore_collisions = false) + + return false if @use_drb + + uri ||= 'druby://localhost:42531' + + if allowed_hosts then + acl = ["deny", "all"] + + Array(allowed_hosts).each do |host| + acl += ["allow", host] + end + + DRb.install_acl(ACL.new(acl)) + end + + @use_drb = true + @drb_service = DRbService.new + did_collision = false + begin + @service = DRb.start_service(uri, @drb_service) + rescue Errno::EADDRINUSE + if ignore_collisions then + nil + else + # The port is already occupied by another + # Breakpoint service. We will try to tell + # the old service that we want its port. + # It will then forward that request to the + # user and retry. + unless did_collision then + DRbObject.new(nil, uri).collision + did_collision = true + end + sleep(10) + retry + end + end + + return true + end + + # Deactivates a running Breakpoint service. + def deactivate_drb + @service.stop_service unless @service.nil? + @service = nil + @use_drb = false + @drb_service = nil + end + + # Returns true when Breakpoints are used over DRb. + # Breakpoint.activate_drb causes this to be true. + def use_drb? + @use_drb == true + end +end + +module IRB # :nodoc: + class << self; remove_method :start; end + def self.start(ap_path = nil, main_context = nil, workspace = nil) + $0 = File::basename(ap_path, ".rb") if ap_path + + # suppress some warnings about redefined constants + old_verbose, $VERBOSE = $VERBOSE, nil + IRB.setup(ap_path) + $VERBOSE = old_verbose + + if @CONF[:SCRIPT] then + irb = Irb.new(main_context, @CONF[:SCRIPT]) + else + irb = Irb.new(main_context) + end + + if workspace then + irb.context.workspace = workspace + end + + @CONF[:IRB_RC].call(irb.context) if @CONF[:IRB_RC] + @CONF[:MAIN_CONTEXT] = irb.context + + old_sigint = trap("SIGINT") do + begin + irb.signal_handle + rescue RubyLex::TerminateLineInput + # ignored + end + end + + catch(:IRB_EXIT) do + irb.eval_input + end + ensure + trap("SIGINT", old_sigint) + end + + class << self + alias :old_CurrentContext :CurrentContext + remove_method :CurrentContext + end + def IRB.CurrentContext + if old_CurrentContext.nil? and Breakpoint.use_drb? then + result = Object.new + def result.last_value; end + return result + else + old_CurrentContext + end + end + + class Context + alias :old_evaluate :evaluate + def evaluate(line, line_no) + if line.chomp == "exit" then + exit + else + old_evaluate(line, line_no) + end + end + end + + class WorkSpace + alias :old_evaluate :evaluate + + def evaluate(*args) + if Breakpoint.use_drb? then + result = old_evaluate(*args) + if args[0] != :no_proxy and + not [true, false, nil].include?(result) + then + result.extend(DRbUndumped) rescue nil + end + return result + else + old_evaluate(*args) + end + end + end + + module InputCompletor + def self.eval(code, context, *more) + # Big hack, this assumes that InputCompletor + # will only call eval() when it wants code + # to be executed in the IRB context. + IRB.conf[:MAIN_CONTEXT].workspace.evaluate(:no_proxy, code, *more) + end + end +end + +module DRb # :nodoc: + class DRbObject + undef :inspect if method_defined?(:inspect) + undef :clone if method_defined?(:clone) + end +end + +# See Breakpoint.breakpoint +def breakpoint(id = nil, &block) + Binding.of_caller do |context| + Breakpoint.breakpoint(id, context, &block) + end +end + +# See Breakpoint.assert +def assert(&block) + Binding.of_caller do |context| + Breakpoint.assert(context, &block) + end +end -- cgit v1.2.3