<?php

/**
 * @file mod/post.php
 *
 * @brief Zot endpoint.
 *
 */

require_once('include/zot.php');

/**
 * @brief HTTP POST entry point for Zot.
 *
 * Most access to this endpoint is via the post method.
 * Here we will pick out the magic auth params which arrive as a get request,
 * and the only communications to arrive this way.
 *
 * Magic Auth
 * ==========
 *
 * So-called "magic auth" takes place by a special exchange. On the site where the "channel to be authenticated" lives (e.g. $mysite), 
 * a redirection is made via $mysite/magic to the zot endpoint of the remote site ($remotesite) with special GET parameters.
 *
 * The endpoint is typically  https://$remotesite/post - or whatever was specified as the callback url in prior communications
 * (we will bootstrap an address and fetch a zot info packet if possible where no prior communications exist)
 *
 * Five GET parameters are supplied:
 * * auth => the urlencoded webbie (channel@host.domain) of the channel requesting access
 * * dest => the desired destination URL (urlencoded)
 * * sec  => a random string which is also stored on $mysite for use during the verification phase. 
 * * version => the zot revision
 * * delegate => optional urlencoded webbie of a local channel to invoke delegation rights for
 *
 * When this packet is received, an "auth-check" zot message is sent to $mysite.
 * (e.g. if $_GET['auth'] is foobar@podunk.edu, a zot packet is sent to the podunk.edu zot endpoint, which is typically /post)
 * If no information has been recorded about the requesting identity a zot information packet will be retrieved before
 * continuing.
 *
 * The sender of this packet is an arbitrary/random site channel. The recipients will be a single recipient corresponding
 * to the guid and guid_sig we have associated with the requesting auth identity
 *
 * \code{.json}
 * {
 *   "type":"auth_check",
 *   "sender":{
 *     "guid":"kgVFf_...",
 *     "guid_sig":"PT9-TApz...",
 *     "url":"http:\/\/podunk.edu",
 *     "url_sig":"T8Bp7j..."
 *   },
 *   "recipients":{
 *     {
 *       "guid":"ZHSqb...",
 *       "guid_sig":"JsAAXi..."
 *     }
 *   }
 *   "callback":"\/post",
 *   "version":1,
 *   "secret":"1eaa661",
 *   "secret_sig":"eKV968b1..."
 * }
 * \endcode
 *
 * auth_check messages MUST use encapsulated encryption. This message is sent to the origination site, which checks the 'secret' to see 
 * if it is the same as the 'sec' which it passed originally. It also checks the secret_sig which is the secret signed by the 
 * destination channel's private key and base64url encoded. If everything checks out, a json packet is returned:
 *
 * \code{.json}
 * {
 *   "success":1,
 *   "confirm":"q0Ysovd1u...",
 *   "service_class":(optional)
 *   "level":(optional)
 * }
 * \endcode
 *
 * 'confirm' in this case is the base64url encoded RSA signature of the concatenation of 'secret' with the
 * base64url encoded whirlpool hash of the requestor's guid and guid_sig; signed with the source channel private key. 
 * This prevents a man-in-the-middle from inserting a rogue success packet. Upon receipt and successful 
 * verification of this packet, the destination site will redirect to the original destination URL and indicate a successful remote login. 
 * Service_class can be used by cooperating sites to provide different access rights based on account rights and subscription plans. It is 
 * a string whose contents are not defined by protocol. Example: "basic" or "gold".
 *
 * @param[in,out] App &$a
 */
function post_init(&$a) {

	if (array_key_exists('auth', $_REQUEST)) {

		$ret = array('success' => false, 'message' => '');

		logger('mod_zot: auth request received.');
		$address  = $_REQUEST['auth'];
		$desturl  = $_REQUEST['dest'];
		$sec      = $_REQUEST['sec'];
		$version  = $_REQUEST['version'];
		$delegate = $_REQUEST['delegate'];

		$test     = ((x($_REQUEST, 'test')) ? intval($_REQUEST['test']) : 0);

		// They are authenticating ultimately to the site and not to a particular channel.
		// Any channel will do, providing it's currently active. We just need to have an 
		// identity to attach to the packet we send back. So find one. 

		$c = q("select * from channel where not ( channel_pageflags & %d )>0 limit 1",
			intval(PAGE_REMOVED)
		);

		if (! $c) {
			// nobody here
			logger('mod_zot: auth: unable to find a response channel');
			if ($test) {
				$ret['message'] .= 'no local channels found.' . EOL;
				json_return_and_die($ret);
			}

			goaway($desturl);
		}

		// Try and find a hubloc for the person attempting to auth
		$x = q("select * from hubloc left join xchan on xchan_hash = hubloc_hash where hubloc_addr = '%s' order by hubloc_id desc",
			dbesc($address)
		);

		if (! $x) {
			// finger them if they can't be found. 
			$ret = zot_finger($address, null);
			if ($ret['success']) {
				$j = json_decode($ret['body'], true);
				if ($j)
					import_xchan($j);
				$x = q("select * from hubloc left join xchan on xchan_hash = hubloc_hash where hubloc_addr = '%s' order by hubloc_id desc",
					dbesc($address)
				);
			}
		}
		if(! $x) {
			logger('mod_zot: auth: unable to finger ' . $address);

			if($test) {
				$ret['message'] .= 'no hubloc found for ' . $address . ' and probing failed.' . EOL;
				json_return_and_die($ret);
			}

			goaway($desturl);
		}


		foreach($x as $xx) {
			logger('mod_zot: auth request received from ' . $xx['hubloc_addr'] ); 

			// check credentials and access

			// If they are already authenticated and haven't changed credentials, 
			// we can save an expensive network round trip and improve performance.

			$remote = remote_channel();
			$result = null;
			$remote_service_class = '';
			$remote_level = 0;
			$remote_hub = $xx['hubloc_url'];
			$DNT = 0;

			// Also check that they are coming from the same site as they authenticated with originally.

			$already_authed = ((($remote) && ($xx['hubloc_hash'] == $remote) && ($xx['hubloc_url'] === $_SESSION['remote_hub'])) ? true : false); 
			if($delegate && $delegate !== $_SESSION['delegate_channel'])
				$already_authed = false;

			$j = array();

			if (! $already_authed) {

				// Auth packets MUST use ultra top-secret hush-hush mode - e.g. the entire packet is encrypted using the site private key
				// The actual channel sending the packet ($c[0]) is not important, but this provides a generic zot packet with a sender
				// which can be verified
 
				$p = zot_build_packet($c[0],$type = 'auth_check', array(array('guid' => $xx['hubloc_guid'],'guid_sig' => $xx['hubloc_guid_sig'])), $xx['hubloc_sitekey'], $sec);
				if ($test) {
					$ret['message'] .= 'auth check packet created using sitekey ' . $xx['hubloc_sitekey'] . EOL;
					$ret['message'] .= 'packet contents: ' . $p . EOL;
				}

				$result = zot_zot($xx['hubloc_callback'],$p);

				if (! $result['success']) {
					logger('mod_zot: auth_check callback failed.');
					if ($test) {
						$ret['message'] .= 'auth check request to your site returned .' . print_r($result, true) . EOL;
						continue;
					}
					continue;
				}
				$j = json_decode($result['body'], true);
				if (! $j) {
					logger('mod_zot: auth_check json data malformed.');
					if($test) {
						$ret['message'] .= 'json malformed: ' . $result['body'] . EOL;
						continue;
					}
				}
			}

			if ($test) {
				$ret['message'] .= 'auth check request returned .' . print_r($j, true) . EOL;
			}

			if ($already_authed || $j['success']) {
				if ($j['success']) {
					// legit response, but we do need to check that this wasn't answered by a man-in-middle
					if (! rsa_verify($sec . $xx['xchan_hash'],base64url_decode($j['confirm']),$xx['xchan_pubkey'])) {
						logger('mod_zot: auth: final confirmation failed.');
						if ($test) {
							$ret['message'] .= 'final confirmation failed. ' . $sec . print_r($j,true) . print_r($xx,true);
							continue;
						}

						continue;
					}
					if (array_key_exists('service_class',$j))
						$remote_service_class = $j['service_class'];
					if (array_key_exists('level',$j))
						$remote_level = $j['level'];
					if (array_key_exists('DNT',$j))
						$DNT = $j['DNT'];
				}
				// everything is good... maybe
				if(local_channel()) {

					// tell them to logout if they're logged in locally as anything but the target remote account
					// in which case just shut up because they don't need to be doing this at all.

					if ($a->channel['channel_hash'] != $xx['xchan_hash']) {
						logger('mod_zot: auth: already authenticated locally as somebody else.');
						notice( t('Remote authentication blocked. You are logged into this site locally. Please logout and retry.') . EOL);
						if ($test) {
							$ret['message'] .= 'already logged in locally with a conflicting identity.' . EOL;
							continue;
						}
					}
					continue;
				}

				// log them in

				if ($test) {
					$ret['success'] = true;
					$ret['message'] .= 'Authentication Success!' . EOL;
					json_return_and_die($ret);
				}

				$delegation_success = false;
				if ($delegate) {
					$r = q("select * from channel left join xchan on channel_hash = xchan_hash where xchan_addr = '%s' limit 1",
						dbesc($delegate)
					);
					if ($r && intval($r[0]['channel_id'])) {
						$allowed = perm_is_allowed($r[0]['channel_id'],$xx['xchan_hash'],'delegate');
						if ($allowed) {
							$_SESSION['delegate_channel'] = $r[0]['channel_id'];
							$_SESSION['delegate'] = $xx['xchan_hash'];
							$_SESSION['account_id'] = intval($r[0]['channel_account_id']);
							require_once('include/security.php');
							change_channel($r[0]['channel_id']);
							$delegation_success = true;
						}
					}
				}

				$_SESSION['authenticated'] = 1;
				if (! $delegation_success) {
					$_SESSION['visitor_id'] = $xx['xchan_hash'];
					$_SESSION['my_url'] = $xx['xchan_url'];
					$_SESSION['my_address'] = $address;
					$_SESSION['remote_service_class'] = $remote_service_class;
					$_SESSION['remote_level'] = $remote_level;
					$_SESSION['remote_hub'] = $remote_hub;
					$_SESSION['DNT'] = $DNT;
				}

				$arr = array('xchan' => $xx, 'url' => $desturl, 'session' => $_SESSION);
				call_hooks('magic_auth_success',$arr);
				$a->set_observer($xx);
				require_once('include/security.php');
				$a->set_groups(init_groups_visitor($_SESSION['visitor_id']));
				info(sprintf( t('Welcome %s. Remote authentication successful.'),$xx['xchan_name']));
				logger('mod_zot: auth success from ' . $xx['xchan_addr']); 
				q("update hubloc set hubloc_status =  (hubloc_status | %d ) where hubloc_id = %d ",
						intval(HUBLOC_WORKS),
						intval($xx['hubloc_id'])
				);
			} else {
				if ($test) {
					$ret['message'] .= 'auth failure. ' . print_r($_REQUEST,true) . print_r($j,true) . EOL;
					continue;
				}
				logger('mod_zot: magic-auth failure - not authenticated: ' . $xx['xchan_addr']);
				q("update hubloc set hubloc_status =  (hubloc_status | %d ) where hubloc_id = %d ",
					intval(HUBLOC_RECEIVE_ERROR),
					intval($xx['hubloc_id'])
				);
			}

			if ($test) {
				$ret['message'] .= 'auth failure fallthrough ' . print_r($_REQUEST,true) . print_r($j,true) . EOL;
				continue;
			}
		}


		/**
		 * @FIXME we really want to save the return_url in the session before we
		 * visit rmagic. This does however prevent a recursion if you visit
		 * rmagic directly, as it would otherwise send you back here again.
		 * But z_root() probably isn't where you really want to go.
		 */

		if(strstr($desturl,z_root() . '/rmagic'))
			goaway(z_root());

		if ($test) {
			json_return_and_die($ret);
		}

		goaway($desturl);
	}
}


/**
 * @brief zot communications and messaging.
 *
 * Sender HTTP posts to this endpoint ($site/post typically) with 'data' parameter set to json zot message packet.
 * This packet is optionally encrypted, which we will discover if the json has an 'iv' element.
 * $contents => array( 'alg' => 'aes256cbc', 'iv' => initialisation vector, 'key' => decryption key, 'data' => encrypted data);
 * $contents->iv and $contents->key are random strings encrypted with this site's RSA public key and then base64url encoded.
 * Currently only 'aes256cbc' is used, but this is extensible should that algorithm prove inadequate.
 *
 * Once decrypted, one will find the normal json_encoded zot message packet.
 * 
 * Defined packet types are: notify, purge, refresh, force_refresh, auth_check, ping, and pickup 
 *
 * Standard packet: (used by notify, purge, refresh, force_refresh, and auth_check)
 * \code{.json}
 * {
 *   "type": "notify",
 *   "sender":{
 *     "guid":"kgVFf_1...",
 *     "guid_sig":"PT9-TApzp...",
 *     "url":"http:\/\/podunk.edu",
 *     "url_sig":"T8Bp7j5...",
 *   },
 *   "recipients": { optional recipient array },
 *   "callback":"\/post",
 *   "version":1,
 *   "secret":"1eaa...",
 *   "secret_sig": "df89025470fac8..."
 * }
 * \endcode
 *
 * Signature fields are all signed with the sender channel private key and base64url encoded.
 * Recipients are arrays of guid and guid_sig, which were previously signed with the recipients private 
 * key and base64url encoded and later obtained via channel discovery. Absence of recipients indicates
 * a public message or visible to all potential listeners on this site.
 *
 * "pickup" packet:
 * The pickup packet is sent in response to a notify packet from another site
 * \code{.json}
 * {
 *   "type":"pickup",
 *   "url":"http:\/\/example.com",
 *   "callback":"http:\/\/example.com\/post",
 *   "callback_sig":"teE1_fLI...",
 *   "secret":"1eaa...",
 *   "secret_sig":"O7nB4_..."
 * }
 * \endcode
 *
 * In the pickup packet, the sig fields correspond to the respective data
 * element signed with this site's system private key and then base64url encoded.
 * The "secret" is the same as the original secret from the notify packet. 
 *
 * If verification is successful, a json structure is returned containing a
 * success indicator and an array of type 'pickup'.
 * Each pickup element contains the original notify request and a message field
 * whose contents are dependent on the message type.
 *
 * This JSON array is AES encapsulated using the site public key of the site
 * that sent the initial zot pickup packet.
 * Using the above example, this would be example.com.
 *
 * \code{.json}
 * {
 *   "success":1,
 *   "pickup":{
 *     "notify":{
 *       "type":"notify",
 *       "sender":{
 *         "guid":"kgVFf_...",
 *         "guid_sig":"PT9-TApz...",
 *         "url":"http:\/\/z.podunk.edu",
 *         "url_sig":"T8Bp7j5D..."
 *       },
 *       "callback":"\/post",
 *       "version":1,
 *       "secret":"1eaa661..."
 *     },
 *     "message":{
 *       "type":"activity",
 *       "message_id":"10b049ce384cbb2da9467319bc98169ab36290b8bbb403aa0c0accd9cb072e76@podunk.edu",
 *       "message_top":"10b049ce384cbb2da9467319bc98169ab36290b8bbb403aa0c0accd9cb072e76@podunk.edu",
 *       "message_parent":"10b049ce384cbb2da9467319bc98169ab36290b8bbb403aa0c0accd9cb072e76@podunk.edu",
 *       "created":"2012-11-20 04:04:16",
 *       "edited":"2012-11-20 04:04:16",
 *       "title":"",
 *       "body":"Hi Nickordo",
 *       "app":"",
 *       "verb":"post",
 *       "object_type":"",
 *       "target_type":"",
 *       "permalink":"",
 *       "location":"",
 *       "longlat":"",
 *       "owner":{
 *         "name":"Indigo",
 *         "address":"indigo@podunk.edu",
 *         "url":"http:\/\/podunk.edu",
 *         "photo":{
 *           "mimetype":"image\/jpeg",
 *           "src":"http:\/\/podunk.edu\/photo\/profile\/m\/5"
 *         },
 *         "guid":"kgVFf_...",
 *         "guid_sig":"PT9-TAp...",
 *       },
 *       "author":{
 *         "name":"Indigo",
 *         "address":"indigo@podunk.edu",
 *         "url":"http:\/\/podunk.edu",
 *         "photo":{
 *           "mimetype":"image\/jpeg",
 *           "src":"http:\/\/podunk.edu\/photo\/profile\/m\/5"
 *         },
 *         "guid":"kgVFf_...",
 *         "guid_sig":"PT9-TAp..."
 *       }
 *     }
 *   }
 * }
 * \endcode
 *
 * Currently defined message types are 'activity', 'mail', 'profile', 'location'
 * and 'channel_sync', which each have different content schemas.
 *
 * Ping packet:
 * A ping packet does not require any parameters except the type. It may or may
 * not be encrypted.
 *
 * \code{.json}
 * {
 *   "type": "ping"
 * }
 * \endcode
 *
 * On receipt of a ping packet a ping response will be returned:
 *
 * \code{.json}
 * {
 *   "success" : 1,
 *   "site" {
 *     "url": "http:\/\/podunk.edu",
 *     "url_sig": "T8Bp7j5...",
 *     "sitekey": "-----BEGIN PUBLIC KEY-----
 *                 MIICIjANBgkqhkiG9w0BAQE..."
 *   }
 * }
 * \endcode
 *
 * The ping packet can be used to verify that a site has not been re-installed, and to 
 * initiate corrective action if it has. The url_sig is signed with the site private key
 * and base64url encoded - and this should verify with the enclosed sitekey. Failure to
 * verify indicates the site is corrupt or otherwise unable to communicate using zot.
 * This return packet is not otherwise verified, so should be compared with other
 * results obtained from this site which were verified prior to taking action. For instance
 * if you have one verified result with this signature and key, and other records for this 
 * url which have different signatures and keys, it indicates that the site was re-installed
 * and corrective action may commence (remove or mark invalid any entries with different
 * signatures).
 * If you have no records which match this url_sig and key - no corrective action should
 * be taken as this packet may have been returned by an imposter.  
 *
 * @param[in,out] App &$a
 */
function post_post(&$a) {

	$encrypted_packet = false;
	$ret = array('success' => false);

	$data = json_decode($_REQUEST['data'],true);

	/*
	 * Many message packets will arrive encrypted. The existence of an 'iv'
	 * element tells us we need to unencapsulate the AES-256-CBC content using
	 * the site private key.
	 */

	if($data && array_key_exists('iv',$data)) {
		$encrypted_packet = true;
		$data = crypto_unencapsulate($data,get_config('system','prvkey'));
		logger('mod_zot: decrypt1: ' . $data, LOGGER_DATA);
		$data = json_decode($data,true);
	}

	if(! $data) {

		// possible Bleichenbacher's attack, just treat it as a 
		// message we have no handler for. It should fail a bit 
		// further along with "no hub". Our public key is public
		// knowledge. There's no reason why anybody should get the 
		// encryption wrong unless they're fishing or hacking. If 
		// they're developing and made a goof, this can be discovered 
		// in the logs of the destination site. If they're fishing or 
		// hacking, the bottom line is we can't verify their hub. 
		// That's all we're going to tell them.

		$data = array('type' => 'bogus');
	}


	$msgtype = ((array_key_exists('type',$data)) ? $data['type'] : '');

	if($msgtype === 'ping') {

		// Useful to get a health check on a remote site.
		// This will let us know if any important communication details
		// that we may have stored are no longer valid, regardless of xchan details.
		logger('POST: got ping send pong now back: ' . z_root() , LOGGER_DEBUG );
 
		$ret['success'] = true;
		$ret['site'] = array();
		$ret['site']['url'] = z_root();
		$ret['site']['url_sig'] = base64url_encode(rsa_sign(z_root(),get_config('system','prvkey')));
		$ret['site']['sitekey'] = get_config('system','pubkey');
		json_return_and_die($ret);
	}


	if($msgtype === 'pickup') {

		/*
		 * The 'pickup' message arrives with a tracking ID which is associated with a particular outq_hash
		 * First verify that that the returned signatures verify, then check that we have an outbound queue item
		 * with the correct hash.
		 * If everything verifies, find any/all outbound messages in the queue for this hubloc and send them back
		 */

		if((! $data['secret']) || (! $data['secret_sig'])) {
			$ret['message'] = 'no verification signature';
			logger('mod_zot: pickup: ' . $ret['message'], LOGGER_DEBUG);
			json_return_and_die($ret);
		}
		$r = q("select distinct hubloc_sitekey from hubloc where hubloc_url = '%s' and hubloc_callback = '%s' and hubloc_sitekey != '' group by hubloc_sitekey ",
			dbesc($data['url']),
			dbesc($data['callback'])
		);
		if(! $r) {
			$ret['message'] = 'site not found';
			logger('mod_zot: pickup: ' . $ret['message']);
			json_return_and_die($ret);
		}

		foreach ($r as $hubsite) {

			// verify the url_sig
			// If the server was re-installed at some point, there could be multiple hubs with the same url and callback.
			// Only one will have a valid key.

			$forgery = true;
			$secret_fail = true;

			$sitekey = $hubsite['hubloc_sitekey'];

			logger('mod_zot: Checking sitekey: ' . $sitekey, LOGGER_DATA);

			if(rsa_verify($data['callback'],base64url_decode($data['callback_sig']),$sitekey)) {
				$forgery = false;
			}
			if(rsa_verify($data['secret'],base64url_decode($data['secret_sig']),$sitekey)) {
				$secret_fail = false;
			}
			if((! $forgery) && (! $secret_fail))
				break;
		}

		if($forgery) {
			$ret['message'] = 'possible site forgery';
			logger('mod_zot: pickup: ' . $ret['message']);
			json_return_and_die($ret);
		}

		if($secret_fail) {
			$ret['message'] = 'secret validation failed';
			logger('mod_zot: pickup: ' . $ret['message']);
			json_return_and_die($ret);
		}

		/*
		 * If we made it to here, the signatures verify, but we still don't know if the tracking ID is valid.
		 * It wouldn't be an error if the tracking ID isn't found, because we may have sent this particular
		 * queue item with another pickup (after the tracking ID for the other pickup  was verified). 
		 */

		$r = q("select outq_posturl from outq where outq_hash = '%s' and outq_posturl = '%s' limit 1",
			dbesc($data['secret']),
			dbesc($data['callback'])
		);
		if(! $r) {
			$ret['message'] = 'nothing to pick up';
			logger('mod_zot: pickup: ' . $ret['message']);
			json_return_and_die($ret);
		}

		/*
		 * Everything is good if we made it here, so find all messages that are going to this location
		 * and send them all.
		 */

		$r = q("select * from outq where outq_posturl = '%s'",
			dbesc($data['callback'])
		);
		if($r) {
			logger('mod_zot: successful pickup message received from ' . $data['callback'] . ' ' . count($r) . ' message(s) picked up', LOGGER_DEBUG);

			$ret['success'] = true;
			$ret['pickup'] = array();
			foreach($r as $rr) {
				if($rr['outq_msg']) {
					$x = json_decode($rr['outq_msg'],true);

					if(! $x)
						continue;

					if(array_key_exists('message_list',$x)) {
						foreach($x['message_list'] as $xx) {
							$ret['pickup'][] = array('notify' => json_decode($rr['outq_notify'],true),'message' => $xx);
						}
					}
					else
						$ret['pickup'][] = array('notify' => json_decode($rr['outq_notify'],true),'message' => $x);

					$x = q("delete from outq where outq_hash = '%s'",
						dbesc($rr['outq_hash'])
					);
				}
			}
		}

		$encrypted = crypto_encapsulate(json_encode($ret),$sitekey);
		json_return_and_die($encrypted);

		/* pickup: end */
	}


	/*
	 * All other message types require us to verify the sender. This is a generic check, so we 
	 * will do it once here and bail if anything goes wrong.
	 */

	if (array_key_exists('sender',$data)) {
		$sender = $data['sender'];
	}

	/* Check if the sender is already verified here */

	$hubs = zot_gethub($sender,true);

	if (! $hubs) {

		/* Have never seen this guid or this guid coming from this location. Check it and register it. */

		// (!!) this will validate the sender
		$result = zot_register_hub($sender);

		if ((! $result['success']) || (! ($hubs = zot_gethub($sender,true)))) {
			$ret['message'] = 'Hub not available.';
			logger('mod_zot: no hub');
			json_return_and_die($ret);
		}
	}


	foreach($hubs as $hub) {

		$sitekey = $hub['hubloc_sitekey'];

		if(array_key_exists('sitekey',$sender) && $sender['sitekey']) {

			/*
			 * This hub has now been proven to be valid.
			 * Any hub with the same URL and a different sitekey cannot be valid.
			 * Get rid of them (mark them deleted). There's a good chance they were re-installs.
			 */

			q("update hubloc set hubloc_flags = ( hubloc_flags | %d ) where hubloc_url = '%s' and hubloc_sitekey != '%s' ",
				intval(HUBLOC_FLAGS_DELETED),
				dbesc($hub['hubloc_url']),
				dbesc($sender['sitekey'])
			);

			$sitekey = $sender['sitekey'];
		}

		// $sender['sitekey'] is a new addition to the protcol to distinguish
		// hublocs coming from re-installed sites. Older sites will not provide
		// this field and we have to still mark them valid, since we can't tell
		// if this hubloc has the same sitekey as the packet we received.

		// Update our DB to show when we last communicated successfully with this hub
		// This will allow us to prune dead hubs from using up resources

		$r = q("update hubloc set hubloc_connected = '%s' where hubloc_id = %d and hubloc_sitekey = '%s' ",
			dbesc(datetime_convert()),
			intval($hub['hubloc_id']),
			dbesc($sitekey)
		);

		// a dead hub came back to life - reset any tombstones we might have

		if ($hub['hubloc_status'] & HUBLOC_OFFLINE) {
			q("update hubloc set hubloc_status = (hubloc_status & ~%d) where hubloc_id = %d and hubloc_sitekey = '%s' ",
				intval(HUBLOC_OFFLINE),
				intval($hub['hubloc_id']),
				dbesc($sitekey)		
			);
			if ($r[0]['hubloc_flags'] & HUBLOC_FLAGS_ORPHANCHECK) {
				q("update hubloc set hubloc_flags = (hubloc_flags & ~%d) where hubloc_id = %d and hubloc_sitekey = '%s' ",
					intval(HUBLOC_FLAGS_ORPHANCHECK),
					intval($hub['hubloc_id']),
					dbesc($sitekey)
				);
			}

			q("update xchan set xchan_flags = (xchan_flags & ~%d) where (xchan_flags & %d)>0 and xchan_hash = '%s'",
				intval(XCHAN_FLAGS_ORPHAN),
				intval(XCHAN_FLAGS_ORPHAN),
				dbesc($hub['hubloc_hash'])
			);
		}

		$connecting_url = $hub['hubloc_url'];
	}

	/** @TODO check which hub is primary and take action if mismatched */

	if (array_key_exists('recipients', $data))
		$recipients = $data['recipients'];


	if ($msgtype === 'auth_check') {

		/*
		 * Requestor visits /magic/?dest=somewhere on their own site with a browser
		 * magic redirects them to $destsite/post [with auth args....]
		 * $destsite sends an auth_check packet to originator site
		 * The auth_check packet is handled here by the originator's site 
		 * - the browser session is still waiting
		 * inside $destsite/post for everything to verify
		 * If everything checks out we'll return a token to $destsite
		 * and then $destsite will verify the token, authenticate the browser
		 * session and then redirect to the original destination.
		 * If authentication fails, the redirection to the original destination
		 * will still take place but without authentication.
		 */
		logger('mod_zot: auth_check', LOGGER_DEBUG);

		if (! $encrypted_packet) {
			logger('mod_zot: auth_check packet was not encrypted.');
			$ret['message'] .= 'no packet encryption' . EOL;
			json_return_and_die($ret);
		}

		$arr = $data['sender'];
		$sender_hash = make_xchan_hash($arr['guid'],$arr['guid_sig']);

		// garbage collect any old unused notifications

		// This was and should be 10 minutes but my hosting provider has time lag between the DB and 
		// the web server. We should probably convert this to webserver time rather than DB time so 
		// that the different clocks won't affect it and allow us to keep the time short. 

		q("delete from verify where type = 'auth' and created < %s - INTERVAL %s",
			db_utcnow(), db_quoteinterval('30 MINUTE')
		);

		$y = q("select xchan_pubkey from xchan where xchan_hash = '%s' limit 1",
			dbesc($sender_hash)
		);

		// We created a unique hash in mod/magic.php when we invoked remote auth, and stored it in
		// the verify table. It is now coming back to us as 'secret' and is signed by a channel at the other end.
		// First verify their signature. We will have obtained a zot-info packet from them as part of the sender
		// verification. 

		if ((! $y) || (! rsa_verify($data['secret'], base64url_decode($data['secret_sig']),$y[0]['xchan_pubkey']))) {
			logger('mod_zot: auth_check: sender not found or secret_sig invalid.');
			$ret['message'] .= 'sender not found or sig invalid ' . print_r($y,true) . EOL;
			json_return_and_die($ret);
		}

		// There should be exactly one recipient, the original auth requestor

		$ret['message'] .= 'recipients ' . print_r($recipients,true) . EOL;

		if ($data['recipients']) {

			$arr = $data['recipients'][0];
			$recip_hash = make_xchan_hash($arr['guid'], $arr['guid_sig']);
			$c = q("select channel_id, channel_account_id, channel_prvkey from channel where channel_hash = '%s' limit 1",
				dbesc($recip_hash)
			);
			if (! $c) {
				logger('mod_zot: auth_check: recipient channel not found.');
				$ret['message'] .= 'recipient not found.' . EOL;
				json_return_and_die($ret);
			}

			$confirm = base64url_encode(rsa_sign($data['secret'] . $recip_hash,$c[0]['channel_prvkey']));

			// This additionally checks for forged sites since we already stored the expected result in meta
			// and we've already verified that this is them via zot_gethub() and that their key signed our token

			$z = q("select id from verify where channel = %d and type = 'auth' and token = '%s' and meta = '%s' limit 1",
				intval($c[0]['channel_id']),
				dbesc($data['secret']),
				dbesc($data['sender']['url'])
			);
			if (! $z) {
				logger('mod_zot: auth_check: verification key not found.');
				$ret['message'] .= 'verification key not found' . EOL;
				json_return_and_die($ret);
			}
			$r = q("delete from verify where id = %d",
				intval($z[0]['id'])
			);

			$u = q("select account_service_class from account where account_id = %d limit 1",
				intval($c[0]['channel_account_id'])
			);

			logger('mod_zot: auth_check: success', LOGGER_DEBUG);
			$ret['success'] = true;
			$ret['confirm'] = $confirm;
			if ($u && $u[0]['account_service_class'])
				$ret['service_class'] = $u[0]['account_service_class'];

			// Set "do not track" flag if this site or this channel's profile is restricted
			// in some way

			if (intval(get_config('system','block_public')))
				$ret['DNT'] = true;
			if (! perm_is_allowed($c[0]['channel_id'],'','view_profile'))
				$ret['DNT'] = true;
			if (get_pconfig($c[0]['channel_id'],'system','do_not_track'))
				$ret['DNT'] = true;
			if (get_pconfig($c[0]['channel_id'],'system','hide_online_status'))
				$ret['DNT'] = true;

			json_return_and_die($ret);
		}
		json_return_and_die($ret);
	}

	if ($msgtype === 'request') {
		// request a particular post/conversation by message_id
		$x = zot_process_message_request($data);
		json_return_and_die($x);		
	}

	if ($msgtype === 'purge') {
		if ($recipients) {
			// basically this means "unfriend"
			foreach ($recipients as $recip) {
				$r = q("select channel.*,xchan.* from channel 
					left join xchan on channel_hash = xchan_hash
					where channel_guid = '%s' and channel_guid_sig = '%s' limit 1",
					dbesc($recip['guid']),
					dbesc($recip['guid_sig'])
				);
				if ($r) {
					$r = q("select abook_id from abook where uid = %d and abook_xchan = '%s' limit 1",
						intval($r[0]['channel_id']),
						dbesc(make_xchan_hash($sender['guid'],$sender['guid_sig']))
					);
					if ($r) {
						contact_remove($r[0]['channel_id'],$r[0]['abook_id']);
					}
				}
			}
		} else {
			// Unfriend everybody - basically this means the channel has committed suicide
			$arr = $data['sender'];
			$sender_hash = make_xchan_hash($arr['guid'],$arr['guid_sig']);

			require_once('include/Contact.php');
			remove_all_xchan_resources($sender_hash);	

			$ret['success'] = true;
			json_return_and_die($ret);
		}
	}

	if (($msgtype === 'refresh') || ($msgtype === 'force_refresh')) {

		// remote channel info (such as permissions or photo or something)
		// has been updated. Grab a fresh copy and sync it.
		// The difference between refresh and force_refresh is that 
		// force_refresh unconditionally creates a directory update record,
		// even if no changes were detected upon processing.

		if ($recipients) {

			// This would be a permissions update, typically for one connection

			foreach ($recipients as $recip) {
				$r = q("select channel.*,xchan.* from channel 
					left join xchan on channel_hash = xchan_hash
					where channel_guid = '%s' and channel_guid_sig = '%s' limit 1",
					dbesc($recip['guid']),
					dbesc($recip['guid_sig'])
				);

				$x = zot_refresh(array(
						'xchan_guid'     => $sender['guid'], 
						'xchan_guid_sig' => $sender['guid_sig'],
						'hubloc_url'     => $sender['url']
				), $r[0], (($msgtype === 'force_refresh') ? true : false));
			}
		} else {

			// system wide refresh

			$x = zot_refresh(array(
				'xchan_guid'     => $sender['guid'], 
				'xchan_guid_sig' => $sender['guid_sig'],
				'hubloc_url'     => $sender['url']
			), null, (($msgtype === 'force_refresh') ? true : false));
		}
		$ret['success'] = true;
		json_return_and_die($ret);
	}

	if ($msgtype === 'notify') {

		logger('notify received from ' . $connecting_url);


		$async = get_config('system','queued_fetch');

		if ($async) {
			// add to receive queue
			// qreceive_add($data);
		} else {
			$x = zot_fetch($data);
			$ret['delivery_report'] = $x;
		}

		$ret['success'] = true;
		json_return_and_die($ret);
	}

	// catchall
	json_return_and_die($ret);
}