[b]How to install the $Projectname on a Raspberry Pi[/b] You just bought a Raspberry Pi and want to run the RED Matrix with your own domain name? Then this page is for you! You will: [list=1] [*] Install Raspberry OS (Debian Linux) on a Raspberry [*] Install Apache Web Server, PHP, MaySQL, phpMyAdmin [*] Register a free domain (dynamic DNS) and use it for your hub [*] Install $Projectname [*] Keep your Raspberry Pi and $Projectname up-to-date [*] TODO Setting up SSL [*] TODO Running with SSL [*] TODO Make the webserver less vulnarable to attacks [/list] [size=large]1. Install Raspberry OS (Debian Linux)[/size] instructions under [url=http://www.raspberrypi.org/downloads]http://www.raspberrypi.org/downloads[/url] This page links to the quick start containing detailed instruction. [b]Format SD card[/b] using the program gparted under Linux Mint 15 format as FAT32 [b]Download NOOBS (offline and network install)[/b] [url=http://downloads.raspberrypi.org/noobs]http://downloads.raspberrypi.org/noobs[/url] unzip copy unzipped files to SD card [b]Install Raspbian as OS on the Rasperry Pi[/b] connect with keyboard via USB connect with monitor via HDMI Insert SD card into Rasperry Pi Connect with power supply to switch on the Rasperry choose Raspbian as OS (> installs Raspbian....) wait for the coniguration program raspi-config (you can later start it by sudo raspi-config) [b]Configure Raspbian[/b] in raspi-config > advanced > choose to use ssh (!! You need this to connect to administrate your Pi from your PC !!) in raspi-config > change the password (of default user "pi" from "raspberry" to your password) in raspi-config (optional) > Internationalisation options > Change Locale > to de_DE.utf-8 utf-8 (for example) in raspi-config (optional) > Internationalisation options > Change Timezoe > set your timezone in raspi-config (optional) > Overlock > medium (Source [url=http://www.manfred-steger.de/tuts/20-der-eigene-webserver-mit-dem-raspberry-pi#]http://www.manfred-steger.de/tuts/20-der-eigene-webserver-mit-dem-raspberry-pi#[/url]) [b]More[/b] [code]sudo reboot[/code] Now its time to connect the Pi to the network. [ul] [*] pull out keyboard [*] pull out monitor [*] you even can pull out the power supply (USB) [*] plug-in the network cable to the router [*] plug-in the power supply again [*] wait for a minute or to give the Pi time to boot and start ssh... [/ul] On your PC connect to the Pi to administrate (here update it). Open the console on the PC (Window: Start > cmd, Linux: Shell) Hint: use the router admin tool to find out the IP of your PI[code]ssh pi@192.168.178.37 sudo apt-get update sudo apt-get dist-upgrade[/code] (Source [url=http://www.manfred-steger.de/tuts/20-der-eigene-webserver-mit-dem-raspberry-pi#]http://www.manfred-steger.de/tuts/20-der-eigene-webserver-mit-dem-raspberry-pi#[/url]) [size=large]2. Install Apache Web Server, PHP, MaySQL, phpMyAdmin[/size] [b]Install Apache Webserver[/b] [code]sudo bash sudo groupadd www-data[/code] might exist already [code]sudo usermod -a -G www-data www-data sudo apt-get update sudo reboot[/code] wait... reconnect via ssh, example: [code]ssh pi@192.168.178.37 sudo apt-get install apache2 apache2-doc apache2-utils[/code] Open webbrowser on PC and check [url=http://192.168.178.37]http://192.168.178.37[/url] Should show you a page like "It works" (Source [url=http://www.manfred-steger.de/tuts/20-der-eigene-webserver-mit-dem-raspberry-pi#]http://www.manfred-steger.de/tuts/20-der-eigene-webserver-mit-dem-raspberry-pi#[/url]) [b]Install PHP, MaySQL, phpMyAdmin[/b] [code]sudo bash apt-get install libapache2-mod-php5 php5 php-pear php5-xcache php5-curl apt-get install php5-mysql apt-get install mysql-server mysql-client[/code] enter and note the mysql passwort [code]apt-get install phpmyadmin[/code] Configuring phpmyadmin - Select apache2 - Configure database for phpmyadmin with dbconfig-common?: Choose Yes (Source [url=http://www.manfred-steger.de/tuts/20-der-eigene-webserver-mit-dem-raspberry-pi#]http://www.manfred-steger.de/tuts/20-der-eigene-webserver-mit-dem-raspberry-pi#[/url]) [b]Test installation[/b] [code]cd /var/www[/code] create a php file to test the php installation[code]sudo nano phpinfo.php[/code] Insert into the file:[code] <?php phpinfo(); ?> [/code] (save CTRL+0, ENTER, CTRL+X) open webbrowser on PC and try [url=http://192.168.178.37/phpinfo.php]http://192.168.178.37/phpinfo.php[/url] (page shows infos on php) connect phpMyAdmin with MySQL database [code]nano /etc/apache2/apache2.conf[/code] - CTRL+V... to the end of the file - Insert at the end of the file: (save CTRL+0, ENTER, CTRL+X)[code]Include /etc/phpmyadmin/apache.conf[/code] restart apache[code]/etc/init.d/apache2 restart sudo apt-get update sudo apt-get upgrade sudo reboot[/code] (Source [url=http://www.manfred-steger.de/tuts/20-der-eigene-webserver-mit-dem-raspberry-pi#]http://www.manfred-steger.de/tuts/20-der-eigene-webserver-mit-dem-raspberry-pi#[/url]) [b]phpMyAdmin[/b] open webbrowser on PC and try #^[url=http://192.168.178.37/phpmyadmin]http://192.168.178.37/phpmyadmin[/url] (Source [url=http://www.manfred-steger.de/tuts/20-der-eigene-webserver-mit-dem-raspberry-pi#]http://www.manfred-steger.de/tuts/20-der-eigene-webserver-mit-dem-raspberry-pi#[/url]) [b]Create an empty database... that is later used by RED[/b] open webbrowser on PC and try #^[url=http://192.168.178.37/phpmyadmin]http://192.168.178.37/phpmyadmin[/url] Create an empty database Note the access details (hostname, username, password, database name). [size=large]3. Selfhost[/size] (Source: #^[url=http://www.techjawab.com/2013/06/setup-dynamic-dns-dyndns-for-free-on.html]http://www.techjawab.com/2013/06/setup-dynamic-dns-dyndns-for-free-on.html[/url]) [url=http://freedns.afraid.org/signup/]http://freedns.afraid.org/signup/[/url] [b]Step 1[/b] Register for a Free domain at #^[url=http://freedns.afraid.org/signup/]http://freedns.afraid.org/signup/[/url] (We will take techhome.homenet.org in this guide) [b]Step 2[/b] Logon to FreeDNS (where you just registered) and goto #^[url=http://freedns.afraid.org/dynamic/]http://freedns.afraid.org/dynamic/[/url] Right click on "Direct Link" and copy the URL and paste it somewhere. You should notice a large and unique alpha-numeric key in the URL, make a note of it as shown below: [code]http://freedns.afraid.org/dynamic/update.php?alphanumeric-key[/code] [b]Step 3[/b] Install inadyn using the following command:[code]sudo apt-get install inadyn[/code] [b]Step 4[/b] Configure inadyn using the below steps:[code]sudo nano /etc/inadyn.conf[/code] And add the following contains in it replacing the actual values: [code] --username [color=red]techhome[/color] --password [color=red]mypassword[/color] --update_period 3600 --forced_update_period 14400 --alias [color=red]techhome.homenet.org</b>,[color=red]alphanumeric key[/color] --background --dyndns_system default@freedns.afraid.org --syslog [/code] [b]Step 5[/b] Now, we need to ensure that the DNS updater (Inadyn) runs automatically after every re-boot[code]export EDITOR=gedit && sudo crontab -e[/code] Add the following line:[code]@reboot /usr/sbin/inadyn[/code] [b]Step 6[/b] Reboot system and then run the following command to ensure inadyn is running:[code] sudo reboot ps -A | grep inadyn [/code] Now your host is ready and up for accessing from internet... You can trying ssh-ing from another computer over the internet [code]ssh username@techhome.homenet.org[/code] Or, if any web server is running, then simply browse to #^[url=http://techhome.homenet.org]http://techhome.homenet.org[/url] Or, you can just ping it to test ping techhome.homenet.org To check the logs you can use this: [code]more /var/log/messages |grep INADYN[/code] [size=large]4. Install $Projectname[/size] (Source: [zrl=[baseurl]/help/Install][baseurl]/help/Install[/zrl]) Linux Appache document root is /var/www/ Two files exist there (created by the steps above): index.html, phpinfo.php [b]Install $Projectname and its Addons[/b] Cleanup: Remove the directory www/ (Git will not create files and folders in directories that are not empty.) Make sure you are in directory var[code]pi@pi /var $ cd /var[/code] Remove directory[code]pi@pi /var $ sudo rm -rf www/[/code] Download the sources of $Projectname from GIT [code]pi@pi /var $ sudo git clone https://github.com/redmatrix/redmatrix.git www[/code] Download the sources of the addons from GIT [code]pi@pi /var/www $ sudo git clone https://github.com/redmatrix/redmatrix-addons.git addon[/code] Make user www-data the owner of the whole web directory (including subdirectories and files) (TODO: This step has to be proofed by the next installation.) [code]pi@pi /var $ chown -R www-data:www-data /var/www/[/code] Check if you can update the sources from git[code] pi@pi /var $ cd www pi@pi /var/www $ git pull [/code] Check if you can update the addons [code]pi@pi /var/www $ cd addon/ pi@pi /var/www/addon $ sudo git pull[/code] Make sure folder store/[data]/smarty3 exists and is writable by the webserver [code]pi@pi /var/www $ sudo chmod ou+w "store/\[data\]/smarty3"[/code] Create .htconfig.php and is writable by the webserver [code]pi@pi /var/www $ sudo touch .htconfig.php pi@pi /var/www $ sudo chmod ou+w .htconfig.php[/code] [b]First start and initial configuration of your RED Matrix hub[/b] In browser open #^[zrl=http://einervonvielen.mooo.com/]http://einervonvielen.mooo.com/[/zrl] (Replace einervonvielen.mooo.com by your domain, see chapter selfhost. Be patient. It takes time.) (#^[zrl=http://einervonvielen.mooo.com/index.php?q=setup]http://einervonvielen.mooo.com/index.php?q=setup[/zrl]) There might be errors like the following. Error: libCURL PHP module required but not installed. Solution: apt-get install php5-curl Error: Apache webserver mod-rewrite module is required but not installed. Solution (Source: [url=http://xmodulo.com/2013/01/how-to-enable-mod_rewrite-in-apache2-on-debian-ubuntu.html]http://xmodulo.com/2013/01/how-to-enable-mod_rewrite-in-apache2-on-debian-ubuntu.html[/url]) The default installation of Apache2 comes with mod_rewrite installed. To check whether this is the case, verify the existence of /etc/apache2/mods-available/rewrite.load - pi@pi /var/www $ nano /etc/apache2/mods-available/rewrite.load (You should find the contendt: LoadModule rewrite_module /usr/lib/apache2/modules/mod_rewrite.so) To enable and load mod_rewrite, do the rest of steps. Create a symbolic link in /etc/apache2/mods-enabled - pi@pi /var/www $ sudo a2enmod rewrite Then open up the following file, and replace every occurrence of "AllowOverride None" with "AllowOverride all". - pi@pi /var/www $ sudo nano /etc/apache2/sites-available/default Finally, restart Apache2. - pi@pi /var/www $ sudo service apache2 restart Error store is writable (not checked) Solution: (TODO: Make writeable to group www-data only?) pi@pi /var/www $ sudo mkdir store pi@pi /var/www $ chown -R www-data:www-data /var/www/red/ pi@pi /var/www $ sudo chmod ou+w view [b]More[/b] Set up a cron job to run the poller once every 15 minutes in order to perform background processing. - pi@pi /var/www $ which php Make sure you are in the document root directory of the webserver - pi@pi /var/www $ cd /var/www/ Try to execute the poller in order to make sure it works - pi@pi /var/www $ /usr/bin/php include/poller.php Create the cronjob - pi@pi /var/www $ crontab -e Enter - */15 * * * * cd /var/www/; /usr/bin/php include/poller.php - Save and exit. Prevent search engines from indexing your search pages. Why? This can cause heavy resource use. [code] php util/config system block_public_search 1 [/code] [size=large]5. Keep your Raspberry Pi and your $Projectname up-to-date[/size] Git update every day at 4 am and addons at 5 am every day Try if the command is working - pi@pi /var/www $ sudo git pull Create the cronjob - pi@pi /var/www $ crontab -e Enter the following to update at 4:01 am every day - 01 04 * * * cd /var/www/; sudo git pull Enter the following to update the addons at 5:01 am every day - 01 05 * * * cd /var/www/addon/; sudo git pull Enter the following to update the Raspberry Pi (Raspbian OS = Debian) at 6:01 am every day - 01 06 * * * sudo aptitude -y update && sudo aptitude -y safe-upgrade Save and exit. [size=large]6. Running with SSL[/size] Follow the instructions here: [url=https://github.com/friendica/friendica/wiki/Running-Friendica-with-SSL]https://github.com/friendica/friendica/wiki/Running-Friendica-with-SSL[/url] #include doc/macros/main_footer.bb;