From b35122f7a6ad42756c35bb60ba1f06c3dcd45c77 Mon Sep 17 00:00:00 2001 From: friendica Date: Mon, 21 Oct 2013 15:46:31 -0700 Subject: add sabre (1.8.x) via composer in the !@#$ place it wants to be --- vendor/sabre/dav/docs/rfc2617.txt | 1907 +++++++++++++++++++++++++++++++++++++ 1 file changed, 1907 insertions(+) create mode 100644 vendor/sabre/dav/docs/rfc2617.txt (limited to 'vendor/sabre/dav/docs/rfc2617.txt') diff --git a/vendor/sabre/dav/docs/rfc2617.txt b/vendor/sabre/dav/docs/rfc2617.txt new file mode 100644 index 000000000..771aa924a --- /dev/null +++ b/vendor/sabre/dav/docs/rfc2617.txt @@ -0,0 +1,1907 @@ + + + + + + +Network Working Group J. Franks +Request for Comments: 2617 Northwestern University +Obsoletes: 2069 P. Hallam-Baker +Category: Standards Track Verisign, Inc. + J. Hostetler + AbiSource, Inc. + S. Lawrence + Agranat Systems, Inc. + P. Leach + Microsoft Corporation + A. Luotonen + Netscape Communications Corporation + L. Stewart + Open Market, Inc. + June 1999 + + + HTTP Authentication: Basic and Digest Access Authentication + +Status of this Memo + + This document specifies an Internet standards track protocol for the + Internet community, and requests discussion and suggestions for + improvements. Please refer to the current edition of the "Internet + Official Protocol Standards" (STD 1) for the standardization state + and status of this protocol. Distribution of this memo is unlimited. + +Copyright Notice + + Copyright (C) The Internet Society (1999). All Rights Reserved. + +Abstract + + "HTTP/1.0", includes the specification for a Basic Access + Authentication scheme. This scheme is not considered to be a secure + method of user authentication (unless used in conjunction with some + external secure system such as SSL [5]), as the user name and + password are passed over the network as cleartext. + + This document also provides the specification for HTTP's + authentication framework, the original Basic authentication scheme + and a scheme based on cryptographic hashes, referred to as "Digest + Access Authentication". It is therefore also intended to serve as a + replacement for RFC 2069 [6]. Some optional elements specified by + RFC 2069 have been removed from this specification due to problems + found since its publication; other new elements have been added for + compatibility, those new elements have been made optional, but are + strongly recommended. + + + +Franks, et al. Standards Track [Page 1] + +RFC 2617 HTTP Authentication June 1999 + + + Like Basic, Digest access authentication verifies that both parties + to a communication know a shared secret (a password); unlike Basic, + this verification can be done without sending the password in the + clear, which is Basic's biggest weakness. As with most other + authentication protocols, the greatest sources of risks are usually + found not in the core protocol itself but in policies and procedures + surrounding its use. + +Table of Contents + + 1 Access Authentication................................ 3 + 1.1 Reliance on the HTTP/1.1 Specification............ 3 + 1.2 Access Authentication Framework................... 3 + 2 Basic Authentication Scheme.......................... 5 + 3 Digest Access Authentication Scheme.................. 6 + 3.1 Introduction...................................... 6 + 3.1.1 Purpose......................................... 6 + 3.1.2 Overall Operation............................... 6 + 3.1.3 Representation of digest values................. 7 + 3.1.4 Limitations..................................... 7 + 3.2 Specification of Digest Headers................... 7 + 3.2.1 The WWW-Authenticate Response Header............ 8 + 3.2.2 The Authorization Request Header................ 11 + 3.2.3 The Authentication-Info Header.................. 15 + 3.3 Digest Operation.................................. 17 + 3.4 Security Protocol Negotiation..................... 18 + 3.5 Example........................................... 18 + 3.6 Proxy-Authentication and Proxy-Authorization...... 19 + 4 Security Considerations.............................. 19 + 4.1 Authentication of Clients using Basic + Authentication.................................... 19 + 4.2 Authentication of Clients using Digest + Authentication.................................... 20 + 4.3 Limited Use Nonce Values.......................... 21 + 4.4 Comparison of Digest with Basic Authentication.... 22 + 4.5 Replay Attacks.................................... 22 + 4.6 Weakness Created by Multiple Authentication + Schemes........................................... 23 + 4.7 Online dictionary attacks......................... 23 + 4.8 Man in the Middle................................. 24 + 4.9 Chosen plaintext attacks.......................... 24 + 4.10 Precomputed dictionary attacks.................... 25 + 4.11 Batch brute force attacks......................... 25 + 4.12 Spoofing by Counterfeit Servers................... 25 + 4.13 Storing passwords................................. 26 + 4.14 Summary........................................... 26 + 5 Sample implementation................................ 27 + 6 Acknowledgments...................................... 31 + + + +Franks, et al. Standards Track [Page 2] + +RFC 2617 HTTP Authentication June 1999 + + + 7 References........................................... 31 + 8 Authors' Addresses................................... 32 + 9 Full Copyright Statement............................. 34 + +1 Access Authentication + +1.1 Reliance on the HTTP/1.1 Specification + + This specification is a companion to the HTTP/1.1 specification [2]. + It uses the augmented BNF section 2.1 of that document, and relies on + both the non-terminals defined in that document and other aspects of + the HTTP/1.1 specification. + +1.2 Access Authentication Framework + + HTTP provides a simple challenge-response authentication mechanism + that MAY be used by a server to challenge a client request and by a + client to provide authentication information. It uses an extensible, + case-insensitive token to identify the authentication scheme, + followed by a comma-separated list of attribute-value pairs which + carry the parameters necessary for achieving authentication via that + scheme. + + auth-scheme = token + auth-param = token "=" ( token | quoted-string ) + + The 401 (Unauthorized) response message is used by an origin server + to challenge the authorization of a user agent. This response MUST + include a WWW-Authenticate header field containing at least one + challenge applicable to the requested resource. The 407 (Proxy + Authentication Required) response message is used by a proxy to + challenge the authorization of a client and MUST include a Proxy- + Authenticate header field containing at least one challenge + applicable to the proxy for the requested resource. + + challenge = auth-scheme 1*SP 1#auth-param + + Note: User agents will need to take special care in parsing the WWW- + Authenticate or Proxy-Authenticate header field value if it contains + more than one challenge, or if more than one WWW-Authenticate header + field is provided, since the contents of a challenge may itself + contain a comma-separated list of authentication parameters. + + The authentication parameter realm is defined for all authentication + schemes: + + realm = "realm" "=" realm-value + realm-value = quoted-string + + + +Franks, et al. Standards Track [Page 3] + +RFC 2617 HTTP Authentication June 1999 + + + The realm directive (case-insensitive) is required for all + authentication schemes that issue a challenge. The realm value + (case-sensitive), in combination with the canonical root URL (the + absoluteURI for the server whose abs_path is empty; see section 5.1.2 + of [2]) of the server being accessed, defines the protection space. + These realms allow the protected resources on a server to be + partitioned into a set of protection spaces, each with its own + authentication scheme and/or authorization database. The realm value + is a string, generally assigned by the origin server, which may have + additional semantics specific to the authentication scheme. Note that + there may be multiple challenges with the same auth-scheme but + different realms. + + A user agent that wishes to authenticate itself with an origin + server--usually, but not necessarily, after receiving a 401 + (Unauthorized)--MAY do so by including an Authorization header field + with the request. A client that wishes to authenticate itself with a + proxy--usually, but not necessarily, after receiving a 407 (Proxy + Authentication Required)--MAY do so by including a Proxy- + Authorization header field with the request. Both the Authorization + field value and the Proxy-Authorization field value consist of + credentials containing the authentication information of the client + for the realm of the resource being requested. The user agent MUST + choose to use one of the challenges with the strongest auth-scheme it + understands and request credentials from the user based upon that + challenge. + + credentials = auth-scheme #auth-param + + Note that many browsers will only recognize Basic and will require + that it be the first auth-scheme presented. Servers should only + include Basic if it is minimally acceptable. + + The protection space determines the domain over which credentials can + be automatically applied. If a prior request has been authorized, the + same credentials MAY be reused for all other requests within that + protection space for a period of time determined by the + authentication scheme, parameters, and/or user preference. Unless + otherwise defined by the authentication scheme, a single protection + space cannot extend outside the scope of its server. + + If the origin server does not wish to accept the credentials sent + with a request, it SHOULD return a 401 (Unauthorized) response. The + response MUST include a WWW-Authenticate header field containing at + least one (possibly new) challenge applicable to the requested + resource. If a proxy does not accept the credentials sent with a + request, it SHOULD return a 407 (Proxy Authentication Required). The + response MUST include a Proxy-Authenticate header field containing a + + + +Franks, et al. Standards Track [Page 4] + +RFC 2617 HTTP Authentication June 1999 + + + (possibly new) challenge applicable to the proxy for the requested + resource. + + The HTTP protocol does not restrict applications to this simple + challenge-response mechanism for access authentication. Additional + mechanisms MAY be used, such as encryption at the transport level or + via message encapsulation, and with additional header fields + specifying authentication information. However, these additional + mechanisms are not defined by this specification. + + Proxies MUST be completely transparent regarding user agent + authentication by origin servers. That is, they must forward the + WWW-Authenticate and Authorization headers untouched, and follow the + rules found in section 14.8 of [2]. Both the Proxy-Authenticate and + the Proxy-Authorization header fields are hop-by-hop headers (see + section 13.5.1 of [2]). + +2 Basic Authentication Scheme + + The "basic" authentication scheme is based on the model that the + client must authenticate itself with a user-ID and a password for + each realm. The realm value should be considered an opaque string + which can only be compared for equality with other realms on that + server. The server will service the request only if it can validate + the user-ID and password for the protection space of the Request-URI. + There are no optional authentication parameters. + + For Basic, the framework above is utilized as follows: + + challenge = "Basic" realm + credentials = "Basic" basic-credentials + + Upon receipt of an unauthorized request for a URI within the + protection space, the origin server MAY respond with a challenge like + the following: + + WWW-Authenticate: Basic realm="WallyWorld" + + where "WallyWorld" is the string assigned by the server to identify + the protection space of the Request-URI. A proxy may respond with the + same challenge using the Proxy-Authenticate header field. + + To receive authorization, the client sends the userid and password, + separated by a single colon (":") character, within a base64 [7] + encoded string in the credentials. + + basic-credentials = base64-user-pass + base64-user-pass = + user-pass = userid ":" password + userid = * + password = *TEXT + + Userids might be case sensitive. + + If the user agent wishes to send the userid "Aladdin" and password + "open sesame", it would use the following header field: + + Authorization: Basic QWxhZGRpbjpvcGVuIHNlc2FtZQ== + + A client SHOULD assume that all paths at or deeper than the depth of + the last symbolic element in the path field of the Request-URI also + are within the protection space specified by the Basic realm value of + the current challenge. A client MAY preemptively send the + corresponding Authorization header with requests for resources in + that space without receipt of another challenge from the server. + Similarly, when a client sends a request to a proxy, it may reuse a + userid and password in the Proxy-Authorization header field without + receiving another challenge from the proxy server. See section 4 for + security considerations associated with Basic authentication. + +3 Digest Access Authentication Scheme + +3.1 Introduction + +3.1.1 Purpose + + The protocol referred to as "HTTP/1.0" includes the specification for + a Basic Access Authentication scheme[1]. That scheme is not + considered to be a secure method of user authentication, as the user + name and password are passed over the network in an unencrypted form. + This section provides the specification for a scheme that does not + send the password in cleartext, referred to as "Digest Access + Authentication". + + The Digest Access Authentication scheme is not intended to be a + complete answer to the need for security in the World Wide Web. This + scheme provides no encryption of message content. The intent is + simply to create an access authentication method that avoids the most + serious flaws of Basic authentication. + +3.1.2 Overall Operation + + Like Basic Access Authentication, the Digest scheme is based on a + simple challenge-response paradigm. The Digest scheme challenges + using a nonce value. A valid response contains a checksum (by + + + +Franks, et al. Standards Track [Page 6] + +RFC 2617 HTTP Authentication June 1999 + + + default, the MD5 checksum) of the username, the password, the given + nonce value, the HTTP method, and the requested URI. In this way, the + password is never sent in the clear. Just as with the Basic scheme, + the username and password must be prearranged in some fashion not + addressed by this document. + +3.1.3 Representation of digest values + + An optional header allows the server to specify the algorithm used to + create the checksum or digest. By default the MD5 algorithm is used + and that is the only algorithm described in this document. + + For the purposes of this document, an MD5 digest of 128 bits is + represented as 32 ASCII printable characters. The bits in the 128 bit + digest are converted from most significant to least significant bit, + four bits at a time to their ASCII presentation as follows. Each four + bits is represented by its familiar hexadecimal notation from the + characters 0123456789abcdef. That is, binary 0000 gets represented by + the character '0', 0001, by '1', and so on up to the representation + of 1111 as 'f'. + +3.1.4 Limitations + + The Digest authentication scheme described in this document suffers + from many known limitations. It is intended as a replacement for + Basic authentication and nothing more. It is a password-based system + and (on the server side) suffers from all the same problems of any + password system. In particular, no provision is made in this protocol + for the initial secure arrangement between user and server to + establish the user's password. + + Users and implementors should be aware that this protocol is not as + secure as Kerberos, and not as secure as any client-side private-key + scheme. Nevertheless it is better than nothing, better than what is + commonly used with telnet and ftp, and better than Basic + authentication. + +3.2 Specification of Digest Headers + + The Digest Access Authentication scheme is conceptually similar to + the Basic scheme. The formats of the modified WWW-Authenticate header + line and the Authorization header line are specified below. In + addition, a new header, Authentication-Info, is specified. + + + + + + + + +Franks, et al. Standards Track [Page 7] + +RFC 2617 HTTP Authentication June 1999 + + +3.2.1 The WWW-Authenticate Response Header + + If a server receives a request for an access-protected object, and an + acceptable Authorization header is not sent, the server responds with + a "401 Unauthorized" status code, and a WWW-Authenticate header as + per the framework defined above, which for the digest scheme is + utilized as follows: + + challenge = "Digest" digest-challenge + + digest-challenge = 1#( realm | [ domain ] | nonce | + [ opaque ] |[ stale ] | [ algorithm ] | + [ qop-options ] | [auth-param] ) + + + domain = "domain" "=" <"> URI ( 1*SP URI ) <"> + URI = absoluteURI | abs_path + nonce = "nonce" "=" nonce-value + nonce-value = quoted-string + opaque = "opaque" "=" quoted-string + stale = "stale" "=" ( "true" | "false" ) + algorithm = "algorithm" "=" ( "MD5" | "MD5-sess" | + token ) + qop-options = "qop" "=" <"> 1#qop-value <"> + qop-value = "auth" | "auth-int" | token + + The meanings of the values of the directives used above are as + follows: + + realm + A string to be displayed to users so they know which username and + password to use. This string should contain at least the name of + the host performing the authentication and might additionally + indicate the collection of users who might have access. An example + might be "registered_users@gotham.news.com". + + domain + A quoted, space-separated list of URIs, as specified in RFC XURI + [7], that define the protection space. If a URI is an abs_path, it + is relative to the canonical root URL (see section 1.2 above) of + the server being accessed. An absoluteURI in this list may refer to + a different server than the one being accessed. The client can use + this list to determine the set of URIs for which the same + authentication information may be sent: any URI that has a URI in + this list as a prefix (after both have been made absolute) may be + assumed to be in the same protection space. If this directive is + omitted or its value is empty, the client should assume that the + protection space consists of all URIs on the responding server. + + + +Franks, et al. Standards Track [Page 8] + +RFC 2617 HTTP Authentication June 1999 + + + This directive is not meaningful in Proxy-Authenticate headers, for + which the protection space is always the entire proxy; if present + it should be ignored. + + nonce + A server-specified data string which should be uniquely generated + each time a 401 response is made. It is recommended that this + string be base64 or hexadecimal data. Specifically, since the + string is passed in the header lines as a quoted string, the + double-quote character is not allowed. + + The contents of the nonce are implementation dependent. The quality + of the implementation depends on a good choice. A nonce might, for + example, be constructed as the base 64 encoding of + + time-stamp H(time-stamp ":" ETag ":" private-key) + + where time-stamp is a server-generated time or other non-repeating + value, ETag is the value of the HTTP ETag header associated with + the requested entity, and private-key is data known only to the + server. With a nonce of this form a server would recalculate the + hash portion after receiving the client authentication header and + reject the request if it did not match the nonce from that header + or if the time-stamp value is not recent enough. In this way the + server can limit the time of the nonce's validity. The inclusion of + the ETag prevents a replay request for an updated version of the + resource. (Note: including the IP address of the client in the + nonce would appear to offer the server the ability to limit the + reuse of the nonce to the same client that originally got it. + However, that would break proxy farms, where requests from a single + user often go through different proxies in the farm. Also, IP + address spoofing is not that hard.) + + An implementation might choose not to accept a previously used + nonce or a previously used digest, in order to protect against a + replay attack. Or, an implementation might choose to use one-time + nonces or digests for POST or PUT requests and a time-stamp for GET + requests. For more details on the issues involved see section 4. + of this document. + + The nonce is opaque to the client. + + opaque + A string of data, specified by the server, which should be returned + by the client unchanged in the Authorization header of subsequent + requests with URIs in the same protection space. It is recommended + that this string be base64 or hexadecimal data. + + + + +Franks, et al. Standards Track [Page 9] + +RFC 2617 HTTP Authentication June 1999 + + + stale + A flag, indicating that the previous request from the client was + rejected because the nonce value was stale. If stale is TRUE + (case-insensitive), the client may wish to simply retry the request + with a new encrypted response, without reprompting the user for a + new username and password. The server should only set stale to TRUE + if it receives a request for which the nonce is invalid but with a + valid digest for that nonce (indicating that the client knows the + correct username/password). If stale is FALSE, or anything other + than TRUE, or the stale directive is not present, the username + and/or password are invalid, and new values must be obtained. + + algorithm + A string indicating a pair of algorithms used to produce the digest + and a checksum. If this is not present it is assumed to be "MD5". + If the algorithm is not understood, the challenge should be ignored + (and a different one used, if there is more than one). + + In this document the string obtained by applying the digest + algorithm to the data "data" with secret "secret" will be denoted + by KD(secret, data), and the string obtained by applying the + checksum algorithm to the data "data" will be denoted H(data). The + notation unq(X) means the value of the quoted-string X without the + surrounding quotes. + + For the "MD5" and "MD5-sess" algorithms + + H(data) = MD5(data) + + and + + KD(secret, data) = H(concat(secret, ":", data)) + + i.e., the digest is the MD5 of the secret concatenated with a colon + concatenated with the data. The "MD5-sess" algorithm is intended to + allow efficient 3rd party authentication servers; for the + difference in usage, see the description in section 3.2.2.2. + + qop-options + This directive is optional, but is made so only for backward + compatibility with RFC 2069 [6]; it SHOULD be used by all + implementations compliant with this version of the Digest scheme. + If present, it is a quoted string of one or more tokens indicating + the "quality of protection" values supported by the server. The + value "auth" indicates authentication; the value "auth-int" + indicates authentication with integrity protection; see the + + + + + +Franks, et al. Standards Track [Page 10] + +RFC 2617 HTTP Authentication June 1999 + + + descriptions below for calculating the response directive value for + the application of this choice. Unrecognized options MUST be + ignored. + + auth-param + This directive allows for future extensions. Any unrecognized + directive MUST be ignored. + +3.2.2 The Authorization Request Header + + The client is expected to retry the request, passing an Authorization + header line, which is defined according to the framework above, + utilized as follows. + + credentials = "Digest" digest-response + digest-response = 1#( username | realm | nonce | digest-uri + | response | [ algorithm ] | [cnonce] | + [opaque] | [message-qop] | + [nonce-count] | [auth-param] ) + + username = "username" "=" username-value + username-value = quoted-string + digest-uri = "uri" "=" digest-uri-value + digest-uri-value = request-uri ; As specified by HTTP/1.1 + message-qop = "qop" "=" qop-value + cnonce = "cnonce" "=" cnonce-value + cnonce-value = nonce-value + nonce-count = "nc" "=" nc-value + nc-value = 8LHEX + response = "response" "=" request-digest + request-digest = <"> 32LHEX <"> + LHEX = "0" | "1" | "2" | "3" | + "4" | "5" | "6" | "7" | + "8" | "9" | "a" | "b" | + "c" | "d" | "e" | "f" + + The values of the opaque and algorithm fields must be those supplied + in the WWW-Authenticate response header for the entity being + requested. + + response + A string of 32 hex digits computed as defined below, which proves + that the user knows a password + + username + The user's name in the specified realm. + + + + + +Franks, et al. Standards Track [Page 11] + +RFC 2617 HTTP Authentication June 1999 + + + digest-uri + The URI from Request-URI of the Request-Line; duplicated here + because proxies are allowed to change the Request-Line in transit. + + qop + Indicates what "quality of protection" the client has applied to + the message. If present, its value MUST be one of the alternatives + the server indicated it supports in the WWW-Authenticate header. + These values affect the computation of the request-digest. Note + that this is a single token, not a quoted list of alternatives as + in WWW- Authenticate. This directive is optional in order to + preserve backward compatibility with a minimal implementation of + RFC 2069 [6], but SHOULD be used if the server indicated that qop + is supported by providing a qop directive in the WWW-Authenticate + header field. + + cnonce + This MUST be specified if a qop directive is sent (see above), and + MUST NOT be specified if the server did not send a qop directive in + the WWW-Authenticate header field. The cnonce-value is an opaque + quoted string value provided by the client and used by both client + and server to avoid chosen plaintext attacks, to provide mutual + authentication, and to provide some message integrity protection. + See the descriptions below of the calculation of the response- + digest and request-digest values. + + nonce-count + This MUST be specified if a qop directive is sent (see above), and + MUST NOT be specified if the server did not send a qop directive in + the WWW-Authenticate header field. The nc-value is the hexadecimal + count of the number of requests (including the current request) + that the client has sent with the nonce value in this request. For + example, in the first request sent in response to a given nonce + value, the client sends "nc=00000001". The purpose of this + directive is to allow the server to detect request replays by + maintaining its own copy of this count - if the same nc-value is + seen twice, then the request is a replay. See the description + below of the construction of the request-digest value. + + auth-param + This directive allows for future extensions. Any unrecognized + directive MUST be ignored. + + If a directive or its value is improper, or required directives are + missing, the proper response is 400 Bad Request. If the request- + digest is invalid, then a login failure should be logged, since + repeated login failures from a single client may indicate an attacker + attempting to guess passwords. + + + +Franks, et al. Standards Track [Page 12] + +RFC 2617 HTTP Authentication June 1999 + + + The definition of request-digest above indicates the encoding for its + value. The following definitions show how the value is computed. + +3.2.2.1 Request-Digest + + If the "qop" value is "auth" or "auth-int": + + request-digest = <"> < KD ( H(A1), unq(nonce-value) + ":" nc-value + ":" unq(cnonce-value) + ":" unq(qop-value) + ":" H(A2) + ) <"> + + If the "qop" directive is not present (this construction is for + compatibility with RFC 2069): + + request-digest = + <"> < KD ( H(A1), unq(nonce-value) ":" H(A2) ) > + <"> + + See below for the definitions for A1 and A2. + +3.2.2.2 A1 + + If the "algorithm" directive's value is "MD5" or is unspecified, then + A1 is: + + A1 = unq(username-value) ":" unq(realm-value) ":" passwd + + where + + passwd = < user's password > + + If the "algorithm" directive's value is "MD5-sess", then A1 is + calculated only once - on the first request by the client following + receipt of a WWW-Authenticate challenge from the server. It uses the + server nonce from that challenge, and the first client nonce value to + construct A1 as follows: + + A1 = H( unq(username-value) ":" unq(realm-value) + ":" passwd ) + ":" unq(nonce-value) ":" unq(cnonce-value) + + This creates a 'session key' for the authentication of subsequent + requests and responses which is different for each "authentication + session", thus limiting the amount of material hashed with any one + key. (Note: see further discussion of the authentication session in + + + +Franks, et al. Standards Track [Page 13] + +RFC 2617 HTTP Authentication June 1999 + + + section 3.3.) Because the server need only use the hash of the user + credentials in order to create the A1 value, this construction could + be used in conjunction with a third party authentication service so + that the web server would not need the actual password value. The + specification of such a protocol is beyond the scope of this + specification. + +3.2.2.3 A2 + + If the "qop" directive's value is "auth" or is unspecified, then A2 + is: + + A2 = Method ":" digest-uri-value + + If the "qop" value is "auth-int", then A2 is: + + A2 = Method ":" digest-uri-value ":" H(entity-body) + +3.2.2.4 Directive values and quoted-string + + Note that the value of many of the directives, such as "username- + value", are defined as a "quoted-string". However, the "unq" notation + indicates that surrounding quotation marks are removed in forming the + string A1. Thus if the Authorization header includes the fields + + username="Mufasa", realm=myhost@testrealm.com + + and the user Mufasa has password "Circle Of Life" then H(A1) would be + H(Mufasa:myhost@testrealm.com:Circle Of Life) with no quotation marks + in the digested string. + + No white space is allowed in any of the strings to which the digest + function H() is applied unless that white space exists in the quoted + strings or entity body whose contents make up the string to be + digested. For example, the string A1 illustrated above must be + + Mufasa:myhost@testrealm.com:Circle Of Life + + with no white space on either side of the colons, but with the white + space between the words used in the password value. Likewise, the + other strings digested by H() must not have white space on either + side of the colons which delimit their fields unless that white space + was in the quoted strings or entity body being digested. + + Also note that if integrity protection is applied (qop=auth-int), the + H(entity-body) is the hash of the entity body, not the message body - + it is computed before any transfer encoding is applied by the sender + + + + +Franks, et al. Standards Track [Page 14] + +RFC 2617 HTTP Authentication June 1999 + + + and after it has been removed by the recipient. Note that this + includes multipart boundaries and embedded headers in each part of + any multipart content-type. + +3.2.2.5 Various considerations + + The "Method" value is the HTTP request method as specified in section + 5.1.1 of [2]. The "request-uri" value is the Request-URI from the + request line as specified in section 5.1.2 of [2]. This may be "*", + an "absoluteURL" or an "abs_path" as specified in section 5.1.2 of + [2], but it MUST agree with the Request-URI. In particular, it MUST + be an "absoluteURL" if the Request-URI is an "absoluteURL". The + "cnonce-value" is an optional client-chosen value whose purpose is + to foil chosen plaintext attacks. + + The authenticating server must assure that the resource designated by + the "uri" directive is the same as the resource specified in the + Request-Line; if they are not, the server SHOULD return a 400 Bad + Request error. (Since this may be a symptom of an attack, server + implementers may want to consider logging such errors.) The purpose + of duplicating information from the request URL in this field is to + deal with the possibility that an intermediate proxy may alter the + client's Request-Line. This altered (but presumably semantically + equivalent) request would not result in the same digest as that + calculated by the client. + + Implementers should be aware of how authenticated transactions + interact with shared caches. The HTTP/1.1 protocol specifies that + when a shared cache (see section 13.7 of [2]) has received a request + containing an Authorization header and a response from relaying that + request, it MUST NOT return that response as a reply to any other + request, unless one of two Cache-Control (see section 14.9 of [2]) + directives was present in the response. If the original response + included the "must-revalidate" Cache-Control directive, the cache MAY + use the entity of that response in replying to a subsequent request, + but MUST first revalidate it with the origin server, using the + request headers from the new request to allow the origin server to + authenticate the new request. Alternatively, if the original response + included the "public" Cache-Control directive, the response entity + MAY be returned in reply to any subsequent request. + +3.2.3 The Authentication-Info Header + + The Authentication-Info header is used by the server to communicate + some information regarding the successful authentication in the + response. + + + + + +Franks, et al. Standards Track [Page 15] + +RFC 2617 HTTP Authentication June 1999 + + + AuthenticationInfo = "Authentication-Info" ":" auth-info + auth-info = 1#(nextnonce | [ message-qop ] + | [ response-auth ] | [ cnonce ] + | [nonce-count] ) + nextnonce = "nextnonce" "=" nonce-value + response-auth = "rspauth" "=" response-digest + response-digest = <"> *LHEX <"> + + The value of the nextnonce directive is the nonce the server wishes + the client to use for a future authentication response. The server + may send the Authentication-Info header with a nextnonce field as a + means of implementing one-time or otherwise changing nonces. If the + nextnonce field is present the client SHOULD use it when constructing + the Authorization header for its next request. Failure of the client + to do so may result in a request to re-authenticate from the server + with the "stale=TRUE". + + Server implementations should carefully consider the performance + implications of the use of this mechanism; pipelined requests will + not be possible if every response includes a nextnonce directive + that must be used on the next request received by the server. + Consideration should be given to the performance vs. security + tradeoffs of allowing an old nonce value to be used for a limited + time to permit request pipelining. Use of the nonce-count can + retain most of the security advantages of a new server nonce + without the deleterious affects on pipelining. + + message-qop + Indicates the "quality of protection" options applied to the + response by the server. The value "auth" indicates authentication; + the value "auth-int" indicates authentication with integrity + protection. The server SHOULD use the same value for the message- + qop directive in the response as was sent by the client in the + corresponding request. + + The optional response digest in the "response-auth" directive + supports mutual authentication -- the server proves that it knows the + user's secret, and with qop=auth-int also provides limited integrity + protection of the response. The "response-digest" value is calculated + as for the "request-digest" in the Authorization header, except that + if "qop=auth" or is not specified in the Authorization header for the + request, A2 is + + A2 = ":" digest-uri-value + + and if "qop=auth-int", then A2 is + + A2 = ":" digest-uri-value ":" H(entity-body) + + + +Franks, et al. Standards Track [Page 16] + +RFC 2617 HTTP Authentication June 1999 + + + where "digest-uri-value" is the value of the "uri" directive on the + Authorization header in the request. The "cnonce-value" and "nc- + value" MUST be the ones for the client request to which this message + is the response. The "response-auth", "cnonce", and "nonce-count" + directives MUST BE present if "qop=auth" or "qop=auth-int" is + specified. + + The Authentication-Info header is allowed in the trailer of an HTTP + message transferred via chunked transfer-coding. + +3.3 Digest Operation + + Upon receiving the Authorization header, the server may check its + validity by looking up the password that corresponds to the submitted + username. Then, the server must perform the same digest operation + (e.g., MD5) performed by the client, and compare the result to the + given request-digest value. + + Note that the HTTP server does not actually need to know the user's + cleartext password. As long as H(A1) is available to the server, the + validity of an Authorization header may be verified. + + The client response to a WWW-Authenticate challenge for a protection + space starts an authentication session with that protection space. + The authentication session lasts until the client receives another + WWW-Authenticate challenge from any server in the protection space. A + client should remember the username, password, nonce, nonce count and + opaque values associated with an authentication session to use to + construct the Authorization header in future requests within that + protection space. The Authorization header may be included + preemptively; doing so improves server efficiency and avoids extra + round trips for authentication challenges. The server may choose to + accept the old Authorization header information, even though the + nonce value included might not be fresh. Alternatively, the server + may return a 401 response with a new nonce value, causing the client + to retry the request; by specifying stale=TRUE with this response, + the server tells the client to retry with the new nonce, but without + prompting for a new username and password. + + Because the client is required to return the value of the opaque + directive given to it by the server for the duration of a session, + the opaque data may be used to transport authentication session state + information. (Note that any such use can also be accomplished more + easily and safely by including the state in the nonce.) For example, + a server could be responsible for authenticating content that + actually sits on another server. It would achieve this by having the + first 401 response include a domain directive whose value includes a + URI on the second server, and an opaque directive whose value + + + +Franks, et al. Standards Track [Page 17] + +RFC 2617 HTTP Authentication June 1999 + + + contains the state information. The client will retry the request, at + which time the server might respond with a 301/302 redirection, + pointing to the URI on the second server. The client will follow the + redirection, and pass an Authorization header , including the + data. + + As with the basic scheme, proxies must be completely transparent in + the Digest access authentication scheme. That is, they must forward + the WWW-Authenticate, Authentication-Info and Authorization headers + untouched. If a proxy wants to authenticate a client before a request + is forwarded to the server, it can be done using the Proxy- + Authenticate and Proxy-Authorization headers described in section 3.6 + below. + +3.4 Security Protocol Negotiation + + It is useful for a server to be able to know which security schemes a + client is capable of handling. + + It is possible that a server may want to require Digest as its + authentication method, even if the server does not know that the + client supports it. A client is encouraged to fail gracefully if the + server specifies only authentication schemes it cannot handle. + +3.5 Example + + The following example assumes that an access-protected document is + being requested from the server via a GET request. The URI of the + document is "http://www.nowhere.org/dir/index.html". Both client and + server know that the username for this document is "Mufasa", and the + password is "Circle Of Life" (with one space between each of the + three words). + + The first time the client requests the document, no Authorization + header is sent, so the server responds with: + + HTTP/1.1 401 Unauthorized + WWW-Authenticate: Digest + realm="testrealm@host.com", + qop="auth,auth-int", + nonce="dcd98b7102dd2f0e8b11d0f600bfb0c093", + opaque="5ccc069c403ebaf9f0171e9517f40e41" + + The client may prompt the user for the username and password, after + which it will respond with a new request, including the following + Authorization header: + + + + + +Franks, et al. Standards Track [Page 18] + +RFC 2617 HTTP Authentication June 1999 + + + Authorization: Digest username="Mufasa", + realm="testrealm@host.com", + nonce="dcd98b7102dd2f0e8b11d0f600bfb0c093", + uri="/dir/index.html", + qop=auth, + nc=00000001, + cnonce="0a4f113b", + response="6629fae49393a05397450978507c4ef1", + opaque="5ccc069c403ebaf9f0171e9517f40e41" + +3.6 Proxy-Authentication and Proxy-Authorization + + The digest authentication scheme may also be used for authenticating + users to proxies, proxies to proxies, or proxies to origin servers by + use of the Proxy-Authenticate and Proxy-Authorization headers. These + headers are instances of the Proxy-Authenticate and Proxy- + Authorization headers specified in sections 10.33 and 10.34 of the + HTTP/1.1 specification [2] and their behavior is subject to + restrictions described there. The transactions for proxy + authentication are very similar to those already described. Upon + receiving a request which requires authentication, the proxy/server + must issue the "407 Proxy Authentication Required" response with a + "Proxy-Authenticate" header. The digest-challenge used in the + Proxy-Authenticate header is the same as that for the WWW- + Authenticate header as defined above in section 3.2.1. + + The client/proxy must then re-issue the request with a Proxy- + Authorization header, with directives as specified for the + Authorization header in section 3.2.2 above. + + On subsequent responses, the server sends Proxy-Authentication-Info + with directives the same as those for the Authentication-Info header + field. + + Note that in principle a client could be asked to authenticate itself + to both a proxy and an end-server, but never in the same response. + +4 Security Considerations + +4.1 Authentication of Clients using Basic Authentication + + The Basic authentication scheme is not a secure method of user + authentication, nor does it in any way protect the entity, which is + transmitted in cleartext across the physical network used as the + carrier. HTTP does not prevent additional authentication schemes and + encryption mechanisms from being employed to increase security or the + addition of enhancements (such as schemes to use one-time passwords) + to Basic authentication. + + + +Franks, et al. Standards Track [Page 19] + +RFC 2617 HTTP Authentication June 1999 + + + The most serious flaw in Basic authentication is that it results in + the essentially cleartext transmission of the user's password over + the physical network. It is this problem which Digest Authentication + attempts to address. + + Because Basic authentication involves the cleartext transmission of + passwords it SHOULD NOT be used (without enhancements) to protect + sensitive or valuable information. + + A common use of Basic authentication is for identification purposes + -- requiring the user to provide a user name and password as a means + of identification, for example, for purposes of gathering accurate + usage statistics on a server. When used in this way it is tempting to + think that there is no danger in its use if illicit access to the + protected documents is not a major concern. This is only correct if + the server issues both user name and password to the users and in + particular does not allow the user to choose his or her own password. + The danger arises because naive users frequently reuse a single + password to avoid the task of maintaining multiple passwords. + + If a server permits users to select their own passwords, then the + threat is not only unauthorized access to documents on the server but + also unauthorized access to any other resources on other systems that + the user protects with the same password. Furthermore, in the + server's password database, many of the passwords may also be users' + passwords for other sites. The owner or administrator of such a + system could therefore expose all users of the system to the risk of + unauthorized access to all those sites if this information is not + maintained in a secure fashion. + + Basic Authentication is also vulnerable to spoofing by counterfeit + servers. If a user can be led to believe that he is connecting to a + host containing information protected by Basic authentication when, + in fact, he is connecting to a hostile server or gateway, then the + attacker can request a password, store it for later use, and feign an + error. This type of attack is not possible with Digest + Authentication. Server implementers SHOULD guard against the + possibility of this sort of counterfeiting by gateways or CGI + scripts. In particular it is very dangerous for a server to simply + turn over a connection to a gateway. That gateway can then use the + persistent connection mechanism to engage in multiple transactions + with the client while impersonating the original server in a way that + is not detectable by the client. + +4.2 Authentication of Clients using Digest Authentication + + Digest Authentication does not provide a strong authentication + mechanism, when compared to public key based mechanisms, for example. + + + +Franks, et al. Standards Track [Page 20] + +RFC 2617 HTTP Authentication June 1999 + + + However, it is significantly stronger than (e.g.) CRAM-MD5, which has + been proposed for use with LDAP [10], POP and IMAP (see RFC 2195 + [9]). It is intended to replace the much weaker and even more + dangerous Basic mechanism. + + Digest Authentication offers no confidentiality protection beyond + protecting the actual password. All of the rest of the request and + response are available to an eavesdropper. + + Digest Authentication offers only limited integrity protection for + the messages in either direction. If qop=auth-int mechanism is used, + those parts of the message used in the calculation of the WWW- + Authenticate and Authorization header field response directive values + (see section 3.2 above) are protected. Most header fields and their + values could be modified as a part of a man-in-the-middle attack. + + Many needs for secure HTTP transactions cannot be met by Digest + Authentication. For those needs TLS or SHTTP are more appropriate + protocols. In particular Digest authentication cannot be used for any + transaction requiring confidentiality protection. Nevertheless many + functions remain for which Digest authentication is both useful and + appropriate. Any service in present use that uses Basic should be + switched to Digest as soon as practical. + +4.3 Limited Use Nonce Values + + The Digest scheme uses a server-specified nonce to seed the + generation of the request-digest value (as specified in section + 3.2.2.1 above). As shown in the example nonce in section 3.2.1, the + server is free to construct the nonce such that it may only be used + from a particular client, for a particular resource, for a limited + period of time or number of uses, or any other restrictions. Doing + so strengthens the protection provided against, for example, replay + attacks (see 4.5). However, it should be noted that the method + chosen for generating and checking the nonce also has performance and + resource implications. For example, a server may choose to allow + each nonce value to be used only once by maintaining a record of + whether or not each recently issued nonce has been returned and + sending a next-nonce directive in the Authentication-Info header + field of every response. This protects against even an immediate + replay attack, but has a high cost checking nonce values, and perhaps + more important will cause authentication failures for any pipelined + requests (presumably returning a stale nonce indication). Similarly, + incorporating a request-specific element such as the Etag value for a + resource limits the use of the nonce to that version of the resource + and also defeats pipelining. Thus it may be useful to do so for + methods with side effects but have unacceptable performance for those + that do not. + + + +Franks, et al. Standards Track [Page 21] + +RFC 2617 HTTP Authentication June 1999 + + +4.4 Comparison of Digest with Basic Authentication + + Both Digest and Basic Authentication are very much on the weak end of + the security strength spectrum. But a comparison between the two + points out the utility, even necessity, of replacing Basic by Digest. + + The greatest threat to the type of transactions for which these + protocols are used is network snooping. This kind of transaction + might involve, for example, online access to a database whose use is + restricted to paying subscribers. With Basic authentication an + eavesdropper can obtain the password of the user. This not only + permits him to access anything in the database, but, often worse, + will permit access to anything else the user protects with the same + password. + + By contrast, with Digest Authentication the eavesdropper only gets + access to the transaction in question and not to the user's password. + The information gained by the eavesdropper would permit a replay + attack, but only with a request for the same document, and even that + may be limited by the server's choice of nonce. + +4.5 Replay Attacks + + A replay attack against Digest authentication would usually be + pointless for a simple GET request since an eavesdropper would + already have seen the only document he could obtain with a replay. + This is because the URI of the requested document is digested in the + client request and the server will only deliver that document. By + contrast under Basic Authentication once the eavesdropper has the + user's password, any document protected by that password is open to + him. + + Thus, for some purposes, it is necessary to protect against replay + attacks. A good Digest implementation can do this in various ways. + The server created "nonce" value is implementation dependent, but if + it contains a digest of the client IP, a time-stamp, the resource + ETag, and a private server key (as recommended above) then a replay + attack is not simple. An attacker must convince the server that the + request is coming from a false IP address and must cause the server + to deliver the document to an IP address different from the address + to which it believes it is sending the document. An attack can only + succeed in the period before the time-stamp expires. Digesting the + client IP and time-stamp in the nonce permits an implementation which + does not maintain state between transactions. + + For applications where no possibility of replay attack can be + tolerated the server can use one-time nonce values which will not be + honored for a second use. This requires the overhead of the server + + + +Franks, et al. Standards Track [Page 22] + +RFC 2617 HTTP Authentication June 1999 + + + remembering which nonce values have been used until the nonce time- + stamp (and hence the digest built with it) has expired, but it + effectively protects against replay attacks. + + An implementation must give special attention to the possibility of + replay attacks with POST and PUT requests. Unless the server employs + one-time or otherwise limited-use nonces and/or insists on the use of + the integrity protection of qop=auth-int, an attacker could replay + valid credentials from a successful request with counterfeit form + data or other message body. Even with the use of integrity protection + most metadata in header fields is not protected. Proper nonce + generation and checking provides some protection against replay of + previously used valid credentials, but see 4.8. + +4.6 Weakness Created by Multiple Authentication Schemes + + An HTTP/1.1 server may return multiple challenges with a 401 + (Authenticate) response, and each challenge may use a different + auth-scheme. A user agent MUST choose to use the strongest auth- + scheme it understands and request credentials from the user based + upon that challenge. + + Note that many browsers will only recognize Basic and will require + that it be the first auth-scheme presented. Servers should only + include Basic if it is minimally acceptable. + + When the server offers choices of authentication schemes using the + WWW-Authenticate header, the strength of the resulting authentication + is only as good as that of the of the weakest of the authentication + schemes. See section 4.8 below for discussion of particular attack + scenarios that exploit multiple authentication schemes. + +4.7 Online dictionary attacks + + If the attacker can eavesdrop, then it can test any overheard + nonce/response pairs against a list of common words. Such a list is + usually much smaller than the total number of possible passwords. The + cost of computing the response for each password on the list is paid + once for each challenge. + + The server can mitigate this attack by not allowing users to select + passwords that are in a dictionary. + + + + + + + + + +Franks, et al. Standards Track [Page 23] + +RFC 2617 HTTP Authentication June 1999 + + +4.8 Man in the Middle + + Both Basic and Digest authentication are vulnerable to "man in the + middle" (MITM) attacks, for example, from a hostile or compromised + proxy. Clearly, this would present all the problems of eavesdropping. + But it also offers some additional opportunities to the attacker. + + A possible man-in-the-middle attack would be to add a weak + authentication scheme to the set of choices, hoping that the client + will use one that exposes the user's credentials (e.g. password). For + this reason, the client should always use the strongest scheme that + it understands from the choices offered. + + An even better MITM attack would be to remove all offered choices, + replacing them with a challenge that requests only Basic + authentication, then uses the cleartext credentials from the Basic + authentication to authenticate to the origin server using the + stronger scheme it requested. A particularly insidious way to mount + such a MITM attack would be to offer a "free" proxy caching service + to gullible users. + + User agents should consider measures such as presenting a visual + indication at the time of the credentials request of what + authentication scheme is to be used, or remembering the strongest + authentication scheme ever requested by a server and produce a + warning message before using a weaker one. It might also be a good + idea for the user agent to be configured to demand Digest + authentication in general, or from specific sites. + + Or, a hostile proxy might spoof the client into making a request the + attacker wanted rather than one the client wanted. Of course, this is + still much harder than a comparable attack against Basic + Authentication. + +4.9 Chosen plaintext attacks + + With Digest authentication, a MITM or a malicious server can + arbitrarily choose the nonce that the client will use to compute the + response. This is called a "chosen plaintext" attack. The ability to + choose the nonce is known to make cryptanalysis much easier [8]. + + However, no way to analyze the MD5 one-way function used by Digest + using chosen plaintext is currently known. + + The countermeasure against this attack is for clients to be + configured to require the use of the optional "cnonce" directive; + this allows the client to vary the input to the hash in a way not + chosen by the attacker. + + + +Franks, et al. Standards Track [Page 24] + +RFC 2617 HTTP Authentication June 1999 + + +4.10 Precomputed dictionary attacks + + With Digest authentication, if the attacker can execute a chosen + plaintext attack, the attacker can precompute the response for many + common words to a nonce of its choice, and store a dictionary of + (response, password) pairs. Such precomputation can often be done in + parallel on many machines. It can then use the chosen plaintext + attack to acquire a response corresponding to that challenge, and + just look up the password in the dictionary. Even if most passwords + are not in the dictionary, some might be. Since the attacker gets to + pick the challenge, the cost of computing the response for each + password on the list can be amortized over finding many passwords. A + dictionary with 100 million password/response pairs would take about + 3.2 gigabytes of disk storage. + + The countermeasure against this attack is to for clients to be + configured to require the use of the optional "cnonce" directive. + +4.11 Batch brute force attacks + + With Digest authentication, a MITM can execute a chosen plaintext + attack, and can gather responses from many users to the same nonce. + It can then find all the passwords within any subset of password + space that would generate one of the nonce/response pairs in a single + pass over that space. It also reduces the time to find the first + password by a factor equal to the number of nonce/response pairs + gathered. This search of the password space can often be done in + parallel on many machines, and even a single machine can search large + subsets of the password space very quickly -- reports exist of + searching all passwords with six or fewer letters in a few hours. + + The countermeasure against this attack is to for clients to be + configured to require the use of the optional "cnonce" directive. + +4.12 Spoofing by Counterfeit Servers + + Basic Authentication is vulnerable to spoofing by counterfeit + servers. If a user can be led to believe that she is connecting to a + host containing information protected by a password she knows, when + in fact she is connecting to a hostile server, then the hostile + server can request a password, store it away for later use, and feign + an error. This type of attack is more difficult with Digest + Authentication -- but the client must know to demand that Digest + authentication be used, perhaps using some of the techniques + described above to counter "man-in-the-middle" attacks. Again, the + user can be helped in detecting this attack by a visual indication of + the authentication mechanism in use with appropriate guidance in + interpreting the implications of each scheme. + + + +Franks, et al. Standards Track [Page 25] + +RFC 2617 HTTP Authentication June 1999 + + +4.13 Storing passwords + + Digest authentication requires that the authenticating agent (usually + the server) store some data derived from the user's name and password + in a "password file" associated with a given realm. Normally this + might contain pairs consisting of username and H(A1), where H(A1) is + the digested value of the username, realm, and password as described + above. + + The security implications of this are that if this password file is + compromised, then an attacker gains immediate access to documents on + the server using this realm. Unlike, say a standard UNIX password + file, this information need not be decrypted in order to access + documents in the server realm associated with this file. On the other + hand, decryption, or more likely a brute force attack, would be + necessary to obtain the user's password. This is the reason that the + realm is part of the digested data stored in the password file. It + means that if one Digest authentication password file is compromised, + it does not automatically compromise others with the same username + and password (though it does expose them to brute force attack). + + There are two important security consequences of this. First the + password file must be protected as if it contained unencrypted + passwords, because for the purpose of accessing documents in its + realm, it effectively does. + + A second consequence of this is that the realm string should be + unique among all realms which any single user is likely to use. In + particular a realm string should include the name of the host doing + the authentication. The inability of the client to authenticate the + server is a weakness of Digest Authentication. + +4.14 Summary + + By modern cryptographic standards Digest Authentication is weak. But + for a large range of purposes it is valuable as a replacement for + Basic Authentication. It remedies some, but not all, weaknesses of + Basic Authentication. Its strength may vary depending on the + implementation. In particular the structure of the nonce (which is + dependent on the server implementation) may affect the ease of + mounting a replay attack. A range of server options is appropriate + since, for example, some implementations may be willing to accept the + server overhead of one-time nonces or digests to eliminate the + possibility of replay. Others may satisfied with a nonce like the one + recommended above restricted to a single IP address and a single ETag + or with a limited lifetime. + + + + + +Franks, et al. Standards Track [Page 26] + +RFC 2617 HTTP Authentication June 1999 + + + The bottom line is that *any* compliant implementation will be + relatively weak by cryptographic standards, but *any* compliant + implementation will be far superior to Basic Authentication. + +5 Sample implementation + + The following code implements the calculations of H(A1), H(A2), + request-digest and response-digest, and a test program which computes + the values used in the example of section 3.5. It uses the MD5 + implementation from RFC 1321. + + File "digcalc.h": + +#define HASHLEN 16 +typedef char HASH[HASHLEN]; +#define HASHHEXLEN 32 +typedef char HASHHEX[HASHHEXLEN+1]; +#define IN +#define OUT + +/* calculate H(A1) as per HTTP Digest spec */ +void DigestCalcHA1( + IN char * pszAlg, + IN char * pszUserName, + IN char * pszRealm, + IN char * pszPassword, + IN char * pszNonce, + IN char * pszCNonce, + OUT HASHHEX SessionKey + ); + +/* calculate request-digest/response-digest as per HTTP Digest spec */ +void DigestCalcResponse( + IN HASHHEX HA1, /* H(A1) */ + IN char * pszNonce, /* nonce from server */ + IN char * pszNonceCount, /* 8 hex digits */ + IN char * pszCNonce, /* client nonce */ + IN char * pszQop, /* qop-value: "", "auth", "auth-int" */ + IN char * pszMethod, /* method from the request */ + IN char * pszDigestUri, /* requested URL */ + IN HASHHEX HEntity, /* H(entity body) if qop="auth-int" */ + OUT HASHHEX Response /* request-digest or response-digest */ + ); + +File "digcalc.c": + +#include +#include + + + +Franks, et al. Standards Track [Page 27] + +RFC 2617 HTTP Authentication June 1999 + + +#include +#include "digcalc.h" + +void CvtHex( + IN HASH Bin, + OUT HASHHEX Hex + ) +{ + unsigned short i; + unsigned char j; + + for (i = 0; i < HASHLEN; i++) { + j = (Bin[i] >> 4) & 0xf; + if (j <= 9) + Hex[i*2] = (j + '0'); + else + Hex[i*2] = (j + 'a' - 10); + j = Bin[i] & 0xf; + if (j <= 9) + Hex[i*2+1] = (j + '0'); + else + Hex[i*2+1] = (j + 'a' - 10); + }; + Hex[HASHHEXLEN] = '\0'; +}; + +/* calculate H(A1) as per spec */ +void DigestCalcHA1( + IN char * pszAlg, + IN char * pszUserName, + IN char * pszRealm, + IN char * pszPassword, + IN char * pszNonce, + IN char * pszCNonce, + OUT HASHHEX SessionKey + ) +{ + MD5_CTX Md5Ctx; + HASH HA1; + + MD5Init(&Md5Ctx); + MD5Update(&Md5Ctx, pszUserName, strlen(pszUserName)); + MD5Update(&Md5Ctx, ":", 1); + MD5Update(&Md5Ctx, pszRealm, strlen(pszRealm)); + MD5Update(&Md5Ctx, ":", 1); + MD5Update(&Md5Ctx, pszPassword, strlen(pszPassword)); + MD5Final(HA1, &Md5Ctx); + if (stricmp(pszAlg, "md5-sess") == 0) { + + + +Franks, et al. Standards Track [Page 28] + +RFC 2617 HTTP Authentication June 1999 + + + MD5Init(&Md5Ctx); + MD5Update(&Md5Ctx, HA1, HASHLEN); + MD5Update(&Md5Ctx, ":", 1); + MD5Update(&Md5Ctx, pszNonce, strlen(pszNonce)); + MD5Update(&Md5Ctx, ":", 1); + MD5Update(&Md5Ctx, pszCNonce, strlen(pszCNonce)); + MD5Final(HA1, &Md5Ctx); + }; + CvtHex(HA1, SessionKey); +}; + +/* calculate request-digest/response-digest as per HTTP Digest spec */ +void DigestCalcResponse( + IN HASHHEX HA1, /* H(A1) */ + IN char * pszNonce, /* nonce from server */ + IN char * pszNonceCount, /* 8 hex digits */ + IN char * pszCNonce, /* client nonce */ + IN char * pszQop, /* qop-value: "", "auth", "auth-int" */ + IN char * pszMethod, /* method from the request */ + IN char * pszDigestUri, /* requested URL */ + IN HASHHEX HEntity, /* H(entity body) if qop="auth-int" */ + OUT HASHHEX Response /* request-digest or response-digest */ + ) +{ + MD5_CTX Md5Ctx; + HASH HA2; + HASH RespHash; + HASHHEX HA2Hex; + + // calculate H(A2) + MD5Init(&Md5Ctx); + MD5Update(&Md5Ctx, pszMethod, strlen(pszMethod)); + MD5Update(&Md5Ctx, ":", 1); + MD5Update(&Md5Ctx, pszDigestUri, strlen(pszDigestUri)); + if (stricmp(pszQop, "auth-int") == 0) { + MD5Update(&Md5Ctx, ":", 1); + MD5Update(&Md5Ctx, HEntity, HASHHEXLEN); + }; + MD5Final(HA2, &Md5Ctx); + CvtHex(HA2, HA2Hex); + + // calculate response + MD5Init(&Md5Ctx); + MD5Update(&Md5Ctx, HA1, HASHHEXLEN); + MD5Update(&Md5Ctx, ":", 1); + MD5Update(&Md5Ctx, pszNonce, strlen(pszNonce)); + MD5Update(&Md5Ctx, ":", 1); + if (*pszQop) { + + + +Franks, et al. Standards Track [Page 29] + +RFC 2617 HTTP Authentication June 1999 + + + MD5Update(&Md5Ctx, pszNonceCount, strlen(pszNonceCount)); + MD5Update(&Md5Ctx, ":", 1); + MD5Update(&Md5Ctx, pszCNonce, strlen(pszCNonce)); + MD5Update(&Md5Ctx, ":", 1); + MD5Update(&Md5Ctx, pszQop, strlen(pszQop)); + MD5Update(&Md5Ctx, ":", 1); + }; + MD5Update(&Md5Ctx, HA2Hex, HASHHEXLEN); + MD5Final(RespHash, &Md5Ctx); + CvtHex(RespHash, Response); +}; + +File "digtest.c": + + +#include +#include "digcalc.h" + +void main(int argc, char ** argv) { + + char * pszNonce = "dcd98b7102dd2f0e8b11d0f600bfb0c093"; + char * pszCNonce = "0a4f113b"; + char * pszUser = "Mufasa"; + char * pszRealm = "testrealm@host.com"; + char * pszPass = "Circle Of Life"; + char * pszAlg = "md5"; + char szNonceCount[9] = "00000001"; + char * pszMethod = "GET"; + char * pszQop = "auth"; + char * pszURI = "/dir/index.html"; + HASHHEX HA1; + HASHHEX HA2 = ""; + HASHHEX Response; + + DigestCalcHA1(pszAlg, pszUser, pszRealm, pszPass, pszNonce, +pszCNonce, HA1); + DigestCalcResponse(HA1, pszNonce, szNonceCount, pszCNonce, pszQop, + pszMethod, pszURI, HA2, Response); + printf("Response = %s\n", Response); +}; + + + + + + + + + + + +Franks, et al. Standards Track [Page 30] + +RFC 2617 HTTP Authentication June 1999 + + +6 Acknowledgments + + Eric W. Sink, of AbiSource, Inc., was one of the original authors + before the specification underwent substantial revision. + + In addition to the authors, valuable discussion instrumental in + creating this document has come from Peter J. Churchyard, Ned Freed, + and David M. Kristol. + + Jim Gettys and Larry Masinter edited this document for update. + +7 References + + [1] Berners-Lee, T., Fielding, R. and H. Frystyk, "Hypertext + Transfer Protocol -- HTTP/1.0", RFC 1945, May 1996. + + [2] Fielding, R., Gettys, J., Mogul, J., Frysyk, H., Masinter, L., + Leach, P. and T. Berners-Lee, "Hypertext Transfer Protocol -- + HTTP/1.1", RFC 2616, June 1999. + + [3] Rivest, R., "The MD5 Message-Digest Algorithm", RFC 1321, April + 1992. + + [4] Freed, N. and N. Borenstein. "Multipurpose Internet Mail + Extensions (MIME) Part One: Format of Internet Message Bodies", + RFC 2045, November 1996. + + [5] Dierks, T. and C. Allen "The TLS Protocol, Version 1.0", RFC + 2246, January 1999. + + [6] Franks, J., Hallam-Baker, P., Hostetler, J., Leach, P., + Luotonen, A., Sink, E. and L. Stewart, "An Extension to HTTP : + Digest Access Authentication", RFC 2069, January 1997. + + [7] Berners Lee, T, Fielding, R. and L. Masinter, "Uniform Resource + Identifiers (URI): Generic Syntax", RFC 2396, August 1998. + + [8] Kaliski, B.,Robshaw, M., "Message Authentication with MD5", + CryptoBytes, Sping 1995, RSA Inc, + (http://www.rsa.com/rsalabs/pubs/cryptobytes/spring95/md5.htm) + + [9] Klensin, J., Catoe, R. and P. Krumviede, "IMAP/POP AUTHorize + Extension for Simple Challenge/Response", RFC 2195, September + 1997. + + [10] Morgan, B., Alvestrand, H., Hodges, J., Wahl, M., + "Authentication Methods for LDAP", Work in Progress. + + + + +Franks, et al. Standards Track [Page 31] + +RFC 2617 HTTP Authentication June 1999 + + +8 Authors' Addresses + + John Franks + Professor of Mathematics + Department of Mathematics + Northwestern University + Evanston, IL 60208-2730, USA + + EMail: john@math.nwu.edu + + + Phillip M. Hallam-Baker + Principal Consultant + Verisign Inc. + 301 Edgewater Place + Suite 210 + Wakefield MA 01880, USA + + EMail: pbaker@verisign.com + + + Jeffery L. Hostetler + Software Craftsman + AbiSource, Inc. + 6 Dunlap Court + Savoy, IL 61874 + + EMail: jeff@AbiSource.com + + + Scott D. Lawrence + Agranat Systems, Inc. + 5 Clocktower Place, Suite 400 + Maynard, MA 01754, USA + + EMail: lawrence@agranat.com + + + Paul J. Leach + Microsoft Corporation + 1 Microsoft Way + Redmond, WA 98052, USA + + EMail: paulle@microsoft.com + + + + + + + +Franks, et al. Standards Track [Page 32] + +RFC 2617 HTTP Authentication June 1999 + + + Ari Luotonen + Member of Technical Staff + Netscape Communications Corporation + 501 East Middlefield Road + Mountain View, CA 94043, USA + + + Lawrence C. Stewart + Open Market, Inc. + 215 First Street + Cambridge, MA 02142, USA + + EMail: stewart@OpenMarket.com + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Franks, et al. Standards Track [Page 33] + +RFC 2617 HTTP Authentication June 1999 + + +9. Full Copyright Statement + + Copyright (C) The Internet Society (1999). All Rights Reserved. + + This document and translations of it may be copied and furnished to + others, and derivative works that comment on or otherwise explain it + or assist in its implementation may be prepared, copied, published + and distributed, in whole or in part, without restriction of any + kind, provided that the above copyright notice and this paragraph are + included on all such copies and derivative works. However, this + document itself may not be modified in any way, such as by removing + the copyright notice or references to the Internet Society or other + Internet organizations, except as needed for the purpose of + developing Internet standards in which case the procedures for + copyrights defined in the Internet Standards process must be + followed, or as required to translate it into languages other than + English. + + The limited permissions granted above are perpetual and will not be + revoked by the Internet Society or its successors or assigns. + + This document and the information contained herein is provided on an + "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING + TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING + BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION + HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF + MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + +Acknowledgement + + Funding for the RFC Editor function is currently provided by the + Internet Society. + + + + + + + + + + + + + + + + + + + +Franks, et al. Standards Track [Page 34] + -- cgit v1.2.3