diff options
Diffstat (limited to '.homeinstall')
| -rw-r--r-- | .homeinstall/README.md | 84 | ||||
| -rw-r--r-- | .homeinstall/hubzilla-config.txt.template | 37 | ||||
| -rwxr-xr-x | .homeinstall/hubzilla-setup.sh | 39 |
3 files changed, 80 insertions, 80 deletions
diff --git a/.homeinstall/README.md b/.homeinstall/README.md index c0de914a1..ee2261b30 100644 --- a/.homeinstall/README.md +++ b/.homeinstall/README.md @@ -2,10 +2,12 @@ Run hubzilla-setup.sh for an unattended installation of hubzilla. -The script is known to work with Debian 8.3 stable (Jessie) +The script is known to work with Debian 9 stable (Stretch) -+ Home-PC (Debian-8.3.0-amd64) -+ DigitalOcean droplet (Debian 8.3 x64 / 512 MB Memory / 20 GB Disk / NYC3) ++ Home-PC (Debian-9.2-amd64) ++ Raspian (Debian-9.3 on a Rapberry 3) + +This script is not recommended for Debian 8 (Jessie) any longer. # Step-by-Step Overwiew @@ -14,12 +16,12 @@ The script is known to work with Debian 8.3 stable (Jessie) Hardware + Internet connection and router at home -+ Mini-pc connected to your router ++ Mini-pc connected to your router (a Raspberry 3 will do it too) + USB drive for backups Software -+ Fresh installation of Debian on your mini-pc ++ Fresh installation of Debian 9 (Stretch) on your mini-pc + Router with open ports 80 and 443 for your Debian ## The basic steps (quick overview) @@ -32,7 +34,8 @@ Software - git clone https://github.com/redmatrix/hubzilla.git html - cp .homeinstall/hubzilla-config.txt.template .homeinstall/hubzilla-config.txt - nano .homeinstall/hubzilla-config.txt - - Enter your values there: db pass, domain, values for dyn DNS + - Read the comments carefully + - Enter your values: db pass, domain, values for dyn DNS - hubzilla-setup.sh as root - ... wait, wait, wait until the script is finised - reboot @@ -51,18 +54,36 @@ The installation will create a daily backup. If the backup process does not find an external device than the backup goes to the internal disk. -The USB drive must be compatible with an encrpyted filesystem LUKS + ext4. +The USB drive must be compatible with the filesystems + +- ext4 (if you do not want to encrypt the USB) +- LUKS + ext4 (if you want to encrypt the USB) ## Preparations Software ### Install Debian Linux on the Mini-PC -Download the stable Debian at https://www.debian.org/ +Download the stable Debian at https://www.debian.org/ +(Debian 8 is no longer supported.) + +Create bootable USB drive with Debian on it.You could use + +- unetbootin, https://en.wikipedia.org/wiki/UNetbootin +- or simply the linux command "dd" + +Example for command dd... -Create bootable USB drive with Debian on it. You could use the programm -unetbootin, https://en.wikipedia.org/wiki/UNetbootin + su - + dd if=2017-11-29-raspbian-stretch.img of=/dev/mmcblk0 -Switch of your mini pc, plug in your USB drive and start the mini pc from the +Do not forget to unmount the SD card before and check if unmounted like in this example... + + su - + umount /dev/mmcblk0* + df -h + + +Switch off your mini pc, plug in your USB drive and start the mini pc from the stick. Install Debian. Follow the instructions of the installation. ### Configure your Router @@ -81,26 +102,21 @@ You can use subdomains as well There are two way to get a domain -- buy a domain (recommended) or +- buy a domain, or - register a free subdomain -### Method 1: Get yourself an own Domain (recommended) +### Method 1: Buy an own Domain -...for example at selfHOST.de +...for example buy at selfHOST.de -### Method 2 Register a (free) Subdomain +The cost are around 10,- € once and 1,50 € per month (2017). -Register a free subdomain for example at +### Method 2 Register a (free) Subdomain -- freeDNS -- selfHOST +...for example register at freeDNS -WATCH THIS: A free subdomain is not the prefered way to get a domain name. Why? +Follow the instructions in .homeinstall/hubzilla-config.txt. -Let's encrpyt issues a limited number of certificates each -day. Possibly other users of this domain will try to issue a certificate -at the same day as you do. So make sure you choose a domain with as less subdomains as -possible. ## Install Hubzilla on your Debian @@ -135,7 +151,7 @@ Copy the template file cp hubzilla-config.txt.template hubzilla-config.txt -Change the file "hubzilla-config.txt". Read the instructions there and enter your values. +Change the file "hubzilla-config.txt". Read the instructions there carefully and enter your values. nano hubzilla-config.txt @@ -146,7 +162,7 @@ Run the script Wait... The script should not finish with an error message. In a webbrowser open your domain. -Expected: A test page of hubzilla is shown. All checks there shoulg be +Expected: A test page of hubzilla is shown. All checks there should be successfull. Go on... Expected: A page for the Hubzilla server configuration shows up. @@ -162,3 +178,21 @@ Leave db type "MySQL" untouched. Follow the instructions in the next pages. +## Note for the Rasperry + +The script was tested with an Raspberry 3 under Raspian (Debian 9.3, 2017-11-29-raspbian-stretch.img). + +It is recommended to deinstall these programms to avoid endless updates. Use... + + sudo apt-get purge wolfram-engine sonic-pi + sudo apt-get autoremove + +It is recommended to run the Raspi without graphical frontend (X-Server). Use... + + sudo raspi-config + +to boot the Rapsi to the client console. + +DO NOT FORGET TO CHANGE THE DEFAULT PASSWORD FOR USER PI! + + diff --git a/.homeinstall/hubzilla-config.txt.template b/.homeinstall/hubzilla-config.txt.template index 040b0f2f4..2776ccd27 100644 --- a/.homeinstall/hubzilla-config.txt.template +++ b/.homeinstall/hubzilla-config.txt.template @@ -70,15 +70,17 @@ selfhost_pass= # freedns_key=U1Z6aGt2R0NzMFNPNWRjbWxxZGpsd093OjE1Mzg5NDE5 # # -#freedns_key= +freedns_key= ############################################### ### OPTIONAL - Backup to external device ###### # # The script can use an external device for the daily backup. -# The file system of the device (USB stick for example) must be compatible -# with encrypted LUKS + ext4 +# The file system of the device (USB stick for example) must be compatible with +# +# - encrypted LUKS + ext4, or +# - ext4 # # You should test to mount the device befor you run the script # (hubzilla-setup.sh). @@ -113,28 +115,22 @@ selfhost_pass= # lsof /media/hubzilla_backup # # If you leave the following parameters +# # - "backup_device_name" and # - "backup_device_pass" +# # empty the script will create daily backups on the internal disk (which could # save you as well). # # Example: backup_device_name=/dev/sdc1 # +# Leave "backup_device_pass=" empty if the external device is not encrypted. +# backup_device_name= backup_device_pass= ############################################### -### OPTIONAL - Owncloud - deprecated ########## -# -# To install owncloud: owncloud=y -# Leave empty if you don't want to install owncloud -# -#owncloud= - - - -############################################### ### OPTIONAL - do not mess with things below ## # (...if you are not certain) # @@ -160,18 +156,3 @@ mysqlpass=$db_pass # Example: phpmyadminpass="aber hallo has blanks in it" phpmyadminpass=$db_pass -# TODO Prepare hubzilla for programmers -# - install eclipse and plugins -# - install xdebug to debug the php with eclipse -# - weaken permissions on /var/www/html -# - manual steps after this script -# * in eclipse: install plugins for php git hub -# * in eclipse: configure firefox (chrome,...) as browser to run with the php debuger -# * in eclipse: switch php debugger from zend to xdebug -# * in eclipse: add local hubzilla github repository -# -# Which user will use eclipse? -# Leave this empty if you do not want to prepare hubzilla for debugging -# -#developer_name= - diff --git a/.homeinstall/hubzilla-setup.sh b/.homeinstall/hubzilla-setup.sh index c83fb8de9..cc8ba4db3 100755 --- a/.homeinstall/hubzilla-setup.sh +++ b/.homeinstall/hubzilla-setup.sh @@ -43,15 +43,10 @@ # Security - password is the same for mysql-server, phpmyadmin and hubzilla db # - The script runs into installation errors for phpmyadmin if it uses # different passwords. For the sake of simplicity one singel password. -# -# Security - suhosin for PHP -# - The script does not install suhosin. -# - Is the security package suhosin usefull or not usefull? # # Hubzilla - email verification # - The script switches off email verification off in all htconfig.tpl. # Example: /var/www/html/view/en/htconfig.tpl -# - Is this a silly idea or not? # # # Remove Hubzilla (for a fresh start using the script) @@ -253,11 +248,9 @@ function install_sendmail { } function install_php { - # openssl and mbstring are included in libapache2-mod-php5 - # to_to: php5-suhosin + # openssl and mbstring are included in libapache2-mod-php print_info "installing php..." - nocheck_install "libapache2-mod-php5 php5 php-pear php5-xcache php5-curl php5-mcrypt php5-gd" - php5enmod mcrypt + nocheck_install "libapache2-mod-php php php-pear php-curl php-mcrypt php-gd" } function install_mysql { @@ -277,18 +270,17 @@ function install_mysql { # want to be prompted for it then this can be arranged by preseeding the # DebConf database with the required information. # - # echo mysql-server-5.5 mysql-server/root_password password xyzzy | debconf-set-selections - # echo mysql-server-5.5 mysql-server/root_password_again password xyzzy | debconf-set-selections + # echo mysql-server mysql-server/root_password password xyzzy | debconf-set-selections + # echo mysql-server mysql-server/root_password_again password xyzzy | debconf-set-selections # print_info "installing mysql..." if [ -z "$mysqlpass" ] then die "mysqlpass not set in $configfile" fi - echo mysql-server-5.5 mysql-server/root_password password $mysqlpass | debconf-set-selections - echo mysql-server-5.5 mysql-server/root_password_again password $mysqlpass | debconf-set-selections - nocheck_install "php5-mysql mysql-server mysql-client" - php5enmod mcrypt + echo mysql-server mysql-server/root_password password $mysqlpass | debconf-set-selections + echo mysql-server mysql-server/root_password_again password $mysqlpass | debconf-set-selections + nocheck_install "php-mysql mysql-server mysql-client" } function install_phpmyadmin { @@ -305,7 +297,7 @@ function install_phpmyadmin { echo phpmyadmin phpmyadmin/reconfigure-webserver multiselect apache2 | debconf-set-selections nocheck_install "phpmyadmin" - # It seems to be not neccessary to check rewrite.load because it comes + # It seems not to be neccessary to check rewrite.load because it comes # with the installation. To be sure you could check this manually by: # # nano /etc/apache2/mods-available/rewrite.load @@ -327,6 +319,7 @@ function install_phpmyadmin { echo "Include /etc/phpmyadmin/apache.conf" >> /etc/apache2/apache2.conf fi service apache2 restart + /etc/init.d/mysql start } function create_hubzilla_db { @@ -455,11 +448,6 @@ function configure_cron_selfhost { fi } -function install_git { - print_info "installing git..." - nocheck_install "git" -} - function install_letsencrypt { print_info "installing let's encrypt ..." # check if user gave domain @@ -511,6 +499,8 @@ END then die "Failed to load $url_http" fi + # accept terms of service of letsencrypt + ./dehydrated --register --accept-terms # run script dehydrated # ./dehydrated --cron --config $le_dir/config.sh @@ -607,7 +597,6 @@ function install_hubzilla_plugins { echo "# cd /var/www/html/.homeinstall" >> $plugin_install echo "# ./hubzilla-setup.sh" >> $plugin_install echo "https://gitlab.com/zot/ownmapp.git ownMapp" >> $plugin_install - echo "https://gitlab.com/zot/hubzilla-chess.git chess" >> $plugin_install fi # install plugins while read -r line; do @@ -801,10 +790,7 @@ echo "# update" >> /var/www/$hubzilladaily echo "echo \"\$(date) - updating dehydrated...\"" >> /var/www/$hubzilladaily echo "git -C /var/www/letsencrypt/ pull" >> /var/www/$hubzilladaily echo "echo \"\$(date) - updating hubhilla core...\"" >> /var/www/$hubzilladaily -echo "git -C /var/www/html/ pull" >> /var/www/$hubzilladaily -echo "echo \"\$(date) - updating hubhilla addons...\"" >> /var/www/$hubzilladaily -echo "git -C /var/www/html/addon/ pull" >> /var/www/$hubzilladaily -echo "bash /var/www/html/$plugins_update" >> /var/www/$hubzilladaily +echo "(cd /var/www/html/ ; util/udall)" >> /var/www/$hubzilladaily echo "chown -R www-data:www-data /var/www/html/ # make all accessable for the webserver" >> /var/www/$hubzilladaily echo "chown root:www-data /var/www/html/.htaccess" >> /var/www/$hubzilladaily echo "chmod 0644 /var/www/html/.htaccess # www-data can read but not write it" >> /var/www/$hubzilladaily @@ -894,7 +880,6 @@ install_run_selfhost ping_domain configure_cron_freedns configure_cron_selfhost -install_git install_letsencrypt configure_apache_for_https check_https |