Merge pull request #623 from anaqreon/2.0RC-doco

Headings restructuring and some content rearrangement

1 files changed, 24 insertions, 24 deletions

diff --git a/doc/admin/administrator_guide.md b/doc/admin/administrator_guide.md
index bb5c821ee..219673c50 100644
--- a/doc/admin/administrator_guide.md
+++ b/doc/admin/administrator_guide.md
@@ -1,5 +1,5 @@
 
-# Overview
+### Overview
 
 $Projectname is more than a simple web application. It is a
 complex communications system which more closely resembles an email server
@@ -16,7 +16,7 @@ websites. It will run on most any Linux VPS system. Windows LAMP platforms
 such as XAMPP and WAMP are not officially supported at this time however
 we welcome patches if you manage to get it working.
 
-# Where to find more help
+### Where to find more help
 If you encounter problems or have issues not addressed in this documentation, 
 please let us know via the [Github issue
 tracker](https://github.com/redmatrix/hubzilla/issues). Please be as clear as you
@@ -27,14 +27,14 @@ in existence we may have only limited ability to debug your PHP installation or
 acquire any missing modules * but we will do our best to solve any general code
 issues.
 
-# Before you begin 
+### Before you begin 
 
-## Choose a domain name or subdomain name for your server
+#### Choose a domain name or subdomain name for your server
 
 $Projectname can only be installed into the root of a domain or sub-domain, and can 
 not be installed using alternate TCP ports.
 
-## Decide if you will use SSL and obtain an SSL certificate before software installation
+#### Decide if you will use SSL and obtain an SSL certificate before software installation
 
 You SHOULD use SSL. If you use SSL, you MUST use a "browser-valid" certificate.  
 *You MUST NOT use self-signed certificates!*
@@ -74,14 +74,14 @@ it is installed, and an existing directory in this location may prevent some of
 these services from working correctly. This should not be a problem with Apache,
 but may be an issue with nginx or other web server platforms.
 
-# Deployment
+### Deployment
 There are several ways to deploy a new hub.
 
 * Manual installation on an existing server
 * Automated installation on an existing server using a shell script
 * Automated deployment using an OpenShift virtual private server (VPS)
 
-# Requirements
+### Requirements
 * Apache with mod-rewrite enabled and "AllowOverride All" so you can use a 
   local .htaccess file. Some folks have successfully used nginx and lighttpd.
   Example config scripts are available for these platforms in doc/install.
@@ -111,7 +111,7 @@ PHP might differ from the _webserver_ version
 
 # Manual Installation #
 
-## Unpack the $Projectname files into the root of your web server document area ###
+#### Unpack the $Projectname files into the root of your web server document area ###
 If you copy the directory tree to your webserver, make sure that you include the
 hidden files like .htaccess.
 
@@ -148,14 +148,14 @@ web-based administrative tools to function:
 * `view/theme`
 * `widget`
 
-## Official addons
-### Installation
+#### Official addons
+##### Installation
 Navigate to your webThen you should clone the addon repository (separately). We'll give this repository a nickname of 'hzaddons'. You can pull in other hubzilla addon repositories by giving them different nicknames::
 
     cd mywebsite
     util/add_addon_repo https://github.com/redmatrix/hubzilla-addons.git hzaddons
 
-### Updating
+##### Updating
 For keeping the addon tree updated, you should be on your top level website directory and issue an update command for that repository::
 
     cd mywebsite
@@ -167,10 +167,10 @@ Create searchable representations of the online documentation. You may do this
     cd mywebsite
     util/importdoc
 
-# Automated installation via the .homeinstall shell script
+### Automated installation via the .homeinstall shell script
 There is a shell script in (``.homeinstall/hubzilla-setup.sh``) that will install $Projectname and its dependencies on a fresh installation of Debian 8.3 stable (Jessie). It should work on similar Linux systems but your results may vary.
 
-## Requirements
+#### Requirements
 The installation script was originally designed for a small hardware server behind your home router. However, it has been tested on several systems running Debian 8.3:
 
 * Home-PC (Debian-8.3.0-amd64)
@@ -183,7 +183,7 @@ The installation script was originally designed for a small hardware server behi
 
 * DigitalOcean droplet (Debian 8.3 x64 / 512 MB Memory / 20 GB Disk / NYC3)
 
-## Overview of installation steps
+#### Overview of installation steps
 1. `apt-get install git`
 1. `mkdir -p /var/www/html`
 1. `cd /var/www/html`
@@ -196,7 +196,7 @@ The installation script was originally designed for a small hardware server behi
 1. `service apache2 reload`
 1. Open your domain with a browser and step throught the initial configuration of $Projectname.
 
-# Service Classes
+### Service Classes
 
 Service classes allow you to set limits on system resources by limiting what individual
 accounts can do, including file storage and top-level post limits. Define custom service 
@@ -262,8 +262,8 @@ set the account that owns channel 'blogchan' to service class 'firstclass' (with
 * chatters_inroom - maximum chatters per room
 * access_tokens - maximum number of Guest Access Tokens per channel
 
-# Theme management
-## Repo management example 
+### Theme management
+#### Repo management example 
 1. Navigate to your hub web root
 
   ```
@@ -280,9 +280,9 @@ set the account that owns channel 'blogchan' to service class 'firstclass' (with
   root@hub:/var/www#  util/update_theme_repo DeadSuperHero
   ```
 
-# Channel Directory
+### Channel Directory
 
-## Keywords
+#### Keywords
 
 There is a "tag cloud" of keywords that can appear on the channel directory page. 
 If you wish to hide these keywords, which are drawn from the directory server, you 
@@ -296,9 +296,9 @@ empty:
 
     util/config system directory_server ""
 
-# Upgrading from RedMatrix to $Projectname
+### Upgrading from RedMatrix to $Projectname
 
-## How to migrate an individual channel from RedMatrix to $Projectname
+#### How to migrate an individual channel from RedMatrix to $Projectname
 
 1. Clone the channel by opening an account on a $Projectname hub and performing a basic import (not content) from the original RedMatrix hub. Give your new clone time to sync connections and settings.
 1. Export individual channel content from your RedMatrix hub to a set of JSON text files using the red.hub/uexport tool. Do this in monthly increments if necessary.
@@ -307,8 +307,8 @@ empty:
 1. After successful import (check!) delete your channel on the old RedMatrix Server.
 1. On the $Projectname server visit new.hub/locs and upgrade to your channel to a primary one. And when the old Redmatrix server is still listed delete them here as well. Press "Sync" to inform all other server in the grid.
 
-# Troubleshooting
-## Log files
+### Troubleshooting
+#### Log files
 
 There are three different log facilities.
 
@@ -338,7 +338,7 @@ git checkout file.php
 
 To immediately clear out all the extra logging stuff you added.  Use the information from this log and any detail you can provide from your investigation of the problem to file your bug report - unless your analysis points to the source of the problem. In that case, just fix it. 
 
-### Rotating log files
+##### Rotating log files
 
 1. Enable the **logrot** addon in the official [hubzilla-addons](https://github.com/redmatrix/hubzilla-addons) repo
 1. Create a directory in your web root called `log` with webserver write permissions